ReadyDATA OS 1.2 Desktop Storage Systems Installation
Contents
1. It takes about a minute to start up The IP address is retrieved using DHCP Install and run the RAIDar utility on a computer that is connected the same local area network LAN as your ReadyDATA system RAIDar is on the resource CD that came with your system It includes versions for Windows Mac and Linux operating systems RAIDar detects and displays the ReadyDATA system or systems on your network Select your ReadyDATA system from the list of detected devices and click the Setup button An SSL certificate security warning displays This warning ensures an encrypted authentication and secure access to the local admin page for your storage system Accept the certificate A login prompt displays Enter admin for the user name enter password for the password and click the OK button Both the user name and password are case sensitive Tip You can change these credentials when you configure your system NETGEAR recommends that you change your password as soon as possible The ReadyDATA local admin page displays in your browser For information about configuring managing and maintaining your ReadyDATA system see the software manual for your system2. Support After installing your device locate the serial number on the label of your product and use it to register your product at https my netgear com You must register your product before you can use NETGEAR telephone support NETGEAR recommends registering your product through the NETGEAR website For product updates and web support visit http support netgear com NETGEAR recommends that you use only the official NETGEAR support resources For the current EU Declaration of Conformity visit http support netgear com app answers detail a_id 11621 NETGEAR Inc 350 East Plumeria Drive San Jose CA 95134 USA NETGEAR the NETGEAR logo and Connect with Innovation are trademarks and or registered trademarks of NETGEAR Inc and or its subsidiaries in the United States and or other countries Information is subject to change without notice Other brand and product names are registered trademarks or trademarks of their respective holders NETGEAR Inc All rights reserved March 2013 MCT 201 1 7055 03 For indoor use only Valid for sale in all EU member states EFTA states and Switzerland NETGEAR Connect with Innovation ReadyDATA OS 1 3 Desktop Storage Systems Installation Guide Package Contents Thank you for purchasing this NETGEAR product You need the following items from your package to set up your ReadyDATA system 1 ReadyDATA system 2 Resource CD 3 Power cord varies by model 4 E
3. thernet cable For more information about setting up configuring and using your system see the appropriate software and hardware manuals Links to these manuals are included on the resource CD that came with your system and are also available at http downloadcenter netgear com or through a link in the product s user interface IMPORTANT Read all safety warnings in the hardware manual for your system before connecting the system to the power supply Basic Setup Follow these instructions to begin using your ReadyDATA system These instructions assume that at least one disk is installed in the system Note If you have a diskless system you must install at least one disk before following these instructions For information about installing disks see the hardware manual for your system To set up your storage system 1 Place your system in a location that provides adequate ventilation High capacity disks can produce considerable heat It is important to ensure that the fan exhausts are unobstructed For a complete list of placement considerations see the hardware manual for your system Connect the power cord to the back of the system and plug the other end into a wall outlet or power strip Make sure that the power switch on the back panel is in the ON position Use an Ethernet cable to connect an Ethernet port on the storage system to your network If necessary press the Power button to turn on the system
Download Pdf Manuals
Related Search