TPMS 1209W03 USER MANUAL - Tire Pressure Monitoring System
Contents
1. Note 1 If you don t want to or you do not find it convenient to use the lighter plug using rechargeable batteries is an option for powering the Monitor The process for powering the Monitor by battery power is as follow 1 Take off the cover of the battery box on the back of the Monitor 2 Put three rechargeable batteries into the battery box 3 Cover the battery box 4 Turn on the Monitor Note 2 The lighter plug is a special plug with a transformer inside Note 3 On some vehicles the cigarette lighter will power off when the engine powers off If this happens or if the user accidentally pulls out the lighter plug from the lighter if rechargeable batteries are already emplaced inside the Monitor and the power of the batteries 1s enough to operate the Monitor the Monitor can switch to the battery power mode automatically with no detriment to the system Note 4 If you turn off the Monitor the Monitor can not receive information treat problems or display information and alarms at all Note 5 If the Lighter Plug is connected to the vehicle power and the car will not be 5 S amp T TPMS1209W030303 User Manual used for a long time the power maybe exhausted and the car may not be able to start Thus we strongly suggest that the user pull out the lighter plug or turn off the Monitor if the vehicle will not be used for a long time Transmitter 1 Inflate the tire to the standard pressure 2 Check the Tire Position2. Alert mode The audible alarm turns on and the Battery Icon flashes Treatment Recharge the batteries or connect the Monitor to the lighter plug immediately Specifications Operating Temperature of the Monitor 20 C 50 C Operating Temperature of the Transmitter 40 C 85 C Pressure Monitoring Range of the Transmitter 0 87psi Pressure Monitoring Precision 1 5psi Modulation type FSK RF Frequency 434 1 MHz Input Voltage 5V cigarette lighter adapter 1 2x3V rechargeable battery group Special Annex 1 Counterweight The provided counterweight is made from non lead zinc alloy and the 3M tape is used designed specifically for the North American market 2 LCD operating temperature For all of the LCD the lowest limitation operating temperature is 30 C the upper S amp T TPMS1209W030303 User Manual temperature limit for working mode is 70 C for storage the temperature limit is 85 C This is determined by the character of the LCD If the LCD works under lower temperature for example 30 C for a long time the LCD may be destroyed entirely On the Monitor there is a LCD screen for displaying the information In order to use the LCD properly we strongly recommend the user power off the display if the temperature inside the vehicle will be lower than 30 C for a long time 3 Checking and inflating the tire pressure once a certain time In order to ensure that your tires remain at optimum pressure levels it 1s strongly
3. alarm turn on together Treatment Press any key to stop the audible alarm The red alarm light remains on and the display reverts to the normal mode The red alarm light goes off only when the tire pressure returns to the standard level Low Pressure Level 1 Alarm when the tire pressure is 12 5 lower than the standard Alarm mode The alarm light Low Pressure Level 1 Warning Icon and the audible alarm turn on together Treatment Press any key to stop the audible alarm The red alarm light remains on and the display reverts to the normal mode The red alarm light will automatically turn off S amp T TPMS1209W030303 User Manual when the tire pressure returns to the standard level Low Pressure Level 2 Alarm a pi Function The system will issue a Low Pressure Level 2 Alarm L D J4 when the tire pressure is 25 lower than the standard Alarm mode The alarm light Low Pressure Level 2 Warning Icon and the Audible alarm turn on together Treatment Press any key to stop the audible alarm The red alarm light remains on and the display reverts to the normal mode The red alarm light will automatically turn off only when the tire pressure returns to the standard level Low Pressure Level 3 Alarm an on Function The system will issue a Low Pressure Level 3 Alarm when the tire pressure is 50 lower than the standard Alarm mode The alarm light Low Pressure Level 3 Warning Icon and the Audible alarm turn on together Tre
4. inside the tire rise after running for some time A This is because of the friction between the tires and the ground Heat from the friction of a moving tire will cause pressure inside the tire to rise The pressure inside a tire can fluctuate up or down approximately 2 4psi depending on the speed of the vehicle This is normal for most vehicles 7 Q Why is the Monitor Display not turning on A If the Monitor Display is being powered by rechargeable batteries please check whether the batteries are installed in the correct polarity and if batteries have enough power If the Monitor is powered by the 12V Lighter Plug please 21 S amp T TPMS1209W030303 User Manual check the connection between the Lighter Plug and your TPMS unit If this does not solve your problem please contact our customer service line at 86 21 50792951 Warranty Terms Valid Warranty Card 1 The Warranty Card must be filled completely signed by the user and the authorized distributors of S amp T TPMS 2 The Warranty Card is valid in the countries or regions where the purchase occurs 3 The Warranty Service requires user to offer the Warranty Card Warranty Condition Responsibility and Limitation 1 The product warranty period is one year and 1s subject to the time marked on the invoice 2 Any damage or faults due to improper use are not involved in the warranty commitment 3 Users are not allowed to open repair and refit the products by themselves otherwise
5. not appear please contact our customer service line at 86 21 50792951 3 Q Sometimes the LCD screen is not very clear A This usually happens when the temperature inside the car is too low When the temperature returns to normal the display will become clear again If the LCD screen remains unclear while the temperature has returned to normal for more than half an hour the LCD may have been become permanently damaged due to exposure to low temperatures In this event please contact our 20 S amp T TPMS1209W030303 User Manual customer service line at 86 21 50792951 Note Please do not leave the Monitor Display with the power on in low temperatures for example 30 C for an extended period of time 4 Q Why does the power level of the rechargeable batteries become shorter A Low temperatures will influence the work time of the recharged batteries If the temperature is the car is too low for example 30 C we recommend that you power the Monitor Display through the 12V Lighter Plug Once the temperature returns to a higher level the batteries should operate as normal 5 Q Blurriness appears on the LCD screen or there the LCD screen is blank Sometimes the audible alarm also can be heard A This is usually caused by rechargeable batteries of the Monitor Display being low on power Change the batteries or connect the Monitor Display to the vehicle power through a 12V Lighter Plug immediately 6 Q Why does the pressure
6. recommended that the user check and adjust the pressure in each tire once a month 4 How to change a new Transmitter If one of the Transmitters is broken or the Transmitter fails to work you should change a new Transmitter for the tire The broken Transmitter will not influence the other Transmitters operation only the broken one needs to be changed User can buy anew Transmitter and change it according to the following steps 4 1 Remove the broken Transmitter Use the special tool to loose the three bolts inside the sockets on the Security Lock then screw off the Transmitter and remove the Transmitter and the Lock from the valve 4 2 Find out the ID number of the new Transmitter Take out the new Transmitter from the package the ID number of the new Transmitter should be printed on the Introduction Manual or the Color Packing Board 17 S amp T TPMS1209W030303 User Manual The ID number has 12 digits 4 3 Select the Tire Position for the new Transmitter on the display First screw on the new Transmitter Then operate the following steps on the Monitor Note Under the ID Programming interface if there is no operation for 5 minutes the system will return to the normal mode automatically d Spot Under the operation mode press and hold the E key for 3 i Figure 4 1 mea oe ies r Figure 4 2 Figure 4 3 Figure 4 4 seconds to access the Programming interface At this time the pressure unit info
7. the warranty service will be invalid 4 The warranty does not include replacement of the enclosure and display panel 5 The warranty does not cover product damage due to abrasion and corrosion Important Notes 1 The Warranty Card must be filled completely and its number shall be quoted whenever the user requires the service 2 Please inform Sate in the case that the telephone number or address on the Warrant 22 S amp T TPMS1209W030303 User Manual Card are changed 3 The warranty responsibility is subject to the conditions and limitations specified in the User Manual 23
8. TPMS 1209W03 USER MANUAL Suzhou Sate Auto Electronic Co Ltd www sate com cn S amp T TPMS1209W030303 User Manual Table of Contents S amp T TPMS1209W030303 Full time Direct TPMS 1 Parts of TPMS1209W030303 22222 22222 nn nee e enn n nee nen nnn n eee eee M 2 Installation 2 22 22 22 n een e ee ee nnn n nen e eee ene n ene e ener ee ee nnn e ee ee eee ne eneneeees 4 How to Inflate the Tire with a Locked Transmitter 8 Monitor Programming 0 0 20002 nennen nn nee ence nn neeennene 10 FUN CtiON 22 one nner nnn nnn nnn nnn nnn ener een nnn nner eer en een eeeeeeeeeees 12 SpecificationS 22 22 222222222 n nen n nnn nn nnn nee nnn n eee n ee ennneenneenenees 16 Special Annex 22 22 2222222222 nee n ne nn nn en ene nee ee nee n een n een n een nen nce nneennnes 16 Frequently Asked Questions 2222 22 22 2000 222 e ee nn nnn n nee eenn eee M 20 Warranty Term 222 222 2222 e nn nnn nn nnn nn nn ne ne en eee eee eee eee eee 22 Important Notes 22 22 2222 e ne enn nnn nnn en en nn ee ee ee ee ee eee eee eee 22 S amp T TPMS1209W030303 User Manual S amp T TPMS1209W03 Full Time Direct TPMS TPMS1209W03 is a ful
9. adjusted press A QE o ag a the E key to confirm and shift to the next interface the last 6 digits of ID number will appear on the display with a letter L acm The first number flashes as shown in Figure 4 7 Follow the above steps to adjust all the ID Numbers of the new Transmitter After the 12 digit of the ID Number is adjusted press the E key for 3 seconds to confirm this can also save all the 12 adjusted digits of the ID Number Then the ID Number Programming of the Transmitter 1s finished 19 S amp T TPMS1209W030303 User Manual 4 5 Exit the ID Number Programming Interface When the ID Numbers of the new Transmitter are programmed press the S key to shift the interface when the letter E appears on the display press the E key to exit the Number Programming Euan Interface and return to the normal mode as shown in Figure 4 8 Frequently Asked Questions 1 Q Why is it necessary to do a periodic check on the pressure of a tire with TPMS A As you drive tires can be damaged or become unbalanced over time Checking your tire on a regular basis will ensure that it is functioning properly and safely 2 Q After installation when changing the batteries or resetting the Monitor the pressure information doesn t appear immediately A Please wait for about 6 minutes If nothing happens reset the Monitor Display turn it off and on and wait for another 6 minutes If the current pressure information still does
10. atment Press any key to stop the audible alarm The red alarm light remains on and the display reverts to the normal mode The red alarm light will automatically turn off when the tire pressure returns to the standard level Quick leaking Alarm S amp T TPMS1209W030303 User Manual aJ oe net i m Function The system will issue a Quick Leaking Alert when the osp 34 pressure drop exceeds 2 8psi within 12 seconds E Alert Mode The alarm light and the audible alarm turn on the Quick leaking Icon flashes continuously Treatment Press any key to stop the audible alarm The red alarm light remains on and the display reverts to the normal mode Slow down the vehicle and stop at a safe place to inspect the tire The red alarm light will automatically turn off when the tire pressure returns to the standard level Transmitter Trouble Alarm the system will issue a Transmitter Trouble Alarm Alert Mode The red alarm light the Transmitter Trouble Alarm Icon and the audible alarm turn on together Treatment Press the any key to stop the audible alarm The red alarm light will automatically turn off when the Monitor can receive the signals from this tire position again Warning of Low Battery Power S amp T TPMS1209W030303 User Manual fo J Liars Function The system will issue a warning alarm when the battery E J4 0 power is not enough to afford the Monitor to work when the Monitor powered by the battery group
11. dard Pressure of all the tires are programmed press the E key to bring the display to back to the normal mode Note The standard Pressure Programming for pressure unit psi and kPa are almost the same The only difference is that when kPa is chosen as the pressure unit the Standard Pressure has 3 numbers and the third number of the Standard Pressure for each Transmitter is 0 it can not be adjusted user can only press the E key to confirm it Function Power Switch automatically The Monitor can be powered by the vehicle power through the lighter plug or the rechargeable battery Using vehicle power is strongly recommended If the lighter plug is inserted into the power socket of the Monitor even if the battery group is also inside the Monitor battery box the Monitor will still draw power from vehicle power But when the vehicle power is off for some reason the system will automatically switch to battery power The Monitor will work normally when powered by batteries rather than the vehicle in identical fashion If parked for more than 10 minutes when S amp T TPMS1209W030303 User Manual powered by the rechargeable batteries the Monitor will switch into the power saving mode But all the alarms can be received by the Monitor and it will send out alarms accordingly High Pressure Alarm tire pressure is 25 higher than the standard Alarm mode The alarm light High Pressure Warning Icon and the audible
12. essure alarm icon Pressure alarm icon High pressure alarm icon S amp T TPMS1209W030303 User Manual Lighter Plug 3M Dual Lock Fastener Installation Monitor 1 Take out the Monitor from the box 2 Choose a suitable location for the Monitor on the dashboard platform Make sure to first scrub the surface of the platform with alcohol Next strip off the liner of the 3M Dual Lock Fastener put the sticky side onto the suitable location then fix the Monitor with the other side of the 3M Dual Lock Fastener on the dashboard Note 1 In order to stick the Monitor firmly on to the dashboard we strongly suggest the user scrub the location with alcohol 2 There are 4 pieces of the 3M Dual Lock Fastener in the packing box One was affixed for you on the bottom of the Monitor in the factory you can choose either one of the other three pieces in the box to put it on the dashboard with the remaining two as a spare 3 Plug the small end of the lighter plug into the socket on the side of the Monitor 4 S amp T TPMS1209W030303 User Manual and put the big end of the lighter plug into the lighter socket of the vehicle 4 Turn on the Monitor by switching to On 5 Once the Monitor starts to work the screen should start to display the pressure of the four tires in turn Before the Transmitters are installed the pressure and the unit information will be shown on the screen as ps1
13. l time direct tire pressure monitoring system which includes one wireless Monitor and four screw on Transmitters The Transmitters can be screwed onto the tire instead of the cap of the valve and then senses the pressure inside the tire all the time while transmitting the pressure information data to the Monitor by RF technology The Monitor can receive and deal with the data then display the pressure on the screen The Monitor can issue different alarms if the tire pressure is under an improper state based on the standard pressure S amp T TPMS1209W03 can sense and display the tire pressure all the time and can issue an alarm when the tire pressure 1s at an improper level so as to notify the driver to treat the problem and prevent tire busting or tire damage Through TPMS1209W03 the driver can keep the tire at a proper pressure so as to avoid excess gasoline consumption and keep the vehicle under an easily controlled state S amp T TPMS1209W030303 User Manual S amp T TPMS1209W03 Parts Monitor Coverof Display battery box Select key 4 Enter key Power switch Alarmlamp Fower socket Transmitter amp Security Lock SSS specitaltoolfor the lock Display Pressure A psi Pressure unit psi Tire position vensor trouble alarm icon IKP Pressure unit KPA oo i Standard Pressure Seta ie ae Standard Pressure icon mE 2 Battery power Quick leaking alarm icon Level of low pr
14. mark on the Transmitter shell the FL is for the front left tire the FR is for the front right tire the RL is for the rear left tire and the RR is for the rear right tire 3 Check whether the rubber seal is placed smoothly and suitably inside of the copper stem of the valve 4 Screw off the current cap of the valve on the tire Note IMPORTANT TPMS1209W03_ provides a Security Lock for each Transmitter to prevent the Transmitter from being stolen or lost The use or disuse of the Lock will not influence the work of the Transmitters If you want to install the Lock please follow the Installation Steps of the Security Lock on Page 5 The Lock must be installed together with the Transmitter 5 Screw the Transmitters corresponding to each tire position onto the valve 6 Check each connection of Transmitter and valve with the soap solution to confirm whether the Transmitter is firmly screwed on to the valve or not Also check whether there is air leakage caused by the installation or the seal of the Transmitters or not 7 Once screwed onto the tire Transmitter can sense the pressure inside the tire and 6 S amp T TPMS1209W030303 User Manual transmit the data to the Monitor Information should appear on the screen within six minutes of installation Note 1 If one of the Transmitters is broken or fails to work the others won t be influenced Only the broken one or the lost one needs to be changed or replaced Note 2 The Transmitte
15. nsmitter be screwed firmly onto the valve as shown in the left figure Then the Transmitter can not be screwed off unless the three How to inflate the tire with a locked Transmitter Before inflating the tire please 1 Use the special tool to loose the three bolts inside the sockets on the Lock 2 Screw off the Transmitter 3 Remove the Transmitter together with the Lock from the Valve Note 1 The Lock will not influence the Transmitters operation you can choose whether or not to use the Lock while you install the Transmitter 2 The tires need to be re balanced after installing the Transmitter and Lock 8 S amp T TPMS1209W030303 User Manual Installation of the Counterweight In order to ensure that each tire remains balanced after installation of the TPMS Transmitters it 1s strongly recommended that the user attach the provided adhesive counterweights as shown below It 1s also recommended that the user takes their car to a qualified service station for re balancing after Transmitter installation To install the counterweight 1 Remove wheel covers if required and apply directly to rims 2 Clean the location where the counterweight will be placed with water cleaning most dirt particles off first then with rubbing alcohol then give a final clean to the surface This location should be directly across the position of the Transmitter on the wheel see diagram 3 Take out the counterweight from the accessor
16. rmation appears on the interface as Figure4 1 Press the S key to select the Standard Pressure Programming interface the SP icon flashes as shown in Figure 4 2 Then press and hold the E key for 3 seconds to access the ID Number Programming interface At this time the first 6 digit of ID Number of the Front Left tire appears as shown in Figure 4 3 The letter H standards for the First 6 digits of ID Number of the Transmitter Press the S key to shift the interface the Last 6 ID Numbers of the Front Left tire appears as shown in Figure 4 4 The letter L standards for the Last 6 digits of the ID Number of the S amp T TPMS1209W030303 User Manual Transmitter Press the S key to shift the interface the First 6 digits and the last 6 digits of the ID Number of each Transmitter will display in turn Figure 4 5 On the interface of the position which needs to change the Transmitter press and hold the E key for 3 seconds to confirm and the first number of the first group ID Number flashes as shown in figure 4 5 4 4 Program the ID Number of the Transmitter on the Selected Tire Position Press the S key to adjust the first digit of the ID number and press the E key to confirm it Then the second number flashes press the S key to adjust it and press the E key to confirm as a shown in Figure 4 6 Then the following numbers will flash one by One When all the first 6 digits of the ID number are
17. rs should be installed after the Monitor is installed Security Lock specialtoolfor the lock TPMS1209W03 has a Lock and a special tool for the Lock for each Transmitter to prevent the Transmitters from being stolen The Transmitter Lock has three sockets on it and each socket has a bolt in it as shown in the above figure The function of the Security Lock is to connect the Transmitter and the Lock by connecting the meshing part of them and then fasten the Lock firmly by the three bolts in the sockets thus the Transmitter with the Lock can be firmly screwed onto the valve and cannot be stolen or be screwed off by a sudden force Installing the Lock or not will not influence the functions of the Transmitter The customer can choose whether use the Security Lock or not Note If the customer chooses to use the Lock the following installing steps should S amp T TPMS1209W030303 User Manual be follow the Transmitter Installing Term 4 Installation step of the Security Lock 1 Connect the meshing parts of the Transmitter and the Loc First connect the meshing parts of the Lock and the Transmitter to make them an integrated part then screw the Transmitter together with a the Lock firmly onto the valve as shown 1n the left figure 2 Lock the Transmitter 3 hri bolts are screwed off by using the special tool Use the special tool to screw the three bolts inside the sockets on the Lock Let both the Lock and the Tra
18. sure units psi and kPa will appear on the screen as shown in figure 1 1 a ba s Then press the E key to access the Pressure Unit Switch interface as shown in figure 1 2 10 S amp T TPMS1209W030303 User Manual Figure 1 2 Press the S key to switch the Pressure Unit between the ps1 and kPa Then press the E key to confirm the selected Pressure Unit Figure 1 3 2 Standard Pressure Programming Under the operation mode press and hold the E key for 3 seconds to access the programming interface Then press the S key to Figure 2 1 Select the Standard Pressure Programming interface the SP icon flashes as shown in figure 2 1 Press the E key to access this program The first number of the Standard Pressure of the Front Left tire is flashing as shown in Figure 2 2 figure 2 2 Press the S key to adjust the number and press the E key to confirm it Then the second number of the Standard Pressure of the Front Left tire will flash as shown in figure 2 3 Figure 2 3 S amp T TPMS1209W030303 User Manual After the 2 numbers of the Standard Pressure of the Front Left tire are programmed press the E key to confirm As it shifts to the Standard Pressure Programming of the Front Right tire the Figure 2 4 first number of it flashes as shown in figure 2 4 Follow the above steps to program the Standard Pressure of the other tires When the Stan
19. y bag in the package and remove the liner material on its back Note If attaching the Transmitter without the Lock use the 15g counterweight If attaching the Transmitter with the Lock use the 15g counterweight Pa Counterweight The Tire should be ina Balanced Condition before the Sensor Centre of the wheel Installation TPMS Sensor 4 Place the counterweight on the cleaned location as shown in the figure below 9 S amp T TPMS1209W030303 User Manual Note 1 It is recommended that your vehicle tires are balanced prior to installing the Transmitter 2 If you notice significant vibration from your tires before installation it 1s recommended that you bring your vehicle to an auto service station for tire balance Monitor Programming Under the operation mode press and hold the E key for 3 seconds to access the Programming interface Then press the S key the interface will switch between the interface of Pressure Unit Switch and Standard Pressure Programming If there is no operation for 5 minutes the system will exit the programming interface and return to the normal operating mode 1 Pressure Unit Switch The system provides 2 pressure units kPa and ps1 Users can choose the unit as following aw an Under the operation mode press the E key for 3 seconds to access the Programming interface Then press the S key to select the Figure 1 1 Pressure Unit interface and the pres
Download Pdf Manuals
Related Search