Anaheim Scientific P773 - Total Dissolved Solids (TDS) Meter
Contents
1. 6 5 Electrode Replacement 1 As long as the electrode can be calibrated and remains responsive it is still useful When either of these begin to fail you will need to replace the electrode This is not covered under the warranty Unscrew the electrode collar and remove it completely Pull the electrode module out from the tester Plug in a new electrode module into the tester socket carefully Replace and tighten the electrode collar to make a good seal oe a a Ze Make sure to calibrate the new electrode before usage anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 7 Technical Specifications Operating 5 C to 50 C Environment 0 to 90 R H Storage 0 C to 50 C Environment 0 to 90 R H Two 3 V Lithium CR2032 Batteries Expected Battery Life 100 hours continuous Display 3 Digit 21 x 18 mm LCD 8 x 7 1 point manual via trimmer span To ensure the most current version of this manual please download the current version here http anaheimscientific com images manuals P773_manual pdf For current up to date product information please visit anaheimscientific com anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 8 Maintenance This is a precision instrument To guarantee its performances be sure to use it or keep it stored within the suitable environmental2. display is stabilized Adjust the reading to 94 940 ppm at 25 C by turning the trimmer Span located at left side of battery compartment with the calibration screwdriver Calibration is complete There is no need to calibrate before each usage Calibration should be performed every two weeks or after 10 times of usage anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 6 3 Measuring with the Conductivity Meter 1 After calibration rinse the electrode with clean water and wipe it dry Do not JIN touch or wipe the surface of the inner black sensor of the electrode Dip the electrode into the sample solution to be measured Stir gently and wait until a stable reading can be obtained 2 Read the measurement on the display The reading should be multiplied by a factor of 10 to obtain the true conductivity value 3 After measurement rinse the electrode with clean water and replace the protective cap Do not touch or wipe the surface of the inner black sensor of AN the electrode 6 4 Changing the battery 1 The installed Lithium CR2032 batteries have a typical life span of 100 hours Replace the battery when the display begins to fade or flash Loosen the battery compartment cap Replace the old batteries with fresh Lithium CR2032 batteries noting the polarity Replace the battery compartment cap tightly E Ge Ge Recalibrate the meter after changing the batteries
3. use Some states do not allow limitations of incidental or consequential damages So the above limitation or exclusion may not apply to you This warranty gives you specific rights and you may have other rights which vary from state to state Anaheim Scientific 22820 Savi Ranch Parkway Yorba Linda CA 92887 anaheimscientific com 714 921 9095 anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 Page intentionally left blank Page intentionally left blank F AKNAHEIM SCIENTIFIC 22820 Savi Ranch Parkway Yorba Linda CA 92887 www anaheimscientific com 2012 Anaheim Scientific
4. ANAHEIM SCIENTIFIC User Manual Model P773 Total Dissolved Solids TDS Meter Table of Contents 1 INTRODUC TION asana aana a anengen Tag aa aana a aaa aab daa aia daana ina aaa aaa a aa a adana da 1 2 SAFETY SUMMARY 2 c ccccccececnecececnecececnecececnececeeecnececusounecusesnscususeseueesaenuensaeaneeaes 2 3 COMPLIANCE STATEMENTS ccccccccecececeecececeeceeeeeeeeeeeaueeeusueeeeesueeseueueaseneueaseeeeeas 2 4 PRODUCT CONTENTS AND INSPECTION Qu 2 ccccceceecececeecececeeeeceeeeeeseeeseeeeeeseeeeees 3 5 DEVICE DESCRIPTION ccccccceceececeeeececeeeeceseceeeeeesaueeeusauaueusueeeeusaeeueeeueuseeeueaseeseeas 4 6 OPERATING INSTRUCTIONG 1 0 ccccceccecececeececeeeeceeeseeeeeeseueesuseeeeeesuseueeeueaseeeueaneeeeeas 4 6 1 Ga te ON 4 6e CAUBPRATION eebe 4 6 3 MEASURING WITH THE CONDUCTIVITY MEIER 5 6 4 CHANGING THE BATTER 5 6 5 ELECTRODE REPLACEMENT asessssssesssnernnrnrrrnrrnrnnrnrrrnrnnrrrnrrnrn rnnr nrar nr rrr rnr rnnr anneren 5 7 TECHNICAL SPECIFICATIONS ek KN KK NEEN REENEN RRE K NR ENKER KN EN KKK ENK KKNR NEEN 6 8 MAINTENANCE areas cece paises etre cece a naba uga agan wata ad aa ai aaa daa aa aa aaa anaa abane dana daa a ae 7 9 SERVICE INFORMATION kk KKK KEN KK NK EN ENKEN KAREN REENEN REENEN REENEN RN REENEN 7 9 1 SERVICE REPAIR OR CGALUIDDBATIONS nrerin 7 92 WARRANTY eege a Ka aana a aha a eee tree come 8 1 Introduction The P773 is a wide range pocket sized total dissolved solids mete
5. conditions given in the Technical Specifications Be sure to turn it off after use To store the instrument for an extended period of time remove the batteries to avoid any damage to its inner components 9 Service Information 9 1 Service Repair or Calibrations The following are instructions regarding policies for servicing repairing or calibrating Anaheim Scientific products Turnaround time is usually less than ten 10 working days unless expedite service is requested and pre arranged Send an email to service anaheimscientific com requesting an RMA number specifying your request for either service repair and or calibration with your product s model number Once you receive a reply from service anaheimscientific com you will be asked to ship prepaid to the address below Package the unit carefully using filler or bubble wrap and if possible ship in original box Ship each unit separately Anaheim Scientific 1s not responsible for any shipping damage that may occur Include a packing list with each unit shipped stating what type of service 1s required and include the return shipping information name address and telephone number If the unit is in warranty please provide the following proof of purchase or copy of the original invoice If the unit 1s out of warranty prepayment is required by Check Money Order or Credit Card Return all merchandise to Anaheim Scientific with pre paid shipping The flat rate repair charge f
6. or Non Warranty Service does not include return shipping Return shipping to locations in North American is included for Warranty Service For overnight shipments and non North American shipping fees please contact Anaheim Scientific anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 Anaheim Scientific ATTN Service Repair 22820 Savi Ranch Parkway Yorba Linda CA 92887 anaheimscientific com 714 921 9095 9 2 Warranty Limited Two Year Warranty Anaheim Scientific warrants to the original purchaser that its products and the component parts thereof will be free from defects in workmanship and materials for a period of two years from date of purchase Anaheim Scientific will without charge repair or replace at its option defective product or component parts Returned product must be accompanied by proof of the purchase date in the form of a sales receipt To obtain warranty coverage in the U S A this product must be registered by completing a warranty registration form on anaheimscientific com within fifteen 15 days of purchase Exclusions This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs The warranty is void if the serial number is altered defaced or removed Anaheim Scientific shall not be liable for any consequential damages including without limitation damages resulting from loss of
7. r perfect for use in field environments such as Hydroponics Fish farming Agriculture Swimming pools and spas Waste water systems Plating industry Food industry Pharmaceutical and Medical Cooling towers Chemical industry Having a rugged waterproof housing and replaceable electrodes this meter will give long durable service With 10 ppm resolution and 2 FS accuracy you will have high quality results at your fingertips Automatic temperature compensation ATC adjusts for changes in total dissolved solids due to temperature anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 Features Resolution 10 ppm High accuracy 2 Full Scale Measures 0 19990 ppm Rugged waterproof housing meets IP57 standards Compact size fits easily into your pocket Automatic temperature compensation Replaceable electrodes not covered under warranty Large 21 x 18 mm LCD display Easy 1 point calibration with included calibration solution Comes ready to go with two long life 3 V Lithium batteries 2 Safety Summary Be sure the temperature and humidity are within the limits indicated in the Technical Specifications section of this manual Avoid making measurements in the presence of explosive gas combustible gas steam or excessive dust Do not install substitute parts or perform any unauthorized modifications to this instrument Return
8. sually inspect its case and parts for any damage If damage to the instrument is evident a description of the damage should be noted on the carrier s receipt and signed by the driver or carrier agent Save all shipping packaging for inspection Forward a report of any damage to the agent through which the unit 15 procured Retain the original packing in case subsequent repackaging for return is required Use of the original packing is essential After the mechanical inspection verify the contents of the shipment The items included in this package are P773 TDS meter Instruction manual Calibration solution Two 3V Batteries already installed Calibration screwdriver Gift box anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 1 2 3 4 5 6 7 6 1 6 2 Device Description Battery compartment cap Main display Power button Electrode collar Total Dissolved Solids Meter 4 Electrode module Electrode Protective cap Operating Instructions Preparation Remove the protective cap from the meter to rinse the electrode with clean water and then wipe it dry Do not touch or wipe the surface of the inner black sensor of the electrode Open the battery compartment to take out the screwdriver Press the button to turn the meter power on Calibration Dip the electrode into the calibration solution Stir gently and wait until the
9. the instrument to Anaheim Scientific for service and repair to ensure that safety features are maintained The following symbols are used in this manual This symbol on an instrument indicates that the user should refer to the operating instructions located in the manual The meter is in compliance to the CE mark standards 3 Compliance Statements Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems anaheimscientific com Technical data subject to change without notice Anaheim Scientific Corp 2012 v110912 This product is subject to Directive 2002 96 EC of the European Parliament and the Council of the European Union on waste electrical and electronic equipment WEEE and in jurisdictions adopting that Directive 1s marked as being put on the market after August 13 2005 and should not be disposed of as unsorted municipal waste Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements 4 Product Contents and Inspection This unit is tested prior to shipment It is therefore ready for immediate use upon receipt An initial physical inspection should be made to ensure that no damage has been sustained during shipment Inspect the packing box on receipt for any external damage If any external damage is evident remove the instrument and vi
Download Pdf Manuals
Related Search