manual - AB Lights
Contents
1. 55 30 0 8 O BE Manual o oO Page 4 6 Zoom mode J Horizontal tension 8 Perpendicular drawing 9 rotating 10 Display mode 12 color Control mode 189 209 210 255 0 10 11 109 110 154 155 204 205 255 1 150 151 255 1 150 151 255 1 180 181 217 218 255 0 63 64 127 128 191 192 255 0 10 11 200 201 255 White red green blue yellow purple 00 251 Cyan Stimulation modulation color gt Subsection RGB gt Subsection PCY gt S each five value one Ubsection RGPYBCW color 47 Counterchange RGB color Counterchange PCY gt optional Counterchange WRGBPYC analogue modulation color segmentation flow Sound control Auto control DMX Follow Mode Compatible with PC software 1 Red and Blue can work in analogue modulation 34 kinds of color can realize 47 changing colors in DMX mode 2 Fantastic animation beam effect Page 52. a y LASER DISPLAY SYSTEM MANUAL Please read the manual carefully before using BIG DIPPER LASER SCIENCE amp TECHNOLOGY CO LTD REV 3 02 Laser light after service Product warranty card Please fill in the following content properly and keep it safe for future maintenance Accordingly for your each purchase of our systems we have archive Serial number and parameters for future reference Testing Warranty Mode Serial No Distributor Address Tel About Product Warranty 1 Where in my company and an authorized agent to buy the proper use of laser devices in the case of products that enable card are entitled to light a period of mechanical electronic one year warranty if not the warranty situation the company can also according to actual situation provide paid maintenance services 2 The warranty Is no longer valid in the following situations Warranty cards and products have no serial numbers Product is damaged or show significant signs of self disassembly Any unauthorized modification removal or replacement made to product or it s components Improper or excessive use of inappropriate repairs which result in a repair failure or injury Did not follow instructions or use In an environment not suitable for product Product damage caused by strong impact The warranty cannot be extended if the product as been serviced Laser power normal degradation Warranty card must b
3. e filled out with receipt of purchasing in order for the warranty to be valid Product is damaged due to abnormal voltage or caused by other accidents ex Natural disasters 3 The Company reserves the right to interpret the provisions above e The content of these articles is subject to change without notice Laser Display System Manual Model B10000 RGB Notices 1 This is IV laser product Do not exposure the human eye directly to the laser light 2 Please follow the instructions Do not disassemble this product Please contact the professional person if there is a malfunction 3 Installation should be done by a professional technician 4 Please place the product far away from strobe lights 5 The product should be placed in a dry place Do not use the product in a wet or dusty environment Water proof fittings required if it is used outdoor 6 Do not touch the product or pull the power wire by wet hand 7 The work temperature of laser product is 10 40 C The product will not work normally in a low temperature environment 8 Do not turn on or off the product frequently Otherwise the service time of lasers will be affected Besides keeping working for a long time should be avoided 9 Fixed installation to prevent the product from strong vibration or shock 10 Prevent foreign objects from entering the product to avoid malfunction 11 Keep the distance between the product and the objects in the lighting 1M a
4. hould be fixed firmly 5 For security reasons the appliance must be earthed 6 Laser light above MPE should not be accessible to audience MPE can t be exceed in the separation distance see the illustration Instruction of using interlock wire The machine will work only if plugging in the Interlock wire with Short circuit It will delay 5 15 seconds to light out Page 2 Attention When in Follow Mode either can be chosen for the Host In asynchronous situation the Follow one will run after the Host automatically to reach synchrony Maintenance Clean the lens regularly Do not use a wet cloth or chemicals but a cotton swab with alcohol to clean the lens The maintenance frequency depends on the usage frequency and surrounding working conditions of the product Clearance per 15 days is recommended Besides dust cover at the product side should be dismantled to clear regularly because the heat radiation effect will be affected by the dust for the long time use Warning Power off before installation or maintenance Declare The product is with good performance and complete package when it is delivered The end user of this product should follow all the above instructions and warnings Any damage caused by misuse malfunction and problem caused by ignoring the instructions are not included in the repair guarantees of the manufacturer or dealers All products made from Big Dipper Laser Company have anti fake identification p
5. ip Switch 3 4 are set to OFF Auto speed Dip Switch 3 is set to ON Dip Switch 4 to OFF Slow speed Dip Switch 3 Is set to OFF Dip Switch 4 to ON Fast speed Dip Switch 3 4 are set to ON Fast speed 4 when in Follow Mode Dip Switch 2 is ON Follow Mode Page 6 3 metre Height MPE must not be exceeded Side view showing the 3m vertical separation distance Public Access Balcony etc 2 5 metre Horizontal MPE must not be exceeded LASER i BEAMS MPE must not be exceeded 2 5 metre Horizontal j Public Access Balcony etc Side view showing the 3m vertical separation distance Diagram illustration RearPanel Function setting ILDA IN ILDA Input ILDA OUT ILDA Output INTERLOCK Remote control connection 4 MIN MAX Sound Sensitivity adjustment Microphone Sound signal IN Indicator light on under sound mode IN DMX signal input OUT DMX signal output Q DMX ADDRESS Binary format switch POWER ON OFF Power Switch 11 F3AL 250V Three core socket communication Technical parameters Laser diode R G B Laser power R 300mW B 500mW G 200mW Power Requirement 100 240VAC 50 60HZ Scan angle 15 DMX Channels 12 Channels DMX512 Control Channel Settings Channels DR Operating Mode numerical 1 64 127 Auto Sound Mode Auto mode O Z OoOo oS O PLAY MODE 128 191 Auto mode pe 2 Pattern 3 strobe 0 255 8 levels adjustment 0 2
6. lease verify the anti counterfeit label at the bottom of the case to ensure the interests of consumers Page 7 3 1t can work synchronously under the control of computer stander ITDA interface and work in DMX sound and auto mode without computer 4 Slow lighting from start The speed of scanner is 15KPPS Can show animation with blanking patterns can be zoomed in or zoomed out synchronously or Display asynchronously in vertical or horizontal orientation the effect Same motion is effected on the offset rotation wave dot line strobe and so on Dimensions 330x370x125mm NW GW 5 6 7 1KG Warning In any installation and maintenance work please make sure the system is powered off Remark DMX512 mode the LASER display system will shut off if the DMX512 signal intermit Under the sound mode the LASER display system will be closed when quiet ADDRESS DMX address setup Address 1 10 Dip switch 1 When Dip Switch 10 is set to On the function of Dip code 1 9 as follows Dip Switch 1 is OFF Sound Mode Master LASER Dip Switch 1 is ON Auto Mode Master LASER Dip Switch 2 is ON Follow Mode Attention When in Follow Mode either can be chosen for the Host In asynchronous situation the Follow one will run after the Host automatically to reach synchrony 2 When Dip Switch 10 is set to OFF the system can be controlled by 12 channels DMX512 3 Speed adjustment Under sound Mode D
7. t least 12 Do not connect the power cable or turn on the light before installation 13 Make sure the plug has been wired up properly before being powered on 13 Make sure the plug has been wired up properly before being powered on 14 After running constantly for three hours turn off the product for 25 minutes at least for cooling to reuse Page l 15 Turn on the product before opening the laser show control software Otherwise the laser show control software need to be reopened 16 Use the original shake proof packing for re transportation 17 mm This symbol indicates separate collection of electronics and electronic equipment Inspection In order to use the product securely and properly please read the manual before using and follow the instructions strictly to prevent personal safety trouble and product damage caused by misuse Take care of the product check the possibility of the product damage caused by transportation and check all the listed Items are present upon receipt of the product 1 x LASER display system 1 x User manual 1 x DMX cable 1 x Power cable 1 x DB25 link optional 1 x Interlock wire Installation 1 Make sure there is no flammable or explosive subjects within min 1 5 meter nearby the installation 2 Before installation please check and make sure the power supply voltage meet request of the system 3 Please check ventilation and fans or exhaust passages are cleared 4 The equipment s
Download Pdf Manuals
Related Search