Home

DVR User Manual - Columbus Home Security

1. Default Fig4 27 other alarm 48 Digital Video Recorder User Manual Step1 enter into system configuration gt other alarm refer to Fig 4 27 Step2 select a hard disk in the pull down list box when the disk capacity is lower than that value there will appear some text information on the lower right of the live image Step3 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 5 5 Alarm out Alarm out includes three sub menus alarm out schedule and buzzer Alarm out Step1 enter into system configuration gt alarm out refer to Fig 4 28 ALARM OUT Aa Out Saz ET Relay Name Hold Time s ALARM OUT 1 f Default Fig 4 28 system configuration alarm out Step2 in this interface set relay alarm out name select hold time which means the interval time between the two adjacent alarms Step3 user can setup all channels with same parameters tick off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface Schedule Step1 enter into system configuration gt schedule Step2 the setup steps of alarm out schedule are familiar with schedule user can refer to 4 4 1 Schedule for details 49 Digital Video Recorder User Manual Note the default schedule of motion detection is full selected that
2. 5 Preview Fig 4 42 cruise set modify cruise line 61 Digital Video Recorder User Manual b click Add icon En to set the speed and time of preset point select a E click Delete icon KA to delete that preset point click Modify icon ie to modify the setting of a preset point User can clic those icons to adjust the position of preset point Click Preview button to preview the cruise line click OK button to save the setting click Exit button to exit current interface c select a preset point in the cruise line list box click Delete button to delete that cruise line click Clear all button to clear all cruise line from the list box click OK button to save the setting click Exit button to exit current interface Step4 in the Advance interface click track Set button a dialog box will pop up as Fig 4 43 Y Stan Record lt O gt Focus Start Track Iris Fig 4 43 track set a user can control the dome rotates up up left down right down left left down right and up right and stop rotating adjust the rotate speed and the value of zoom focus and iris of the dome click Start Record button to record the move track of PTZ click this button again can stop record click Start track button to play recorded track click this button a can stop play b click icon to hide the tool bar right key can remerge it click icon to exit the current interface Step5 in the Advance interface click default button t
3. Advanced Default Fig 4 37 P T Z configuration serial port Step2 tick off Enable setup the value of address baud rate and protocol according to the settings of the soeed dome Step3 user can setup all channels with same parameters tick off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface Definitions and descriptions of network stream 58 Digital Video Recorder User Manual Parameter Meaning oO yO The address of the PTZ device Baud rate Baud rate of the PTZ device Range form 110 300 600 1200 2400 4800 9600 19200 34800 57600 115200 230400 460800 21600 Protocol Communication protocol of the PTZ device Range from NULL PELCOP PELCOD LILIN MINKING NEON STAR VIDO DSCP VISCA SAMSUNG RM110 HY Advance Step1 enter into system configuration gt P T Z configuration gt advance refer to Fig 4 38 P T Z Serial Port ANENE Preset Cruise Track Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Setting Default Fig 4 38 P T Z configuration advance Step2 in the Advance interface click preset Setting button a dialog box will pop up as Fig 4 39 9
4. 750 BNCx2 VGAX1 1280 1024 1024 768 800 600 352 288 704 576 PAL 352 240 704 480 NTSC 200FPS PAL 240FPS NTSC 200FPS PAL 240FPS NTSC Audio input 8dB 22k RCA X8 Audio output 8Db 92dB RCA X1 Alarm input NO or NC 8CH Alarm output 1CH Record Mode Manual Sensor Timer Motion detection Simplex Duplex Triplex Network Interface RJ45 LAN INTERNET PTZ control YES Communication interface RS485 USB2 0 x 2 one for backup another for USB mouse Disk info SATA x 1 DVD RW x 1 or SATA x 2 Remote controller Power supply 12V4A 108 Digital Video Recorder User Manual Appendix F 16 CH Specifications Video output Composite 1 0V p p 750 BNCx2 VGAX1 1280 1024 1024 768 800 600 352 288 704 576 PAL 352 240 704 480 NTSC 400FPS PAL 480FPS NTSC 400FPS PAL 480FPS NTSC Audio input 8dB 22k RCA X16 Audio output 8Db 92dB RCA X1 Alarm input NO or NC 16CH Alarm output 1CH Record Mode Manual Sensor Timer Motion detection Simplex Duplex Triplex Network Interface RJ45 LAN INTERNET PTZ control YES Communication interface RS485 USB2 0 x 2 one for backup another for USB mouse Disk info SATA x 1 DVD RW x 1 or SATA x 2 Remote controller Power supply 12V4A 109
5. Exit button to exit current interface 78 Digital Video Recorder User Manual Color adjustment Drag the slide bar to adjust Brightness Contrast Hue and Saturation Click Default to reset them to original value Buttons Cescription 2 Drag the scroll bar to adjust the brightness of channel Drag the scroll bar to adjust the contrast of channel no O Drag the scroll bar to adjust the saturation of channel G Click this button to recover the default value of brightness contrast saturation and hue d Drag the scroll bar to adjust the hue of channel Save the adjustment PTZ control Please connect speed dome to the device via RS485 firstly make sure the protocol of the speed dome is supported by the device and set the relative parameters manually User can control the dome up down right left or stop rotating on Control Center adjust rotation speed Iris and zoom focus on the dome and set the presets etc imeans the dome rotate up Wmeans the dome rotate up left Y means the dome rotate up right means the dome rotate down means the dome rotate left down 4 means the dome rotate right down means the dome rotate left means the Buttons definition dome rotate right Mmeans the dome stop rotating Iris button Click lo ton near Iris button to increase light of the dome Click Ml tor near lris button to decrease light of the dome 79 Digital Video Recorder User Manual
6. Pale CON OU e ias 28 O a abad at 28 A TAO OA LO A o E vyasas a E aae a E ETa statins nia eaa esa r sustain ea cates aa ee Neer erat ee rue 30 e Te nen de ener rer dd ie 31 2d Massa iaa dada 31 dd ROCO COMINO ada 33 od Ena tdi ii ida 33 4 3 2 Record SIM e AA dana 35 3 yg OS 36 BaD A TACO VOlS A tre acstae hy a E a maa naa as na atta ese ey N eG ee ee 37 O utente weer A a tanec eels wate an eee naa ga vata cae Meera an eats ace ea ta alee E E ee T eat ayaa 37 AA Schedule congu atos iana 38 Ed ochenta aii 38 E NO NN 40 A OW ec acdsee a st rence gn wa ties chide Eae E S E a nau aa EA te dans any EE Ea ae Ea E E ARa nears 41 O O 41 Ao SEAS iia dd dada 41 ae MO a A A o 45 A A a trative a Ee haane aa OT aa rn twin cated esa r E eee E Neneh erate ene eta 47 45 4 Other alai Meninin E sete connate sauce dacs edactsuatewssaneucaces us venenna seed aaa vaca ste e oc aescace stud Gi donee eteme sateen anaeanevas eens EEEa ia 48 Digital Video Recorder User Manual TN ANON 0 O OPE o O AN pean 49 AO INCIW OEIC COMMGUFAUON cs ln id ici 50 OM INCL WV OI da o o aNEs 50 Aa INGIWO lice We la ates ocio 54 A USStmanadenment con qUe 56 a O eer ee eee rrr 58 5 Record search amp playback and Da id e 63 scl MIG Lo APA ee varia eaneeaee een cab fas eee pete ea a eae ee eee eae ee ae eee 63 I2 Mb Ge ANGI separa OO 64 NM od 65 AC a anaes 66 6 Manage DVRs 68 Bob GHECK SV Stent INONMA ian e ii osa 68 ARAS E A aA as anesaaen eens e nae eae 68 A O 68 E
7. Take 8 channel DVR for example user can tick off 8 channels form 1 ch to 16 ch at random to display the live pictures Then click button to confirm the setting Click Menu utton the interface will pop up as Fig 4 2 press MENU button on the front panel or operate with remote controller also can display the main menu 24 Digital Video Recorder User Manual MAIN MENU xX S lil Search Backup Information gt Manual Alarm Disk Manage Upgrade Device Fig 4 2 system setup 4 1 Basic configuration Basic configuration includes three sub menus system date amp time and DST 4 1 1 System Step1 enter into system configuration gt basic configuration gt system refer to Fig 4 3 25 Digital Video Recorder User Manual BASIC System Date amp Time DST Device Name Device ID Video Format Password Check Show Time Show Wizzard Max Network Users Monitor VGA 1024X768 y Language English f Default Fig 4 3 basic configuration basic Step2 in this interface user can setup the device name device ID video format max network users VGA resolution and language The definitions for every parameters display as below Device name the name of the device It may display on the client end or CMS that help user to recognize the device remotely Video format two modes PAL and NTSC User can select the video format according to that of camera Password check enable this option user needs to input user name and passwor
8. by numbers and then the small keyboard will appear Please select number or letter to input the initial password is 123456 or you can use the digital keys in the front panel or the digital keys on the remote controller Q10 How to upgrade when added new functions or revised software After getting the upgraded software from manufacturer please copy it into U disk and then select upgrade in the menu If upgrading the kernel procedure please refer to the following method firstly insert U disk into DVR and then input adwsws in the password of system login and the system will upgrade kernel procedure automatically After finished please restart DVR to achieve Notice Do not power off in the system upgrading process Otherwise it may cause that DVR cannot start Q11 Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR And why must we format it again When DVR only uses one hard disk the hard disk removed from one to another same type DVR can work normally without format However when a DVR adds to a new hard disk it will identify the hard disk as a new one and inquire whether to format no matter whether this hard disk used or not in another same type DVR before In this condition it can be used normally after formatted according to the guide if two or more hard disks used in different DVRs when used in another DVR with the same type they will be identified to be two or more
9. can play that file and preview the picture Z2009 02 09 15 51 486 j gt i be 2009122406259 OS avi 06 25 29 T Record Date 2009 12 24 7 fast forward previous file full screen play pause stop next frame next file path a 00 00 06 00 00 00 i CAM 2 CAM2 wt CAMI F CAMA i wl CAMA File Name 200931224001802 0 Lavi 20091224062357_15 avi 20091224062529_09 avi 2009 1224062750_07 avi 20091224062751_16 avi 20091224062952_08 avi 20091224063015_05 avi 2009 1274063102 O6 avi 20091224065127 11 avi o AA Fig 7 7 Play record file interface Time 00 18 02 06 25 57 06 25 29 2 06 27 50 06 27 51 06 29 52 06 30 15 06 31 02 06 31 27 volume 81 Digital Video Recorder User Manual This DVR supports remote time search event search and file management By Time Search Step1 Enter into Search gt time search refer to Fig 7 8 Start time 2010 01 12 5 oo oo 00 Pie Te Se Fla Os Mio Ni TIZ O13 D O15 O16 Data information 00 00 04 00 08 00 12 00 i6 00 20 00 3 4 5 6 It 10 11 EFJ 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 7 Tm a o Y Mo Mio Mir M12 Mi3 Mi4 Mis Mis Fig 7 8 time search interface Step2 click Search button The record data will be displayed in the data information list box the highlight date in the area means have record 82 Digital Video Record
10. channel to other or all channels just only select channel and click Copy button Steps click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 4 2 Motion Step1 enter into system configuration gt schedule configuration gt motion refer to Fig 4 17 SCHEDULE Schedule Motion Sensor Channel Monday Tuesday Wednesday E Thursday Friday Saturday Default Fig 4 17 schedule configuration motion Step2 the setup steps of motion are familiar with schedule user can refer to 4 4 1 Schedule for details Note the default schedule of motion detection is full selected that is the color of schedule setting interface is blue 40 Digital Video Recorder User Manual 4 4 3 Sensor Step1 enter into system configuration gt schedule configuration gt alarm refer to Fig 4 18 Step2 the setup steps of alarm are familiar with schedule user can refer to 4 4 1 Schedule for details Note the default schedule of sensor is full selected that is the color of schedule setting interface is blue SCHEDULE Schedule Motion Sensor Default Fig 4 18 schedule configuration sensor 4 5 Alarm configuration Alarm configuration includes five sub menus sensor motion video loss other alarm and alarm out 4 5 1 Sensor Sensor includes three sub menus basic alarm handling and schedule Basic 41 Digital Vid
11. click Exit 43 Digital Video Recorder User Manual button to exit the current interface To record tick off recoding channels it will record the camera when alarm triggered Click OK button to save the setting click Exit button to exit the current interface To P T Z set linked preset and cruise for alarm User can select any channel and multi channels as linked channels Click OK button to save the setting click Exit button to exit the current interface Step4 user can setup all channels with same parameters tick off all then to do relevant setup Step5 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 8 Schedule Step1 enter into system configuration gt alarm configuration gt sensor gt schedule refer to Fig 4 22 SENSOR Basic Alarm Handling Schedule Channel Apply Settings to Copy Default Fig 4 22 sensor schedule Step2 the setup steps of sensor schedule are familiar with schedule user can refer to 4 4 1 Schedule for details Note the default schedule of sensor is full selected that is the color of schedule setting interface is blue 44 Digital Video Recorder User Manual 4 5 2 Motion Motion includes two sub menus motion and schedule Motion Step1 enter into system configuration gt alarm configuration gt motion refer to Fig 4 23 MOTION ion Schedule Trigger Y D
12. new hard disks and all of them need to format In general please do not try using more disks removed from different DVRs into another one in case the data lose Q12 What are the minimum confi urations of PC for clients connecting PC Module Parameters CPU Intel Celeron 2 4G 103 Digital Video Recorder User Manual Motherboard Intel 845 80G HDD VGA NVIDIA GeForce MX440 FX5200 Windows 2000 SP4 above Windows XP SP2 above VISTA Q13 What are the PC configurations for 16 ch real time product with fully open channel mainstream PC Module Parameters Parameters RAM VGA OS GMA3100 NVIDIA GeForce 8400 ATI RADEON HD3450 Windows 2000 SP4 above Windows XP SP2 above VISTA 104 Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings The DVR uses fixed video bit rate The below are jpe details at mpeg settings Frame Rate Viso Format Format Pesoton Video Quality Bit Rate Used Space MB h Totally FPS Hig Highest Higher e a se O E OE Lowest 2 E OO M O Highest Higher Medium Low Lower Lowest The calculation format is Total Recording capacity Used space per hour MB h coverage rate of hard disk x recording time hour xchannel numbers For instance one customer uses PAL cameras set resolution to CIF video quality to Lower frame rate to 25 f
13. security settings a Enable 4 9 Download signed Activex controls E Disable Security Settings Internet Local intranet Trusted sites Restricted Enable sites Prompt 4 Download unsigned ActiveX controls Internet 4 This zone contains all web sites you hes Disable haven t placed in other zones Prompt Security level for this zone 9 Initialize and script ActiveX controls not marked as safe Disable Custom Enable Custom settings Prompt To change the settings click Custom Level r e se eg E A vi To use the recommended settings click Default Level lt 2 Reset custom settings Default Level Reset to Medium wal Fig7 1 Fig7 2 Q8 How to deal with when DVR starts it displays please wait all the time First possible reason hard disk cable and data cable are not well connected Solution Please check the connection of hard disk cable and data cable and make sure they are well connected If still not working please unplug them and then try re plugging again 102 Digital Video Recorder User Manual Second possible reason It is forced to stop because hard disk has disabled track which causes the system checking hard disk cannot skip Solution Change another new hard disk or reformat the broken one Q9 How to input password and digital numbers The method to input password and digital numbers is to click the box behind password or items needing to input
14. select split mode 1x1and channel Step3 dwell time the time interval for a certain dwell picture display switching to next dwell picture display gt Step5 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 2 4 Mask User can setup private mask area on the live image picture max threes areas 4 selected the split mode then setup current picture group Click button to setup the previous channel groups of dwell picture click button to set the latter channel groups of dwell picture 31 Digital Video Recorder User Manual LIVE fine Main Monitor Spot Maen Mask Area Setting Setting Setting Setting Setting Setting Setting Setting Default Fig 4 10 live configuration mask Setup mask area click Setting button enter into live image to press left mouse and drag mouse to set mask area refer to below picture Click Apply button to save the setting Delete mask area select a certain mask area click left mouse to delete that mask area click Apply button to save the setting Setup mask area 32 Digital Video Recorder User Manual Live image mask area 4 3 Record configuration Record configuration includes five sub menus enable record bit rate time recycle record and stamp 4 3 1 Enable Step1 enter into system configuration gt record configuration gt enable refer to Fig 4 11 33 Digi
15. stream Color adjustment PTZ control status 4 Note click button to record manual and the record file will be saved in user s PC Screen display mode Click the icon beside the screen display mode channel select dialog will appear as below mo Moz Mos 404 los Mos Mloy los Oos O10 O11 O12 O13 O14 015 O16 Cancel Fig 7 3 Channel select dialog Take 8 channel DVR for example user can tick off channels form 1 ch to 16 ch at random to display the live pictures 8 channels can be selected at most Then click OK button to confirm the setting Snap pictures O 1 Click Snap icon select the picture number and refer to Fig 7 4 27 Digital Video Recorder User Manual channel channel 0 snap count 1 v Cite C time save to L Documents and Settings Administrator My Documents save a aan an JS 517573 46 channel 01 2010 01 12717 08 27 757 Fig 7 4 Single snap 2 User can multiple pictures select the picture number from Frame pull down list box such as 3 tick off Title and Time it will show capture title and time on the snap pictures simultaneously Refer to Fig 6 5 channel channel 01 snap count 3 title C time saveto C Documents and Settinas Administrator My Documents CAMI CAMI pde channel 01 2010 01 12 17 09 12 799 ily Fig 7 5 Multi picture snap 3 Click Browse to set saving path Click Save to save pictures to HDD on the computer click
16. 0009 Step6 Camera 1 is the default channel after login Change the channel in rolling down menu of Channel Pocket Camera Fil d 10 44 Xx Channel CAML H of 1CHs User PASAGI Ord rotos E Prom A Pr oil Notice User name and password here are the same with that used on the DVR The default is admin and 123456 User and Password and click Go to log on the 90 Digital Video Recorder User Manual 8 2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit Step1 Firstly enable the network access on mobile phone Then run Web browser Step2 Input the DVR server s IP address in a new built bookmark Click this bookmark to connect to the DVR ty Saved pages y Auto bookmarks 8 http 210 21 229 142 111 Goto Cancel Step3 A welcome window will pop up and requires a package Click the software name to download The mobile phone was detected based on Symbian 60 3rd We recommend that you download this SCam 3 080939 sisito install SuperDVR components Options close Step4 A security windows will pop up after downloading and ask if install the package Click YES to install Step5 A Scam shortcut icon appears on the system menu after finished Step6 Run Scam program lt will enter a function interface 91 Digital Video Recorder User Manual Live view to do mobile live view Image view to check the pictures s
17. 1 28 2010 16 01 49 01 28 2010 16 48 29 01 28 2010 16 48 29 0 0 Delete Fig 5 3 Search configuration file manager Step2 click Search button the searched files will be displayed in the file list box user can select date channels accordingly Lock checked a file click Lock button to lock this file after that that file will not be deleted or covered 2 Unlock checked a locked file click Lock button to unlock this file 83 Delete checked an unlocked file click Delete button to delete this file 65 Digital Video Recorder User Manual Steps tick off All button user can lock unlock or delete all files in the file manager column Step4 double click an unlocked item to playback Note when the monitor resolution is VGA800 600 the file manager interface will appear a hide button click this button the whole interface can be expanded 5 4 Backup This unit supports backup by built in SATA DVD Writer with USB Flash through the USB port on the front panel User also can make backup by IE browser via internet Refer to 7 3 2 Remote backup Step1 enter into backup configuration refer to Fig 5 4 BACKUP x Start Time End Time 01 28 2010 10 17 22 01 28 2010 10 17 22 ee 01 28 2010 11 04 02 01 28 2010 11 04 02 oo o0 o0 01 28 2010 11 50 42 01 28 2010 11 50 42 End Time 01 28 2010 16 01 49 01 28 2010 16 01 49 23 59 59 01 28 2010 16 48 29 01 28 2010 16 48 29 Y 1 I2 mi3 v J5 Mie Miz 4 Fi
18. 15 Digital Video Recorder User Manual The rear Panel interface for 16 ch is shown as Fig 2 8 100OGO O O 8 O 0 o ou 9 TS 6 Haas pf lt lt a pun LARM IN in E 3 AN vi n OU a iH Ee a FI ee 4 J f A O ey oe e D 6 Fig 2 8 Rear Panel for 16 ch 1 PZ Comnectto speed dome S O 2 KB_ Comnect to keyboard o O 3 ALARMIN______ MComnecttoexteralsensori 18_________________________ O 4 HDMipot Connect to high definition display device optional 0 O 5 NET Networkport S O 6 VGApot VGA output connect to monitor _________________________ 7 Videoout Connect to monitor S O 8 Videoin Videoinputchannelsfrom1 16_________________________ 9 Audioin 4 CH Audio input o O 10 POWER SWITCH Power on off o O 11 FAN_ Frorcoolingthedevice S O 12 5VandGND___ 5 V and Grounding gt gt O 13 ALARMOUT _ 1 ch relay output Connect to external alarm S O 14 USBMOUSE Only for USB mouse gt S O 15 Spotout Connect to monitor as an AUX output channel by channel Only video display no menu show 16 Audiooutt Audio output connect to the sound box 17 POWERINPUT DC12V IA Tab 2 4 Definitions of Rear Panel Buttons 2 3 4 5 7 10 11 12 13 14 15 16 17 16 Digital Video Recorder User Manual 2 4 Remote Controller It uses two AAA size batteries and works after loading batteries as following Step1 Open the battery cove
19. 2 Kbps z Higher 512 Kbps v 4 Higher 512 Kbps Default Fig 4 33 network configuration sub stream Step2 select fps resolution quality encode and max bit rate Step3 user can setup all channels with same parameters tick off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface Definitions and descriptions of network stream Parameter Meaning 3 3 3 3 3 3 3 Range from 1 25 Support CIF and D Quality The quality of the clients image The higher the value is the clearer the record image Six 55 Digital Video Recorder User Manual options lowest lower low medium higher and highest VBR and CBR Max bit rate Range from 64 Kbps 128 Kbps 256 Kbps 512 Kbps 768 Kbps 1Mbps 2 Mbps 4 7 User management configuration Step1 enter into system configuration gt user management configuration refer to Fig 4 34 USER MANAGER User Name User Type PC MAC Address admin Admin 00 00 00 00 00 00 r i Setup Delete Change Password Fig 4 34 user management configuration Step2 click Add button a dialog box will pop up as Fig 4 35 ADD USER leeneral Authority User Name Confirm Password AS User Type Binding PC MAC Address PC MAC Address 00 00 00 00 00 00 OK Exit Fig 4 35 add general 96 Digital Video Recorder User Manual General In
20. 200903409123950 pn9 C mwni_20090008123351 png C Mi_20090310053712 png Pic 4 Pic 5 tem Buttons Explanations Item Buttons Explanations Item Buttons Explanations EI Previous picwe 2 Pa Next Picture 3 EJ The first Picture 4 The last picture Delete a Search Pictures search page as Pic 5 Digital Video Recorder User Manual Appendix A FAQ Q1 Why the DVR cannot start after connected to the power a The adapter has been damaged Please change an adapter b The power of the adapter is not enough Please remove the HDD to check c Hardware problem Q2 There is not menu output or only has live image display a Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear Q2 The indicator of the DVR lights but no output Why a The power of the adapter is not enough Please remove the HDD or change an adapter to try b The video format of the DVR is different from that of the monitor c Connection problem Please check the cable and the ports of monitor and DVR Q3 Why are no images displayed on parts or all of the channels of the DVR a Connection problem Please check the cable and the ports of camera and DVR b Camera problem Please check the cameras c The video format of the DVR is different from that of the cameras Please change DVR system format Q4 Cannot find HDD a The power of the adapter is not enough Please change an adapter to try b Co
21. 2010 01 09 00 01 53 2010 01 09 00 02 18 2010 01 09 00 03 01 2010 01 09 00 54 27 2010 01 09 01 47 11 2 2010 01 09 01 47 12 2010 01 09 03 09 10 2010 01 09 03 19 45 2010 01 09 15 11 54 2010 01 09 15 16 17 2010 01 09 15 17 03 2010 01 09 15 19 30 2010 01 09 15 20 17 2010 01 09 15 21 54 2010 01 09 15 22 41 2010 01 09 15 24 04 O 2 2010 01 09 15 46 09 2010 01 09 15 46 52 2 Fle path Fig 7 12 remote backup interface Start time 2010 01 12 DO oO 00 End time 2010 01 12 23 54 lt 369 Mi M2 M3 Ha Ms Me Mz Ms Mo Mio Mii Mi2 Miz M14 Mis Mi6 Step1 select channels set the start and end time then click search button the file information will be displayed in the file list box Step2 select backup files click browse button to set the save path and then click backup button to start backup The backup files will be saved on user s PC 86 Digital Video Recorder User Manual 7 4 Remote System configuration User can remote setup the parameters of the device Functions of remote configurations include basic configuration live configuration record configuration schedule configuration alarm configuration network configuration PTZ configuration and user configuration User should firstly select an item in the menu list on the left and then setup the relative parameters When one user setup parameters of a certain item others cannot setup this on
22. 3 in this interface user can adjust brightness hue saturation and contrast in live click default button to resort default setting click OK button to save the setting Step4 user can setup all channels with same parameters tick off all then do relevant setup Step5 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 2 2 Host monitor Step1 enter into system configuration gt live configuration gt host monitor refer to Fig 4 8 LIVE five Kem Monitor Spot Mask Fig 4 8 live configuration host monitor Step2 select split mode 1x1 2x2 2x3 3x3 4x4 and channel Step3 dwell time the time interval for a certain dwell picture display switching to next dwell picture display o selected the split mode then setup current picture group Click button to setup the previous channel groups of dwell picture click button to set the latter channel groups of dwell picture Step5 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 30 Digital Video Recorder User Manual 4 2 3 SPOT Step1 enter into system configuration gt live configuration gt SPOT refer to Fig 4 9 LIVE Live Main Monitor Spot Mask Split Mode 1X1 4 Dwell Time Max Group 16 Current Group 1 Default Fig 4 9 live configuration SPOT Step2
23. 9 Digital Video Recorder User Manual PRESET Enable Name Preset Y preset001 preset002 preset003 preset004 preset005 preset006 presetD0 7 preset008 Fig 4 39 advance preset setting a in the preset set interface click Setting button a dialog will pop up as Fig 3 40 Yv preset001 Save Speed 6 Fig 3 40 preset set setting b user can control the dome rotates up up left down right down left left down right and up right and stop rotating adjust the rotate speed and the value of zoom focus and iris of the dome c select the serial number of the preset point set the preset name Click Save button to save the settings click al icon to hide the tool bar right key can remerge it click E icon to exit the current interface d in the preset interface click OK button to save the setting click Exit button to exit current interface 60 Digital Video Recorder User Manual Setting box will pop as Fig 4 41 CRUISE Step3 in the Advance interface click cruise button a dialog Name Cruise Cruise Cruise Cruise Cruise Cruise Cruise Cruise Setup Delete Clear All Fig 4 41 cruise set a click Add button to add cruise line in the list box max 8 cruise line can be added select a cruise line click Setup button a dialog box will pop up as Fig 4 42 CRUISE PRESET x No Name Preset Speed lime 256 5 256 2 5 256 3 5 256 4 5 Ab Ww S
24. DVR User Manual For H 264 4 8 16 channel digital video recorder All rights reserved Digital Video Recorder User Manual CAUTION e Please read this user manual carefully to ensure that you can use the device correctly and safely e We do not warrant all the content is correct The contents of this manual are subject to change without notice e This device should be operated only from the type of power source indicated on the marking label The voltage of the power must be verified before using If not in use for a long time pull out the plug from the socket e Do not install this device near any heat sources such as radiators heat registers stoves or other device that produce heat e Do not install this device near water Clean only with a dry cloth e Do not block any ventilation openings And ensure well ventilation around the machine e Do not power off the DVR at normal recording condition The correct operation to shut off DVR is to stop recording firstly and then select shut down button at the right of the menu bar to exit and finally to cut off the power e This machine is indoor using equipment Do not expose the machine in rain or moist environment In case any solid or liquid get into the machine s case please cut off the power supply immediately and ask for qualified technicians to check the machine before restart e Refer all servicing to qualified service personnel No any parts repaired by yourself without technical aid o
25. R sensor of the remote controller to the IR receiver that on the front panel press the number key 8 twice then input device ID Range from 0 65535 the default device ID is 0 with other digital number 0 9 after that press ENTER button to confirm Step2 User can check the device ID by enter into System configuration gt Basic configuration gt device ID User also can set other DVRs with the same device ID For more convenient to operate we don t recommend user to set the device ID too long Step3 Cancel controller to control DVR turn the IR sensor of the remote controller to the IR receiver that on the front panel press the number key 8 twice then input the device ID that needs to be cancelled from controlling press ENTER button to confirm After that the DVR will not be controlled by remote controller a i ae aa i i o Direction Button 2 5 Control with Mouse 2 5 1 Connect Mouse It supports USB mouse through the ports on the rear panel please refer to Fig 2 9 Remote Controller Notice If mouse is not detected or doesn t work check below steps 1 Make sure the mouse plugs in the USB mouse port not the USB port 18 Digital Video Recorder User Manual 2 Change a mouse to try 2 5 2 Use Mouse The structure of the main menu is shown in Fig 2 9 Remote Controller In live Double click left button on one camera to be full screen display Double click again to return to the previous screen display Click right butt
26. SA OG TOA OMe ceteris o racy asain wana es naa cheney ah eeeaN E eens gh acne tee ah eerste aye tcean andes 69 PAN GVO MYO AOU saps cect c sc pba zag a ao 70 APS olor A re errr rer ere errr 70 Wes VAI Us a ae etch at ae tae ca aan leat cathe Rei tia scat Rat eg a ats eal rec en Rae ata cet nace nae calc Roane ean 71 GA DISK MANAG ascites Pasty at Nagata cece ad cpg va tenner ig nana rca eee ncaa eee ea ee ee eee ae eee A 71 O O eRe tre REC Prey ae ct Ree rr Tat 72 Gk LOJO TENE POPE Pete a ee ee mercer O RL 72 ND DS accreted sta cect aaa cates ti aaa es ete ae lea dae te ta ee ea tare ane ett a ei cet amie aeeceniceen tt ace tes 72 7 Remote SUS lancia dd 73 TN O O O 73 Digital Video Recorder User Manual FMA OE AUN rot tada E docente decline 73 na h E A EEEE E E ET sas doteaqneeeauenaast E A shan dene EE E E A E A E E 75 7 2 The remote live preview interface as below ooooococonononoconcnnnnccnccnnnnonannnnnnnnn cnn nn RRA RARA RAR RR nn nn nnnnas 76 Ta Remote playback amp BACKUP asma A atau 81 Tee ROMO ACI AM E e E ENE o O UU o O poise oe mab itcion S 81 Teed io OD A PP eE e oe e 86 TA Remote SIEM CON QUO ia A A AA AAA O ieai 87 o aes secede dante etgcns E satan caeases tances ane etancamaseccae E AI 88 3 1 Br PRONES WAN WINGE spero oa dr oasis 88 Se By FRONS WINS IM anita anecdotario tata cacisaa 91 8 3 The operation method for iPhone Mobile clients ooocccccnnnnnonnnncncnnnnncccnnncnononcnncnnnnnnnnoncnno nan nan nana
27. Search 69 Digital Video Recorder User Manual 6 1 4 Network information In this interface user can check relevant parameters of network refer to Fig 6 4 NETWORK HTTP Port 0 Server Port O IP Address 000 000 000 000 Gateway 000 000 000 000 Net Mask 000 000 000 000 Preferred DNS Server 000 000 000 000 Alternate DNS Server 000 000 000 000 Networking Approach IP Status Unconnected Fig 6 4 network information 6 1 5 Online information In this interface user can check the details of the current connection of online users refer to Fig 6 5 ONLINE USER LIST User Name Status Fig 6 5 online information 70 Digital Video Recorder User Manual 6 1 6 Manual alarm In this interface user can check the relevant parameters of manual alarm refer to Fig 6 6 MANUAL ALARM Index Alarm Name IP Trigger 1 ALARM OUT 1 127 0 0 1 Y Alarm Clear Fig 6 6 manual alarm 6 1 7 Disk manager Step1 enter into disk manager interface refer to Fig 5 7 DISK MANAGER Type Size GB Free GB Status IDE 000 0 00 Normal Read Write v This 0 Refresh Format Fig 6 7 disk manager Note please format the hard disk before record If not being formatted it will show the status of the disk free space and total space show OM at the bottom of screen 71 Digital Video Recorder User Manual Step2 click Refresh button to refresh the disk information of the list box set the property of the
28. TA HDD to record for a longer time without any limitation BACKUP o Support USB 2 0 devices to backup o Support built in SATA DVD writer to backup Digital Video Recorder User Manual Support saving recorded files with AVI standard format to a remote computer through internet RECORD amp PLAYBACK Record modes Manual Schedule Motion detection and Sensor alarm recording o Support recycle after HDD full o Resolution frame rate and picture quality are adjustable o 128MB for every video file packaging 0 4 audio channels available 0 Two record search mode time search and event search o Support 4 8 16 screen playback simultaneously o Support deleting and locking the recorded files one by one o Support remote playback in Network Client through LAN or internet ALARM 0 1 channel alarm output and 4 8 16 channel alarm input available o Support schedule for motion detection and sensor alarm o Support pre recording and post recording o Support linked channels recording once motion or alarm triggered on certain channel o Support linked PTZ preset auto cruise and track of the corresponding channel PTZ CONTROL o Support various PTZ protocols o Support 128 PTZ presets and 8 auto cruise tracks o Support remote PTZ control through internet SECURITY 0 Customize user right log search system setup two way audio file management disk management remote login live view manual record 8 Digital Video Recorder User Manual pla
29. Zoom button Click Mutton near Zoom button to zoom in the locale picture of this camera Click Ml auton near Zoom button to zoom out the locale picture of this camera Focus button Click Ml button near Focus button to have long focus Click button near Focus button to have short focus Go to the Preset Ai oO Select and do auto cruise Track Click the right mouse on the live interface a pull down menu will appear as below Master Stream Sub stream All to Master Stream Full Screen Fig 7 6 right key sub menu Stream this DVR supports master stream and sub stream Master stream has higher frame rate max 25FPS PAL 30 FPS NTSC for every channel but it needs higher network bandwidth simultaneously second stream has low frame rate max 6FPS PAL 7FPS NTSC for every channel it requires low network bandwidth Therefore users can select the stream according to their bandwidth All to master sub stream set all channel to master stream or sub stream Enable audio enable or disenable audio Full stream the live preview picture will display with full screen the tool bar will be hided double click left mouse or click right mouse to return 80 7 3 Remote playback amp backup 7 3 1 Remote playback Digital Video Recorder User Manual Click button to enter into record playback interface refer to Fig 7 7 Select the record date and channels double click the file name in the record file list box user
30. ck Save button to save the setting 2 Enter into configuration interface of the router map the server port and IP address Click Save button to save the setting 8 Login IE browser and input registered domain name www tester123 88ip net connect to DVR client Note If the value changed user needs to add the port number when typing IP address in IE address blank i e set HTTP port to 82 IP address htip 192 168 0 25 user needs to input that address http 192 168 0 25 82 into IE browser Definitions and descriptions of network configuration Parameter Meg HTTP port The port number of accessing IE browser The default port is 80 Server port The port number of data The default port is 6036 IP address The IP address of the server Subnet mask The subnet mask of the server Gatewa The gateway of the server DDNS server The address of DDNS server PPPoE User name User name of broad band dial up Password Password of broad band dial up Website provided by dynamic domain name supplier The optional www dns2p net www meibu com www dyndns comandwww no ip com Password for log in the website of domain name supplier 4 6 2 Network stream Step1 enter into system configuration gt network configuration gt sub stream refer to Fig 4 33 54 Digital Video Recorder User Manual NETWORK Higher 512 Kbps v Higher Higher 512 Kbps v 512 Kbps v Higher Higher 512 Kbps v 512 Kbps Y Higher 512 Kbps Y Higher 51
31. ck off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 4 Schedule configuration Schedule configuration includes three sub menus schedule motion and alarm 4 4 1 Schedule The volume means the seven days of a week from Monday to Sunday the row means 24 hours of a day Click the grid to do relevant setup Blue means checked area gray means unchecked area Step1 enter into system configuration gt schedule configuration gt schedule refer to Fig 4 15 38 Digital Video Recorder User Manual SCHEDULE CENENE Motion Sensor Channel itis 4 8 12 20 0 Sunday Sana O o AAA Friday MRE AI Saturday Meta aaa Apply Settings to Copy Double click and setup schedule Default Fig 4 15 schedule configuration schedule Step2 select channel double click and a dialog box will pop up as Fig 4 16 user can edit week schedule SCHEDULE x Start Time End Time 23 59 02 01 23 59 Delete Fig 4 16 schedule week schedule 39 Digital Video Recorder User Manual Click add button to add a certain day schedule click delete button to delete the selected schedule Copy user can copy the specify schedule to other dates Click OK button to save the setting click Exit button to exit current interface 2 User can apply the schedule setting of certain
32. d Click to capture picture 96 Digital Video Recorder User Manual ESM F E 1 06 co Live View 01 07 2009 16 05 72 Step 8 On function interface click Image View to view the captured picture Click E or to switch to next or previous picture Click to delete the current picture E SM gt 51 07 o Image View 01 07 2009 16 05 41 4 4 gt Pl i Iphone help 97 Digital Video Recorder User Manual r 10 43 484 SuprrCara ogin Settings i Live Wii pr un Wirm des SymMem Setting Fo Image View Ly we Pict Pic2 Pic3 Live View After successfully installed SuperCam software Click on System Setting Pic 1 and then input Server IP address or Domain User name and password to log in Pic 2 If connected successfully it will go to Live View of CH1 as default Pic 3 please choose other desired channels from channel button underneath Meanwhile please note below functions oe Switch channels 2 Picture snap 3 PTZ control if server camera is PTZ Camera only pic4 PTZ faut wena buttons Explanations item Buttons Explanations ZOOM ae enn ith EAL boom in Aom out FOCUS G reas ED GIO Long Focus Short Focus Lighter Darker Gia e return to lve POCO IE 98 Digital Video Recorder User Manual Image View CAMIS 2000710044112 png CAIS 300503910044113 png CAM 2009090 23046 pn 9 CAM 20000309123947 png CAM 300900097 23540 pg CAN 3008009723548 png CAmMi_
33. d can do corresponding operations with the relevant right in system configuration Show time display time in live Show wizard tick off this item there will display an opening wizard with time zone and time setup information Max network uses set the max user amount of network connection VGA resolution the resolution of live display interface range from VGA800 600 VGA1024 768 VGA1280 1024and CVBS 26 Digital Video Recorder User Manual Note When switch between VGA and CVBS will change the menu output mode please connect to relevant monitor Language setup the menu language Note after changed the language and video output the device needs to login again 4 1 2 Time amp date Step1 enter into system configuration gt basic configuration gt time amp date refer to Fig 4 4 BASIC System Date amp Time DST Date Format MM DD YY Time Format 24 Hour Time Zone GMT Sync Time With NIP Server NTP Server time windows com System Date 05 04 f 2010 E25 System Time Default Fig 4 4 basic configuration time date Step2 set the date format time format time zone in this interface tick off sync time with NTP server to refresh NTP server date user also can adjust system date manually Step3 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 1 3 DST Step1 enter into system configuration gt bas
34. disk then click Apply button to save the setting Step3 checked a hard disk click Format button to star format Note all recorded files in the hard disk will be lost after formatted 6 1 8 Upgrade At present it only supports USB update Get the firmware from your vendor when there is a new firmware version and make sure it is corresponding with the DVR User can check the USB information in Disk manager 6 1 9 Logoff Click Log off icon a log off dialogue box will popup click OK button the device will log off If user wants to log in again click icon to enter into user name and password to relogin 6 1 10 Device Note At present the version is not support this function 72 Digital Video Recorder User Manual Remote Surveillance 7 1 Accessing DVR If making remote view the DVR must connect with LAN or internet Then enable network server in the unit Please refer to 4 6 Network Configuration This unit supports IE browser not any client software installed In addition it supports XP and Vista 7 1 1 On LAN Step1 Input IP address Subnet Gateway If using DHCP please enable DHCP in both the DVR and router Enter Menu Information Network and user can check the network configuration of DVR Step2 Enter Video to set network video parameters like resolution frame rate etc Step3 Open IE browser on a computer on the same LAN Input the IP address of the DVR in IE address blank and enter Step4 IE will download ActiveX au
35. e Click Config to enter into the below interface refer to Fig 7 13 E Save Default Brevity name EDE i E Dev vice y CS 1 video format o ms w password check Hua chent usar E Device language Tenga 1 ah i E VGA resolution iomon E Date format I n a wa PI Time fa TEER i ad E Time zona GAT amp USER Syne bimer with HTP serrer NTP server lic updatean tm A O Manual set mai sub menu DST enable Tr in DST of ose a a Fig 7 13 remote menu setup The sub menu lists and the options in every item are similar with those on the DVR Please refer to Chapter 3 Main Menu Setup Guide for more details Click save button to save above settings click default button will recover the original settings 87 Digital Video Recorder User Manual Mobile Surveillance This DVR supports mobile surveillance by Iphone Gphone or smart phones with WinCE and symbian OS At the same time it supports 3G network We tested Dopod D600 WM5 and Dopod S1 WM6 which work fine with the DVR It wants to make mobile surveillance need first enable network service on the DVR and refer to Chapter 4 6 Network configuration The below is the use instructions on mobile client end for two OS 8 1 By Phones with WinCE Step1 Firstly activate the network access on mobile phone and then run Internet Explorer Input the server s address and the con
36. e bottom case as below Fig 2 1 Connect HDD Step3 Screw the HDD as below Note For the convenience to install please connect the power and data cables firstly and then screw to fix 10 Digital Video Recorder User Manual Fig 2 2 Screw HDD 2 1 2 Install DVD Writer Notice 1 The writers must be the compatible devices we recommend Please refer to Appendix C Compatible Devices 2 This device is only for backup Step1 Unscrew and Open the top cover Step2 Connect the power and data cables Place the DVD writer onto the bottom case as below Fig 2 3 Connect the DVD Writer Step3 Screw the DVD writer as below 11 Digital Video Recorder User Manual Fig 2 4 Screw the Writer 2 2 Front Panel Instructions ja Notice The pictures are only for reference please make the object as the standard The Front Panel interface for is shown as Fig 2 5 ES Bl O U Wf ff tS YD B 9 YO 808 OW 1 Fig 2 5 Front Panel 12 Digital Video Recorder User Manual 1 Decrease the value in setup DAOP 2 Enter backup mode in live 2 Input number 10 and the above number together with other digital keys D 3 igital button Input digitals or choose camera 4 Enter button Confirm selection 0 SEARCH 7 Rewind key 1 Fast forward NN ia 2 Enter PTZ mode in live 1 Quit play mode 5 Direction Multi screen 1 Direction buttons Move cursor in setup or pan tilt PTZ button 2 Change screen display like
37. efault Fig 4 23 alarm configuration motion Step2 enable motion alarm set alarm hold time which means time interval between two adjacent detective motions If there is other motion detected during the interval period which is considered continuous movement otherwise it will be considered that those two adjacent detective motions are two different motion events Click Trigger button a dialog box will pop up Step3 the setup steps of motion trigger are familiar with alarm handling user can refer to Chapter 4 5 1 Sensor gt alarm handling for more details Step4 click Area button a dialog box will pop up as Fig 4 24 45 Digital Video Recorder User Manual Sensitivity 6 Fig 4 24 motion area Step5 in the Area interface user can drag slide bar to set the sensitivity value 1 8 the default value is 4 The higher the value is the higher sensitivity you get Due to the sensitivity is influenced by color and time A or night user can adjust its value according to the practical conditions click a E icon set the whole area as detection area click icon the set detection area will be cleared click A icon user can test whether the sensitivity value and motion area are suitable accordingly refer to following picture Click es icon to save the setting click ES icon exit current interface Sensitivity 6 Note when user drag mouse to set motion detection area they have to click icon to clear all set detection area
38. eo Recorder User Manual Step1 enter into system configuration gt alarm configuration gt sensor gt basic refer to Fig 4 19 pi SENSOR Basic Alarm Handling Schedule Enable Type Name Y SENSOR 1 SENSOR 2 Y Y SENSOR 3 Y SENSOR 4 Default Fig 4 19 alarm configuration sensor basic Step2 enable sensor alarm set the alarm type according to triggered alarm type Two option NO and NC Step3 user can setup all channels with same parameters tick off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 2 Alarm handling Step1 enter into system configuration gt alarm configuration gt sensor gt alarm handling refer to Fig 4 20 42 Digital Video Recorder User Manual SENSOR Basic Alarm Handling Schedule Trigger Trigger Trigger Trigger Fig 4 20 alarm configuration sensor alarm handling Step2 select hold time click Trigger button and a dialog box will pop up as Fig 4 21 TRIGGER Basic To Record To PRE Buzzer Full Screen Alarm To Alarm Out Fig 4 21 alarm handling trigger Steps tick off Buzzer there will be triggered buzzer alarm out Full screen alarm when triggered alarm there will pop up full screen alarm To alarm out tick off the channel there will be triggered alarm out in the designated channel Click OK button to save the setting
39. er User Manual data click those data select the record channels in areaG Step3 User can set the data playing time and display mode in the area as required Step4 Select certain item from the data information list box click play button to playback Step5 Click the relevant buttons in the interface user can do some operations such as FF pause change channel mode research etc refer to Fig 7 9 al e ey gt lt ha full screen play pause FR REW next frame volume Fig 7 9 Time search playback channel mode play mode play button progress bar 83 Digital Video Recorder User Manual By Event Search Step1 Enter into Search gt event search refer to Fig 7 10 Event list O a O O e OO IO O e i asas 00 01 07 201001 09 00 02 16 moen asias ooo amooo menui 1 2010 01 09 00 08 36 motion i f momoo 2030 01 09 00 10 58 moton 2010 01 09 00 17 09 Sun Mon Tue Wed Thu ji ES 1 2010 01 09 01 24 11 2010 01 09 02 46 11 3145 6 7 8l9 2010 01 09 00 54 27 manual Ms Me M7 Me annans Nm 2010 01 09 00 25 12 2010 01 09 00 25 54 motion 2010 01 09 00 26 57 2010 01 09 00 28 43 moti 2010 01 09 00 31 48 2010 01 09 00 32 30 motion Sensor Fig 7 10 event search interface Step2 click the highlight date and select record channels and then tick off the event type motion and sensor click search button Step3 the events will be display i
40. firstly and then make the operation 46 Digital Video Recorder User Manual Step6 user can setup all channels with same parameters tick off all then to do relevant setup Step7 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 2 Schedule Step1 enter into system configuration gt alarm configuration gt schedule refer to Fig 4 25 MOTION Motion Scania Channel Apply Settings to Copy Default Fig3 25 alarm configuration schedule Step2 the setup steps of alarm schedule are familiar with schedule user can refer to 4 4 1 Schedule for details 4 5 3 Video loss Step1 enter into system configuration gt alarm configuration gt video loss refer to Fig 4 26 47 Digital Video Recorder User Manual VIDEO LOSS Trigger Trigger Trigger Trigger Trigger Trigger Trigger Trigger Default Fig 4 26 alarm configuration video loss Step2 the setup steps of video loss trigger are familiar with alarm handling user can refer to Chapter 4 5 1 Sensor gt alarm handling for more details Step3 user can setup all channels with same parameters tick off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 5 4 Other alarm OTHER ALARM x Free Disk Alarm 128 MB v
41. g 5 4 backup configuration Step2 set the start amp end time select channels click Search button the searched data will be displayed in the data backup list box Step3 checked a data file or tick off All to select all data files click Backup button a dialog box will pop up as Fig 5 5 66 Digital Video Recorder User Manual BACKUP INFO Start Time 01272010 00 00 00 End Time 02042010 25 58 58 The Number Of Files 1 Size GB 128M Storage Type UsSA4devfsdb1 o Backup Player Save File Type Apply Cancel Fig 5 5 backup information Step4 in the backup information interface user can check the relevant information of backup files storage type save file type etc click Apply button to starting backup Note when the monitor resolution is VGA800 600 the file manager interface will appear a hide button click this button the whole interface can be expanded 67 Digital Video Recorder User Manual 6 Manage DVR 6 1 Check system information Check system information includes five submenus system event log network and online user 6 1 1 System information In this interface user can check the hardware version MCU version kernel version device ID etc refer to Fig 6 1 SYSTEM Hardware Version 1 0 MCU Version EXT Kernel Version 2 6 4 Firmware Version ENT Launch Date 01 25 2010 Device Name EDVR Device ID 255 Fig 6 1 system information 6 1 2 Event information In this inte
42. his button the whole interface can be expanded next segment of record 5 2 Event search Step1 enter into Search configuration gt event search refer to Fig 5 2 SEARCH x Time Search Event Search File Manager Search Type Start Time Motion Sensor Sensor Motion Sensor Motion Of0 Y Motion vi Sensor 01 28 2010 01 28 2010 01 28 2010 01 28 2010 01 28 2010 10 17 22 11 04 02 11 50 42 16 01 49 16 48 29 U 01 28 2010 10 17 22 01 28 2010 11 04 02 01 28 2010 11 50 42 01 28 2010 16 01 49 01 28 2010 16 48 29 2010 X Su Mo Tu 1 T 8 14 15 Al gA 28129 Fig 5 2 Search configuration event search We Th Fr Sa 2 g 16 23 30 64 Digital Video Recorder User Manual Step2 click Search button the searched event information will displayed in the event list box user can select date channel tick off Motion Sensor or All accordingly Step3 double check a certain record file to playback Note when the monitor resolution is VGA800 600 the event search interface will appear a hide button click this button the whole interface can be expanded 5 3 File manager Step1 enter into Search configuration gt file manager refer to Fig 5 3 SEARCH Time Search Event Search mie Manager Start Time End Time Status 01 28 2010 10 17 22 01 28 2010 10 17 22 Su Mo Tu 01 28 2010 11 04 02 01 28 2010 11 04 02 01 28 2010 11 50 42 01 28 2010 11 50 42 01 28 2010 16 01 49 0
43. ic configuration gt DST refer to Fig 4 5 27 Digital Video Recorder User Manual BASIC System Date amp Time DE Daylight Saving Time Time Offset Mode O Week From January The 1st Week Sunday January The ist Week Sunday DO 00 00 SI Default Fig 4 5 basic configuration DST Step2 in this interface enable daylight saving time time offset mode start amp end month week date etc Steps click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 2 Live configuration Live configuration includes four submenus live host monitor SPOT and mask 4 2 1 Live In this interface user can setup camera name adjust colors brightness hue saturation and contrast Step1 enter into system configuration gt live configuration gt live refer to Fig 4 6 28 Digital Video Recorder User Manual LIVE Mive Main Monitor Spot Mask CH Camera Name Show Name 1 CAMERAD1 Y Setting CAMERAD2 Setting CAMERAD3 f Setting CAMERAD4 Setting CAMERAD5 Setting CAMERAO6 Setting CAMERAD7 i Setting Setting Default Fig 4 6 live configuration gt live Step2 tick off camera name click setting button a window will pop up as Fig 4 7 Channel 11 Brightness Saturaton Contrast Default OK Fig 4 7 live color adjustment 29 Digital Video Recorder User Manual Step
44. is the color of schedule setting interface is blue 3 Buzzer Step1 enter into system configuration gt buzzer Step2 tick off Buzzer set buzzer alarm hold time 4 6 Network configuration Network configuration includes two submenus network and network stream 4 6 1 Network Step1 enter into system configuration gt network configuration gt network refer to Fig4 29 NETWORK Network Sub stream HTTP Port Server Port 6036 Obtain an IP address automatically Y IP Address 192 168 001 100 Subnet Mask 255 255 255 000 Gateway 192 168 001 001 Preferred DNS Server 000 000 000 000 Alternate DNS Server 000 000 000 000 PPPoE User Name Password Default Fig 4 29 network configuration network 50 Digital Video Recorder User Manual Step2 HTTP port the default value is 80 If the value changed user needs to add the port number when typing IP address in IE address blank i e set HTTP port to 82 IP address htip 192 168 0 25 user needs to input that address htip 192 168 0 25 82 into IE browser Server port communication port Step3 Tick off the Obtain IP address automatically the device will distribute IP address subnet mask gateway IP and DDNS service Step4 enable PPPOE user can directly connect the DVR to internet via ADSL then input the user name and password click TEST button to test the effectively of relevant information Step5 enable DDNS server user needs to input user name pa
45. isplayed on the top of search box No SM gt 11 29 o 94 Digital Video Recorder User Manual Step 3 Click SuperCam enter into introduce interface and click FREE it will change into INSTALL 2 gt El No SIM gt 11 29 SuperCam is a protessional mobile phone client SuperCam is a professional mobile phone chent software for digital video recorders and IP cameras software for digital video recorders and IP cameras in survedance models only in CCTV surveillance models only The software is for professional usage and The software is for professional usage and Step 4 Enter into Tunes Store password click OK will display below interface Note if it was the first time for user to operate please enter into user ID if there is no Store account user need to apply one iTunes Password supercam2009 aqmail com Cancel Step 5 Just be patient to download and install After installed SuperCam icon will display Click this icon a function interface will appear 95 e Live View gt rs System Setting gt To image View gt A il Step 6 Click System setting enter into login interface Enter into server s IP address or domain name user s ID and password Click Back to save No SM gt 11 43 il U Back Login Settings Server 210 21 229 141 04 Name Admin PassWord basadic Step 7 Click Live View the default Cam1 picture will be displaye
46. me in a DDNS server supported by the DVR or router Then add to the DVR or router Now this unit only supportswww dns2p com www 88lP net www meibu com www dyndns com andwww no ip com About the router please check in the router manual Step5 Open IE browser input IP address or dynamic domain name and enter If HTTP port is not 80 add the port number after IP address or domain name Step6 IE will download ActiveX automatically Then a window pops up and asks for user name and password Step7 Input name and password correctly and enter to view Notice If you cannot download and install ActiveX please refer to Appendix A FAQ Q7 2 Connect the DVR to internet directly Step1 Input IP address Subnet Gateway gotten from your ISP If using ADSL please input user name and password and click OK The DVR will connect the server and show connection succeeds Step2 The following steps are the same as STEP4 7 of the connection way above 19 Digital Video Recorder User Manual 2010 04 19 15 14 14 TAE aa gs caer E BE a 2 Status D i g Master Stream E Sub stream occ ocaa 19 10 11 12 13 14 15 16 fers aa Local Recording Status 12345678 J 10 11 12 13 14 15 16 A Ear da O Fig 7 2 Remote live preview interface 76 Digital Video Recorder User Manual Symbol and function Definitions Channel indicator Screen display mode Snapping pictur Playback Master sub
47. n nn nn rra nen none nana n RAR RR RR RR RRRnnnn nana nnnnnrrannnnennnnnnas 94 o nn aneetewead ime E snes onstetete sandals 100 Appendix B Calculate Recording Capacinet orense 105 Appendix Compatible Device Siisera nee eiee E E DEES O En A tad ad aa EOE RE Ea aE abrio 106 Appendix DCR DVR Specifications vans oras dsd iaa 107 Appendix E 20H DYR SC WC ANON S surtir E N EE E E E aa ai e aT a E a bbdd acen 108 Appendix F 16 CMDVR A e o In o ia iena ia e aii 109 Digital Video Recorder User Manual 1 Introduction 1 1 DVR Introduction This model DVR Digital Video Recorder is designed specially for CCTV system It adopts high performance video processing chips and embedded Linux system Meanwhile it utilizes many most advanced technologies such as standard H 264 with low bit rate Dual stream SATA interface VGA output mouse supported IE browser supported with full remote control mobile view by phones etc which ensure its powerful functions and high stability Due to these distinctive characteristics it is widely used in banks telecommunication transportation factories warehouse and irrigation and so on 1 2 Main Features COMPRESSION FORMAT Standard H 264 compression with low bit rate and better image quality LIVE SURVEILLANCE Support HD VGA output Support channel security by hiding live display Display the local record state and basic information Support USB to make full control RECORD MEDIA 0 Support two SA
48. n the event list box double click certain item to playback File Management Step1 Enter into Search file management refer to Fig 7 11 84 Digital Video Recorder User Manual File list G 2mel sae Eme 2010 01 09 00 01 07 2010 01 09 00 02 16 2010 01 09 00 10 58 2010 01 09 00 12 15 motion 2010 01 09 00 14 48 2010 01 09 00 15 43 motion 2010 01 09 00 15 45 2010 01 09 00 17 09 a i ee om z 2010 01 09 00 01 07 2010 01 09 00 01 53 motion lt 23 126 EE 2010 01 09 00 03 01 motion 2 aniones ooosor 2010 01 09 0002 moton amooo 0010332 20i0 01 0900 5427 manual a m ma E 2010 01 09 00 14 22 2010 01 09 00 15 03 motion mas Me Mz Me 2 2010 01 09 00 21 54 2010 01 09 00 22 35 motion Es Ev Mu Arz o 2 2010 01 09 002532 20100109 00 25 54 moton Fig 7 11 file management interface Lock select certain file item in the file list box click Lock button to lock this file that ca not be deleted or overlaid Unlock select a locked file click unlock button to unlock this file Delete select an unlock file click delete button to delete this file from file list 85 Digital Video Recorder User Manual 7 3 2 Remote backup Click Backup button to enter into backup interface refers to Fig 7 12 File list cH End te 2010 01 09 00 02 16 2010 01 09 00 03 28 2010 01 09 01 24 11 2010 01 09 02 46 11 2010 01 09 03 19 45 2010 01 09 17 39 52 2010 01 09 17 57 12 2010 01 09 00 01 07
49. n to save the setting click exit button to exit current interface Note if the rate value set is over high the maximum resources of the device the value will be adjusted automatically Definitions and descriptions of Record stream Parameter Meaning 3 3 3 3 3 3 3 3 Rate Range from 1 30 NTSC 1 25 PAL 35 Digital Video Recorder User Manual Support CIF and D1 Quality The quality of recorded images The higher the value is the clearer the recorded image is Six options lowest lower low medium higher and highest VBR and CBR Max bit stream Range from 64 Kbps 128 Kbps 256 Kbps 512 Kbps 768 Kbps 1Mbps 2 Mbps 4 3 3 Time Step1 enter into system configuration gt record configuration gt time refer to Fig 4 13 RECORD Enable Record Bitrate Time Recycle Record Stamp Pre alarm Record Time s Post alarm Record Time s Expire days O ac Never Never Never Never Never Never Never 1 2 3 4 5 6 7 8 Never 2 Never Fig 4 13 record configuration time Pre alarm record time the record time before event happen i e record time before motion detection or sensor alarm is triggered Post alarm record set the post recording time after the alarm is finished five options 10s 15s 20s 30s and 60s 36 Digital Video Recorder User Manual Expire time the hold time of saved records If the set date is overdue the record files will be deleted automatically Step2 use
50. napped in live view System setting Login setting and Alarm setting Help function indication and help El Pocket Camera p ee 0 live View Image View System Setting Help f i a D cancel Step7 Click System setting gt Login Setting to enter login interface se Login Setting HttpPort 1110 Username admin Password mnt nak Winsock Back 92 Digital Video Recorder User Manual Steps Input the server s address ID and password respectively Then save Notice About Access point there may be different access points in different countries or from service providers Step9 Enter Live View it will connect the server and display pictures Live View Options Back Notice User name and password here are the same with that used on the DVR The default is admin and 123456 Step10 In Live View users can do snapshot change channels and control PTZ Sig Live View CAMI SnapShot FullScreen Direction Camera Focus Zoom Hide Iris Select Cancel 93 Digital Video Recorder User Manual 8 3 The operation method for iPhone mobile clients At present the software only supports version of iPhone os2 2 and above if phone firmware lower than this version please upgrade it Below is the operation method for iPhone mobile clients Step1 Enter into App Store function of iPhone Step 2 Enable search Q function to search SuperCam the required programs will be d
51. nection is built up shown as below Internet E g Yil 10 35 Xx http 192 168 3 135 PcamEn htm back Refresh gt gt gt gt Update PCam v1 1 2 624 A Tip You will see a message appear like the folowing after you click the Update URL please click the Yes button Download Download PCam PPC2003_4RM CAB to the My Document folder in Main Memory 4 open file after download View Tools FL Step2 Click on the software name A dialog box pops up 88 Digital Video Recorder User Manual Internet Es Y 2 Til 10 36 http 192 168 3 135 PcamEn htm Download Download the 949 KB file PCam PPC2003_ARM CAB to the My Documents Folder in Main Memory Open File after download Download PCam PPC2003_A4RM CAB to the My Document folder in Main Memory 4 open file after download View Tools Y 3 A sv Step3 Click Yes to start downloading and installing Step4 PCam will be opened automatically after installed Pocket Camera Y Y lt 4 10 39 x Server 192 168 3 35 Go User Password sees Digital Video Recorder User Manual Step5 Input the server s address ID and password respectively in the columns of Server server It will show the picture if access successfully Pocket Camera Til 10 44 x Server 192 168 3 35 v STOP Channel ia User Password wa de ES gt 0
52. nnection problem Please check the power and data cables c The HDD is damaged Change a new one 100 Digital Video Recorder User Manual Q5 Cannot record a Don t format HDD Please format it manually first b Don t enable record function or incorrect setup Please refer to Chapter 5 Record search amp playback and backup c HDD is full and not enables recycle function Please refer to 4 3 Record configuration Chang a new HDD or enable recycle d The HDD is damaged Change a new one Q6 Cannot use mouse a wait 1 2 minutes after mouse connected b Not detected Plug unplug several times c The mouse is incompatible Please change a mouse Q7 Cannot download ActiveX control a IE browser blocks activeX Please do setup following below Open IE browser Click Tools Internet Options A about blank Microsoft Internet Explorer File Edit View Favorites Mc Help Mail and News j Synchronize windows Update Show Related Links Internet Options Y select Security Custom Level Refer to Fig 7 1 101 Digital Video Recorder User Manual Enable all the sub options under ActiveX controls and plug ins refer to Fig 7 2 Then click ok to finish setup b Other plug ins or anti virus block activeX Please uninstall or close them Internet Options General Security Privacy Content Connections Programs Advanced Sato Select a Web content zone to specify its
53. o resort default setting click apply button to save the setting click exit button to exit current interface 62 Digital Video Recorder User Manual Y Record search amp playback and backup Search configuration includes three submenus time search event search and file manager 5 1 Time search Step1 enter into Search configuration gt time search refer to Fig 5 1 SEARCH Time Search Event Search File Manager x Search AZ ao 04 06 7 2010 15 45 36 P 1 8 CAMOTES Heine l Moo 29 Fig 5 1 Search configuration time search Step2 select channel screen display mode the highlight date in the calendar means have record data 2 g 16 23 30 Sa 3 10 17 24 Step3 select a date press Search button click the time grid to set the play start time or input play record time manually The selected time match the blue grid Note the vertical column means hours horizontal column means channels Step4 click Play gt button to playback record click the relevant buttons on the screen to do operation 63 Digital Video Recorder User Manual scree play pause frame stop FF ASE rewind mode hidetoolbar volume exit ii m K ME HEN E T EE mun 0 2772010 09 30 00 09 48 04 09 59 59 last segment of record play process Playback buttons Note when the monitor resolution is VGA800 600 the time search interface will appear a hide button click t
54. ogin User can login and logout the DVR system User cannot do any other operations except changing the multi screen display once logout LOGIN Liser Mame Password Login Cancel Fig 3 1 Login Notice the default user name and password is admin and 123456 t The concrete operation steps for change password add or delete user please refer to Fig 3 7 User management configuration for more details 21 Digital Video Recorder User Manual 3 3 Live preview Fig 3 2 live preview interface The explanation of symbol in the live preview interface symbol symbol Manual record or time record Red Alarm record Motion detection record 3 3 1 Live playback Click oa ton to playback the record Refer to Figure3 3 User can do concrete operation by click the buttons on screen 22 Digital Video Recorder User Manual Camera Name last segment of record play process next segment of record Fig 3 3 live playback Digital Video Recorder User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel the control bar will display on the bottom of the screen refer to Fig 4 1 CTE ICI ES playback function menu screen mode dwellwvolumn PI record hide toolbar Fig 4 1 main menu toolbar Click the BB icon beside the screen display mode a channel select dialog will appear as below 1 wi vi iwd E 6 elf lt B w Y 10 11 12 13 14 15 16 v IX
55. on to show the control bar at the bottom of the screen as Fig 2 9 Remote Controller Here are all control and setup Click right mouse again to hide the control bar In setup Click left button to enter Click right button to cancel setup or return to the previous If want to input the value move cursor to the blank and click An input window will appear as Fig2 10 It supports digitals letters and symbols input Fig 2 10 Digital Numbers and Letters Input Window Users can change some value by the wheel such as time Move cursor onto the value and roll the wheel when the value blinks It supports mouse drag l e Set motion detection area click customized hold left button and drag to set motion detection area Set schedule hold left button and drag to set schedule time In playback Click left button to choose the options Click right button to return to live mode In backup Click left button to choose the options Click right button to return to previous picture In PTZ control Click left button to choose the buttons to control the PTZ Click right button to return to live t Notice Mouse is the default tool in all the operation below unless Exceptional indication 19 Digital Video Recorder User Manual 3 Basic Function Instruction 3 1 Power On Off Before you power on the unit please make sure all the connection is good 3 1 1 Power on Step1 connect with the source power switch on the power button near the power port in the rear
56. panel Step2 the device will be loaded and the power indicator will display blue Step3 before start a WIZZARD dialogue box will be pop up refer to below picture and show some information about time zone and time setup WIZZARD Set time zone and time Welcome Please set time zone and time first Or do it later by click skip or finish Finish setting following the steps Step 1 choose time zone GMT y Step 2 set date and time ICI 25 II TS Step 3 click Modify to activate the change Show Wizzard Next Time Y f Next After the device power on if there is no menu or only has live image display user can long press ESC button to switch t Notice this serial device can only display menu on VGA monitor or BNC monitor at one time if there is live image display without menu display please check up whether other device has menu display firstly or long press ESC key to wait for login dialog box to appear 20 Digital Video Recorder User Manual 3 1 2 Power off User can power off the device by using remote controller keyboard and mouse By remote controller Step1 press Power button the Shut down window will appear click OK the unit will power off after a while Step2 disconnect the power By keyboard and mouse T Step1 enter into Menu then select System Shut Down icon the Shut down window will appear Step2 click OK the unit will power off after a while Step3 disconnect the power 3 2 L
57. ps for enabling total 16 channels He wants the unit to record continuously in a month Below is the calculation Total Recoding capacity 56 4 mb h X 24 hours day X30 days X16 channels 649728 MB z650 GB Therefore customers just install two SATA HDDs with 320GB it can almost record for one month 105 Digital Video Recorder User Manual Appendix C Compatible Devices 1 Compatible USB drive after test SSK 512MB 1G 2GB Kingston 4GB Smatter vider SanDisk Tab C 1 Compatible USB drive 2 Compatible SATA CD DVD writers after test Brand Model TECLAST GH22NP20 TL 22XD BENQ DW2205S 0K4 LITEON DH 20A6S01C LITEON DH 20A4P02C SAMSUNG TS H653B Tab C 1 Compatible CD DVD writers 106 Digital Video Recorder User Manual Appendix D 4 CH Specifications 1280 1024 1024 768 800 600 352 288 704 576 PAL 352 240 704 480 NTSC 100FPS PAL _120FPS NTSC 100FPS PAL _120FPS NTSC Audio input 8dB 22k RCA X4 Audio output 8Db 92dB RCA X1 Alarm input NO or NC 4CH Alarm output 1CH Record Mode Manual Sensor Timer Motion detection Simplex Duplex Triplex Network Interface RJ45 LAN INTERNET PTZ control YES Communication interface RS485 USB2 0 x 2 one for backup another for USB mouse Disk info SATA x 1 DVD RW x 1 or SATA x 2 Remote controller Power supply 12V4A 107 Digital Video Recorder User Manual Appendix E 8 CH Specifications Video output Composite 1 0V p p
58. put user name password select user type normal and advance input the MAC address of the PC click OK button this user will be added into the user list box click Exit button to exit the current interface Note when the default value of binding PC MAC address is 0 the user is not bind with the specify computer the the user can log in DVR on the binding computer after set the specific binding MAC address 2 Authority Step1 enter into Add user gt authority refer to Fig 4 36 ADD USER General Authority Log View System Setup Shut Down Audio Talk Dala Manage Disk Manage Remote Log on Live View zi Record a sel E Playback r F 1 Backup T l PTZ Control a 1 Remote View Fig 4 36 add user authority Step2 In the authority interface assign the definite operation right for that user Step3 in the user management interface click Setup button to modify user name user type and binding PC MAC address Step4 select the user that user wants to delete in the user list box then click Delete button to delete this user Step5 click Change password button to modify the password click Exit button to exit the current interface 97 Digital Video Recorder User Manual 4 8 P T Z configuration P T Z configuration includes two submenus serial port and advance Serial port Step1 enter into system configuration gt P T Z configuration gt serial port refer to Fig 4 37 PAZ Serial Port
59. r approval e This manual is suitable for 4 8 16 channel digital video recorders All examples and pictures used in the manual are from 16 channel DVR 1 Digital Video Recorder User Manual Table of Contents a O AN 7 A tai oe sees E T E EE wi aSp cies sh E E E T E E E koa E sheen Aarne 7 Ase Main Feat re a 7 Hardware Tostadas 10 2 SAMA Drivers ass 10 A ne N E cla gegevens a haa eraver saan hoaste Mynnatee hs a Lah ee eet ages baa ataar 10 2 1 2 Ao E e A e 0 11 2 2 Front Panel ASUS tectanlen sen asieh pastas tthe ah ned ots 226 ce A lid aceite sd teal ach Gee Une ah heat caine cents else a a 12 220 Rear Ranel INSIMUICUOMS a A s 13 2 Rear Panellnterlace sieni Ge leet Sagal wnat rte ced A a e th wate cot atidakiedg O ey ease tea ieee ues 13 2 4 REMOS Controle ias E AIR SA asaas dance EEA E EE Saena 17 2 ORTO WI MOUSE a datado lia 18 25 EAN MU e Meee 18 A eee cedar eae encanta Rose eat ogee as eee ey ant eee ene nh aac ee eet sce nea 19 coi ao a HOM 252 x sevaecs es E A oh oie E 20 SP OWEN Ol PP Qe 20 IHT ra hf OM O RO ee ree Pec o eee ee ee eee ee 20 aa PP 21 A A O freee errr eee cn eT ere ae re 21 EN did 22 A O f A702 A eee Re A eee REN Pe ORE er eee eT eC eee ree nee eer ore A 22 4 Digital Video Recorder User Manual Main ICME SOTHO gudo sence A O ue canmomepecnnase 24 Ael BaSe COMIC ANON Gras nei atch a ina 25 na Ma oy SU IN O pees 25 4 t2 lime OAS si acca eticat aceasta hive yd Viet E E cian 27 O A OO 27
60. r key after filling in the textbox 92 Digital Video Recorder User Manual Register Forget Password Fig 4 31 Log in 3 Domain Setup Step 1 Click Domain Management on the left to set the domain Fig 4 32 Domain setup Step 2 Input the domain in the textbox For example you set DVR as the domain Step 3 Click Submit button the system will pop up a dialog box to show that the domain is added successfully Note Time of probationary period is one month If user wants to use it continuatively after one month please click Buy Now in the right of homepage to pay for it 2 Setup in the DVR 1 DOMAIN Domain is set in 1 1 Apply the Domain Name According to the example above the domain is DVR www 88sIP net 2 USER ID Username of registered which is set in 1 Register in the Web According to the example above user ID is abc 3 PASSWORD Password is set in 1 Register in the Web According to the example above password is 123456 Note If the connection fails press the INFO button the system will display DDNS NONE Then you need to check network and information above and try again 3 Application Connect DVR to the Network Client Enter into System configuration gt Network configuration tick off DDNS select www 88ip net at the DDNS Sever pull down list box input 53 Digital Video Recorder User Manual server name user name and password Cli
61. r can setup all channels with same parameters tick off all then to do relevant setup Steps click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 3 4 Recycle record Step1 enter into system configuration gt record configuration gt recycle record Step2 tick off recycle record the recycle record function will enable it will cover the earlier recorded files and keep recoding when HDD is full if disenable this function it will stop recording when HDD is full Step3 click default button to resort default setting click apply button to save the setting click exit button to exit current interface 4 3 5 Stamp Stamp User can overlap the channel name and time stamp on video Step1 enter into system configuration gt record configuration gt stamp refer to Fig 4 14 RECORD Enable Record Bitrate Time Recycle Record Senne Camera Name Time Stamp Position Y Set v Set Set Set Set Set Set Default Fig 4 14 record configuration stamp 37 Digital Video Recorder User Manual Step2 tick off camera name time stamp click Set button user can use cursor to drag the camera name and time stamp in random positions refer to below Figures 04 29 2010 16 04 40 CAMERAO2 04 29 2010 16 04 40 CAMERAD2 Before drag after drag Step3 user can setup all channels with same parameters ti
62. r of the Remote Controller Step2 Place batteries Please take care the poles and Step3 Replace the battery cover Notice Frequently defect checking as following 1 Check batteries poles 2 Check the remaining charge in the batteries 3 Check IR controller sensor is mask If it still doesn t work Please change a new remote controller to try or contact your dealers The interface of remote controller is shown in Fig2 9 Remote Controller SEARCH E e E l SEQ BACKUP TATZ A Fig 2 9 Remote Controller Power Button Soft switch off to stop firmware running Do it before power off INFOR Button Get information about the DVR like firmware version HDD information 17 Digital Video Recorder User Manual Button To increase or decrease the value in setup Playback Control Button To control playback Fast forward rewind stop single frame play AUDIO Button To enable audio output in live mode Auto Dwell Button To enter auto dwell mode BACKUP Button To enter backup mode To control PTZ camera Bl ere TR Move camera ZOOM FOCUS IRIS SPEED control Operation processes with remote controller to control multi DVR The device ID of the DVR is 0 When use of remote controller to control single DVR it s not necessarily to reset the device ID user can do operation directly when control multiple DVR with remote controller please refer to below steps Step1 Activate remote controller to control DVR enable DVR turn the I
63. rface user can check record events according to set date refer to Fig 6 2 68 EVENT LIST Digital Video Recorder User Manual CH Type Start Time Sensor Motion Video Loss Motion Sensor Motion vi Motion 6 1 3 Log information In this interface user can check relevant log information according to set date refer to Fig 6 3 LOG LIST 01 28 2010 01 28 2010 01 28 2010 01 28 2010 01 28 2010 End Time 122 01 28 201 11 04 02 01 28 201 11 50 42 01 28 201 16 01 49 01 28 201 16 48 29 01 28 201 Y Video Loss 0 10 17 22 O 11 04 02 O 11 50 42 O 16 01 49 O 16 48 29 Fig 6 2 event information Start Time IO 25 End Time i Search User Harme Time Type lime Search Time Time Searc Logan Stop P T Operation Start P T Z Operation Stop ATZ Operation Operate P T Operate P T Z Start P T 2 Operation Logon Ww adrir admin admin admin adimi admin admin admin admin admin admin wiwat AI 0542010 14 0514 2010 Dsi 05042010 IA 11054 05042010 11 51 54 05042070 11 40 35 051042010 11 45 00 05 0412010 DAA 010 08 54 04 127 000 000 001 127 000 000 001 127 000 000 001 12 fC CCI C0 7 iar 000 000 001 127 000 000 001 127 000 000 0001 124 000 0040 007 127 000 000 001 127 000 000 001 127 000 000 001 Fig 6 3 log information Start Time End Time 2 Operation v Setup Playback Backup Search Check Information Error a
64. single 4 9 and 16 screens STOP ESC 2 Exit the current interface or status PLAY Enter play interface To connect external USB devices like USB flash USB HDD for backup or 11 USB port update firmware 1 Increase the value in setup AMO TP nT n 2 Enter menu from live view RECORD Record manually Working indicators of power and networks etc IR RECEIVER For remote controller Tab 2 1 Definitions of Front Panel Buttons 2 3 Rear Panel Instructions 2 3 1 Rear Panel Interface The rear Panel interface for 4 ch is shown as Fig 2 6 Digital Video Recorder User Manual MO O E Fig 2 6 Rear Panel for 4 ch Connect to monitor Connect to monitor as an AUX output channel by channel Only video display 2 Spot out no menu show 6 ALARMIN Connecttoexternalsensort 4 8 VGAport VGA output connect to monitor 9 O Network port Tab 2 2 Definitions of Front Panel Buttons The rear Panel interface for 8 ch is shown as Fig 2 7 14 Digital Video Recorder User Manual ALA l A A l d 1 Y j E i o j 9 4 i 5 i ioc SPOT OUT a S E j 5 ea mE 1 i e ELL Iie et k 4 AU no H 5 VEA AN LIE ion TETE Fig 2 7 Rear Panel for 8 ch Connect to monitor Connect to monitor as an AUX output channel by channel Only video display 2 Spot out no menu show 7 5V and GND 14 Audioin 4 CH Audio input Tab 2 3 Definitions of Front Panel Buttons E y 8 9 0 1 2 3 4
65. ssword and host domain name of the registered website click TEST to test the effectively of relevant information STEP6 click default button to resort default setting click apply button to save the setting click exit button to exit current interface Note The domain name server that selected by user is a banding domain name of DVR User should logon the website which provided by the server supplier to register a user name and password firstly and then apply a domain name on line for the server After the successful apply user can access the server from the IE client by inputting that domain name 1 Apply the Domain Name Take 88IP for example 1 Register in the Web Step 1 Fill in the blank of IE address with www dns2p com Step 2 Click to enter the website Step 3 Click New User in the right of homepage to register For example User ID is abc and password is 123456 The register dialog display as below 91 Digital Video Recorder User Manual Register User ID abc t Password dd Confirm Password le city gt Country Philippines yt Company Name E mail Address Code Loo i Tel 2 register reset Fig 4 30 Register dialog box 2 Login Step 1 Return to homepage after registering successfully Step 2 Click Account Manager on the right of homepage to login Step 3 Input the username and password with the information that you have registered Step 4 Click Ente
66. tal Video Recorder User Manual RECORD Enable Record Bitrate Time Recycle Record Stamp Record Audio Redundancy S S S ESSE Default Fig 4 11 record configuration enable Step2 tick off record audio and record time Step3 user can setup all channels with same parameters tick off all then to do relevant setup Step4 click default button to resort default setting click apply button to save the setting click exit button to exit current interface Definitions and descriptions of Record Parameter Meaning O O o yO Record switch of every channels Audio Enable live record audio 34 Digital Video Recorder User Manual 4 3 2 Record stream Step1 enter into system configuration gt record configuration gt record bit rate refer to Fig 4 12 RECORD Enable Record Bitrate Time Recycle Record Stamp v Higher vw 1 Mbps v Higher v 1 Mbps J v Higher v 1 Mbps y Higher vil 1 Mbps v Higher v i 1 Mbps 1 Mbps 1 Mbps m bas 4 v Higher v Higher Y vw 4 Higher vil 1 Mbps O 4 y Higher v 1 Mbps f Default Fig 4 12 record configuration record bit rate Step2 setup rate resolution quality encode and max bit stream Step3 user can setup all channels with same parameters tick off All then to do relevant setup Step4 click default button to resort default setting click apply butto
67. tomatically Then a window pops up and asks for user name and password Step5 Input name and password correctly and enter It will show the picture as below 73 Management Information 2010 04 19 15 14 14 Status a g Master Stream E Sub stream 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Local Recording Status oe 422 4 SS Pe 3 9 10 11 12 13 14 15 16 rh a 3 E Prom oe Tame 0000 0000 0000 0000 mm sa m 0 E Jo 6 2 gt Fig 7 1 View with IE browser Notice lf HTTP port is not 80 other number instead need add the port number after IP address For example set HTTP port as 82 need input IP address like 192 168 0 25 82 User name and password here are the same with that used on the DVR The default is admin and 123456 74 Digital Video Recorder User Manual 7 1 2 On WAN There are two ways that the DVR is connected to internet 1 Connect the DVR to internet through a router or virtual server Step1 Input IP address Subnet Gateway If using DHCP please enable DHCP in both the DVR and router Step2 Enter Video to set network video parameters like resolution frame rate etc Step3 Forward IP address and port number in Virtual Server setup of the router or virtual server Close firewall Notice Forwarding block may be different in different routers and server please check your router manual If users want to utilize dynamic domain name need apply for a domain na
68. yback PTZ control and remote live view o Support 1 administrator and 15 users o Support event log recording and checking events unlimited NETWORK Support TCP IP DHCP PPPoE DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream Network stream is adjustable independently to fit the network bandwidth and environment Support picture snap and color adjustment in remote live Support remote time and event search and channel playback with picture snap Support remote PTZ control with preset and auto cruise Support remote full menu setup changing all the DVR parameters remotely Support mobile surveillance by smart phones symbian WinCE Iphone or Gphone 3G network available Support CMS to manage multi devices on internet Digital Video Recorder User Manual 2 Hardware Installation Notice Check the unit and the accessories after getting the DVR Please disconnect the power before being connected to other devices Don t hot plug in out 2 1 Install Hard Drive amp DVD Writer 2 1 1 Install Hard Drive Notice 1 this series support two SATA hard drives Please use the hard drive the manufacturers recommend specially for security and safe field 2 Please calculate HDD capacity according to the recording setting Please refer to Appendix B Calculate Recording Capacity Step1 Unscrew and Open the top cover Step2 Connect the power and data cables Place the HDD onto th

DVR User Manual - Columbus Home Security

Contents

Download Pdf Manuals

Related Search

Related Contents