Titan Training Course Notes Level 3
Contents
1. New to V7 is the ability to copy groups onto faders and use these to master the intensity of certain groups of fixtures To assign a group to a fader simply press Copy then choose a group and then press the blue swop button of the fader you would like to be the master It will default to Scale Master but you can choose from the following types under Playback Options Scale Master Scales the intensity of the fixtures relative to their current values _HTP HTP master for that group of fixtures Limit lets you set a maximum level which cannot be overridden by playbacks or other masters Takeover will not take control of the fixtures until you match their current level at which point you can increase or decrease their level Disabled temporarily disables the fader Exercise set a scale master for the All Spots group Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 15 of 24 AA AVOLITES CHAPTER 7 REPORTS There is now the option to export information from the console to both the hard drive or a USB drive You can export a variety of information in HTML PDF XML or CSV format The console can directly open the HTML reports and you can easily export a PDF of your patch for example to USB and then advance it on to a venue You can export the following categories of information Fixtures Groups Palettes2. AVOLITES CHAPTER 7 MACROS A Macro is a shortcut for a series of commands designed to make the users life easier We have a library of macros that we will look at assigning to executors and we will look at recording your own Macros can be used on their own or embedded into cue lists using the Playback View Assigning and Playing Macros To play a prerecorded macro press the Macro button and then choose Play from the softkeys You will then be presented with a list of macros on the softkeys to choose from If you want to assign a macro from our library to a button for quick recall press the Macro button and then choose View All from the softkeys This then opens the Show Library window in the macro section Find the macro you want to use then press Move press the macro and then choose where you want to put it A macro can be put onto the physical executor buttons or into any touch button in the workspace windows Exercise Assign the Rem Dim button to one of the executors Recording Macros You can also record any series of button presses as a macro If you do certain commands a lot these can make your life easier Let s have a go at recording a macro that will do a Release All command Press Macro then choose Record from the softkeys You will have the options on the softkeys now to enter a name and user number and also choose whether to record the macro in Real Time where it records how long it takes the user t
3. Cues Chases and Cue Lists To export information press Disk and choose Reports Choose which parts of the showfile you would like to export information on and then choose OK on softkey A You will then be prompted to choose a format so pick HTML as it will open on the console As soon as the report has been generated if you have chosen the hard drive it will open automatically Reports on the console are saved in the D drive under the Reports folder Hint if you have chosen a HTML or XML format then you can change the logo in the report for your company logo instead of the Avolites logo Exercise generate a report based on the patch of the showfile in HTML format Save it to the hard drive Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 16 of 24 AA AVOLITES CHAPTER 8 EXTERNAL CONTROL There are four main types of external control that can be used with Avolites consoles We have already looked at one timecode The other three are DMX Triggers MIDI Note Triggers and the Titan Remote Triggers Both DMX triggers and MIDI triggers are set up under the Triggers menu in System mode The Triggers window shows the mappings on the left and the attached triggers for the currently selected mapping on the right You must first create a mapping by pressing the button on the mappings section and giving it a name O
4. England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 11 of 24 AA AVOLITES We have introduced a new function in V7 which allows you to temporarily disable a cue This is an on off toggle on the far right of the Playback View If a cue is disabled it will simply be skipped over until it is re enabled CHAPTER 6 SET LISTS In V7 a new feature called Set List was introduced This is a window which allows you to create groups of playback pages in the style of a set list for a show This show could be anything from an arena show to a local variety show it is not reserved simply for the large scale tours It is designed to help users arrange their show and add notes to sections of the show To make a set list first open the Set List window from Open Workspace Window To add a new set list press the button in the top right of the window You will then be prompted either build one manually create one from existing page information or to create an empty one to add to later Choose the Build option and now choose a playback page for your first track To add this as a track press the button on the bottom of the screen and enter a name if desired Press Enter to confirm your choice Now repeat with other pages each time you press the in the bottom of the screen you will be adding a track You can also add notes to any track in a set list To do so press the Ab button on the bott
5. View using the number pad or by using the live record method in this menu We will be using the live record method Now fire the fader of the cue list ready for the first cue In order to record make sure you have Record highlighted on the softkeys Once this is turned on every time you press Go it will record the time value shown at the top of the screen into that cue To start the timer running press Play on the softkeys Hint if you need to stop whilst recording the timecode for any reason Pause will pause the timer Now press Go at the desired intervals to fire your cues and record the timecode values When you have finished recording make sure to come out of record mode by pressing Record again To playback your cue list you must do two things First make sure that the timer option on softkey B reads Timer Enabled This will allow the timecode to fire cues as it reaches the correct value If you wish to re record your timecode values repeat the above process with this option set to Timer Disabled You will also need to reset the timer so press Pause and then Reset on the softkeys Now whenever you press Play it will start the timer and so start running your cue list Hint to edit a timecode value click on it in the Playback View and type in a value You will notice there is a Start Time option in the softkeys when using Internal Timecode This is designed so that you can have multiple cue lists all runnin
6. and alert the user The Takeover button will be highlighted in red and the connection between the consoles previously shown in green will now be shown in red Press Takeover to disable DMX out from the Master console this will be shown on the prompt display on the Master and the slave console will then take DMX control Exercise Unplug the network cable from the master console and choose Takeover when prompted Hint If you want to disconnect from a Session at any time under the Disk gt TitanNet Sessions menu there is an option to Leave Session This will load back up the showfile you had before going into Multiuser Well done for completing Level 3 Don t forget we run regular webinars on a Thursday covering different features of Titan why not pop on for a refresh or to catch up on new features Details on our website www avolites com training Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 24 of 24
7. values in the User Number Column press Set in the context menu if selecting more than one value and then enter the new user number An exclamation mark will appear as a warning if the number is already in use by another fixture Exercise Change the user numbers of the Atomics to start at 501 More Windows The Channel Grid is a window which will show you information about what the fixtures in your show are doing You can filter to either look at the Output of the console or just the Programmer using the Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 7 of 24 AA AVOLITES toggle in the context menu You can also set the window so that values that are changing will be shown in red through the option Highlight Changes You can choose to look at information coming from playbacks DMX levels shapes effects and times with the option to toggle palette views on or off This window is useful to use when programming offline as it gives a useful indication of what fixtures are doing It is recommended to use an external screen when using this window a lot as it means that this window can always be open whilst you re programming The DMX window is a graphical view of what every DMX channel is outputting in contrast to the Channel grid which shows you what the fixtures are outputting It is a useful window to test DMX output of fixtu
8. 0 12 14 Page 9 of 24 AA AVOLITES Import Items Once you have mapped your fixtures you can then import any items to do with those fixtures into your show To do this simply use the filters on the left of the Show Library window to select the type of item to look at for example palettes and then select the palettes you wish to import They will go red and then you need to choose a location to map them onto so for colour palettes simply open the Colour window and click on an empty handle If you choose Quick Import from the softkeys then they will go into the first available handle in the relevant palette window Exercise Complete the examples on the Import Show Scenario Sheet Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 10 of 24 AA AVOLITES CHAPTER 5 CUE LISTS In Level 2 we covered the basics of cue lists In Level 3 we are going to cover the more complex features of cue lists including complex autoloads macros in cue lists and disabling a cue In Level 2 we looked at simple autoloads by linking in a single playback to a cue in a cue list You can achieve more complex effects by linking cue lists together For example if you have programmed a lighting cue list and video or pixelmap cue list separately you can link them together using autoload To start with if we want to fire cue 1 of the pixelmap cue
9. 4 Page 4 of 24 AA AVOLITES the console will automatically boot from the USB and start the recovery Follow the onscreen instructions entering details as prompted Hint if a USB stick is left plugged into the console when it is powered on it will try and boot from this for the same reason If you get a message saying Invalid Disk or similar on boot up power down remove the USB stick and reboot When we release a point release such as V6 1 you only need to run an update installer Download the point release from http www avolites com software latest version for your console and then save the exe file to a USB stick Power up the console and remember to first shut down the software using the option in the Tools menu Once you have done this go to the Tools menu choose the Control Panel option and run the Installer as for the Personality Library installer Exercise Update your console to the latest version of software if it is not already on it Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 5 of 24 AA AVOLITES CHAPTER 3 FIXTURES In Levels 1 and 2 we covered most of the options with patching and fixtures that you will need when running a show In Level 3 we will look at the last section for fixtures covering how to clone fixtures edit user numbers and attribute values how to use the DMX and Channel Grid
10. AA AVOLITES Titan Training Course Notes Level 3 CONTENTS CHAPTER 1 INTRODUCTION CHAPTER 2 CONSOLE SET UP CHAPTER 3 FIXTURES CLONING CURVES DMX AND CHANNEL GRID WINDOWS CHAPTER 4 IMPORT SHOW CHAPTER 5 CUE LISTS MORE OPTIONS CHAPTER 6 SET LISTS CHAPTER 7 MACROS CHAPTER 8 MASTERS CHAPTER 9 REPORTS CHAPTER 10 EXTERNAL CONTROL MIDI AND DMX TRIGGERS REMOTE AND TIMECODE CHAPTER 11 TITAN NET AND TITAN NET PROCESSORS CHAPTER 12 MULTIUSER AND BACKUP Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 1 of 24 AA AVOLITES CHAPTER 1 INTRODUCTION With the introduction of Titan V8 we have split the Titan training into 3 levels Level 1 is an introductory course designed for those who only have experience of the Classic software or those who have never used an Avolites console before It is recommended that before those who have not completed a Titan Course since the release of Titan V6 do so as there are a lot of new features in every version Level 2 is a course designed for those who have completed Level 1 or those who have strong background knowledge of Titan We will revisit many functions covered in Level 1 and look at them in depth and also cover more advanced features such as cue lists and pixelmapping Level 3 is available once Levels 1 and 2 have been completed and covers advanced f
11. d as needed on a per fixture basis These include attribute curve limits channel freezing and inverting Many of these can be accessed on the Attribute Behaviour Tab on the Patch View Press Patch gt Patch View then select the tab labelled Attribute Behaviour In the context menu you will see options to set the curve of a channel invert or freeze a channel and set upper and lower limits You can filter by fixture type and DMX line as usual but there is also an option at the bottom to sort by either modified fixtures or all fixtures Limits this allows you to set a minimum and maximum value for a channel which will not be overwritten by playbacks or the programmer Invert this will invert the output of a channel so for example if you invert a dimmer channel at 0 it will be at full intensity at 100 it will be off Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 6 of 24 AA AVOLITES Curve here you can set a specific curve on any channel For example you might want to set a dimmer channel to be a relay curve Freeze this will hold a channel at a specified value that will not be affected by playbacks or the programmer Offset this will adjust all the values for a fixture in a show ie move all pan tilt values if you offset position Exercise Find the Beams in the Attribute B
12. e and press Add on the softkeys Exercise Now complete the Triggers Scenario sheet Timecode Timecode is a way to automate a cue list so that lighting video sound and other effects can be synchronised across devices Many complex shows are automated in this way to ensure everything happens at exactly the same time Avolites consoles support internal timecode MIDI a scheduler Winamp for programming and SMPTE on the newer consoles Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 17 of 24 AA AVOLITES Hint when using MIDI for either timecode or triggers it must be connected through the MIDI port on the back of the console Avolites does not support USB MIDI devices Let s use the Demo Cue List to run to timecode First go to the Timecode menu on softkey E Now make sure that the type of timecode shown under softkey A is Internal This is the only one we can stop and start manually from the console all others are determined by external sources The timecode sources are interchangeable so you can program using the Internal timecode and then switch the source to MIDI when you get to site Now we need to make sure that the cue list is connected Under Connected Cue Lists press the blue swop button of the cue list to connect it to Timecode There are two ways of entering timecode values either through the Playback
13. eaning the consoles are no longer communicating It also displays the last save sync time and the last time there was communication between the consoles There are also three buttons under the image Exit this will cancel the backup system Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 21 of 24 AA AVOLITES Sync Now this forces a new save onto the slave console Takeover this will disable DMX output from the master console and give control to the slave console Once the master console has been disabled you will see the top of the screen read Safe Mode DMX Output Disabled You can then re enable DMX output from the Master console by touching the screen Exercise Using two consoles make sure the IP range on both is set to 10 and they are connected on the same network Set them up in a backup system Setting Up Multiuser There are two types of Multiuser if you choose Multiuser when prompted you will continue to output DMX from your current showfile and just the UI will change and log into the Master console If you choose Multiuser Backup then you will take the showfile as well as the UI The first is useful when you have a venue with different spaces in and a console controlling each of these spaces Providing they are all networked together you can log into any console from yours c
14. ehaviour Tab In the last show they had a tilt limit set so they did not hit the ceiling With the Upper Limit selected in the context menu select the modified values and choose Remove Limit from the softkeys This will reset them to the default value There are more options for editing fixture values under Patch gt Edit Fixtures Swap Pan amp Tilt this will swap the pan and tilt channels of the fixture over particularly useful if a fixture is rigged horizontally Reset Behaviour this will reset all changed values such as invert limits etc Exercise the strobes have had values inverted and limits set Reset them to default using the Reset Behaviour option There are also two options in this menu dedicated to personalities Update Personality is used to update a personality already patched in the show once the file has been updated through the personality library installer Edit Personality will give you a list of personalities patched into the show and by choosing one it will open the Personality Builder For help with Personality Builder use the Quick Start Guide Changing User Numbers When working with large rigs then user numbers become a very useful tool in recalling fixtures and groups The user is set when you record the fixture but you can also change it afterwards through the Patch View Open the Patch View and choose the Patched Fixtures tab To edit a user number select one or more
15. er 2 and Chapter 11 Sessions Overview To start setting up any of these you must first go to Disk and then choose TitanNet Sessions from the softkeys In this menu choose the Sessions Overview option from the softkeys The window that now opens up will show you the console you are on and each console available over the network Other consoles and sessions not connected to your console are shown within boxes Once you have chosen which console session you want to connect to select it on the window and you will then be asked to choose whether to connect in Multiuser Multiuser Backup or Backup Hint you are always setting the slave console so you will be taking the showfile of the console you are connecting to Setting Up a Backup System The backup system will work in a Master Slave scenario where the master console will push the showfile into the slave desk whenever a save is made Page changes will also track on all consoles except the Expert due to the physical roller Following the steps above in the Sessions Overview screen choose the Master console to connect to and choose the Backup option when prompted Once you have chosen a master console then the slave will immediately pull the showfile over and a screen will be displayed reading TitanNet Backup and the name of the show underneath You will see an image of the two consoles with the connection a green line being an active connection a red line m
16. g to cue lists but with different start times and this option allows you a shortcut when you are recording Remote With the release of Titan V7 you can now use the Titan Remote on Android and iOS devices It is designed to be able to be programmed alongside the console with a completely separate programmer You can select fixtures by both handle and syntax select and record groups apply record and update palettes and play back cues recorded in the Playback Window As it has a completely separate programmer you could have someone updating palettes on the remote and someone else updating playbacks on the console Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 18 of 24 AA AVOLITES To use the remote first download the Titan Remote app from either the Google Play Store or the Apple App Store and connect a Wireless Access Point WAP to the console In the same way as we looked at networks at the start of the day you need to make sure the console WAP and phone are all on the same IP range Once you have done this then you can open the Titan Remote app on your device Hint the speed of the remote will vary depending on the age of your device and the strength of the WIFI signal For better performance use a stronger WIFI device On the start up screen it will show you a list of Titan consoles available on the network iden
17. he console starts with the same number but ends in a different number to the device on the network then they will be able to connect properly An example setup would be Console 10 0 0 1 Capture machine 10 0 0 5 Hint two devices cannot have the same IP address otherwise they will not connect Please note that when a laptop or PC is connected to the internet using the ethernet connector then it will be set to a different IP address to those which work with Art Net Make sure you change it to either 2 or 10 To change the consoles IP address go to System Mode and then select Network Settings from the softkeys You will then be given the option of up to 2 network adaptors to set depending on the console Hint You will only be shown network adaptors when the ports on the console are connected to something If you have a cable connected but the lights on the port are not lit up try changing the cable or checking the connection at the other end When you select an adaptor you will be given the option to manually set the IP and subnet but there are also options displaying 2 and 10 on the softkeys If you choose one of these then the console will automatically find a free address on the network Exercise Connect your console to a laptop running Capture or similar and set your IP range using the 10 button Set the laptop IP to the same range Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL E
18. list in cue 2 of the lighting cue list go to the Autoload column for cue 2 of the lighting cue list and click in the cell Now in the same way as you did for Level 1 click on the item to autoload in this case the pixelmap cue list The default action for autoload is Load but you can change this by clicking on the cell again and choosing the autoload to edit You then have 3 options to toggle through on softkey B Load Target this will effectively raise the fader of the playback being autoloaded Go to Cue this lets you specify a cue from a cue list you are autoloading Press Go On Target this emulates the action of pressing Go on another cue list at the same time Hint if you want to set the same action on many autoloaded cues simply drag down multiple cells and set a function at the same time for all of them Exercise Set the following autoloads on the Demo Cue List Cue 2 Pixelmapper Cue List gt Go to Cue 2 Cue 3 Pixelmapper Cue List gt Press Go On Target Cue 4 Pixelmapper Cue List gt Press Go On Target Cue 5 Pixelmapper Cue List gt Press Go On Target Macros You can add macros into a cue in a cue list using the Macro column in the Playback View To add one in select the cell next to the cue you wish to add the macro into Exercise On Demo Cue List add a Release All macro into the last cue of the cue list Disable Cues Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL
19. nce you have done this you can start adding triggers in to the mapping Press the Add Trigger option on soft key A and you first choose what will be fired by the trigger then set the trigger value There is an option on the softkeys that toggles between Hardware and Item Hardware is the physical fader or button regardless of what page you are on at the time of triggering So a trigger set to Fader 1 will fire whatever is on fader 1 on the current page Item is the item actually recorded in that location for example if you have Red Look recorded on fader 1 on page 1 and you attach a trigger to that then no matter what page you are currently on the trigger will always fire the Red Look playback Choose Item and then press the grey flash button of the Blinder playback on page 1 Make sure you set the action you want for this trigger so to be able to flash the blinder cue choose Flash When you have done this press OK and you will now be prompted to choose the trigger device You can toggle on the softkeys between DMX and MIDI make sure you have selected the correct option for your device The easiest way to record your triggers is to have the device connected and Learn On on the softkeys This way you simply need to send the MIDI Note or DMX value in that you want to trigger the Blinder cue and the console will automatically record the values With Learn On press the button you want to trigger the Blinder cu
20. ndow faster In here to take an item out of the Show Library and assign it to a handle there are two options Turning Quick Assign on will automatically assign an item to the first available handle in the relevant window ie selecting a colour palette puts the item into the colour palette window If you don t want to auto assign items you can choose Move then choose an item and manually assign it to a new location Hint If you don t press Move then touching an item in the Show Library will activate it ie if you press a fixture it will select it if you press a playback it will turn it on If you want to work with just the Spots you don t have to assign the fixtures themselves you can just assign the group as the group still references the fixture selection in the showfile This means you can work with only the items you want Exercise Assign the groups for the Spots and the palettes that relate to them Remember you can select a range of items and assign them all at the same time Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 23 of 24 AA AVOLITES Taking Over on A Backup Console If you need to switch to a backup desk during a show then provided you have the consoles configured in either Backup or Multiuser Backup when the console loses connection to the Master console the Session View window will come up
21. ngland www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 3 of 24 AA AVOLITES DMX settings Window When you have set your IP address then stay in System Mode and go to the DMX Settings window This window shows you all current DMX connections the console has and all available connections On the left side of the window you have connections available detailing DMX cards Art Net S ACN and eDMx On the right of the window are all the lines of the console to which you can attach these connections The default for a new show is 4 universes of DMX on lines 1 4 To add a new connection click it on the panel on the left and then click the DMX line to attach it to If you want to then change the universe of an Art Net connection press the i button next to the connection Exercise Attach 8 universes of Capture to the first 8 DMX lines starting from Capture Universe 0 on Line 1 etc You can also connect Art Net to DMX boxes via this window they will also appear in the Art Net section on the left panel Exercise if you have an Art Net to DMX box available connect it to the console set the IP range of the box to 10 and then use the DMX Settings window to assign the Art Net Updating Your Console There are two main types of update you will need to be able to perform on your console a personality library update and a software update To update the personality library first dow
22. nload the correct one from http personalities avolites com Save this to the root drive of a USB stick and then put this into the console If you have a hardware console such as the Tiger Touch Pro Expert Pro or Sapphire Touch on the Tools menu on the Titan start bar go to the Control Panel option From here as long as you have saved the installer into the root of the USB drive the installer will be shown under Titan Installers This will update the entire personality library on the console Please note you will need to restart the software before getting access to the updated personalities If you have a software based console such as the Titan Mobile or Titan One plug the USB stick into your PC and simply run the installer directly from there Exercise update the personality library on your console When updating software there are two types of update When a major version of software is released e g V6 V7 then a full recovery will need to be run on the hardware consoles You will need a bootable USB stick to do this there will be one available inside the console which you can update Go to http www avolites com software latest version for details Once you have created your USB power down the console and then put the USB stick into the desk When you turn the desk back on Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 1
23. o press the buttons or Full Speed which will take all button presses and run them instantly For this macro Full Speed is the desired setting so make sure the console is showing you this and then choose a handle to record onto If you press the Record button from the softkeys it will store the macro as a number with no handle As soon as you press a handle to record onto the console will then return to the normal Program mode menu EVERYTHING you press now is being recorded so be careful to only press what you want recorded in the macro Press the following Release gt softkey A Release All To finish recording a macro press the Macro button again Hint If you re writing a complex macro try writing out the button presses beforehand Exercise Now create a macro to change the playback page to page 10 Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 13 of 24 AA AVOLITES CHAPTER 8 MASTERS It is possible to assign masters to any fader on the console you want Some of the consoles have fixed masters such as the Expert Pro but some have none such as the Sapphire so you can choose where you want them There are 3 main categories for masters intensity masters soeed masters and group masters To assign masters go to System Mode and then choose the Assign Masters option Intensity Masters You can as
24. om right of the screen when a track is selected Exercise add a note to the second track of your set list saying Drum Solo You can also add screen shots into a track for example if you want to always bring up certain windows when a track is active To do this in the context menu press Edit Track and then choose the Record Snapshot option from the softkeys If you need to change the track list after you have recorded the set list then you can either move or park tracks To move tracks around press Move choose the track to move and then press another track to move it to that position Exercise Move the third track so it is now the first track to play If you want to temporarily disable a track you can choose it and then press the Park Track option in the context menu Possibly the most important option with set lists is the ability to reorder your pages into the order of the set list There is an option both if you press Go To Page tap the touch display on the roller and also in the Set List Window to change between the pages being in normal mode the order they re actually recorded in and set list mode the order of the currently selected set list This means you can page up and down through your set list without needing to keep the window open Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 12 of 24 AA
25. ontinue to output DMX for your venue whilst making a change to another showfile The second option is the more common setup for multiple consoles on the same show so you get multiple operators on the same showfile whilst still having backup options Exercise setup two consoles in Multiuser Backup Once you have two consoles connected you are sharing everything by default so any changes made to playbacks palettes etc are instant and any items you record show up immediately on both desks Each console has it s own programmer however so there is no danger of clashing with each other If an attribute of a fixture is in another consoles programmer a small blue blob will appear next to the attribute If you want to force clear everything across all programmers hold down Clear and choose Softkey G Clear all Programmers Hint this blue blob also appears if the attribute is in the Remote programmer Users When you first connect consoles together you will be on the same User This means as soon as you change Handle World or any user settings this will affect both consoles If you create separate Users for each console then you can start customising how and what you program To create a new User go to Disk gt Users gt Add A User Exercise Create a new User for each console connected in Multiuser To change User hold down the Avo Shift button and choose the User option from the softkeys Avolites Ltd 184 Park Avenue Pa
26. res as well as troubleshooting Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 8 of 24 AA AVOLITES CHAPTER 4 IMPORT SHOW One of the key features included in the release of V7 was the Import Show feature This allows you to pull in information from other show files to reuse in your current show You can reuse whole groups of fixtures or just information such as palettes and playbacks There are two main parts to this feature importing items and fixture mapping To get to the Import Show options press Disk and then Import Show Once you have chosen a showfile to look at it will then be pulled into the Show Library where you can look inside it and choose which parts to import Hint At this point the showfile is not loaded it is simply read from the drive enabling you to look at the items contained in the show and choose what to import Import Fixtures and Fixture Mapping When wanting to import fixtures directly from a previous showfile you need to select the fixtures from the show library and then choose new handles for them to map onto Once you have imported the fixtures you can then import any items relating to the fixtures and use them straight away Hint You can use Quick Import to have the console automatically assign a fixture or item to the next available handle You can also import items such as palette
27. rk Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 22 of 24 AA AVOLITES Handle Worlds A Handle World is the arrangement of all of the items in your showfile By default you only have one Handle World called Mapping World 1 If you have multiple programmers on a single showfile then having each programmer have their own handle world can be useful This means you could have one programmer having access to everything whereas one could only have the media server control for example Once you have created separate Users for each console you can now to Disk gt Handle Worlds and choose Create Handle World Once you have given it a name the console will then prompt you to choose whether to create a Handle World based on the default Mapping World 1 or an empty one If you just want to take the existing layout and tweak it then choose the default Mapping World 1 If you are wanting to work with just a certain set of fixtures or playbacks then choosing Empty is advised Exercise Create a new Empty Handle World Once you have created an Empty Handle World the console layout will be the same as that of a new show ie look empty However all the show data is still accessible within the Show Library To open the Show Library press Open Workspace Window on the softkeys and choose Show Library Hint Use the Search function to find the wi
28. s you must now assign the ports on the TNP to lines on the console Go to System on the console and choose DMX Settings from the softkeys At the tabs on the top of the window select TitanNet Overview On the left there are all the lines you can patch onto up to 64 lines and in the middle you assign where the source DMX will come from either a desk or TNP In order to patch a line onto a source simply click on a line then click either the console or a TNP A coloured line the same colour as the source will then appear linking the two You can connect up to 16 lines to each console or TNP Once a line is assigned you can then output data to it The console will let you patch fixtures onto a line which is not currently assigned for use with preprogramming but be sure to assign the line once you get to site or you will not be able to output data to them For more detail on setting up the TNPs see the TNP user manual Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 20 of 24 AA AVOLITES CHAPTER 12 MULTIUSER AND BACKUP With the release of V8 there are now a number of choices when using a multi console setup You can choose Multiuser Multiuser and Backup or Backup With all of them ensure the consoles are connected over a network through a gigabit switch and in the same IP range for more detail on these see Chapt
29. s from previous showfiles There are two main options for this If you want to import Global palettes such as global colour palettes or pixelmap palettes then all you need to do is select the palettes and either use Quick Assign or manually select a handle and the palette info will work straight away If you want to use shared or normal palettes or any playback on existing fixtures then you will need to use the Fixture Mapping option in the Show Library before importing any other items First use Import Show to load up a show then look at the Fixture Mapping tab Fixtures already in the current show are on the left of the window fixtures available in the Imported show are on the right By clicking on a fixture on the right and then clicking on one on the left you are attaching the fixture in the old showfile to one in your current show This means that any items you import from the show to do with the mapped fixture such as palettes groups or playbacks can instantly be used in your new show with the new fixtures This means you could take playbacks recorded on a Mac 101 and map them straight onto your Robe 100 LED Beams ready to be used Hint you must first map your fixtures and then import the items otherwise there is no information available in the new show for the items and they will be empty Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 2
30. sign the following masters to any fader on a console Grand Master masters the overall intensity of the console Preset Master masters the levels of dimmers and fixtures in the preset section Playback Master masters the levels of the playbacks Flash Master masters the maximum level used when flashing playbacks Swop Master masters the maximum level used when swopping playbacks To assign one of these masters select it from the softkeys and then choose a fader to assign it to Speed Masters We also have the ability to assign speed masters which can control chases shapes and pixelmaps You can assign a Rate or BPM Grand Master which will master the overall speed of everything on the console However you can also assign masters which you can then group one or more specific playbacks onto Let s assign a master which will control the speed of our blue vortex pixelmap Got to System Mode and assign Rate Master 1 to a fader Now in order to get the vortex playback to be mastered by Rate Master 1 go to Playback Options for the vortex playback and choose the Speed Source option Now to connect it to Rate Master 1 all you need to do is press the blue swop of the rate master Exercise Now connect a dimmer shape to Rate Master 1 Group masters Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 14 of 24 AA AVOLITES
31. tifiable by serial number Choose your console and the remote will then pull the show file in You will then see you have all fixtures available to use with a swipe function to look at different pages The Keypad option is a toggle on and off for using syntax and the IPCGBES letters let you select different attributes to control Exercise Connect your phone or tablet to the console using the Remote App Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 19 of 24 AA AVOLITES CHAPTER 11 TITAN NET AND TITAN NET PROCESSORS Titan Net is the protocol that Avolites uses to talk between devices running Titan most commonly Titan Net Processors TNPs It runs over ethernet cables in a similar way to Art Net We strongly recommend using a gigabit switch when networking Titan Net devices together to optimise network speed and performance To connect a TNP first connect the console to a TNP via a gigabit switch using the ethernet ports on the back of the console and the front of the TNP If you have multiple TNPs in your setup connect them all via the switch rather than daisy chaining them together Now ensure that they are all on the same IP range we recommend using IP range 10 For more detail on how to do this on the console refer back to Chapter 2 To change the IP address of the TNP go to Setup Once you have done thi
32. unctions such as Show Import Network and Multiuser set up MIDI and Timecode control and Ai control This training session is based on loading the Titan Training Level 3 showfile BEFORE starting the training For this training session you will need 2consoles both running Titan 8 1 agigibit switch aTNP 4x network cables a laptop running visualiser Avolites Ltd 184 Park Avenue Park Royal London NW10 7XL England www avolites com Written by Emma Thompson and Rosie Haigh Last Update 20 12 14 Page 2 of 24 AA AVOLITES CHAPTER 2 CONSOLE SET UP There are many different setups that you could use a lighting console in from straight DMX to Art Net to DMX devices to Art Net fixtures You could also be linking together consoles for backup purposes or multiuser You may also need to update the personality library or software of the console or connect an external touch screen This chapter is designed to help you customise your console setup to meet different show requirements Setting Up Your Network When using more than 4 lines of DMX with a Titan console you will need to know how configure the consoles IP address and Art Net settings The IP address of the device you are connecting to over the network must start with the same number as the console and must have the same subnet mask The generally approved ranges for Art Net are 2 and 10 The subnet mask should be set to 255 0 0 0 As long as t
33. windows and how to tweak a personality file Fixture Cloning When touring and using house rigs you will often have more or less fixtures in your show on a day to day basis Having fewer fixtures in your show is easy you can simply park them and not use them If you have more fixtures you can use a function called Copy Fixture or cloning on other consoles When you clone a fixture it will behave exactly the same as the fixture it was copied from being placed in the same groups palettes and playbacks In this way the only things you will need to update will be position palettes as it will have exactly the same DMX values and shapes as it will using the same spread and fixture order so may need tweaking To copy a fixture simply press Copy and then a fixture handle to copy and then a free handle to place the new fixture onto When a fixture is copied it will be parked so to assign it a DMX address simply use Repatch Hint if you are copying a truss of 6 fixtures to a truss of 8 fixtures it is recommended to copy from as close to the original fixture as possible Therefore it would be easier in this example to copy one fixture from the extreme left of the truss and one from the extreme right Exercise Take the group of the 4 floor spots In this venue there are 6 so use Copy to add the extra 2 fixtures in and then readdress them from the patch sheet Edit Fixture Information There are many values that can be edite
Download Pdf Manuals
Related Search