User`s Manual - LY International
Contents
1. a IM Multi room Music System 3 Connection Schematics for Infrared Learning Transmitter and Central Controller DVD player Central Control Device nee eer ner ner o 2 1 VIDE INPUT TUNER DYD ZONES SOE pred INPUT The transmitter connected to REMOTE OUT 1 port on the infrared remote controller corresponds to external DVD player the transmitted connected to REMOTE OUT2 corresponds to TV 4 Connection Schematics for Zone 1 Output Connection Schematics for 5 1 Channel Output Host Devic SUB Y WOOFER SURROUND CENTER m DM 2 N 5 i ii Center Left Right Sub Woofer Surround Multi room Music System Placement Schematics for 5 1 Sound Box 0 Center Front Left 3 Front Right 4 Rear Left Surround Rear Right Surround Sub Woofer The PA output power of each channel 0 5 is 60W Line signal output from channel Integrated Connection Schematics for Zone 1 Output AR Ach h Ahhh i Ce led le Line audio signal 5 1 Channel HiFi TV Wired Remote Controller Infrared remote controller 5 1 Channel D Center 2 Front Left 8 Front Right 4 Rear Left Surround Rear Right Surround Sub Woofer me r2. e HiFi PA Zone 2 Line Output CT Zone 4 Sound Box Zone 12 Sound Box 1 Multi room Music System X Operating Instructions for Host 1 Power On State Connect all the wires correctly and check for no error Then connect the power supply Press down Power On Off key to switch on the device If there is no zone opened the system will be under standby state and display the standby interface on the screen Fig 1 1 The power indicator is red In this case the timer power output is off Under standby state you may press ON OFF key or ZONE key to enter the main interface Fig 1 2 After a zone is opened the current state of switching audio source and volume in this zone will be immediately displayed In this case the power indicator will be green while the timer power output will be opened Note If all the zones are closed the timer power output will also be closed If one of the zones is opened the timer power output will be automatically opened 2010 03 05 POWER OFF MON 8 35 16 ON OFF key 2 DVD 3 TUNER 1 PC 4 5 6 Fig 1 1 Fig 1 2 NEXT TIMER POINT TUES 07 55 00 2 Operating Instructions for Manual Control of Zone 2 12 The control of zone 2 12 includes the selection of audio source adjustment of volume and tone and testing of clock sound for each zone The operating procedures are as follows Notes In the o
3. dp oon ie ee 20 D 9 Mrarcd Learning a a 20 od Copy Timer POM eee A E 21 G20 SYSTEMS TAG E O 21 X Functions of Infrared Remote Controller 22 X Fabrication of Wired Remote Controller 23 zc Abautthe Trormatol USB DISK FIG edo oa Pesto co 24 lt 2 T E 27 SPSCINCATONS m cC 28 EE M ooo ee 28 28 0 EE TT 28 Lo oegqec o ooo _ 29 Multi room Music System X General Description 1 About the Multi room Music System The HS 6818 is a set of modern Multi room Music system to your desire Except all the functions of the traditional family audio systems this system is also provided with 1 Timer function that is preset the specific time and the task to be executed at that time 2 The function that different rooms can hear different music at the same time This system has another important function That is you can control the worki
4. LY INTERNATIONAL ELECTRONICS Multi room Music System HS 6818 User s Manual Home Central Audio System HS 6818 HS 3402 xog punog xog punos IR Remote Controller HS 21 Welcome to use the Multi room Music system For better use of this equipment please read this manual thoroughly before use http www lyintlcorp com Contents zs SOMES AL DSSS OU OM ss d etas a i i dr duet Nn 1 NTNU oco 1 2 Functional Characteristics of System 1 X Appearance and Functions of Host Device 0000 0 eee ccccceessscccecccceesssssseeecccceeessssseeeseeceessssseeeeeees 2 oo 2 PO coo co 4 A CONMECION HAS UCTIONS EET 6 6 2 Connection Schematics for Tuner 6 Connection Schematics for Infrared Learning Transmitter and Central Controlle
5. 6 2 Time Calibration Under Operation Option interface rotate the digital wheel to move the cursor to Time Calibration option Then press the digital wheel to enter the time calibration interface Fig 6 2 Rotate the digital wheel to move the cursor to the desired time number When the letters become BO 5 po 05 CANCEL ADJ TIME white press the digital wheel again until the icon E appears behind Rotate the digital wheel to change the number After that press the digital wheel to confirm the selection and exit Fig 6 2 Complete the other settings by using the same method After completion move the cursor to Confirm option and press the digital wheel once to confirm the current operation and exit the time calibration interface Or you may move the cursor to Cancel option and press the digital wheel to cancel the current operation and exit the time calibration interface 6 3 Infrared Learning gt infrared learning refers to that the host device shall learn the key code of the remote controller for the machine to be learnt from so that the external infrared transmitter of REMOTE OUT 1 for DVD and REMOTE OUT2 for TV on the host device can recover the key code of remote controller to the control the machine to be controlled thus to realize the purpose of centralized control The host device can learn 5 function keys on infrared remote controller and may learn the remote controller of any brand A
6. USB storage 01 MP3 02 MP3 Directory 99 99 MP3 Jus gt Multi room Music System Store tracks in root and primary directories Up to 99 99x99 tracks can be stored USB storage 01 02 Directory 1 99 MP3 01 MP3 02 MP3 Directory 99 99 MP3 01 MP3 99 MP3 Multi room Music System Precautions Safety Precautions Disconnect the power plug of the console from the mains before wiring the system Ensure that the input voltage to the console is as specified to avoid a risk of damage to the console Never open the casing of the console to avoid electric shock from inside Always disconnect the power plug from the mains when the console is not used because the console is not disconnected from the mains even when the power switch is turned to the off position Do not leave the console in a too hot or too cold place Keep the console well ventilated to avoid damage to the console due to excessively high temperature Disconnect the power plug if the air is moist or the console is not used for a long period Remove the power plug from the outlet to disconnect the console from the mains before removing or reinstalling any part or disconnecting or reconnecting any plug or cable Do not open the casing fo
7. B GND AM TUNER OUT JL Aor SPEAKER OUTPUT p 60 KE x Us un x 4 FRONT mm a 79 3 4 B m L a a 78 78 CO VIDEO OUTPUT W N 2 RS HAIA HA mem X x vlo v wv vy v YV FA Al al ee SR x N y AN 2 y J N J NN J N 0 m i A TV ZONE2 ZONE4 ZONE6 ZONE8 ZONE10 ZONE12 Xx X X a NEST CENTER Y TESTE WOOFER 9 0 5 1 NN A J 24 4 iN SY 8 7 MAL NY zum m ATH Mts e OW RKO KO RY R V Dn un um un CH WC WI a a a 220V 50Hz 4A FRONT SURROUND WOOFER DVD PC TV AUX 2 1 ZONE2 j _ ZONEA ZONES ZONEG ZONE7 zones ZONES zONE1D zONE11 ZONE12 y E 9 10 11 12 13 14 15 16 17 1 Optical Input Port for 5 1 Channel For connection and description please refer to the Connection Instructions on 5 2 Tuner Mode Page 5 The tuner function is realized in form of modular design and can be separated from the host for installation at a position with better receiving effect The module is connected to the host via T568A network cable 3 Tuner Module Port TUNER INPUT For connecting the tuner module signal 4 DVD TV Video Input Port VIDEO INPUT
8. USB disks on market This system can only support MP3 file format with max bit rate at 320KBPS It cannot play the audio files of other formats If finding that some music cannot be played please check if that music conforms to the above requirements Supports FAT12 FAT16 and FAT32 file system To improve the operation speed and optimize management it is recommended that the USB disk or mobile HDD used only store MP3 files other than files in other format so as to facilitate the access of files and schedule programming Up to 99 primary directories can be created in the root directory in each of which up to 99 tracks can be stored Also up to 99 tracks can be stored in the root directory It is not necessary to create a secondary directory in a primary directory otherwise tracks in the secondary directory cannot be read Tracks can be stored in a USB disk by three methods as follows Create no directory and store all tracks in the root directory This method facilitates track selection but only 99 tracks can be stored Note To select a track in the root directory the directory number should be set as 00 e g 00 03 01 MP3 02 MP3 USB storage 99 MP3 otore all tracks in primary directories By this method tracks can be stored by classification and up to 99x99 tracks can be stored 01 MP3 02 MP3 Directory 1 99 MP3
9. gt above settings can be done by using the digital wheel or by using the key and After setting press Confirm to confirm and exit the setting interface 4 Independent Volume Rotate the digital wheel to move the cursor to Independent Volume option and press the digital wheel once to enter the Hall Independent Volume Control interface Fig 3 5 HALL CONTROL Press digital wheel HALL SEPARATE VOLUME CONTROL A OUR VOL amp TONE FRON SPK SETUP SEPA VOL Fig 3 2 Fig 3 5 Multi room Music System The hall independent volume control refers to independent control over the volume of several channels e g front and surround The operation is same as that for zone volume control It may be done by using digital wheel or by using the keys and ee 5 Mode Setting Rotate the digital wheel to move the cursor to Mode Setting option and press the digital wheel once to enter the Mode Setting interface Fig 3 6 HALL CONTROL Press digital wheel HALL SOUND FIELD MODE sour DVD 13 LISTEN AUTO SPK SETUP SEPA VOL DSP EFFECT LIVE Or press seve Fig 3 2 Fig 3 6 gt Listening Mode Three options are provided namely AUTO Dolby Pro Logic and STEREO Rotate the digital wheel to move the cursor to the pane behind Listening Mode and press the digital wheel When the icon appears in pane rotate the digital wheel to adjust the optio
10. high frequency to low frequency and will be stopped 2 automatically when searching station 5 Key for Moving Cursor Quick Search of Radio Station This is a multifunctional key D It is generally used to move the cursor backward or load the options for selection In some operations it is equivalent to a digital wheel rotating clockwise 2 Under radio working state it can be used to search the radio station from low frequency to high frequency and will be stopped automatically when searching a station 6 Enter Confirm Key SELECT Enter the setting interface or confirm the operating result In some operations it is equivalent to a digital wheel 7 LCD Screen Display the functions and state of the equipment 8 Operation TIMER Enter the operation option interface This interface includes such operation options as the timer setting time calibration infrared learning timer copy and system setting The interface is as shown below Option Control Key Operation Options TIMER SET ADJ TIME IR SETUP COPY TIMER SYSTEM SET EXIT 9 Key for Controlling MP3 MP3 Enter MP3 setting interface Key for Controlling Tuner TUNER Enter tuner setting interface 11 Key for Displaying Zone State ZONE Press this key to enter the main interface that displays the state of 12 10 Multi room Music System zones It can also used to enter the standby interface time interface from main inte
11. o x 1 O gt p INO Multi room Music System 5 Connection Schematics for Other Zone Output Connection schematics for Zone 2 and Zone 3 output The zone 2 and zone 3 are of stereo dual channel output with each channel at 60W The zone 2 has two groups of ports and the signals are output in parallel You may connect one of them or connect two sound boxes at the same time Take care that the total resistance shall not be lower than 4Q Zone be connecte d like this connected like this RI SL i Zone 2 Sound Box Zone 3 Sound Box Zone 2 Sound Box Zone 3 Sound Box Integrated connection schematics for other zones The zone 4 zone 12 of this device are of stereo dual channel output with each channel at 20W One zone corresponds to one video output Zone 1 TV Zone 12 TV Zone Zone 12 REMOTE INPUT ZONES 20 4 ZONE SaaS 1 bier m 3 ONES ZONES 11340 AAAS Bee NNI ZONET ZONE ZONES ZONEIO ZONE 1 ZONEIZ E E OCT AAA ee ee ee T ee ee rm SLED QUT EI ONES ZONES ZONE ZONES ZONEN He TUNER ovo 2 Boc
12. provided so that it can learn the remote controller of any brand RS232 remote control port provided so that the user may control the functions of this device via central control equipment Inductive touch keys are designed for the panel with two control modes available i e local control and remote control Video switching function provided The video is switched in synchronization with the audio input Appearance and Functions of Host Device Functions of Front Panel 1 2 3 4 5 6 8 9 10 11 12 POLE EN R EZ a e SIGITAL HEEL DIEET aid DIGITAL 15 16 Power Switch POWER Press this key to switch on the power and release it to switch off the power Power Indicator POWER This indicator is bright when the power is switched on And it is dark when the power is switched off This indicator is red under standby state and turns green under working state Zone ON OFF Key Execute ON OFF control to the zone directly from main interface 2 Return to main interface from any of 17 18 19 20 Level menu 4 Key for Moving Cursor Quick Search of Radio Station This is a multifunctional key D It is generally used to move the cursor forward or load the options for selection In some operations it is equivalent to a digital wheel rotating counterclockwise Under radio working state it can be used to search the radio station from
13. room Music System frequency directly For the operating methods please refer to the key functions of remote controller 6 Timer Programming Press the TUNER key on the panel to enter the operation option interface Fig 6 1 next page From this interface you may set five functions i e timer setting time calibration infrared learning time copy and system setting 6 1 Timer Setting From Operation Option interface rotate the digital wheel to move the cursor to Timer Setting option and press the digital wheel once to enter the timer setting interface Fig 6 1 1 next page Then rotate the digital wheel to carry out different settings for the timer point 6 1 1 Week Setting Rotate the digital wheel to move the cursor to Week option and press the digital wheel When the icon appears rotate the digital wheel load the week to be selected e g Wednesday Then press the digital wheel to confirm and exit 6 1 2 Add Timer Point Adjust the date of Week option to display of a specific day e g Monday In this case the other options on the interface will display all the information of the first timer point on that day If there is no display for other options on the interface Fig 6 1 2 next page it indicates there is no timer point on that day To add a timer point firstly press Add option and then set the other options If there is a timer point on this day it is needed to add a new timer po
14. 0V Working Power Input INN Multi room Music System X Connection Instructions 1 Schematics of Input Connection DVD Video Signal CUTFUT ZONES ZONE ZONES ZONE M ES ga NPU his p 1 P 1 2 iA tA em e Res pon gt CN CT AES aS IC b d f ff be RU 4 f i p S Ji Optical i um Ne amp NPUT EN 9 amp KO 2 See NY ease REMOTE OUT 20966 cONES 20NE10 ya amp TONES ZONE 5 1 INPUT PUT SAN ENN AN TV Video Signal 5 1 Channel L_____J Signal Stereo Signal n DVD Player PC TV Other Audio Sources Notes The 5 1 channel input and optical input on DVD player provide audio signal to zone 1 only When connecting the optical port please remove the dustproof cap as directed Please keep the dustproof cap properly To keep the optical port clean please cover up the dustproof cap when this port is long put out of use Optical Port The video signals input from DVD and TV are transmitted to 12 zones respectively via 12 video output ports on this device Except optical input the other inputs above are connected by using lotus connector Lotus Connector 2 Connection Schematics for Tuner Module The tuner function is realized in form of modular design and can be separated from the host for installation at a position wi
15. 585A T585A 1 pc FM antenna 1 pc AM antenna and antenna holder 1 set Instruction Manual 1 copy Compliance Certificate and Warranty Card 1 for each HS 21 1 pc USB disk 1 pc Multi room Music System X Performance Specifications 1 MP3 Player Compatible File MP3 format bit rate lt 320kbps Compatible Storage Device Compatible with most mobile disks with USB port Frequency Response 20Hz 20kHz 0 5dB 2 AM FM Tuner Range of Receiving Frequency 022 1620KHz 3 Timer Zone ON OFF Selection of audio source Volume control Treble bass control play control AM FM control Ringer ON OFF Output power ON OFF Programmable Ringer Types 3 types Programmable Items for Zone Multi room Music System 4 General Index 12 zones The zone 1 is of 5 1 channel with 5 Number of zones channels having PA and SW channel having line output The zones 2 12 are of dual channel Communication Port for Wired Remote RS475 Class 5 wires adopted Controller Central Control Port Type D socket RS232 Line input sensitivity 250mMV 25mV Line input resistance 5 channels for zone 1 6OW 4Q for each channel 2 channels for zone 2 and zone 2 6OW 4Q for each channel 2 channels for zone 4 12 20W 4Q for each channel Zone output frequency Total power of all outputs not over 400W Audio Frequency response 20Hz 20kHz 0 5dB Total Harmonic Distortion Less th
16. DVD 5 5 Wired Remote Controller Port for Zone 1 12 REMOTE INPUT Page 8 and 9 6 Zone 1 PA Output Port ZONE1 SPEAKER OUTPUT Page 7 7 Zone 2 Zone 3 PA Output Port Page 9 ZONE2 ZONE3 SPEAKER OUTPUT 8 AC220V Timer Power Output Socket TIMER The switching state of timer power output socket is interlinked to the switch of zone You may switch on any of the zones to switch on this power output This power output is switched off when all the zones are switched off Timer control over its switching state is provided Page 15 9 RS232 Port RS232 RS232 remote control port is provided so that the user may control the Multi room Music System functions of this device via central control equipment 10 Remote Control Output Port REMOTE OUT Page 7 Connected to infrared receiver for infrared learning of the function controls over external DVD and TV 11 5 1 Channel Input Port for Zone 1 5 1 INPUT For connection and description please refer to the Connection Instructions on page 5 12 DVD PC TV AUX Audio Input Port 13 Line Signal Output Port for Zone 1 Zone 2 14 5 1 Channel Sub Woofer Output for Zone 1 SUB WOOFER Page 7 This signal has no PA and it is output via line directly 15 Zone 1 12 Video Output Port Page 8 For transmitting the DVD TV video signals to 12 zones with its distribution changing synchronously with the audio signal 16 Zone 4 12 PA Output Port Page 9 17 AC22
17. Mode Setting option will be disabled Multi room Music System 4 Instructions for Manual Operation of MP3 Player Press key on the panel to enter the MP3 player setting interface Fig 4 1 Next page 4 1 Mode Selection This operation is used for selecting the play mode of MP3 Three modes are available for selection i e Play All Play One and Repeat One The Play All mode refers to sequential play of all the music files stored in the memory The Play One mode refers to play of the currently selected music only The Repeat One mode refers to repeated pay of the currently selected music How to Set Rotate the digital wheel to the pane behind the Mode option and press the digital wheel until the icon E appear behind the pane Rotate the digital wheel to select After selection press the digital wheel again to confirm and exit 4 2 Time Display As shown in Fig 4 1 next page the time 00 00 in front indicates the time progress of the music being played and the time 00 00 behind indicates the total time length of the music being played 4 3 Music Selection As shown in Fig 4 1 move the cursor to the pane Press and rotate the digital wheel to select The number in the front pane represents the directory Selecting 03 indicates that you have selected the third director in USB disk The number in the rear pane represents the serial number of the music in this directory The
18. This is used for setting the ringer type on timer point available with four options i e 1 2 3 and 1 refers to note 1 3 5 1 2 refers to note 1 5 3 1 3 refers to note 1 5 1 5 and refers to no selection of ringer To set the ringer rotate the digital wheel to move the cursor to Ringer option and press the digital wheel once until the icon appears After that rotate the digital wheel to select and then press the digital wheel again to confirm and exit 6 1 7 Timer Setting for MP3 Track gt gt Rotate the digital wheel to move the cursor to MP3 Setting option Then press the digital wheel once to enter MP3 Timer Setting interface Fig 6 1 3 Under this interface you may select 3 tracks for play on MP3 player at the timer point 00 00 represents the music to be played with the first two numbers indicating the directory of the music and the last two numbers indicating the serial number of the music in this directory Setting the directory to 00 indicates no directory and setting the music to 00 indicates no selection of music Move the cursor to the small pane displaying the number Then press the digital wheel once until the icon appears behind the number pane Rotate the digital wheel to select between Not Cycle Cycle and Sequential This setting is used for controlling the play sequence of 3 tracks selected After completing the above operation
19. an 0 2 1 3 rated output power at 1kHz Output Adjustment Ratio Less than 3dB from full load to no load Bass 10dB 100Hz Tone control Treble x10dB 10kHz Signal noise ratio SNR Over 76dB Stereo output for zone 1 and zone 2 1 AUX audio output 0 3V The zones 1 2 and 3 are provided with output short circuit protection overload protection and lt PA Output Protection DC protection as well as protection lock The zones 4 10 are provided with output short circuit and overload protection Power Consumption 400 TSize mm CNet weight The specification is subject to change without prior notification gt LY INTERNATIONAL ELECTRONICS http www lyintlcorp com
20. ance of this remote controller to HS 6818 device and wired remote controller is 10m IS Multi room Music System Schematics for Receiving Angle of Infrared Remote Controller The range of receiving angle for wired remote controller is 90 The range of receiving angle for the host device is 90 Note The infrared remote controller is only valid for zone 1 when it is directly used for operating the host device When using the SOURCE key on infrared remote controller to select the audio source for zone 1 it is available to select 5 1Line and OPTICAL But on the remote controller no direct selection keys are provided for these two sources x Fabrication of Wired Remote Controller Wires The host is connected to wired remote controller via twisted pair The fabrication of the connection wires is as shown below PEPER a DooboooooocoooO The ports on two ends shall match one by one ee ee 0 284 Remote controller Connected to Wired port to the host Remote Controller device P3 Socket Note For the operation of the wired remote controller please refer to the Operating Instructions for HS 80R Wired Remote Controller G Multi room Music System X About the Format of USB Disk File gt The USB disk and memories on market are developing fast while their state on market is complicated Therefore this product cannot be compatible with all types of
21. and fiber optical input function as well as Dolby and DTS decoding functions DSP surround processing function is provided and different sound field effects are available for selection AM FM radio function is provided This function is realized in form of modular design and can be separated from the host for installation at a position with better receiving effect The module is connected to the host via T568A network cable play function and USB port are provided Support the music files of format stored in USB disc MP3 player mobile HDD card reader and other storage devices Provided with DVD audio input port PC audio input port TV audio input port and one auxiliary audio input port Also provided with line audio signal output port for zone 1 amp 2 DVD TV video input port and 12 zone video output port Timer control function provided The user may edit 100 timing points With one week as a cycle it is possible to execute timer control over the ON OFF switching audio source volume clock AM FM radio MP3 play and output power ON OFF for 12 zones AC220V power socket provided with its switching state interlinked to the switch of zone d 1 2 3 Multi room Music System You may switch on any of the zones to switch on this power output This power output is switched off when all the zones are switched off Timer control over its switching state is provided Infrared learning function
22. d the low band with slow rotation of the digital wheel for one grid to decrease the frequency by one step One step is 50kHz for FM band and 9kHz for AM band The signal display and auto search are same as above You may also use the key on the panel to search the radio frequency automatically 5 3 Store Radio The radio frequencies no matter searched manually or automatically can be stored into 40 radio storage numbers by pressing MEMO key in combination with the key 14 or PI When storing the radio the storage number behind the Storage option on screen will blink with the first press of key After adjusting the storage number properly with or gt gt key you can press MEMO key again to store the searched radio frequency to the current storage number 5 4 Mute Mode By pressing 11 key on the panel the icon I on the screen will change to mm Fig 5 2 indicating that the radio is set to mute mode Press 9 again to return to voice state Upon arrival of the timer point the setting for the timer point will be executed AM FM PLAYER BAND FM SIGN wall 40 Tuner Mute Mode 100 45MHz STEREO Fig 5 2 5 5 Load Radio Frequency gt Inthe timer point you may load the stored radio frequency For the operating methods please refer to the instructions for setting of timer point gt You may use wired remote controller and infrared remote controller to load the stored radio 1 Multi
23. e sliding pane behind the Volume option Press the digital wheel once so that the icon E will appear behind the pane Then rotate the digital wheel clockwise or counterclockwise to move the slider left and right so that the zone volume will be increased or decreased accordingly Adjust the treble or bass tone in the same way Z2Use the wired remote controller or infrared remote controller to control the zone volume tone under the interface except Operation Option For control of the zone volume tone from wired remote controller please refer to the Operating Instructions for HS 80R Wired Remote Controller Ringer Testing Rotate the digital wheel to move the cursor to Ringer Testing option and press the digital wheel once so that a set of ringers will be output from the output port Note The remote controller does not provide the Ringer Testing function After completion of the above operations rotate the digital wheel to move the cursor to CONFIRM checkbox Then press the digital wheel once to confirm and exit The other zones from zone 2 to 12 may be controlled according to the method above um 2 DVD Press digital wheel ZONE 02 CONTROL 3 TUNER Fig 2 1 Fig 2 2 3 Operating Instructions for Manual Control of Zone 1 Zone 1 is different from other zones Except the 6 audio sources in other zones the zone 1 also has 5 1 channel and optical input source totaled 8 types of audio
24. face you can control the tuner band radio frequency and channel In zone 1 the tuner 1 Multi room Music System effect is best set to STEREO mode from the Listening Mode of Hall Sound Field Mode Setting 5 1 Selection From the panel you may press the BAND key under the screen to switch between AM FM You may use the band switching key on the wired remote controller and infrared remote controller to switch between AM and FM The frequency range of AM band is 522kHz 1620kHz and the frequency range of FM band is 87 00MHz 108 00MHz 5 2 Search Radio From the panel you may press the 144 and PPI key under the screen to search the radio storage number forward or backward and load the saved radio You may also search the radio by rotating the digital wheel Rotate the digital wheel clockwise to search toward the high band with slow rotation of the digital wheel for one grid to increase the frequency by one step One step is 50kHz for FM band and 9kHz for AM band When searching the radio station the black message indication bar as shown in Fig 5 1 will be displayed behind Signal option The indication bar will be become wider if the signal is strong and will become narrow if the signal is weak Quick rotation of the digital wheel for one turn can enter the auto search state It will be stopped when searching the radio frequency or reaching the highest band Rotate the digital wheel counterclockwise to search towar
25. fter learning it can establish relation with HS 80R gt Under Operation Option interface rotate the digital wheel to move the cursor to Infrared Learning option Then press the digital wheel to enter the infrared learning interface Fig 6 3 1 Under infrared learning interface rotate the digital wheel to move the cursor to the function key to be learnt For example to learn the Play function on DVD firstly select the Play function and press the digital wheel once When the characters Please press appear behind the Play option direct the infrared remote controller toward the host and press 11 Play Pause key once so that the character Set will be displayed behind the Play option indicating that the Play function has been learnt The method for learning of other key functions is same as that for learning of Play function DVD SETUP TV SETUP DVD SETUP TV SETUP PREV CH PLAY PR KEY PREV CH OK Fig 6 3 1 Fig 6 3 2 gt After infrared learning of a function you may use the infrared remote controller to directly control the appropriate functions of DVD or TV from the wired remote controller For example after learning the DVD Play function you may point the infrared remote controller toward the wired remote controller and control the Play Pause function of the Multi room Music System DVD player You may also control the Play Pause function of DVD player from DVD Control Inte
26. int In this case please firstly press Add option and then program the other information for this timer point The serial number of the added timer point will be always sorted at the end of all timer points on that day But the execution of the timer point will be automatically in accordance with the time sequence 6 1 3 Serial Number Setting Rotate the digital wheel to move the cursor to the number pane behind the Serial Number option and then press the digital wheel once so that the icon will appear behind the pane Then rotate the digital wheel to load the number to be selected After that press the digital wheel once to confirm and exit 6 1 4 Power Setting This operation is used for timer control over the power output socket on the rear panel of the equipment Item 8 on Page 4 The socket provides AC220V output for other equipment Setting the power to ON indicates that the output socket will have power output upon arrival of timer point Setting to OFF indicates that the output socket will have no power output upon arrival of timer point Setting to indicates default that is keep the last setting The operating method is same as that for serial number 6 1 5 Time Setting This is used for setting the start time of timer point The time may be accurate to second based on 24 hour system The method for time setting is same as that for serial number 6 1 6 Ringer Setting Multi room Music System
27. n Select the desired option and press the digital wheel again to confirm The effect under three modes is respectively STEREO Forcibly there is output from the speakers on front left and front right only but no signal output from other channels It is effective for all program types 2 AUTO Auto mode If the input is Dolby digital AC 3 the listening mode will be AC 3 DIGITAL If the input is DTS the listening mode will be DTS DIGITAL 8 Dolby Pro Logia Dolby Pro Logic processing mode which can process the stereo dual channel movie and music of any quality into surround output with 5 full range channels gt DSP Effect Operate as above by using the digital wheel Its function is to simulate the effect of different fields from internal DSP including HALL CHURCH DISCO THEATER LIVE MOVIE MUSIC and SIMULATE HALL Simulate the hall effect 2 CHURCH Simulate the church effect 8 DISCO Simulate the disco hall effect THEATER Simulate the theater effect 5 LIVE Simulate the live effect MOVIE Simulate the cinema effect MUSIC Simulate the music hall effect gt After setting select Confirm and press the digital wheel to confirm the setting and exit the setting interface Notes The 5 1 channel input and output have corresponding through mode Therefore when you have selected the program of 5 1 channel source in zone 1 0 The Speaker Setting option will be disabled 2 The
28. name of the selected music is displayed behind the pane When selecting the music please watch the notes on the lower of the screen If the screen displays No USB disk Please insert USB Disk this indicates that there is no USB disk inserted into USB port or you have inserted an USB disk that cannot be recognized by the equipment If you have inserted an USB disk and the equipment has accessed it the note USB disk inserted Please wait will appear on the lower of the screen If there is no music under a directory in USB disk the note No music found under this directory Please select another directory will appear if this directory is selected After that the equipment automatically turn to another directory and display the names of the music on that directory For manual control of player you may use the 14 and PPI key on the equipment panel to select the music and use the 1 key to control the play and pause You may also control by using the wired remote controller and infrared remote controller For detailed operating methods please refer to the introduction of key functions in the Operating Instructions MP3 PLAYER AM FM PLAYER CH 40 LOOP PLAY ALL 00 58 04 27 BAND FM SIGN iQ o3 No1 star 100 45MHz STEREO Al 4 1 Al 5 1 5 Instructions for Manual Operation of Tuner Press the TUNER key the panel to enter the tuner control interface Fig 5 1 From this inter
29. nes are provided with 6 audio sources The audio sources 5 1Line and Optical in zone 1 are not subject to timer control You may select one audio source at the same time for all the zones or select different audio sources If the MP3 or tuner is playing the program before arrival of the timer point but there is no setting to MP3 or tuner at the timer point then the MP3 and TUNER will maintain the play state before Ringer Setting This operation is used for setting the ON OFF state of ringer at the timer point Rotate the digital wheel to move the cursor to the pane behind the RINGER Then rotate the digital wheel to select After that press the digital wheel once to confirm the selection and exit Default If set to default this zone will keep the state prior to arrival of timer point After setting press Confirm once to confirm the above operations and exit the zone timer setting interface Then return to the timer setting interface Note One timer point can control all the zones For example after setting of zone 1 at a time point you may continue to repeat the above operations under this interface to set the other zones without pressing Confirm 6 1 10 Delete What is deleted in this operation is a specific timer point at present k Multi room Music System 6 1 11 Delete All Day What is deleted in this operation is the timer point of the full day on a specific date e g Wednesday currently displayed
30. ng status of the host from the room For example from the remote controller installed in the room you may select the program played by the host or control the volume and tone for your room The control host of this system has integrated the functions of MP3 player radio zone divider timer and pre post amplifier It is provided with DVD PC TV and AUX input ports for peripheral audio equipment and line audio signal output port for zone 1 and 2 There are 12 zones among which the 1 zone is of 5 1 channel and the others are of dual channel The 5 1 channel is available with two input modes i e line input and fiber optical input There are 12 remote control data interfaces connected to the wired remote controllers for 12 zones so that the host and remote controller set up an interactive dual way control providing high convenience for the users 2 Functional Characteristics of System Host e Modern Multi room Music system with plentiful functions There are 12 zones among which the 1 zone is of 5 1 channel Front Left Front Right Rear Left Rear Right Center and SW and the others are of dual channel e The 1 zone has 5 1 channel Front Left Front Right Rear Left Rear Right and Center SW without PA but output from the line with each channel having 60W output power The 2 and 3 zones have 2 60W output power and the 4 12 zones have 2x20W output power The 1 zone is provided with 5 1 channel line input
31. perations marked below the functions for rotating the digital wheel can also be done by using the key In the operations marked the functions for pressing the digital wheel can also be done by using the key peer Enter Zone Operation Interface Under the main interface rotate the digital wheel to select a zone Fig 2 1 and press digital wheel once to enter the zone operation interface Fig 2 2 Under this interface you may carry out the above operations to the opened zones Select Audio Source There are two ways for selecting the audio source 0 From zone operation interface rotate the digital wheel to move the cursor to pane behind the Program Note The cursor herein refers to the dark grey icon when an option is selected Press the digital wheel once so that the icon E will appear behind the pane Rotate the digital wheel to display the 6 types of audio source in turn When the desired audio source is on display stop rotating the digital wheel and press the digital wheel again so that the selected audio source will be allocated to this zone 2 Select the audio source from remote controller You may select by directly pressing the source name key or SOURCE SOURCE key on the remote controller 1 Multi room Music System gt Volume Tone Control There are two ways for controlling the volume and tone 0 From zone control interface you may rotate the digital wheel to move the cursor to th
32. r 8 4 Connection Schematics for Zone 1 Output 8 5 Connection Schematics for Other Zone 10 X Operaung Instructions TOR BOSE s eu 11 o __ 11 2 Operating Instructions for Manual Control of Zone 2 12 11 3 Operating Instructions for Manual Control of Zone 1 12 4 Instructions for Manual Operation of 15 i escei i wis n m T m 15 42 15 4 39 M siC Selection e 15 5 Instructions for Manual Operation of 15 MEE pee TUR 16 9 2 Search uen ED EDU LM IMEEM IUE 16 9 9 3SODOFOXR AGO ssec endo ode 16 IEE GS 16 Load Radio RFC QUCIIGY uisi best aa 16 0o 00 005 17 U a 17 62 Jine
33. r maintenance by yourself or unauthorized personnel in case of failure so as to avoid an accident or further damage Never place any corrosive on or near the console After sales Service Precautions We will provide a three year charge free warranty including replacement of parts from the date when you purchase provided that the product is installed and operated as specified The user should show the warranty card copy kept by the user and the sales invoice for repair The warranty is invalid in the cases as follows 1 The product is damaged due to wrong installation operation or handling 2 The product is damaged due to abnormal situations e g excessively high mains voltage or ambient humidity 3 The product is damaged due to disasters and accidents 4 The ID number on the product body is changed modified or removed 5 The product is repaired or modified by unauthorized personnel Please store the manual and warrant card well For problems or precautions not referred in this manual please contact our distributor or visit our site at http www lyintlcorp com p Multi room Music System Please contact our technician or distributor in case of failure within the warranty period We will take no responsibility in case that the product is disassembled or repair by unauthorized personnel X Packing List HS 6818 Device 1 set Power cord 1 pc Connection wire 1 5m for 2 2 lotus socket 1 pc Network cable T
34. respectively for AM band and FM band The serial number represents the storage number of radio frequency For manual operation of TUNER the radio frequency received has been saved in the storage number During timer setting we have just loaded the radio frequency saved during manual operation After completion press Confirm to confirm the setting and exit 6 1 9 Zone Setting Rotate the digital wheel to move the cursor to ZONE TIMER SET option then press the digital wheel to enter the zone timer setting interface Fig 6 1 5 Under this mode you can select a zone and set the volume program and ringer of this zone TUNER TIMER SET ZONE TIMER SET SOUR CHIME Fig 6 1 4 Fig 6 1 5 Zone Selection Rotate the digital wheel to move the cursor to the number pane behind the Zone option and then press the digital wheel once so that the icon E will appear behind the pane Then rotate the digital wheel to select After that press the digital wheel once to confirm and exit Volume Adjustment For this operation please refer to the description of Volume Adjustment under zone control Program Selection Select the audio source allocated this zone by using the method for selecting the zone as above The symbol indicates default setting and OFF indicates that this zone will close the previous programs upon arrival of the timer point The zone 1 of this system is provided with 8 audio sources and the other zo
35. rface on the wired remote controller 6 4 Copy Timer Point Under Operation Option interface rotate the digital wheel to move the cursor to Copy Timer option Then press the digital wheel to enter the Copy Timer COPY TIMER interface Fig 6 4 Under this interface you may copy the THE TIME POINTS OF timer points of a full day e g Monday to one day or several Fig 6 3 4 days show in the pane In this case the timer points for these several days will be same The operation is as follows gt Rotate the digital wheel to move the cursor to the selected Week option Press the digital wheel once until the icon E appears behind the week option Then rotate the digital wheel to select After that press the digital wheel to confirm the selection and exit gt Rotate the digital wheel to move cursor onto the pane 24 and press the digital wheel When the original symbol x changes into V it indicates that it has been selected The symbol x means not copy and the symbol means copy required gt After completion press Confirm to confirm the current operation and exit the Copy Timer interface Or press Cancel to cancel the current operation and exit the Copy Timer interface 6 5 System Setting Under Operation Option interface rotate the digital wheel to System Setting option and press the digital wheel to enter the system setting interface Fig 6 5 Under
36. rface The main interface is below 12 Multifunctional Digital Wheel 1 Used to search the radio frequency under tuner mode 2 Used to search the program under MP3 mode and select and confirm the play mode 3 Used to direct the options select the desired options and confirm the result of current operation under timer mode 4 Used to direct the options under zone control mode and enter the zone control interface also used to perform operations and confirm the result of current operation 13 Infrared Window IR 14 USB Port USB Used for inserting USB disk mobile HDD or card reader 15 Key for Switching Tuner AM FM Band BAND 16 Key for Radio Storage 17 MONO g This is a multifunctional key 1 Under tuner state it serves as a key for switching between mono stereo 2 Play stop key under state 18 1l Key This is a multifunctional key 1 Mute key under tuner state 2 Play Pause key under MP3 state 19 14 Key This is a multifunctional key D Akey for searching the radio station forward under tuner state Multi room Music System 2 A key for searching the desired backward under tuner state program forward under MP3 state 2 A key for searching the desired 20 gt gt Key program backward under MP3 This is a multifunctional key state D Akey for searching the radio station Forced Switching of Key Functions The function keys on the hos
37. s press Confirm to confirm the setting and exit the timer setting interface The MP3 program set for each timer point is valid for corresponding timer point only Upon arrival of the next timer point the system will execute the setting of the next timer point which will override the MP3 setting at current timer point If there is no setting to MP3 at the next timer point the MP3 will not activate upon arrival of next timer point OPTION ID ox TIME 10 cur Fig 6 1 Fig 6 1 1 MP3 TIMER SET SELECT THE DIR AND NUMBER 1o5 X12 2 00 06 07 00 Fig 6 1 2 Fig 6 1 3 6 1 8 TUNER Timer Setting Rotate the digital wheel to move the cursor to TUNER Setting option and press the digital wheel once to enter TUNER timer setting interface Fig 6 1 4 Under this interface you may select the TUNER band and frequency Move the cursor to the pane behind the Band option Then press the digital wheel once until the icon appears After that rotate the digital wheel to select Then press the digital wheel to confirm the selection and exit Select the Frequency option according to the method above Note The appearing during band selection indicates that this setting is 1 gt Multi room Music System defaulted and the STOP indicates that the TUNER program will be stopped upon arrival of the timer point For frequency selection there are 40 options
38. sources for selection Meanwhile it differs from other zones in view of zone output mode ad tone volume control The detailed operations are as follows Under the main interface rotate the digital wheel to move the cursor to zone 1 state pane Fig 3 1 Then press the digital wheel once to enter the zone 1 control hall control interface Fig 3 2 1 PC 2 DVD 3 TUNER Press digital wheel HALL CONTROL mum Fig 3 1 Fig 3 2 1 Select Audio Source The selection of audio source for zone 1 is same as that for other zones The only difference is that the zone 1 has two more options i e 5 1 channel 5 1LINE and optical OPTICAL source Except that the 5 1 channel 5 1LINE and optical OPTICAL can be manually selected from the host panel they can also be selected by pressing the SOURCE SOURCE on infrared remote controller 2 Total Volume Tone Rotate the digital wheel to move the cursor to Total Volume Tone 1 Multi room Music System option and press the digital wheel once to enter Hall Total Volume Tone Control interface Fig 3 3 where you can control the total volume and tone of zone 1 hall and carry out ringer testing For control of the volume and tone please refer to the Operating Methods for Control of Zone 2 12 Volume and Tone It will not be repeated here HALL CONTROL Press digital wheel HALL VOL AND TONE CONTROL SPK SETUP SEPA VOL Fig 3 2 Fig 3 3 3 Speaker Setting Ro
39. t the infrared remote controller can only control the manual control functions of zone 1 and control the MP3 player and tuner If the tuner is selected by using this key or the device is already under tuner state you may press this key again to switch between M band LY 1 Control key for zone ON OFF E 3 2 Direct selection key for audio source C m gt 3 Control key for play state DDG Play Pause Stop Previous Next ee LI 6 Tuner storage channel mute play 1 v 4 V control 7 9 A4 4 Number key Direct selection key for a a v 1 MP3 track direct selection for tuner RC and storage channel 5 Y Jj 8 Bass adjustment key Volume control key Source selection key Treble adjustment key NO To control MP3 player and tuner with this remote controller firstly select the audio source MP3 tuner And under play state you may press any of the key or number key to enter the state operation interface of this audio source Under any state you may press one of 6 source keys or SOURCE selection key to return to the main interface Under any state may press the volume tone control key to enter the zone control interface Under tuner play state you may press TUNER key so that the equipment wills switch between AM and FM band The control dist
40. t panel can be forcibly switched of their functions under Level menu interface For example you may touch MP3 key on the panel under tuner state interface so that the screen will change from display of tuner state to MP3 state in which case you can operate state You may touch TIMER to enter operation option interface touch ZONE or zone ON OFF key to enter the zone state display main interface of equipment system The interface that can be directly switched is as shown below AM FM PLAYER BANDFM SIGN m CH40 iQ 100 45MHz STEREO MP3 PLAYER OPTION A 0 57 9415 E 03 Override category Please wait 2 Functions of Back Panel 1 2 3 4 5 6 7 8 N CAUTION A A ee A RISK OF ELECTRIC SHOCK TTC DONOT OPEN ROH Ashe iig
41. tate the digital wheel to move the cursor to Speaker Setting option and press the digital wheel once to enter the Hall Speaker Setting interface Fig 3 4 Next page Among the setting options gt Testing Used for testing if the speakers work normally The Normal option refers to the current program being played Then exit the test state gt Front It is provided with two options i e Big and Small used for setting big sound box small sound box Center It is provided with three options i e Big Small and None Except for setting the big sound box or small sound box it is also used for setting the center signal YES or No under AUTO and Dolby Pro mode If setting to the center signal is distributed to the two loudspeakers on left and right Surround It is provided with three options i e Big Small and None Except for setting the big sound box or small sound box it is also used for setting the surround signal YES or No under AUTO and Dolby Pro mode If setting to No the surround signal is canceled HALL CONTROL Press digital wheel HALL SPEAKER SETUP SOUR VOL amp TONE 13 TEST NORMAL w RON LARGE SPK SETUP SEPA VOL CENT LARGE SURR LARGE Fig 3 2 Fig 3 4 gt Sub Woofer It is provided for setting sub woofer signal YES or No under AUTO and Dolby Pro mode If setting to the sub woofer signal is distributed to the two loudspeakers on left and right
42. th better receiving effect Installation of the tuner module on a better place can improve the receiving effect The tuner module is connected to the host via T586A network cable Even the module is installed on the host it can also be connected to the back panel on this device Notes To separate the tuner module from this device the extension wire if needed shall be fabricated as follows Multi room Music System RJ45 Port The colors from left to right are Green white green orange white blue Blue white orange brown white and brown The two ends Spring clamp match each other against you The tuner connection is as shown below Connection of tuner module to this device FM antenna AM antenna Press down _ Insert the Loosen the clamp cover connection wire clamp cover into the wire hole ZONE1 TUNER OUT W 59 oq E TUNER INPUT FM antenna l AM antenna Connection of tuner module for not installation on this device TUNER OUT VIDE RS232 IN INPUT OPTICAL TUNER 1 2 X N FEN 7 REMOTE OUT ERON Sh IND SUB FRONT SURROUND WOOFER
43. this interface you may set the lighting state of the screen background lamp auto and normally bright time length of ringer at timer point switching state of key alert language of system menu and ringer testing The operation is as follows gt Background Lamp Rotate the digital wheel to move the cursor to the pane behind Background Lamp and press the digital wheel once until the icon a appears behind the pane Press the digital wheel again and select between Normally Bright and Auto After selection press the digital wheel again to confirm and exit If there is no operation to the equipment within 20 seconds after setting to AUTO the screen will become dark automatically Set the other options by using the same method gt Ringer Length Set the time length of ringer at the timer point The length ranges from 04 seconds to 40 seconds gt KeyAlert The device may give out DI alert when operating the key and infrared remote controller You may turn it on or off at your option SYSTEM SET gt Language Language selection menu with E scr Chinese and English available for selection CHIME LO 045 CHIME TE gt Central Control Setting Backup function of KEY TONE ON the system not activated yet Fig 6 5 gt After setting press Confirm to confirm and exit the setting interface gt Multi room Music System X Functions of Infrared Remote Controller Note When pointed to the hos
Download Pdf Manuals
Related Search