BeTwin ES User Manual
Contents
1. You may verify the working status of the keyboard by pressing the Windows key The start menu should be displayed You may verify the working status of the mouse by moving it The mouse cursor should move For the BeTwin ES software to work correctly the Station s USB Keyboard and USB Mouse must be configured to use Microsoft native USB Keyboard and USB Mouse driver respectively All third parties USB Keyboard and USB Mouse drivers and or utilities need to be uninstalled If the mouse and keyboard still do not work properly please contact the manufacturer of those devices for assistance At this point the VGA card adapter monitor USB mouse and USB keyboard should be working properly with Windows You may now install the BeTwin ES software 4 2 Enabling the Windows Multi Monitor feature under Windows 8 8 1 After successfully installing the PCI E DualHead DualView VGA card or USB VGA adapter by default the Windows Multi Monitor feature is disabled To enable the Windows Multi Monitor feature of the VGA card adapter under Windows 8 8 1 32 bit amp 64 bit follow the instructions below Go to Windows Control Panel select the option Adjust screen resolution under Appearance and Personalization The next message box to appear will provide the options for enabling the Windows Multi Monitor feature of the VGA card adapter Double click on the second monitor under the Change the appear2. If you have already registered BeTwin you will not need to re register BeTwin ES software after upgrading the latest BeTwin ES software 11 Technical Support Technical support offered by ThinSoft Pte Ltd BeTwin products must be registered with ThinSoft before technical support may be offered Registration may be completed by registering online at our World Wide Web site Free support is offered for sixty 60 days from the date of registration Our technical staff is available to answer questions troubleshoot problems and to assist in the installation of BeTwin products Before requesting technical support please be prepared to provide information including the date and place of purchase and product serial number ______________________ http www thinsoftinc com ThinSoft Pte Ltd 23 Tai Seng Drive 06 00 Singapore 535224 Fax 65 6289 7308 Email support thinsoftinc com Support hours 9 00am to 5 00pm local time
3. 4 1 Installing the BeTwin Hardware 6 4 2 Enabling the Windows Multi Monitor feature under Windows 8 8 1 9 4 3 Installing the BeTwin ES software 11 4 4 Configuring the BeTwin Station Using Configuration Wizard 16 4 5 Configuring the BeTwin Station Manually 18 4 6 Using the Locator Buttons 20 4 7 Keyboard Mouse Locator 21 4 8 Sound Device Locator 22 4 9 Logging onto the Station automatically under Windows 8 8 1 22 4 10 Using the BeTwin Control Center 24 4 10 1 Station Mode 24 4 10 2 User Mode 24 4 10 3 Message Mode 26 4 10 4 Eventlog Mode 27 4 10 5 Menu Options 27 5 Logging onto the Computer for the First Time 30 6 Shutting Down Windows in Windows 8 8 1 30 7 Adding Software or Hardware 30 8 Troubleshooting Guide 31 9 Registration Licensing 32 9 1 Demo Version 32 9 2 Purchase Internet Registration 33 10 Updating BeTwin 39 11 Technical Support 39 4 1 Introduction to BeTwin ES Product Description BeTwin ES is the software that allows multiple users to simultaneously and independently shares a computer running Windows 8 8 1 32 bit amp 64 bit Windows RT is not supported Installation is simple Install a second VGA card USB video adapter and connect it to the second monitor Plug in a USB mouse USB keyboard and optionally USB speakers Finally install the BeTwin ES software Additional VGA cards adapters monitors USB mice keyboards and s
4. option produces the message box Clicking the arrow allows for selecting where the message will be sent 27 4 10 4 Event log Mode Event log mode is selected by clicking on the event log button Event log mode is used to display event log messages for troubleshooting purposes Only events relating to the BeTwin ES software are displayed 4 10 5 Menu Options Additional options are available from the menu bar at the top of the Control Center The Program menu allows for exiting the BeTwin Control Center or for shutting down Windows The Users menu has several features Users Configuration brings up the Windows User Accounts applet Statistics displays a utility that monitors system resource use Show Programs displays all tasks running on both Host and BeTwin Stations The Stations menu allows entry into Station Mode to configure a station The Messages menu allows access to Message Mode as well as to Event log Mode 28 The Options menu can be used to select different languages for the BeTwin Control Center if desired The Set Configuration selection on the Options menu is used to disable the BeTwin ES software for testing purposes It is also recommended that the BeTwin ES software be disabled prior to any hardware changes are made to the system It is also necessary to disable the BeTwin ES software and reboot prior to either uninstalling BeTwin or before updating the BeTwin ES software to a newe
5. to complete the setup 15 Step 9 After system reboots to Windows user must log into the computer as an Administrator with full access rights You should see a window similar to the one below on Windows Desktop Click OK to proceed with the Configuration Wizard Step 10 When prompted to select the keyboard you must select OK with the keyboard you wish to use for the respective station When prompted to select the mouse you must click OK with the mouse you wish to use for the respective station When the Configuration Wizard is completed you will be prompted to restart Windows similar to the Window shown below Click OK to complete the Configuration Wizard 16 4 4 Configuring the BeTwin Station Using Configuration Wizard If you have not run the BeTwin Station Configuration Wizard during the software installation or if your hardware configuration has changed you can still run the Configuration Wizard from the BeTwin Control Center Step 1 Right click the BeTwin Control Center icon and then select Run as administrator to open BeTwin Control Center Click on Station Configuration on the BeTwin Control Center Step 2 The Configuration Wizard feature enables BeTwin to auto assign the USB mice and keyboards to their respective BeTwin Stations To auto assign the USB audio speakers you need to connect the peripherals USB mouse keyboard and speakers of each BeTwin Station to its USB Hub re
6. Control Center Help About BeTwin Step 3 You should see a screen that looks like the one below Click on the Internet Registration button 34 Step 4 You should see a screen that looks like the one below Click on the OK button Step 5 When OK is clicked this will invoke your web browser and link you to the BeTwin Registration web page Important Notes for Internet Registration 1 You must purchase register BeTwin ES from the computer on which it has been installed i e NOT from any other computer Hence please ensure that you have installed BeTwin ES software on the computer where you intend to deploy it and make sure BeTwin ES is working correctly in demo mode and meeting your requirement before proceeding with the purchase registration process 2 Make sure you have logged into the Windows 8 8 1 32 bit amp 64 bit as an Administrator with full access rights 3 For the purchase or registration process to work correctly you will need to run Microsoft s Internet Explorer 32 bit with Administrator privileges If you are not running Microsoft s Internet Explorer 32 bit with Administrator privileges please close Microsoft s Internet Explorer 32 bit and follow the instructions described below to run Microsoft s Internet Explorer 32 bit in Administrator privileges To run Internet Explorer with Administrator privileges on the Start screen click on the Desktop icon On the Desk
7. The BeTwin Control Center can be used to manage BeTwin hardware and software options It allows you to manage users on the system It also provides tools to assist you in troubleshooting any problems The Control Center runs in four modes Stations Users Messages and Event log The four buttons are used to select the mode Each mode has a different face designed to assist you to do your work 4 10 1 Station Mode When the Control Center starts it is in Station mode If you are in another mode you can select Station mode by clicking on the Station button Station mode is used to configure a station and send a message to a station 4 10 2 User Mode User mode is selected by clicking on the user button User mode is used to add remove or customize each user s account 25 Clicking on the Users Configuration option invokes the Windows User Accounts applet that is used to add delete or customize user profile settings Note You must have the administrative privileges in order to use the Windows User Accounts applet For more information regarding the Windows User Account applet please see Windows help Any changes made to the user profiles will not take effect until the system is restarted 26 4 10 3 Message Mode Message Mode is selected by clicking on the message button Message mode is used to send messages to another user or to check messages Clicking the Send a Message
8. not able to get the BeTwin Station s to work please contact support thinsoftinc com with the information and screen shots captured for items 1 to 9 listed above 9 Registration Licensing 9 1 Demo version When initially installed BeTwin runs in demo mode While in demo mode you can evaluate BeTwin before you purchase During the evaluation period you can use up to eight BeTwin stations After the period BeTwin ES will terminate all BeTwin Station s If you do wish to purchase BeTwin you will need to access our web site to purchase and register the software 33 9 2 Purchase Internet Registration Note You must purchase register BeTwin ES software from the computer on which it has been installed i e NOT from any other computer Hence please ensure that you have installed BeTwin ES software on the computer where you intend to deploy it and make sure BeTwin is working correctly in demo mode and meeting your requirement before proceeding with the purchase registration process For Internet Registration you will need to use Microsoft s Internet Explorer for this purpose Though the BeTwin Registration menu will pop up at times when you opened BeTwin Control Center it is also possible to get to this Registration menu from the BeTwin Control Center user interface Step 1 On the Windows Desktop right click on the BeTwin Control Center icon and then click Run as administrator Step 2 Click on BeTwin
9. on each of the Host s and Station s monitors to use the Keyboard or Mouse to select for the Host or Station s 32 Notes a when prompted to use the Keyboard for selection you must use the Keyboard to select and must not use the Mouse to select b when prompted to use the Mouse for selection you must use the Mouse to select and must not use the Keyboard to select 6 Please disable the Windows UAC User Account Control feature restart Windows and check if any error message is displayed when Windows boots up 7 Open BeTwin Control Center click on Station Configuration and check to make sure that BeTwin Station 1 gt Hardware consists of a PCI E VGA device USB Keyboard USB Mouse and USB Audio optional Please do the same checks for the rest of the BeTwin Stations if any Capture a screen shot of each of the Stations configuration in JPEG format 8 Open BeTwin Control Center click on Messages gt Eventlog Messages and advise the error messages if any Capture a screen shot of the Eventlog Messages in JPEG format 9 Open BeTwin Control Center gt Help gt About and check if the following are listed as follow BeTwinServiceW8 dll 2 00 Started BeTwinSystemVS sys 2 00 Started Additionally capture a screen shot in JPEG format of the details displayed for the following a BeTwin Status b Serial Number c Maximum users d License expiration day e Install directory 10 If you are still
10. 1 THINSOFT PTE LTD 23 Tai Seng Drive 06 00 Singapore 535224 Fax 65 6289 7308 www thinsoftinc com BeTwin ES User Manual Document Version 2 0 2 BeTwin ES User Manual Copyright 2007 2013 ThinSoft Pte Ltd All rights reserved ThinSoft Pte Ltd 23 Tai Seng Drive 06 00 Singapore 535224 Fax 65 6289 7308 This document is being furnished by ThinSoft Pte Ltd for information purpose only to licensed users of the BeTwin software product Efforts are made to ensure the accuracy of the information presented but is subject to change without prior notice Changes if any will be incorporated in future releases BeTwin is the registered trademark of ThinSoft Pte Ltd Other brand and product names are the trademarks or registered trademarks of the respective holders Microsoft is a registered trademark and Windows Windows Vista Home Basic Windows Vista Home Premium Windows Vista Business Windows Vista Ultimate Windows 7 Windows 8 and Windows 8 1 are the registered trademark of the Microsoft Corporation IBM and PC AT are the registered trademarks of International Business Machines Corporation No part of this document may be reproduced for commercial purposes unless prior permission is obtained from the copyright holder Visit our Web Site at http www thinsoftinc com 3 Table of Contents 1 Introduction to BeTwin ES 4 2 Installation Overview 5 3 Hardware Guidelines 5 4 BeTwin Installation 6
11. Policy gt Select Security Settings gt Local Policies gt User Right Assignment gt Shut down the system v Add Remove User or Group to determine which users who are logged on locally to the computer can shutdown the Windows 7 Adding Software or Hardware Installing new hardware It is recommended prior to installing any new hardware that the BeTwin ES software first be deactivated This is done in the BeTwin Control Center under the Options menu with the utility Set Configuration Please refer to the Menu Options in the section Using the BeTwin Control Center of this manual for more detail on the use of this utility 31 8 Troubleshooting Guide When initially installed BeTwin ES runs in demo mode While in demo mode you can evaluate BeTwin ES before you purchase During the evaluation period you can use up to eight BeTwin stations After the period BeTwin ES will terminate all BeTwin Station s Note After Windows boots up it will take approximately 10 seconds for the BeTwin Station s to start up If the BeTwin Station does not start up please check the following 1 Please try the following a Logon into Windows as an Administrator uninstall the BeTwin ES software and restart Windows b Logon into Windows as an Administrator install the latest BeTwin ES software available for download from www thinsoftinc com and re run Configuration Wizard to re setup the Host and Station s
12. ance of your displays section Under the Adapter tab it will show the name of the VGA card adapter 10 To enable the Windows Multi Monitor feature of the VGA card adapter select the option Extend these displays under the multiple display section You may change the Colors and Resolution options for the VGA card adapter in the Advanced settings Click the OK button The monitor connected to the VGA card adapter should now display the same background color and pattern as the Host monitor You may drag your mouse all the way to the right the mouse cursor should now appears on the Station monitor This means that the Windows Multi Monitor feature is working correctly Note Unless the VGA cards adapters are working correctly in Windows 8 8 1 Multi Monitor mode BeTwin ES will not work In other words you have to get the VGA cards adapters to work correctly in Windows 8 8 1 Multi Monitor mode before installing BeTwin ES If you are not able to get the VGA cards adapters to work correctly in Windows 8 8 1 Multi Monitor mode please consult your PC and VGA cards adapters vendors for assistance on how to get the VGA cards adapters to work correctly in Windows 8 8 1 Multi Monitor mode 11 4 3 Installing the BeTwin ES Software The BeTwin ES software should only be installed after the hardware has been successfully installed and tested At this point the VGA ca
13. c Check if the Station s can start up 2 Open Windows Device Manager then double click on Display adapters the VGA devices installed will be listed Please check Windows has correctly detected and initialized the VGA devices If the VGA device is not working correctly there should be an exclamation mark displayed next to it Note down each of the VGA devices listed manufacturer model and chipset type etc Double click on each of the VGA devices click on Driver and note down the details of the Driver Provider Driver Date Driver Version and Digital Signer 3 Before installing the BeTwin ES software within Windows Display Settings were you able to configure the BeTwin Station s VGA to Extend my Windows desktop onto this monitor so that the Windows desktop was displayed on both the Host s and BeTwin Station s monitors 4 Before installing the BeTwin ES software were the BeTwin Station s USB Keyboard USB Mouse and USB Audio optional verified to be working correctly Note for the BeTwin ES software to work correctly the Station s USB Keyboard USB Mouse and USB Audio must be configured to use Microsoft native USB Keyboard USB Mouse and USB Audio driver respectively All third parties USB Keyboard USB Mouse and USB Audio drivers and or utilities need to be uninstalled 5 After you have installed the BeTwin ES software and ran Configuration Wizard to setup the Host and Station s were you prompted
14. ernet Registration button Step 2 Microsoft Internet Explorer will be launched and directed to the BeTwin ES Registration site Select the language you wish to use to register BeTwin ES 37 Step 3 If you have purchased BeTwin ES prepaid serial number s enter the prepaid serial number s and click the Register New Serial Numbers button If you do not have BeTwin ES prepaid serial number s and want to purchase register BeTwin ES license online select the option Check this box if you would like to purchase additional user licenses and click Create New License and Purchase BeTwin button 38 Step 4 Enter the information requested and click Continue with Registration Step 5 Once BeTwin ES is successfully registered you will need to restart Windows 39 10 Updating BeTwin If you wish to update your BeTwin ES software to the most recent version you can so by downloading it from our web site 1 Download the BeTwin demo from http www thinsoftinc com Once this file is saved onto your hard disk locate it and double click the filename setup exe 2 You need not have to uninstall the current BeTwin ES software prior to installing the latest BeTwin ES software 3 Follow the instructions on the screen 4 Restart the computer after successfully installing the BeTwin ES software You have now successfully updated your BeTwin ES software to the most recent version
15. ers can configure the setting to Manual Force detecting cards as DualView to force Configuration Wizard to detect the VGA card as a DualHead DualView VGA card Default is Automatic automatically detect DualView cards Note The Set DualView Detection feature is currently not supported The Help menu provides the BeTwin help Index as well as BeTwin version information 30 5 Logging On to the Computer for the First Time Windows Login Step 1 Click on the user name appears on Windows logon screen that is created in Windows User Accounts applet For more information regarding the Windows User Account applet please see Windows help Step 2 Type in the password of the user name that is created in Windows User Accounts applet Step 3 Hit enter key or click on the Submit button Note You can create as many names and passwords as needed in the Windows User Accounts applet There is no limit on the number of users that may be created 6 Shutting Down Windows in Windows 8 8 1 To restrict the shutdown option to users with Administrator privileges the user s right assignment needs to be configured accordingly To change the user s right assignment in Windows 8 8 1 32 bit amp 64 bit i Do a right click at the left corner bottom of the Windows screen and then click Control Panel ii Select System and Security iii Select Administrative Tools iv Double click on Local Security
16. ke organizing the peripherals easier In the above picture the station1 mouse is being indicated 22 4 8 Sound Device Locator To use the Sound Device Locator first click to highlight a sound device in the Hardware Configuration screen which will cause the Sound Locator button to un gray Clicking the locator button will cause a sound to play from the speakers connected to that device Note The Sound Locator is designed primarily for locating USB sound devices 4 9 Logging onto the Station automatically under Windows 8 8 1 The Login Configuration feature enables user to specify the username and password to use at an individual BeTwin station to automatically log on the station User can also specify a program to run automatically Step 1 Right click the BeTwin Control Center icon and then select Run as administrator to open BeTwin Control Center Click on Station Configuration on the BeTwin Control Center 23 Step 2 You should see a window similar to the one below Click on Login Configuration Step 3 Enter the default username and password to use at an individual BeTwin station and deselect the Always prompt for password check box You can also specify a program to run automatically under the Initial Program and Working Directory Note The usefulness of setting the working directory will depend on the application being run 24 4 10 Using the BeTwin Control Center
17. mum recommendation Equivalent AMD processors are also supported The computer must have at least one available USB port and an available PCI E slot if PCI E VGA card is to be used for Station Memory For Windows 8 8 1 32 bit the minimum requirement for 2 users is 1 Gigabytes of RAM For Windows 8 8 1 64 bit the minimum requirement for 2 users is 2 Gigabytes of RAM 256 MB of additional RAM or more is recommended for each additional station depending on the applications the user will be running Station Hardware Each user requires a PCI E DualHead DualView VGA card or USB video adapter The VGA card USB video adapter must support the Windows 8 8 1 Multi Monitor feature Most recent VGA cards USB video adapters do support this function If you have any concerns it is best to contact the VGA card USB video adapter vendor The BeTwin user also requires a USB keyboard and USB mouse If sound is required at the station USB speaker can be used 6 4 BeTwin Installation 4 1 Installing the BeTwin Hardware Before installing the BeTwin ES software you must first install the additional PCI E DualHead DualView VGA card or USB VGA adapter monitor USB mouse and USB keyboard These are not included with the BeTwin ES software and must be installed separately Step 1 Install the additional PCI E VGA card into slot if PCI E VGA card is to be used for Station i Ground yourself by touching the metal chassis of the computer wi
18. nfiguration Step 5 Now select the hardware to be used for station 20 Note The display mouse and keyboard will already have been selected for the station Each station must have a VGA card adapter mouse and keyboard In addition audio joystick or other hardware may be assigned Note Some computers equipped with an Intel 810 815 built in display adapter do NOT have a BIOS option to force that adapter to be the primary display and will need to assign the Intel 810 815 display adapter to the station and use the added PCI E adapter as the Host display To add a piece of hardware to a station highlight the item by clicking on it in the Free Hardware window then click on the gt gt button You will then see the hardware appear in the Station Hardware window To remove a piece of hardware from a station click on the item in the Station Hardware window Click on the lt lt button and it will move from the Station Hardware to the Free Hardware window When the station hardware is configured correctly click on OK This will return you to the Station Configuration windows Click on OK again When prompted to restart Windows click on OK After the computer has rebooted the BeTwin station is ready for use 4 6 Using the Locator Buttons Locator Buttons is only applicable if you are configuring
19. peakers can be installed to support up to eight additional users Hardware Requirements BeTwin requires an available PCI E slot if PCI E VGA card is to be used for Station At least one USB Connector must be available for the connection of USB VGA adapter keyboard and mouse Hardware Options BeTwin requires a standard PCI E DualHead DualView VGA card or USB video adapter for the additional user In order to be used by BeTwin the VGA card USB video adapter must support the Windows 8 8 1 feature If you have any questions ask the vendor of the VGA card adapter if it supports Windows 8 8 1 Multi Monitor feature A monitor is required for the additional user Alternately if you have installed a VGA card that supports a TV out option a television can be used instead The additional user requires a USB keyboard and mouse Any USB keyboard and mouse can be used Many USB keyboards allow additional USB devices to be connected directly to the keyboard These are recommended as they increase the number of USB devices that can be attached to the system The PCI E DualHead DualView VGA card or USB video adapter monitor USB keyboard and USB mouse are not sold with BeTwin ES software and must be purchased separately Note With BeTwin ES software installed on Windows 8 8 1 32 bit and 64 bit DirectX features or Display Hardware Acceleration is not fully supported on Host PC and BeTwin Station s Please verify BeTwin ES i
20. r version When selected the Set Configuration option presents the following options A reboot is required before either selected option will take effect The Set Secure Shutdown selection on the Options menu is used to modify Windows shutdown availability It can be configured to allow any user to shutdown the system or restrict the shutdown option to users with Administrator privileges Restricting shutdown to Administrators requires a user with administrator privileges to log in to shutdown the system When selected the Set Secure Shutdown option presents the following options 29 The Security Policy Settings User Accounts in Windows need to be configured accordingly when the option Only Administrators can shutdown the system is selected To change the User Accounts Settings in Windows 8 8 1 32 bit amp 64 bit follow the instructions under the section Shutting Down Windows in Windows 8 8 1 A reboot is required before either selected option will take effect The Set Shutdown Messages selection on the Options menu allows users to customize the shutdown message sent to the BeTwin stations when Start Shutdown is selected When selected the Set Shutdown Messages option presents the following options The Set DualView Detection selection on the Options menu is used to configure the way Configuration Wizard detects DualHead DualView VGA cards Some Dual Head DualView VGA cards may not be detected correctly us
21. rd adapter Windows Multi Monitor feature should work as described above and the additional USB mouse and keyboard should both be working properly with Windows You are now ready to install the BeTwin ES software It is necessary to first download the BeTwin ES software from the www thinsoftinc com web site Once this file is saved onto your hard disk locate it and double click the filename setup exe Step 1 User must log into the computer as an Administrator with full access rights to install BeTwin ES software After logging into Windows 8 8 1 run the BeTwin ES setup exe file Click Next to proceed Step 2 After reading and accepting the license agreement click on the Next button to continue with the BeTwin ES software installation 12 Step 3 You should see a window similar to the one below Click on the Next button Step 4 To install the BeTwin ES software to the default folder click Next to proceed 13 Step 5 You should see a screen that looks like the one below Ensure that you have checked the box to run the BeTwin ES Station Configuration Wizard after system reboots Step 6 Check the box to create a desktop icon Click Next to proceed 14 Step 7 Review the settings Click Install to proceed or Back to modify the settings Step 8 Once the BeTwin ES software is successfully installed you will be prompted to restart your computer Click Finish
22. rom then select the option PCI or PEG c Under the BIOS CMOS Setup options selection select Integrated Peripherals Init Display First then select the option Enabled Step 3 Windows will now detect the VGA card and may ask for the Windows disk or VGA driver disk supplied with the VGA card Please refer to the VGA card user manual for installation instructions Step 4 In some cases Windows may detect the VGA card and install with the built in Windows drivers automatically without prompting for the Windows disk or driver disk supplied with the VGA card Notes I VGA Drivers Support on Windows 8 8 1 32 bit and 64 bit Only WDDM driver model version 1 2 and above supports multiple drivers in a multi adapter multi monitor setup i From what we have tested following are the ATi PCI E VGA cards tested to be working on the BeTwin Station Radeon HD 4350 Radeon HD 6850 Radeon HD 6670 ii The following are the nVidia PCI E VGA cards tested to be working on the BeTwin Station GeForce 6600GT GeForce 6800GT GeForce 7100GS GeForce 8600GT GeForce 7100GS GeForce 9300GE GeForce GT 240 GeForce GT 520 GeForce GT 440 GeForce GTS 250 8 iii DualHead DualView VGA card Support BeTwin ES supports DualHead DualView VGA card under Windows 8 8 1 when the DualHead DualView VGA card is configured For the Host using the primary VGA ou
23. s to work correctly in Windows 8 8 1 Multi Monitor mode please consult your PC and VGA cards adapters vendors for assistance on how to get the VGA cards adapters to work correctly in Windows 8 8 1 Multi Monitor mode Step 5 After successfully installing the VGA card by default the Windows Multi Monitor feature is disabled Please refer section 4 2 below on how to enable Windows Multi Monitor 9 Step 6 After enabling the Multi Monitor feature of the VGA card adapter the monitor connected to the VGA card adapter should now display the same background color and pattern as the Host monitor You may drag your mouse all the way to the right the mouse cursor should now appears on the Station monitor This means that the Multi Monitor feature is working correctly If you cannot see this please contact the pc or VGA card adapter vendor for assistance Step 7 Connect the USB mouse and USB keyboard to the computer following the manufacturer s instructions Step 8 Windows will now detect the USB equipment and may ask for Windows disk or USB driver disk supplied with the USB equipment Refer to the instructions supplied with the mouse and keyboard to direct you through this portion on the installation It is possible at this point that Windows has already detected and installed the new hardware properly and may not request any additional drivers Step 9 The USB mouse and USB keyboard can be tested by its effect on the Host screen
24. s working correctly in demo or trial mode and is meeting your requirements including the performance before you proceed to purchase amp register BeTwin ES licenses online Manufacturer s Notice The BeTwin ES software allows multiple users to simultaneously and independently share the same hardware and software on a computer Some software is licensed for use on a single computer while other software may be licensed for single or multiple users It is the responsibility of the BeTwin purchaser user to read and comply with the licensing agreements of any software that may be used on a BeTwin Station 5 2 Installation Overview Installation is simple By following these steps a two to nine users system should take less than 30 minutes to set up Each step is explained in detail in the following pages Step 1 Install the additional VGA card adapter with Windows Multi Monitor feature enabled following the manufacturer s instructions Step 2 Connect the USB mouse and keyboard following the manufacturer s instructions Step 3 Test the hardware to ensure that it works properly with Windows Step 4 Install the BeTwin ES software Terminology The original computer display keyboard and mouse are used by one user This user is called the Host A display USB mouse and USB keyboard are added for the additional user This user is called the Station 3 Hardware Guidelines CPU A Pentium IV 2 8 GHz processor is the mini
25. spectively Click on Configuration Wizard 17 Step 3 You should see a window similar to the one below Click OK to start the Configuration Wizard Step 4 Click OK to reboot the computer Step 5 Follow the instruction on the screen Click OK to proceed with the Configuration Wizard Select OK with the Keyboard you wish to use at the respective station If prompted click OK with the Mouse you wish to use at the station When the Configuration Wizard is completed you will be prompted to restart Windows Click OK 18 4 5 Configuring the BeTwin Station Manually For most BeTwin installations running the Configuration Wizard is sufficient for configuring the system Optionally you can configure the system manually or you can use manual configuration to change the hardware assignments created by the Configuration Wizard To assign the hardware to each BeTwin Station manually Step 1 Right click the BeTwin Control Center icon and then select Run as administrator to open BeTwin Control Center Click on Station Configuration on the BeTwin Control Center Step 2 You should see a window similar to the one below Click on Add Station 19 Step 3 Rename the station or leave the name as BeTwin Station You can also change the name later Click OK Step 4 You should see a window similar to the one below Click on Hardware Co
26. th your fingers ii Shut down your computer switch off the power and unplug it from the electrical outlet Remove the cover from the computer and locate an available PCI E slot iii Remove the PCI E VGA card from its anti static bag iv Insert the PCI E VGA card into the PCI E slot gently until it sits securely into place Secure the chrome bracket of the PCI E VGA card to the computer Ensure that no other card have been accidentally pushed out of their slots v Put the case back onto your computer vi Connect the second monitor cable to the VGA connector of the PCI E VGA card vii Plug the power cable back to the electrical outlet before power on your computer 7 Step 2 Upon the power on of the Host PC boot up display should appear on the Host PC s monitor screen Otherwise go into the Host PC s BIOS CMOS Setup to select the option to boot up from PCI or PCI E VGA first E g the following are examples where different types of PCs have different options to boot from the PCI or PCI E VGA first If you are not sure if your PC has such an option kindly refer to your PC s documentation or contact your PC Manufacturer s Technical Support a Under the BIOS CMOS Setup options selection select Integrated Peripherals Init Display First then select the option PCI or PEG b Under the BIOS CMOS Setup options selection select BIOS Features Setup VGA Boot f
27. the system manually or using the manual configuration to change the hardware assignments created by the Configuration Wizard If there is more than one BeTwin station it can be confusing determining which mouse keyboard or sound device should be assigned to each station Using the locator buttons can help ease this confusion Step 1 Right click the BeTwin Control Center icon and then select Run as administrator to open BeTwin Control Center Click on Station Configuration follow by click on Hardware Configuration then you should see a window similar to the one below Click on Keyboard Mouse Locator button 21 Step 2 Select Deactivate BeTwin original configuration follow by click on Update button Step 3 Click on OK to reboot the system Note Make sure BeTwin is enabled after devices have been assigned to each station Right click the BeTwin Control Center icon and then select Run as administrator to open BeTwin Control Center Within BeTwin Control Center select Options Set Configuration Activate BeTwin to enable it 4 7 Keyboard Mouse Locator To locate a particular peripheral first click the keyboard mouse locator button and then press either a key on any USB keyboard or a button on any USB mouse The display in the Hardware Configuration screen will indicate which keyboard or mouse has been activated Once identified using the Set Different Name utility will ma
28. top screen locate the Internet Explorer icon on the Taskbar Right click on the Internet Explorer icon move the mouse pointer to Internet Explorer and then right click on Internet Explorer and click on Run as administrator see screen shot below 35 A User Account Control prompt will appear you will need to click on the Yes button to run Internet Explorer with Administrator privileges 4 Within Internet Explorer click on Tools gt Internet Options gt Security Set the Security level for this zone to Medium and click on the OK button to apply the changes This is what the WinConnect Server Registration site requires in order to successfully complete the purchase amp registration process Notes When prompted to install and run the ThinSoft and or the SheriffNet Module ActiveX controls you must click on the Yes button to install and run the ActiveX controls Please wait for each page to load completely before proceeding to the next page 36 BeTwin ES Software Internet Registration Step 1 On the Windows desktop right click on the BeTwin ES Control Center icon and then click Run as administrator Click on the BeTwin ES Control Center icon located on your desktop This will launch the BeTwin ES Control Center First select Help from Control Center menu and then select About BeTwin from the Help Sub menu You should see a screen that looks like the one below Click on the Int
29. tput of the DualHead DualView VGA card and BeTwin Station using the secondary VGA output to the DualHead DualView VGA card For one BeTwin Station using the primary VGA output of the DualHead DualView VGA card and another BeTwin Station using the secondary VGA output to the DualHead DualView VGA card The following are the ATi PCI E DualHead DualView VGA card tested to be working on the BeTwin Station Radeon HD 4350 DualView Radeon HD 6850 DualView Radeon HD 6670 DualView The following are the nVidia PCI E DualHead DualView VGA cards tested to be working on the BeTwin Station GeForce 6600GT GeForce 6800GT GeForce 7100GS GeForce 8600GT GeForce 7100GS GeForce 9300GE GeForce GT 240 GeForce GT 520 GeForce GT 440 GeForce GTS 250 The following is the USB VGA adapter tested to be working on the BeTwin Station DisplayLink USB VGA Adapter For VGA cards adapters not listed above please consult your PC and VGA vendors regarding Windows 8 8 1 compatibility and the availability of Windows 8 8 1 VGA drivers that will work correctly on Windows 8 8 1 Multi Monitor mode Note Unless the VGA cards adapters are working correctly in Windows 8 8 1 Multi Monitor mode BeTwin ES will not work In other words you have to get the VGA cards adapters to work correctly in Windows 8 8 1 Multi Monitor mode before installing BeTwin ES If you are not able to get the VGA cards adapter
Download Pdf Manuals
Related Search