INSTALLATION AND USER MANUAL
Contents
1. a fully independent certification body once or twice a year The certification body Dansk Vindues Certifice ring DVC controls that the quality procedu res and products live up to the requirements stipulated in the Technical Requirements for DVV worked out by experts from The Associa tion of Danish Window Manufacturers and The Danish Technological Institute Read more www dvc vinduer dk CE Marking As from February 1st 2010 CE marking of windows and external doors is mandatory The CE mark proves that the procedures and standards stipulated under the Construction Product Directive are observed by the manu facturer CE marking sets out the requirements for fabricating window and external pedestrian door sets and includes classifications acou stics ventilation test methods production control and performance characteristics such as weather tightness giving guidance for both the systems company and the fabricator in the design fabrication and installation of windows to approved standards Hvidbjerg Vinduet a s 8 TESS stergade 24 e 7790 Thyholm g Tlf 9691 2222 e Fax 9691 2233 D Hvidbjer www hvid bjergvinduet com Maintenance free Windows and Doors mALUX 20 CERTIFICATIONS CE MARKING El Hvidbj f stergade 24 e DK 7790 Thyholm e Danmark 2010 EN 14351 1 2006 A1 2010 Windows timber aluminium Type Alux Used in homes and business buildings Resistance to wind load npd Water tigh2. is essential to lubricate and maintain all types of ironmongery to ensure easy and smooth operation and function and to uphold the warranty on the elements We recommend that all moveable parts are lubricated at least once a year with acid free oil Especially in coastal areas with salty air and in areas with high air pollution the ironmongery must be lubricated and maintained more often in order to ensure smooth operation and to uphold the warranty Top guided top swing side swing and side hung are all hinge systems and all joints and hinges must be lubricated The joint should be lubricated on the outside and in the crack between the arms Use acid free oil followed by a long lasting acid free grease in spray form Sliding surfaces hinge sliders and sliding blocks should be maintained in a clean state to facilitate sliding It is possible to apply stearin or a dry lubri cation product to facilitate sliding Never use oil on the surfaces Friction brakes on side hung windows and terrace doors should be kept clean Friction brakes for side hung windows and terrace doors are not normally lubricated but can if necessary be treated with a dry lubrication product Tilt and turn ironmongery All hinges side bolts and receiver striking plates should be lubricated with acid free oil The bottom hinge should not be lubricated since is has been filled with grease when fitted Scissor ironmongery and friction brakes are lubricated in all jo
3. no influence on the durability of the product since a natural oxide film quickly forms on exposed alumi nium preventing corrosion and white rust attacks Especially in costal areas with salty air and industrial areas with high traffic intensity and air pollution the outer aluminium sash and frame may be effected by the surroundings and it is essential to clean the surface frequently and at least twice a year Weatherstrips Weatherstrips do not require any special maintenance but should be kept clean and free of dirt This can be done by wiping them once a year with a well wrung cloth Furthermore we recommend that the weatherstrips are brushed with a silicone stick to minimize friction during operation NE EE SS Hvidbjerg Vinduet a s m E VINDUET stergade 24 e DK 7790 Thyholm g Tel 45 9691 2222 e Fax 45 9691 2233 D Hvidbjer a e e Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors mALUX 10 MAINTENANCE Resin lumps and discoloration from knots All our wooden profiles are produced from finger jointed timber in order to obtain the best quality In the process 95 p c of all knots and other defects of the timber is removed This makes the wooden profiles more stable and problems with discoloration from knots and resin lumps are nearly iliminated Wood is however a living natural po material with many advantages l e and minor disadvantages WT Resin and knots indicate quality of the woo
4. ED Wedging must be placed under both wooden and composite pro file For elements with vertical mulli ons and closing sashes permanent wedging should always be placed under the bottom frame Permanent wedging should always be placed at each fixing point on the hinge side close to the hinges and behind the striking plate in order to prevent burglaries as well as under the mullion wing joint un derneath the sill for 2 leaf doors Fixed glass Elements with fixed glass or sash are fixed through the wooden part of the element Tilt turn Tilt turn elements are also fixed through the wooden part of the element Top guided top swing and side hung windows Fixing with frame bolts in outward opening elements must always be done through the composite profile as close to the hinges as possible Doors Inward opening doors are fixed through the wooden rebate I Outward opening doors are fixed according to similar principals as outward opening windows Inward opening door side and top frame PTE EEE Hvidbjerg Vinduet a s PETE stergade 24 e 7790 Thyholm H Hvidbj ra Tlf 9691 2222 Fax 9691 2233 www hvid bjergvinduet com Maintenance free Windows and Doors 5 inl ALUX INSTALLATION GUIDE SEALING The outside sealing must be placed on the aluminium part Underneath the sill the sealing should be placed behind the draining holes The external sea lant must neither tn Outward whole o
5. INSTALLATION AND USER MANUAL TIMBER ALUMINIUM PRODUCTS nlALUX Hvidbjerg Vinduet a s 0 ge gm ap VINDUET stergade 24 e DK 7790 Thyholm L Hvidbjerg Tel 45 9691 2222 e Fax 45 9691 2233 www hvidbjergvinduet com kl Updated December 2011 fk CONGRATULATIONS WITH YOUR NEW TIMBER ALUMI NIUM WINDOWS AND DOORS FROM Hvidbjerg YOUR NEW QUALITY PRODUCTS FROM HVIDBJERG VINDUET WILL STAY BEAUTI FUL AND FUNCTIONAL FOR MANY YEARS REQUIRING ONLY MINIMUM MAINTENANCE IN THIS LEAFLET YOU WILL FIND GUIDAN CE TO INSTALLATION MAINTENANCE AND FUNCTION OF YOUR NEW WINDOWS AND DOORS FOR FURTHER INFORMATION PLEASE VISIT OUR WEBSITE WWW HVIDBJERGVINDUET COM Hvidbjerg Vinduet a s m E VINDUET stergade 24 e DK 7790 Thyholm g Tel 45 9691 2222 e Fax 45 9691 2233 D Hvidbjer e e Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors CONTENTS INSTALLATION GUIDE MAINTENANCE FITTINGS TOP SWING WINDOWS CHILD PROOF LOCK FITTINGS ENTRANCE DOORS FITTINGS TILT AND TURN WINDOWS AND DOORS FITTINGS TILT SLIDING DOORS CERTIFICATIONS AND CE MARKING PAGE 3 8 PAGE 9 11 PAGE 12 PAGE 13 PAGE 14 15 PAGE 16 18 PAGE 19 21 en ElHvidbj rg Tel 45 9691 2222 e Fax 45 9691 2233 www hvidbjergvinduet com P LI b 1 Maintenance free Windows and Doors 3 mALUX INSTALLATION GUIDE It is important for the function and life of the elements that instal l
6. ansmittance coefficient U value of actual entrance doors please contact Hvidbjerg vinduet acc to EN 14351 1 2006 A1 2010 Tabel E 2 note d EE Hvidbjerg Vinduet a s 8 TESS stergade 24 e 7790 Thyholm g Tlf 9691 2222 e Fax 9691 2233 D Hvidbjer e S Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors n ALUX 22 Hvidbjerg Vinduet a s S ee stergade 24 e 7790 Thyholm H Hvidbjerg Tlf 9691 2222 e Fax 9691 2233 www hvidbjergvinduet com Maintenance free Windows and Doors HVIDBJERG VINDUET A S IS A MEMBER OF VINDUESINDUSTRIEN The Associa tion of Danish Window Manufacturers AND DVC The Danish Window Certifica tion Body CONSEQUENTLY ALL OUR ELEMENTS ARE COVERED BY 5 YEARS WARRANTY SUB JECT TO CORRECT INSTALLATION AND MAINTENANCE FOR FURTHER INFORMATION PLEASE VISIT OUR WEBSITE WWW HVIDBJERGVINDUET COM Hvidbjerg Vinduet a s m E VINDUET stergade 24 DK 7790 Thyholm H Hvidbjerg Tel 45 9691 2222 e Fax 45 9691 2233 www hvid bjergvinduet com Maintenance free Windows and Doors
7. ation is performed correctly The installation should therefore be carried out by professional fitters of windows and external doors Complaints or request for service in connection with failure or defects which are the result of inadequate installation or lubrication are not covered by Hvidbjerg Vinduet s warranty All products are function tested from our factory When unloading and handling the elements use aids and methods which do not damage the elements If stored outdoors the elements must be covered properly The elements must never be exposed of weight from surrounding building parts SECURING Securing should be permanent and carried out with the best suitable KO TA Max 90 cm mecanical means such as frame Max 800 mm bolts dowels When securing in d d composite profile frame head bolts GO ka Max 800 mm should be used Distance between fixing points must not exceed 800mm and distance to corners must be max 200mm This apply both horizon tally and vertically Fixing By element width minor than 1000mm fixing in top and bottom frame is not necessary Permanent wedging of appropriate size should always be placed at the outer edges of the bottom frame Eee ssr 5vsn pms Hvidbjerg Vinduet a s i ETER stergade 24 e 7790 Thyholm g TIf 9691 2222 e Fax 9691 2233 H Hvidbjer S S a Maintenance free Windows and Doors www hvidbjergvinduet com mALUX 4 INSTALLATION GUIDE SECURING CONTINU
8. d Resin provides a natural protection of the wood and gives a water repellent surface Combined with the factory proofing it ensures a long lasting pro duct Therefore minor variations in structure and gloss and discoloration from resin must be accepted even with the best surface treatment Especially on light colour finishes yellow discoloration may occur They can normally be removed with rubbing alcohol on the spot In case the resin penetrats the paint it can easily be removed with rubbing alcohol If small lumps of resin form underneath the paint leave them for 2 3 years or until the resin has penetrated the sur face treatment them remove them with rubbing alcohol or in more serious cases scrape and sandpaper them away before applying new paint Resin lumps and discoloration from knots are not regarded as a failure and as such not covered by Hvidbjerg Vinduet s warranty Double glazing units Outside condensation may occur on double glazing units with high insulation The condensation is due to the lower surface tempera ture of the outside of the glazing unit and has as such no influence on the function of the glass or the general durability Hvidbjerg Vinduet a s e m vi stergade 24 e DK 7790 Thyholm H Hvidbj rg Tel 45 9691 2222 e Fax 45 9691 2233 e e Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors 11 mALUX MAINTENANCE Maintenance and lubrication of ironmongery in general It
9. ing locking iron mongery e clean the glass for labels and the like Traces of glue if any can be removed by using cleanser for glass ceramical cooking plates The fitter always secures smooth operation through adjust ment after fitting Hvidbjerg Vinduet A S cannot be held responsible for faults due to inadequate installation All products are function tested from our factory Hvidbjerg Vinduet a s m VINDUET stergade 24 e 7790 Thyholm g Tlf 9691 2222 e Fax 9691 2233 D Hvidbjer e S Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors 9 mALUX MAINTENANCE GENERAL MAINTENANCE Your new quality products from Hvidbjerg Vinduet will stay beautiful and operational for many years requiring only a minimum of mainte nance Cleaning The outer aluminium surfaces are regularly washed in lukewarm water with a neutral cleaning fluid car shampoo in order to remove dirt from the surface Use only cleaning and care products which do not damage the surface of the ironmongery Maintenance of the aluminium covering The outer aluminium covering of our Alux products are standard chrom plated and powder coated aluminium The treatment provides a strong and weather resistant surface which requires a minimum of maintenance Outside sash and frame should be washed twice a year with a soft brush or cloth and lu kewarm water with a neutral cleaning fluid car shampoo Minor damages of the covering have
10. ints with acid free oil Espagnolettes and espagnolettes with roller cams should be lubricated with acid free oil in the lock case and at rollers side bolts and on striking plates or receivers i i 1 EE Hvidbjerg Vinduet a s m E VINDUET stergade 24 e DK 7790 Thyholm H Hvidbjerg Tel 45 9691 2222 e Fax 45 9691 2233 e e Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors m ALUX 12 FITTINGS TOP SWING CHILD PROOF LOCK DEACTIVATING THE LOCK 1 The sash is opened until the child proof lock blocks the sash 2 The sash is closed approx 2 cm pull slightly in the lower part of the lock 3 Push open the sash 4 Release the arm and the lock falls into next notch 5 Repeat 2 while pulling the lock back and the sash can be opened 6 The sash automaticly slides into cleaning lock and is released as descri bed above Pull FIG WE Hvidbjerg Vinduet a s m E VINDUET stergade 24 e DK 7790 Thyholm g Tel 45 9691 2222 e Fax 45 9691 2233 D Hvidbjer www hvid bjergvinduet com Maintenance free Windows and Doors 13 mALUX FITTINGS ENTRANCE DOORS ALUX entrance doors are furnished with zinkcoated hinges and 3 locking points Handle cylinder etc are optional Please note The locking points must be activated to obtain density Maintenance and lubrication of ironmongery All moveable parts must be lubricated at least once a year with acid free oil in
11. ndows and Doors 21 mALUX CERTIFICATIONS CE MARKING H Hvidbjerg stergade 24 e DK 7790 Thyholm e Danmark 2010 EN 14351 1 2006 A1 2010 Windows timber aluminium Type Alux tilt and turn Used in homes and business buildings Resistance to wind load npd Water tightness npd Acoustic performance npd Thermal transmittance coefficient U value single tilt and turn window 1230 x 1480 mm with standard glazing 1 4 single fixed light 1230 x 1480 mm with standard glazing 1 2 Radiation characteristics Standard glazing solar factor g value 0 63 Standard glazing light transmittance Lt value 0 80 Air permeability npd npd no performance determined Regarding the thermal transmittance coefficient U value of actual windows please contact Hvidbjerg vinduet acc to EN 14351 1 2006 A1 2010 Tabel E 1 note c Entrance doors timber aluminium Type Alux tilt and turn Used in homes and business buildings Resistance to wind load npd Water tightness npd Height npd Acoustic performance npd Thermal transmittance coefficient U value Frame door 1230 x 2180 mm with standard glazing 1 47 Sliding door 2500 x 2180 mm with standard glazing Los Radiation characteristics Standard glazing solar factor g value 0 63 Standard glazing light transmittance Lt value 0 80 Air permeability npd npd no performance determined Regarding the thermal tr
12. order to ensure easy and smooth operation and function of your doors and to uphold the warranty on the elements aa ee E e ee E i jay De 0 n Hvidbjerg Vinduet a s m E VINDUET stergade 24 e DK 7790 Thyholm g Tel 45 9691 2222 e Fax 45 9691 2233 D Hvidbjer Mai free Wi D www hvidbjergvinduet com aintenance free Windows and Doors mALUX 14 FITTINGS TILT AND TURN WINDOWS AND DOORS USE Tilt and turn is an inward opening window with both a side and bottom hung function The side hung function is primarily used in connection with clea ning of the window outside The handle is turned in a horizontal position and the window sash can be opened sideways i e the whole window sash turns into the room The bottom hung function is used for the daily ventilation and airing By turning the handle 180 into upright vertical position the tilt function is activated providing an opening of approx 100 mm Turning the handle from vertical position 45 upwards gives a venti lation gab at the top sash Faulty Use Note that faulty use malfunction may sted e the opening of the window and the intended use of the ironmongery is blocked e the window sash is pressed towards the wall groove or further down than the integrated stop allows by opening e the window sash or the handle are wrongly stressed or objects are blocking the window groove during opening closing SL oo occur if e the ironmonge
13. r partly cover the drainage holes or cracks at the bottom of the sill in order not to On 4 prevent draining of the ENA ir construction kip BA A Mi Op GE EE EE SS opening door The most common types of sealant are Plastic or elastic foam Asphalt saturated plastic foam illmod sealing tapes e Lime cement mortar must not be used for windows of timber aluminium Inward opening door Hvidbjerg Vinduet a s 8 BEE stergade 24 e 7790 Thyholm g Tlf 9691 2222 e Fax 9691 2233 D Hvidbjer www hvid bjergvinduet com Maintenance free Windows and Doors mALUX 6 INSTALLATION GUIDE ASSEMBLING OF ELEMENTS Vertical assembly with strip and rubber coupler Binding seal Horizontal assembly with drip cap and rubber coupler al lai Ee Binding seal Vertical assembly with binding seal EEE S Hvidbjerg Vinduet a s 7 BEER stergade 24 e 7790 Thyholm g Tlf 9691 2222 e Fax 9691 2233 D Hvidbjer www hvid bjergvinduet com Maintenance free Windows and Doors 7 mALUX INSTALLATION GUIDE CORNER SOLUTIONS 90 corner Hvidbjerg Vinduet a s Sarees stergade 24 e 7790 Thyholm H Hvidbjerg Tlf 9691 2222 e Fax 9691 2233 Maintenance free Windows and Doors www hvidbjergvinduet com mALUX 8 INSTALLATION GUIDE FINISH After fixing the fitter must e clean off the drilling dust from the frame rebate e test functions e lubricate all moveable parts on hinges and clos
14. ry is uncorrectly adju lt gt Adjustment and replacement if necessary should be carried out only by professionals Hvidbjerg Vinduet a s E ie stergade 24 e 7790 Thyholm H H d bj Q Tlf 9691 2222 e Fax 9691 2233 VI er www hvidbjergvinduet dk Vedligeholdelsesfrie vinduer og d re 15 n ALUX FITTING TILT AND TURN WINDOWS AND DOORS CONTINUED Maintenance and adjustment In order to ensure smoot operation please follow the below proce dure at least once a year e Check scissor ironmongery and bottom hinge for wear and cor rect function e All moveable parts and fixing points are lubricated Please use acid free oil e The ironmongery must be protected in case of painting lacque ring e Adjustment of the ironmongery is carried out according to dra wings A Adjustment of fixing points B Adjustment of scissor C Adjustment of bottom hinge B pr Hvidbjerg Vinduet a s ined stergade 24 e 7790 Thyholm H H d bj g Tlf 9691 2222 e Fax 9691 2233 VI er www hvidbjergvinduet dk Vedligeholdelsesfrie vinduer og d re n ALUX 16 FITTING TILT SLIDING DOOR Maintenance and lubrication of ironmongery At least once a year all moveable parts are lubricated with acid free Oil in order to ensure smooth operation and to uphold the warranty HE Hvidbjerg Vinduet a s m E VINDUET stergade 24 e 7790 Thyholm H H d bj g Tlf 9691 2222 e Fax 9691 2233 VI er
15. tness npd Load bearing capacity of safety devices top swing window Passed Acoustic performance npd Thermal transmittance coefficient U value single hinged window 1230 x 1480 mm with standard glazing 1 4 single fixed light 1230 x 1480 mm with standard glazing 1 2 Radiation characteristics Standard glazing solar factor g value 0 63 Standard glazing light transmittance Lt value 0 80 Air permeability npd npd no performance determined Regarding the thermal transmittance coefficient U value of actual windows please contact Hvidbjerg vinduet acc to EN 14351 1 2006 A1 2010 Tabel E 1 note c Entrance doors timber aluminium Type Alux Used in homes and business buildings Resistance to wind load npd Water tightness npd Height npd Acoustic performance npd Thermal transmittance coefficient U value Frame door 1230 x 2180 mm with standard glazing 1 6 Panelled door 1230 x 2180 mm 0 9 Radiation characteristics Standard glazing solar factor g value 0 63 Standard glazing light transmittance Lt value 0 80 Air permeability npd npd no performance determined Regarding the thermal transmittance coefficient U value of actual entrance doors please contact Hvidbjerg vinduet acc to EN 14351 1 2006 A1 2010 Tabel E 2 note d Hvidbjerg Vinduet a s stergade 24 e 7790 Thyholm TIf 9691 2222 e Fax 9691 2233 www hvidbjergvinduet com H Hvidbjerg Maintenance free Wi
16. www hvidbjergvinduet dk Vedligeholdelsesfrie vinduer og d re 17 m ALUX FITTINGS ADJUSTMENTS TILT SLIDING DOORS Hvidbjerg Vinduet a s ener stergade 24 e 7790 Thyholm H H d bj g Tlf 9691 2222 e Fax 9691 2233 VI er www hvidbjergvinduet dk Vedligeholdelsesfrie vinduer og d re n ALUX 18 USE TILT SLIDING DOORS Fig 1 Fig 2 Fig 3 Fig 1 Closed position Fig 2 The doors is tilted by turing the handle in horizonal position Fig 3 By turning the handle from horizontal to vertical position the door can be slided sideways Fig 4 In order to slide the door back the handle should be moved back to horizontal position The door can then be closed by turning the handle down see fig 1 Hvidbjerg Vinduet a s E ie stergade 24 e 7790 Thyholm H H d bj Q Tlf 9691 2222 e Fax 9691 2233 VI er www hvidbjergvinduet dk Vedligeholdelsesfrie vinduer og d re 19 m ALUX CERTIFICATIONS YOUR GUARANTEE FOR QUALITY The Association of Danish Window Manu A pe facturers is the trade organisation of which most of the Danish manufacturers of windows and doors are member As a member Hvid bjerg Vinduet is covered by the 5 year War ranty Scheme of the Association Read more www vinduesindustrien dk Danish Window Verification DVV S DANSK DVV marked windows and outer doors is your VINDUES guarantee that the manufacturer is subject NW VERIFIKATION po systematic control by
Download Pdf Manuals
Related Search