PA-AC_WIFI-1 Quick Start Guide
Contents
1. it will turn off It not please check LED status table and or visit www intesishome com support 4 2 Connection without WPS This method assumes that your AP does not support WPS connection mode and that you have a Wi Fi compatible device laptop mobile phone tablet etc 1 Connect your Wi Fi device to the IntesisHome Wi Fi network Network that starts with Intesishome 2 Open the web browser of your Wi Fi device IntesisHome A and write anv URL Scanning for networks d This may take up to 45 seconds IntesisHome welcome site will open 3 Select your AP from the list of available APs x IntesisHome WIN Setup by clicking on select button In this example APWifi IntesisHome 4 If the desired AP is not showed press the Select from the following existing networks browser Refresh button pie ee sia hrs APWifi Good WPA WPA2 Personal AD IntesisBox PA AC WIFI 1 User s Quick Start Guide 4 If the network is protected write the correct password and click next button This screen may change depending on the security protocol used by your AP 5 Confirm that you want to connect to that network by clicking Save and apply button IntesisHome A Connect with SSID WEP Auth Mode WEP Auth Index g7 WEP Key Value SS IntesisHome A Wireless Configuration Summary SSID APWifi Security WPA WPA2 Personal Click on Save and Apply to confirm your settings If conne2. IntesisHome A QUICK START GUIDE IntesisBox PA AC WIFI 1 User s Quick Start Guide 1 Product description The IntesisHome device is an external module capable of connecting Panasonic air conditioning units into your Wi Fi network in order to provide global connectivity and remote control applications through a friendly user interface 2 Packaging content IntesisHome device connection cable Quick Start Guide Warranty Document IntesisHome Device Button Top fixing hole Top hole for IntesisHome cable use IntesisHome LED Bottom fixing hole Front view Back view Figure 1 IntesisHome Device IntesisBox PA AC WIFI 1 User s Quick Start Guide 4 IntesisHome device connection procedure Before starting the set up process make sure that the Air Conditioning unit AC is connected to the power supply line and IntesisHome LED is steady green There are two connection modes available with WPS and without WPS NOTE Check your Access Point AP user s manual to find if available the WPS button or WPS activation procedure 4 1 Connection with WPS This method assumes that your Access Point AP supports WPS connection mode 1 Press IntesisHome device button IntesisHome device LED starts blinking blue 2 Activate your AP WPS mode IntesisHome device LED will change blinking color If connection has been successful IntesisHome LED will blink up to one minute and then
3. ction has been successful IntesisHome LED will blink up to one minute and then it will turn off It not please visit www intesishome com support LED status table corto Steady Ready to be connected Performing WPS connector Connecting to access point and server Downloading configuration Wait Alternate Error Connecting to Access point Try to connect Red Green f blink again and make sure you write the correct password Alternate Server not reached Check if there is Internet Yellow Green a i blink connectivity on your Access Point 5 IntesisHome Device registration Go to the user area at www intesishome com to register as a user and also to configure the installed device s 6 FAQ and support For any question or problem related with the product or the installation procedure please visit our support center at www intesishome com support
Download Pdf Manuals
Related Search