User manual
Contents
1. Caps LAT TICIN 2 Blender Level mark Support base 0 Ga eines switch amp light Power cable O Spare blender D Foam blender Hot milk blender English Version Technical Specifications Model Latticino Electricity Range 230V 240V 50 Hz Power 600W 650W Heating element flat heating disc Capacity 100 250 ml cold milk Main wire 0 75 meters Size 158 126 164 mm Safety Warnings e After having the packaging removed check that the appliance is intact If in doubt do not use the appliance and contact your sal2. Pour milk into the pot at a maximum of 250 ml which is the level marked with Max If more milk is poured into the pot you risk an overflow of warm milk English Version Fig 10 Pour the chocolate into the pot Fig 11 Close the lid of the appliance Fig 12 Put the pot onto the support base Check that the electrical plug is inserted into the mains socket Fig 13 On the support base the mid signtp is the heating switch When you firstly start the appliance the indicator light will be on and the blender start to rotate the milk In about 90 240 seconds the appliance will stop automatically and the light will be off The pot is now filled with hot chocolate that can be poured in your cup When you need to stop the appliance to work on halfway you can repeat to press the switch and it will stop immediately When you need to speed up to work the appliance please wet the bottom of the pot with little tap water See the Fig English Version Cleaning amp Maintenance Fig 14 You can take out the blender and wash it under tap water Fig 15 You can pour the tap water into the pot to clean it Fig 16 Do NOT put the support base of the heater into water English Version Fig 17 The support base of the heater can NOT be washed in water nor rinsed under tap water Fig 18 You can use the spare blender under the support base if you need it Problem Solving e When the switchtb is twinkling that means th
3. e thermostat system of the appliance was been malfunction At this time you should cut off the electricity power and informed CAFECAPS service dealer e When the ON switch is pressed down there is no light and it fails to work If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly gualified persons in order to avoid a hazard Check the power input Itis connected to the main socket in the wall and that there is electricity If it still fails to work Contact a gualified service dealer e The milk is not becoming foam Check that the blender is correctly placed on the centre shaft Check that the blender is not broken Check that the blender is not jammed by other things or old clogged residues New blenders are available as a spare part LAT TICINO Cafecaps Ltd 105 Sukhumvit Soi 57 Klongton Nua Wattana Bangkok 10110 Thailand 66 2 392 1978
4. es agent e The parts of the packaging plastic bags etc must not be left within the reach of children as they are potential sources of danger e This appliance has been manufactured to make milk foam and chocolate only e This appliance is designed for and must only be used for house hold purposes All other use is considered improper and as a result dangerous and voids the warranty e The manufacturer declines all liability for any damage deriving from improper incorrect and unreasonable use of the appliance In the event of faults or malfunctioning of the appliance do not tamper with it For any repairs only contact service centers that are authorized by the manufacturer Failure to observe the above warnings may compromise the safety of the appliance e The appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction e Children should be supervised to ensure that they do not play with the appliance e Keep out of reach from children when in use the milk is very hot e During cleaning never immerse the support base in water this is an electrical appliance e When using the appliance do not touch the hot surface of pot and heating element English Version AAA AE Important e When using the appliance please prepare everything first cleaning the pot filling with m
5. ilk before placing it on the base station e Ifthe appliance has already heated up allow it to cool down completely before using it e Please keep the heating disc clean Don t leave anything on the surface of heating element and the bottom of the pot Operation Milk Foam Fig 1 Open the lid of the appliance Fig 2 Press the blender into the pot Fig 3 Pour milk into the pot at a maximum of 250 ml which is the level marked with Max If more milk is poured into the pot you risk an overflow of warm milk Fig 4 Close the lid of the appliance Fig 5 Put the pot onto the support base Check that the electrical plug is inserted into the mains socket Jj English Version jk A A AAA AAA nn Fig 6 On the support base the left sign is the heating switch and the right sign is the non heating switch When you firstly start the appliance the indicator light will be on and the blender start to rotate the milk In about 90 240 seconds the appliance will stop automatically and the light will be off The pot is now filled with hot luscious milk foam that can be poured in your coffee cup When you need to stop the appliance to work on halfway you can repeat to press the switch and it will stop immediately When you need to speed up to work the appliance please wet the bottom of the pot with little tap water See the Fig Fig 7 Open the lid of the appliance Fig 8 Press the blender into the pot Fig 9
Download Pdf Manuals
Related Search