SureCall Flex Pro User Guide
Contents
1. shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association and judgment upon the award rendered may be entered in any court having jurisdiction thereof If one or more provisions provided herein are held to be invalid or unenforceable under applicable law then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 14 All rights reserved SPECIFICATIONS Supported Standards p a ne GSM LTE Uplink Frequency Range ee eee 800 824 849 MHz PCS 1850 1910 MHz Downlink Frequency Range Cellular 869 894 MHz PCS 1930 1990 MHz Maximum Gain Cellular 65 dB PCS 72 dB Noise w e Power Transmitter Input e 110 V 60 Hz Output DC 5 V 15 V Maximum Output Power 1 LL l EIRP RF Connectors N Female both ends Power Consumption 10W Dimensions 8x5x1 25in 20 32 x 12 7 x 3 175 cm Weight 1 5 Ibs 68 kgs FCC ID USA RSNFLEXPRO SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 15 All rights reserved SAFETY INFORMATION This is a CONSUMER device BEFORE USE you MUST REGISTER THIS DEVICE with your wireless provider and have your provider s consent Most wireless providers consent to the use of signal boosters Some providers may not consent to the use2. 65 6283 You can also consult a Cellphone Mate technical specialist directly by emailing us at support surecall com Record the model and serial number for your products Serial Purchase Date SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 12 All rights reserved WARRANTY Two Year Product Warranty Cellphone Mate warrants its products for two years from the date of purchase against defects in workmanship and or materials Products returned by customers must be in their original un modified condition shipped in the original or protective packaging with proof of purchase documentation enclosed and a Return Merchandise Authorization RMA number printed clearly on the outside of the shipping container Buyers may obtain an RMA number for warranty returns by calling the Cellphone Mate Return Department toll free at 1 888 365 6283 Any returns received by Cellphone Mate without an RMA number clearly printed on the outside of the shipping container will be returned to sender In order to receive full credit for signal boosters all accessories originally included in the signal booster box must be returned with the signal booster The Buyer does not need to include accessories sold in addition to the signal booster such as antennas or cables This warranty does not apply to any product determined by Cellphone Mate to have been subjected to misuse abuse neglect or mishandling that alters or damages the product s
3. Dual Band Wireless Adjustable Signal Booster Kit INTRODUCTION 2 THEORY OF OPERATION SURECALL FLEX PRO PACKAGES 3 FLEX PRO BOOSTER HARDWARE 4 SUMMARY AND DESCRIPTION OF SAFEGUARD FEATURES SITE SELECTION INSTALLATION INSTRUCTIONS TROUBLESHOOTING 9 FREQUENTLY ASKED QUESTIONS 12 OBTAINING TECHNICAL SUPPORT 12 WARRANTY 13 SPECIFICATIONS 15 SAFETY INFORMATION 16 Flex Pro Booster Flex Pro Omni Kit Flex Pro Panel Kit FLEX PRO User Guide INTRODUCTION Congratulations on purchasing the SureCall Flex Pro the finest cellular signal booster available SureCall adjustable cellular signal boosters and kits from Cellophone Mate remove frustrations over dropped calls limited range and slow data rates by amplifying incoming and outgoing cellular signals in buildings offices and homes The Flex Pro is designed with leading edge technologies to detect and amplify weak incoming signals your cellular device would otherwise miss and to broadcast a significantly stronger signal back to the cell tower This guide contains all the information you need to get your SureCall Flex Pro booster system up and running Theory of Operation The SureCall Flex Pro is a high quality bidirectional signal booster that boosts cellular signals for areas prone to weak or shadowed cellular coverage The Flex Pro works with two antennas x An inside antenna that communicates with your cell phone x An outside antenna that communicates wit
4. eed to return it Site Selection For optimum performance select a location for your booster that x Provides the best signal strength possible To measure your existing cell signal on an Apple iPhone dial 3001 12345 and press Call In the top left corner a number appears instead of bars For Android devices you can download several apps to measure exact signal strength Look up check real signal strength to find a cell signal measurement app x Avoids areas where wireless signals can be blocked or reflected by buildings walls trees hills and other terrain features This can result in low signal strength x Is not close to energy efficient windows which can affect signal penetration into a home or office Note The cell phone tower site in relation to the location where you install your booster also determines signal strength Although cell phone providers try to place towers for maximum coverage local ordinances and terrain features can restrict tower locations which can limit signal strength at your location SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 5 All rights reserved INSTALLATION Installation Instructions The Flex Pro signal booster is suited for installation in a building or home Step 1 Connect the Outside Antenna 1 Mount the fiberglass antenna in an outside mounting location that x Has at least a 12 inch radius clear of obstructions and other radiating elements x Is at
5. f Coverage Area is and Antenna Separation is Set Both Dials to 4000 square feet 60 feet 60 default setting Note As you can see from the table above acquiring the recommended indoor and outdoor antenna separation optimizes coverage significantly Any reduced antenna separation reduces the booster s cellular signal capabilities Important A minimum separation distance of 30 vertical feet is necessary between the outside and inside antennas If the inside coverage is not sufficient you may need as much as 60 feet of separation See the table above SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 8 All rights reserved TROUBLESHOOTING In the unlikely event you encounter a problem use the following steps to identify and resolve the issue Booster has no power After installing the booster system you have no signal or reception Verify that the switch on the power supply is turned on and red LED is ON Connect the power supply to an alternate power source Be sure the power source is not controlled by a switch that can remove power from the outlet Check the green POWER LED on the booster If it is OFF return the power supply to Cellphone Mate Contact tech support at 1 888 365 6283 email support surecall com or go to surecall com and log on via online support to receive a Return Merchandise Authorization RMA Check the strength of the outside signal as close as you can to the out
6. for connecting the outside antenna to the booster Signal booster Inside antenna Cable for connecting the inside antenna to the booster Power supply x X X X K X Warning Unauthorized antennas cables and or coupling devices are prohibited by FCC new rules Please contact FCC for details 1 888 CALL FCC Changes or modifications not expressly approved by Cellphone Mate could void the user s authority to operate the equipment SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 3 All rights reserved INTRODUCTION Flex Pro Booster Hardware The following figure shows the key hardware components on the Flex Pro cellular signal booster Refer to this figure as you install your SureCall Flex Pro components Outdoor Antenna Connector not shown Power LED Alert LED Alert LED Cellular 800 Dial PCS 1900 Dial Digital Interface Indoor Antenna Power Connector Connector Summary and Description of Safeguard Features This device is equipped with all the safeguard features required by FCC new rules to ensure no interference is created to affect the cell tower AGC automatic shutdown Dual RSSI monitoring automatic silence and more SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 4 All rights reserved INSTALLATION Unpack all package contents and check for damage For missing or damaged items contact your reseller Keep the carton and packing material to store the product or if you n
7. h the cell tower Signals sent from a cell tower are received by the outside antenna amplified by the booster and then sent to your phone via the inside antenna When your phone transmits the signal is sent to the inside antenna and then sent to the cell tower via the outside antenna Some cell signal is required for the Flex Pro to enhance cellular signal coverage The weakest cell signal for the Flex Pro to work is low 100dBm to high 90dBm dBm is an abbreviation for the power ratio in decibels of the radio power per one milliwaitt To measure your existing cell signal on an Apple iPhone dial 3001 12345 and press Call In the top left corner a number appears instead of bars For Android devices you can download several apps to measure exact signal strength Look up check real signal strength to find a cell signal measurement app SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 2 All rights reserved INTRODUCTION SureCall Flex Pro Packages Flex Pro Antenna Kitting Information Component Product Number Gain Loss Loss Notes Description 800 Sa 1900 MHz options Outdoor Cable CM240 40EN 40 feet 3 98 dB 6 52 dB SS options CM400 65NN 65 feet 3 89 dB 5 43 dB 65 feet or longer e Indoor Cable CM240 20FN 20 feet 329 dB 3 56 dB gt options CM400 40NN 40 feet 2 63 dB 3 57 dB od Note For the signal booster to work the following items are required Outside antenna Cable
8. is connected x Consult the dealer or an experienced radio TV technician for help SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 16 All rights reserved 48346 Milmont Drive Fremont California 94538 USA 888 365 6283 Fax 510 996 7250 www surecall com Cellphone Mate has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customers Cellophone Mate shall not be held liable to anyone for any indirect special or consequential damages due to omissions or errors The information and specifications in this document are subject to change without notice Copyright 2014 All Rights Reserved All trademarks and registered trademarks are the property of their respective owners SureCall Flex Pro User Guide January 26 2014 SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 17 All rights reserved
9. ive bond reaches maximum strength after 24 hours With both the Velcro loop and hook pieces attached to the back of the booster peel the protective paper off of the back of the loop strips Press the entire booster into its mounting place and then wait 5 minutes for the adhesive to set Be sure the booster is seated firmly To remove the booster rotate it across the Velcro Do not pull the booster or cables Step 4 Connect to AC Power 1 2 Connect the AC power cord to the booster see page 4 Connect the plug on the other end to a 110V AC power outlet Be sure all connections to the booster are tight and secure x The booster turns on automatically x The Power LED goes ON to show that the booster is ready for use see page 4 x The Alert LEDs flash up to 15 seconds on each band to show the band is activated see page 4 The booster is rated for 5 20V input voltage DO NOT use the booster with a higher voltage power supply This can damage the booster and or cause personal injury SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 7 All rights reserved INSTALLATION Step 5 Configure Gain Settings 1 Facing the front of your booster find the Cellular 800 dial on the left side and the PCS 1900 dial on the right side See page 4 Celbular 800 PCS 1900 2 Set these dials according to the coverage area and the distance between the indoor and outdoor antennas see the following table I
10. least 75 feet in a straight line from the inside antenna when used in an area prone to weak cellular signals and operating the booster at full 65dB gain x Is not co located or operating with any other antenna or booster 2 Using the CM240 or CM400 cable connect the outside antenna to the booster connector marked OUTSIDE see page 4 3 Hand tighten the connection Step 2 Connect the Inside Antenna 1 Mount the inside antenna Xx Omnidirectional dome antenna mount the antenna on the ceiling ina central location where you want reception x Panel antenna install the antenna against a wall or surface projecting where you want reception 2 Using the CM240 or CM400 cable connect the inside antenna to the booster connector marked INSIDE see page 4 3 Hand tighten the connection SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 6 All rights reserved INSTALLATION Note With a signal booster kit with panel antenna stay 61 2 feet from the panel based on new FCC rules Step 3 Mount the Booster Optional 1 2 3 7 Select a location for your booster Clean the intended surface and allow it to dry Peel the protective paper from the back of the hook sides of the Velcro Press the adhesive side of the Velcro strips into place on the bottom of the booster one strip on each end Wait 5 minutes and then attach the loop side of the Velcro to the hook side The adhes
11. of this device on their network If you are unsure contact your provider You MUST operate this device with approved antennas and cables as specified by the manufacturer Antennas MUST be installed at least 20 cm 8 inches from any person You MUST cease operating this device immediately if requested by the FCC ora licensed wireless service provider WARNING E911 location information may not be provided or may be inaccurate for calls served by using this device Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures x Reorient or relocate the receiving antenna x Increase the separation between the equipment and receiver x Connect the equipment into an outlet on a circuit different from that to which the receiver
12. oster from automatically enabling Auto Shutdown Once away from the original location perform the procedure under Step 4 Connect to AC Power on page 7 More antenna separation is needed If you cannot provide more antenna separation and the Alert LEDs flash after the initial activation period lower the dial above the blinking LED by 5dB for example from 50 to 45 and monitor the bars on your cell phone to see whether reception improves The Power LED does not Be sure the AC outlet is working and is not controlled by a turn ON wall switch that can remove power from the outlet SureCall Flex Pro Home and Office Kit Cellphone Mate Inc All rights reserved Page 10 TROUBLESHOOTING Problem Resolution The Alert LEDs flash after Lower the dial above the blinking LED by 5dB for the initial activation example from 60 to 55 and monitor the bars on your cell period phone to see whether reception has improved The Alert LEDs continue The booster shuts down automatically and then restarts to flash after 60 seconds Turn down the Cellular 800 or PCS 1900 dial that is oscillating to prevent the booster from shutting down automatically SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 11 All rights reserved FREQUENTLY ASKED QUESTIONS For a list of Frequently Asked Questions and a comprehensive up to date Troubleshooting Guide please visit our website at www surecall com or call us at 1 800 3
13. ot be considered defective or non conforming to the Buyer s order if they satisfactorily fulfill the performance requirements that were published in the product specification literature or in accordance with samples provided by Cellphone Mate This warranty shall not apply to any products or parts thereof which have been subject to accident negligence alteration abuse or misuse Cellphone Mate makes no warranty whatsoever in respect to accessories or parts not supplied by it SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 13 All rights reserved WARRANTY Limitations of Warranty Damages and Liability EXCEPT AS EXPRESSLY SET FORTH HEREIN THERE ARE NO WARRANTIES CONDITIONS GUARANTEES OR REPRESENTATIONS AS TO MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTIES CONDITIONS GUARANTEES OR REPRESENTATIONS WHETHER EXPRESSED OR IMPLIED IN LAW OR IN FACT ORAL OR IN WRITING CELLPHONE MATE AGGREGATE LIABILITY INDAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT IF ANY RECEIVED BY CELLPHONE MATE INC FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED AS THE CASE MAY BE WHICH IS THE SUBJECT OF CLAIM OR DISPUTE INNO EVENT SHALL CELLPHONE MATE INC BE LIABLE FOR INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES HOWSOEVER CAUSED All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California and any controversy that cannot be settled directly
14. physical or electronic properties Cellphone Mate warrants to the Buyer that each of its products when shipped will be free from defects in material and workmanship and will perform in full accordance with applicable specifications The limit of liability under this warranty is at Cellphone Mate s option to repair or replace any product or part thereof which shall within TWO YEARS of purchase as determined by examination by Cellphone Mate prove defective in material and or workmanship Warranty returns must first be authorized in writing by Cellphone Mate Disassembly of any Cellphone Mate Inc product by anyone other than an authorized representative of Cellphone Mate voids this warranty in its entirety Cellphone Mate reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products As acondition to the warranties provided for herein the Buyer will prepay the shipping charges for all products returned to Cellphone Mate for repair and Cellphone Mate will pay the return shipping with the exception of products returned from outside the United States in which case the Buyer will pay the shipping charges The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise which are found to meet the applicable specifications or which are not defective or not covered by this warranty Products sold by Cellphone Mate shall n
15. side antenna To measure your existing cell signal Apple iPhone dial 3001 12345 and press Call In the top left corner a number replaces the bars Android devices download apps to measure exact signal strength such as Network Signal Info in the Google Play store Search check real signal strength to find other cell signal measurement apps Double check all booster and antenna cable connections Be sure your booster s dB gain is turned up to full power on each dial SureCall Flex Pro Home and Office Kit Cellphone Mate Inc Page 9 All rights reserved TROUBLESHOOTING Problem Resolution One of the red lights next to the dials on your booster is flashing Your booster restarted and shut down for 15 minutes and is now shut down permanently The red LED goes ON 1 Turn down the dB gain on the dial until the light goes OFF or turns yellow Be sure the inside panel antenna is facing away from the outside antenna Use the recommended antenna separation 65dB 60 ft separation 63dB 50 60 ft separation 55dB 40 50 ft separation 50dB 30 40 ft separation 45dB 20 30 ft separation 40dB 10 20 ft separation 35dB 10 ft separation Each SureCall booster is equipped with Auto Shutdown to prevent cell tower interference The outside antenna may be close to a cell tower Move the outside antenna to a location that provides sufficient distance from the cell tower to prevent the bo
Download Pdf Manuals
Related Search