Home

User Manual

image

Contents

1. D description Name Description DC Input 12V Input Battery Equipment running using the internal battery In Use Call in progress OFF Not registered on the network Blinking 4s Poor signal Blinking 2s Weak signal Blinking 0 5s Good signal ON Excellent signal Generic Output ATENTION This step should only be made by lift companies To allow the remote control of a specific module of the lift a relay circuit was added with the outputs NO Normally Open and NC Normally Connected being available to the user to best fit on the needs The pinout is described on the image below NO COM NC Page 6 User Manual Configuration To configure the equipment if the online platform is not being used it is necessary to send an SMS to the SIM card inserted with the following format MONIT360 Equipment ID UT Command Data Where Equipment ID Serial Number available on the back of the equipment Command RESET to perform a remote reset to the Lift or CONF to change the configuration of the equipment Data When sending the command RESET this field should be left empty If the command is CONF the number that will be dialed when the panic button on the Lift is pressed should be inserted here Examples Changing the emergency call number MONIT360 A150600100000 UT CONF 351912345678 Perform a reset to the Lift MONIT360 A150600100000 UT RESET Page 7 For questions or tec
2. LiftMonit User Manual Version 1 0 2015 User Manual Description The Monit360 Lift is more than a GSM equipment for emergency calls on lifts By adopting this solution you will have access to a GSM equipment and also to an online platform that allows you to remotely manage all the installed equipment s Thanks to the online platform the Monit360 Lift allows the connection of sensors and configure alerts to be sent to the person in charge in case of some fail occurs It also offers the possibility to remotely actuate a sensor like perform a reset to the lift This possibility reduces the number of times that a technician has to go to the installation site Features Bi directional communication S Remote configuration v There s no necessity to configure the telephone installed on lift you just need to configure the number to be dialed on the GSM and leave the telephone as it is v With our GSM solution installed on your lifts the update upgrade of the firmware running on the units is automatic and ensures that all new standards laws are being followed It is required a data connection v Backup battery in case of power failure Page 2 User Manual Optional Features Remote configuration of the units using the online platform Monit360 Lift Possibility to remotely perform a reset of the lift Constant monitoring of the power input and in case of failure a notification will be sent to the onl
3. hnical support please contact info monit360 com
4. ine platform Technical Specifications amp Quad Band 850 900 1800 1900 MHz GPRS multi slot class 10 8 GPRS mobile station class B Compliant with GSM phase 2 2 O Class 4 2 W 850 900 MHz O Class 1 1 W 1800 1900Mhz GPRS class 10 max 85 6 kbps downlink AC adapter O Input AC 110V 240VAC 50 60Hz O Output 12VDC 2A Temperature 20 C 70 C Battery 7 4V 1100mAh Page 3 User Manual Package content Name Quantity Description LiftMonit 1 AC adapter AC 110 230V DC 12V 1A Antenna SMA Antenna Plastic dowels 5mm User Manual Installation For the installation please follow the following steps 1 Open the unit slide the metallic part of the SIM card holder insert the SIM card and slide back the metallic lid to close the holder Page 4 User Manual 2 Fix the unit to the wall using the supplied screws and the plastic dowels 3 Plug the AC adapter to a plug and plug it on the DC input of the equipment DC Input ON OFF Phone line Generic RJ11 Output 4 Plug the RJ11 plug that come from to the lift in one the two available inputs on the GSM equipment 5 Turn the ON OFF switch to the ON position and the led DC Input should be automatically lighted up according with the image below After some seconds led Signal should start blinking indicating that the unit is registered and ready to be used ffi ta 2 f eg Page 5 User Manual LE

Download Pdf Manuals

image

Related Search

Related Contents

転写パットリくん A3フラットベッドスキャナー Ver.2  DELL PowerEdge VRTX  特記仕様書(PDF:501.9KB)  

Copyright © All rights reserved.
Failed to retrieve file