LSW-046A - Vari-Lite
Contents
1. 9 08 is installed To change Lamp Level settings CONFIG gt LAMP LAMP gt LEVEL FULL Enter Note Any further software updates will retain the settings as they are in 10 9 08 However if you revert to a previous version this setting will change and need to be reset If you have any questions regarding this release or your VARI LITE product please contact Vari Lite Customer Service at 1 877 VARILITE or 1 214 647 7880 or via e mail at entertainment service philips com 03 APRIL 2012 BULLETIN No LSW 046A2. PHILIPS VARK LIT E tectnicat BULLETIN SUBJECT VL3000 Luminaire Software Update SERIES 3000 DISTRIBUTION Service Centers End Users STATUS Routine Introduction Note This bulletin is revised to include some additional information as outlined in Additional Information for LSW 046A on page 2 of this bulletin regarding the use of this software The software itself nor the features described in the original release of this bulletin has changed Also the instructions on downloading and using the USB Luminaire Programming Kit has been added to this document Embedded Software Update Software update 10 09 08 for VL3000 Luminaires is now available This technical bulletin covers all changes in this new version For instructions on downloading and installing VARI LITE luminaire software refer to luminaire s user manual For more information on the USB Luminaire Programming Kit Vari Lite part number 28 8500 0054 please contact your Authorized VARI K LITE Dealer or Vari Lite customer service If you have any questions regarding this release or your VARI LITE product please contact Vari Lite Customer Service at 1 877 VARILITE or 1 214 647 7880 or via e mail at entertainment service philips com Release Notes Improvements in New Version VL3000 Spot and VL3000 Wash Luminaires e Improved cross loading software capability e This version allows luminaire to luminaire cross loading of software from new
3. er luminaire Main Control Boards MCBs to older MCBs 03 APRIL 2012 BULLETIN No LSW 046A PHILIPS oes VARIZELITE technica BULLETIN Additional Information for LSW 046A This version of software changes the storage location of certain information on the Main Control Board MCB After you install this software version you will need to check and reset if necessary the following items Fixture Power Setting This power level setting determines the amount of current available to the pan and tilt motors Fixtures with the original LVS Marked as either APS or Reign Power should be operated in Model A the lower power setting Luminaires with the current Lambda supply should operate in Model B See Technical Bulletin LSW 028 for further details Installing 10 9 08 will always set to Model A If you wish to be in Model B FIXTURE gt POWER gt MODEL B Enter Lamp Level Command Lock This feature enables or prevents lamp level changes from the console This will always change to OFF when you install 10 9 08 If you wish to have Lamp Level Command Lock ON CONFIG gt LAMP CMD gt LOCK ON Enter Note Refer to Technical Bulletin LSW 042 for information on this feature Lamp Level Lamp Level allows the user to operate the luminaire in FULL or STANDBY Mode see LSW 042 for information on this feature If the fixture power was set to Model A in the previous version the lamp level will always change to STANDBY when 10
Download Pdf Manuals
Related Search