Manual - DOMUSWIRE
Contents
1. T TELE 1 WIDE PRESET NOT DEFINED xi LENS INIT Use the Function Setup switch in the Lens initialization item select LENS INIT SETUP AUTO or MANUAL and then press the DAY Function Setup switch RETURN 41 AUTO Initialize the lens by setting the date Initializing time can be set to 1 7 days and the lens is initialized at the specified time interval since the setting MANUAL The Lens will reset when you press the Function Setup switch 28 setup EXPOSURE 1 Press the Function Setup switch to access the main setup menu and then position the indicator over EXPOSURE using the Function Setup switch 2 Press the Function Setup switch to confirm e BRIGHTNESS Use this feature to adjust image brightness Position the indicator over BRIGHTNESS using the Function Setup switch Then increase or decrease brightness level using the Function Setup switch while verifying the changes on screen Set END once desired level is obtained IRIS Set IRIS to AUTO or MANUAL Position the indicator over IRIS using the Function Setup switch and then select the desired iris mode using the Function Setup switch AUTO The iris is automatically activated upon illumination MANUAL Manual iris configuration Set IRIS to MANUAL using the Function Setup switch and then press the Function Setup switch Increase or decrease iris level using the Function2. SAMSUNG TECHWIN High Resolution 37x Weatherproof Camera User Manual SC0 2370 High Resolution 37x Weatherproof Camera User Manual Copyright 2010 Samsun Trademark g Techwin Co Ltd All rights reserved SAMSUNGTECHWIN 15 the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co shall be reproduced di Disclaimer Samsung Techwin mal no formal guarantee s the user s own respon without prior notice Warranty If the product does no Ltd shall reserve the copyright of this document Under no circumstances this document hall be provided Use of this document and the subsequent results shall be entire operate properly in normal conditions please let us know Samsung Techwin wi the problem for free o charge The warranty period is 3 years However the followings are excluded f the system behaves abnormally because you run a program irrelevant to the system operation Deteriorated performance or natural worn out in process of time stributed or changed partially or wholly without formal authorization of Samsung Techwin kes the best to verify the integrity and correctness of the contents in this document but y on sibility Samsung Techwin reserves the right to change
3. the selection of the blinking character The abcdefghijklm character is then saved and the cursor in the nopaqrstuvwxyz entry field moves to the next position 0123456789 d Repeat steps through c until the desired lt gt CLR POS END name has been entered English 37 90138 e Setup 4 Correcting Mistakes Move the cursor th CLR and press the Function Setup switch to clear the entire entry To modify one character use LEFT or RIGHT to position the cursor above the character to be modified and click the Function Setup switch after selecting the character to enter Enter a title move the cursor to POS and press the Function Setup Switch The entered title FRONT T Pa appears on the screen Select the position to display the title on the screen by moving the 4 direction of Function Setup Switch and press the Function Setup Switch When the position is determined select CAM ID Displays camera ID on top left corner of the screen CAM INFO Displays camera information on screen MOTION ALARM You can toggle the use of the camera alarm 200 Use th is feature to display the current zoom magnification level on screen Position the indicator over ZOOM using the Function Setup switch Then set to ON using the Function Setup switch FONT COLOR You can select the font color white yellow green red blue LANGUAGE You can select the men
4. the shutter speed 0 X2 X4 X32 X64 X128 X256 X512 The bigger ratio setting brightens darker area but it may blur image of moving object and the Auto Focus may not appear to be optimal English 31 dnias e Setup SPECIAL 1 Press the Function Setup switch to access the main setup menu and then position the indicator over EXPOSURE using the Function SUR Setup switch WITE BAL BACKLIGHT 2 Press the Function Setup switch to confirm MOTION DET FOCUS lt 1 EXPOSURE lt 1 SPECIAL RESET EXIT PRIVACY Hide an area you want to hide SPECIAL SETUP th on the screen PRIVACY OFF When the SPECIAL menu screen is DAY NIGHT AUTO displayed using the Function Setup DIS OFF Switch so that the arrow indicates SYNC INT PRIVACY COMM ADJ eer IMAGE ADJ 4 Set up the mode using the 4 direction MONITOR buttons DISPLAY 4 RETURN AREA SEL You can select up to 12 areas PRIVACY SETUP AREA MODE Determines whether to use gt AREA SEL the area selected in the AREA MODE AREA SEL MASK COLOR NE 39 BOTTOM un 79 LEFT km 14 RIGHT a 53 RETURN 4 1 MASK COLOR Determine area color You TOP can select Green Red Blue Black White Gray 32 setup DAY NIGHT You can display pictures in color or black and white SPECIAL SETUP PRIVACY OFF When the SETUP menu screen is DAY NIGHT AUTO lt displayed select DAY NIGHT using
5. Humidity 50 C 50 C 14 F 122 F Less than 90 RH Ingress Protection IP68 Electrical Input Voltage Current Dual 24 1090 amp 12VDC 10 Dual 24VAC2 1096 8 12VDC 10 Power Consumption 28W Fan amp Heater On AC 24V Mechanical Color Material Body Dark Gray Aluminum Dimension WxHxD 103 x 114 x 378mm Weight 1 95Kg The specification for this product may change without prior notice for product improvement English 41 SNOILV 13103ds specifications DIMENSION 6 DENS USES n Mm 42 Specifications English 43 STW protocol command description STW PROTOCOL COMMAND DESCRIPTION Byte1 Byte2 Byte3 Command Packet STX CAM ID HOST ADDR Command Name Return Packet STX CAM ID HOST ADDR Checksum CHECKSUM CALCULATION UNARY OPERATION OF SUMMAT ION FROM BYTE2 TO BYTES EX CHECKSUM BYTE2 BYTE3 BYTE9 Function Reset all data to factory default value Reset Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move focus lens to far direction Focus Far Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move focu
6. the DIS OFF Function Setup switch so that the arrow SYNC INT indicates DAY NIGHT COMM ADJ lt _ e IMAGE ADJ 4 o Select a desired mode using the Function MONITOR LCD4 J 79 Setup switch according to the picture DISPLAY 4 display you want RETURN 4 AUTO The mode is switched to Color in a normal environment but switches to B W mode when ambient illumination AUTO SETUP is low To set up the switching time gt DWELL TIME or speed for AUTO mode press the Function Setup switch RETURN 4 COLOR The picture is always displayed in color B W The picture is always displayed in black and white DWELL TIME You can select tday night switching delay time from gt 5 7 10 15 20 30 40 60 sec DURATION You can select the day night switching point lux Color gt B W B W Color Fast 2 6Lux 4 2Lux Slow 1 2Lux 6 0Lux When AGC is middle mode EXT This mode allows you to apply a desired filter to external signals 4 You cannot control the DAY NIGHT menu when AGC in the EXPOSURE menu is OFF this time the exchange between DAY mode and NIGHT mode operates as like selecting COLOR mode The OSD key does not work for seconds when switching to Color or B W to ensure stable camera operation The camera may focus less well under infrared illumination than under normal illumination The brightness of illumination is changeable by installed environm
7. 6 Wide 3 9 Tele Angular Field of View 55 5 Wide 1 59 Tele V 42 5 Wide 1 19 Tele Min Object Distance 1 5m Focus Control Auto Manual One AF Zoom Movement Speed 2 8 sec Wide to Tele Operational Multi language Support Multi language Support English French German Spanish On Screen Display English Japanese Spanish French Italian Chinese Russian Polish Czech Portuguese Taiwanese Korean Romanian Serbian Swedish Danish Turkish Portuguese Camera Title Off On Displayed 15 characters Day amp Night Auto ICR External Color B W Backlight Compensation Off BLC HLC Contrast Enhancement SSDR Off On Digital Noise Reduction SSNRIIE Off On Digital Image Stabilization Off On Motion Detection Off On 8 programmable zones Privacy Masking Off On 12 programmable zones Sens up Frame Integration 2X 512x 40 Specifications Gain Control Off Low Medium High Manual White Balance ATW Outdoor Indoor Manual AWC 1 700K 11 000K Electronic Shutter Speed 1 60 1 120 000 sec 1 50 1 120 000 sec Digital Zoom Off On 1x 16x Flip Mirror Off On Alarm 1 Out Communication Coaxial Control SPC 300 Compatible RS 485 Coax Pelco C Coaxitron Protocol RS 485 Samsung T Samsung E Pelco D Pelco P Panasonic Bosch Honeywell Vicon AD Operating Temperature
8. AFh CHECK SUM 0002h 00h 00h 00h 00h AFh CHECK SUM 0002h 00h 00h 00h 00h AFh CHECK SUM 0100h 00h 00h 00h 00h AFh CHECK SUM 0100h 00h 00h 00h 00h AFh CHECK SUM 0200h 00h 00h 00h 00h AFh CHECK SUM 0200h 00h 00h 00h 00h AFh CHECK SUM English 49 NOILdIHISIG GNVWINOD 1001014 MIS DECLARATION CONFORMITY Application of Council Directive s Manufacturer s Name Manufacturer s Address European Representative Name European Representative Address Equipment Type Environment Model Name Beginning Serial NO Year of Manufacture Conformance to 2004 108 EC SAMSUNG TECHWIN CO LTD SAMSUNG TECHWIN CO LTD 42 SUNGJU DONG CHANGWON CITY KYUNGNAM KOREA 641 716 CCTV Camera SC0 2370P C54N6V3Z300001X 2010 03 24 EN 55022 2006 EN 50130 4 2003 We the undersigned hereby declare that the equipment specified above conforms to the above Directive s Manufacturer SAMSUNG TECHWIN CO LTD Legal Representative in Europe Signature 2 Gu Signature Full Name BONJENG GU Full Name Position QUALITY CONTROL MANAGER Position Place CHANGWON KOREA Place Date 2010 03 24 Date CN SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 82 31 8018 3745 SAMSUNG TECHW
9. DE You can select NONE EVEN or ODD for the parity bits 34 setup 11 om T 41 38 e e CONTROLLER RET PKT You can choose whether to send an ACK signal when the communication control command is issued to the camera e IMAGE ADJ Includes image quality or j 1 SPECIAL SETUP special function factors PRIVACY When the SETUP menu screen is displayed select DAY NIGHT IMAGE ADJ using the Function Setup switch so DIS that the arrow indicates IMAGE ADJ SYNC l l COMM ADJe Select a desired mode using the Function Setup IMAGE ADJ 4 switch MONITOR DISPLAY 4 RETURN English_35 Setup H REV You can flip the picture horizontally on the screen V REV You can flip the picture vertically on the screen SHARPNESS As you increase this value the picture outline becomes stronger and clearer When the SHARPNESS level is too high video output may be unnatural or noisy IMAGE SETUP H REV OFF V REV OFF SHARPNESS ON RETURN 4 SHARPNESS SETUP P LEVEL 16 RETURN 4 1 Monitor Please change the settings value of video appropriate to your monitor LCD Please select this menu item when using an LCD monitor CRT Please select this menu item when using a CRT monitor 36 setup SPECIAL SETUP PRIVACY DAY NIGHT DIS SYNC COMM ADJ4 IMAGE ADJ 4 MONITOR DISPLAY RETURN LCD MONITOR SETUP
10. IHISAG 1090108d MIS STW protocol command description Function Display OSD menu on the screen Clear OSD menu and save current menu setup Command Packet A0h CAM ID HOST ADDR 050 Menu On Off Return Packet A0h CAM ID HOST ADDR Parameter P1 00h ON 01h OFF Function Move OSD arrow to up 050 Menu Up Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move OSD arrow to down 050 Menu Down Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move OSD arrow to left 050 Menu Left Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move OSD arrow to right 050 Menu Right Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move to inside menu OSD Menu Set Command Packet AOh CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move to upper menu 050 Menu ESC Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR 48 STW Protocol Command Description 00B1h P1 00h 00h 00h Afh CHECK SUM 00B1h P1 00h 00h 00h Afh CHECK SUM 0008h 00h 00h 00h 00h AFh CHECK SUM 0008h 00h 00h 00h 00h AFh CHECK SUM 0010h 00h 00h 00h 00h AFh CHECK SUM 0010h 00h 00h 00h 00h AFh CHECK SUM 0004h 00h 00h 00h 00h AFh CHECK SUM 0004h 00h 00h 00h 00h
11. IN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Park Tol Free 1 877 213 1222 1 310 632 2195 Chertsey Surrey UNITED KINGDOM KT16 OPS www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungtechwin com www samsungsecurity com P NO Z6806134202A 01
12. RN EXIT English 25 Setup AUTO Select AUTO and press the Function Setup switch to confirm ZOOM POS SETUP Increase or decrease optical Zoom ZOOM or digital zoom D ZOOM positions using the Function Setup switch while verifying the changes on screen Enabling D ZOOM ON means that digital zoom will activate once optical zoom ends 1 TELE 1 WIDE The focus automatically adjusts when the lens zooms in and out ONE PUSH Focus is automatically adjusted just once after zoom position ZOOM FOCUS POS SETUP is changed Select ONE PUSH and the Function Setup switch to confirm Increase or decrease optical zoom ZOOM or digital zoom D ZOOM positions using the directional 1 TELE 1 WIDE key of Function Setup Switch lt NEAR gt FAR while verifying the changes screen Press the Function Setup switch once the desired image quality is obtained MANUAL Select MANUAL and press the Function Setup switch to Z00M FOCUS POS SETUP confirm Increase or decrease optical zoom ZOOM or digital zoom D ZOOM positions moving directional key of Function Setup Switch while verifying the changes on screen 1 TELE WIDE Press the Function Setup switch NEAR gt FAR once desired image quality is obtained Focus can be manually adjusted independent of moving zoom 26 setup ZOOM TRACK Select ON for the SMART ZOOM item in the MOTION DETECTION menu and press Function Set
13. SURE SETUP menu is OFF gt Check that SHUTTER of EXPOSURE SETUP menu is A FLK or MANUAL The Motion Detection function does not work gt Check that MOTION DET of SPECIAL SETUP menu is OFF Color is not correct Chec he setting of WHITE BAL SETUP menu The screen flickers continually Check that direction of camera turns toward the Sun When coaxial communication is not available Make sure that the camera and monitor are installed within the recommended distance Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded English 39 SNILOOHSATENOYL specifications SPECIFICATIONS 5 2370 SCO 2370P Video Imaging Device 1 4 Exview HAD CCD Total Pixels 811 H x 508 V 795 x 596 V Effective Pixels 768 H x 494 V 752 H x 582 V Scanning System 2 1 Interlace Synchronization Internal Line Lock Frequency H 15 734 2 V 59 94Hz H 15 625KHz V 50Hz Horizontal Resolution Color 600 TV lines B W 700 TV lines Min Illumination Color 0 2Lux F1 2 50IRE 0 0004 Lux Sens up 512x B W 0 02 Lux F1 2 50IRE 0 00004 Lux Sens up 512x S N Ratio 52dB AGC off Weight on Video Output CVBS 1 0 Vp p 759 composite Lens Type Focal Length Zoom Ratio 3 5 129 5mm Optical 37x Max Aperture Ratio 1 1
14. Setup switch while verifying the changes on screen MAIN SETUP SSDR WHITE BAL BACKLIGHT MOTION DET FOCUS 4 EXPOSURE 4 1 SPECIAL RESET EXIT EXPOSURE SETUP BRIGHTNESS mmu 50 IRIS AUTO SHUTTER AGC HIGH SSNR3 MEDIUM SENS UP OFF RETURN EXPOSURE SETUP BRIGHTNESS mnn 50 IRIS AUTO SHUTTER AGC HIGH SSNR3 MEDIUM SENS UP OFF RETURN IRIS MANUAL SETUP IRIS F No RETURN 4 English_29 90138 e Setup SHUTTER Control image brightness by adjusting shutter speed Position the indicator over SHUTTER using the Function Setup switch Then select the desired shutter mode A FLK ESC MANUAL using the Function Setup switch MANUAL Manual shutter speed setting NTSC 1 100 PAL 1 120 Flicker free mode ESC Automatic shutter speed setting optimal Auto operation is possible only when the IRIS is set to MANUAL Position the indicator over SHUTTER using the Function Setup switch Then gt SHUTTER VAL ect the desired shutter mode A FLK ESC MANUAL Setup switch Press the Func using the Function ion Setup switch to complete 4 EKPOSURE SETUP BRIGHTNESS IRIS SHUTTER 50 AUTO HIGH MEDIUM OFF DESIT AGC SSNR3 SENS UP RETURN SHUTTER MANUAL SETUP 1 50 RETURN mage may become unstable if the camera is set to ESC mode and faces a strong fluorescent light Under ESC mode t
15. T OFF OFF OFF MANUAL AUTO 1 AUTO TRACK FAST OFF OFF OFF MANUAL 1 AUTO 41 AUTO TRACK FAST OFF OFF OFF MANUAL 4 1 D Z00M LIMIT SETUP LIMIT RETURN 4 1 X2 English 27 dnias e Setup ZOOM POS INIT Moves to the controlled ZOOM position when the power is truned on FOCUS SETUP and the initial ZOOM position has been set TRACK 4 AUTO If you turn the power off and on 200 SPEED FAST the zoom magnification level is D Z00M OFF set to the previous level that was gt ZOOM POS INIT 4 OFF set before the power went off USER PRESET 4 OFF MANUAL The zoom magnification level MANUAL ga can be set from 1x to 37X S The zoom postion is saved after 5 seconds when you set zoom function USER PRESET Preset user designated FOCUS SETUP configurations using this feature Position MODE AUTO J the indicator over USER PRESET using 700M TRACK AUTO TRACK the Function Setup switch and then set 200 SPEED FAST to ON using the Function Setup switch D Z00M OFF Press the Function Setup switch to confirm ZOOM POS INIT 4 1 OFF PRESET NO Up to 128 preset PANALO bis configuratons are supported MAIN PRESET SAVE Save configured preset PRESET CLEAR Clear configured preset RETURN Revert to the FOCUS SETUP menu ZOOM POS SETUP USER PRESET SETUP gt PRESET NO JJ summ 3 PRESET SAVE PRESET CLEAR RETURN 41
16. art 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense IC Compliance Notice This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations of ICES 003 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable a reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office
17. as been dropped Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus English 7 contents INTRODUCTION INSTALLATION amp CONNECTION SETUP TROUBLESHOOTING SPECIFICATIONS STW PROTOCOL COMMAND DESCRIPTION 8 contents 10 11 14 15 16 17 18 19 39 40 42 44 Features What s included Component names and functions Connecting to Monitor Connecting to Power RS 485 Communication control Using Coaxial Communications Menu Configuration Menu Setup Troubleshooting Specifications Dimension STW Protocol Command Description introduction FEATURES 37x Optical Zoom The built in SCO 2370 optical zoom lens is a highly durable component It features auto focus auto iris and zoom functions High Resolution By adopting a diagonal 1 4 410 000 NTSO pixel 470 000 PAL pixel SONY CCD the camera produces clear picture quality with a horizontal resolution of 600TV lines for color and a horizontal resolution of 700TV lines for BW mode SSNR3 Samsung Super Noise Reduction Function The high performance W V DSP chip effectively removes low light gain noise and ghosting to provide clear images even in dark environments DAY amp NIGHT ICR This camera has a function that automatically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime condi
18. at registers or other apparatus including amplifiers that produce heat 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet SNOILONYLSNI ALSAVS LNV LHOdMWI 9 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 10 Only use attachments accessories specified by the manufacturer 11 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 12 Unplug this apparatus during lightning storms or when unused for long periods of time When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or h
19. backlight by using the features of the proprietary W V DSP chip 1 When the SETUP menu screen is displayed select BACKLIGHT by using the Function Setup switch so that the arrow indicates BACKLIGHT MAIN SETUP SSDR WHITE BAL p gt BACKLIGHT MOTION DET FOCUS a EXPOSURE 41 SPECIAL RESET EXIT English_21 Setup 2 Select a desired mode using the Function Setup switch depending on the camera purpose OFF Not being used BLC Enables a user to directly select a desired area from a picture and to view gt LEVEL LOW the area more clearly TOP TU 30 HLC HIGH LIGHT COMPENSATION BOTTOM mn 75 If the scene contains extremely bright light LEFT 30 argas such as from car headlight the RIGHT nn 70 light can mask out much of the on screen RETURN 4 detail LEVEL Adjust level of the HLC function LOW MIDDLE HIGH MASK TONE Change the brightness 3 Select a desired mode using the Function Setup switch and press the Function Setup switch Select BLC to adjust the area to be enhanced then adjust the level 4 Since the following symptoms may occur according to the ambient illumination when BLC is selected set it to OFF Color or screen changes unnaturally Noise appears in the bright part of the screen Since the performance of the BLC function may be affected by the area of the bright part of the screen optimize the installation angle for the
20. below If the distance between the camera and the monitor exceeds the recommended maximum please use an auxiliary video amp E HUT 300m 3C2V RG 59 U 450m 5C2VRG 6 Y 600m 7C2V RG 11 U l4 fthe camera is controlled through coaxial communication please use a video amp intended for coaxial communications Regular video amps do not transfer coaxial signals English 17 Setup MENU CONFIGURATION MAIN SETUP MENU SSDR 0FF ON ATW MANUAL AWC SET WHITE BAL OUTDOOR INDOOR BACKLIGHT OFF BLC HLC MOTION DET 0FF ON MODE ZOOM TRACK ZOOM SPEED FOCUS lt D ZOOM ZOOM POS INIT USER PRESET LENS INIT RETURN BRIGHTNESS IRIS SHUTTER EXPOSURE AGC e SSNR3 SENS UP RETURN PRIVACY DAY NIGHT DIS SPECIAL 4 1 SYNC COMM ADJ IMAGE ADJ MONITOR DISPLAY RETURN RESET EXIT 18_ setup MENU SETUP Use the Function Setup switch within the camera 41 38 e Function Setup switch E 1 Press the Function Setup switch for 2 seconds Short pressing the Function Setup Switch activates the AUTO FOCUS Main setup menu is displayed on the monitor screen MAIN SETUP Select the function SSDR ON I bhai using the Function using the Function Setup switch WHITE BAL ATW Setup switch BACKLIGHT OFF MOTION DET OFF FOCUS EXPOSURE SPECIAL RESET EXIT 2 Select the desired
21. best BLC performance f you increase LIMIT the screen display may be distorted For high performance of BLC function We recommend that you set IRIS to AUTO in the EXPOSURE setup Activating BLC may cause the camera to repeat the Auto Focus operation depending on lighting conditions It is recommended that you use the Focus Setup menu in One Push or Manual mode Smart Zoom and BLC cannot be used in conjunction with each other Setting up Smart Zoom and then BLC automatically cancels Smart Zoom 22 setup Enable the user to change the level mask tone area HLC SETUP LEVEL MIDDLE MASK TONE umuna 7 RETURN lt 90138 e 4 For effective viewing of license plates there is minimum required illumination and the shutter speed needs to be faster than 1 200sec Because there can be a difference in the effectiveness of HLO according to the amount of light area in the screen optimize the installation angle for the best HLC performance When dark the is only activated when a bright light exceeding a specific size In NIGHT ONLY mode The HLC is not activated in day light or when bright light is not present at night In NIGHT ONLY mode The HLC is not activated when the D Z00M mode is or DIS mode is ON English 23 Setup MOTION DETECTION This product has a feature that will detect movements of objects in 8 different areas on the screen The camera dete
22. ch FOCUS 1 EXPOSURE 1 SPECIAL 1 RESET EXIT 20 setup Select one of the following 5 modes as appropriate for your purpose ATW Select this when the color temperature is between 1 800 and 10 500 MANUAL Select this to fine tune White Balance manually Set White Balance first by using the ATW or AWC mode After that switch to MANUAL mode fine tune the White Balance and then press the Function Setup switch To find the optimal luminance level for the current environment point the camera towards a sheet of white paper and press the Function Setup switch If the environment changes readjust it OUTDOOR Select this when the color temperature is between 1 700 K and 11 000 sodium light inclusion INDOOR Select this when the color temperature is between 4 500 and 8 500 dnias e 4 White Balance may work properly under the following conditions In this case select the AWC mode When the color temperature of the environment surrounding the subject is out of the control range 6 0 clear sky or sunset When the ambient illumination of the subject is dim If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically the White Balance operation may become unstable BACKLIGHT Unlike conventional cameras the SCO 2370 is designed to deliver a distinctive subject and background at the same time even when the subject is
23. connection method varies depending on the type of monitor and accessories Please refer to the user s manual for each instrument Please turn off the power when connecting 14 installation amp connection CONNECTING POWER The recommended adaptor specification for SCO 2370N P is AC 24V 1 5A over Please check the standard power requirement before connecting the power NOILOANNOO 8 NOILVTIVLSNI Power Input Terminal When the resistance value of copper wire is 20 C 68 F Copper wire size AWG 24 0 22mm2 22 0 33mm 20 0 52mm 18 0 83mm Resistance value 0 m 0 078 0 050 0 030 0 018 Voltage drop V m 0 028 0 018 0 011 0 006 As shown in the table above voltage decreases as the wire gets longer Therefore having an excessively long distance between the power adaptor and the camera may affect the camera s performance Standard voltage for camera operation DC 12V 10 AC 24V 10 There may be some deviation in voltage drop depending on the type of wire and the manufacturer 2 Please use a power adaptor that meets the required standards Please connect the power after installation English 15 installation 8 connection RS 485 COMMUNICATION CONTROL Connecting to RS 485 Control Cable I E rm CONTROL CABLE SPEC WHITE RS 485 BLUE RS 485 Using RS 485 communication will enable you to control th
24. cts an object s movement by sensing disparity of outline brightness levels and color The camera sends a detection signal out via the MD output terminal and will zoom into a pre determined point 1 When the SETUP menu screen is displayed MAIN SETUP select MOTION DETECTION by using the SSDR Function Setup switch so that the arrow WHITE BAL indicates MOTION DETECTION BACKLIGHT gt MOTION DET FOCUS lt 1 EXPOSURE 4 SPECIAL RESET EXIT OFF MOTION DETECTION mode is cancelled ON Any motion in the selected areas is observed AREA SEL You can select the area you wish to observe from MD SETUP AREA MODE Determines whether AREA MODE to use the MD area SENSITIVITY selected in SENSITIVITY SMART Z00M SENSITIVITY You can select low RETURN a or high level When SENSITIVITY is high motion detection sensitivity is increased to recognize even small movement SMART ZOOM Smart zoom is operated in connection with MOTION DETECTION When the SMART ZOOM function is ON while the MOTION DETECTION mode is ON the zoom goes to the TARGET ZOOM position once motion is detected Once the zoom action is finished and DWELL TIME has passed the zoom returns to the SMART ZOOM position 24 setup START ZOOM moving the Function Setup switch in the SMART ZOOM item SMART 200 SETUP to select the zoom position from 1x to 37x to be returned after the SMART ZOOM action is ov
25. d Sunshield Adaptor 1EA Tapping Screw 3EA User Guide Quick Set up Guide Installation Video Output Cable 10 introduction COMPONENT NAMES AND FUNCTIONS Front NOILONGOHINI Camera Sunshield Sunshield adaptor Fixing the sunshield onto the camera Lens Video Output Terminal to Monitor Used for monitoring of video output When camera installation Function Setup Switch Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item Front cover English 11 introduction Back Power input terminal Connect the power as specified for each model here O MD Output Terminal Motion detection signals are output through this terminal RS 485 control terminal You can control SETUP MENU through this port by using external controllers like a Remote controller that RS 485 Communication is supported For details see page 16 Video output terminal Video signals are output through this port Connect this port to the Video IN port of a monitor Connector MD OV There is no motion Signal Level 5 0 5sec co USER There is motion 1 0 Output MD Motion Detection Output format is open collector 12_ introduction COMPONENT NAMES AND FUNCTIONS Heater amp Fan This product is equipped with built in heater amp fan and capable of maintai
26. e 2 Do not install in a location subject to high temperature over 50 C low temperature below 50 F or high humidity Doing so may cause fire or electric shock 3 If you want to relocate the already installed product be sure to turn off the power and then move or reinstall it 4 Remove the power plug from the outlet when there is a lighting storm Neglecting to do so may cause fire or damage to the product 5 Keep out of direct sunlight and heat radiation sources It may cause fire Oo Install it in a place with good ventilation 7 Avoid aiming the camera directly towards extremely bright objects such as sun as this may damage the CCD image sensor 8 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 9 The Mains plug is used as a disconnect device and shall stay readily operable at any time 10 Do not expose the camera to radioactivity Radioactivity exposure may damage the CCD English 5 Safety Information FCC Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to p
27. e OSD menu from a SAMSUNG TECHWIN System Controller or DVR 1 Connection to a PC Connect the camera to the PC via a RS 485 converter using RS 485 and a serial cable EX SERIAL PORT OF THE PC COM1 gt SERIAL CABLE gt RS 485 CONVERTER gt RS 485 CONTROL CABLE 2 Connection to a DVR or System Controller Connect the RS 485 cable to the connection ports of the DVR or System Controller 485 Control Board Connection Port RS 485 Control Port CONNECTION TERMINAL WHITE TRX CONNECTION TERMINAL BLUE TRX RS 485 Communication establishment initial value Item Camera ID BAUD RATE UART MODE RET PKT Initial value 1 9600 8 NONE 1 DISABLE 4 When making a control system to control the camera please use to the protocol SAMSUNG T SAMSUNG E PELCO P PELCO D VICON PANASONIC BOSCH HONEYELL AD When you connecting to RS 485 CONTROL TERMINAL please peel off the outer skin inside the RS 485 CONTROL TERMINAL 16 installation amp connection USING COAXIAL COMMUNICATIONS Coaxial Communications System OSD Control method CAMERA DVR CONTROLLER 2 SET MENU ENTER OSD KEY UP UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT 2 o RIGHT RIGHT KEY JOYSTICK RIGHT B DVR 3 5 Video Cable The camera s video output port is connected to the monitor with a BNC coaxial cable shown
28. ent English 33 Setup DIS The DIS mode can compensate for SPECIAL SETUP vibration of the camera PRIVACY OFF DAY NIGHT AUTO 1 gt DIS OFF 4 When DIS is operating D ZOOM does not SYNC INT operate COMM ADJe IMAGE ADJ 4 MONITOR LCD DISPLAY 4 RETURN _ SYNC Two synchronization modes are available INTERNAL and EXTERNAL LINE LOCK In LINE LOCK mode it synchronizes the camera s video out signal to the external SYNC signal INT Internal synchronization LL External line lock synchronization If you choose LL you can adjust the desired phase Press the Function Setup switch You can adjust the desired phase from O to 359 COMM ADJ Communication Adjustment This function sets up the camera COMMUNICATION SETUP communication status when controlling the PROTOCOL SAMSUNG T camera through an external controlled device CAMID 1 BAUD RATE 9600 When the SPECIAL menu screen is displayed using the Function Setup Switch so that the arrow indicates UART MODE 8 N 1 RET PKT DISABLE COMM ADJ RETURN 4 1 Set up the mode moving the 4 direction of the Function Setup switch PROTOCOL Select the communication PROTOCOL SAMSUNG T PELCO D PELCO P BOSCH HONEYWELL VICON AD SAMSUNG E PANASONIC CAM ID Determines the camera s identification number between 0 and 255 BAUD RATE You can select 2400 4800 9600 19200 38400 57600 bps UART MO
29. er TARGET ZOOM Use the Function Setup RETURN 4 switch in the TARGET ZOOM item to select the zoom position from 1x to 37x to be used during MOTION DETECTION DWELL TIME Use the Function Setup switch in the DWELL TIME item to select a time between 5 and 60 seconds for the dwell time before the zoom is returned to the SMART ZOOM position 5 7 10 15 20 30 40 60 sec START ZOOM TARGET ZOOM DWELL TIME dnias e 2 Tips on Using the Motion Detection Feature The feature may not function properly under flickering light conditions The camera interprets sudden changes in lighting and subsequent change in brightness of an object as motion With the feature enabled other algorithms may require additional time to operate This system does not guarantee prevention of fire or theft The manufacturer shall not be held responsible for any accident or damage incurred FOCUS 1 Press the Function Setup switch to access the main setup menu and then position the indicator over FOCUS using the Function Setup switch 2 Press the Function Setup switch MODE You can select the most suitable zoom mode Move the arrow indicator to MODE using Function Setup switch MAIN SETUP FOCUS SETUP SSDR gt MODE AUTO 1 WHITE BAL Z00M TRACK AUTO TRACK BACKLIGHT Z00M SPEED FAST MOTION DET D Z00M OFF FOCUS 1 ZOOM POS INIT 4 OFF EXPOSURE 41 USER PRESET OFF SPECIAL LENS INIT 4 1 MANUAL 41 RESET RETU
30. feature using the Function Setup switch Fach pressing of the Function Setup switch moves the indicator to the next or previous feature Move the arrow indicator to the desired feature item 3 Change the status of the selected feature using the Function Setup switch 4 When completed move the arrow indicator to EXIT and press the Function Setup switch Features marked with a 1 have an accessible submenu An item with the icon is unavailable due to function settings English 19 Setup SSDR Samsung Super Dynamic Range SSDR illuminates darker spots of an image while retaining the same light level for brighter Spots to even out the overall brightness of images with high contrast between bright and dark spots 1 When the SETUP menu screen is displayed MAIN SETUP select SSDR by using the Function Setup gt 5508 Switch so that the arrow indicates SSDR WHITE BAL 2 Use the switch to change the SSDR level BACKLIGHT according to the contrast between bright and MOTION DET dark areas FOCUS EXPOSURE 41 SPECIAL RESET EXIT SSDR ON SSDR OFF White Balance WHITE BAL Use the White Balance function to adjust the screen color 1 When the SETUP menu screen is displayed select WHITE BAL by using the Function MAIN SETUP Setup switch so that the arrow indicates SUR WHITE BAL gt WHITE BAL BACKLIGHT 2 Select a desired mode using the Function MOTION DET Setup swit
31. for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system 6_ safety information important safety instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 7 Do not install near any heat sources such as radiators he
32. ge to the product Do not connect multiple cameras to a single adapter Exceeding the capacity may cause abnormal heat generation or fire 4 Securely plug the power cord into the power receptacle Insecure connection may cause fire 5 When installing the camera fasten it securely and firmly The fall of camera may cause personal injury Do not place conductive objects e g screwdrivers coins metal parts etc or containers filled with water on top of the camera Doing so may cause personal injury due to fire electric shock or falling objects 4 safety information 7 Do not install the unit in humid dusty or sooty locations Doing so may cause fire or electric shock 8 If any unusual smells or smoke come from the unit stop using the product In such case immediately disconnect the power source and contact the service center Continued use in such a condition may cause fire or electric shock 9 f this product fails to operate normally contact the nearest service center Never disassemble or modify this product in any way SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product Doing so may cause fire or electric shock NOILVINYOANI ALSSVS CAUTION 1 Do not drop objects on the product or apply strong blows to it Keep away from a location subject to excessive vibration or magnetic interferenc
33. gt GAMMA 0 45 PED LEVEL unn emm 17 COLOR LEVEL 50 RETURN 4 CRT MONITOR SETUP gt PED LEVEL mumuk umun 17 COLOR LEVEL 50 RETURN JJ USER Please use this menu item when using a monitor other than standard ones USER MONITOR SETUP You can change the gamma PED gt GAMMA 0 55 level and color gain in the sub menus PED LEVEL Itm 17 COLOR LEVEL 50 RETURN 4 DISPLAY Use this feature to designate a 4 name for the camera which will display on SPECIAL SETUP the monitor screen ium CAM TITLE If the camera is named it is DIS displayed on the monitor SYNC 9 Press the Function Setup switch to display the main COMM ADJe setup menu and move the arrow indicator to CAM naa TITLE using the Function Setup switch gt DISPLAY lt Set CAM TITLE to ON using the Function Setup RETURN Switch DISPLAY SETUP AM TITLE FF If the CAM TITLE feature is set to OFF the name AM ID p will not displayed in the monitor CAM INFO ON MOTION ALARM OFF 200 MAG ON Press the Function Setup switch FONT COLOR WHITE LANGUAGE ENGLISH You can enter up to 15 characters RETURN 41 a Move the cursor to the character entry field using the Function Setup switch b Use the 4 direction of Function Setup Switch CAMERA TITLE SETUP to select a desired character ABCDEFGHIJKLM Press the Function Setup switch to confirm NOPQRSTUVWXYZ
34. he brightness can be adjusted using the Function Setup switch AGC Auto Gain Control For brighter images EXPOSURE SETUP Position the indicator over using BRIGHTNESS 50 the Function Setup switch IRIS AUTO Set AGC to the desired mode using SHUTTER the Function Setup switch AGC HIGH HIGH Wide range gain value SSNR3 MEDIUM adjustment SENS UP OFF MANUAL Selecting gain value range 1 4198 OFF Disabled LOW Narrow range gain value GAIN MANUAL SETUP adjustment MEDIUM MEDIUM range gain value P AGC VAL F1 6 adjustment RETURN 4 1 30 setup SSNR3 Samsung Super Noise Reduction On screen noise reduction 4 LOW Low noise reduction MEDIUM Medium noise reduction HIGH High noise reduction OFF Disabled Changing the AGC setting from LOW to HIGH results in greater sensitivity as well as on screen noise Setting AGC to OFF locks SSNR3 configuration SENS UP This feature ensures clear images at night or under low light conditions SENS UP LIMIT SETUP Position the indicator over SENS UP using gt LIMIT the Function Setup switch RETURN JJ Set SENS UP to the desired mode using the Function Setup switch AUTO Select this mode for use in night time or under low light conditions OFF Disabled Once mode is set the user can configure the SENS UP limit by increasing decreasing
35. ning appropriate internal temperature as well as defrosting and dehumidification Front cover 1 While powered the heater operates according to the camera s internal temperature Note that the fan always operates if powered While the camera is powered the heater operates if its internal temperature drops below 0 C When the camera s internal temperature reaches 10 C the heater stops operating Carnera s internal temperature is within 50 C 10 C the message Low Temperature Wait appears on the black background The camera initializes and outputs video signal once it gets above 10 Be careful not to touch the heater while installing if the ambient temperature is below than 10 C since the heater may operate immediately after applying the power f the front cover is cross threaded or not correctly tightened the camera housing will not be weatherproof When you combine the front cover combine the triangle of front cover and triangle of main body confront each other Frost can be found if the camera is left under 10 C and then powered and the frost will be removed automatically in about 3 hours The camera will be initialized if its internal temperature becomes 80 C or higher English_13 NOILONGOULNI installation 8 connection CONNECTING TO MONITOR Please connect the video output terminal located on the back of the camera to the monitor Monitor The
36. om amp focus lens moving AF Stop Command Packet A0h CAM ID HOST ADDR Return Packet A0h ID HOST ADDR Function Unconditionally execute auto focus One push AF Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Save current user preset configuration information Command Packet A0h CAM ID HOST ADDR User Preset Save Return Packet AOh CAM ID HOST ADDR Parameter P1 00h USER PRESET 1 80h USER PRES ET 128 Function Execute selected user preset Command Packet AOh CAM ID HOST ADDR User Preset Exec Return Packet AOh CAM ID HOST ADDR Parameter P1 00h USER PRESET 1 80h USER PRES ET 128 Function Clear selected user preset Command Packet AOh CAM ID HOST ADDR User Preset Clear Return Packet AOh CAM ID HOST ADDR Parameter P1 00h USER PRESET 1 80h USER PRES ET 128 46_ STW Protocol Command Description 00FFh CHECK SUM 00FFh CHECK SUM 0000h 00h 00h 00h 00h AFh CHECK SUM 0000h 00h 00h 00h 00h AFh CHECK SUM 0045h 00h 00h 00h 00h AFh CHECK SUM 0045h 00h 00h 00h 00h AFh CHECK SUM 0003h P1 00h 00h 00h CHECK SUM 0003h P1 00h 00h 00h Afh CHECK SUM 0007h P1 00h 00h 00h Afh CHECK SUM 0007h P1 00h 00h 00h CHECK SUM 0005h P1 00h 00h 00h Afh CHECK SUM 0005h P1 00h 00h 00h Afh CHECK SUM English_47 NOILd
37. s lens to near direction Focus Near Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move zoom lens to wide direction Zoom Wide Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR Function Move zoom lens to tele direction Zoom Tele Command Packet A0h CAM ID HOST ADDR Return Packet A0h CAM ID HOST ADDR 44 STW Protocol Command Description 4 Il Byte5 Byte 6 Byte7 Byte8 Byte9 Byte10 Byte11 CAMMAND DATAS DATA4 DATA5 DATAG ETX CHECKSUM CAMMAND DATAS DATA4 DATA5 DATAG ETX CHECKSUM 000Fh 00h 00h 00h 00h AFh CHECK SUM 000Fh 00h 00h 00h 00h AFh CHECK SUM 0100h 00h 00h 00h 00h AFh CHECK SUM 0100h 00h 00h 00h 00h AFh CHECK SUM 0200h 00h 00h 00h 00h AFh CHECK SUM 0200h 00h 00h 00h 00h AFh CHECK SUM 0040h 00h 00h 00h 00h AFh CHECK SUM 0040h 00h 00h 00h 00h AFh CHECK SUM 0020h 00h 00h 00h 00h AFh CHECK SUM 0020h 00h 00h 00h 00h AFh CHECK SUM English 45 NOILdIHISIG 1090108d MIS STW protocol command description Function Command Packet A0h HOST ADDR Return Packet A0h 700M Direct Packet 0 HOST ADDR Parameter P1 P2 OPTICAL ZOOM 0000h 06EAh DIGITAL ZOOM 256 10 Ratio 1 EX D Z00M 1 1x P3 E7h 256 10 11 1 Ratio 11 me ans 1 1x D Z00M 2 0x P3 7Fh 256 10 20 1 Ratio 20 me ans 2 0x Function Stop zo
38. the contents of this document resolve Before operating the camera confirm the camera model and correct input power voltage To help you understand this manual thoroughly we ll introduce our model description 5 0 2370 SERIES NTSC MODEL PAL MODEL SC0 2370N SC0 2370P MODEL DESCRIPTION SCZ 2370X lL SIGNAL SYSTEM SIGNAL SYSTEM N NTSC MODEL P PAL MODEL Safety information RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION REDUCE THE RISK OF ELECTRIC SHOCK DO NOT COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions WARNING 1 Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product Incorrectly connecting the power supply or replacing battery may cause explosion fire electric shock or dama
39. tions to provide optimum colors and BW mode operates in night time conditions to enhance the definition of the image IP68 Approved Dust and Rain Resistant With dust and rain resistant design the camera can be installed outside under building eaves or places that are exposed to the dust and rain SSDR Samsung Super Dynamic Range For images with high contrast between bright and dark Areas from difficult lighting conditions such as backlighting this camera selectively illuminates darker Areas while retaining the same light level for brighter Areas to even out the overall brightness Communication RS 485 Coaxial communication methods are supported R8 485 Communications SAMSUNG T SAMSUNG E Pelco P Pelco D Panasonic Bosch Honeywell AD Coaxial Communications Pelco Coaxitron Temperature control The built in heater amp fan enables normal operation under a severe condition of 50 C OSD The camera s OSD is complimented by 18 foreign languages NTSC Korean English French Spanish Japanese Portuguese Taiwanese PAL English French German Spanish Italian Chinese Russian Czech Polish Portuguese Romanian Serbian Swedish Danish Turkish English 9 NOILONGOYHINI introduction WHAT S INCLUDED Check if the following items are included in the product package L type hexagon wrenches 4 0mm SC0 2370 Sunshield e 74
40. u language according to your requirements NTSC Korean English French Spanish Japanese Portuguese Taiwanese PAL English French German Spanish Italian Chinese Russian Czech Polish Portuguese Romanian Serbian Swedish Danish Turkish END Select this to save the SPECIAL menu settings and return to the SPECIAL menu RESET To reset your camera to factory default condition EXIT To finish setup menu 38 setup troubleshooting TROUBLESHOOTING If the product does not function properly please see the below for trouble shooting PROBLEM Nothing appears on the screen SOLUTION Check that the power cord and line connection between the camera and monitor are fixed properly Check that you have properly connected VIDEO cable to the camera VIDEO output jack The image on the screen is dim gt ls lens stained with dirt Clean your lens with soft clean cloth gt Set the monitor to proper condition gt If the camera is exposed to too strong light change the camera position The image on the screen is dark gt Adjust the contrast feature of the monitor gt If you have an intermediate device set the 750 Hi z properly The camera is not working properly and the surface of the camera is hot gt Check that you have properly connected the camera to an appropriate power source The SENS UP function does not work gt Check that AGC of EXPO
41. up switch to change the settings for the SMART ZOOM function Use the Function Setup switch in the ZOOM item to select AUTOTRACK or TRACK and press Function Setup switch to activate the zoom action focus function AUTO TRACK Zooming in while FOCUS SETUP MODE gt ZOOM TRACK ZOOM SPEED 0 700 ZOOM POS INIT 4 USER PRESET 4 LENS INIT RETURN deciding or adjusting the status of the focus TRACK The camera moves the focus track which is established OFF Only the zoom lens moves ZOOM SPEED Configure zoom tracing speed using this feature Position the indicator over ZOOM SPEED using the Function Setup switch and then set to desired mode using the Function Setup switch FAST To move zoom fast SLOW To move zoom slowly MEDIUM To move zoom at medium speed D ZOOM Configure magnification limit from x2 x16 using this feature Position the indicator over D ZOOM using the Function Setup switch Set D ZOOM to ON and press the Function Setup switch to confirm Set ZOOM LIMIT to the desired level using the Function Setup switch 4 When the DIS is enabled you cannot use the D 700M FOCUS SETUP MODE Z00M TRACK 200 SPEED 0 700 ZOOM POS INIT 4 USER PRESET a LENS INIT 41 RETURN 1 FOCUS SETUP MODE ZOOM TRACK ZOOM SPEED D Z00M ZOOM POS INIT 4 USER PRESET 4 LENS INIT RETURN 4 AUTO 1 AUTO TRACK FAS
Download Pdf Manuals
Related Search