7” Under the Cabinet Multimedia Player
Contents
1. press to stop playback Under the tuner mode press to clear the incorrect input when programming channels 2 PREV Press the button briefly to skip backward Press and hold the button to search fast backward 3 NEXT Press the button briefly to skip forward Press and hold the button to search fast forward 4 PLAY PAUSE Under the DVD mode press to start hold playback Under the tuner mode press to set the band as AM FM 5 MODE Press to shift modes 6 DISC TRAY Hold the disc 7 VFD DISPLAY Display the working information 8 REMOTE SENSER Sense the remote signal 9 EXIT Press to exit the system menu 10 TIME Repeatedly press the button to show the following information Clock gt Week gt Date gt Alarm gt Display Off Please refer to the Basic Operation section for details 11 SET Press to set the clock week date alarm Please refer to the Basic Operation section for details 12 TUNING LEFT DIRECTION Under the tuner mode press briefly to skip backward Press and hold the button to search fast backward It also works as the left direction button while working with the menu 13 CHANNEL UP DIRECTION Under the TV tuner mode press to skip channels It also works as the up direction button while working with the menu Identification of Controls Ei i EE 14 TUNING RIGHT DIRECTION Under the tuner mode press briefly to skip forward Press and hold the button to search fast forward It a2. 9 is used 16 9 When programming files press MENU to access Titles press OK to access Chapters with widescreen television displays 2 To delete the program press OK at the file to be erased Set the player s Video Out signal type Set this To clear all programs press the Clear button on the remote TV System to correspond with your TV s Video System type 3 Press Play Pause to start playback NTSC is the standard used in North America 0016 0023 1 Title1 Chapier1 2 Title1 Chapter2 3 Title1 Chapter3 4 Title1 Chapter4 Angle Mark When the angle mark is set ON an icon will be displayed on the screen if the disc has multiple angle shots available for viewing You also can access this function by pressing the ANGLE button on the remote control The default setting is ON Screen Saver The screen saver prevents burn in damage to the player s screen The default setting is ON 13 14 Audio Setup Item Channel Output Parental Setup Item tem escription Defaut Setting Rating Level Default Reset Description Default Setting Sets the audio channel mix mode LT RT Stereo Description Default Setting The initial password is 8888 Enter the old password the new password and then the new password again to verify Restore function will not reset the password DO NOT FORGET THE PASSWORD this password cannot be reset Sets the maturity rating level of the player The player will not
3. Disc Repeat Title Repeat Track Press the MUTE button to muffle sound Press it again to release Repeat Chapter Repeat Off Repeat Off Memory Zoom E Memory Zoom NOTE Some DVD discs do not allow the REPEAT function oon Under the DVD mode press the button to zoom in out the picture Repeatedly press the button to achieve the following zoom effect Stev Dy 3X 4X 1 2x 1 3x 1 4x Press STEP to start playback frame by frame When playing the JPEG disc press the direction buttons to rotate the picture of normal 100 display Press PLAY to quit the STEP mode or press the direction buttons to move position of the enlarged picture ti ne tite io n e Memory While playing a DVD disc press ANGLE to view different camera angles on the disc Under the tuner mode press the button to program channels A DVD disc may contain up to 9 selectable camera angles tit e While playing a DVD disc press Sub Title to select the language of the viewable subtitle A DVD disc may contain up to 32 selectable subtitles NOTE The picture quality decreases as the picture size increases ear O Press Clear to cancel the incorrect input io Auto FAV While playing a DVD disc press AUDIO to select the language of the audio sound track Auto Press to search stations automatically under the tuner mode A DVD disc may contain up to 8 selectable audio sound tracks Press to show the favorite channel list under the TV mode NOTE Some DVD discs do
4. EXIT to exit Color 1m _ 5o AV UP DOWN lt P ADJUST EXIT EXIT nctionB ttons Pewee Under the DVD mode press the Menu button to show the root menu oto oto Go to a desired section Press GOTO to display the search menu 9 12 J o01 0 02 03 S oft 1 Press the direction buttons to move left right 2 Press the number buttons to input data To cancel the incorrect input press the Clear button 3 Press OK to start searching 4 Press GOTO to quit ite A Under the DVD mode press the Title button to show the title menu irection B tton O While working with the menu press the direction buttons to move the cursor Press OK to confirm CH Press to skip channels under the TV mode TUN Press to tune radio stations under the tuner mode epeat ection B To repeat a specific section eic e a Press A B once to set the starting point A press A B twice to set the ending point B Random Program access It starts playing section A B A 1 To directly access a DVD Chapter or a CD track To cancle press A B again 2 Input data while working with the menu setup or other playback functions NOTE Some DVD discs do not allow the A B function playback This function does not apply to MP3 discs OO Press the REPEAT button repeatedly to select the repeat mode NOTE Some DVD discs do not allow the direct access function epeat DVD Mode CD Mode A Repeat All Repeat
5. Press to the arrow direction and take out the battery holder 2 Place the battery onto the holder with the positive side facing up 3 t in the holder Ei Cable Connections fanaa External AV Source Wall Outlet 100 240V 50 60Hz NOTE 1 Be sure to have all necessary connections properly done before connect the power supply 2 When input the AV signal refer to the manual of the external sources as well TV Antenna Connection Connect TV RF sources to the antenna port TV RF signals include receiving antenna CATV net You can use 75 Ohm coaxial cable to connect the outdoor antenna Tuner Antenna Connection Connect the supplied AM FM antenna to the corresponding antenna slot on the unit s rear panel AV Signal Input RCA Connect the Video port to input the video signal by the yellow plug of the RCA cable Connect the L R port to input the audio signal by the white amp red plug of the RCA cable Power Connection Insert one end of the supplied adaptor into the power jack on the unit rear panel and the other end to the wall outlet with AC100 240V NOTE 1 If the unit will not be used for a long period of time please disconnect the power and remove the battery from the remote 2 Be sure to have all necessary connections properly done before connect the power supply Under Cabinet Mounting Min 2 0 mm Max 25
6. aS TE E ose ped rei E ede eae se aay ere ae tr re 6 pee e PX VJZ OE J MOWUNTIN C n A AEE A ENAA RAE A AT A NEN EA AE A AE E SE 7 ca here a BAGIG OFERON ETETETT T R ETE 8 9 COBY TIME A a E haere eta a AE E E A Mane he A S A T 8 RADIOER EE E E E A E E E E le OMe atone Ane 8 DVD TE IRE AE T E EOE TET E IETA S PEE AE INE EEE A E ENTIE O INE AE A E EE E E 8 Main Unit Remote Control Te eee terrae oe ecto ate eth E E ih iee ma teh aren nae eae h ANA EN a Gane einen eee 9 A ET eater E A EE E ee E A E E a er A E 9 FUNCTION BUTTONS BUTTONS ON THE REMOTE csssssssssssssssssssssssssssssssssssssssessssssssssssesssssssssssssnneesses 10 13 DVD SETUP sasen E E e a R 14 15 TIN EEEE AAE A E E ANAE A E 16 17 TROUBLE SHOOTING crests case acetate nett E a a E N eae 18 SPECIFICATION exceeds na aE ae Sease E Ea SA E 19 20 Mounting kit Template x1 RCA Cable Screw x 4 Note on Disc l Disc Requirements The DVD player can play back the following discs P Disc mark Contents Maximum playback time 133 min SS SL DVD video DVD Audio Video 242 min SS DL discs lt a gt moving picture 266 min DS SL 484 min DS DL Audio CDs COMPACT Audio 74min DIGITAL AUDIO In addition this unit can play back a CD R or CD RW that contains audio titles or MP3 files You cannot play discs other than those listed above CD ROM CD Extra CD G and CD I discs can not be played on this DVD player Video disc contains hi
7. ar Press the button to skip advance the DVD chapter or the CD track t Press the button to skip backward the DVD chapter or the CD track O Player will not skip forward or backward during WARNING section of a DVD disc Single chapter DVD or single track CD cannot be skipped ast or ar Bac ar gt Press the button to search fast forward through the disc Repeatedly press the button to increase the search speed Play gt x2 gt x4 px8 gt x16 x32 a Press the button to search fast backward through the disc Repeatedly press the button to increase the search speed Press PLAY to resume the normal playback NOTE The player is muted in the fast forward or fast backward mode The player will not fast forward or fast backward during the WARNING section of a DVD disc o A Press the SLOW button to start the slow motion playback Repeatedly pressing the button will decrease the slow speed Play py 2 gt x1 4 x1 8 gt x1 16 1 32 NOTE The player is muted at the SLOW mode Standby tan Press the Standby button to access exit the standby mode TV Setup TV Setup Under the TV mode press to show the TV menu Under the AV DVD mode press to show the TFT setup menu SETUP Picture Mode lt 4 Standard gt Contact aap Press the up down direction button to select the item Brightness lt 50 gt Press the left right direction button to adjust Sharpness 1 5 Tint 1 50 gt Press
8. fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped A A 15 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions 16 Protective Attachment Plug The product is equipped with an attachment plug having overload protection This is a safety feature See instruction manual for replacement or resetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified WARNING by the manufacturer that has the same overload protection as the original plug CAUTION 17 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be CAUTION sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANS NFPA 70 provides information with regard to proper grounding conductors location or antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode 18 Power lines An outside antenna system should not be located in the vicinity of overhead power li
9. not have multiple ANGLES SUBTITLES or AUDIO features AM FM EPG FW AM Press to select band under the tuner mode Press to show the electronic program guide under the TV mode stds Ae l nction B ttons ag ST Mono DVD Setup ST Mono Switch between the stereo audio mode and the mono audio mode when there is stereo audio rious features atthe DVD playercan be adilsted inthe SETUP meni signal detected i CHLList 1 Press SETUP to show the setup menu 2 Press direction buttons to select the options CH List Press to display the channel list under the TV mode 3 Press OK to confirm settings Language SETUP a Setup Press the SETUP button to enter the DVD setup menu g The SETUP menu allows the viewer to adjust the setting details of the DVD player ie Please refer to DVD SETUP section for further directions A ER Program Function O Press the Program button to access the Program function O Language Setup OSD Language Set the OSD On Screen Display language English Subtitle Set the subtitle language English 5 Title1 Chapter5 Set the audio language English 6 Title1 Chapter6 7 Title1 Chapter7 Menu Set the menu language English Exit Select Play Display Setup 1 Press the up down direction button to select the desired file Set the aspect ratio of the display 4 3 is used and press OK to save The chosen file will be displayed to the right screen Aspect Ratio with standard television displays 16
10. play any discs rated higher than this setting There are eight rating levels Level 1 will restrict playback to discs suitable for people of all ages Level 8 will allow playback of all discs including those suitable for adults only Please follow the below steps to change the paretal level Enter Rating Level gt Press the left right button to set the level gt Press ENTER to confirm gt Your are required to input the password to enable the new setting Reset the player to the factory default 15 I TV Function TV Function Preparations 1 Connect the antenna and the power supply Press POWER to turn on the the player See Cable Connections section 2 Press MODE to select TV 3 Press the CH button to skip channels or press numeric buttons to input the channel directly For the initial use scan channels under the Channel Setup menu See the Channel Setup section for details Setup Menu Various features can be preset through the TV setup menu TV setup menu consists of Picture Setup Audio Setup Time Setup Option Setup as well as Channel Setup 1 Press TV SETUP to display the menu 2 Press the left right button to select the menu press OK to enter the menu While working with the menu 1 Press the up down direction button to select the item 2 Press the left right direction button to adjust 3 Press TV Setup to back up the menu Press EXIT to exit th
11. 0 mm Choose an appropriate mounting location underneath a cabinet or shelf Choose an appropritate mounting location underneath a cabinet or shelf Close proximity to an electrical outlet a TV antenna or cable connection and a telephone jack will facilitate a neat easy installation Do not mount the product above a range or oven Be sure that the location chosen will provide adequate access to the electrical connection on the rear of the unit before continuing Under cabinet Mounting 1 Upon opening the final package you will find a position reference template that tells the standard position you have to drive through when mounting Tape the template in place onto the cabinet surface and drill four screw holes accordingly through the cabinet base 2 Position the product and mount it in place using the supplied screws Do not over tighten 3 Connect the cables Route the wires safely away from the heat and moisture sources and secure them in place NOTE 1 The template is just for the position reference when mounting please don t affix it to the mounting surface 2 To ensure the product safety it is recommended that the minimum thickness of your cabinet base should be 2 0 mm and the maximum thinckness should be 25 0 mm 3 Take care when installing it It may cause damage or serious injury should it fall from its mountings Time Button Repeatedly press the TIME button on the main unit to display the following infor
12. NOT OPEN AVIS RISOUE DE CHOC ELECTRIQUE NE PAS OUVRIR A The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture Dangerous high voltage is present inside the enclosure Do not open the cabinet To prevent electric shock match wide blade plug to wide slot and fully insert This Digital Video Disc Player employs a laser System To prevent direct exposure to the laser beam do not try to open the enclosure When open and the interlocks are defeated visible laser radiation is present Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure DO NOT STARE INTO BEAM This equipment has been tested and found to comply with the limits for a Class B digital device Pursuant with the FCC Rules Part 15 These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can rad
13. Thanks for shopping with Improvements A 7 Under the Cabinet Multimedia Player Item 431377 r C O OREP Exception A product that is meant for uninterrupted service and that for some specific reason such as LLL BY Hea the possibility of the loss of an authorization code for a CATV converter is not intended to be unplugged Widescreen Kichen LCD ATSC NTSC TV with by the user for cleaning or any other purpose may exclude the reference to unplugging the product in the DVD Player and AM TM Tuner cleaning description otherwise required in 131 8 5 7 Do not block any ventilation openings Install in accordance with the manufacturer s instruction Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a thi
14. ctivated 5 There will be no sound output during REVERSE PLAY PAUSE SLOW and SEARCH 1 Make sure the unit is turned on 2 Remove the obstacles between the remote control and the player 3 Point the remote control towards the remote sensor on the player 4 Check if the batteries of the remote control have been loaded with correct polarities 5 Replace the batteries of the remote control Should the player develop a malfunction unplug the player for 30 minutes After that power on the player and the restore function should reset the player Handling the coated electrical wires of this product exposes you to lead a chemical known to the State of California to cause cancer birth defects and other reproductive harm Wash hands after use 18 iL Specification 1093 Specification AC input 100 240V 50 60Hz On working 24W Max Speaker 2x 8Q 3 0W Operating temperature range 10 c 40 c Weight 22359 Channel Coverage 55 25 160 00MHz 160 00 442 00MHz 442 00 801 25MHZ Power consumption Antenna Impedance 25 Ohm unbalance Tuning System FS with PLL TFT Panel Characteristic 222 0 W x132 48 H Size Pixel Pitch mm 0 2775 W x0 276 H C Fesouton amen DTV Characteristic DTV System ATSC QAM Channel Received VHF L ch 2 to B 57 129MHz VHF H ch C to KK 135 363 MHz UHF ch LL to 69 369 803 MHz Design specifications and manual are subject to change without prior notice 7093 Specificat
15. e menu Picture Setup Sharpness Adjust the display color Audio Setup Balance Audio Language Setup the audio language 16 J TV Function Time Setup ITEM DESCRIPTION Time Zone Select the time zone Central Mountain Pacific Alaska Hawaii Atlantic Eastern Daylight Saving Set the time saving function on off Time Option Setup ITEM DESCRIPTION Menu Language Setup the menu language Color Mode Setup the color mode Normal Warm Cool Adjust the display mode Normal 4 3 Restore Default Restore settings to the factory default Channel Setup ITEM Antenna Auto Scan Show Hide Favorite Channel No Channel Label DESCRIPTION Setup the antenna type as Air or CATV Search channels automatically Press the right direction button to start searching press EXIT to quit Skip the unwanted channels Press the up down direction button to select the channel press OK to set block Press OK again to release Make the favorite channels collection Press the up down direction button to select the channel press OK to set it as the favorite channel Press OK again to release Edit the channel label 1 Select Channel No press the left right direction button to set the channel 2 Select Channel Label press the right direction button to show the edit menu In the menu press the left right direction button to move left right Press the up down di
16. gh density compressed data that needs proper handling Hold the disc with fingers Hold the disc s outer edge and or the center spindle hole Do not touch the disc surface Store discs in cabinet vertically and in dry condition Prevent exposure to a Direct sunlight Heat or exhaust from a heating device Extreme humidity Clean the disc surface with a soft dry cleaning cloth Wipe the disc surface gently and radically from center toward the outer edge Do not apply thinner alcohol chemical solvent or sprays when cleaning Such cleaning fluids will permanently damage the disc surface ERG SWIVEL PANEL Connectors on the unit s rear panel VIDEO IN Pivot the screen forward until a comfortable viewing angle is reached The screen may also be rotated from side to side do not force the screen beyond its rotational limit When the screen will not be used just fold up with the LCD side facing inward 1 STOP 2 SKIP BACKWARD 3 SKIP FORWARD 4 PLAY PAUSE 5 MODE 6 DISC TRAY 7 LCD DISPLAY 11 SET 12 TUNING LEFT DIRECTION 13 CHANNEL UP DIRECTION 14 TUNING RIGHT DIRECTION 15 TV SETUP 16 CHANNEL DOWN DIRECTION 17 VOL 8 REMOTE SENSER 18 VOL 9 EXIT 10 TIME 19 OPEN CLOSE 20 POWER 21 SWIVEL PANEL 22 FM ANTENNA JACK 23 AM ANTENNA JACK 24 AUDIO L 25 AUDIO R 26 VIDEO IN 27 POWER JACK 28 TV ANTENNA JACK 29 OK 1 STOP Under the DVD mode
17. iate radio frequency energy and if not installed and used in accordance with the instruction may cause harmful interference to radio communication This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Note 1 The batteries should not be exposed to excessive heat such as sunshine fire or the like 2 The mains plug or an appliance coupler was used as the disconect device the disconnect device shall remain readily operable and should not be obstructed during intended use Please make sure the following items are included with your DVD player If any items are missing contact your dealer IMPORTANT SAFETY INSTRUCTIONS Page oy Dep SAFETY INFORMATION O TABLE OF CONTENTS 5O S ee 6 eae meee mre eee ny nnn A eee arene ey 1 Gwe N O COTE ON DSC A N A E E E 2 O LF Z IDENTIFICATION OF CONTROLS nnns 3 5 O BUTTONS ON THE MAIN UNIT sssssssssccosssscesansssssvscocsssusssassstndsvsndbnassnssusoncavsssshsssanedsbenessusnsiusniecanadenssdsntanedlbsopassn 3 REMOTE nein E E OE E E E T a a a trance 5 CABE CONNECTION S
18. ion AC input 100 240V 50 60Hz On working 24W Max Speaker 2x 8 2 3 0 W Operating temperature range 10 c 40 c Weight 2006 g Channel Coverage 55 25 160 00MHz Power consumption 160 00 442 00MHz 442 00 801 25MHZ Antenna Impedance 25 Ohm unbalance Tuning System FS with PLL TFT Panel Characteristic 222 0 W x132 48 H Pixel Pitch mm 0 2775 W x0 276 H Rescuon 480RGBKSAH DTV Characteristic DTV System ATSC QAM Channel Received VHF L ch 2 to B 57 129MHz VHF H ch C to KK 135 363 MHz UHF ch LL to 69 369 803 MHz Design specifications and manual are subject to change without prior notice P N 907 KD10 9302 00R
19. lso works as the right direction button while working with the menu 15 TV SETUP Press to display the menu 16 CHANNEL DOWN DIRECTION Under the TV tuner mode press to skip channels It also works as the down direction button while working with the menu 17 VOL Press to adjust the volume up 18 VOL Press to adjust the volume down 19 OPEN CLOSE Press to open close the disc tray 20 POWER Press to turn the power on off SWIVEL PANEL Present the high resolution picture The panel can be turned by 270 degrees for the different viewing positions When the panel will not be used just fold up with the LCD side facing inward 22 FM ANTENNA JACK FM antenna connector 23 AM ANTENNA JACK AM antenna connector 24 AUDIO L Audio signal input L 25 AUDIO R Audio signal input R 26 VIDEO IN Video signal input 27 POWER JACK Connect with the power source 28 TV ANTENNA JACK TV antenna connector 29 OK Press to confirm settings It also works as the memory button under the tuner mode 2 Identification of Controls R DISPLAY sen PROGRAM STANDBY MODE TITLE KEY PAD AUDIO Subtitle i 2 a Eo PBI SUBTITLE CeHOHe PBC SETUP apeje a TV SETUP 4 C ANGLE EXIT DIRECTION REPEAT JOK TUN CH MENU AB F FWD MUTE F BWD NEXT PREV STEP PLAY PAUSE TOW CLEAR VOL ZOOM MEMORY VOL EPG FM AM CH LIST AUTO FAV ST MONO RC 028 Remote Control Drawing Using The Coin Lithium Batter lt 4 1
20. mation Clock gt Week gt Date gt Alarm gt Display Off Time button functions under any living modes Set Clock Press TIME to display the clock press SET to access the active time interface While setting the clock press the left right button to move left right press the up down button to adjust press OK to confirm Set Date Week Alarm Repeatedly press TIME on the main unit to display Date Week Alarm press SET to access the active setting interface While setting Date Week Alarm press the left right direction button to move left right press the up down direction butto to adjust Press OK to confirm Radio Operation Basic Operation 1 Connect the AM or FM attenna and the power source Refer to the Cable Connections section for details 2 Press MODE to select the tuner mode Press the FM AM button to set band 3 Press TUN briefly to skip forward or backward Press and hold TUN to search through the entire band and it will stop at the captured channel or you can briefly press the TUN button to stop searching 4 Press CH to listen to the preset channel There is no channel preset in the memory location upon the initial use Refer to Program Channels section below for how to program channels Program Channels Manual Program 1 Locate the program you want to save by the TUN button 2 Press the Memory button on the remote or the OK button on the main unit to save 3 Press the OK butt
21. nes FCC NOTICE or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 19 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as notice this can result in a risk of fire or electric shock 20 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 21 Servicing Do no attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 22 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric or other hazards 23 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 1Safety Precautions 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A WARNING SHOCK HAZARD DO
22. on to confirm The saved program will be assigned a channel number automatically by the system 4 To delete the channel press CH to locate the channel you want to erase press the Clear button on the remote or the STOP button on the main unit to erase Press OK to confrim Auto Program Press Auto on the remote to start auto program The captured channels will be saved automatically into the memory location overwriting the previous one DVD Operation 1 Connect the power source Press MODE to set the player into the DVD mode 2 Press Open Close to open the disc room Place a disc onto the holder with the label side facing up close the disc room 3 Press PLAY PAUSE to start playing Press STOP to stop Press VOL to adjust the volume Usually a DVD disc contains a root menu The root menu appears once the data is recognized by the player Press the direction buttons to select a file in the root menu press PLAY PAUSE to start playing Some discs are recorded without the root menu and start playing automatically 4 Adjust the screen effect through the TFT menu Press TV SETUP to display the TFT menu NOTE 1 The player supports discs as follow DVD CDR MP3 JPEG 2 More DVD functions are listed clearly under the Function Button section and the DVD Setup section please read carefully Ein TV Operation 1 Connect the cables Press POWER to turn on the player Refer to the Cable Connections section for de
23. rd grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet KTF DVD 1093 KTF DVD 7093 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles CAUTION Use of controls or adjustments or performance of procedures other than those specified and the point where they exit from the apparatus Power supply cords should be routed so that they are not DONDONG ONA likely to be walked on or pinched by items placed upon or against them paying particular attention to cords Please carefully study this manual and always keep it available There are however some installation and tpl ticis EREE A the Eti uit operation precautions which you should be aware of ER ee ee ae a See ene eee 1 Read these instructions All the safety and operating instructions should be read before the product is 11 Only use attachments accessories specified by the manufacturer Do not use attachments not recommended by the product manufacturer as they may cause hazards operated 2 Keep these instructions The safety and operating instructions should be retained for future reference ape 12 Use only the cart stand tripod bracket or table specified by the manufacturer or sold with the appa 3 Heed all wamings All wamings on the product and in the operating instruction
24. rection button to make changes 3 To clear the label repeatedly press the up down direction button to display the blank input AT 3 Should your DVD player develop a problem please check below before requesting service Symptom No power Does not play No Picture Picture noisy distorted No sound or sound output not complete Remote control does not work Malfunction PROP 65 WARNING Check and Action 1 Make sure the unit has been powered on manually 2 Check if the power cord has been properly connected to the power outlet 3 Make sure the battery pack is fully charged 1 No disc load a disc 2 Disc has been loaded upside down Place the disc with the label side up 3 Disc s rating level is higher than the player s setting 4 Disc is incorrect type for the player 5 Disc is damaged or dirty Clean the disc or try another one 6 Moisture may be condensed inside the player Remove the disc and leave the unit power on for one or two hours 1 Check if the system connection is proper and secure 2 Check if the connection cables are damaged 3 Clean the disc 1 Disc is damaged or dirty Clean the disc or try another one 2 Reset the color system 1 Check if the player has been switched on and correctly set 2 Check if the system connections are secured 3 Press AUDIO button to select other audio tracks of the disc 4 Check if the MUTE function of the TV or amplifier has been a
25. s should be adhered to j i onki aes ratus When a cart is used use caution when moving the cart apparatus combination to avoid injury from 4 Follow all instructions All operating and use instructions should be followed 5 Do not use this apparatus near water The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus tip over 6 Clean only with dry cloth Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Clean only with dry cloth IM PROVEM ENTS If you have any questions regarding this product call ImprovementsCatalog com 1 800 642 2112 and ask for our product specialists To order call Mon Fri 9 00 5 00 EST 1 800 642 2112 0313 West Chester OH 45069 or e mail productspecialist improvementscatalog com See many more products on the Internet www ImprovementsCatalog com 21 mportant Safety Instruction E 13 Unplug this apparatus during lightning storms or when unused for long periods of time Unplug it from Continued the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have
26. tails 2 Press MODE to set the unit into the TV mode 3 Press CH to skip channels Press VOL to adjust the volume For the initial use please scan channels under the Channel Setup menu Refer to Channel Setup of the TV Function section for details 4 Various TV features are preset through the TV setup menu Press TV SETUP to show the TV setup menu Please read the TV Function section carefully AV Operation The player has the AV input function You can enjoy programs from the external sources 1 Connect the AV cable and the power supply See Cable Connections section 2 Set the player into the AV mode by the MODE button 3 Adjust the screen effect through the TFT setting menu Press TVSETUP to display the TFT menu NOTE When input the AV signal please see the user manual of the external AV signal source as well Be sure to have all necessary connections properly done before connecting the power nctionB ttons Pa Function Buttons on the Remote ispa ipa Press the Display button to show the time and status information Repeatedly press the Display button to quit the display mode a ase mi Press the Play Pause button to start hold playback top a Press STOP once to stop playback by a time point Press the PLAY button to resume playback from where it was stopped Press STOP twice to completely stop the disc Press the PLAY button to start playback from the beginning ip or ar Bac
Download Pdf Manuals
Related Search