MANUAL FOR USE AND MAINTENANCE
Contents
1. e The warranty will be invalidated if the equipment were to be modified or adapted to technical and safety standards different from those prevailing in the country for which the product was designed and built The warranty does not cover damage resulting from fire water natural phenomena or anything else due to a lack of care of the equipment when in use or not Warranty repairs will be performed only if the defective product will be presented within the warranty period together with the original bill of sale Albrigi Luigi srl reserves the right to refuse warranty repair in the absence of these documents or in the event that the information contained in it is incomplete or illegible This guarantee will not apply if the model or serial number found on the product has been altered deleted removed or made illegible For any dispute the competent Court of Verona Italy WWW BEBEER IT pg 4 MALT MILL M50E MANUAL FOR USE AND MAINTENANCE ALBRIGI ENGLISH EXCLUSIONS a Periodic maintenance and repair or replacement of parts due to wear and tear b Damage or defects caused by using operation or improper handling of the product for other purposes than the initial ones c Damage or changes in the product resulting from e Treatments causing damage or alteration in physical esthetics or surface of the product e Improper installation or use of the product for other purposes than those provided or failure to follow instructions A2. CEO i Wiig WWW BEBEER IT pg 2 MALT MILL M50 MANUAL FOR USE AND MAINTENANCE PASTE ENGLISH amp INDEX DECLARATION OF CONFORMITY nnn 2 TECHNICAL FEATURES SPARE PARTS 3 INTRODUCTION AND CONSULTATION GUIDE 4 IDENTIFICATION NOTES AND WARRANTY 4 EXCLUSIONS AND USING THE MACHINE 5 SAFETY RULES eed a el uct R 5 CONTROLS AND TIPS BEFORE STARTING We 6 FAULTS PROBLEMS SOLUTIONS nnn 6 MAINTENANCE eci 7 SAFETY LABELS 8 SETTING THE ROLLERS DAP 8 MACHINE DEMOLITION AND DISPOSAL 8 SPECIFICATIONS SIZE OF THE MILL Width 380mm Net Weight 10kg Length 430mm Power consumption max 120 W Height 230mm Materials stainless steel aluminum SPARE PARTS B0332 Driving knurled roller B0333 Neutral knurled roller WA044 Stainless steel screw M6 x 20 B0337 Loading hopper 2kg Loading hopper 5kg MR025 Gearmotor EV700 N2 50 B0342 Motor joint CA014 Bearing GFM 1416 10 WWW BEBEER IT pg 3 MALT MILL M50E MANUAL FOR USE AND MAINTENANCE ALBRIGI ENGLISH INTRODUCTION This manual is an integral part of the machine and contains the information necessary for its operation and maintenance Please read it carefully and follow the instructions The manual must be always at hand to be consulted by the operator We suggest to contact the Manufacturer for any information spare parts or accessories AN symbol indicates the MOST DANGEROUS SITUATIONS OR OPERATIONS This symbol indi
3. mill Use a damp cloth Before any maintenance or inspection clean the work area and always use gloves and work tools suitable and in good condition After any maintenance or checks reset the machine guards TABLE OF PERIODIC MAINTENANCE At the end of each use It is advisable to wipe the flour from the mill Every 10 hours of work Check the locking screws Every 50 hours of opera Check the wear of the cylinders tion Check that the power cord is in good condition Every 200 hours of ope Clean the mill with compressed air particularly inside the crankcase of the engine ration WW W BEBEER IT pg 7 MALT MILL M50 MANUAL FOR USE AND MAINTENANCE ALBRIGI ENGLISH SAFETY LABELS As with the identification label of the machine the safety labels must be kept clean and in good condition If necessary it is recommended to replace them with the original ones by requesting from the manufacturer Before using the mill wear a face shield Wait until all machine components have completely stop before touching them Read the operating manual before starting the machine ADJUST THE DISTANCE BETWEEN ROLLERS Wait until all machine components have completely stopped and disconnect the power cord before performing this operation 1 Relase the rollers locking knobs 2 Turn on the bushings Oto adjust the distance between the rollers 3 Tighten the rollers locking knobs 1 SET AS
4. positioned Place the mill on a solid flat on a solid support surface Excessive vibration Break of engine support Replace the engine mount The replacement of the piece must be performed by qualified personnel The cylinders were not Ensure that cylinders properly secured are securely fastened by tightening the locking screws Theproduct nasuot Wear of grinding cylinders Replace the grinding The replacement of the ground E cylinders piece must be performed by qualified personnel The grains are too wet Clean the mill and grind dry products WWW BEBEER IT pg 6 MALT MILL M50 MANUAL FOR USE AND MAINTENANCE ALBRIGI ENGLISH ds PROBLEM SOLUTION INSTRUCTIONS The mill is not properly Make sure that the electrical connected to the power outlet is properly seated and then try the ignition the screws of the motor Tighten the screws of the shaft are loosened motor shaft The mill does not work Motor short circuit Replace the motor The replacement of the piece must be performed by qualified personnel Power pack out of order Replace the power pack The replacement of the piece must be performed by qualified personnel MAINTENANCE The maintenance operations must be performed by qualified personnel in strict compliance with the instructions in this manual Before any maintenance switch off the engine and remove the plug from the power outlet Do not use water to clean the
5. A MALT MILL ALBRIGI M50 MANUAL FOR USE AND MAINTENANCE SR ENGLISH ALBRIGI LUIGI srl costruziont IN acciaio mox Via Tessare 37023 Stallavena VR Italy Tel 39 045 86 50 250 Fax 39 045 90 73 16 Mail info albrigiluigicom BEBEER IT MALT MILL M50 MANUAL FOR USE AND MAINTENANCE ALBRIGI ENGLISH ds DICHIARAZIONE DI CONFORMIT DECLARATION OF CONFORMITY La societ ALBRIGI LUIGI S r l via Tessare 1 37023 Stallavena VERONA The company ALBRIGI Luigi Srl via Tessare 1 37023 Stallavena VERONA DICHIARA SOTTO LA PROPRIA RESPONSABILIT DECLARE UNDER HIS OWN RESPONSIBILITY Che la macchina denominata Mulino M50E That the machine called M50E Descrizione vedere il presente manuale Description see this manual Anno di produzione 2014 Year of production 2014 CONFORME ALLE DIRETTIVE COMUNITARIE INERENTI ARE IN COMPLIANCE WITH THE FOLLOWING DIRECTIVES Direttiva Macchines Machinery Directive aaa 2006 42 CE Direttiva Compatibilit Elettromagnetica EMC Directive sss sese essen 2004 108 CE Diretiva Bassa Tensione Low Voltage Directive sssssssssssscsssssssscnsesssecssesscnsesssseneeeeneeese 2006 95 CE AND WITH THE FOLLOWING RULES Regole per QE ules For Electrie Cabinet nic EN 61439 1 Regole per Q E di potenza Rules for Power Electric Cabinet sese EN 61432 2 Progettazione Elettricay Electrical DESIGh aata ataa iaa Taanon EN 60204 1 Albrigi Luigi Amministratore unico
6. IDE At the end of the season or in the case of long periods of inactivity you must e Thoroughly clean both the inside and the outside of the machine e Check and if necessary replace damaged or worn parts Tighten all bolts e Cover the machine after it has been stored in a closed and secure environment Finding the machine in perfect condition to the resumption of the work is in the interest of the user DISPOSAL OF THE MACHINE The European Directive 2002 96 EC on waste electrical and electronic equipment WEEE requires that old appliances are not disposed using the normal solid urban waste Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment The crossed out dustbin is marked on all products to remind their obligations regarding separated waste collection For more information on the proper disposal of household appliances owners should contact their local authority or retailer WWW BEBEER IT pg 8
7. cates a VERY IMPORTANT NOTE OR RECOMMENDATION All safety rules are important and must be strictly observed IDENTIFICATION NOTES The label identifying the machine that contains all your data is located see illustration It is recommended that the identification label with the hazard symbols are always visible and in good condition If necessary it must be replaced with other original request by writing to the manufacturer GENERAL CONDITIONS OF WARRANTY z This product built by Albrigi Luigi Srl is warranted against defects in materials and workmanship for a period of 24 months from the original date of purchase indicated on the transport document or unless otherwise indicated on the documents issued by the manufacturer and signed by both parties In the case of repair or replacement operations the equipment must be reported at the headquarters of Albrigi Luigi Srl Albrigi Luigi Srl reserves the right to replace the defective products or components with new or reconditioned parts or products All products and parts replaced become property of Albrigi Luigi Srl SPECIAL CLAUSES e The guarantee will not apply if the malfunction or breakdown of the device or its component will be caused by improper use as indicated in the user manual The warranty does not cover expenses or damages caused by repairs or attempted repairs performed by other companies or individuals outside of Albrigi Luigi Srl or persons authorized by it to do so
8. lbrigi Luigi srl on the installation and use e Improper maintenance of the product not in accordance with the instructions of Albrigi Luigi srl on proper maintenance e Negligence USING THE MACHINE The mill M50E is validly used for grinding barley malt wheat and other cereals The result is a high quality product suitable for the production of beer The mill can be plugged into any household power outlet single phase 220V 50Hz Make sure the switch is in the OFF position before plugging in Never use the mill to grind shrubs plastic or iron Never allow the engine to overheat Use the mill for up to 30 min 1 hour continuously depending on how the engine is put under stress Allow engine to cool for 10 15 minutes before starting to grind The particle size of the product is regulated by appropriate bearings fixed by the locking screws The yield of the machine depends on the type of malt used and the particle size of grinding Under standard conditions the yield is 55kg hour The use of the mill is forbidden to minors Any unauthorized modification to the machine may absolve the manufacturer of liability for any resulting damage ka Before using the mill you need to wear dust mask gloves and face shield Use the mill only in well ventilated areas SAFETY RULES In order to avoid injury it is necessary to pay attention to the safety instructions on the labels attached to the machine Stop the engine as soon as i
9. t has finished grinding mill engine rpm increases Any cleaning or maintenance must be performed with the engine off and plug disconnected Make sure all guards are fitted and undamaged Remember that a prudent operator is the best insurance against any injury WWW BEBEER IT pg 5 MALT MILL MS50 MANUAL FOR USE AND MAINTENANCE ALBRIGI ENGLISH ds Do not use the mill in the rain or in very humid environments or in the presence of flammable gases or liquids Do not use the mill with wet hands Allow the machine to cool before performing any maintenance Before use place the mill on a solid stable surface and ensure that all parties are undamaged and correctly fitted After use turn off the engine immediately and pull off the plug Do not introduce other foreign matter outside of the cereals WARNING Risk of crushing The mill is equipped with rotating cylinders and electrical parts Do not insert your hands into any slot of the mill while it is running or connected to the power outlet CONTROLS AND TIPS BEFORE STARTING Each mill is tested before it is put on the market The following checks must be carried out with the plug disconnected e Check the attachment of the cylinders e Fill the hopper with the product to be ground before starting the mill Make sure the hopper is never empty Turn off the mill as soon as you finish grinding FAULTS PROBLEMS SOLUTIONS PROBLEM CAUSE SOLUTION INSTRUCTIONS The mill is not
Download Pdf Manuals
Related Search