SDMET User Manual
Contents
1. DIGITAL INSTALLATION CONFIGURATION MANUAL SDMET 901 SDMET 902 SDMET 904 Single Dual Quad Input Digital Modulators Thor Digital TABLE OF CONTENTS SAFELY PRECAUTIONS GAAN KG 2 PACKAGE CONTENTS 3 PRODUCT DESCRIPTION apan NAE 3 SPECIFICATIONS gen 4 P 5 UNPACKING and INSPECTION 2 10011 2 4 4 0 000 00000000000000044400 5 PRODUCT PICTURES and DIAGRAMS 5 DUMP X 6 SOME P 6 SOME T 6 HARDWARE INSTALLATION and CONNECTIONS 7 MODULATOR SETUP AND CONFIGURATION 9 INITIAL SETUP TO FACTORY DEFAULT cmm 9 MODULATOR CONFIGURATION 9 DIGITAL MODULATOR NOTES nanan GANA AA FER ice 13 2 SDMET Series Manual V1 0 Thor Digital SAFETY PRECAUTIONS The presence of this symbol is to alert the installer and user to the presence of uninsulated dangerous voltages within the product s enclosure that may be of sufficient magnitude to produce a risk of electric shock TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE DO NOT OPEN THE UNIT REFER SERVICING TO QUALIFIED PERSONNEL ONLY D2. SDMET Series Manual V1 0 Thor Digital MODULATOR SETUP AND CONFIGURATION I CET TAGA OM TAL SDM 7 904 Encoder ulator Reset LCD Display Scroll Up Down Enter OK MODULATOR CONFIGURATION Once the modulator is powered back up it will go through an internal booting process When Running appears in the LCD Display the unit is ready for programming or operation Password Press the OK button to select 4 digit password Use the Scroll Up Down button to search and select individual numbers for the password Press the OK button for each number to set the password The default password is 0000 Advanced Menu To access the Advanced Menu first enter the password by pressing the OK button Once the correct password is entered press the OK button and the LCD Screen will display Advanced Menu Output Channel The following configuration options are available under Advanced Menu Output Channel Use the Scroll Up Down button to change the output channel Channels 2 to 69 are available Once the desired output channel is selected press the OK button to set the channel Attenuation Use the Scroll Up Down button to select Attenuation Press the OK button to enter the Attenuation menu Use the Scroll Up down button to select the desired attenuation increments from 0 to minus 20dB Once the desired attenuation level is found press the OK button to set Constellation Use the Scroll Up Do
3. Configuration then press the OK button Caution Once the OK button is pressed the unit will automatically reset to the factory default LCN Mode Use the Scroll Up Down button to select LCN Mode Press the OK button to enter the LCN Mode menu Use the Scroll Up Down button to select the desired LCN Mode APN EACEM ITC NorDig The factory default is ITC Press the OK button to set 11 SDMET Series Manual V1 0 Thor Digital 1 Video Input Use the Scroll Up Down button to select 1 Video Input Press the OK button to enter the 1 Video Input menu Use the Scroll Up Down button to select the Video Input option NTSC PAL ASI The factory default is NTSC Press the OK button to set If the modulator has more than one video input scroll through the Advanced Menu for the additional video input menus 1 Program Num Use the Scroll Up Down button to select 1 Program Num Press the OK button to enter the 1 Program Num menu Use the Scroll Up Down button to select the desired 1 Program Num option ranging from 0 to 65535 then press the OK button to set Factory default is 4173 If the modulator has more than one video input scroll through the Advanced Menu for the additional Program Num menus 1 Channel Name Use the Scroll Up Down button to select 1 Channel Name Press the OK button to enter the 1 Channel Name menu Use the Scroll Up Down menu to select the first character of the desired Channel Name then press the OK button to se
4. 20X480 30fps Video Compression MPEG MP ML MPEG MP ML MPEG MP ML Audio Compression MPEG1 Layer MPEG1 Layer II MPEG1 Layer Carrier OFDM 2K 8K 2K 8K 2K 8K 16 32 64 128 256 QAM 64 128 256 QAM 64 QAM GENERAL Power Supply 12 VDC 3A 12 VDC 3A 12 VDC 3A 1100mA 1300mA 1700m English English English Dimensions 300mm x 200mm x 300mm x 200mm x 300mm x 200mm x 47mm 47mm 47mm 1 66kg 172 L86kg 5 SDMET Series Manual V1 0 Thor Digital INSTALLATION System Installer must adhere to Article 820 40 of the NEC that provides guidelines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as possible UNPACKING and INSPECTION Each unit is shipped factory tested Ensure all items are removed from the container prior to discarding any packing material Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls If there is any sign of damage to the unit or damaged or loose connectors contact your distributor immediately Do not put the equipment into service if there is any indication of defect or damage PRODUCT PICTURES and DIAGRAMS SDMET 901 2 901 Encoder Modulator SDMET 902 2 SDMET 902 Encoder Moduiator E R ET SDMET Series Manual V1 0 Thor Digital SDMET 904 be SDMET 804
5. EncoderModulator SDMET Series Manual V1 0 Thor Digital HARDWARE INSTALLANTION and CONNECTIONS 1 The unit can be rack mounted in a standard EIA 19 rack Attach the rack mounts if the unit is to be installed in a rack Use a 75 coaxial cable with RCA connectors to connect the video source e g DVD VCR Camera to the units yellow RCA VIDEO INPUT jack IN1 IN4 depending on the DIGITAL model Repeat this step for each video source connection It is highly recommended that quality coaxial cable and connectors be used for all video source connections Use RCA cables to connect the audio source to the red white AUDIO L and AUDIO R INPUT jacks IN1 IN4 depending on the DIGITAL model Use the red and white jacks for audio input or either one for a single input Repeat this step for each audio source connection Be sure the video and audio connections for each source are consistent with the units inputs IN1 IN4 depending on the DIGITAL model It is highly recommended that quality cables and connectors be used for all audio source connections Use a quality 750 coaxial cable with F connectors from the units RF OUT jack to the distribution system combiner or reverse splitter or directly to a television 5 Connect the included 12VDC 3A power supply to the units DC 12V POWER jack 6 Connect the 12VDC 3A power supply to an appropriately rated AC power outlet SDMET Series Manual V1 0 Thor Digital
6. K button to enter the CELL ID menu Use the Scroll Up Down button to select the desired CELL ID ranging from 0 to 65535 then press the OK button to set Factory default is 0 Stream ID Use the Scroll Up Down button to select Stream ID Press the OK button to enter the Stream ID menu Use the Scroll Up Down button to select the desired Stream ID ranging from 0 to 65535 then press the OK button to set Factory default is 4109 Network ID Use the Scroll Up Down button to select Network ID Press the OK button to enter the Network ID menu Use the Scroll Up Down button to select the desired Network ID ranging from 0 to 65535 then press the OK button to set Factory default is 12289 ORG Network ID Use the Scroll Up Down button to select ORG Network ID Press the OK button to enter the ORG Network ID menu Use the Scroll Up Down button to select the desired ID ranging from 0 to 65535 then press the OK button to set Factory default is 9018 Network Name Use the Scroll Up Down button to select Network Name Press the OK button to enter the Network Name menu Use the Scroll Up Down button to select the first character for the desired Network Name then press the OK button to set Repeat the process for each character in the desired Network Name A Network Name can consist up to 16 characters Default Configuration If you wish to set the modulator back to the factory default settings use the Scroll Up Down button to reach Default
7. O NOT apply power to the unit until all connections have been made all components have been installed and all wiring has been properly terminated DO NOT terminate change or uninstall any wiring without first disconnecting the unit s power adapter from the device This device is supplied with the appropriately rated 12VDC power supply with the center pin positive The use of any other power supply could cause damage and invalidate the manufacturer s warranty DO NOT connect the power supply to the device if the power cord is damaged DO NOT cut the power cord DO NOT plug the power supply into an AC outlet until all cables and connections to the device have been properly connected The device should be installed an environment consistent with its operating temperature specifications Placement next to heating devices and ducts is to be avoided as doing so may cause damage device should not be placed in areas of high humidity DO NOT cover any of the device s ventilation openings DO NOT cover or obstruct the device s fan or fan openings f the device has been in a cold environment allow it to warm to room temperature for at least 2 hours before connecting to an AC outlet NA 4 NA SDMET Series Manual V1 0 Thor Digital PACKAGE CONTENTS This package contains One SDMET 901 SDMET 902 or SDMET 904 Digital Modulator One power cable One pair of mounting brackets Four adhesive
8. Press the OK button to enter the Brightness menu Use the Scroll Up Down button to select the desired Brightness value 0 to 255 and press the OK button to set Factory default is 128 Contrast Use the Scroll Up Down button to select Contrast Press the OK button to enter the Contrast menu Use the Scroll Up Down button to select the desired Contrast value 0 to 255 and press the OK button to set Factory default is 128 Saturation Use the Scroll Up Down button to select Saturation Press the OK button to enter the Saturation menu Use the Scroll Up Down button to select the desired Saturation value O to 255 and press the OK button to set Factory default is 128 Sharpness Use the Scroll Up Down button to select Sharpness Press the OK button to enter the Sharpness menu Use the Scroll Up Down button to select the desired Sharpness value 0 to 255 and press the OK button to set Factory default is 64 Use the Scroll Up Down button to select Hue Press the OK button to enter the Hue menu Use the Scroll Up Down button to select the desired Hue value 0 to 255 and press the OK button to set Factory default is 128 Device Address Use the Scroll Up Down button to select Device Address Press the OK button to enter the Device Address menu Use the Scroll Up Down to select the Desired Address ranging from 1 to 32 then press the OK button to set CELL ID Use the Scroll Up Down button to select CELL ID Press the O
9. pads One installation and configuration manual Inspect the package before starting installation to ensure there is no damage and all supplied contents are present Contact your distributor or dealer should the device be damaged or package contents are incomplete PRODUCT DESCRIPTION THOR DIGITAL S Digital modulators convert Digital Video Broadcasting DVB standard definition video and audio signals to DVB T The SDMET 901 SDMET 902 and SDMET 904 provide respectively single dual and quad inputs All units feature programmable channel and network names Adjustable RF output Normal Inverted and C W adjustable logic channel numbering LCN and adjustable attenuation are standard features The unit s front mounted LCD display and controls allow for easy configuration and adjustments The SDMET 901 SDMET 902 and SDMET 904 are perfect for multi video distribution solutions in the commercial and institutional market hotels motels sports bars restaurants hospitals casinos business and university campuses etc as well as home entertainment systems SDMET Series Manual V1 0 Thor Digital SPECIFICATIONS Specifications are subject to change without prior notice INPUT SDMET 901 SDMET 902 SDMET 904 OUTPUT Adjustment F female F female F female MODULATION 0 0 PAL 720x576 25fps PAL 740x576 25 5 PAL 720x576 25fps NTSC 720 480 30fps NTSC 720X480 30fps Video Resolution NTSC 7
10. screen Press the OK button twice to exit Once the settings are made and the modulator is programmed a remove power from the unit by disconnecting the power supply cable from the DC 12V jack b wait 5 seconds and c reconnect the power cable to the unit s DC 12V jack This will allow the modulator to capture the new settings 12 SDMET Series Manual V1 0 Thor Digital DIGITAL MODULATOR NOTES PRODUCT NOTES ITEM VALUE PASSWORD SERIAL NUMBER 2 Le INSTALLATION DATE 0 PURCHASE DATE 0 VIDEO 1 INPUT VIDEO 2 INPUT VIDEO 8 INPUT 2 VIDEO 4 INPUT 2 SDMET Series Manual V1 0
11. t Repeat the process until the Channel Name is completed If the modulator has more than one video input scroll through the Advanced Menu for additional channel name menus 1 Provider Name Use Scroll Up Down button to select 1 Provider Name Press the OK button to enter the 1 Provider Name menu Use the Scroll Up Down button to select the first character of the desired 1 Provider Name then press the OK button to set Repeat the process until the desired Provider Name is completed If the modulator has more than one video input scroll through the Advanced Menu for additional Provider Name menus 1 LCN Use the Scroll Up Down button to select 1 LCN Press the OK button to enter the 1 LCN menu Use the Scroll Up Down button to select the desired LCN value then press the OK button to set The 1 LCN value range is from 1 to 999 If the modulator has more than one video input scroll through the Advanced Menu for additional LCN menus 1 Aspect Ratio Use the Scroll Up Down button to select 1 Aspect Ratio Press the OK button to enter the 1 Aspect Ratio menu Use the Scroll Up Down button to select the desired Aspect Ratio option of 4 3 or 16 9 then press the OK button to set Factory default is 4 3 If the modulator has more than one video input scroll through the Advanced Menu for additional Aspect Ratio menus To exit the Advanced Menu use the Scroll Up Down button to select Exit then press the OK button Exit Exit Menu will appear on the LCD
12. wn button to select Constellation Press the OK button to enter the Constellation menu The modulator allows for either QAM256 or QAM64 for SDMET 901 and SDMET 902 and only QAM64 for SDMET 904 Select the desired Constellation then press the OK button to set FEC Use the Scroll Up Down button to select FEC Press the OK button to enter the FEC menu Use the Scroll Up Down button to select the desired FEC values then press the OK button to set Menu options are 3 4 5 6 7 8 The factory default is 3 4 GUARD INTERVAL Use the Scroll Up Down button to select GUARD INTERVAL Press the OK button to enter the GUARD INTERVAL menu Menu options are 1 4 1 8 1 16 1 32 The factory default is 1 16 Use the Scroll Up Down button to select the desired GUARD INTERVAL and press the OK button to set OFDM MODE Use the Scroll Up Down button to select OFDM MODE Press the OK button to enter the OFDM MODE menu Menu options are 2K 8K The factory default is 2K Use the Scroll Up Down button to select the desired OFDM MODE and press the OK button to set RF Output Use the Scroll Up Down button to select RF Output Press the OK button to enter the RF Output menu Menu options are Normal Inverted and C W The factory 10 SDMET Series Manual V1 0 Thor Digital default is Normal Use the Scroll Up Down button to select the desired RF Output and press the OK button to set Brightness Use the Scroll Up Down button to select Brightness
Download Pdf Manuals
Related Search