US-ORBIT-PRO - USER MANUAL
Contents
1. Press TARE PRINT key to make sure the LCD shows zero Put the 1 st load on to the platform and get the 1st reading Press ON MEM key to store the 1st reading M will appear on the upper left corner of the LCD The LCD should show zero now if not press TARE PRINT key Now put the 2nd load on to the platform and get the 2nd reading Press ON MEM key again M disappears and the LCD shows the SUM of the 1st and 2nd readings Now you can press ON MEM key again to store the 1st SUM LCD should go back to zero and M appears again Put the 3rd load on to the platform and get the 3rd reading Press ON MEM key to get the 2nd SUM of the 1 st 2nd and 3rd readings Go through steps I to 6 above for further Operation CALIBRATION INSTRUCTIONS 1 2 3 Allow the scale to warm up for about 2 minutes Remove all items from the platform When the LCD shows 0 0 and in the gram mode press and hold the CAL MODE key until the LCD shows 500 0 Now put on to the platform the calibration weight 500g Wait for about 4 seconds and do not disturb the scale as it is performing internal calibration 6 The LCD will show PASS if calibration is successful 7 If LCD shows E calibration did not succeed repeat steps 1 to 6 above Tested to comply with FCC standards2. US BALANCE The Only Weigh US ORBIT PRO User Manual Precision Tabletop Scale Capacity 2000 g x 0 1g Weighing modes g 0z ozt dwt Thank you for purchasing US ORBIT PRO Precision Table Top Scale Please read all operation instructions carefully before use e Allitems included with this package Main Unit Measurement Pan Container Cover Weight AAA Batteries x4 SPECIFICATIONS Max capacity 2000 g Resolution 01g Weight units g oz dwt ozt Stainless steel platform Operation temperature 0 40 C Green and blue back light Auto Changing Memory function indication M Counting function indication C Low battery indication 5A Protective cover container Overload indication EEEEEE Power supply 4 x AAA batteries Auto oft around 40 seconds if no operation Value Weight Units Memory Indicator ap p GD GD GD Gp Positive Weight lidicator i f gi ij if if a Low Battery Indicator a gt gt a gt aD Negative Weight Indicator i i jj i if i I TS ER TD E T counting Mode FUNCTION KEY a vita bl P ounting Mode ana nut Backlight On Off Calibration Tare Counting Set TO CHANGE BATTERY Ensure terminals Plug for DC are correct way round DC 6V AC Adaptor CONVERT WEIGH WEIGHT UNITS Press CAL MODE KEY once at a time to select unit in the order of g gt oz gt dwt gt ozt gt
3. rEF 5 gt rEF10 gt rEF20 gt rEF50 gt g TO WEIGH Place the scale on a firm flat surface If using bowl or any other container place container on platform after turning on scale Then press TARE PRINT key to zero reading The scale weighs in grams ounces dwt or ozt Select your preference with the Cal Mode button Place interns to weigh in container or directly onto platform The weight will now be displayed As more weight is added the display will automatically increase Replace the batteries when the scale displays battery symbol OVERLOAD WARNING Remove the weight immediately when the scale displays EEEEEE or damage to the scale will occur TO MAINTAIN Clean after use with a lightly dampened cloth Do not use solvents Do not place on microwave oven or dish washer or immerse in water TO COUNT 1 To set your scale to parts counting mode scroll through to weighing by pressing CAL MODE key when the display shows zero Continue to press CAL MODE key to select the desired parts counting until rEF5 rEF10 rEF20 and rEF50 pieces After rEF50 is displayed the indicator will scroll back to gram weighing mode With the selected parts counting unit still displayed Put the desired sample into the bowl or container Allow the sample to stabilize for about 5 seconds then press TARE PRINT key C appears on the bottom left of the display The parts counting TO INPUT MEMORY a 8 9 10
Download Pdf Manuals
Related Search