FGH 710 A1 - Lidl Service Website
Contents
1. 3 Plug the tool into the mains 4 Hang the extension cable onto the belt clip 12 and fasten it to your i trouser belt 5 To switch on press the safety re e lease catch 17 and then squeeze the dead man lever 18 Release the safetv release catch 17 The tines 11 will begin to ro tate and dig themselves into the earth 6 To switch off release the dead man lever 18 Walk the tool through the soil at normal pace and in a line as straight as possible Always work away from the mains socket Make sure that the cable is kept well away from the working area Hanging the cable into the belt clip included in the package will help Overload protection The mo tor will cut out immediately if overloaded The tool cannot be used until it has completely cooled down again GB CED Cleaning maintenance storage Warning Always return the tool to the service centre for work not described in the manual Only use original parts A Switch the tool off unplug it from the mains and wait for the tines to EX stop moving before carrying out any maintenance or cleaning work on en the tool Perform regular maintenance and clean ing on the tool This will ensure long reli able service General cleaning and mainte nance work Do not spray the tool down with wa A ter especially not under pressure and do nat clean it under running water Wear protective gloves whe2. e Keep the tool in a dry place out of chil dren s reach e Be careful in handling the tool Keep the tines sharp and clean to improve its working safety and effectiveness Follow the maintenance regulations Electrical safety Warning Do not use the tool if the mains or extension cable is dam aged danger of electrical shock e Keep the mains cable away from the tines Always trail the mains cable be hind you or the person operating the tool If the cable becomes damaged during use immediately disconnect it from the mains Never touch the mains cable before unplugging it from the mains GB IE Make sure that the mains voltage matches the data on the tool s rating label If possible connect the tool to a socket with a residual current RC trip switch at a triggering current of not more than 30 mA Avoid skin contact with earthed ob jects such as metal fences and posts Make sure that the connector on the extension cable is protected from splash water and is made of rubber or has a rubber covering Only use extension cables that are intended for outdoor use and are labelled as such Use extension cables with a cable core diameter of at least one square millimetre Always completely unwind the cable reel before use Check the cable for damage e Use the cable hanger fitted for the purpose when using an extension ca ble Do nat carry the tool by the cable Do not unplug the cable by tuggin
3. ply extra weight and do not drag the tool over hard surfaces such as tiles or steps Stopping work Warning The tines will continue A to turn for a few seconds after vou switch the tool off Wait until thev have stopped moving injury haz ard Do not lift or transport the tool while the motor is running Turn the tool off and wait for the tines to stop mov ing then disconnect the tool from the mains before changing the area you are working on e Never leave the tool unattended where you were using it e Switch the tool off wait for the tines to stop moving and disconnect the tool from the mains under the following circumstances Always before leaving the tool Before removing remnants of soil and plants When the tool is not in use Before you conduct maintenance or cleaning work on the tool 6 florabest If the mains cable is damaged or caught up If the tool collides with an obstacle or starts to vibrate in an unusual manner In this case examine the tool for damage and have it repaired if necessary e Use the tool away from flammable fluids or gases Failure to do so may result in fire or explosion Maintenance and storage Make sure that all nuts bolts and screws are tight and that the tool is in safe working order Do not attempt to repair the tool your self unless you are qualified to do so Return the tool to our service centre to carry out any work not listed in the user manual
4. a safe place and pass it on to any subsequent owner to en sure that the information contained therein is available at all times LLI Safetv notes This section deals with the basic safetv regulations while working with the electric tiller Svmbols Svmbols on the tool A AO LA Warning Read the user manual Warning Protect from rain and damp Danger of injury from objects spinning off Keep surrounding persons away form the hazard area Warning Switch off the tool and disconnect it from the mains be fore carrying out any cleaning or maintenance work gt d j Danger from damaged mains cable Keep mains cables away from tines i gt Danger of injury from rotating parts The tines will continue to rotate after the tool has been switched off Wait for them to stop moving e gt Sound power level L in dB 5 e 8 Safetv class ll Do not dispose of electrical equip ment in household waste a A 4 florabest Symbols in the manual i Warning svmbols with informa tion on damage and injurv pre vention Instruction svmbols the instruction is explained at the place of the ex clamation mark with information on preventing damage i Help svmbols with information on improving tool handling General safetv notes i Warningl Improper use of this tool mav lead to serious injurv Read this instruction manual carefully before y
5. such as firm footwear with non slip soles and strong long trousers Do not use the tool barefoot or wearing open toed sandals To prevent injury from the tines only switch the tool on in its working posi tion Examine the tool beforehand every time you use it Do not use the tool when the safety components such as the power safety catch or guard cut ting parts or bolts are missing worn or damaged In particular check the mains cable and dead man lever for damage Only replace damaged bolts or tines in complete sets to prevent imbal ance Only use replacement and accessory parts delivered and recommended by the manufacturer Using foreign parts will immediately lead to loss of guar antee 5 GB CED Working with the tool Keep your hands and feet away from the tines while working es pecially when starting up the tool injury hazard e Observe any noise prevention regu lations and local by laws Using the tool may be limited or prohibited on certain days such as Sundays or pub lic holidays or during certain times of the day midday at night or in certain areas such as at health spas and hospitals Do not use the tool to chop up stones or till lawn soil as such use may dam age the tool Do not use the tool in rain foul weather or damp surroundings such as near garden ponds or swimming pools Only use in daylight or good lighting conditions e Be sensible Do not use the tool if you a
6. N 709 A4 2009 EN 60335 1 A13 2008 7 EN 62233 2008 EN 55014 1 2006 EN 55014 2 A2 2008 7 EN 61000 3 2 2006 7 EN 61000 3 3 2008 We additionally confirm the following in accordance with the 2000 14 EC emissions guideline Guaranteed sound power level 93 0 dB A Measured sound power level 89 3 dB A Compliance evaluation process carried out in accordance with Appendix VI 2000 14 EC Registered Office T V S d NB 0036 Grizzly Gartenger te GmbH amp Co KG K Am Gewerbepark 2 D 64823 Gro Umstadt 25 01 2012 TITTI Documentation Representative 14 florabest informative Exploded Drawing florabest 15 16 florabest Service Center Service Great Britain Tel 0871 5000 720 0 10 Min E Mail grizziy lidl co uk IAN 68654 Service Ireland Tel 1890 930 034 0 08 EUR Min peak 0 06 EUR Min off peak E Mail grizzly lidl ie IAN 68654 2011 11 11 rev02 op IAN 68654 Grizzly Gartenger te GmbH amp Co KG Am Gewerbepark 2 D 64823 Gro Umstadt Last Information Update 11 2011 Ident No 76005541112011 6 02 11 11 12 59 68654 To Gartenkultivator FGH710A1 Cover LB6 indd 19
7. Tiller Motor power input 710 W Mains voltage ee en 230V AC Mains frequency en 50 Hz Safety ClASS cia a a II Degree of protection IP24 Working width ssec 360 mm Max working depth max 180 mm Number of tine wheels 4 Nominal rotation rate Approx 230 rpm Weight 4 2 2 eek 7 85 kg Acoustic pressure level LpA is 69 3 dB A KpA 1 41 Measured sound power level LwA canina 89 3 dB A KwA 1 41 Guaranteed sound power level diia leia ip 93 dB A Vibration at hand grip an BE EEE DARAN 2 7 m s K 1 4 m s Noise and vibration values have been de termined according to the standards and regulations named in the declaration of conformity Technical and optical alterations may be made without notice for the purposes of improvement No guarantee can be given for the accuracy of dimensions notices and specifications stated in this manual The manufacturer shall therefore not ac cept liability for statutory claims arising from the manual 12 oar Translation of the original GB CE EC declaration of conformity We hereby confirm that the FGH 710 A1 series electric tiller Serial number 201110000001 201112074628 conforms with the following applicable relevant version of the EU guidelines 2006 42 EC 2004 108 EC 7 2000 14 EC In order to guarantee consistency the following harmonised standards as well as national standards and stipulations have been applied E
8. ered by guarantee Such components particularly include tines e Guarantee service is also conditional upon compliance with cleaning and maintenance instructions Any damage caused by faults in ma terials or manufacturing shall be rem edied by free repair or replacement e You may have repairs not covered by guarantee carried out for a charge at our service centre Our service centre will be pleased to supply you with a cost estimate We can only process orders on tools sent in with adequate postage and packing e Tools sent in by express measure ment cargo or other special forms of postage with freight collect will be refused e We will dispose of tools free of charge Replacement parts Use the service address or fax number supplied to order replacement parts Make sure you include the order number in your order Set of tines Right left Order No 30261000 Please contact our service address for all other replacement part numbers d GB CE Disposal environmental protection Be environmentally friendly Return the tool accessories and packaging to a recy cling centre when you have finished with them B Do not dispose of electrical appli ances in household waste Return the tool to a recycling centre The plastic and metal parts used can be sepa rated and sorted for recycling Ask our service centre for details Technical specifications FGH 710 A1 Electric
9. g on it Keep the cable away from heat oil and sharp edges e Ifthe power cable for this equipment is damaged it must be replaced with a special power cable which is avail able from the manufacturer or a cus tomer service agent of the same Functional description Your hand operated garden tiller is equipped with a maintenance free electric motor and a gearbox with sump lubrica tion The tool is fitted with four rotating tine wheels that automatically dig themselves into the ground The aluminium frame can be folded to aid storage Please refer to the following descriptions for the function of the controls 7 The major functional parts are shown on the foldout pages Functional parts 1a Right hand fork grip with dead man lever safety release catch and cable tension relief 1b Left hand fork grip 2 Mains cable 4 Plastic cross plate 5 Twocentral tubes 6 Frame tubing 3a Large cable clip 3b Small cable clip 7 Vent 8 Motor housing 9 Gearbox 10 Driveshaft 11 Tines 12 Belt clip Intended purpose The tool is intended for breaking up and tilling coarse soil for the purpose of mixing in fertiliser peat and compost in domestic areas Any use other than that specifically named in this manual may lead to dam age to the tool and represents a serious injury hazard for the operator The operator or user of the tool is respon sible for any damage or injury caused to other persons or property Th
10. is tool is intended for use by adults Children and persons unfamiliar with the manual must not be allowed to use the tool Do not use the tool in rain or damp surroundings The manufacturer shall not be held liable for damage arising from improper use or incorrect operation of the tool Assembly instructions Hd Always disconnect the tool from the mains before conducting any work gt a 0 on it Scope of delivery Carefully remove the tool from the pack aging and check that the following parts are complete e Motor housing with tines and frame tubing e Right hand fork with dead man lever and permanently fixed mains cable e Left hand fork grip e Plastic cross plate with cable guide e Assembly tools cable clips and belt clip e User manual While assembling the tool make D sure that the mains cable does not become caught and has enough slack Fitting the grip tubing 1 Push the two fork grips 1a 1b into the plastic cross plate 4 and screw the plate into the cor responding holes in the grip tub ing from behind using the bolts provided 13 2 Screw both central tubes 5 onto the fork handles 1a 1b To do this push the enclosed screws 14 inwards through the holes from the outside and screw them in place with the wing nuts 15 3 Position the handle rod with the pipe ends to the left and right on the lower frame tubing 6 and screw it in place with the en closed screw
11. n carry ing out maintenance and cleaning work on the tool to avoid injury from cuts A O Always clean the tool thoroughly after each use Always keep the tool clean Do not use cleaning fluids or solvents e Remove any soil and dirt residues stuck to the tines driveshaft tool surface and vents with a brush or dry cloth Spray or rub biodegradable oil into the tines e Clean soiled grips with a damp cloth e Always check the tool for obvious damage such as loose worn or dam aged parts before using it Check that all nuts bolts and screws are tight e Check the covers and guards for dam age and correct fit Change them if necessary We shall not be held responsible for any damage caused in any of the following ways Improper repair Use of non original parts Use other than for the intended pur pose Changing the tines The tool is fitted with four tine wheels that can easily be changed in pairs Both of the tine wheel pairs can be fitted on the left or right as required Always change both tine pairs at the A same time to avoid damage to the tool from imbalance Switch the tool off unplug it and wait for the tines to stop turning d A Pet Unscrew the hex bolt 19 and the self locking nut 20 on the tine wheel pair 11 2 Slide the tine wheel pair off the shaft 10 3 Clean the driveshaft with biological oil 4 Slide the new tines onto the driveshaft wi
12. ou start working with the tool and familiarise yourself with its controls Keep the manual in a safe place and pass iton to any subsequent owner to ensure that the information it contains is always available Remember the user is responsible for accidents involving other people or their property Please read the following safety guidelines in order to avoid risk of fire electric shock personal injury and damage to objects Preparation The equipment is to be used only by people who are adequately trained For safety reasons do not allow children or young people under 16 or anyone not familiarised with this instruction manual to use the tool GB CED This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been giv en supervision or instruction concern ing use of the appliance by a person responsible for their safety Children must be supervised in order to ensure that they do not play with the equipment Never use the tool while others espe cially children or pets are close by Familiarise yourself with handling the tool and pay attention to all possible dangers that may be overheard while working with the tool Check the terrain on which you will be using the tool and remove stones sticks wires or other foreign objects that may be caught up and spun off Wear proper working clothes
13. re tired or easily distracted or after the use of alcohol or medicines Take a break as soon as you need one Make sure that you are standing firmly when using the tool especially on slopes If working on a slope work along the slope not upwards or down wards Be particularly careful when changing direction on the slope Do not use the tool on excessively steep slopes e If there is any danger of slipping on sloped ground have a second person secure the tool with a rod or cable The second person should stand up the slope at a safe distance from the tool Always hold the tool securely in both hands while working with it e Make sure that the grips are dry and clean Be careful while moving back wards danger of tripping over e Take particular care when turning or raising the machine e H the chopping knife is blocked by a foreign body switch off the equipment and disconnect at the plug Remove the foreign body e g root before re starting the equipment Do not use the tool if it is damaged incomplete or altered without the ap proval of the manufacturer In particu lar do not work with the tool if guards or protection fittings are damaged or missing e Do not overload the tool Only work in the performance range stated Do not use tools that do not have sufficient power for heavy jobs Do not use the tool for any use other than that intend ed by the manufacturer Avoid damage to the tool Do not ap
14. s 14 and wing nuts 15 8 florabest GB IE When assembled correctiv the Warning The tines will continue handle ends point away from the to turn for a few seconds after equipment front with the ventila the tool has been switched off tion slits see 7 Do not touch the rotating tines injury hazard 4 Fasten the mains cable with the cable clips supplied Operating instructions Large cable clip 3a above the cross plate Always keep a firm grip on the Small cable clip 3b at the A tool with booth hands and watch frame tubing vour feet The tines mav cause an acci _ dent Operation Be careful while moving back wards danger of tripping Observe noise abatement laws and local by laws A Do not touch the gearbox as it IN may become hot during opera Switching on and off tion danger of burns d Note Before switching the tool on make sure that the tool is not touching any other objects and hold it firmly in both hands 1 Plug the tool into the extension ca To avoid damage to the tool Never lift or drag the tool with the motor running Lift the tool while moving it over hard surfaces such as tiles or steps ble A 2 Loop the end of the extension ca Switch the tool off after working with ble and hang it onto the cable ten f F it and for transport disconnect from sion relief 16 to ease the tension the mains and wait for the tines to on the cable gt stop moving
15. th the holes on the axles aligned to the holes on the driveshaft 21 Make sure that the tines are set to their proper turning direction The arrows on the gearbox and tines should point the same wav No 22 10 florabest 5 Slide the hex bolt through the hole and tighten on the self locking nut supplied with each new tine wheel pair 23 Storage e Leave the motor to cool down before you put the tool into a closed space e Keep the tool clean dry and out of the reach of children Do not cover the tool in plastic bags as moisture may form Unscrew the wing nuts and fold the fork grips down to reduce the space taken by the tool Make sure that the cable does not be come jammed e The frame tubing also serves as a hook to hang up the tool at the place of storage Do not use the tool with the han dle folded closed Guarantee e This tool is subject to a guarantee period of thirty six months A shorter guarantee period of 12 months shall apply for commercially used and re placement tools according to statutory regulations If you have a justified guarantee claim please contact us at our service centre see last page for our telephone number fax number and e mail address We will then give you the details on the claims procedure GB IE Damage caused by natural wear overload or improper use is not cov ered by guarantee Certain compo nents are subject to normal wear and are not cov
16. u MEN FGH 710 A1 DIO Garden Cultivator Translation of original operation manual 6C 68654_flo_Gartenkultivator_FGH710A1_Cover_LB6 indd 20 PN 02 11 11 12 59 lo BB ji DD Before reading unfold the page containing the illustrations and familiarise yourself with all functions of the device Translation of original operation manual 68654 _f o_Gartenkultivator_FGH710A1_Cover_LB6 indd 21 CI 02 11 11 12 59 GB CED Contents Safety notes SYMbONS sacs General safety notes 5 Functional description 7 Functional parts unensnsnnneeennnnnnnnnnnnn 8 Intended purpose ununsnnsnnnnnnnnnnnnnnnnnnnn 8 Assembly instructions Scope of delivery en Fitting the grip tubing Operation Switching on and off Operating instructions Cleaning maintenance storage 10 General cleaning and maintenance WO ia a 10 Changing the tines 0 10 MA ia eee ieee Guarantee Replacement parts Disposal environmental protection 12 Technical specifications 12 Translation of the original EC declaration of conformity unneeessnnnnnnnennnnnnnnnnnnnnnnn nen Exploded diagram Service Center nn Before first using the machine please read this instruction manual carefully for your own safety and for the safety of others Keep the manual in
Download Pdf Manuals
Related Search