Weather Station with Radio-Controlled Alarm Clock and
Contents
1. 4 CHANNEL key e Press it once to switch between Channel 1 2 and 3 e Press and hold it for 2 seconds to view the channels automatically Press it again to exit the automatic display mode e In time setting mode press it to increase the setting values 5 SET CLOCK key e In normal time mode press it once to enter the normal time setting mode e In normal time setting mode press it to step the setting items Press and hold it to exit the setting mode in any step 6 MIN MAX key e Press it to show the minimum and maximum temperature records in the past 24 hours e Press and hold it for 3 seconds to delete the minimum and maximum temperature records e In time setting mode press it to decrease the setting values 7 SENSOR key e Press it once to search a sensor e During the reception period press and hold it for 3 seconds to stop the reception 8 C F slide switch e Slide it to switch between Celsius and Fahrenheit 9 ALARM ON OFF key e Press it once to turn on the backlight and display the alarm time for 5 seconds e Press it again to turn on off the alarm 10 SET ALARM key e Press it once to turn on the backlight for 5 seconds and press it again to enter the alarm time setting mode e In alarm time setting mode press it to step the setting items 11 RESET key e Press it to return all values to default values e Incase of malfunction the unit may be required to reset 12 RCC key e In n2. SET ALARM key to save and exit the setting mode QS indicates alarm is ON x Normal time mode Alarm time setting mode Note ink The alarm will be automatically turned on when you set the alarm time During the alarm time setting period press and hold CHANNEL or MIN MAX key to speed up the change of settings USING ALARM FUNCTION Follow the directions above to set the alarm time In normal time mode press ALARM ON OFF key once to display the current alarm time Press it again to turn alarm ON OFF TO SILENCE THE ALARM Press SNOOZE LIGHT to silence the alarm for 8 minutes The will be flashing Nn nN 2 Press any other key to turn the alarm off and activate it again after 24 hours 3 If no key is pressed within 120 seconds the alarm will be turned off and be activated again after 24 hours READING INDOOR AND OUTDOOR TEMPERATURE RECORDS Slide C 2F switch to select between Celsius and Fahrenheit Note If no signals are received or the transmission is interfered will appear on the display Replace the batteries if the batteries are low relocate the sensor or main display unit away from electronic devices or hit the reset buttons on the main display unit and sensor VIEWING THE MINIMUM AND MAXIMUM TEMPERATURE RECORDS In normal mode press MIN MAX key twice to show the minimum indoor amp outdoor temperature records
3. in the past 24 hours iS 2 Press it again to show the maximum temperature records 3 Press it again to exit Note Press and hold it for 3 seconds to delete the minimum and maximum temperature records MAX temperature records MIN temperature records WEATHER FORECAST INDICATOR This product forecasts the next 12 to 24 hours of weather within a 30 50 km 19 31 mile radius with a 75 accuracy Sunny Slightly Cloudy Cloudy Rainy USING ICE ALERT FUNCTION If the outdoor temperature range is 2 0 C 3 0 C 28 4 F 37 4 F the ice alert indicator light will be turned on and flash BATTERY REPLACEMENT If the low battery icon turns on next to the outdoor temperature reading replace the sensor s battery with 2 AAA batteries If the low battery icon turns on next to the indoor temperature reading replace the sensor s battery with 2 AA batteries Low battery indicator Note Attention Please dispose of the used unit or batteries in an ecologically safe manner Sf PLACEMENT OF MAIN UNIT AND SENSOR For the sensor place the screw on the desired wall and hang the sensor by the recessed hole in the back of it or simply place it on the desktop For the main unit you can just place it on the table by itself b Se SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT 81 x 38 x 137 mm LxWxH 3 19 x 1 5 x 5 39 in Weight 198g Signal frequency 433 MHz Temperatur
4. Block C 9 F Kaiser Estate Phase 1 41 Man Yue St Hung Hom Kowloon Hong Kong is in conformity with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation 2009 Oregon Scientific All rights reserved
5. C8313A Size A4 OreGcon SCIENTIFIC Weather Station with Radio Controlled Alarm Clock and Ice Alert Model EW93 USER MANUAL Thank you for your purchase of this Weather Station Please read these instructions carefully and keep the manual well for future reference The receiver unit has a clear and easy to read display that shows the indoor temperature time the maximum amp minimum temperature records in the past 24 hours the weather forecast icon as well as the outdoor temperature measured and transmitted from the remote sensors It is able to receive and display readings from up to 3 remote sensors The 433 MHz technology means no wire installation is required and you can place the sensors within 30m 100ft from the main indoor unit This product is designed to synchronize its date and time automatically once it is within range of the WWVB 60 signal from the atomic clock in Fort Collins Colorado OVERVIEW RECEIVER OND of 1 SNOOZE LIGHT key e n normal time mode press it once to turn on the backlight for 5 seconds e Press it to silence the current alarm when it is going and enter the snooze mode for 8 minutes 2 LCD display e Displays weather forecast icon outdoor amp indoor temperature Automatically switches Time and Date in 5 seconds interval 3 Ice Alert indicator light e Flashes when the outdoor temperature is between 2 0 C 28 F and 3 0 C 37 F
6. care instructions for information e The contents of this manual may not be reproduced without the permission of the manufacturer e Do not dispose old batteries as unsorted municipal waste Collection of such waste separately for special treatment is necessary e Please note that some units are equipped with a battery safety strip Remove the strip from the battery compartment before first use Note The technical specifications for this product and the contents of the user manual are subject to change without notice ABOUT OREGON SCIENTIFIC Visit our website www oregonscientific com to learn more about Oregon Scientific products If you re in the US and would like to contact our Customer Care department directly please visit www2 oregonscientific com service support For international inquiries please visit www2 oregonscientific com about international FCC STATEMENT This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
7. d but won t flash and i Outdoor The sensor s cannot be found after temperature operating the main unit for 15 minutes Area Note When the sensor signal is received the icon will be displayed on the LCD OPERATING THE SENSOR 1 Remove the battery door and slide CHANNEL switch to CH 1 When using additional sensors make sure each sensor is assigned a different CHANNEL number 2 Insert 2 new AAA batteries matching polarities 3 Press the RESET key 4 Slide the battery door back on Note Place the sensor in location away from direct sunlight and rain e Do not place the sensor more than 30 m 100 ft from the main indoor unit Position the sensor so that it faces the main indoor unit minimizing obstructions such as doors walls and furniture e Place the sensor in a location with a clear view to the sky away from metallic or electronic objects e Position the sensor closer to the main unit during cold winter months as below freezing temperatures may affect battery performance and signal transmission The transmission range may vary depending on many factors You may need to experiment with various locations to get the best results Standard Alkaline batteries contain significant amounts of water Because of this they will freeze in low temperatures of approximately 12 C 10 F Disposable Lithium batteries have a much lower threshold
8. e range 5 C to 50 C 23 F to 122 F Temperature 1 29 resolution pee Cet Ice alert 3 to 2 C temperature range 37 F to 28 F Power 2x AA 1 5V batteries REMOTE UNIT EW 99 58 x 23 x 100 mm LxWxH 2 28 x 0 9 x 3 94 in Weight 52g Signal frequency 433 MHz Number of channel 3 Transmission range 30 m 98 ft unobstructed Temperature range 20 C to 60 C 4 F to 140 F Power 2x AAA 1 5V batteries Note We recommend that you use alkaline batteries with this product for longer usage and lithium batteries in temperatures below freezing PRECAUTIONS e Do not subject the unit to excessive force shock dust temperature or humidity e Do not cover the ventilation holes with any items such as newspapers curtains etc e Do not immerse the unit in water If you spill liquid over it dry it immediately with a soft lint free cloth e Do not clean the unit with abrasive or corrosive materials e Donottamper with the unit s internal components This invalidates the warranty e Only use fresh batteries Do not mix new and old batteries e Images shown in this manual may differ from the actual display e When disposing of this product ensure it is collected separately for special treatment and not as normal household waste e Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible Consult the furniture manufacturer s
9. for temperature with an estimated freezing range of below 30 C 22 F Wireless ranges can be impacted by a variety of factors such as extremely cold temperatures Extreme cold may temporarily reduce the effective range between the sensor and the base station If the unit s performance fails due to low temperature the unit will resume proper functioning as the temperature rises to within the normal temperature range i e no permanent damage will occur to the unit due to low temperatures RECEPTION OF RADIO CONTROLLED TIME SIGNAL The time and calendar are radio controlled The current time and calendar are automatically synchronized with the atomic clock signal from Fort Collins Colorado When used for the first time after inserting batteries or pressing RESET key the clock will start to search for the atomic clock signal and the signal reception icon will flash for 5 minutes SIGNAL RECEPTION INDICATOR The wave segment flashing means time signals are being received The signal quality could be classified into 3 types N No signal Weak signal Excellent signal Note The unit will automatically search for the time signal at 2 00am 3 00am or 4 00am is also available if the signal is not received at 2 00am 8 00am 2 00pm and 20 00 each day 2 Always place the unit away from electrical devices such as televisions computers telephones etc 3 Avoid placing the unit on or next to metal plates 4 f
10. ormal time mode press it once to receive the RC signal for reception testing 13 BATTERY COMPARTMENT e Accommodates 2 AA size batteries 14 BATTERY DOOR LCD DISPLAY Weather forecast icon Sensor signal Channel Low battery indicator Min and Max temperature Time and Calendar Signal reception indicator C amp F Outdoor temperature 10 Indoor temperature 11 Time zone indicator ONDINA N a AON SENSOR 1 LED indicator e Flashes when the remote unit transmits a reading 2 Wall mounting holder e Supports the sensor on the wall 3 RESET key e Press itto restart the sensor and return all values to default values 4 CHANNEL slide switch e Assign the sensor to channel 1 2 or 3 5 BATTERY COMPARTMENT e Accommodates 2 AAA size batteries 6 BATTERY DOOR RECEPTION OF SENSOR SIGNAL OPERATING THE MAIN UNIT 1 Remove the battery door and insert 2 new AA size batteries as per the polarity information marked on the battery compartment Press RESET key to restart the clock Slide C F switch to select between Celsius and Fahrenheit 4 Slide the battery door back on 5 Press CHANNEL key to select the desired on channel Main unit is searching for the sensor s L _ LB the icon will be flashing LE The sensor s cannot be found Sensor 1 has been found LiD the icon will be displaye
11. possible place the unit next to a window Signal reception is greatly decreased when located in closed areas like basements or metal buildings 5 Do not start reception in moving vehicles or trains TIME AND CALENDAR MANUAL SETTING If you are out of reach of the Radio Controlled sensor or if the reception is not reachable the time and calendar can be set manually As soon as the signal of sensor is received again the clock will automatically synchronize with the exact time and calendar 1 In normal time mode press SET CLOCK key once to enter the time setting mode 2 Press CHANNEL or MIN MAX key to change the settings Press SET CLOCK to confirm The setting order is 12 24 hr format time time zone offset year day month format date 4 Press SET CLOCK key to save and exit the setting mode w is gt IAs so anni 12 24 Hr setting Time setting Ti 3 a N a o g 3 a Month Date setting M D DM setting Year setting Note T During the setting period press and hold CHANNEL or MIN MAX key to speed up the change of settings 2 The time zone indicators are abbreviated as below P Pacific M Mountain C Central E Eastern ALARM TIME SETTING 1 In normal time mode press SET ALARM key once to enter the alarm time setting mode 2 Press CHANNEL or MIN MAX key to set hour minute 3 Press
12. to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales Please visit our website at www2 oregonscientific com service support for all inquiries We Name Oregon Scientific Inc Address 19861 SW 95th AVe Tualatin Oregon 97062 USA Telephone No 1 800 853 8883 Declare that the product Product No EW93 Product Name Weather Station with Radio Controlled Alarm Clock and Ice Alert Manufacturer IPM Concepts Limited Address
Download Pdf Manuals
Related Search