Home

User Manual AS193i-BK

1. 89 89 CR gt 10 31 5 kHz to 81 1 kHz 56 Hz to 76 Hz 720 x 400 VGA text 640 x 480 at 60 Hz to 75 Hz 800 x 600 at 56 Hz to 75 Hz 832 x 624 at 75 Hz 1024 x 768 at 60 Hz to 75 Hz 1152 x 864 at 75 Hz 1152 x 870 at 75 Hz 1280 x 960 at 60 Hz to 75 Hz 1280 x 1024 at 60 Hz to 75 HZ 374 78 mm 299 827 mm 100 240 V 50 60 Hz 0 45 0 25A 18 W 14W Notes Active matrix thin film transistor TFT liquid crystal display LCD 0 2928 mm dot pitch 250 cd m white luminance 1000 1 contrast ratio typical 0 7 Vp p 75 ohms Separate sync TTL level Positive Negative DVI HDCP Depends on display card used Automatically Automatically Some systems may not support all modes listed Recommended resolution is 60 Hz for optimal display performance 408 0 mm W x 386 4 mm H x 213 9 mm D 16 1 inches W x 15 2 inches H x 8 4 inches D 3 9 kg 8 6 Ibs 5 C to 35 C 41 F to 95 F 20 to 80 O to 2 000 m 0 to 6 562 Feet 10 C to 60 C 14 F to 140 F 10 to 85 O to 12 192 m 0 to 40 000 Feet 1 Interpolated Resolutions When resolutions are shown that are lower than the pixel count of the LCD module text may appear different This is normal and necessary for all current flat panel technologies when displaying non native resolutions full screen In flat panel technologies each dot on the screen is actually one pixel so to expand resolutions to full screen an interpolat
2. Austria Benelux Denmark France Germany Italy Norway Spain Sweden U K All other brands and product names are trademarks or registered trademarks of their respective owners ENERGY STAR s a U S registered trademark As an Enercy Star Partner NEC Display Solutions of America Inc has determined that this product meets the ENERGY STAR guidelines for energy efficiency The ENercy Star emblem does not represent EPA endorsement of any product or service ENERGY STAR English 1 Registration Information Canadian Department of Communications Compliance Statement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil numerique de la classe B est conforme a la norme NMB 003 du Canada C UL Bears the C UL Mark and is in compliance with Canadian Safety Regulations according to CAN CSA C22 2 No 60950 1 FCC Information 1 Use the attached specified cables with the AccuSync AS193i L199ND color monitor so as not to interfere with radio and television reception 1 The power supply cord you use must have been approved by and comply with the safety standards of U S A and meet the following condition Power supply cord Non shield type 3 conductor Plug shape n U S A 2 Please use the supplied shielded video signal cable Use of other cables and adapters may cause interference with radio and television reception 2 This equipment has been tested and found to comply with the limits for a C
3. face down on a non abrasive surface Figure R 1 2 Using your thumb press the button to unlock 3 With the button pressed in pull off the Base Stand ES d lt IU Connect a Flexible Arm This LCD monitor is designed for use with a flexible arm Please use screws 4pcs as shown in the picture when installing To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor The LCD monitor shall only be used with an approved arm e g GS mark NOTE To meet the safety requirements the monitor must be mounted to an arm that supports the weight of the monitor and be UL certified See page 11 for details Remove the base stand before mounting 4 x 12 mm with lock washer and flat washer Thickness of Bracket Arm 2 0 3 2 mm Tighten all screws 100 mm Sy om Specifications Fun mm 4 SCREWS M4 MAX depth 10mm O N If use other screw X check depth of hole AAN 00 Weight of LCD assembly AS193i 3 4 kg MAX English 7 Controls OSD On Screen Display control buttons on the front of the monitor function as follows 1 Basic function at pressing each key oom Oo o Not displaying on Displays OSD Shortcut to Brightness Shortcut to Contrast Selects input signal screen Displaying on screen Displays OSD menu and M
4. long time These types of fluids and fabrics can cause the paint to deteriorate crack or peel For more detailed information on setting up a healthy work environment write to the American National Standard for Human Factors Engineering of Computer Workstations ANSI HFES 100 2007 The Human Factors Society Inc P O Box 1369 Santa Monica California 90406 English 4 Contents Your new NEC AccuSync LCD monitor box should contain the following e AccuSync LCD monitor with tilt base e Power Cord e Video Signal Cable 15 pin mini D SUB male to 15 pin mini D SUB male e Setup Manual e Base Stand e Cable Holder Cable Holder Setup Manual oo E q 4 Setup Manual Power Cord Video Signal Cable Base Stand AccuSync LCD monitor Base stand not connected Remember to save your original box and packing material to transport or ship the monitor 1 Type of power cord included will depend on where the LCD monitor is to be shipped Quick Start To attach the Base Stand to the LCD Stand 1 Attach the Base Stand to the Stand The locking tabs on the Base Stand should fit into the hole on the Stand Figure S 1 To attach the AccuSync LCD monitor to your system follow these instructions 1 Turn off the power to your computer 2 For the PC or MAC with DVI digital output Connect the DVI signal cable not included to the connector of the display card in your system Figure A 1 Tighten all screws For the PC with Anal
5. of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation U S Responsible Party NEC Display Solutions of America Inc Address 500 Park Blvd Suite 1100 ltasca Illinois 60143 Tel No 630 467 3000 Type of Product Display Monitor Equipment Classification Class B Peripheral Models AccuSync AS193i L195GY FC We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules English 2 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE ACCUSYNC LCD COLOR MONITOR DO NOT OPEN THE MONITOR There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks Refer all servicing to qualified service personnel Do not spill any liquids into the cabinet or use your monitor near water Do not insert objects of any kind into the cabinet slots as they may touch dangerous voltage points which can be harmful or fatal or may cause electric shock fire or equipment failure Do not place any heavy objects on the power cord Damage to the cord may cause shock or fire Do not place this product on a sloping or unstable cart stand or table as the monitor may f
6. 5
7. 6 No touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings For further adjustments use the following OSD controls e Auto Adjust Contrast e Auto Adjust Refer to the Controls section of this User s Manual for a full description of these OSD controls NOTE If you have any problem please refer to the Troubleshooting section of this LLY User s Manual Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired Figure TS 1 Remove Monitor Stand for Mounting To prepare the monitor for alternative mounting purposes Figure TS 1 1 Disconnect all cables 2 Place monitor face down on a non abrasive surface Figure R 1 3 Remove the 4 screws connecting the monitor to the stand and remove the stand as indicated Figure R 2 The monitor is now ready for mounting in an alternative manner 4 Connect the AC cord and signal cable to the back of the monitor Figure R 3 5 Reverse this process to re attach stand NOTE Use only VESA compatible alternative mounting method NOTE Handle with care when removing monitor stand English 6 ee CZ Se gt Nw SQ ie o A T Y Non abrasive surface Figure R 1 Figure R 2 Figure R 3 Remove the Base Stand Locking tabs NOTE Always remove the Base Stand when shipping the LCD 1 Place monitor
8. CARBON USAGE Displays the estimated carbon usages information in kg This is the arithmetic estimation not actual measurement value MONITOR INFO Indicates the model and serial numbers of your monitor OSD Warning OSD Warning menus disappear with SELECT button NO SIGNAL This function gives a warning when there is no signal present After power is turned on or when there is a change of input signal or video is inactive the No Signal window will appear OUT OF RANGE This function gives a recommendation of the optimized resolution and refresh rate After the power is turned on or there is a change of input signal or the video signal doesn t have proper timing the Out Of Range menu will appear English 10 Specifications Monitor Specifications LCD Module Diagonal Viewable Image Size Native Resolution Pixel Count Input Signal 15pin Mini D sub DVI D Display Colors Viewing Angle Left Right Up Down Synchronization Range Horizontal Vertical Resolutions Supported Landscape Horizontal Vertical Active Display Area Power Supply Current Rating Power Consumption Maximun Operation Normal Operation Dimensions Landscape Weight Environmental Considerations Operating Temperature Humidity Altitude Storage Temperature Humidity Altitude AccuSync AS193i Monitor 48 0 cm 19 inches 48 0 cm 19 inches 1280 x 1024 Analog RGB sync Digital RGB 16 777 216 89 89 CR gt 10
9. NEC AccuSync AS193i User s Manual Index a e al ae EEE 9 Earnest ene eee EEE cree tee ate nee ne ee T E E eee ee eee cee ee eee English 1 Registration Information iencarenaccthacteasntecanamone tie cenieancieaubenes sianmaannedennsecanipanehanuipotruneouaadetnenadinutees English 2 Recommended IS Sve crates cate cuatecetnya dt ceyat cual cagnectuncdndin uednmanlosueuen estat evade du taintimeatoonesniasemtueuiucenenaenenads English 3 OU NS 5s cc eee gee ee E E eat oe seein sineueatotan sete guess sebentotsareresconseechesoes English 5 NG E e E E E EAE E AEE A E nea ET EEE EEN EE English 5 CONTO eie A E E E EE E EEE English 8 ES Cr AON oes veces pede nog e ets stereo o EE o E E EES EEE ENEON EREE English 11 TEEL CS A A NE TE A E EEE EA E E E E A TIEA English 12 TOUDI CONOCI Gerec a E E E E E a English 13 TCO Cenimed Displays ce ener een ee oe ee ee ee ee oe er English 14 Manufacturer s Recycling and Energy INformattion cccccecccccsececceeeecceeeeecseeeecseseeeseseeesaaeess English 15 WARNING TO PREVENT FIRE OR SHOCK HAZARDS DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE ALSO DO NOT USE THIS UNIT S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL J CAUTION A N CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK MAKE SURE POWER CORD IS
10. UNPLUGGED FROM WALL SOCKET TO FULLY DISENGAGE THE POWER TO THE UNIT PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock Therefore it is dangerous to make any kind of contact with any part inside this unit A This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included Therefore it should be read carefully in order to avoid any problems CAUTION Please use the power cord provided with this display in accordance with the table below If a power cord is not supplied with this equipment please contact your supplier For all other cases please use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country poma _ RAW ome eo When operating the AccuSync AS193i monitor with its AC 125 240V power ATAN use a power supply cord that matches the power supply voltage of the AC power outlet being used NOTE This product can only be serviced in the country where it was purchased Windows is a registered trademark of Microsoft Corporation NEC is a registered trademark of NEC Corporation ErgoDesign is a registered trademark of NEC Display Solutions Ltd in
11. all causing serious damage to the monitor The power supply cord you use must have been approved by and comply with the safety standards of your country Type HOSVV F 3G 0 75 mm2 should be used in Europe In UK use a BS approved power cord with molded plug having a black 5A fuse installed for use with this monitor Do not place any objects onto the monitor and do not use the monitor outdoors Do not bend power cord Do not use monitor in high temperatured humid dusty or oily areas Do not cover vent on monitor Vibration can damage the backlight Do not install where the monitor will be exposed to continual vibration If monitor or glass is broken do not come in contact with the liquid crystal and handle with care To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks make sure to install the monitor in a stable location and take measures to prevent falling Immediately turn off the power unplug your monitor from the wall outlet and move to a safe location then refer servicing to qualified service personnel under the following conditions If the monitor is used in this condition the monitor may cause fall fire and electric shock If the monitor stand has been cracked or peeled If the monitor has been wobbled If the monitor has an unusual odor When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the monitor If the monitor has bee
12. ced by 35 compared to the maximum brightness setting Q CONTRAST Adjusts the image brightness in relation to the background a AUTO CONTRAST Analog input only Adjusts the image displayed for non standard video inputs o AUTO ADJUST Analog input only Automatically adjusts the Image Position the H Size and Fine setting LEFT RIGHT Analog input only Controls Horizontal Image Position within the display area of the LCD DOWN UP Analog input only Controls Vertical Image Position within the display area of the LCD H SIZE Analog input only Adjusts the horizontal size by increasing or decreasing this setting FINE Analog input only Improves focus clarity and image stability by increasing or decreasing this setting WTE COLOR CONTROL SYSTEMS Five color presets 9300 7500 SRGB USER NATIVE select the desired color setting R COLOR RED Increase or decreases Red The change will appear on screen G COLOR GREEN Increase or decreases Green The change will appear on screen B COLOR BLUE Increase or decreases Blue The change will appear on screen TOOL Selecting TOOL allows you to get into the sub menu N f FACTORY PRESET Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings The 1 2 RESET button will need to be held down for several seconds to take effect Individual settings can be reset by highlighting the control to be reset and pres
13. ecycling facilities can be found on our following websites http www nec display solutions com greencompany in Europe http www nec display com in Japan or http www necdisplay com in USA Energy Saving This monitor features an advanced energy saving capability When a VESA Display Power Management Signalling DPMS Standard signal is sent to the monitor the Energy Saving mode is activated The monitor enters a single Energy Saving mode Normal Operation 14 W Default setting Bue Energy Saving Mode 0 15 W Off Mode 0 15 W WEEE Mark European Directive 2002 96 EC Within the European Union EU wide legislation as implemented in each Member State requires that waste electrical and electronic products carrying the mark left must be disposed of separately from normal household waste This includes monitors and electrical accessories such as signal cables or power cords When you need to dispose of your NEC display products please follow the guidance of your local authority or ask the shop where you purchased the product or if applicable follow any agreements made between yourself and NEC a The mark on electrical and electronic products only applies to the current European Union Member States Outside the European Union If you wish to dispose of used electrical and electronic products outside the European Union please contact your local authority so as to comply with the correct disposal method English 1
14. g periods of time to avoid image persistence after image effects e Get regular eye checkups Ergonomics To realize the maximum ergonomics benefits we recommend the following e To avoid eye fatigue adjust the brightness to a moderate setting Place a sheet of white paper next to the LCD screen for luminance reference e Do not position the Contrast control to its maximum setting e Use the preset Size and Position controls with standard signals e Use the preset Color Setting e Use non interlaced signals with a vertical refresh rate between 60 75 Hz e Do not use primary color blue on a dark background as it is difficult to see and may produce eye fatigue due to insufficient contrast Cleaning the LCD Panel e When the LCD is dusty please gently wipe with a soft cloth e Do not rub the LCD panel with coarse or hard material e Do not apply pressure to the LCD surface e Do not use OA cleaner as it will cause deterioration or discoloration to the LCD surface Cleaning the Cabinet e Unplug the power supply e Gently wipe the cabinet with a soft cloth e To clean the cabinet dampen the cloth with a neutral detergent and water wipe the cabinet and follow with a dry cloth NOTE Many plastics are used on the surface of the cabinet DO NOT clean with benzene thinner alkaline detergent alcoholic system detergent glass cleaner wax polish cleaner soap powder or insecticide Do not touch rubber or vinyl to the cabinet for a
15. ion of the resolution must be done NOTE _ Technical specifications are subject to change without notice English 11 Features Reduced Footprint Provides the ideal solution for environments with space constraints that still require superior image quality The monitor s small footprint and low weight allow it to be moved or transported easily from one location to another Color Control Systems Allow you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards OSD On Screen Display Controls Allow you to quickly and easily adjust all elements of your screen image via simple to use on screen menus NaViSet software Offers an expanded and intuitive graphical interface allowing you to more easily adjust OSD display settings via mouse and keyboard No Touch Auto Adjust No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup ErgoDesign Features Enhance human ergonomics to improve the working environment protect the health of the user and save money Examples include OSD controls for quick and easy image adjustments tilt base for preferred angle of vision small footprint and compliance with MPRII and TCO guidelines for lower emissions Plug and Play The Microsoft solution with the Windows operating system facilitates setup and installation by allowing the monitor to send its capabilities such as screen size and resolutions supported di
16. itors image persistence is not permanent but constant images being displayed for a long period of time should be avoided To alleviate image persistence turn the monitor off for as long as an image was displayed For example if an image was on the monitor for one hour and a residual image remains the monitor should be turned off for one hour to erase the image NOTE As with all personal display devices NEC DISPLAY SOLUTIONS recommends using a screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use Message OUT OF RANGE is displayed screen is either blank or shows rough images only e Image is displayed only roughly pixels are missing and OSD warning OUT OF RANGE is displayed Either signal clock or resolution is too high Choose one of the supported modes e OSD warning OUT OF RANGE is displayed on a blank screen Signal frequency is out of range Choose one of the supported modes Image is unstable unfocused or swimming is apparent e Signal cable should be completely attached to the computer e Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine total When the display mode is changed the OSD Image Adjust settings may need to be re adjusted e Check the monitor and your display card with respect to compatibility and recommended signal timings e lf your text is garbled change the video mode to non interlace and use 60 H
17. lass B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult your dealer or an experienced radio TV technician for help If necessary the user should contact the dealer or an experienced radio television technician for additional suggestions The user may find the following booklet prepared by the Federal Communications Commission helpful How to Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Stock No 004 000 00345 4 Declaration of Conformity This device complies with Part 15
18. n exposed to rain or water If the monitor has been dropped or the cabinet damaged If the monitor does not operate normally by following operating instructions e Allow adequate ventilation around the monitor so that heat can properly dissipate Do not block ventilated openings or place the monitor near a radiator or other heat sources Do not put anything on top of monitor The power cable connector is the primary means of detaching the system from the power supply CAUTION The monitor should be installed close to a power outlet which is easily accessible e Handle with care when transporting Save packaging for transporting e Do not touch LCD panel surface while transporting mounting and setting Applying pressure on the LCD panel can cause serious damage Image Persistence Image persistence is when a residual or ghost image of a previous image remains visible on the screen Unlike CRT monitors LCD monitors image persistence is not permanent but constant images being displayed for a long period of time should be avoided To alleviate image persistence turn off the monitor for as long as the previous image was displayed For example if an image was on the monitor for one hour and a residual image remains the monitor should be turned off for one hour to erase the image NOTE As with all personal display devices NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or t
19. nizations around the world rely on TCO Certified as a tool to help them reach their sustainable IT goals We are owned by TCO a non profit organization representing office workers TCO Development is headquartered in Stockholm Sweden with regional presence in North America and Asia For more information please visit www tcodevelopment com English 14 Manufacturer s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company s top priorities in trying to minimize the burden placed on the environment We are engaged in developing environmentally friendly products and always strive to help define and comply with the latest independent standards from agencies such as ISO International Organisation for Standardization and TCO Swedish Trades Union Disposing of your old NEC product The aim of recycling is to gain an environmental benefit by means of re use upgrading reconditioning or reclamation of material Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed To ensure the best recycling of our products NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way once it has reached the end of its life All required information concerning the disposal of the product and country specific information on r
20. og output Connect the 15 pin mini D SUB signal cable to the connector of the display card in your system Figure A 2 Tighten all screws For the MAC Connect the Macintosh cable adapter not included to the computer and then attach the 15 pin mini D SUB signal cable to the Macintosh cable adapter Figure A 3 Tighten all screws Stand Base Stand NOTE Some Macintosh systems do not require a Macintosh cable adapter a N A 2 Mh ALN la AS i S O ANH a T MN MUD DVI Signal Cable not included Figure A 1 Figure A 2 not included Figure A 3 Macintosh Cable Adapter English 5 3 Connect the 15 pin mini D SUB of the video signal cable to the appropriate connector on the back of the monitor Figure B 1 4 Connect one end of the power cord to the monitor and the other end to the power outlet Place the Video Signal Cable and power cord to the Cable holder Figure C 1 NOTE Adjust position of cable placed to the Cable holder to avoid damage for cable or monitor NOTE Please refer to Caution section of this manual for proper selection of power cord 5 Turn on the monitor with the bottom power button and the computer Figure D 1 Power cable Pa Input VGA W WW qu Se Power Button Figure B 1 Figure C 1 Figure D 1
21. oves leftward Moves rightward Icon select selects function icon Displaying on screen Adjusts the function of the Adjusts down Adjusts up Reset the function Function adjustment selected icon 2 OSD structure Main Menu Icon Select Main Menu Adjust Pr i Press e SELECT II tell SELECT AHi E Hll key MATIE R G B key MATIE R G B b fl n BRIGHTNESS 1 D SUB ECO MODE 1 31 5 kHz 60 0Hz 640480 RESET CHANGE MOD Press SELECT key Adjust by using Or Example Tool D c o 3 AUTO o od R11 eI fll MIME R G B n Press SELECT key 1 D SUB 31 5kHz 60 0Hz 640X480 Press SELECT key TOOL TOOL TOOL 2H ma a Press og fl Ga 3 ee A a mo Z Or Z g Or Z eco qeee NECDISPLAYSOLUTIONS COM NECDISPLAYSOLUTIONS COM NECDISPLAYSOLUTIONS COM Sub Menu Icon Select Press SELECT key TOOL Adjust by using Fd E fen C3 0000 Z R or eco OSD TURN OFF co 45SEC Sub Menu Adjust English 8 Q BRIGHTNESS Adjusts the overall image and background screen brightness To enter ECO MODE press the 1 2 RESET button ECO MODE OFF Sets brightness variable to 100 ECO MODE1 Sets brightness to 70 This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions ECO MODE2 Sets brightness to 40 This setting can adjust brightness to a range in which power is redu
22. rectly to your computer automatically optimizing display performance Intelligent Power Manager System Provides innovative power saving methods that allow the monitor to shift to a lower power consumption level when on but not in use saving two thirds of your monitor energy costs reducing emissions and lowering the air conditioning costs of the workplace Multiple Frequency Technology Automatically adjusts monitor to the display card s scanning frequency thus displaying the resolution required FullScan Capability Allows you to use the entire screen area in most resolutions significantly expanding image size VESA Standard Mounting Interface Allows users to connect your AccuSync monitor to any VESA standard third party mounting arm or bracket Allows for the monitor to be mounted on a wall or an arm using any third party compliant device Environmental Impact Annual typical maximum operating carbon footprint of this monitor world wide average is approximately 16 3 kg calculated by rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power to Carbon conversion factor conversion factor is based on OECD publication of global CO2 emissions 2008 Edition This monitor has a manufacturing carbon footprint of approximately 19 9 kg NOTE The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors and are accurate at the time of printing NEC reserve
23. s the right to publish updated carbon footprint values HDCP High bandwidth Digital Content Protection HDCP is a system for preventing illegal copying of video data sent over a Digital Visual Interface DVI If you are unable to view material via the DVI input this does not necessarily mean the display is not functioning properly With the implementation of HDCP there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision intention of the HDCP community Digital Content Protection LLC English 12 Troubleshooting No picture e The signal cable should be completely connected to the display card computer e The display card should be completely seated in its slot e Check front power Switch and computer power switch should be in the ON position e Check to make sure that a supported mode has been selected on the display card or system being used Please consult display card or system manual to change graphics mode e Check the monitor and your display card with respect to compatibility and recommended settings e Check the signal cable connector for bent or pushed in pins e Check the signal input Power Button does not respond e Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor Image persistence e Image persistence is when a ghost of an image remains on the screen even after the monitor has been turned off Unlike CRT monitors LCD mon
24. sing the 12 RESET button EXIT Selecting EXIT allows you to exit OSD menu sub menu 3 LANGUAGE OSD control menus are available in nine languages English 9 H OSD TURN OFF The OSD control menu will stay on as long as it is in use In the OSD TURN OFF submenu you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu The preset choices are 10 120 seconds by 5 seconds step OSD LOCK OUT This control completely locks out access to all OSD control functions with the exception of Brightness and Contrast When attempting to activate OSD controls while in the Lock Out mode a screen will appear indicating the OSD is locked out To activate the OSD Lock Out function press 1 2 RESET then button and hold down simultaneously To de activate the OSD Lock Out press 1 lt 2 RESET then button and hold down simultaneously SIGNAL INFORMATION If you select ON monitor displays VIDEO INPUT MENU after change Input Port If you select OFF monitor doesn t display VIDEO INPUT MENU after change Input Port DDC CI Turns ON or OFF the two way communication and control of the monitor CARBON SAVINGS Display the estimated carbon saving information in kg The carbon footprint factor in the carbon saving calculation is based on the OECD 2008 Edition The carbon saving information can be reset by pressing the 1 lt 2 RESET button
25. stem Manufacturer must be certified according to either ISO 14001 or EMAS Minimization of Hazardous Substances Limits on cadmium mercury lead amp hexavalent chromium including requirements for mercury free products halogenated substances and hazardous flame retardants Design for Recycling Coding of plastics for easy recycling Limit on the number of different plastics used Product Lifetime Product Take Back Minimum one year product warranty Minimum three year availability of spare parts Product takeback Packaging Limits on hazardous substances in product packaging Packaging prepared for recycling Ergonomic User centered design Visual ergonomics in products with a display Adjustability for user comfort displays headsets Acoustic performance protection against sound spikes headsets and fan noise projectors computers Ergonomically designed keyboard notebooks Electrical Safety minimal electro magnetic Emissions Third Party Testing All certified product models have been tested in an independent accredited laboratory A detailed criteria set is available for download at www tcodevelopment com where you can also find a searchable database of all TCO Certified IT products TCO Development the organization behind TCO Certified has been an international driver in the field of Sustainable IT for 20 years Criteria in TCO Certified are developed in collaboration with scientists experts users and manufacturers Orga
26. urning off the monitor when not in use English 3 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE SHOULDER AND NECK FATIGUE CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR e For optimum performance allow 20 minutes for the display to warm up e Adjust the monitor height so that the top of the screen is at or slightly below eye level Your eyes should look slightly downward when viewing the middle of the screen e Position your monitor no closer than 40 cm 15 75 inches and no further away than 70 cm 27 56 inches from your eyes The optimal distance is 50 cm 19 69 inches e Rest your eyes periodically by focusing on an object at least 20 feet away Blink often e Position the monitor at a 90 angle to windows and other light sources to minimize glare and reflections Adjust the monitor tilt so that ceiling lights do not reflect on your screen e If reflected light makes it hard for you to see your screen use an anti glare filter e Clean the LCD monitor surface with a lint free non abrasive cloth Avoid using any cleaning solution or glass cleaner e Adjust the monitor s brightness and contrast controls to enhance readability e Use a document holder placed close to the screen e Position whatever you are looking at most of the time the screen or reference material directly in front of you to minimize turning your head while you are typing e Avoid displaying fixed patterns on the monitor for lon
27. z refresh rate Picture is not as bright e Make sure ECO MODE is turned off LED on monitor is not lit no blue or amber color can be seen e Power Switch should be in the ON position and power cord should be connected Display image is not sized properly e Use the OSD Image Adjust controls to increase or decrease the H SIZE e Check to make sure that a supported mode has been selected on the display card or system being used Please consult display card or system manual to change graphics mode No Video e If no video is present on the screen turn the Power button off and on again e Make certain the computer is not in a power saving mode touch the keyboard or mouse English 13 TCO Certified Displays 6 Congratulations This product is TCO Certified for Sustainable IT TCO Certified is an international third party sustainability certification for IT products TCO Certified ensures that the manufacture use and recycling of IT products reflect environmental social and economic responsibility Every TCO Certified product model is verified by an accredited independent test laboratory This product has been verified to meet all the criteria in TCO Certified including Corporate Social Responsibility Socially responsible production working conditions and labor law in manufacturing country Energy Efficiency Energy efficiency of product and power supply Energy Star compliant where applicable Environmental Management Sy

User Manual AS193i-BK

Contents

Download Pdf Manuals

Related Search

Related Contents