Contents: - Sears PartsDirect
Contents
1. Contents 1 Important Information see 2 2 General Information ud Y GR Dd rd ede 3 3 Safety Precautions aS 4 4 SENNA 5 5 ACTESSOMES sure PER RAE FYR YN RF FER e 6 6 OSD Functions ne GG Led Gi Y gd dd Y O 7 7 Peripheral Equipment Connecting cccccoccnccocnnccccnncinonononos 19 8 Remote A 25 9 Quick Guide for Color AUSTEN arne 27 10 Cleaning And Maintenance Handy Tips coocccccccccccncnnncno 29 11 EO SH TU 30 PAGE 1 WARNING WARNING N A WARNING SHOCK DANGEROUS _ DO NOT OPEN REAR COVER This is a Class A and Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE 1 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons 2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance 3 It is strongly advised NOT to freeze the image or to show still image on the PDP for a long duration of time This might caus2. 2 Use the Left or Right key to change the Video Standard Note It is advised to set the Video Standard in Auto so the system will automatically search for the video Standard PAGE 13 Audio DPMS 1 2 Under the function of Utility please select DPMS Use the Left or Right key to switch the DPMS On Off Note This function is designed to save electricity consumption When it is switched to ON the system automatically sets to standby mode when receiving no input signal os 1 2 D H Position Under the function of Utility please select OSD H Position Use the Left or Right key to adjust the OSD Horizontal Position D V Position Under the function of Utility please select OSD V Position Use the Left or Right key to adjust the OSD Vertical Position D TimeOut Under the function of Utility please select OSD TimeOut Use the Left or Right key to adjust the OSD TimeOut Picture Scrolling Under the function of Utility please select Picture Scrolling Use the Left or Right key to turn the Picture Scrolling ON or OFF Note This function is designed to avoid burn in image when showing still mage for long duration of time When switched ON picture on the screen will shift randomly from time to time p s This function only work
3. Menu PIP Function Selection Zoom Function Selection Audio Off Swap Main PIP sources Numerical key 0 Numerical key 1 or PIP at the top of left hand side Numerical key 2 or PIP at the top of the middle Numerical key 3 or PIP at the top of right hand side Numerical key 4 or PIP at the left hand side Numerical key 5 or PIP in the middle of center Numerical key 6 or PIP at the right hand side Numerical key 7 or PIP at the bottom of left hand side Numerical key 8 or PIP at the bottom of middle Numerical key 9 or PIP at the bottom of right hand side Select Channel Start from 100 digit Retrieve previous selected channel Brightness Adjustment Contrast Ratio Adjustment increase Volume Decrease Volume Channel Selection Up Channel Selection Down System Info Display image Freeze Enter Return OSD Menu Freeze PAGE 26 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Up Right Left Down Enter Source Select White S Video RGB DVI Com 1 Video Com 2 Scal MTS V Chip
4. Monitor monitor s A V input or to the Component Input for better picture guality Turn on the Monitor and go into the Source Select Function Then please select the source input used by your game system Can I hook up my Stereo System to the Yes please connect your stereo system s Audio Output to any of Monitor the Monitor s Audio input Please remember to switch the Video input in according to the Audio Input Can I mount PDP4249G on the wall Yes thePDP4249G is also designed to be mounted on the wall However you will need to purchase the WallMount Kit from our local dealer Can I watch 4 3 screen on PDP4249G Yes please go into the Video Scaling function in the OSD to select the 4 3 aspect ratio image However it is strongly adviced to set the screen in 16 9 aspect ratio Can I hook up any kind of speakers to Yes there is amplifier built in the PDP4249G However amplifier PDP4249G built in the PDP4249G is only compatible with 10W For better Audio performance it is recommanded to have speakerswith built in amplifier Do I need a Tuner if I have Satellite No the Set Top Box provided by the Satellite broadcasting Does one of the PIP source has to be VGA or No PDP4249G is equipped with Dual Tuner and the PIP function Does PDP4249G have built in Tuner or does PDP4249G does have built in Dual Tuner I a Does PDP4249G have closed caption Yes PDP4249G does have Closed Caption Does PDP4249G have at
5. TEXT2 TEXT 3 and TEXT 4 Note This function is only available when the Video Input source is from Cable TV or AV PIP Source 1 Under the function of Function please select PIP Source 2 Use the Left or Right key to change the PIP Source PIP Size 1 Under the function of Function please select PIP Size 2 Use the Left or Right key to adjust the PIP Size Note PIP Size is available in four sizes and OFF When it is set to OFF the PIP H Position and the PIP V Position will not appear for adjustment PIP H Position 1 Under the function of Function please select PIP H Position 2 Usethe Left or Right key to adjust the PIP H Position PIP V Position 1 Under the function of Function please select PIP V Position 2 Use the Left or Right key to adjust the PIP V Position To access the function of Utility press Menu and select Utility Pee Language _ Advanced _ Video Standard Souree DPMS Function OSD H Position EA Utility OSD V Position Mera Ado _ OSD TimeQut KOM o WW o _ Picture Scrolling Information Load Factory Language 1 Under the function of Utility please select Language 2 Use Left and Right key to change the Language Video Standard 1 Under the function of Utility please select Video Standard
6. 1 Under the function of Picture please select Sharpness 2 Use the Left or Right key to adjust the Sharpness PAGE 9 Freguency 1 Under the function of Picture please select Frequency 2 Usethe Left or Right key to adjust the Frequency Note It is strongly advised to set the Frequency level as it is when coming out of the factory inappropriate setting of Frequency may cause the pictures to have uneven lines or noise Phase 1 Under the function of Picture please select Phase 2 Use the Left or Right key to adjust the Phase Note It is strongly advised to set the Frequency level as it is when coming out of the factory inappropriate setting of Frequency may cause the pictures to have uneven lines or noise Auto Image 1 Under the function of Picture please select Auto Image 2 When Auto Image is selected H Position V Position Frequency and Phase Picture IN DVI MODE To access the function of Picture IN DVI Mode press Menu and select Picture Picture Brightness TC O Advanced Contrast Source Auto Image Ms o Audio TY Wn Brightness 1 Under the function of Picture please select Brightness 2 Use the Left or Right key to adjust the Brightness Note The higher the value of Brightness the brighter the pict
7. 10 higher For example if the Brightness is with value of 50 then the contrast Ratio should be with value of 60 This method will make the picture with sharper and more clear image STEP 2 Sharpness The higher of the sharpenss the more clear the image will show Please note that if the video signal input is with lower resolution tuning the sharpness too high may cause the objects in the picture with uneven edge It is recommended to set the Sharpness level in the middle and adjust it according to the resolution capability of the video signal input STEP 3 Color For picture with fuller color please tune the color level higher The image will become Black and White when the value of Color is too low Recommended to set the Color level in the middle and adjust it according to your preference PAGE 27 STEP 4 Tint Tint value has the major effect on picture s color displays When the value of Tint is too much the picture will become Greenish When the value of Tint is too less the picture will become Redish and then Purplish Recommended to se the Tint value as the factory default value STEP 5 Gamma Gamma is availabe in five levels Factory default value is in level 1 However you can change its level according to your preference STEP 6 Color Temp Cold Temperature Normal Temperature and Warm Temperature are availabe to choose When it is set to Cold Temp the picture will be more
8. AD OO 00 O E Q S video Line 7 Recommended Connecting Method S VIDEO INPUT For more colorful image connection AV1 AV Input For a fair image connection SetTop Box Connecting For Satellite Direct TV SetTop Box e AV Line av dll He GOL a Component Li Line i Oo BO th 7 COMPONENT gt i S Video Line RGB Line Recommended Connecting Method Please note that your Set Top Box might not have all the connectors availabe as the picture provided above Recommended connecting method in the order of resolution performance is as follows RGB Connection gt Component Connection gt S Video Connection gt AV Connection PAGE 22 DigiCamera V8 Game system Connecting Camera Game System O 000 a 900 COMPONENT Recommended Connecting Method S VIDEO INPUT For more colorful image connection Resolution and Sharpness performance might not be as good as Component Input YPbPr connection AV 1 AV Input For a fair image connection PC Connecting ANT CABLE IN Fr E Das VGA Line DVI Line Please Note that DVI and VGA inputs can only be used one at a time PAGE 23 ANT Cable TV Connecting ANT CABLE N TV Cable Line RS 232 IN O ANT CABLE OUT ooo 6 Q DVI D IN
9. ANALOG VGA IN BHF 23 29000 Wall Side Ile asian a nio 90090 AUDIO OUTPUT For external speakers Audio Input connection AUDIO INPUT COM2 For COM2 source Audio Output connection COM 1 For COM1 source Audio Output connection S V DV For S Video or DVisource Audio Output connection AV ro For AV source Audio Output connection AUDIO _ AUDIO IN For other peripheral Audio Input Connections Pa o ES 2s EXI PAGE 24 Contrast Freeze 32 35 oe 34 37 36 PAGE 25 ADA 10 11 12 13 14 15 16 17 18 19 20 Power TV PIP Position Power ON OFF TV Signal Input PIP Position Adjustment Use numerical keys to change PIP Position Zoom Position Zoom Position Adjustment Use numerical keys to change Zoom Position PIP Zoom Mute Swap 100 Recall Brightness Contrast Volume Volume Channel Up Channel Down Displays Freeze
10. function of V Chip please select Set Level Note You will be asked to enter a four digit password upon selecting the Set Level 3 After the correct password is entered PW Succeed will appear and now you can access the V Chip Function 4 Use Up or Down key to switch the V Chip Levels 5 Use Left or Right key to choose the mode in each level Several modes are availabe in each level Please see the above List for reference For more detailed information of the above levels please see the following explanation provided 6 For more detailed information of MPAA levels please see the following explanation provided PAGE 16 TV Levels Guide TV PG This program may find unsuitable for younger children Many parents may want to watch it with their younger children The program conta ns one or more of the following moderate violence V some sexua situations S infreguent coarse language L or some suggestive dialogue D TV 14 This program would find unsuitable for children under 14 years of age Parents are strongly urged to exercise greater care in monitoring this program This program contains one or more of the following intense violence V intense sexual situations S strong coarse language L or intensely suggestive dialogue D TV MA This program is specifically designed to be viewed by adults and therefore may be unsuitable for childre under 17 This pr
11. in Blue Green color series When it is set to Warm Temp the picture will be more in Yellow Orange color series The Color Temp is set to User user can adjust the color of Red Green and Blue as the custom Color Temp according to his her preference STEP 7 Color Management The Red Green and Blue color agents can be adjusted seperately under Color Management Please note that the changes made in each color agents may not have major effects on picture s color displays They are only for minor change of color displays PAGE 28 In the event of problmes with the display check the following explanations before contacting your dealer for servicing Problem Action Power does not turn ON Check whether the power plug is securely inserted into the receptacle No pictures are displayed Check cables for disconnection Check whether the power for all input eguipment in ON Check for connection to wrong terminals or for wrong input mode Remote control does not function properly Check for incorrect battery orientation Check for dead batteries Check for distance from the display Check whether you are pointing the remote control transmitter properly at the display receiver Check for any obstacle between the remote control and display The display makes a snapping sound This sound is produced when the cabinet expands or contract due to variations in temperature This sou
12. on set with LG Panel Load Factory When Load Factory is selected all values of the functions in the Utility automatically resume to the Factory default setting To access the function of Audio press Menu and select Audio _ Picture Volume Ea A Advanced Treble LA Bass BBE Level Information PAGE 14 TV Volume 1 Under the function of Audio please select Volume 2 Use the Left or Right key to adjust the Volume 3 Volume can be adjusted directly from the remote controller using and Treble 1 Under the function of Audio please select Treble 2 Use the Left or Right key to adjust the Treble Level Bass 1 Under the function of Audio please select Bass 2 Use the Left or Right key to adjust the Bass Level BBE Level 1 Under the function of Audio please select BBE Level 2 Use the Left or Right key to change the BBE Level Note BBE Level is available in 4 types ByPass Level 1 Level 2 Level 3 and Level 4 SRS 1 Under the function of Audio please select SRS 2 Use the Left or Right key to turn the SRS ON or OFF To access the function of TV press Menu and select TV Please note that this function is only available when the Video Input Source is from TV Tuner Picture Tuner Select Advanced Channel Sot MTS
13. please select Brightness 2 Use the Left or Right key to adjust the Brightness Note The higher the value of Brightness the brighter the picture will be However inappropriate setting of brightness may cause pictures to have whitish images Contrast 1 Under the function of Picture please select Contrast 2 Use the Left or Right key to adjust the Contrast Ratio Note Contrast ratio may have certain effects on brightness The higher the value of Contras the higher Black White level the pictures will show Sharpness 1 Under the function of Picture please select Sharpness 2 Use the Left or Right key to adjust the Sharpness PAGE 7 Picture Color 1 Under the function of Picture please select Color 2 Use the Left or Right key to adjust the Color Note Higher value of Color adjustment enable the picture to have fuller color Tint 1 2 Under the function of Picture please select Tint Use the Left or Right key to adjust the Tint Note The higher the value of Tint the more Greenish Bluish the image will display The less the value of Tint the more Redish the image will display IN Component YPbPr MODE To access the function of Picture IN Component YPbPr Mode press Menu and select Picture Picture H Position mc NU Advanced V Position CC
14. 1 S V DVI AV 100V 240V Power ON OFF Audio Output for Speakers Connection Audio Input connection for Component 2 source Audio Output Audio Input connection for Component 1 source Audio Output Audio Input connection for S Video or DVI source Audio Output Audio Input connection forAV source Audio Output PAGE 19 Connectors Power Switch AC INPUT 100V 240V 50Hz 80Hz RS 292 IN AUDIO AUDIO IN OUT DVEDIN COMPONENT L 2 3 ANT CABLE IN DVI D IN ANALOG VGA INPUT RS 232 IN 4 Component 1 Component 2 S V AV Note When connecting the the Video Input For example Input at AUDIO IN s COM 1 Note This model does not s Video Input connection for Antenna Cable TV Digital Signal Input connection for personal compute Analog VGA Signal Input connection for personal compute RS 232 Cable input connection It is used to upload or update the software It is strongly suggested NOT to proceed with any uploading updating without proper instructions Video Input connection for Component 1 Video input connection for Component 2 Video Input connection for S Video Video Input connection for AV Video Input from a source please make sure the Audio Input is coherent as if the Video Input is coming from
15. Clean the machine with a slightly damp soft cloth Do not use spray detergent and abrasive solvent It can damage the machine s screen coating layer Place the machine on a solid base to avoid dropping or danger For good ventilation of the machine please do not place the machine on surfaces such as bed sofa or rug Before operating the machine make sure that the operating voltage of your machine is identical with that of your local power supply If there is any guestion please contact with sales dealer Use only the accessory power cord designed for this product to prevent shock Do not put anything under the power cord to avoid tramping If using the same power source with other eguipments please make sure the total current does not exceed 15A Never attempt to repair a defection of the machine by yourself Always consult a skilled machine service personnel When the following situations occur please contact the gualified engineer A The power cord or the power socket has damaged If any liguid or solid object fall into the machine through the ventilation holes Exposing the machine to rain or excessive moisture The function does not follow the user manual The function of machine has clear changes maoow No further notice will be provided if the specification or design subjects have been changed Release the battery of remote controller after long time replacement over 1 month and avoid making destruction
16. Component 1 please connect the Audio upport VGA Audio Input when connecting to personal computer However DVI Audio Input is availabe and is shared with S Video Audio Input PAGE 20 AC Power Connectin 100V 240V AC INPUT POWER PLUG 100V 240V 50Hz 60Hz NG ON OFF DVD Player Connectin DVD player AV Cable Line i Q E SN EN A y A A AS O fF amp F COMPONENT j ME Component Line Recommended Connecting Method Component input YPbPr For more vivid and higher resolution image connection This connecting method is recommended when your DVD Player has Progressive Scan function signal output with 480p If your DVD Player does not have Progressive Scan function the signal output will then be 480i and is connected here as Component input YCbCr S VIDEO INPUT For more colorful image connection Resolution and Sharpness performance might not be as good as Component Input YPbPr connection AV1 AV Input For a fair mage connection PAGE 21 VCR Connecting Video Digitizer VCR AV Line E o arte di COMPONENT VCR Video Digitizer Decode and change the noncomputer images eg images displayed from VCR TV or video discs to images in computer format gt e
17. FUnctiol Channel Scan lt Press ENTER gt Utility Aude mv Tuner Select 1 Under the function of TV please select Tuner Select 2 Use the Left or Right key to switch the Tuner Select between Air or CATV Channel 1 Under the function of TV please select Channel 2 Use the Left or Right key to add channel or to erase channel PAGE 15 MTS 1 Under the function of TV please select MTS 2 Use and key to switch the MTS between Stereo Mono or SAP Channel Scan 1 Under the function of TV please select Channel Scan 2 Use ENTER key to activate Channel Scan and the system will search all channels and store them in the memory V CHIP Please note that the V Chip function will not be displayed in the OSD Functions To access the V Chip function please press the hot key on the remote controller Set Level CALNE Press New Password ALL NONE S L D Vs VL YD SL SO LD VSL SD Vip sip sio ALL NONE V S L D VS VL VD SL SD LD VSL VED VID SID VsLD ALL NONE V S L LD 8L 9D LD VSL VSD VLD SLD velo tS MPAA NR MPAA G MPAA PG MPAA PG 13 MPAA R MPAANC 17 MPAA X Set Level 1 Please press the function of V Chip on your remote controller 2 Under the
18. GG Select Up Select Right Select Left Select Down Enter selected items Select Video Input Source Activate White Pattern S Video Video Input Select RGB Video Input Select DVi Video Input Select Component 1 Video Input Select Video AV Video Input Select Component 2 Video Input Select Picture Scaling Function selection MTS Function Selection V Chip Function Selection Closed Captioin Selection Important Information Before proceeding to color adjustment please read the following notes carefully This guick guide is for user who has his her own preference in color adjustment setting 1 Each and every set of PDP has been carefully tested and tuned to its optimal color displayed level before leaving the factory 2 The value for these optimal color displayed levels are stored in the set They can be restored by selecting Load Factory under the function of Utility in the OSD Menu 3 Picture s displaying color guality will vary under different video signal input This is due to different resolution capability each video signal input carries STEP 1 Brightness Contrast When the picture is too bright or with too much reflections on the objects surface it may cause the picture to have whitish and unclear image When this happens try adjusting Brightness Contrast Value It is recommended to tune the value of Contrast Ratio a little higher than the Brightness with value of
19. Source Brightness ll _ Function Contrast A ty Sharpness E Color EIN v Tint E Information o H Position 1 Under the function of Picture please select H Position 2 Usethe Left or Right Key to adjust the Horizontal Position V Position 1 Under the function of Picture please select V Position 2 Use the Left or Right key to adjust the Vertical Position Brightness 1 Under the function of Picture please select Brightness 2 Use the Left or Right key to adjust the Brightness Note The higher the value of Brightness the brighter the picture will be However inappropriate setting of brightness may cause pictures to have whitish images Contrast 1 2 Under the function of Picture please select Contrast Use the Left or Right key to adjust the Contrast Ratio Note Contrast ratio may have certain effects on brightness The higher the value of Contrast the higher Black White level the pictures will show Sharpness 1 2 Under the function of Picture please select Sharpness Use the Left or Right Key to adjust the Sharpness PAGE 8 Picture Color 1 Under the function of Picture please select Color 2 Use the Left or Right key to adjust the Color Note Higher value of Color adjustment enable the picture to have fuller color Tint 1 Under the function of P
20. at supports up to 480p resolution capability is categorized as SDTV Display Panel that supports under 480p is categorized as DTV This specific model support up to 1080i resolution capability PAGE 5 nn ON REMOTE CONTROLLER AAA Battery x 2 Pcs POWER CORD TABLE STAND S VIDEO CORD Items 1 amp 2 Item 3 Item 4 WallMount Kit Non Adjustable Optional item for purchase PAGE 6 Functions Picture To start the OSD Functions on your screen please press the Menu key now On the Remote Controller Use the Up or Down key to select OSD and SUB OSD Functions Press the ENTER key to access the SUB OSD from the Main OSD Use the Left or Right key to adjust value in each function On the Key Pad of the Monitor Use the Select y key to select OSD and SUB OSD Functions Press the ENTER key to access the SUB OSD from the Main OSD Use am Volume 4 key to adjust value in each function Please Press the Menu key again to exit the OSD Menu or to go back to the prevoius page IN AV S Video Component YCbCr 8 TV MODE To access the function of Picture IN AV S Video Component YCbCr amp TV MODE press Menu and select Picture Picture Brightness KC Advanced Contrast EO Source Sharpness Function Color CA Jtiity Tint TV Information Brightness 1 Under the function of Picture
21. e in the Source For example if source is connected with component 1 input please select Component 1 here in the Source Function To access the function of Function press Menu and select Function Scaling Advanced Zoom Source White Pattern Function Closed Caption PIP Source PIP Size PIP H Position EE PIP V Position fed Scaling 1 Under the function of Function please select Scaling 2 Use Left or Right key to adjust the Scaling Note There four sizes available in Scaling Choose Normanl Pan Scan Wide Screen and 4 3 according to your preference Zoom 1 Under the function of Function please select Zoom 2 Use the Left or Right key to adjust the Zoom In Out Level Note Zoom in level is available from 10096 to 40090 White Pattern 1 Under the function of Function please select White Pattern 2 Use the Left or Right key to turn On Off the White Pattern Note This function is design to fix the burn in image caused by displaying one still picture for too long Simply switch the White Pattern ON for a few minute PAGE 12 Utility Closed Caption 1 Under the function of Function please select Closed Caption 2 Use the Left or Right key to change the Closed Caption type Closed Caption includes the following 8 types CC1 CC2 CC3 CC4 TEXT 1
22. e the screen to have burn in image Use White Pattern under Function Function to fix the burn in problem if it does happen 4 Allthe Glass accessories used in this product have been specially enhanced in its hardness and duration However when the following situations occur these glass might break or be damaged a When the glass is hit with hard objects with great forces b Falling or hard contact during transportation and moving c Improper installation of the glass might scratch the surface of the glass PAGE 2 IMPORTANT When the set is switched on do not shift or move the set around Sometimes it may develop unevenness in color in some parts of the screen This can be eliminated by switching off the the main power switch rear side of the set and wait for 10 minutes before switching on again If the situation remains call for service ERONT VIEW Channel UP Enter Channel Down Menu Volume Power Volume REAR VIEW Power Switch AG INPUT POWER 190V 240V PE 7 po ET ON OFF Connectors 2 ANALOG VGA IN i f COM COM SOVI AV L R COMPONENT AUDIO IN OUT PAGE 3 Please read the following directions carefully before using the machine Please keep the manual well and retain for future reference 10 11
23. gas plasma which is used to activate each cell s colored phosphor If you use a 1080i signal you can get 852 H x 480 V lines of Resolution For DVD Player Component Y Pb Pr connection is the best For Cable TV S video connection is the best and the alternate one is Composite Video AV connection Currently there are two kinds of DVD Players in the market Pro gressive Scan whichis also known as 480P and Interlace Scan which is also known as 480i Progressive Scan DVD Player 480P will only work with TVs that can accept a Progressive signal is in cludes all HDTVs and DTVs However since all DVD Players that support 480P can also support 480i you can still use the Progres sive Scan DVD Player with any TVs You just will not be able to take advantage of the 480P quality on a TV that cannot handle 480P signal So if you have a regular Analog TV and want to buy a Progressive Scan DVD Player you will only be able to watch 480i quality pictures it s 1210 W x 640 H x 130 D mm and 1210 W x 701 H x 210 D mm w Table Stand The lamp life is 30 000 hours lit on continuously without shutting down This is the lab test result After 30 000 hours the color will only start fading If the average TV watching time is 8hrs day color will start fading after 10 years PAGE 32
24. he Middle East it consists of 625 horizontal lines at a field rate of 50 fields per second Only 576 of these lines are used for picture The rest are used for sync or extra information suchas VITC and Closed Captioning PAGE 31 Guestions What does RGB mean This is an abbreviation code which stnads for RED GREEN and BLUE This is a technician test screen used at the factory or when being serviced In the event this appears on your screen unplug the television for 24 hourrs What does STD mean STD Standard Cable TV most widely used Cable TV Signal What is 3 2 pulldown This is the technigue used to convert 24 frames per second film to 30 frames per second video Every other film frame is held for 3 video fields resulting in a seguence of 3 fields 2 fields 3 fields 2 fields and etc What is PDP4249G s PoweConsumption It is 280W What is PDP4249Gs Power Supply It is AC 110V 240V What is PDP4249G s Resolution Capabilities What is Plasma What is the best resolutioin I can get on my PDP4249G What is the best video connection to use on What is the best video connection to use on What is the difference between Progressive Scan video and Interlace video What is the dimension of PDP4249G What is the lamp life of PDP4249G VGA SVGA XGA SXGA UXGA DTV HDTV 480i 480p 1080 720p Plasma is a type of Video Display that employs an enormous array of tiny cells of ionized
25. icture please select Tint 2 Use the Left or Right key to adjust the Tint Note The higher the value of Tint the more Greenish Bluish the image will display The less the value of Tint the more Redish the image will display IN Analog RGB MODE To access the function of Picture IN Analog RGB Mode press Menu and select Picture Picture H Position Advanced V Position Source Brightness Funetion gt Contrast Util a Sharpness Frequency Phase Auto Image H Position 1 Under the function of Picture please select H Position 2 Use the Left or Right key to adjust the Horizontal Position V Position 1 Under the function of Picture please select V Position 2 Use the Left or Right key to adjust the Vertical Position Brightness 1 Under the function of Picture please select Brightness 2 Use the Left or Right key to adjust the Brightness Note The higher the value of Brightness the brighter the picture will be However inappropriate setting of brightness may cause pictures to have whitish images Contrast 1 Under the function of Picture please select Contrast 2 Use the Left or Right key to adjust the Contrast Ratio Note Contrast ratio may have certain effects on brightness The higher the value of Contrast the higher Black White level the pictures will show Sharpness
26. ignal Video Signal The main OSD Menu will not appear on my Please check if the remote controller s run out of batteries Try open screen even when I press the Menu key the menu by using the KeyPad on the front monitor If the Menu is on the remote controller What is wrong still not showing service may be reguired What are the Pb Pr and Y connections for These are the component video jack they can provide slightly better picture guality than the other video inputs What does CATV mean CATV means Cable TV What does HRC means HRC Harmonic Related Carrier This is a certain band of cable that your cable company offers If your first broadcast channel starts on channel 1 then your cable company offers HRC If it starts on chan nel 2 then it is STD which stands for Standard Cable What does IRC mean IRC Incremental Related Carrier It is one of several signal formats determined by your cable TV company What does NTSC stand for NTSC National Television Systems Committee This is the name of the television and video standard in the United States It consists of 525 horizontal lines at a field rate of 60 fields per second Only 486 of these lines are used for picture The rest are used for sync and extra information such as VITC and Closed Captioning This is the color video standard What does PAL stand for PAL Phase Alternate Line It is the television and video standard in use in most of Europe Hong Kong and t
27. ld Temp NormalTemp Warm Temp and User When the User mode is activated the following three custom colors CT Red CT Green and CT Blue will appear and can be used to adjust the color CT Red 1 Under the function of Advanced please select CT Red 2 Use the Left or Right key to adjust the CT Red Level CT Green 1 Under the function of Advanced please select C T Green 2 Use the Left or Right key to adjust the CT Green level CT Blue 1 Under the function of Advanced please select CT Blue 2 Use the Left or Right key to adjust the CT Blue Color Management Under the function of Advanced select Color Management to display ICC Red ICC Green and ICC Blue ICC Red Use the Left or Right key to adjust the ICC Red level ICC Green Use the Left or Right key to adjust the ICC Green level ICC Blue Use the Left or Right key to adjust the ICC Blue level PAGE 11 Source Function 1 To access the function of Source press Menu and select Source Picture Analog RGB Advanced DVI Input Component 1 Component 2 S Video Video TV Tuner Under the function of Source use the Up or Down Key to change Input Source Note Please make sure that the input source connected on the back of the PDP is the same as selected her
28. nd does not indicated that the display has problem The display makes a buzzing sound The display has fans to maintain the temperature of internal components at a constant level This sound is produced by the fan as rotates There are spots on the screen Check whether your AV eguipment is affected by interference from automobiles trains high voltage transmission lines neon signs or other potential sources of interference Degraded color tints Check Whether all picture adjustment have been properly made Improper screen position size Check whether screen position and size have been properly adjusted if out of range appears the display is Input proper signals Make sure that the vertical freguency of the input signal receving a signal whose picture or signal is 85 Hz or less for SVGA 75 Hz or less for XVGA SXGA 60 Hz or less for cannot be reproduced by the display UXGA The screen turns to black and white Input proper signals Make sure that the vertical freguency of the input signal is 85 Hz or less for SVGA 75 Hz or less for XVGA SXGA 60 Hz or less for UXGA PAGE 29 For guick reference guide of the product please check the following FAOs Any duick way to switch the video source Yes the video source can be switched simply by pressing the urce short cut key on the remote controller Can I hook up my game system to this Yes please connect the game system s video output to the
29. of remote controller by liquid PAGE 4 Model Name 42 inch Plasma Monitor Model Number PDP4249G Display Ratio 16 9 Aspect Native Display Pixels 852 H x 480 V Pixel Characteristics Displays Sub pixels 2596 H x 480 V Pixel Pixel Pitch 1 08 H x 1 08 V mm Sub pixel Pitch 0 36 H x 1 08 V mm Horizontal Freguency 30kHz to 80KHz Vertical Freguency 50Hz to 85Hz Resolution Capabilities VGA SVGA XGA SXGA UVGA UXGA DTV 480i 480p 720p 1080 Supporting system Input PAL PAL M PAL N NTSC NTSC4 43 SECAM Brightness 700cd m Module only Contrast Ratio 2000 1 No ambient Light Viewing Angle Over 160 degrees horizontally and vertically Colors 16 77million General Weight 48kg Dimension 1210 W x 640 H x 130 D mm 1210 W x 701 H x 210 D mm w Stand Power Supply AC110V 240V Frequency 50Hz 60Hz Power Consumption lt 280 W Signal Input S Video Input Din 4 pin x 1 Composite Input BRCA X 1 Component input YPbPr X 3 or YCbCr x 3 RCA Typ DVI Input DVI Analog VGA Input D Sub 15 pin X 1 Audio Input RCA pin type R L X4 Signal Output Audio Output RCA pin L R x 1 Sound Output External Speakers Connectable Specifications are subject to change without notice HDTV READY Display Panel that supports up to 720p resolution capability is categorized as Hi Definition TV HDTV Display Panel th
30. ogram contains one or more of the following graphic violence V explicit sexual activit S or crude indecent language L MPAA Guide Grade Explanation G General Audience All ages admitted Parental Guidance Suggested Some material may not be suitable for children Parents Strongly Cautioned Some material may be inappropriate for children under 13 Restricted Under 17 reguires accompanying parent or adult guardian age varies in some locations No One 17 and Under Admitted It is changed to NC 17 now Press New Password 1 2 3 4 Please press the function of V Chip on your remote controller Under the function of V Chip please select Press New Password Enter a four digit password Check and re enter the new password PAGE 17 Information To access the function of Information press Menu and select Information Main Source PIP Source Mute Information Under the function of Information statue of Main Source PIP Source and Mute are displayed for reference PAGE 18 Connectors Power Switch AG INPUT POWER 100v 240v HE 1 1 ol 50H2 60Hz AUDIO AUDIO IN aur ANTICABLE IN DVED IN AC IN AC Power Inpu POWER SWITCH 2 AUDIO OUT AUDIO IN Com2 Com
31. tachable Speakers Yes it does have attachable speakers You might need to purchase the speakers from your local dealer How can I activate the PIP Function Simply press the PIP shortcut key on the remote controller and then use the menu to choose a source you want to view in the PIP windown How come my TV guide in my HDTV set The guide information is sent by the broadcast company is not updated Contact the broadcast company to see if it is available PAGE 30 CI mw How do I connect a set top box to the There are five ways to connect Composite video S video Component DVI and VGA Any of these will work How many line of resolution does my set PDP4249G is with 852 H x 480 V resolution How many video input does the PDP4249G PDP4249G has six video inputs AV S Video Componentx2 DVI How much does the PDP4249G weigh PDP4249 weigh 48 KG I am connecting my DVD player to the When connecting DVD player using Component input please look PDP4249G using the component video for Component Audio Output for Audio input How come I am not getting any audio I can receive video but with no audio sound Please check if the video input is the same as the Audio input Check on my set What is wrong if the power of the speakers is on and the cable is connected properly If still getting no auido sound contact your local dealer is my PDP4249G support High Definition Yes this PDP4249G supports up to 1080i s
32. ure will be However inappropriate setting of brightness may cause pictures to have whitish images Contrast 1 Under the function of Picture please select Contrast 2 Use the Left or Right key to adjust the Contrast Ratio Note Contrast ratio may have certain effects on brightness The higher the value of Contrast the higher Black White level the pictures will show Auto Image 1 Under the function of Picture please select Auto Image 2 When Auto Image is selected Brightness and Contrast automatically tuned to the optimal value PAGE 10 Advanced To access the function of Advanced press Menu and select Advanced P cture Gamma Advanced Color Temp Source CTIRed Funcion a CT Green Utility CTIBlue uo Color Management Information ICC Green ICC Blue CA Gamma 1 Under the function of Advanced please select Gamma 2 Use the Left or Right key to adjust the Gamma Level Note Gamma is available in five levels Please set the level according to your preference Gamma is set in level one as the factory default setting Color Temp 1 Under the function of Advanced please select Color Temp 2 Use the Left or Right key to adjust the Color Temperature Note Color Temp is available in four levels including the user setup They are Co
Download Pdf Manuals
Related Search