PDi Communication Systems
Contents
1. first Sources gt FM Radio La Position AV Exit SETUP FM Radio SS cAn o Program 3 Inthe FM Radio Setup menu select Auto Program A Frequency 100 7 Tie confirmation screen will appear a Add Delete Added Position AV Exit SETUP Confirm FM Radio Program Confirmation 4 Inthe Confirm FM Radio Program menu press Channel Up on the remote to begin or Channel Down to abort The TV will now search every available FM frequency and memorize frequencies that contain radio stations NOTE FM radio signals must be present on the coax input cable for the TV s FM radio feature to work properly Exit SETUP 10 Document Number PD196 167R2 Troubleshooting CHECK Ensure the TV is connected to a powered AC outlet The TV s front lamp will glow Red when correctly connected to power Operate the TV directly by pressing the TV s POWER button located on No Picture and No Sound the side of the cabinet Try to cycle power to the TV by pulling the power cord from the AC outlet wait for 30 seconds plug it back into the outlet wait 15 seconds or more and then try to turn On the TV again Verify TV is set to an active Video Source or set directly to TV by pressing the TV AV button on the side of the TV or the TV AV button on the remote No Picture Sound OK control If an Auxiliary Input Source is selected verify the Video input signal cable is connected and the video source is playing Verify the2. Channel Sequence Set the sequence in which the TV displays channels Interleave A D Analog and Digital appear grouped together All A then D Analog appear first followed by Digital Additional Digital Provides a second auto search for channels Signal using a different signal type None Disabled Air Antenna Tuning Cable STD Standard Cable Cable IRC Incremental Related Cable Cable HRC Harmonic Relate Cable Free One of three different service levels Confirm Auto Program Begins the Auto Program process Auto channel banks used to hold different Program requires 2 to 12 minutes to groupings of channels complete groupings of channels complete Premium One of three different service levels Confirm Auto Program Begins the Auto Program process Auto channel banks used to hold different Program requires 2 to 12 minutes to groupings of channels complete Add Delete Add or Delete Channels from a Service Channels Level Basic One of three different service levels Confirm Auto Program Begins the Auto Program process Auto channel banks used to hold different Program requires 2 to 12 minutes to Basic Selects the Basic service level edit menu Premium Selects the Premium service level edit menu Analog Channel Selects the channel to be edited Add Delete Analog Sets the indicated Analog channel to either Channel Deleted or Added Enable Disable Digital Displays a list of auto programmed Digital Channel
3. S Video S Video Video input jack IN L R Left and Right Audio input jacks common for both Composite or S Video inputs OUT Composite Video Demodulated TV signal Composite output video OUT Coaxial Demodulated TV signal Digital audio output OUT L R Demodulated TV signal Left and Right output audio HDMI2 HDMI signal input jack Input for the high quality HDMI signal HDMI1 HDMI signal input jack Input for the high quality HDMI signal Homi VGA VGA Video Input jack The TV can be used as a computer monitor VGA AUDIO PC Audio Input jack The TV s internal speakers can be used for computer sound COMM CCI Computer Control Interface jack NOTE DO NOT connect to a hospital s data network as damage will result to thel TV COMM MTI Multiple Television Interface jack Use with external control boxes NOTE DO NOT connect to a hospital s data network as damage will result to the TV EXT 5V External 5V Input for TV service diagnostics HOUR METER Digital Readout of the TV s hours Hew PILLOW Pillow Speaker Jack See PILLOW SPEAKER CONNECTIONS for details e CR OFF CP CZ Pillow Speaker compatibility switch See PILLOW SPEAKER CONNECTIONS for details Document Number PD196 167R2 Programming the TV Connect the TV to a Cable TV signal before proceeding Verify the handheld remote control operates the TV 1 Press the se
4. PC ANALOG Disabled Enabled APO Enabled No APO FM Radio FM Radio Setup menu Auto Program Automatic search for FM radio stations present on the connected coax cable 21 Document Number PD196 167R2 This page intentionally blank 22 Document Number PD196 167R2 PDI Limited Warranty PDI Communication Systems PDI warrants this product except as set forth below ONLY TO THE ORIGINAL PURCHASER to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original purchase fora period of2 years for parts and 2 years for labor The Warranty Period THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 50 UNITED STATES THE DISTRICT OF COLUMBIA AND CANADA If this product is found to be defective PDI will repair or replace defective parts at no charge to the original owner during the warranty period Such repair and replacement services shall be rendered by PDI or a PDI Authorized Servicer during normal business hours Parts used for replacement or repair are warranted only for the remainder of the Warranty Period To return a product for service please obtain a Return Material Authorization RMA from PDI Products returned without a RMA will not be serviced WHAT IS NOT COVERED This limited warranty provided by PDI does NOT cover 1 Product which has been subject to abuse accident alteration modification tampering negligence misuse faulty installation lack of reasonable care or if affixed to any attachme
5. Channel Free 12 Basic Last Premium Last Position AV Exit SETUP Next lt gt Free Confirmation gt Basic Blank gt Premium Blank gt Position AV Yes A Exit SETUP Next lt gt Exit SETUP No V Copy Service Level i Copy Service Level From Free To Basic gt From Free To Basic gt Adjust From A Adjust To Y Adjust From A Adjust To V Exit SETUP Next lt gt Exit SETUP Next lt gt Confirm Copy Confirmation gt Yes A Exit SETUP No V Parental Control sy TV Rating TV Rating gt ALL FV LS V D MPAA Rating gt TV Y U Advanced Rating gt TV Y7 U U Advanced Rating Option Disabled TV G U Change Password gt TV PG U UUUU Aux Block Sources Unblocked TV 14 U TO Ug Block Hour Always TV MA U U U U Parental Lock Disabled Position AV Position AV Exit SETUP Next lt gt Exit SETUP Next lt gt MPAA Rating G U PG U PG 13 U aR U NC 17 U X U No Rating U Position AV Exit SETUP Next lt gt Change Password Enter Password 15 Confirm Password Ama Exit SETUP Document Number PD196 167R2 TV Menu Navigation continued SETUP Service Level Free Picture gt Sound gt Channel Setup gt Features gt OSD Language English Source Setup gt FM Radio gt Positio
6. Code ll Document Number PD196 167R2 Cloning the TV Saving Settings The TV settings can be saved to a USB Flash Drive and then used to program another television A specially prepared USB Flash Drive not supplied is required Please contact PDI to purchase this optional ESS Settings to TV Save Settings to USB item e Download Firmware to TV Information SAVING A TV S SETTINGS 1 Turn the TV On and insert the USB Flash Drive into the Cloning USB Slot located on the back of the TV A Cloning Main Menu will appear when the Drive is properly installed 2 From the Cloning Main Menu select Save Settings to USB Position A V Next gt 3 Inthe Save Settings to USB Drive menu select the appropri Save Settings to USB Drive ate model A confirmation menu will appear CV2600 gt CV3200 Position AV 4 Inthe confirmation menu select Channel Up for Yes to save the Save Settings to USB Drive settings Otherwise press Volume Down to exit without saving the TV s setting Overwrite CV2600 tdf with settings from TV 5 The USB Flash Drive can now be removed and used to program another television with its settings 12 Document Number PD196 167R2 Cloning the TV Restoring Settings A TV settings once saved to a USB Flash Drive and then be used to program another television A specially prepared USB Flash Drive not supplied is required Please contact PDI to purchase this optional a Rest
7. Move Picture left or right V Position Moves Picture up or down Auto Automatically adjust picture Sets a minimum sound level The TV s sound level can not be adjusted below the minimum volume setting The default value is 0 Sets a maximum sound level The TV s sound level can not be adjusted above the maximum volume setting The default value is 100 Power On Volume Sets an initial sound level when the TV is first turned on The default value is LAST Internal Speaker Enable Opens a sub menu that provide Disabling Enabling the TV s internal speakers Items are shown in the default setting TV Enabled Composite Video Enabled S VIDEO Enabled Component 1 Enabled Component 2 Enabled HDMI 1 Enabled HDMI 2 Enabled PC Analog Enabled FM Radio Enabled HDMI 1 Audio Port Audio ports HDMI 1 or 2 PC or Component 1 HDMI 2 Audio Port or 2 can be used as inputs for HDMI sound a a Composite S Video Mode Adjust Composite S Video for L L L R or RtR 17 Document Number PD196 167R2 TV Menu Explanations continued Explanation Sub ltem Explanation Channel Setup Programs different channels and sources into each of the 3 service levels Sets the TV to tune 1 of 4 different signal styles Air Cable STD Cable IRC Cable HRC Auto Program TV automatically scans for active Scan for Analog Only Digital Only or channels and memorizes them into the Analog and Digital channels selected service level
8. Sound has not been muted Check the Volume settings Verify pillow speaker is connected and the volume control on the pillow speaker is properly adjusted If an Auxiliary Input Source is selected verify the Audio input signal cable is connected and the video source is playing Picture OK No Sound Verify the sound has not been muted No Sound from Internal TV Speaker Verify the TV s internal speakers have not been disabled in the Internal Speaker Enable setup menu Check that external light sources such as windows or overhead lights are Picture is too Light not creating glare on the TV s screen Check the TV s Brightness and Contrast settings in the TV s Picture menu Picture is too Dark e Check the TV s Brightness and Contrast settings in the TV s Picture menu e Verify the coax cable is connected correctly plete PEARS A ONIREK e The cable TV signal may be too weak Picture has Ghost Images e The cable TV signal may be too weak e The coax cable connection may be loose Picture has Stripes or Dots e The cable TV signal may be too weak e The coax cable connection may be loose Pillow Speaker does not Control TV e Check the TV s Pillow Speaker Selector switch is correctly set e Replace Pillow Speaker e Replace the remote s batteries Remote Control does not work e Verify that strong fluorescent lights are not flooding the TV s IR windows e For patient remote controls verify remote is set to the correct Bed
9. features have been investigated by the Underwriters Laboratory and Listed for use in Hospitals Nursing Facilities Dialysis Clinics and similar healthcare services SERVICING User Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions e When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation If the product has been dropped or damaged in any way e When the product exhibits a distinct change in performance which indicates a need for service Replacement Parts When replacement parts are required be sure the service techni
10. level to approximately 50 to provide a fixed level of sound for the pillow speaker to adjust NOTE Pillow Speakers with dedicated Volume Up and Volume Down buttons do not require a Minimum Volume adjustment Service Level Picture Sound Channels Features OSD Language Sources FM Radio Position A V Exit SETUP Balance Minimum Volume Maximum Volume Power On Volume Internal Speaker Enable HDMI 1 Audio Port HDMI 2 Audio Port Composite S Video Sound Mode Position A V Exit SETUP Internal Speaker Enable TV Composite Video S VIDEO Component 1 Component 2 HDMI 1 HDMI 2 PC ANALOG FM RADIO Position A V Exit SETUP Balance Minimum Volume Maximum Volume Power On Volume Internal Speaker Enable HDMI 1 Audio Port HDMI 2 Audio Port Composite S Video Sound Mode Position A V Exit SETUP Document Number PD196 167R2 English gt gt Next lt gt Next lt gt Speaker Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Next lt gt Next lt gt Programming the TV s FM Radio Connect the TV to a Cable TV signal before proceeding Verify the handheld remote control operates the TV Service a Service Level fre 1 Press the setup button on the remote Picture Sound 2 From the Setup menu select FM Radio NOTE if the FM Radio DNES eatures OSD Language English item is non selectable enable FM Radio in the Sources menu
11. utilizes the industry standard 3 wire interface via a 1 4 inch stereo jack located on the back of the TV Additionally the TV employes a universal pillow speaker interface that can be configured to operate with many different model pillow speakers Move the pillow speaker slide switch located next to the Pillow Jack to match the appropriate style pillow speaker Refer to your nurse call system wiring instructions for the pillow speaker s bed side connections Slide Switch Position Pillow Speaker Type RCA Disables Pillow Speaker Control DATA 00000809D O0O0GQ o0oaaoqD ANALOG DIGITAL lt W _ SOUND COMMON CR OFF CP CZ PILLOW TV CONNECTION K TO BEDSIDE CONNECTION WARNING Do Not Ground the Common wire connection Grounding the connection will by pass the TV s pillow speaker isolation circuit and increase the risk of electrical shock Document Number PD196 167R2 TV CONTROLS amp CONNECTIONS TV Controls Standard TV controls are located on the TV s lower right cabinet side Basic control is provided TV AV Switches the TV between various Enabled Sources Press the button once to verify the current sources Press the button additional times to advance to the next active source CC Closed Caption Sub Title control Press the button once to verify the current Closed Caption mode Press the button additional times to advance to the next Closed Ca
12. 0 Source Setup gt PC Analog HDMI Picture gt R G B FM Radio gt Component Input Picture gt Position AW Exit SETUP Next lt gt Position AW Position AW Exit SETUP Next lt gt Exit SETUP Next lt gt PC Analog HDMI Picture Temperature 6500 Clock 50 Sound Phase 50 Balance 0 eres i 1 a Miniman Volina o H Position 50 Maximum Volume 100 g peas Power On Volume Last Internal Speaker Enable gt HDMI 1 Audio Port HDMI1 HDMI 2 Audio Port HDMI 2 Composite S Video Mode L R Position AV Exit SETUP Next lt gt Position AW JESU SIEaOLP Mans gt Component 1 2 Input Picture Temperature 6500 Clock 50 Phase 50 Channel Setup Auto Program ARC 16 9 a Signal Cable STD Mode Analog Only maan 2 Auto Program gt Channel Sequence Interleave A D Auto i Add Delete Channels gt a Additional Digital Signal None Clear Service Level gt Free Programmed Copy Service Level gt Basic Blank Parental Control gt Premium Blank gt Power On Channel gt Channel Lock Disabled weet ANY EAS Channel Memory Override Enabled Eo SETUR aE Position AW Position AV Internal Speaker Enable Exit SETUP Next lt gt Exit SETUP Next lt gt Speaker TV Disabled Composite Video Disabled Add Delete Channel Service Level S VIDEO Disabled P T Component 1 Disabled 3 Baale kae Component 2 Disabled S Prenian Blank HDMI1 Disabled HDMI2 Disabled PC ANAL
13. 5 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions many cause harmful interference to radio communications However there is not guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receive is connected Consult the dealer or an experienced radio TV technician for help Modifications Any changes or modifications made to this device that are not expressly ap proved by PDI may void the user s authority to operate the equipment Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Healthcare Grade Television The PDI Healthcare series television is specifically designed for installation and use in a healthcare environment The TV s special design and safety
14. Channels Each channel can be Enabled or Disabled for viewing Clear Service Erase the programmed channels from a Level service level Blank indicates an empty service level Selects the Free Service level to Clear Confirm Clear Confirmation Menu before clearing service level i Selects the Basic Service level to Clear Confirm Clear Confirmation Menu before clearing service level Premium Selects the Premium Service level to Confirm Clear Confirmation Menu before clearing service Clear level Copy Service Copy an existing service level to a desti Level nation service level levels 18 Document Number PD196 167R2 TV Menu Explanations continued Menu Item Explanation Sub ltem Explanation Paremal Cono Convel Access of TV ana moveco OO SSCS TV Rating Displays a list of parental TV viewing levels and allows for Blocking or Unblocking of TV content MPAA Rating Displays a list of parental Movie viewing levels and allows for Blocking or Unblocking of Movie content Advanced Rating Digital TV content Rating levels listing menu Advanced Rating Enable or Disable the Advanced Rating Option menu for digital TV content Change Password Displays a menu and allows creation of a new parental password Aux Block Sources Enable or Disable the Aux Block Source item to restrict program content inputted through the TV s auxiliary inputs Block Hours Sets the number of hours the parental lock is enabled P
15. OG Disabled FM RADIO Disabled Position AV Exit SETUP Next lt gt Position AW Confirm Auto Program Exit SETUP Next lt gt Confirmation gt Add Delete Channels Analog Channel 2 Add Delete Analog Channel Deleted Enable Disable Digital Channel gt Yes A Exit SETUP No V Position AV Enable Disable Digital Channels ee ee Reel 7 1 WHIO HD Enabled 7 2 WHIO WX Enabled 16 1 16HD Enabled 16 2 16Again Enabled 16 3 16 Life Enabled 16 4 16 Ohio Enabled 16 5 16DT Enabled 44 315 Enabled 77 7 Enabled 77 9 Enabled Position AV Exit SETUP Next lt gt Sample Channel Listing Shown for Illustrative purposes Actual Channel Listing will vary 14 Document Number PD196 167R2 TV Menu Navigation continued Clear Service Level Confirm Clear Programmed gt SETUP Service Level Free Picture gt Sound gt Channel Setup gt Features gt OSD Language English Source Setup gt EM Radio gt Position AV Exit SETUP Next lt gt Channel Setup Signal Cable STD Auto Program gt Add Delete Channels gt a Clear Service Level gt Copy Service Level gt Parental Control gt Power On Channel gt Channel Lock Disabled Channel Memory Override Enabled Position AW Exit SETUP Next lt gt Power On Channel
16. PDI Communication Systems 26 and 32 Healthcare LCD TV User Manual Models PDI CV2600 PDI CV3200 Document Number PD196 167R2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions WARNING Do not install this equipment in a confined space such as a bookcase or similar unit CAUTION Do not block ventilation openings Install in accordance with the manufacturer s instructions REGULATORY INFORMATION FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 1
17. an for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during light ning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 This appliance should be mounted to a wall or ceiling only as recommended by the manufacturer 16 Care should be taken so that objects do no fall and liquids are not spilled into the enclosure through NW OP WN openings 17 Ifan outside antenna or cable system is connected to the video product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code ANSI NFPA 70 provides information with respect t
18. arental Lock Enable or Disable the settings in the Pa rental Control menus Power On Channel TV displays a preset TV channel upon initial powering for each service level TV powers on to this set channel number Entering Last causes the TV to power on to the last channel viewed Basic TV powers on to this set channel number Entering Last causes the TV to power on to the last channel viewed Premium TV powers on to this set channel number Entering Last causes the TV to power on to the last channel viewed Channel Memory Override Enable means the TV will tune to all pos sible channels Disable means the TV can only be tuned to channels in the currently selected service level Channel Lock Enable or Disable the Channel Lock feature When Enabled the TV is locked to the last channel viewed Prevents the TV from being tuned to any other channel or source Disabled allows the TV to be tuned to other channels Features Power on Caption Sets the Caption mode TV when the Mode powers On Off TV powers on with captions disabled Last TV powers on in last caption setting Power TV will turn Off after a preset period of Management inactivity Default is Disabled Bed A B Set the IR code for patient remote controls for either Bed A or Bed B Bed A is the default setting Caption Text Mode Teletext can be displayed on screen Enabled Teletext turned on Disabled Teletext off NOTE Teletex
19. cian has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in safe operating conditions Cleaning amp Disinfecting e Unplug the TV Before Cleaning Use a soft damp cloth to clean Do not use harsh chemicals such as solvents e Wipe off water droplets from the cabinet and screen as soon as pos sible as they may leave spots Document Number PD196 167R2 IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrici
20. in Auto Programing or No Channel Down button to exit Auto Programming takes ap proximately 2 to 12 minutes Service Level Picture Sound Channels Features OSD Language Sources FM Radio Position AV Exit SETUP Channel Setup Signal Auto Program Add Delete Channels Clear Service Level Copy Service Level Parental Control Power On Channel Channel Lock a Channel Memory Override Position AV Exit SETUP English gt gt Cable STD gt Disabled Enabled Next lt gt a Mode a Channel Sequence Additional Digital Signal Free Basic Premium Position AV Exit SETUP Analog Only Interleave A D None Programmed Blank gt Blank gt Next lt gt Confirm Auto Program Confirmation Exit SETUP Document Number PD196 167R2 Pillow Speaker Sound Setup Proper setup of the TV s Sound is required for use with a wired Pillow Speaker Setup involves disabling the TV s internal speakers and then setting the audio level to the pillow speaker 1 Press the setup button on the handheld programming remote control 2 From the Setup menu select Sound 3 Inthe Sound menu select Internal Speaker Enable 4 Inthe Internal Speaker Enable menu select the source you wish to disable For television select TV 5 For Pillow Speakers with a thumb wheel volume con trol in the Sound Menu select Minimum Volume and set the
21. n AW Exit SETUP Next lt gt Digital Captions Mode Default Font Default Size Default FG Color Default Power On Caption Mode Last BGColor Default Auto Power On Disabled FG Opacity Default Power Management Disabled BG Opacity Default Bed A B A Caption Text Modes Disabled Digital Captions gt Digital Mode Time Setup gt Diagnostics gt Ea Channel Up Power Off Disabled a 7 Channel to other Sources Enabled RESELE Sel Power on ARC Mode Last Slot Standby Power Disabled Standby Power Low Digital Mode Time Stamp Position AV Time Zone Eastern Exit SETUP Next lt gt Daylight Savings On Source Setup TV Enabled No APO Composite Video Disabled S VIDEO Disabled Component 1 Disabled Component 2 Disabled HDMI1 Disabled Position AW HDMI2 Disabled Exit SETUP Next lt gt PC ANALOG Disabled FM RADIO Disabled Power on Source TV APO Auto Pi off if no video a Diagnostics Position AV Exit SETUP Next lt gt Field ON Hours 132 Field Powered Hours 265 IO Firmware VSN 3 6 Main Firmware VSN 2 90 Pro Idiom Support Mpeg 1 0 Bluethooth Firmware VSN 1 0 Exit SETUP FM Radio Setup gt Confirm FM Auto Program Auto Program gt Confirmation gt Frequency 100 7 MHz Add Delete Added Position AW Yes A Exit SETUP Ne
22. nt not specified for the product Product that has either the model number or serial number altered tampered with defaced or removed Initial installation and removal for repair Operational adjustments covered in the Owner s Manual normal maintenance and cleaning Damage that occurs in shipment due to act of God and cosmetic damage Signal reception problems and failures due to line power surge The cost for shipping the product to PDI s service center Accessories Batteries O00 SON DIR DS BS There are no expressed warranties except as listed above THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY HEREIN PDI SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT INCONVENIENCE LOSS OR ANY OTHER DAMAGES WHETHER DIRECT INCIDENTAL OR CONSEQUENTIAL RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY ALL EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts so these limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Refurbished products carry a separa
23. o proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of anten na discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure A NEC NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND W gZ 5 o lt S GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT 7 GROUNDING CONDUCTORS NEC SECTION 810 21 FIG A NOTE This reminder is provided to call the CATV system installer s attention to article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Document Number PD196 167R2 OPTIONAL ACCESSORIES The following optional accessories are available for your PDI Healthcare television Patient Remotes Programming Remotes ID QOO AD Of 0000 40D 00000 AD CV2600 Table Stand CV1003 San DA CV1001 PD108 420 PD108 421 PD108 427 CV1000 Not Pictured CV3200 Table Stand CV 1004 INSTALLATION LOCATION Locate a mounting position on the foot wall in front of the hospital bed Other l
24. ocations may be used depending upon the mounting means and room type Healthcare televisions are normally mounted near the ceiling to provide needed clearance A minimum 3 inch spacing is recommened for cooling Note Ceiling mounted fluorescent lights and windows may produce unwanted glare and should be considered when selecting a mounting location TV MOUNT The PDI Healthcare television utilizes a VESA pattern Selection of an appropriate mount will depend primarily upon the mount s capacity and intended functionality Install the TV as recommended by the mount s 400 mm manufacturer Please note the correct mounting screw CV3200 size requirements M6 Screws Required 200 mm PDI also offers compatible TV mounts Please refer to the installation instructions that pack with each mount for additional details PDI TV MODEL MOUNT MODEL CV2600 PD168 033 CV3200 PD168 204 Document Number PD196 167R2 PILLOW SPEAKER CONNECTIONS PILLOW SPEAKER STYLES Control of the TV is possible using either a single button Analog or multi button Digital style pillow speaker neither supplied with TV TV PILLOW SPEAKER WIRING The PDI Healthcare television series
25. ore Settings to TV item Save Settings to USB Download Firmware to TV RESTORE A TV S SETTINGS Information 1 Turn the TV On and insert the USB Flash Drive into the Cloning USB Slot located on the back of the TV A Cloning Main Menu will appear when the Card is properly installed 2 From the Cloning Main Menu select Restore Settings to TV Position AV Next gt Restore Settings to TV CV2600 gt CV3200 3 Inthe Restore Settings to TV menu select the appropriate model A confirmation menu will appear Position A V 4 Inthe confirmation menu select Channel Up for Yes to restore the Restore Settings to TV settings Otherwise press Volume Down to exit without restoring the TV s setting Restore Settings to TV from CV2600 tdf 5 The USB Flash can now be removed and the TV checked for cor rect programming 13 Document Number PD196 167R2 T e e V Menu Navigation a Standard Reddish SETUP Picture Greenish Service Level Free Brightness 50 Blueish Picture gt Contrast 50 User Sound gt Color 50 Channel Setup gt Tint 50 Features gt Color Temp gt OSD Language English Sharpness 5
26. ption Mode CHA V Selects the next or previous channel If a menu item is active selects the next or previous menu item VOLA V Increases or decreases the volume If a menu item is active adjusts the menu items settings POWER Turns TV On and Off TV Connections The PDI CV series televisions offer connection jacks for many different types of external devices such as DVD players Game Boxes and other similar devices Connections are located along the back edge of the Television TV Connectors m J 0 0100101020 itor a Addo ban Bese sesess ZBszezezeze abaew danog Document Number PD196 167R2 TV Connectors aw O ANT TV FM F Connector input jack for the hospital cable TV signal NOTE FM radio channels are also received on this input a MPEG4 Upgrade USB Port for service use only eea CLONING USB Port for cloning the TV The TV can be programmed cloned from information stored on a USB Flash Drive IN L R Component Left and Right audio input jacks IN Y PB PR Component Video input jacks IN Composite Composite Video input jack IN
27. resence of Proldiom option Mpeg4 Firmware Version of Mpeg4 decoder Bluetooth Firmware Firmware Version of Bluetooth decoder VSN Channel Up When Enabled the TV shuts off when it Power Off reaches the highest channel Channel to Other When Enabled the External sources Sources connected to the TV appear in the TV s channel listing If Disabled the External sources do not appear in the TV s chan nel listing Power on ARC The TV can be set to turn On with a Mode specific picture Aspect Ratio Last 4 3 14 9 16 9 and 16 9 Panorama Slot Standby Turns power On or Off to Slot 1 and Slot Power 2 accessory slots Standby Power Places TV in Low Standby Power or Normal Standby Power Mode OSD The menu system On Screen Display Language language settings are English Spanish and French 20 Document Number PD196 167R2 TV Menu Explanations continued Explanation Sub Item Explanation Se ee Source Setup The individual auxiliary in TV Disabled Enabled APO put connectors on the back Enabled No APO of the TV can be turned On or Off The source can also be set to Auto Power Off APO after 5 minutes of a no signal condition Composite Video Disabled Enabled APO Enabled No APO S VIDEO Disabled Enabled APO Enabled No APO Component 1 Disabled Enabled APO Enabled No APO Component 2 Disabled Enabled APO Enabled No APO HDMI 1 Disabled Enabled APO Enabled No APO HDMI 2 Disabled Enabled APO Enabled No APO
28. t is not readily available in North America 19 Document Number PD196 167R2 TV Menu Explanations continued Explanation Sub ltem Explanation Features Digital Captions Customize the look of captions when Font Size Default Small Standard Large tuned to a digital channel Foreground Color Default White Black Red Green Blue Yellow Magenta Cyan Background Color Default White Black Red Green Blue Yellow Magenta Cyan Foreground Opacity Default Solid Translucent Transparent Flashing Background Opacity Default Solid Translucent Transparent a Flashing Default White Black Red Green Blue Yellow Magenta Cyan Edge Style Default None Raised Depressed Uniform Left Drop Shadow Right Drop Shadow Digital Mode Timing information provided by Digital Time Zone Sets the current Time zone to Newfoundland Time Setup channels can be set to the specific Time Atlantic Eastern Central Mountain Pacific Zone and also Daylight Savings Alaska Hawaii Diagnostics A display menu that provides a readout Field ON Hours of the TV s internal operations Field Power Hours Turns Daylight Saving On Off or set to Auto detect Readout of the number of hours the TV has been turned On Readout of the number of hours the TV has been plugged into a powered outlet IO Firmware VSN IO firmware version resident inside the TV Main firmware version resident inside the TV Pro ldom Indicates p
29. te warranty This warranty does not apply For details of refurbished product warranty please refer to the refurbished product warranty information packaged with each refurbished product PDI Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 PH 937 743 6010 FX 937 743 5664 23 Document Number PD196 167R2
30. tup button on the remote 2 From the Setup menu select Channels 3 Inthe Channels menu select Signal Set the signal to one ap propriate to your healthcare facility The possible choices are Cable STD Standard Cable TV Cable IRC Incrementally Related Carrier Cable HRC Harmonically Related Carrier Air Air Antenna 4 Inthe Channels menu select Auto Program 5 Inthe Auto Program menu select Mode The TV can be set to search and locate different styles of TV signals Analog Only Digital Only or both Analog and Digital channels Select the style of signal 6 Inthe Auto Program menu select Channel Sequence and select the manner in which channels are viewed The possible selections are Interleave A D All A then D Analog and Digital appear grouped together Analog appear first followed by Digital 7 The Additional Digital Signal selection allows for auto pro gramming of a second block of channels using a different signal type For example first Auto Program the TV for CATV STD signals then use the Additional Digital Signal set to AIR provides a second auto programming of air type signals to be included in addition to the channels found during normal Auto Program searching into the same Service Level 8 The TV offers 3 discrete groups of channels or Service Levels Free Basic or Premium can each be programmed and used as needed Select the desired Service Level to program 9 Press the Yes Channel Up button to beg
31. xt lt gt Exit SETUP No V 16 Document Number PD196 167R2 TV Menu Explanations Explanation Sub ltem Explanation fe ee eS Service Level 3 programmable Service Levels banks of channels plus a Disable service level Picture Adjusts picture appearance Brightness Adjust the brightness of the dark areas in the picture 50 is the default value Contrast Adjust the brightness of the light areas in the picture 50 is the default value Color Adjust the strength of the color in the picture 50 is the default value Tint Adjust the tint of the picture 50 is the default value Color Temperature Opens a sub menu that provides adjustment to the color balance of the picture Sharpness Adjust the amount of detail present in the picture 50 is the default value PC Analog HDMI Picture Opens a sub menu that provides adjustment to the picture when the TV is used in computer mode Temperature Color warmth of picture Clock Adjust the horizontal screen size Phase Removes horizontal noise ARC Selects the screen size ratios H Position Move Picture left or right V Position Moves Picture up or down Auto Automatically adjust picture Component Input Picture Opens a sub menu that provides adjustment to the picture when viewing a component signal Temperature Color warmth of picture Clock Adjust the horizontal screen size Phase Removes horizontal noise ARC Selects the screen size ratios H Position
Download Pdf Manuals
Related Search