56-VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER
Contents
1. z GO POWER HEDGE TRIMMER OPERATING MANUAL 56 VOLT LITHIUM ION CORDLESS HEDGE TRIMMER WARNING To reduce the risk of injury the user must read and understand the Operator s Manual before using this product Save these instructions for future reference GO TABLE OF CONTENTS Read All acude 3 Safety AL 4 Safety Instructions cece eee eee eee 5 12 daro en oo PR 13 Specifications 13 Dong e PP qa de ere areca 14 Packing List 0 cece ccc cece II 15 DOSCHDHO area arp a pan a ar a ips 15 16 ONE ae Re gece RE 17 22 Maintenance a saa vesc 23 25 Troubleshooting a 26 27 pe EUM 28 29 am mac em esa 30 2 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO READ ALL INSTRUCTIONS READ amp UNDERSTAND INSTRUCTION MANUAL This Hedge Trimmer has many features for making its use more pleasant and enjoyable Safety performance and dependability have been given top priority in the design of this product making it easy to maintain and operate A DANGER People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker 44 WARNING ensure safety an2. 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 21 GO SIDE CUTTING When trimming the sides of the hedge begin at the bottom and cut upwards see Fig 8 Trim the side of a hedge so that it will be slight narrower at the top This shape will expose more of the hedge resulting in a more uniform growth SAWING FUNCTION Although the blade gap allow wood to be cut up to 22mm the tip of the blade is designed to cut wood up to 26mm see Fig 9 If a radical cut is necessary cut a little at a time in several stages TIP PROTECTOR The tip protector makes cutting near the ground or along walls easier while protecting the special cutters from damage 22 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO MAINTENANCE 4k WARNING When servicing use only identical replacement parts Use of any other parts may create a hazard or cause product damage To ensure safety and reliability all repairs should be performed by a qualified service technician CLEANING 4h WARNING To avoid serious personal injury always remove the battery pack from the product when cleaning or performing any maintenance m Use a soft brush to remove debris from all air intakes and cutting blade To remove pitch and other sticky residue spray the blades with resin solvent Run the motor briefly so that the solvent is event distributed m Wipe the surface with a dry cloth AX WARNING Never use water for clea
3. 1300 000 346 This manual contains important information on to the safe assembly operation and maintenance of your hedge trimmer Read it carefully before using the hedge trimmer Keep this manual handy so you can refer to it at any time SERIAL NUMBER DATE OF PURCHASE YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE SPECIFICATIONS Voltage 56V No Load Speed 1300 min Cutting Length 61cm Cutting capacity 22mm Weight Without battery pack blade guard 2 79 kg 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 13 GO ASSEMBLY 4k WARNING if any parts are damaged or missing do not operate this product until the parts are replaced Use of this product with damaged or missing parts could result in serious personal injury 44 WARNING Do not attempt to modify this product or create accessories not recommended for use with this hedge trimmer Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury A WARNING To prevent accidental starting that could cause serious personal injury always remove the battery pack from the tool when assembling parts UNPACKING This product has been shipped completely assembled Carefully remove the product and any accessories from the box Make sure that all items listed in the packing list are included Inspect the tool care
4. Do not use on a ladder rooftop tree or other unstable support Stable footing on a solid surface enables better control of the hedge trimmer in unexpected situations Never allow children to operate the hedge trimmer Never remove or tamper with safety devices Check their proper operation regularly Never do anything to interfere with the intended function of a safety device or to reduce the protection provided by a safety device Never operate the hedge trimmer without proper guards plates or other safety protective devices in place Check damaged parts before further use of the hedge trimmer A guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment of moving parts binding of moving parts breakage of parts mounting and any other condition that may affect its operation A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 11 GO Check the blade and motor mounting bolts at frequent intervals for proper tightness Also visually inspect blade for damage e g bent cracked and worn Replace the blade only with a blade from the original equipment manufacturer OEM Replace the blade if it is bent or cracked An unbalanced blade causes vibration that could damage the motor dr
5. LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E SAFETY INSTRUCTIONS This page depicts and describes safety symbols that may appear on this product Read understand and follow all instructions on the machine before attempting to assemble and operate GO A Safety Alert Indicates a potential personal injury hazard Read the Operator s To reduce the risk of injury user must read Manual operator s manual ORO Do not expose to rain WARNING Do not use in the rain or leave outdoors while it is raining V Volt Voltage A Amperes Current Hz Hertz Frequency cycles per second W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 5 GO n No Load Speed Rotational speed at no load min Per Minute Revolutions per minute SPM Strokes Per Minute Stroke speed at no load D 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO GENERAL POWER TOOL SAFETY WARNINGS AX WARNING Read all safety warnings and instructions Fail to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool WORK AREA SAFETY
6. all fasteners and caps and do not operate this product until all missing or damaged parts are replaced APPLICATION You may use this product for the purposes listed below Trimming and the forming of hedges shrubs and bushes with a branch diameter of less than 22mm 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 1 GO TO INSTALL REMOVE BATTERY PACK Fig 2 amp 3 A WARNING Always remove the battery pack from the product when you are assembling parts making adjustments cleaning or when not in use Removing the battery pack will prevent accidental starting that could cause serious personal injury NOTE Fully charge the battery pack before first use TO INSTALL Fig 2 Align the ribs of the battery pack with the mounting slots in the hedge trimmer s battery port Press the battery pack down until it snaps into position NOTE Make sure that the latch on the hedge trimmer snaps into place and the battery pack is secured to the tool before beginning operation TO REMOVE Fig 3 AX WARNING Always be aware for the location of your feet children or pets when pressing the battery release button Serious injury could result if the battery pack falls NEVER remove the battery pack at a high location Press the battery release button the battery pack will disengage from the latch Grasp the battery pack and remove it from the hedge trimmer Press to Release
7. 18 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E HOLDING THE HEDGE TRIMMER GO The unit has both a front and rear handle With the blade directed away from you hold the unit by both handles The switch lever in the front handle can be activated on any of the three sides giving you many choices for a comfortable grip when performing cutting operations Fig 4 5 amp 6 44 WARNING Always keep both hands on the hedge trimmer handles Never hold shrubs with one hand and operate the hedge trimmer with the other Failure to heed this warning may result in serious injury STARTING STOPPING THE HEDGE TRIMMER Before starting the hedge trimmer Make sure you have a secure and balance footing Stand upright and hold the hedge trimmer in a relaxed position Remove the blade guard Make sure the cutting blade is not touching the ground or any other objects Hold the unit with both hands one hand on the rear handle and one hand on the front handle LL Na KA 57 Qu Ay KAY LO JI 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 19 GO TO START THE HEDGE TRIMMER Your hedge trimmer is equipped with two switch levers Both switch levers need to be pressed for the hedge trimmer to start Depress and hold the switch lever in the front handle and press the switch lever in the rear handle to start the hedge trimmer TO STOP THE HEDGE TRIMMER Move hedge trimmer away from cu
8. 9 3 Bent or damaged teeth 3 Replace with a new blade Contact EGO service center for blade replacement service found on page 29 4 Loose blade bolts 4 Tighten the blade bolts Using a wrench turn the bolt clockwise to tighten 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 21 GO WARRANTY EGO WARRANTY POLICY 5 year limited warranty on EGO outdoor power equipment and 3 year limited warranty on EGO Power System battery packs and chargers Please contact EGO customer service on 1300 000 EGO 1300 000 346 any time you have questions or warranty claims LIMITED SERVICE WARRANTY FOR FIVE YEARS from the date of original retail purchase this EGO product is warranted against defects in material or workmanship Defective product will receive free repair FOR THREE YEARS from the date of original retail purchase the EGO Power System battery pack and charger are warranted against defects in material or workmanship Defective product will receive free repair This warranty does not cover routine maintenance parts and consumables that can wear out from normal use within the warranty period a This warranty applies only to the original purchaser at retail and may not be transferred b The warranty period for any EGO product or part used for industrial professional or commercial purpose is one year This warranty is void if the product has been used for rental purpose d This warranty doe
9. EDGE TRIMMER HT2400E 25 GO TROUBLESHOOTING PROBLEM CAUSE SOLUTION Hedge trimmer doesn t work 1 The battery pack is not 1 Attach the battery pack to the attached to the hedge hedge trimmer trimmer 2 No electrical contact 2 Remove battery check con between the trimmer tacts and reinstall the battery and battery pack 3 The battery pack 3 Charge the battery pack is depleted 4 The battery pack is 4 Remove the battery pack too hot from the tool and allow it to cool until the temperature drops below 67 C Release both switch levers allow the trimmer to cool until the temperature drops below 77 C 5 The hedge trimmer is 5 too hot Depress the switch levers on the front and rear handle simultaneously 6 The two switch levers 6 are not depressed simultaneously Remove the battery pack from the tool remove the obstruction carefully then reinsert the battery and restart the tool 7 The blade is jammed 7 26 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO PROBLEM CAUSE SOLUTION Excessive vibration or noise 1 Dry or corroded blades 1 Lubricate the blades following the section LUBRICATING THE BLADE found on page 24 in this manual 2 Blades or blade 2 support is bent Replace with a new blade or support Contact EGO service center for blade or support replacement service found on page 2
10. ITHIUM ION CORDLESS HEDGE TRIMMER MODEL NUMBER HT2400E The Model Number will be found on the Nameplate attached to the housing of the hedge trimmer Always mention the Model Number when ordering parts for this tool EXPLODED VIEW INDEX NUMBER PART NO DESCRIPTION QTY 1 3124359000 Blade Guard 1 2 2823715000 Nut and Washer Set for blade 8 3 2823057000 Guard and Screw Set 1 3 0 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E
11. Keep work area clean and well lit Cluttered or dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating a power tool Distractions can cause you to lose control ELECTRICAL SAFETY Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock If operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the risk of electric shock 56V
12. LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO PERSONAL SAFETY Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewelry Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and pro
13. d reliability all repairs and replacements should be performed by a qualified service technician 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 3 GO SAFETY SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers The safety symbols and the explanations with them deserve your careful attention and understanding The symbol warnings do not by themselves eliminate any danger The instructions and warnings they give are no substitutes for proper accident prevention measures AX WARNING Be sure to read and understand all safety instructions in this Operator s Manual including all safety alert symbols such as DANGER WARNING and CAUTION before using this tool Failure to following all instructions listed below may result in electric shock fire and or serious personal injury SYMBOL MEANING SAFETY ALERT SYMBOL indicates DANGER WARNING OR CAUTION May be used in conjunction with other symbols or pictographs AX WARNING The operation of any power tools can result in foreign objects being thrown into your eyes which can result in severe eye damage Before beginning power tool operation always wear safety goggles or safety glasses with side shields and a full face shield when needed We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields Always use eye protection complying with Australian Standards AS1337 1 2010 4 56V
14. e depressed simultaneously Blades Steel blades for cutting hedges and shrubs Blade Guard The blade guard keeps the operator from coming in contact with the sharp blades when the tool is not in use It also helps keep the blades from being nicked or damaged when the tool is in storage Tip protector Protecting the blade and protecting the special cutters from damage when cutting near the ground or along walls Battery Release Button Press to release the battery pack from the tool Latch Locks the battery pack in place when installed on the tool Ejection Mechanism Aids in removing the battery Mounting Slot Guides the battery pack 16 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO OPERATION A WARNING Do not allow familiarity with this product to make you careless Remember that a careless fraction of a second is sufficient to inflict serious injury AX WARNING Always wear eye protection with side shields marked to comply with AS1337 1 2010 along with hearing protection Failure to do so could result in objects being thrown into your eyes and other possible serious injuries 4k WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product The use of attachments or accessories not recommended can result in serious personal injury Before each use inspect the entire product for damaged missing or loose parts such as screws nuts bolts caps etc Tighten securely
15. e of purchase Any handling and transportation costs and other expenses incurred in claiming this warranty are not covered by this warranty and will not be borne by Chervon The replacement product or part or repaired product will be made available for your collection at an address nominated by Chervon Where a valid warranty claim is made Chervon will replace the defective product or repair the fault Where the product is repaired Chervon may use refurbished parts This warranty does not cover normal wear and tear misuse or abuse This warranty may also be further limited or voided as specifically detailed in the product Manual Chervon has no other liability under this warranty The benefits to you given by this warranty are in addition to other rights and remedies imposed by State and Federal legislation that cannot be excluded Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Chervon Australia Pty Ltd Unit 13 1488 Ferntree Gully Rd Knoxfield VIC 3180 Phone Number 1300 000 EGO 1300 000 346 Email address support egopowerplus com au 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 29 GO PARTS LIST 56V L
16. fully to make sure no breakage or damage occurred during shipping Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool f any parts are damaged or missing please return the product to the place of purchase 14 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO PACKING LIST PART NAME QUANTITY Hedge Trimmer 1 Blade Guard 1 Operating manual 1 DESCRIPTION KNOW YOUR HEDGE TRIMMER Fig 1 d Front Handle Rear Switch L Hand Guard Rear Handle Tip Protector Electric Contacts Ejection Mechanism Switch ii Lever Battery Release Button Ga r Mounting Slot WARNING The safe use of this product requires an understanding of the information on the tool and in this operator s manual as well as knowledge of the project you are attempting Before use of this product familiarize yourself with all operating features and safety rules Hand Guard Helps protect hand from cutting and deflect chips or other debris away from the operator s hands 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 15 GO Front Handle For easy control of the tool during cutting work Rear Handle Ergonomic handle with overmold improves comfort and grip Front Switch Lever Rear Switch Lever The hedge trimmer can be started only if both of the switch levers in rear and front of the handle ar
17. ive unit or cause personal injury If the equipment should start to vibrate abnormally stop the motor and check immediately for the cause Vibration is generally a warning of trouble The trimmer shall be used to cut stems less than 22mm thick Trim only in daylight or in good artificial light Remove or disconnect battery before servicing cleaning or removing material from the hedge trimmer Do not wash with a hose avoid getting water in motor and electrical connections When servicing use only identical replacement parts listed in this manual Use of parts which do not meet the original equipment specifications may lead to improper performance and compromised safety Follow instructions for lubricating and changing accessories Keep handles dry clean and free from oil and grease Save these instructions Refer to them frequently and use them to instruct others who may use this tool If you loan this tool to someone else also loan these instructions to them to prevent misuse of the product and possible injury SAVE THESE INSTRUCTIONS 12 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO INTRODUCTION Congratulations on your selection of a new generation of 56V Lithium ion powered hedge trimmer It has been designed engineered and manufactured to give you the best possible dependability and performance Should you experience any problem you cannot easily remedy please contact EGO customer service center 1300 000 EGO
18. mer with dull or damaged cutting blades This may cause overload and will give unsatisfactory cutting results LUBRICATING THE BLADE Fig 11 For best operation and longer blade life lubricate the hedge trimmer blade with light weight machine oil before and after each use 1 Remove the battery pack from the hedge trimmer l Ph PS PS PS PS PS fh 2 Lay the hedge trimmer on a flat surface Apply a light weight machine FX PDT ey oil along the edge of the top blade If you will be using the hedge trimmer for an extended period it is advisable to stop remove the battery and oil the blade during use 24 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO NOTE Do not oil while the hedge trimmer is running TRANSPORTING AND STORING Always place the blade guard on the blade before storing or transporting the hedge trimmer Use caution to avoid the sharp teeth of the blade Clean the hedge trimmer thoroughly before storing Store the hedge trimmer indoors in a dry place that is inaccessible to children Keep away from corrosive agents such as garden chemicals and deicing salts AX WARNING Blades are sharp When handling the blade assembly wear non slip heavy duty protective gloves Do not place your hand or fingers between blades or in any position where they could get pinched or cut NEVER touch blades or service the unit with battery pack installed 56V LITHIUM ION CORDLESS H
19. ning your trimmer Avoid using solvents when cleaning plastic parts Most plastics are susceptible to damage from various types of commercial solvents Use clean clothes to remove dirt dust oil grease etc Protecting the environment Do not dispose of electrical appliances as unsorted municipal waste use separate collection facilities Contact your local government for information regarding the collection systems available If electrical appliances are disposed of in landfills or dumps hazardous substances can leak into the groundwater and get into the food chain damaging your health and well being 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 23 GO SHARPENING THE CUTTING BLADE Start and stop your hedge trimmer until the cutter blade and the guard are 10 slightly offset Fig 10 This will allow clearance for the file between cutter teeth and guard teeth Wh Ph fh fh fh Ph fff 2 Remove the battery pack from you hedge trimmer Cutter Tooth Guard Tooth 3 Clamp the blade assembly in a vise and file the exposed cutting surface of each blade tooth Remove as little material as possible Be sure to retain the original angle of each tooth when filing 4 Remove the hedge trimmer from the vise restart it and stop it to expose the unsharpened edges of the blade teeth 5 Remove the battery pack and repeat the sharpening procedure above NOTE Do not operate your hedge trim
20. ns taking into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E 9 GO BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause burns or a fire Under abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contact eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained HEDGE TRIMMER SAFETY WARNINGS Keep all parts of the body away from the cutter blade Do not remove cut material or hold material to be cut when blades are moving Make sure the
21. perly used Use of dust devices can reduce dust related hazards 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO POWER TOOL USE AND CARE Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and more safely at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tools operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control Use the power tool accessories tool bits etc in accordance with these instructio
22. s cords lights wire or string which can become entangled in the cutting blade and create a risk of serious personal injury 20 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO Before starting the hedge trimmer maintain proper footing and balance and do not overreach Wear safety goggles non skid footwear and rubber gloves Hold the unit with both hands with the cutting blades directed away from you Always use the hedge trimmer properly Keep from trimming too much at one time This can cause the blades to bind and slow reducing the cutting efficiency Do not force the hedge trimmer through heavy shrubbery This can cause the blades to bind and slow down If the blades slow down reduce the pace of your work When trimming new growth use a wide sweeping action so that the stems are fed directly into the cutting blade Older growth will have thicker stems and will be trimmed most easily by using a sawing movement Always cut stems or twigs that are less than 22mm thick Use a non powered hand saw or pruning saw to trim large stems TOP CUTTING Use a wide sweeping motion see Fig 7 A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results If desired you can use a string to help guide you as you cut your hedge level Decide how high you want the hedge Then stretch a piece of string along the hedge at this height Trim the hedge just above this guide line
23. s not cover the damage resulting from modification alteration or unauthorized repair e This warranty only covers defects arising under normal usage and does not cover any malfunction failure or defect resulting from misuse abuse including overloading of the product beyond capacity and exposure to water or rain accidents neglect or lack of proper installation and improper maintenance or storage f This warranty does not cover normal deterioration of the exterior finish including but not limited to scratches dents paint chips or to any corrosion or discoloring by heat abrasive and chemical cleaners 20 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO HOW TO OBTAIN SERVICE For warranty service please contact EGO customer service on 1300 000 EGO 1300 000 346 When requesting warranty service you must present the original dated sales receipt An authorized service center will be selected to repair the product according to the stated warranty terms ADDITIONAL LIMITATIONS Chervon Australia Pty Ltd ABN 36 165 077 501 Chervon warrants to the original domestic purchaser that this product will be free from defects in materials and workmanship for 5 years from date of purchase and any battery or charger will be free from defects in materials and workmanship for 3 years from date of purchase To make a Claim return the faulty item together with proof of purchase directly to your closest service agent or to the plac
24. switch is off when clearing jammed material A moment of inattention while operating the hedge trimmer may result in serious personal injury Carry the hedge trimmer by the handle with the cutter blade stopped When transporting or storing the hedge trimmer always fit the cutting device cover Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades Hold the power tool by insulated gripping surfaces only because the cutter blade may contact hidden wiring Cutter blades contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock 10 56V LITHIUM ION CORDLESS HEDGE TRIMMER HT2400E GO Use both hands when operating the hedge trimmer Using one hand could cause loss of control and result in serious personal injury AX WARNING Check the hedge for foreign objects before operating e g wire fences Only use the hedge trimmer with the guard properly assembled The use of the hedge trimmer without the proper guard may result in serious personal injury IMPORTANT SAFETY INSTRUCTIONS Do not use the battery operated hedge trimmer in rain Do not charge the battery pack in rain or in wet locations Use only with the battery packs and chargers listed below BATTERY CHARGER BA2240E CH5500E BA1120E CH2100E Do not grasp the exposed cutting blades or cutting edges when picking up or holding the hedge trimmer
25. tting area release one of the switch levers to stop the hedge trimmer AX WARNING Always remove the battery pack from the hedge trimmer during work breaks and after finishing work USING THE HEDGE TRIMMER 4k WARNING if the blade jams on any electrical cord or line DO NOT TOUCH THE BLADE IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS Continue to hold the hedge trimmer by the insulated rear handle or lay it down and away from you in a safe manner Disconnect the electrical service to the damaged line or cord before attempting to free the blade from the line or cord Failure to heed this warning will result in serious personal injury or possible death AX WARNING if any parts are missing damaged or broken do not operate your trimmer until they have been replaced Failure to do so could result in possibly serious personal injury 44 WARNING To prevent serious personal injury always use both the front handle and the rear handle to hold the hedge trimmer during operation A WARNING To prevent serious personal injury keep hands away from blades Do not attempt to remove cut material or hold material to be cut when the blades are moving Make sure that the blades have totally stopped and the battery pack is removed before clearing jammed material from blades Do not grasp the exposed cutting blades or cutting edges when picking up or holding the unit AX WARNING Clear the area to be cut before each use Remove all objects such a
Download Pdf Manuals
Related Search