USER MANUAL - Hoover Service
Contents
1. Twist the handle to manoeuvre under or around furniture BRUSH BAR SWITCH Press the brush bar on off button at the top of the unit Brush bar on carpet MINI TURBO BRUSH ASSEMBLY Assemble the mini turbo brush holder to the handle tube of the cleaner then put the mini turbo nozzle to the holder Brush bar off hard floor vf II Certain models only af 5 A A A E CLEANING TOOLS CLEANING THE STAIRS Handle All accessories can fit onto the end of the hose handle and handle tube Combine accessories depending on use It is dangerous to place the cleaner AS above you when cleaning stairs Mini Turbo Nozzle y g The Mini turbo nozzle is ideal for removing pet hairs DO NOT touch the rotating brush Parquet Nozzle The parquet nozzle is ideal for cleaning delicate surfaces Connecting Accessory to Hose i Plug in the long stretch hose in O Choose your accessory 3 Connecting accessory to hose ALWAYS work with the cleaner E the hose socket below you Ensure it is positioned up against the bottom step l Connecting accessory to Handle Tube Q Remove handle tube O Connect hose to handle tube Connect accessory to the STORING THE CLEANER handle tube Turn the cleaner off and remove the plug Wind the power cord around the cord storage hooks IMPORTANT When using cleaning tools the cleaner must be kept in the upright position particularly when cleaning stairs Hold un2. in accordance with local ms environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this appliance please contact your local city office your household and waste disposal service or the shop where you purchased the appliance C HOOVER Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU UK The Environment The symbol on this appliance indicates that this appliance may not This appliance complies with the European Directives 2006 95 EC 2004 108 EC and 2011 65 EU GETTING TO KNOW YOUR CLEANER HANDLE ANDLE RELEASE BUTTON EXHAUST FILTER PRE MOTOR MINI TURBO NOZZLE FILTER POWER ON OFF BIN RELEASE BUTTON BUTTON HANDLE TUBE BRUSHBAR ON RELEASE BUTTON CARRY HANDLE OFF BUTTON CORD STORAGE HOOK EXTENSION HOSE INNER CYCLONES CORD 2 1N 1 TOOL CREVICE TOOL DUST BIN EXHAUST FILTER COVER EXTENSION HOSE SOCKET BRUSH BAR WHEELS CLEANER RELEASE Put 2 in 1 tool and crevice tool on PREPARING YOUR CLEANER board storage area Insert the main handle in the cleaner body and then adjust handle up down to the desired height gt Recline to unlock the cleaner Plug in your machine and D Lo Ml SUPPLY CORD turn it on Do not run over the supply cord Clip the supply cord in the cord clip at the back of the handle to avoid accidentally running the cleaner over the cord and causing any damage
3. HOOVER GENERATION FUTURE USER MANUAL Ess IMPORTANT SAFETY REMINDERS This appliance should only be used for domestic cleaning as described in this user guide Please ensure that this guide is fully understood before operating the appliance Do not leave the appliance plugged in Always switch off and remove the plug from the socket after use or before cleaning the appliance or any maintenance task This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision If the power cord is damaged stop using the appliance immediately To avoid a safety hazard an authorised Hoover service engineer must replace the power cord Keep hands feet loose clothing and hair away from rotating brushes Use only attachments consumables or spares recommended or supplied by Hoover When using cleaning tools ensure that the appliance is kept in the upright parked position This will avoid possible damage to the carpet or floor covering When cleaning stairs do not position the appliance above you Static electricity some carpets can cause a small build up of static ele
4. ctricity Any static discharge is not hazardous to health Do not use your appliance out of doors or on any wet surface or for wet pick up Do not pick up hard or sharp objects matches hot ashes cigarette ends or other similar items Do not spray with or pick up flammable liquids cleaning fluids aerosols or their vapours Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord Do not continue to use your appliance if it appears faulty Hoover service To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer Do not stand on or wrap the cord around arms or legs when using your appliance Do not use the appliance to clean animals or people When using the cleaning tools ensure to always steady the appliance with your other hand This will ensure that the appliance does not fall while in use WARNING A thermal cut out switches off the appliance to prevent overheating if it is used when full or there is a blockage or dirty filters If this should happen then switch off unplug and correct the fault It will take approximately 45 minutes for the cut out to automatically reset be treated as household waste Instead it must be handed over to the E applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out
5. it while using hose or handle tube Certain models only MIKI EMPTYING THE BIN CLEANING THE PRE MOTOR FILTERS IMPORTANT Before emptying the bin make Q Rotate the upper part of the dust bin to open Q Take out the pre motor filter sure vacuum cleaner has been switched off To remove the bin from the cleaner press the bin release button Gently tap both filters to release Wash both filter and sponge under warm water until any excess dust the water runs clean Remove excess water by shaking and leave to dry for 24 hours Reassemble and refit filters to cleaner only when they are completely dry Hold the container over the Bin and press the easy open button The bin door will open and you can empty into a bin with no dust contact j IMPORTANT Ensure the pre motor filter and exhaust filters are reassembled to the cleaner before use CLEANING THE EXHAUST FILTER The exhaust filter should be washed every month Remove the exhaust filter from your cleaner and wash with lukewarm water Once emptied gently tap or shake the container to release any excess dust Do not overfill the bin above the max level line Remove excess water by shaking and leave to dry for 24 hours Refit filters only when completely dry A CHANGING THE BELT OR BRUSHES If your cleaner is not picking up efficiently the belt or brushes or both may need replacing but fi
6. ly reset IMPORTANT Do not run cleaner over the supply cord as this could damage the supply cord insulation IMPORTANT INFORMATION Hoover Service Should you require service at any time please contact your local Hoover Service Office Hoover spares and Consumables Always replace parts with genuine Hoover spares These are available from your local Hoover dealer or direct from Hoover When ordering parts always quote your model number USE ONLY HOOVER SPARES CODE U71 35601420 D146 35601418 Y31 35601419 P15 35601415 DUST amp BRUSH FURNITURE NOZZLE PET HAIR REMOVER NOZZLE J61 35601417 V29 35600744 G87PC 35600655 BEE PARQUET EXTRA NOZZLE Quality Hoover s factories have been independently assessed for quality Our products are made using a quality system which meets the requirements of ISO 9001 GUARANTEE STATEMENT The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee Subject to change without notice eee ee i Y GENERATION FUTURE Hoover Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU HOOVER CUSTOMER HELPINE 08444 995 599 PRINTED IN P R C 48017168
7. rbo nozzle Open the nozzle at each side lift cover and remove the blockage Certain models only User checklist If your cleaner is not working properly run through the following checklist 1 Is there a working electricity supply to the cleaner Check with another electrical product 2 Is the bin full or choked with fine dust To empty the bin see the User Manual on P6 3 Is the hose blocked To clear a blockage see the User Manual on P7 4 Is there a blockage in the cleaner base To clear a blockage see the User Manual on P7 5 Are the filters blocked To clean filters see the the User Manual on P6 6 Are the brushes rotating correctly To check the brushes see the User Manual on p7 7 Has the cleaner overheated If so it will take about 30 minutes to reset If there is any doubt call the Hoover Service Office for advice They may be able to assist you over the telephone A service charge will be made if the cleaner is examined and found to be in working order has not been assembled in accordance with these instructions or has been used incorrectly working order has not been assembled in accordance with these instructions or has been used incorrectly WARNING A thermal cut out switches off the cleaner to prevent overheating if it is used when full or there is a blockage or dirty filters If this should happen switch off unplug and correct the fault It will take about 45 minutes for the cut out to automatical
8. rst please make sure you have Emptied the bin e Cleaned the filters IMPORTANT Switch the cleaner off and remove the plug from the electricity supply e Checked for blockages O before attempting any maintenance Turn the cleaner over and remove 2 rear Hold the brush assembly and stretch the rollers and 2 retaining screws belt until the brush can be slotted back into the cleaner housing 5 Rotate the brush to ensure free movement of the belt Q Refit the brush guard with 2 retaining screws O Remove brush assembly and check for and 2 rear rollers wear on the belt Loop the new belt around the motor and brush channel NOTE When the brush was blocked and stopped rotating switch off and remove the plug from the electricity supply then use a pair of scissors to cut through any threads or hairs caught around the brush Reassemble the brush and brush guard a ae IMPORTANT Switch the cleaner off and remove the plug from the electricity supply O before attempting any maintenance Check the cleaning tools and hose for blockages The hose can be removed at both ends Turn the cleaner over and rotate the brushes to identify any obstructions including hair Check for a blockage in the hose socket Use a flexible rod to remove any obstruction Removing a blockage from the mini tu
Download Pdf Manuals
Related Search