user Manual
Contents
1. Press OK followed by numbers to change the date and time Time Display This menu allows to control whether the time is displayed on screen or not The options are Off On 5 3 5 Timer Setting In this menu you can set a programme timer or sleep timer Programme timer Timer Number You can set up to 8 timers Timer Mode Off Once Daily Weekly Monthly Timer Service TV Service Radio Service Wake up Channel You can select any channel as wake up channel Month Date Day Use to select the start month date and day www strong tv 2 STRONG NEN Time Press OK to input the time with the numeric buttons When you leave the programme timer a saving window appears Use 4 to select Yes in the confirmation window and press OK to save or select No to cancel Duration Press OK to input the timer duration with the numeric buttons Sleep Timer You can set the receiver to power OFF in 10 min 30min 60min 90 min and 120 min automatically 5 3 6 OSD Setting This menu allows you to change settings for Subtitle Display OSD Transparency and Load Default OSD Setting Subtitle Display To set the subtitle to Standard or OFF OSD Transparency To set the OSD transparency from Off 50 OSD Timeout To define how long the information banner is to be shown 55 105 Load Default OSD Setting To clear all OSD settings and reset to default value 5 3 7 Parental Lock This menu allows you to protect the installation menu or chan2. TV System Region and Time Timer Setting OSD Setting and Parental Lock 1 Use Y to highlight the menu of choice and press OK to proceed Select an item with AV Settings be changed with the lt P buttons To get a better overview of the possible settings press OK first Now you can select settings with Y and confirm with OK 2 Press the EXIT button to exit 5 3 1 OSD Language This menu allows you to set the OSD Language 5 3 2 Subtitles preference This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between Normal and Hard of Hearing 5 3 3 TV System This menu allows to setup different settings concerning your TV set Display Mode PAL NTSC AUTO Aspect Ratio Use this menu to configure the screen aspect Possible settings are 4 3PS Pan amp Scan 4 3LB Letter Box 16 9 Wide Screen and AUTO Video Output Use this menu to switch the video output mode between RGB and CVBS 5 3 4 Region and Time Here you can set your region and time zone Region This menu is used for changing the region setting GMT Usage This setting allows you to switch the usage of GMT time on or off The options are Off User Define By Region GMT Offset This menu is valid only when User Define is selected in GMT Usage menu The GMT offset range is 1 1 30 12 00 increasing by half hours progressively Date Time The Date and Time menus are valid only when Offis selected in GMT Usage menu
3. Use the Y buttons to move the selected channel to its new position Press OK use 4 to select Yes the confirmation window and press 4 to save 5 1 2 Radio Channel List The operation of the Radio Channel List is the same as of the TV Channel List Since there is no video information in radio mode the radio background will be displayed in the preview window on the right 5 1 3 Delete all favourites and groups Use this menu to delete all favourite channels Select Delete All Favourites with the Y buttons and press OK Use lt P to select Yes in the confirmation window and press OK to delete or select No to cancel www strong tv STRONG een 5 1 4 Delete all Use this option to delete all channels Select Delete All with Y and press OK then enter the password Default PIN 0000 In the confirmation window select Yes with lt P and press OK to delete or select No to cancel 5 1 5 Rename group In this menu you can change the name of favourite groups Use the Y buttons to select Group Rename and press OK to enter 1 Select a group with Y and press OK 2 Use the Y 4 buttons to navigate the on screen keyboard Highlighted characters can be inserted by pressing OK After entering the new group name highlight OK at the keyboard to confirm3 Press EXIT to cancel the group rename 5 2 Installation 5 2 1 Auto Scan 1 Use the Y buttons to select Installation and press OK to enter the menu 2 Use Y
4. down 4 DTV VCR No function 5 INFO Shows the actual channel information 6 VOL VOL Volume up down 7 MENU Opens the main menu In menu you will get one step back 8 EXIT Exits from the menu or sub menu 9 Menu Off Change channel to next previous Menu On Moves the cursor up down 10 lt gt Menu Off Decreases increases the volume level Menu On Change settings for specific Menus 11 OK Menu On Activates the highlighted menu item Menu Off Displays the current channel list 12 No function 13 TIMESHIFT No function 14 0 9 Channel selection or value input 15 EPG Shows the EPG Electronic Programme Guide in TV mode 16 RECALL Back to previous shown channel www strong tv STRONG mra 17 AUDIO Sets the current audio channel to left right or stereo 18 TV RADIO Toggles between TV or RADIO mode 19 FAV Favourite group selection 20 FILE No function 21 TTX Shows Teletext on OSD On Screen Display 22 SUBTITLE Shows list of subtitled languages 23 4 Rewind Fast forward of video files 24 Colouredbuttons For Teletext and other functions 3 4 Default PIN 0000 4 0 FIRST TIME INSTALLATION When using the receiver for the first time the Easy Install menu appears Use A Y to select Region OSD Language Antenna Power and Scan Mode and lt gt to select options Then use the AY buttons to move the focus to Search and press OK to proceed with the automatic channel scan 5 0 MAIN MENU In viewing mo
5. this process NEVER disconnect the receiver from the mains or switch OFF the power This can damage your receiver and will void the warranty NOTE This receiver is equipped with an over the air update function which might not be operational in your broadcast region For further details visit our website wwpw strong tv d contact your local Service line 5 5 Media Select Media and press OK to enter the Media menu 1 Press MENU to enter the main menu Select Media and press OK to enter the menu 2 Use Y to highlight the menu of choice and press OK to enter 3 Press EXIT to leave Media www strong tv 11 STRONG Use the two button rows the bottom of your remote control for player operation A help screen showing how to use the buttons will be displayed on screen 5 5 1 Media Player This function allows you to play MPEG 1 and MPEG 2 video audio and photo files from a connected USB device 1 Inthe Media menu select Media Player and press to enter the menu 2 Use Y to select an item and press OK or P to play the files 3 Press EXIT to quit 5 5 2 Safely Remove Storage Device In the Media menu select Safely Remove Storage Device and press OK to safely remove the USB device A message indicating that the device can be removed will be displayed 6 0 OPERATION We at STRONG understand that you can t wait to enjoy your new digital terrestrial receiver To turn your receiver ON or to Standby
6. use the button on the remote control or on the front panel Choose channels with the Y buttons Alternatively you can digit the channel number with the 0 9 buttons on the remote control or press OK in viewing mode to display the channel list The volume can be adjusted with the lt P buttons 6 1 Changing Channels There are 4 ways of channel selection stepping through the channel list selection by number from the on screen channel list and using the Electronic Programme Guide EPG Stepping through the channel list To move through the channel list use the Y buttons on the remote control Selection by direct channel number input Enter the channel number directly by using the numeric buttons and press the OK button to select the channel Selection by on screen channels list You can also select a channel directly from the on screen channel list To call up the channel list press OK in viewing mode Alternatively the list can be displayed using the receiver s main menu See chapter 5 1 1 TV Channel list in this manual for operation details Selection via EPG You can also select a channel directly from the Electronic Programme Guide EPG To display the EPG press EPG on the remote control See chapter 6 2 below for details 12 www strong tv PART 1 English STRONG 6 2 Accessing the Electronic Programme Guide EPG Press EPG to enter the EPG menu 5 Use the numeric button 2 to switch the highlight between
7. 4 TRONG Digital Terrestrial Receiver SRT 1189 Picture similar STRONG User Manual www strong tv ANTENNA Fig 1 FT our TV RECEIVER i RF CABLE TELEVISION STRONG Model Digital Terrestrial Dan 7 1189 En EL 3 4 Fig 4 9 5 Le a 10 719 06006 1 0006 9000 ime Km 88 120 l gt gt 21 B 21 88 HOTLINE Fe 0320 400 150 0826 029 928 support_at strong tv support_fr strong tv 0 12 Min sterr Festnetz 0 15 par mn poste fixe en France 199 404 032 IT support_it strong tv Da rete fissa 24 8 cent al min 12 5 cent scatto alla risposta en ev Da rete mobile max 49 cent al min e 15 6 cent scatto alla risposta N es support_nl strong tv 0 14 Min deutsches Festnetz 801 702 017 0 42 Min max Mobilfunknetze support_pl strong tv support_dk strong tv m 380 44 228 24 73 support_ua strong tv www strong tv Supplied by STRONG amp Co Japan Represented by STRONG Ges m b H Franz Josefs Kai 1 1010 Vienna Austria Email support_at strong tv 11 Mar 2015 15 12 11 Feb 2015 17 18 PART 1 English TABLE OF CONTENTS 1 0 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 2 0 CONNECT
8. ION 2 1 Connecting to TV and Terrestrial Antenna 2 2 Connecting to a Digital Audio Amplifier 3 0 YOUR RECEIVER 3 1 Front Panel 3 2 Rear Panel 3 3 Remote Control 3 4 Default PIN 0000 4 0 FIRST TIME INSTALLATION 5 0 MAIN MENU 5 1 Channel 5 2 Installation 5 3 Setup 5 4 Tools 5 5 Media 6 0 OPERATION 6 1 Changing Channels 6 2 Accessing the Electronic Programme Guide EPG 6 3 Accessing the favourite channels 7 0 TROUBLE SHOOTING 8 0 SPECIFICATIONS STRONG voaaoaoauuwuu UHH b POP ONN STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EC and 73 23 EC RoHS 2002 95 EC Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change All product names are trademarks or registered trademarks of their respective owners STRONG 2015 All rights reserved www strong tv STRONG N 1 0 INSTRUCTION 1 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accomp
9. anying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod or bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to the instru
10. ces caused by loss of information 2 0 CONNECTION 2 1 Connecting to TV and Terrestrial Antenna Fig 1 To receive broadcasted signals the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver 2 2 Connecting to a Digital Audio Amplifier Fig 1 4 www strong tv PART 1 English 419 TRONG Connect your Digital Audio Amplifier with the S PDIF connector on the back of the receiver 3 0 YOUR RECEIVER 3 1 Front Panel Fig 2 1 USB Connector for USB storage devices 2 IRsensor Point your remote control towards this sensor 3 Modeindicator RED indicates that the receiver is in STANDBY mode GREEN indicates that the receiver is in OPERATING mode 4 Standby On button Switch receiver ON to running mode or STANDBY mode 3 2 Rear Panel Fig 3 1 ANTIN To connect an antenna for reception of broadcasting signal Active antennas can be supported with max 5 V 50 mA DC 2 ANTOUT To connect a TV set or to connect an extra receiver 3 S PDIF Coaxial connect your receiver to digital audio amplifier 4 TVSCART To connect your receiver with your TV set using a SCART cable 5 Power cord Your receiver requires a voltage of 220 240 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet 3 3 Remote Control Fig 4 1 6 Turns the receiver On Standby 2 0 Mutes audio output of the receiver 3 PG PG Page up
11. channel list events schedule ofthe selected channel and now next events 3 Inthe event schedule press the numeric button 3 to book a timer for the highlighted event Press OK to open the Detail menu for the selected event 4 Press the numeric button 1 to open the booking list menu 6 3 Accessing the favourite channels 1 2 Use Y to select a favourite group 3 Press OK to enter the favourite channels list and use Y to select a channel 7 0 TROUBLE SHOOTING n viewing mode press FAV to enter the favourite group menu There may be various reasons for abnormal operation ofthe receiver Check the receiver according to low If the receiver does not work properly after checking it please contact yout local service line or STRONG dealer Alternatively you can send a support mail via our website open the receiver cover It may cause a dangerous situation and will void the the procedures shown bel www strong tv DO NOT warranty Active antenna requires to switch ON antenna power external power Problem Possible cause What to do LED indicator not lit Mains lead unplugged Check mains plug No signal found Aerial is disconnected Check aerial lead Aerial is damaged misaligned Check aerial Out of digital signal area Check with dealer Switch receiver s Antenna Power ON connect external power No picture or sound on TV Scrambled channel message Scart AV is not selected on your TV TV is not switc
12. ction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords 2 www strong tv PART 1 English 419 TRONG GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electric shock from contact with internal high voltage points never insert a metal object int
13. cy range 47 862 MHz Input signal level 20 82 dBm Multimedia Video playback MPEG 1 and MPEG 2 encoded mpg Audio playback MP3 and WMA Picture view JPEG and BMP STRONG cannot guarantee the playback of files although extensions are listed as it depends on codec used data bit rate and resolution all MPEG codec formats are supported Memory and System Flash memory 1MB SDRAM 8MB 14 www strong tv PART 1 English STRONG Connectors ANTIN IEC Female ANT OUT IEC Male TV SCART RGB CVBS S PDIF coaxial output USB 1 1 port max 5 V 500 mA General Data Supply voltage Power consumption Power consumption in standby Operating temperature Storage temperature Operating humidity range Size WxDxH in mm Net weight 220 240 V AC SMPS 50 60 Hz 3 13 W typ 8 W max max 0 5 W 0 40 10 50 C 10 85 RH Non condensing 138x112x40 0 315 kg www strong tv 15 STRONG En 18 www strong tv
14. de press MENU at any time to enter the Main Menu It consists of the following submenus Channel Installation Setup Tools and Media 5 1 Channel 1 Use the Y buttons to select Channel and press OK to enter 2 Use the Y buttons to highlight the item of choice and press OK to select 3 Press EXIT to exit NOTE You can also press OK in TV mode to enter the channel list 5 1 1 TV Channel list 1 Inthe Channel submenu select TV Channel List with the Y buttons and press OK to enter 2 Use the lt P buttons to change channel group assumed you have already set up favourite groups 3 With the A Y buttons select the channel you wish to watch Press OK to watch the selected channel in full screen mode 5 1 1 1 Edit Use this menu to lock skip delete or rename channels or add them to a favourite list Press the numeric button 1 to enter the Edit menu Highlight a channel with the Y buttons and press OK to select or press the numeric button 0 to select all channels Selected channels will be marked This way of selection can be executed for each of the edit functions Favor To add channel or all channels to a favourite group press the 1 button Use the Y buttons to select a group and press OK With lt P select Yes in the 6 www strong tv PART 1 English lt TRONG confirmation window and press OK to save Selected channels will be marked with a folder symbol Lock Press 2 to lock one channel or all channel
15. hed on Channel is scrambled Switch to correct TV input Switch TV on Select alternative channel No response to remote control Receiver off Remote not aimed correctly Front panel obstructed Remote batteries exhausted Plug in and turn on plug Aim remote at front panel Check for obstructions Replace remote batteries Forgotten PIN code Contact local Service Hotline or send email to our Support via www strong tv www strong tv 13 STRONG ae Problem Possible cause What to do After moving the Antenna signals are too weak Press the INFO button on remote 3x to receiver to another call up signal bars and adjust antenna room area you are no for maximum reception longer able to receive or rescan channels digital reception The receiver switches Auto Standby function enabled Disable auto standby See section 5 3 8 off automatically for details 8 0 SPECIFICATIONS Demodulator Demodulator COFDM 16 QAM 64 QAM Transmission mode 2K 8K Video Decoder Profile level MPEG2 MP ML Video resolution 720 x 576 pixels PAL 720 x 480 NTSC Decoding amp Video Out PAL amp NTSC Aspect ratio 4 3 16 9 Audio Decoder MPEG MusiCam Layer Il Sampling rate 32 44 1 48 KHz Audio mode Stereo Joint Stereo Dual Mono Mono Tuner Front End DVB T UHF amp VHF Tuner Input frequency range 174 230 MHz VHF and 470 862 MHz UHF Loop through frequen
16. icates warning information TIPS Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold characters Move to Represents a menu item within a window Italic characters 1 4 Accessories m 1 user manual m 1 remote control m 2x batteries AAA type NOTE The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices m Itis recommended to use USB 1 1 or 2 0 storage devices If your device is not compatible to USB 1 1 or 2 0 specifications playback and other multimedia functions of the receiver would not work properly STRONG cannot guarantee compatibility with all types of USB storage devices m Ifyou are going to use external USB HDD Hard Disk Drive please consider that the power specifications might exceed the supported output of your receiver 5 V 500 mA If so please connect your USB HDD to an according external power adapter m Itis advised not to store important information on USB storage devices used with the receiver Always make backups of data on USB storage device before usage with receiver STRONG will not take responsibility for any loss of information or circumstan
17. ion of servicing or repairs ask the service technicians to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could damage the product and void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully www strong tv 3 STRONG eee m Refer to the user manual of your TV and your antenna m Make sure that the SCART cable and outdoor components of the antenna are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The symbols serve as follows WARNING Ind
18. nels with a password You can also change the password here When entering the menu you will be asked to input the password Default PIN 0000 Menu Lock Locks the channel scan installation menus You can set the menu lock to ON OFF Channel Lock Off Manual Age 4 Age 18 New Password Input your new password here to change the password Confirm Password Input your new password again to confirm the new password 5 3 8 Auto Standby This option allows you to enable or disable Auto Standby The default setting for Auto Standby is ON The receiver will switch to standby automatically when it doesn t receive commands from the remote control for three hours To avoid the automatic switch off set Auto Standby to OFF 5 4 Tools Press MENU to enter the Main Menu Select Tools with the Y buttons and press OK to enter 1 Use to highlight the menu of choice and press OK to enter 2 Press EXIT to leave 5 4 1 Receiver Information This menu displays relevant receiver information like the receiver model software version signature and our website www strong tv 1 Inthe Tools menu select Receiver Information and press OK to open receiver information 2 Press EXIT to leave 10 www strong tv PART 1 English lt TRONG 5 4 2 Game This menu allows you to play games Tetris Snake and Othello on this receiver 1 Select Game in the Tools menu and press OK to enter the game menu 2 Use Y to select a game and pres
19. o the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions ad improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required make sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electric shock or create other hazards Safety Check Upon complet
20. s Use to select Yes in the confirmation window and press OK to save The selected channel s will be marked with the 8 symbol Skip Press to skip one channel or all channels Use 4 to select Yes in the confirmation window and press OK to save Selected channel s will be marked with the symbol and will be skipped during channel zapping in full screen mode Delete Press 4 to delete one channel or all channels Use 4 to select Yes in the confirmation window and press OK to save Rename To rename a channel press the button 5 When all changes are made press EXIT to leave the menu 5 1 1 2 Find Press the button 2 to enter the Find menu Use the A Y lt B gt buttons to highlight letters or numbers and press OK to insert After each character the channel list will search the channel according to your input and list the matching channel Press EXIT to quit the Find mode 5 1 1 3 Sort Press the button 3 to enter the Sort menu Use the A Y buttons to highlight the sorting option of your choice and press OK to confirm Default Sorting by searching order from lowest to highest frequency Name A Z o Sorting in alphabetical order Name Z A Sorting in alphabetical order FTA Free To Air channels will be first in the list Lock Unlocked channels will be listed first followed by all locked channels 5 1 1 4 Move Press the button 4 to activate the Move function The selected channel will be marked with the N symbol
21. s OK to enter the game Highlight Start and press OK to start the game For changing levels highlight Setup and use the lt gt buttons 3 Press EXIT to quit the game NOTE You can also press OK to pause playing 5 4 3 Load Factory Default This option allows you to reset the receiver to factory settings which clears all stored channels and settings WARNING This option will permanently delete all your settings and channel lists and set your receiver to factory default Please use with caution 1 Enter the Tools menu select Load Factory Default and press the OK button You are asked to input your password 2 Input the correct password using the numeric buttons Default PIN 0000 A confirmation window will be displayed 3 Select Yes to return back to the factory settings and clear all channels Select No to cancel 4 Press the EXIT button to exit 5 4 4 Software Upgrade 1 Enter the Tools menu select Software Upgrade and press the OK button The Software Upgrade menu is shown 2 Use Y to select Upgrade by Storage and press OK You are asked to input a password 3 Input the correct password Default PIN 0000 The Software Upgrade submenu will be opened Then select the correct software file and press OK to start A message will be displayed to confirm the update process Select Yes to confirm or No to cancel 4 Press the EXIT button to leave WARNING After an update the receiver restarts automatically During
22. to select Auto Scan and press OK to enter the menu 3 Change the Scan mode with lt P Use Y to highlight Search and press OK to start auto scan 5 2 2 Channel Scan 1 Use the Y buttons to select Installation and press OK to enter the menu 2 Select Channel Scan with Y and press OK to enter 3 Use the lt P buttons to select scan mode By Channel or By Frequency 4 When By Channel is selected use the cursor buttons to select Scan Band and Channel No When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth Set Network Search to ON or OFF highlight Search and press OK to start scanning Found channels will be stored and the receiver will switch to the first channel in the list 5 2 3 Antenna Setting 1 Press MENU to enter the main menu 2 Use the Y buttons to select Installation and press OK to enter the menu 3 Select Antenna Setting with Y and press OK to enter 4 Use the lt P buttons to change the setting If On is selected the receiver will provide 5 V antenna power for active antennas 5 Press EXIT button to exit 5 2 4 LCN Mode If LCN Logical Channel Numbering is activated and LCN signal is provided by the operator channels will be stored in the operator defined order You can activate deactivate the LCN function by setting the LCN Mode to ON or OFF 8 www strong tv PART 1 English lt TRONG 5 3 Setup This menu allows you to set OSD Language Subtitles preference
Download Pdf Manuals
Related Search