Short form(standard-51series)
Contents
1. MANUAL PUSH D WDR ON OFF WDR LEVEL Mirror ON OFF 3D DNR LSC OFF LOW MID HIGH AUTO ON OFF DEFOG Smart IR OFF MANUAL AUTO ON OFF Day amp Night System ICR Optional Lens Operating Temperature Humidity C CS Mount 20 C 60 C 30 80 Storage Temperature Humidity 30 C 60 C 20 90 Supply Voltage Only DC 12V AC 24V DC 12V AC 90 240 Current 110mA 80mA 200mA Power Consumption 1 4W 2W 2 4W Recommended Voltage 20 Current Adapter with rated power of 2 times than real using current Dimension 61 W x 55 H x 106 L mm Design and specifications are subject to change without notice PRODUCT WARRANTY CARD 1 ITEM 4 2 S N 3 INSTALLATION CONDITION Indoor _ Outdoor Power supply SPECIFICATION DC12V ac24v CURRENT mA 4 TROUBLESHOOTING No picture f Bad image No power Water damage LEDON _ OFF ETC C Please keep this warranty card with the manual Please fill out this warranty card and send us this warranty card with the faulty units together E Following cases can be charged even within the warrany period a When defects are caused by user s carelessness b When improper or unauthorized repairs are done or when the inside is modified or damaged c Defects caused by natural disaster or power problem d When the warranty2. conductor inside the lens cable Please remove the cover of the autoiris lens connection plug and solder the lens cable to the connector pin in the plug Damping No 3 Pin Drive No 3 Pin x Lens cable No 3 IK ff No 1 Pinn No 4 Pin connector No 2 Pin Please fit the auto iris lens connector plug and take off the lens protection cap and then attach the auto iris lens to the camera by screwing it in clockwise Please insert the connection plug that is connected to the auto iris lens cable into the auto iris lens connector which is located on the back ofthe camera 2 When using a CS Mount lens Please take off the lens protection cap and attach the CS Mount lens to the camera by screwing it in clockwise 3 When using a C Mount lens Please take off the lens protection cap and attach the C mount adaptor 2 Power Be sure to connect power only after all installation is complete Please use a power adaptor that meets the required standards Recommended Voltage 20 Current Adapter with rated power of 2 times than real using current 3 RS485 option The camera can be controlled by using external controllers like a remote controller Connect the RS485 cable to the connection port of the 485 control that is connected to the DVR or System Controller Use the PELCO D protocol When controlling RS485 please check the following Communication Speed 480
3. 0 bps Data Bit Number 8 bits Stop Bit Number 1 bit Parity Bit none RS485 RS485 Fl lo oo 0100 DVR Monitor l 5 Setup Menu Flow EXPOSURE LENS AGC SENSE UP BACK LIGHT 3D DNR RETURN WHITE BALANCE WB MODE R Y GAIN B V GAIN RETURN DAY amp NIGHT D amp N MODE BURST C_SUP S_SUP SMART IR RETURN IMAGE ADJUST MIRROR SHARPNESS GAMMA LSC DEFOG MONITOR RETURN MOTION MOTION AREA SENSITIVITY DISPLAY HOLD TIME ALARM OUTPUT RETURN DC MANUAL OFF LOW MID HIGH AUTO OFF X2 X4 X8 X16 X32 X64 X128 X256 X512 X1024 OFF BLC BLC LEVEL lt OFF LOW MID HIGH gt HLC D WDR SET LEVEL lt 0 20 gt OFF LOW MID HIGH AUTO ATW MANUAL PUSH AUTO COLOR B amp W EXT EXT2 ON OFF lt 0 100 gt lt 0 100 gt ON OFF OFF MIRROR lt 0 30 gt 0 45 0 55 0 65 USER lt 0 2 1 0 gt OFF ON lt 0 30 gt OFF MANUAL AUTO CRT LCD OFF ON AREA1 AREA4 lt 1 30 gt OFF MESSAGE TRACE lt 0 15 gt OFF ON PRIVACY MA DOT SEL DOT XY MOVE XY COLOR SET lt 1 8 gt MASK8 DOT SEL DOT XV MOVE XV COLOR SET lt 1 8 gt RETURN SPECIAL LANGUAGE 11 Language OSD COLOR COLOR1 COLOR8 OSD TRANS 0 15 TITLE COMMUNICATION OFF ON ID lt 0 255 gt BAUD RATE lt 2400 4800 9600 gt PROTOCOL lt PELCO D gt DPC OFF AUTO FACTORY SET NO YES R
4. 700 TVL D WDR 3D DNR STANDARD CAMERA USER S MANUAL E Sony 1 3 960H CCD II M High Resolution 700TV Lines E D WDR Wide Dynamic Range E 3D DNR Digital Noise Reduction E Smart IR Function IM LSC Lens Shading Compensation M DEFOG E Dav amp Night ICR Optional M Intelligebt Motion Detection E Back Ligiht Compensation IM PELCO D RS485 Option E Privacy Mask Polygonal 8 Colors E O S D menu function 9 001 1312 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and
5. ETURN SAVE amp EXIT EXIT RETURN l 6 Special Features 1 D WDR Wide Dvnamic Range D WDR captures the images at all light levels by correcting GAMMA CURVE If you use an ordinary camera in a scene with an intensive backlight the object will be displayed dark on the monitor affected by the backlight To solve this problem you can use the D WDR function to improve the dark part without saturation from bright part You can adjust SET LEVEL to get clearer images EXPOSURE LENS DC D WDR AGC MID ee sere SET LEVEL 003 fuit a 3D DNR AUTO RETURN RETURN 2 HLC This function is to mask the bright color You can select 4 mask areas and DAY amp NIGHT and adjust HLC level EXPOSURE HLC LENS gt HBLC MANUAL 4 AGC MODE ALL DAY SENS UP HLC LEVEL 003 afi gt BACK LIGHT MASKI ON 4 3D DNR MASK2 ON 4 RETURN MASK3 ON 4 MASK4 ON 4 RETURN 3 3D DNR Digital Noise Reduction Select 3D DNR ON or OFF 3D DNR function reduce the background noise in a low luminance environment Upgraded 3D filtering ensures even more clear image DNR Level High Picture image is more clear but Ghost is more increased DNR Level Low Picture image is not clear but less Ghost MAIN MENU EXPOSURE gt EXPOSURE LENS DC 4 WHITE BALANCE AGC MID None Au ne BACKLIGHT D WDR MOTION gt 3D DNR AUTO 4 PRIVACY SPECIAL RETURN EXIT 4 SMART MOTION With learning capability it memorizes the previous screen on the movement of the subj
6. GAMMA CURVE If you use an ordinary camera in a scene with an intensive backlight the object will be displayed dark on the monitor affected by the backlight To solve this problem you can use the D WDR function to improve the dark part without saturation from bright part You can adjust SET LEVEL to get clearer images 700 TVL ULTRA HIGH RESOLUTION en The horizontal resolution of 700 TV Lines with 960H CCD It gives avividimage output with super high horizontal resolution using our own De Mosaic Interpolation algorithm and a specialised built in sharpness filter 3D DNR Digital Noise Reduction u Achieves excellent 3D DNR 3 Dimensional Digital Noise Reduction function very excellently by using upgraded 3D filtering and enables to keep this function automnal ien ty wile operating the camera to provide the clear and superior images in very low light luminance The SAMRT 3D DNR will be work automatically if There is any movement or motion Also this can be focus on the object in reduce the Ghost Effect caused by moving object to it self Smart IR Function LSC Lens Shading Compensation DEFOG The Camera is able to recognize the concerntration of fog in the image and automatically defog correct image of the bad weather such as fog rain mist fumes etc to make it clear Sens Up x1024 Achieves high quality pictures by supporting a long exposure time more than 1 50second and enables recognition of the
7. can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do NOT use power sources other than that specified IM Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes Precaution Do not Keep the camera face to strong light directly Do not install the camera in extreme temperature conditions Do not disassemble the camera even if troubles happened To avoid malfunctions never use the camera close to a gas or oil leak Do not drop the camera or subject them to physical shocks Do not expose the camera to rain or spill beverage on it Do not install the camera under unstable lighting conditions Do not install or use the camera in an environment where the humidity is high 1 Features D WDR Wide Dynamic Range _ Delivers a powerful Wide Dynamic Range to the camera to provide D WDR captures the images at all light levels by correcting
8. card is not filled out or corrected unconfirmed
9. ect approximately in 3 to 5 seconds When there is a change the alarm function goes off MAIN MENU MOTION EXPOSURE gt MOTION ON WHITE BALANCE AREA al DAY amp NIGHT SENSITIVITY 007 If IMAGE ADJUST DISPLAY TRACE gt MOTION HOLD TIME 003 IJIEM PRIVACY ALARM OUTPUT OFF SPECIAL RETURN EXIT 7 SPECIFICATIONS TV System NTSC PAL Sensor Sony 1 3 960H CCD II Total Pixels H 1020 x V 508 H 1020 x V 596 Effective Pixels Synchronization H 976 x V 494 H V 15 734 59 94Hz H 976 x V 582 H V 15 625 50Hz Scanning System 2 1 Interlace Horizontal Resolution Min Illumination Sens Up Off 700 TV Lines 0 12 Lux 15IRE 0 2Lux 30IRE 0 4Lux 50IRE F1 2 Video Output V Correction 0 0002Lux 15IRE 0 0005Lux 30IRE 0 0008Lux 50IRE F1 2 1 0Vp p 750hm Video 0 71Vp p 0 45 0 55 0 65 USER Monitor CRT LCD S N More than 52dB AGC off 0 5 D LENS AGC SENS UP BACK LIGHT BLC HLC D WDR 3D DNR WHITE BALANCE DAY amp NIGHT MIRROR SHARPNESS GAMMA MONITOR LSC DEFOG MOTION PRIVACY MASK1 MASK8 LANGUAGE OSD COLOR OSD TRANS COMMUNICATION DPC Electrical Shutter 1 60 1 100 000 1 50 1 100 000 Privacy Masking 8 Windows Polygonal 8 Colors Day amp Night AUTO COLOR BW EXT EXT2 Motion Detection ON OFF Sens Up Low Shutter AUTO OFF x1024 Language 11 Language White Balance ATW
10. ise serious damage can influence in the inner parts of the camera DC12V DC12V AC24V AC 220V 1 Auto iris lens connector This is the connection terminal for auto iris lens 2 Video composite Out 3 Power lamp Light up when the correct power is supplied to the camera 4 Setting button OSD Jovstick ENTER button Use for menu displav This button can be used to confirm settings after changing the value of the selected function or current conditions UP amp DOWN buttons Use for selecting items by moving the cursor up or down on the menu screen LEFT L amp RIGHT R buttons Use when changing item values by moving the cursor to the left or right on the menu screen 5 RS 485 Oprional The camera can be controlled bv using external controller like a remote controller 6 Power input terminal Connect to the power appropriate to each power requirement 12V DC or 24V AC or 90 240V AC l 4 Installation 1 Lens Lenses are sold separatelv Lenses such as auto iris lens CS Mount lens and C Mount lens can be used Note How to operate this product effectivelv e Please keep lens clean Any foreign objects and finger marks on the lens can cause inferior image quality in low light conditions 1 When using an auto iris lens Please peel off about 8mm of the outer skin of the auto iris lens cable Please peel off about 2mm of the outer skin of the insulated
11. shape and color of a suspended object under no light conditions POLYGONAL PRIVACY MASKING Polygonal 8colors Ensures privacy protection for private and specific areas on the video signal output using a polygonal masking function It allows the size and position of the masking areas to be controlled very easily and there are 8 mask areas which are user programmable color brightness and mosaic HLC Enables the recognition of a visible car license plate by blocking unwanted light sources HIGH SENSITIVITY TRUE DAY amp NIGHT u The Day amp Night function delivers high quality color rendition and converts automatically into monochrome as luminance levels drop 2 Components D WDR 3D DNR Camera L Wrench Manual 3 Names and Functions of Parts 1 Front Lens protection cap Please cover while it is out of use 2 CS Mount lens adaptor Please attach the CS Mount lens here 3 Back Focus clamp screw Please loosen the clamp screw with a screwdriver before adjusting the Back focal length 4 Mounting bracket screw hole Please use the screw hole when fixing the camera onto the mounting bracket Please use 4 20 UNC 20 THREAD the clamp screw ass ified in L 4 5mm 0 2mm ISO standard A p pec ed or 0 197 ASA standard the picture The mounting bracket can be separated and attached to the top of the camera In this instance please do not tighten the screw to a depth of more than 5mm otherw
Download Pdf Manuals
Related Search