Home

TouchKit Software User manual for Windows 7

1. On Touch r Beep On Release Beep From System Beep Duration Beep From Sound Card Linearization Style 9 Points 25 Points Double Click Time Sharterz gt gt Double Click Area 5Smallerz lt d gt gt O Normal Mode Option ma Function buttons and check boxes described as below Beep 1 Beep On Touch Check this check box to enable driver to generate a beep sound when touch touchscreen state is switched from untouched to touched state 2 Beep On Release Check this check box to enable driver to generate a beep sound when touchecreen state is switched from touched state to untouched state 3 Beep From System Beep Check this check box to make the beep from system speaker 4 Beep From Sound Card Check this check box to make the beep from sound card TouchKit V5 10 5 14 5 Frequency Adjust this frequency to control the beep sound frequency generated by the driver 6 Duration Adjust this duration to control the beep sound duration Linearization Style Touchkit utility provides user with both 9 points and 25 points calibration for linearization User can select the suitable kind of linearization type Double Click Time The Double Click Time group is used to set system double click time Change this value will affects the double click behavior for all of the mice devices in the system Two continuous
2. mapping and multiple monitor function enabled Operation Mode Touchkit driver support split display mode for those applications which do not map the touchscreen to the full screen of the monitor 1 Full screen The touchscreen will be mapped to the full screen of the specified monitor 2 Right screen The touchscreen will be mapped to the right half screen of the specified monitor 3 Left screen The touchscreen will be mapped to the left half screen of the specified monitor 4 Upper screen The touchscreen will be mapped to the upper half screen of the specified monitor 5 Lower screen The touchscreen will be mapped to the lower half screen of the specified monitor 6 Other operation mode 6 1 Quarter 1 The touchscreen will be mapped to the first quarter area of the specified monitor display 6 2 Quarter 2 The touchscreen will be mapped to the 2 quarter area of the specified monitor display 6 3 Quarter 3 The touchscreen will be mapped to the 3 quarter area of the specified monitor display 6 4 Quarter 4 The touchscreen will be mapped to the 4 quarter area of the specified monitor display 6 5 Customized If the touchscreen needs to be mapped the area other than the above area user can define the mapping area for application With this mode the driver does not TouchKit V 5 10 5 19 correct the mapping area when the display resolution changed It needs to do configuration setting again whene
3. clicks at the same area within this specified time period will be recognized as a double click event Double Click Area The double click area group is used to set the system double click area Change this value will affects the double click behavior for all of the mice devices in the system Twice continuous click with this specified area in the specified double click time will be recognized as a double click event Mouse Emulation mode There are 5 mouse emulation modes for TouchKit touchscreen controllers Press on the button to change the emulation mode 1 Normal Mode Normal mode behaves mouse button down and mouse move User can select this mode to select object and dragging the object 2 Click On Touch With this Click On Touch mode the driver emulates a mouse click event when the touchscreen state was switched from un touched state to touched state Then the driver always generate mouse move event and is tracking the touch position until the touchscreen state switched to un touch state TouchKit V5 10 5 15 3 Click On Release With this Click On Release mode the driver emulates a mouse click event when the touchscreen state was switched from touched state to un touched state 4 Click On Touch without moving cursor With this mode the driver behaves similar as Click On Touch mode The cursor does not move to the touch position except the first touch point 5 Click On Release without moving cursor With this mode the
4. input from Touchkit touchscreen control and un check it to stop driver generating the mouse event 4 Enable cursor stabilization A software filter was implemented inside the driver to filter some noise to stabilize and smooth the touch points Then the user can see a more stable cursor Check this check box to enable this software filter and un check it to disable this function 5 Constant Touch Area Hold area Adjust the parameter for Constant Touch Hold function This is a criterion to judge if the most recent touched point is same as the previous touched point If the point difference is within this area it will be recognized as the same touch point and the driver does not generate new mouse event for this new touch point 6 Auto Right Click Time Adjust the Right click time for auto right click function If the touchscreen was touched and hold for this period of time the driver generates a mouse right click event TouchKit V5 10 5 17 2 4 Display Property Page Touchkit utility supports multiple monitor and display system To work with multiple monitor system user needs to do proper configuration to map the touchscreen working area to the correct system display area User can do such configuration with this property page shown as below Touchkat USB Controller Edge Compensation General Display Double click on the monitor area to map the touchscreen to the display monitor Enable Multiple Monitors Ma
5. 1 2 18 F 03 2011 2 18 FF 03 2011 2 18 F 03 2011 2 18 03 2011 2 18 F 03 2007 6 4 EF 10 13 2007 4 25 FF 02 2006 5 24 B 12 2009 11 24 F 0 2011 1 19 EF 11 2007 4 9 FF 04 17 2009 11 24 FF 0 2009 11 24 FF 0 2008 10 6 F 03 Type File folder File folder File folder Application extens WinRAR BBS HDR File WinRAR E38 Application extens BIN File Windows Batch File ISS File Application Configuration sett InDesign XML Inte ISN File ISS File Text Document XPO File Double click at the setup exe then windows starts to run the installation program Welcome to the InstallShield Wizard for Touchkit The InstallShield Wizard will install Touchkit on your computer To continue click Next Back Next gt 1 Cancel Press Next button to continue installation then a new dialog popped up as below TouchKit V5 10 5 Setup Type Select the setup type that best suits your needs Extra P572 interface driver for Touchkit controller Please check the check for P5 72 touch controller Touchkit InstallShield Wizard Warning The PS 2 mouse port was selected The PS 2 mouse may be disabled when the computer is restarted This dialog shows to ask user if the PS2 filter driver for touch screen to be installed User can check this check box for PS2 filter driver installation The standard PS2 mice can still work w
6. S2 mice and Touchkit touchscreen controller It can works with both PS2 mice and Touchkit touchscreen PS2 controller After the Touchkit PS2 driver was installed this utility assumes the PS2 touchscreen controller exists and is always shown in the controller list window Remove This function button is used for serial RS232 controllers only This button will be greyed and disabled automatically when the selected controller in the controller list window is not RS232 type Press to remove and uninstall the selected serial RS232 controller from the system Then this serial RS232 icon object in controller list window disappears automatically USB Touchkit device supports plug and play the icon object for USB controller will be shown in the controller list window automatically when the USB controller is connected with the system USB port And the icon object for the USB controller will disappear automatically as soon as the device was removed from the system USB port Touchkit utility does not allow user to remove uninstall the PS2 device driver dynamically To uninstall the Touchkit PS2 driver user needs to go to Windows Device Manager to do un installation In addition after PS2 un installation it needs to system reboot to complete un installation Monitor Mapping Touchkit driver utility supports multiple monitor and display system This function will help user to do monitor mapping a new window will be popped up on a monitor as below Plea
7. TouchKit V5 10 5 TouchKit Software User manual for Windows 7 Version 5 10 5 CONTENT CHAPTER 1 INSTALLING TOUCHKIT eere nnne 2 CHAPTER 2 USING TOUCHKIT UTILITY urere nun 9 2 1 Gran Ue re a PUTEM 9 22 TOOL e 11 2 3 vg 14 2 4 BIET 18 2 9 COMPENSA ON E Ra RU A 20 2 6 Hard Wate em 21 2 PNDOUU 22 CHAPTER 3 UNINSTALLING TOUCHKIT eee eee en 23 TouchKit V5 10 5 1 Chapter 1 Installing TouchKit Touchkit driver software installation package contains files as below 1 Touchkit 5 10 5 8818 Search Touchkit 5 10 5 8818 p Organize v VY Favorites RE Desktop ij Recent Places J Downloads eGalaxTuner v2 0 2 Libraries C Documents Music Pictures Videos Computer amp L Local Disk EDGE 160 F Network Include in library v Name di global di 4 d x86 amp Setup dll m B datal _ datal hdr B data2 gt ISSetup dll _ layout bin PS2setup _ PS2setup iss EY setup setup 2 setup _ setup isn _ setup iss _ setup TouchKit xpo a 18 items Share with Burn New folder Date modified 2011 5 17 02 2011 5 17 F 02 2011 5 17 B 02 2006 5 17 EF 11 201
8. ch programs and files TouchKit V5 10 5 8 Chapter 2 Using TouchkKit utility There are seven property pages in TouchkKit utility and they are General Setting Tools Display Edge Compensation Hardware and About Each property page contains different functions for users to do the adjustments Therefore users can easily manage all the TouchKit controllers through TouchkKit Utility 2 1 General Property Page The general property page in Touchkit utility shows all of Touchkit touchscreen controllers installed as below s Touchkit USB Edge Compensation Hardware About Setting Tools Display Installed Touchscreen Controllers USB Controller Monitor Mapping In addition there are 3 function push buttons in this property page Add The function button is used for serial RS232 controllers only Press this button to search the Touchkit serial controllers connected with the system COM ports Whenever it finds a new Touchkit serial controller a new serial controller icon object will be shown in the controller list window automatically USB Touchkit device supports plug and play the icon object for USB controller will be shown in the controller list window automatically when the USB controller is connected with the system USB port And the icon object for the USB controller will TouchKit V5 10 5 9 disappear automatically as soon as the device was removed from the system USB port Touchkit PS2 driver support P
9. driver behaves similar as Click On Release mode The cursor does not move to the touch position except the lift off point Option User can set configuration for some advanced functions with this option button Press this button a pop up property sheet window will be popped up and shown as below Option Function Enable Auto Right Click wv Enable Touch Enable Cursor Stabilization Constant Touch Area 5 Smaller gt Bigger Auto Right Click Time 1000 ms Shorterz c LIL gt gt Longer Cancel 1 Enable Constant Touch Hold Constant Touch is the function to check if the most recent touched position is same as the previous touched point If the point difference is smaller than the defined area the driver does not generate any mouse event to reduce system loading Check this check box to enable this function Hold and un check it to disable this function TouchKit V5 10 5 16 2 Enable Auto Right Click If the touchscreen was kept touched for a specified time the driver will generate mouse right button click event if this function was enabled Check the check box to enable this function and uncheck it to disable this function 3 Enable Touch The driver read the data input from controller to generate mouse event However it can be enabled or disabled to generate the mouse event Check this check box to make driver to generate the mouse event when it receives the touch point
10. ell after this filter driver installed because Touchkit PS2 filter driver can work with both standard PS2 mice and PS2 touchscreen But this filter driver may does not work with other devices with the PS2 mouse port After check or uncheck this check box press Next button to continue installation Then it shows new dialog as below TouchKit V5 10 5 3 Setup Type Select the setup type that best suits your needs Do 4 point calibration after system reboot 5 Ever system boot up 7 Next system boot up Back Come Also Touchkit software provides user with a fast 4 points calibration If the system needs 4 points calibration to make sure the touch accuracy every system reboot user can check this check box The 4 points calibration window will be popped up for calibration whenever system boot up if this check box was checked during driver software installation Press Next button to continue installation The setup program prompts a message box to hint user to make sure that the Touchkit USB controller devices were well connected with system USB ports to guarantee the USB touchkit device drivers updated after driver installation Then just press OK to continue A Touchkit InstallShield Wizard DE If you are trying to install the USB touch device please make sure F that your touch monitor or touch controller s USB cable is plugged into the computer now Please close the Found New Hardware Wizard d
11. er enough data for computation TouchKit V5 10 5 12 Clear and Calibrate Press this button to erase the 25 points calibration linearization parameters and force user to do 4 points calibration again After 25 points calibration data was clear the 4 points calibration data will be invalid It needs to do 4 points calibration Linearization Linearization 250 9 points calibration function is used to compensate the touchscreen linearity After linearization completed the linearity of the touchscreen will be shown in the Linearity curve window Pressing this button a new window will be popped up at the location when the touchscreen was mapped to area for this touch system to guide the user do 25 points calibration User should follows the guide to touch and hold the blinking symbol in the calibration window until it shows OK to make sure that the utility can gather enough data for computation Draw Test This function is used for accuracy and performance check Press this button and a new pop up window will be popped up in the location where the touchscreen was mapped to the touch system as below User can press the Clear button to clear the window Press Quit button to terminate this draw test TouchKit V5 10 5 13 2 3 Setting Property Page The Setting property page can be shown in TouchkKit Utility as below Touchkit USB Controller Edge Compensation Hardware About General i Display F i
12. ialog when it appears TouchKit V5 10 5 4 Touchkit driver package supports multiple monitor operation If your application is for multiple monitors system please check the check box to support multiple monitors So that the a multiple monitor setting property page will be shown in Touchkit utility Then press Next to continue Setup Type Select the setup type that best suits your needs IF want to use Mult Monitor please check the A pop up window for user to choose the target path the files will be copied to Then Press Next to continue Choose Destination Location Select folder where setup will install files Setup will install Touchkit in the following folder To install ta this folder click Mest To install to different folder click Browse and select another folder Destination Folder C Program Files T auchkt TouchKit V5 10 5 5 A dialog popped up for user to assign the target program folder Press Next to continue Select Program Folder Please select 4 program folder Setup will add program icons to the Program Folder listed below may type new folder name or select one from the existing folders list Click Next to continue Program Folder ACD Systems Acer 3G Connection Manager Administrative Tools Adobe Adobe Design Premium C5 4 Avira Dr epei HY SER Gamez Press Next to continue installation TouchKit V5 10 5 Se
13. p to main display if system has only one display monitor Operation Mode f Ful Screen Lower Screen Left Screen Upper Screen C Right Screen Other TON Display The system monitor display geometry was shown in the Monitors window in this page to show the locations of all of the monitors of the system User can follow below instructions to do the configuration Enable multiple monitor Check this check box to enable multiple monitor support and uncheck it to disable multiple monitor support When this function is disabled the touchscreen will be mapped to the primary monitor automatically When this function is enabled user can double click on the monitor area in the monitor geometry window to assign the monitor area where the touchscreen will be mapped In other word the touchscreen Will work with the selected monitor Then the selected monitor area rectangle line will be changed to be white and the other monitor rectangles line will be grey TouchKit V5 10 5 18 Map to main monitor when the system has only one monitor When the multiple monitor function was enabled and the system has only one monitor Driver allows user to generate the mouse event for the primary monitor or not when the touchscreens which were not mapped to primary monitor Check the check box to enable this function then the driver will generate the mouse event for the primary monitor even through the touchscreen was configured as other monitor
14. r new software installation C Program Files T auchkitstauch scat Jh yo Installs held Cancel TouchkKit will not be removed until system reboot Press Yes to reboot immediately or No to reboot later Removed Touchkit The Touchkit driver been removed To ensure proper operation the computer needs to be restarted will restart my computer later Remove any disks from their drives and then click Finish to complete setup Back Finish Cancel TouchKit V 5 10 5 24
15. se touch the touchscreen panel to do mapping In addition please do calibration after finish monitor mapping TouchKit V5 10 5 10 Press ESC to quit Press SPACE bar to skip to Next Screen Auto skip to next screen 2 2 Tool Property Page Calibration draw test tools and the linearity curve of the touchscreen were list in this property page shown as below for user to do touchscreen calibration and touch position test em Touchkit USB Controller Edge Compensation General Linearization Curve Clear linearization parameter and do 4 points alignment 9 points linearization for better touchscreen linearity Do draw test to verity the touch accuracy TouchKit V5 10 5 11 User can do calibration or draw test by pressing the function push buttons Linearization Curve Linearization curve of the touchscreen is list in this page for reference and trouble shooting purpose 4 points calibration needs calibration before the touchscreen can work accurately Whenever the user feel the accuracy lost user can do calibration again to get a more accuracy touch function Pressing this button a new window will be popped up at the location when the touchscreen was mapped to area for this touch system to guide the user do 4 points calibration 69 User should follows the guide to touch hold the blinking symbol the calibration window until it shows OK to make sure that the utility can gath
16. t all of the control parameters to factory default setting Cancel TouchKit V5 10 5 21 2 About Property Page About shows some information for Touchkit driver information General Setting Tools Edge Compensation Hardware Touch Screen Utility Copyright c 2000 2011 Version 5 10 5 8818 We provide a full range of controllers for both analog resistive and capacitive touch panels The resistive controller communicates with the PC system directly through RS232 PS or USB part The design is optimized for an accurate sensitive and quick touch performance as well as an ease of use interface The driver supports a set of operating systems i e Windows 7 TouchKit V5 10 5 Chapter 3 Uninstalling TouchKit Go to Start All Programs TouchKit Uninstall and execute it d Silicon Laboratories Control Panel Devices and Printers Default Programs TrueSuite Help and Support ube Windows Live Js Windows Virtual PC 4 Back m Fox Er 28 Search programs and files TouchKit setup dialog appears and prepares to uninstall InstallShield Wizard Touchkit Setup is preparing the InstallShield Wizard which will guide vou through the rest of the setup process Please walt Confirm dialog press OK to start un installation Cancel to cancel un installation TouchKit V5 10 5 23 Start to uninstall TouchKit Setup Status Touchkit is configuring you
17. tup Type Select the setup type that best suits your needs Select the features vau want to install and deselect the features you do not want to install Click Next to continue The setup program will scan system COM ports to detect if any Touchkit serial device was connected If yes it also pops up a message box for user to make sure if setup program install driver for this new found device Setup Status Touchkit is configuring your new software installation Mow scanning COM port D jg Cancel Information 1 Controller found on COMI add this controller Just Press Yes or No to confirm driver installation for this new found device TouchKit V5 10 5 7 Finally if PS2 filter driver was installed during this software installation a reboot dialog is popped up for system reboot request to complete driver installation InstallShield Wizard Complete Setup has finished installing Touchkit on your computer 5 No will restart my computer later The Touchkit driver has been installed ensure proper operation the computer needs to be restarted After driver installation a shortcut will be generated and shown on the desktop And a new file group generated for Touchkit as below Silicon Laboratories p a Control Panel um Devices and Printers Configure Utility Ej Default Programs Help and Support n TrueSuite Windows Live 4 Back Sear
18. ver the display resolution changed 2 5 Edge Compensation Property Page For some special touchscreen which can not reach to the edge area of the full screen Touchkit utility provides user with edge compensation tool to solve such problem and make it easy to touch the edge area without accuracy lost Stretch a little bit near the edge area amp Touchkit USB Controller Hardware Edge Parameters 5mallerz ir Bigger 0 Smallerz x gt gt Bigger Smallerz x gt gt Bigger Smaller lt lt gt gt Bigger Smaller x Bigger 0 Smallerz x gt gt Bigger i W Support Edge Compensation 10 Default User can set the stretch percentage for the 4 edges In addition it allows user to set an offset for the touch point for special application TouchKit V5 10 5 20 2 6 Hardware Property Page This hardware property page shows the model and firmware version of the touchkit touchscreen controller The software will query the hardware information from controller and show the information as below Touchkit USB Controller General Edge Compensation Controller Model SAT50DOUR Firmware Version 1 08D1 Hardware Setting mes User can adjust sensitivity and delay time according to TP feature and user habit Saturn Hardware Configuration Satum Hardware Configuration Improper Setting May Cause Touch malfunction r Delay Time Shorter lt lt gt gt Longer Rese

TouchKit Software User manual for Windows 7

Contents

Download Pdf Manuals

Related Search

Related Contents