Home

HSPA+ WIFI ROUTER

1. Connection Control gt Maximum Idle Time ko secon ds PPPOE Service Name optional Assigned IP Address IT optional MTU 0 is auto NAT disable I Enable gt Half Bridging I Enable Save Undo This utilises the Ethernet WAN port to provide a PPP over Ethernet PPPoE connection to the Internet DESCRIPTION The account name given to you by your ISP PPPoE Password The password given to you by your ISP For security this field appears blank If you don t want to change the password leave it empty Primary DNS Secondary DNS This feature allows you to manually assign a Primary and Secondary DNS Server optional Refer to your ISP for more information Connection Control There are 3 modes to select from Connect on demand The 3G25W R will connect to the internet when a client sends outgoing packets Auto Reconnect Always on The 3G25W R will automatically reconnect to the internet until the connection is manually disconnected Manually The 3G25W R will not connect to the internet until someone clicks the connect button in the Status page Maximum Idle Time The amount of inactivity on the internet connection before it is disconnected Set it to zero or enable Auto reconnect to disable this feature PPPoE Service Name Enter the service name if your ISP requires it optional Refer to your ISP for more in
2. Incoming Ports When the trigger packet is detected the inbound packets sent to the specified port numbers will be allowed to pass through the firewall The 3G25W R also provides predefined settings for some popular applications To use the predefined settings select your application from the Popular application list select an unused ID from the list and then click Copy to The predefined settings will then be added to the list Click Save to save the settings or Undo to cancel Miscellaneous Miscellaneous Items gt IP Address of DMZ Host en MECH gt UPnP setio E gt UPnP setting Save Undo A Demilitarized Zone DMZ Host is a computer without the protection of firewall It allows that particular computer to be exposed to unrestricted 2 way communication to the internet It is mostly used for Internet games Video conferencing Internet telephony and other special applications To enable DMZ enter the IP address of the computer you want to be live on the internet and click on Enable Note This feature should be used only when necessary UPnP Setting The device also supports uPnP Ifthe DMZ host operating system supports this function enable it to automatically configure the required network settings Click Save to save the settings or Undo to cancel HSPA WIFI ROUTER User Guide YML25WVR 32 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY
3. Login Username and Password forgot my login username and or password Correct Action Press the Reset button for ten seconds and then release it When the LINK LED begins to blink the defaults have been restored and the 3G25W R restarts You can now login with the factory default password admin without the quotes It is highly recommended to change the default username and password Make sure you store the username and password in a safe place HSPA WIFI ROUTER User Guide YML25WVR 50 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES WLAN Interface cannot access the 3G25W R from the WLAN or ping any computer on the WLAN Correct Action Check the Wi Fi LEDs on top of the unit and verify the WLAN is enabled as per the LED Indicator section If you are using a static IP address for the WLAN connection make sure that the IP address and the subnet mask of the 3G25W R and your computer s are on the same subnet You can check the routers configuration from the Network Setup page Internet Access cannot access the Internet Correct Action Make sure the 3G25W R is turned on and connected to the network You can verify this by checking which LEDs are illuminated and then referring to the LED Indicator section to verify the current connection status Verify your 3G settings from the Network Setup page If you are unsure of the required 3G Settings APN Username Pass
4. NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS HSPA WIFI ROUTER User Guide YML25WVR 56 www netcommlimited com Mell C ROGERS NETCOMM LIMITED Head Office Rogers Rocket and Mobius design are trademarks of or used under license from Rogers Communicati
5. Subnet mask Default gateway Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server Validate settings upon exit e Click on OK to complete the setup procedure HSPA WIFI ROUTER User Guide YML25WVR 12 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES For Mac OSX 10 6 e Click on the Apple menu and click on System Preferences e Click on the Network icon Personal M B B amp B Appearance Desktop amp Dock Expos amp International Security Spotlight Screen Saver Spaces Hardware Bluetooth CDs amp DVDs Displays Energy Keyboard amp Print amp Fax Sound Saver Mouse Internet amp Network EI I Q MobileMe Network QuickTime Sharing System A GQ D Accounts Date amp Time Parental Software Speech Startup Disk Time Machine Universal Controls Update Access e Set Location to Automatic e Inthe Configure IPv4 section choose Using DHCP Location Ethernet Connected Status Connected Configure IPv IP Address Subnet Mask Router DNS Server Search Domains TE Caret Uh cick tne ok to prevent further changes e Click on Apply YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 13 WEB CONFIGURATION HSPA WIFI ROUTER NETCOMM LIBERTY SERIES 3 Web Configurat
6. gt Account it optional gt Password fo ptionaly Authentication Auto C PAP CHAP gt Primary DNS RR toptional gt Secondary DNS optional gt Preferred Service Mode an Bands gt Connection Control Auto Reconnect always on gt Roaming I Enable Half Bridging I Enable _Save Undo Note The WAN fields may not be necessary for your 3G connection The information on this page will only be used when required by your 3G service provider Please contact your 3G provider to obtain this information if needed This is the default operation mode of the router and should be suitable for the majority of users The Access Point Name APN should be set by default If it is not or you require a different APN please contact Rogers Customer Care to obtain the correct APN to use OPTION APN DESCRIPTION Enter the APN for your 3G service This should default to fixed isp apn Pin Code Enter the Pin Code for your SIM card if required Dial Number This number is required to connect to your 3G service Unless advised otherwise by Rogers Customer Care this setting should not be changed Account The username provided by your 3G service provider to enable access to your 3G service Password The password provided by your 3G service provider to enable access to your 3G service Authentication Choose the appr
7. Allows modification of SIM card s PIN settings Restore Setting Load the settings of this device from a file d The page at http 192 168 1 1 says e upgrade ofthe device Reset to Default Reset this device to factory defaults Reboot Reboot this device Miscellaneous Allows configuration of Wake on LAN Miscellaneous You can configure Wake on LAN WOL from this page D ISTRATOR S M Stati YY Wizard Cal Advanced ogo S RSS IRCH BASIC SETTINGS KC FORWARDING RULES SECURITY SETTINGS ff ADVANCED SETTINGS ES Tooupox System In Miscellaneous Items E eege FX S Wake on LAN enables the router to start up a computer or device if the computer supports it when a WOL packet is detected on the network going to the client MAC you have entered HSPA WIFI ROUTER User Guide YML25WVR 46 www netcommlimited com APPENDICES NEICOMM 5 Appendix A WAN Failover The WAN failover feature of the 3G25W R is designed to provide a backup WAN connection in case your primary connection should fail To use this feature you will require both a regular WAN connection and a 3G WAN connection Please follow these steps to set up WAN failover on your 3G25W R e Ensure a primary 3G WAN connection is configured by following the steps outlined in the Network Setup section of the User Guide Set up a secondary non 3G WAN connection by following the steps outlined
8. Select Ethernet WAN or Wireless WAN WAN Type WAN connection type Click the WAN Type pull down menu to choose the appropriate connection type from the following options B Combo WAN Setting Setting gt Combo WAN Mode Failover z Remote Host for keep alive fwwww google com WAN Connection Lists Primary WAN 3G Secondary WAN Dynamic IP Address Add New Combo WAN mode Select Failover from the pull down menu to enable the automatic failover feature Select a high availability website in order to check if your WAN connection has dropped For example www google com Click Add New and select the appropriate secondary WAN connection method Click Save to save your WAN failover settings HSPA WIFI ROUTER User Guide 20 YML25WVR www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES 3G The default connection type ws BASIC SETTINGS E FORWARDING RULES SECURITY SETTINGS A ADVANCED SETTINGS e TOOLBOX Network Setup LAN Setup DHCP Server Rem Setting canon LAN IP Address kamen nei Nr Subnet Mask 255 255 2550 gt Ethernet Port 4 mode act as LAN port Internet Setup gt Combo WAN status Disable Setting gt WAN Interface Wireless WAN z gt WAN Type ac gt APN fixed isp apn optional PIN Code Mn feptionan Retype PIN CODE IT keptional Dialed Number boss
9. WAN Subnet Mask IT gt WAN Gateway TI gt Primary DNS l gt Secondary DNS IT NAT disable I Enable _ save Undo This utilises the Ethernet WAN port to provide a connection to the Internet with a static IP address assigned from your Internet Service Provider ISP Enter the WAN IP Address Subnet Mask Gateway and the Primary and Secondary DNS as supplied by your Internet Service Provider ISP NAT disable This option disables Network Address Translation for this connection type Click Save to complete the connection setup process Dynamic IP Address This utilises the Ethernet WAN port to provide a connection to the Internet with a dynamic IP address assigned from your Internet Service Provider ISP INISTRATOR Wa gt Logout we BASIC SETTINGS lt A FORWARDING RULES SECURITY SETTINGS Ar ADVANCED SETTINGS e TOOLBOX Network Setup 2 LAN Setup DHCP Server Rem Setting DU ad gt LAN IP Address frg2 168 14 Change Password gt Subnet Mask 255 255 255 0 Ethernet Port A mode act as LAN port z Internet Setup gt Combo WAN status Disable Setting gt WAN Interface Ethernet wan DI WAN Type Dynamic IP Address zl gt Host Name ln optionah ISP registered MAC Address cine Connection Control Auto Reconnect always on gt NAT disable I Enable Leave ua OPTION DESCRIPTION Host Name Set the hostname for your
10. WLAN Channel Auto Back Start gt Password gt Time gt LAN WAN gt WLAN gt Summary gt Finish net If you want to change the wireless network security settings you can do so on this page Change the settings as needed and click Next If you wish to use the default settings click Next B Setup Wizard Customise Wireless LAN settings if required EXIT Authentication Jwra Psks WPA2 PSK Encryption TKIP raes x gt Preshare Key PT e Confirm the setup information and click Apply Settings if everything is correct You can also click Back to go back and change any of the previously configured settings LEXIT u Setup Wizard Summary Please confirm the information below Authentication WIPA PSK WPA2 PSK Encryption TKIPIAES The router will then apply your configured settings LEXIT u Setup Wizard Apply settings Your settings are being applied Please wait 36 secon ds __ lt Bak Start gt Password gt Time gt LAN WAN gt WLAN gt Summary gt Finish Finish HSPA WIFI ROUTER User Guide YML25WVR 16 www netcommlimited com HSPA WIFI ROUTER Once completed your router is configured and ready to connect to the internet IP Address Click Finish to be taken to the Status page to confirm you are
11. Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference 2 this device must accept any interference including interference that may cause undesired operation of the device Son Fonctionnement est soumis aux deux conditions suivantes 1 Le mat riel ne peut tre source D interf nces et 2 Doit acceter toutes les interferences reques Y compris celles pouvant provoquer un fonctionnement ind sirable This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada This device has been designed to operate with the antennas listed below and having a maximum gain of 4 dB Antennas not included in this list or having a gain greater than 4 dB are strictly prohibited for use with this device The required antenna impedance is 50 ohms CANADIAN CLASS B STATEMENT This digital device does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference causing equipment standard entitled Digital Apparatus ICES 003 of the Department of Communications Cet appareil numerique respecte les limites de bruits radioelectriques applicable aux appareils numeriques de Classe B prescrities dans la norme sur le material brouilleur Apparelis Numeriques NMB 003 edictee par le minister des Communications MODIFICATION Any changes or modificatio
12. Enter the new SIM PIN to be used into the New PIN code and Confirm PIN code fields Click Save to change the SIM PIN code Restore Settings This page enables you to restore a previously saved backup of the 3G25W R s configuration WS Basic sertmcs 2 Forwaromic RULES SECURITY SETTINGS E ADVANCED SETTINGS 142 TOOLBOX B Restore Setting Config Filename Note Do not interrupt the process or power off the unit when itis being upgraded When the process is done successfully the unit will be restarted automatically Click the Browse button and navigate to the location you previously saved the configuration file Click the Restore button once you have selected the appropriate bin file to use HSPA WIFI ROUTER User Guide 44 YML25WVR www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Firmware Upgrade This page enables you to update the firmware on the 3G25W R VV Wizard Hm Advance ESCH Firmware Upgrade _Browse Current firmware version is R0 01j0 Note Do not interrupt the process or power off the unit when itis being upgraded When the process is done successfully the unit will be restarted automatically Click the Browse button and navigate to the location you saved the firmware update file You can then upgrade the routers firmware by clicking the Upgrade button Backup Setting You can backup y
13. Guide www netcommlimited com 29 NEICOMM Wireless Client List ADMINISTRATOR S MAIN MEN Status VA Wizard Cail Advanced gt Logout S 5 A IRC Basic sertmcs lt Forwarpic RULES SECURITY SETTINGS A ADVANCED SETTINGS VS TOOLBOX Change Password The list of currently connected wireless devices is shown here Change Password Change Password Old Password New Password ees fN Reconfirm This page allows you to change the 3G25W R web configuration password Please type in the old password the factory default password is admin and then type in the new password Type the same new password in the Reconfirm field and click Save Forwarding Rules The Forwarding Rules page allows you to configure the port forwarding management on the router Click on any of the menu items on the left to access the respective settings page Ig Basic serrmes 2 FORWARDING RULES SECURITY SETTINGS ON ADVANCED SETTINGS 40 TOOLBOX B FORWARDING RULES Virtual Server Allows others to access WAWY FTP and other services on your LAN Special Application Allows configuration of special applications to operate correctly behind NAT on the router Miscellaneous Allows designation of a DMZ Host and configuration of UPnP Note Forwarding rules are a necessary feature as by default NAT Network Address Translation will automatically block incoming traffic from the Interne
14. SERIES Security Setting The Security Setting page allows you to configure the security management on the router such as Packet filters and MAC Control Click on any of the menu items on the left to access the respective setting page B Outbound Filtering Modify Packet Filters Item Status Outbound Filtering Disable URL Blocking Local Client Only Allow Remote Host Working Time MAC Control B Inbound Filtering Modify Miscellaneous Rem Status Inbound Filtering Disable Remote Host Deny remote access from host Working Time Domain Filtering Modify Status Domain Filtering Disabled Access Domain All other Domains Description Outbound Filtering The currently configured outbound filtering rules Inbound Filtering The currently configured inbound filtering rules Domain Filtering The currently configured domain filtering rules Packet Filters The Packet Filter enables you to control what packets are allowed to pass through the router There are two types of packet filter Outbound Packet Filter which applies to all outbound packets and the Inbound Packet Filter which only applies to packets that are destined for a Virtual Server or DMZ host only For further instructions on setting up MAC Level Filtering please refer to the MAC Control section below B Outbound Packet Filtering Rem Setting gt Outbound Packet
15. connection optional Refer to your ISP for more information ISP register MAC address You can change the WAN port MAC address if needed to clone your 3G modem optional Refer to your ISP for more information Connection Control There are 3 modes to select from Connect on demand The 3G25W R will connect to the internet when a client sends outgoing packets Auto Reconnect Always on The 3G25W R will automatically reconnect to the internet until the connection is manually disconnected Manually The 3G25W R will not connect to the internet until someone clicks the connect button in the Status page NAT disable This option disables Network Address Translation for this connection type HSPA WIFI ROUTER User Guide YML25WVR 22 www netcommlimited com PPP over Ethernet OPTION PPPoE Account HSPA WIFI ROUTER NETCOMM LIBERTY SERIES ADMINISTRATOR S MAIN MENU a WW sasic sertmes lt 2 rorwaromic RULES amp security spe Qf apvancen settincs V TooLBox KS Network Setup LAN Setup DHCP Server Item Setting SW oje LAN LANIP Address ars Se Subnet Mask 255 255 255 0 Ethernet Port 4 mode Actas LAN port B Internet Setup Combo WAN status Disable Setting WAN Interface Ethemet wan gt WAN Type PPP overEthemet PPPoE Account gt PPPoE Password Primary DNS Secondary DNS
16. file Reset to Default Reset this device to factory defaults Reboot Reboot this device Miscellaneous Allows configuration of Wake on LAN System Info From this page you can view the current System log entries for the router Status Nizard Call Advance gf Basic serrmes lt 22 FORWARDING RULES SECURITY SETTINGS ff ADVANCED SETTINGS ons System Infomation Page 1 2 Log Number 18 You can also select to save a copy of the syslog data to your computer by clicking the Download button or clear the current syslog data by clicking the Clear Logs button YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 43 NEICOMM PIN Control This page allows you to enable or disable SIM PIN security as well as change the current SIM PIN or store the current SIM PIN to enable the router to automatically utilise the PIN when required V BASIC SETTINGS lt 2 FORWARDING RULES SECURITY SETTINGS ff ADVANCED SETTINGS ty TOOLBOX Li PIN Code Control Rem Setting gt SIM PIN Security Disabled Enabled gt Input SIM PIN code gt Confirm PIN code L Save Undo Change PIN Code To change the PIN currently used on the inserted SIM Click Change PIN Code u PIN CODE Change function gt Old PIN code New PIN code gt Confirm PIN code e Enter the current SIM PIN into the Old PIN code field e
17. in the Network Setup section of the User Guide e Open your web browser e g Internet Explorer Firefox Safari and navigate to http 192 168 1 1 At the login screen type in admin without quotes in the System Password field Then click on Login e Navigate to the Network Setup page Click the Combo WAN status button and select Failover from the pull down menu and enter a public IP address for example www google com into the Remote Host for keep alive box The 3G25W R will periodically check that it can connect to this address to determine if the WAN connection is still running You will also need to click Add New and select the appropriate secondary WAN type e Inthe Network Setup page make sure that Ethernet Port 4 mode is set to Act as WAN port and that the selected WAN Type is your primary 3G WAN connection and click Save You are now ready to use the internet connection as normal e When your primary 3G WAN connection fails the 3G25W R will automatically failover to the secondary non 3G WAN connection Please allow up to 2 minutes for this change to occur When your primary 3G WAN connection reconnects the 3G25W R will automatically revert to this connection Please allow up to 2 minutes for this change to occur e To confirm that the process in Step 9 is complete refresh the status page of the web interface after 1 minute HSPA WIFI ROUTER User Guide YML25WVR 48 www netcommlimited
18. or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions You must cause the modified files to carry prominent notices stating t
19. package contains the following items e Rocket Hub 3G25W R Internet only e Quick Start Guide e User Guide on CD e Power Supply Unit e Ethernet Cable e SIM card e Wireless Security Card e Attachable 3G antenna recommended If any of the above items are damaged or missing please contact your dealer immediately YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 5 NEILL Minimum System Requirements Before continuing with the installation of your 3G25W R Wireless Router please confirm that you comply with the minimum system requirements e Active SIM card for 3G Broadband access if you want to use a 3G Broadband service Note Active SIM card is included in the box e Computer with Windows Macintosh or Linux based operating systems with a working Ethernet adapter with TCP IP Protocol installed e Internet Explorer version 6 0 and above Mozilla Firefox version 3 0 and above or Safari 5 and above Wireless Computer System Requirements e Computer with a working 802 11b 802 119 802 11n wireless adapter LED indicators DESCRIPTION 3G Signal Strength HIGH On High signal strength present On Medium signal strength present a On Low signal strength present 5 VERSIS WHOIS S On 3G service detected Flashing Data going via the 3G connection Off 2G service detected INTERNET On Active Internet connection On The wireless function is enabled Flashin
20. the top of the window At the login screen type admin without quotes in the System Password field Then click on Login Note admin is the default login password for the unit Click on the Advanced link at the top of the page After that click on any of the top menu items to access the respective setting pages ADMINISTRATOR S MAIN MEN Status 7 Wizard CA Advanced ogo L Basic sertmcs lt 22 rorwaromc RULES security serres Sf apvancen serrmcs gs TOOLBOX Basic Settings The Basic Setting page allows you to configure a number of basic settings on the unit This section deals with these features Click on any links on the menu on the left to configure the respective settings Network Setup Configure LAN IP and select WAN type DHCP Server The settings include Host IP Subnet Mask Gateway DNS and WINS configurations Wireless LAN Allows the advanced configuration of Wireless LAN settings Change Password Allows you to change the administration password YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 19 NEILL Network Setup This Page allows you to change the LAN Local Area Network settings on your 3G25W R Wireless router and the WAN Wide Area Network connection LAN IP Address the local IP address of the 3G25W R B LAN Setup Setting gt LAN IP Address fi 92 168 1 1 gt Subnet Mask 255 255 255 0 gt Ethern
21. under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligat
22. Filtering I Enabled Allow all packets to pass except those matching the following rules O Stop all packets from passing except those matching the following rules ID Source IP Destination IP Ports Enable Use rule 1 i 0 Always e ee Sg 0 Always x SEF Save TT ar Inbound Filter YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 33 NEILL Outbound Filter To enable an Outbound Filter tick the Enable tick box at the top of the page There are two types of filtering policies 1 Allow all data traffic to pass except those that match the specified rules 2 Deny all data traffic to pass except those that match the specified rules You can specify up to 48 filtering rules for each direction Inbound or Outbound For each rule you will need to define the following e Source IP address Source port e Destination IP address e Destination port Protocol TCP or UDP or both e Use Schedule Rule For source or destination IP address you can define a single IP address 192 168 1 1 or a range of IP addresses 192 168 1 100 192 168 1 200 Leaving these fields empty implies all IP addresses are matched For source or destination port you can also define a single port 80 or a range of ports 1000 1999 Use the prefix T or U to specify either the TCP or UDP protocol e g T80 U53 U2000 2999 No prefix indicates both TCP and UDP are defined Leaving this field empty i
23. HSPA WIFI ROUTER NETCOMM LIBERTY SERIES NEILL NEICOMM Preface The purpose of this manual is to provide you with detailed information on the installation operation and application of your HSPA WiFi Router Important Notice and Safety Precaution Before servicing or disassembling this equipment always disconnect all power or telephone lines from the device e Use an appropriate power supply preferably the supplied power adapter with an output of DC 12V 1 5A e Do not operate the device near flammable gas or fumes Turn off the device when you are near a petrol station fuel depot or chemical plant depot Operation of such equipment in potentially explosive atmospheres can represent a safety hazard e The device and antenna shall be used only with a minimum of 20cm from human body e The operation of this device may affect medical electronic devices such as hearing aids and pacemakers e The antennas must be connected to this product prior to connecting the telephone cord e The telephone cord must be disconnected prior to disconnecting the antennas HSPA WIFI ROUTER User Guide YML25WVR 2 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES TABLE OF CONTENTS EENEG 5 een EEN 5 FC SN UM a he doen ey nee ar eo we a a A E ee de a Sgr pe Old 5 Minimin yoten SC WI E 6 FERNE OR een ae ern 6 BSH Fe HO BT e T 2 Connecting your 3G25W R WiFi Router u2222 20002200000000n000nnnunnnnnnnnnnnnnunnn
24. I ROUTER NETCOMM LIBERTY SERIES Restoring Factory Defaults This feature will reset the Router to its factory default configuration Occasions may present themselves where you need to restore the factory default settings on your router Typical situations are e You have lost your password and unable to login to the router e You have purchased the router from someone else and need to reconfigure the device e You are asked to perform a factory reset by a member of the Support Staff In order to restore your router to its factory default settings please follow these steps Ensure that the router is powered on for at least 20 seconds e Use a paper clip or a pencil tip to depress the reset button for ten seconds and release At this point the reset is in progress Do not power off the unit After the router reboots the default settings are now restored This entire process takes several minutes to complete Once you have reset the router to its default settings you will be able to access the device s web configuration using the address http 192 168 1 1 with password admin Default Settings LAN Management Static IP Address 192 168 1 x Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 WAN Internet WAN mode DHCP Wireless SSID refer to the wireless security card insert Security WPA2 PSK Wireless Security Key refer to the wireless security card insert Router Access Password admin YML25WVR H
25. P Version y Oyz gt WAN Access IP Address Ir Save Undo Description Enable SNMP You must check Local Remote or both to enable SNMP function If Local is checked this device will only respond to requests from LAN connected hosts If Remote is checked this device will respond to requests from the WAN connection Get Community Sets the community string your device will respond to for Read Only access Set Community Sets the community string your device will respond to for Read Write access IP 1 IP 2 IP 3 IP 4 Input your SNMP Management host IP here You will need to configure the address where the device should send SNMP Trap messages to SNMP Version Please select proper SNMP Version that your SNMP Management software supports WAN Access IP Address You can limit remote access to a specific IP address by entering it here Note If Remote access is enabled the default setting of 0 0 0 0 means any IP can obtain SNMP protocol Information Click on Save to store your setting or Undo to discard your changes HSPA WIFI ROUTER User Guide YML25WVR 40 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Routing Routing tables allow you to determine which physical interface address to use for outgoing IP data If you have more than one router and subnet you will need to configure the routing table to allow packets to find the proper routing path and allow d
26. R power adaptor is connected to the device and plugged in to an appropriate power source Use only the supplied power adaptor Check that the 3G25W R and the power source are both turned on and device is receiving sufficient power Turn the 3G25W R off and on If the error persists you may have a hardware problem In this case you should contact your vendor Web Configuration cannot access the web configuration PS CORRECTIVE ACTION Correct Action Make sure you are using the correct IP address of the 3G25W You can check the IP address of the device from the Network Setup configuration page Check that you have enabled remote administration access If you have configured an inbound packet filter ensure your computer s IP address matches it Your computer s and the 3G25W s IP addresses must be on the same subnet for LAN access You can check the subnet in use by the router on the Network Setup page If you have changed the devices IP address then enter the new one as the URL you enter into the address bar of your web browser The web configuration does not display properly Correct Action Delete the temporary web files and log in again In Internet Explorer click Tools Internet Options and then click the Delete Files button When a Delete Files window displays select Delete all offline content and click OK Steps may vary depending on the version of your Internet browser
27. SPA WIFI ROUTER User Guide www netcommlimited com 7 CONNECTING YOUR 3G25W R WIFI ROUTER HSPA WIFI ROUTER NETCOMM LIBERTY SERIES 2 Connecting your 3G25W R WiFi Router Step 1 Attach the antenna 1 Remove the antenna from its plastic wrapper 2 Screw the antenna in a clockwise direction to the back panel of the unit 3 Once secured position the antenna upward at its connecting joint This will ensure optimal reception 4 Ensure the Power Switch is off DO NOT connect the 3G25W R to power before performing the installation steps below Step 2 Insert the SIM into the 3G25W R Step 3 Insert the Ethernet cable into the LAN Port Insert the Ethernet cable into LAN port on the back panel of the 3G25W R and into an available Ethernet port on the network adapter in the computer you will use to configure the 3G25W R Step 4 Power on the 3G25W R 1 Connect the power adapter to the DC jack on the back panel of your 3G25W R 2 Then plug the other end of the power adapter into a wall outlet or power strip 3 Turn on the Power Switch Step 5 Complete the setup 1 All LEDs will flash to indicate power has been applied 2 The LEDs will flash ON and OFF as the 3G25W R performs its start up initialisation and Internet connection processes This will take a few minutes YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 9 NEILL Setting up your computer Having physically connected your 3G25W R the
28. Select a NTP time server to obtain the current UTC time from Sync with Time Server Select if you want to set Date and Time by NTP Protocol Sync with my PC Select if you want to set Date and Time using your computers Date and Time Click Save to save the settings or Undo to cancel YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 41 NEILL Scheduling You can use scheduling to enable or disable a service at a specific time or on a specific day Select Enable and then click the New Add button Status Schedule Rules System Log Item Setting _ Dynamic DUS Schedule TD Enabled QoS Rule Rule Name SUMP Routing System Time Scheduling Select a name for the rule and enter the details such as the day start time or end time and click Save In the example below the rule is called Work Hours and it is only active between 08 00 and 17 30 Status Schedule Rule Setting System Log Item Setting Dynamic DNS gt Name of Rule 1 is Res Policy Inactivate FJexcept the selected days and hours below Week Day Start Time hh mm End Time hh mm ol l olal ol 58 III m You are then able to select the scheduling rule name specified from the Packet Filter configuration section to perform the configur
29. ations not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference and this device must accept any interference received including interference that may cause undesired operation Important Note FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body The transmitter must not be co located or operating in conjunction with any other antenna or transmitter HSPA WIFI ROUTER User Guide YML25WVR 52 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Industry Canada RF exposure requirements In order to ensure compliance with the RF exposure requirements specified in Health Canada Safety Code 6 this device may be operated while held in the hand but not when held close to the body carried in a pocket or holster or similar configuration that allows close proximity to the body NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT This device complies with Industry
30. com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES 6 Appendix B Establishing your Wireless Connection Windows XP Service Pack 2 1 Open the Network Connections control panel Start gt Control Panel gt Network Connections 2 Right click on your Wireless Network Connection and select View Available Wireless Networks 3 Select the wireless network as shown on your Wireless Security card and click Connect 4 Enter the network key as shown on your Wireless Security card 5 The connection will show Connected Windows Vista 1 Open the Network and Sharing Center Start gt Control Panel gt Network and Sharing center 2 Click on Connect to a network 3 Choose Connect to the Internet and click on Next 4 Select the wireless network as shown on your Wireless Security card and click Connect 5 Enter the network key as shown on your Wireless Security card and click Next 6 Select the appropriate location This will affect the firewall settings on the computer 7 Click on both Save this network and Start this connection automatically and click Next Windows 7 1 Open the Network and Sharing Center Start gt Control Panel gt Network and Sharing center 2 Click on Change Adapter settings on the left hand side 3 Right click on Wireless Network Connection and select Connect Disconnect 4 Select the wireless network as shown on your Wireless Security card and cl
31. connected Setup Wizard Apply settings EXIT Configuration is Complete Ifyou have changed the Rocket Hub s LAN IP address please reconneci t manual lly to the new address lt Back Start gt Password gt Time gt LAN WAN gt WLAN gt Summary gt Finish Finish u System Status Item Status Sidenote IP Address 120 20 154 217 Subnet Mask 255 255 255 255 Gateway 120 20 154 217 Domain Name Server 203 21 112 40 202 81 67 132 Conneci tion Time 00 01 53 B Wireless Modem Information Item Status Sidenote et Signal Strength alll 59dBm Network Name Rogers Wireless Technology Status HSPA SIM Status SIM Inserted Wireless Status Item WLAN Status Sidenote Wireless mode Enabled B G N Mixed SSID ROGERS6D8B Channel Auto Security WPA PSK J WPA2 PSK TKIPIAES u Statistics Information WAN Statistics Inbound Outbound Octets 752 184 Unicast packets 3 2 Multicast packets D 0 View Log Clients List NAT Status 3G Statistics Check Data Usage Device Time Thu 31 Dec 2009 19 05 05 0500 Description The current WAN IP address of the router NETCOMM LIBERTY SERIES Subnet Mask The current subnet mask in use by the router Gateway The gateway in use by the router to access the internet Domain Name Server The Domain name serve
32. devices Rather than being restricted to certain USB modems the 3G25W R allows the user to simply insert an active SIM and utilise 3G Mobile Broadband for internet connectivity The 3G25W R includes advanced security features such as VPN pass through a full complement of wireless security options and a built in firewall 1 Maximum wireless signal rate and coverage values are derived from IEEE Standard 802 11g and 802 11n Draft 2 0 specifications Actual wireless soeed and coverage are dependent on network and environmental conditions included but not limited to volume of network traffic building materials and construction layout 3G25W R Features e Powerful wireless router with support for 3G Mobile Broadband e Creates instant Wireless hotspots to share the Internet connection of a 3G or DSL Cable connection e Supports Wireless N standard with data speeds up to 300Mbps e One WAN port for alternate wired Internet connection DSL Cable Satellite via Ethernet e Four LAN ports to connect wired devices like PCs or gaming consoles Ensures connectivity and business continuity with auto Internet failover from 3G Mobile Broadband to the Ethernet based WAN port Easy Wi Fi Protected Setup WPS by the single touch of a button to establish a secure wireless connection e Full Wireless security WEP WPA WPA2 Browser based interface for configuration and management OS independent and easy to use Package Contents Your 3G25W R WiFi Router
33. ed IP address can perform remote administration Note If the specified IP address is 0 0 0 0 any host can connect to the router to perform administration tasks You can also use a subnet mask nn to specify a group of trusted IP addresses for example 10 1 2 0 24 When Remote Administration is enabled the web server port will be shifted to 80 You can also change the web server port ITEM Description Discard PING from WAN side When this feature is enabled your router will not respond to ping requests from remote hosts DoS Attack Detection When this feature is enabled the router will detect and log where the DoS attack comes from on the Internet Currently the router can detect the following and more DoS attack types SYN Attack WinNuke Port Scan Ping of Death Land Attack Click Save to save the settings or Undo to cancel YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 37 MEILOM Advanced Setting The Advanced Setting page allows you to configure the advanced settings on the router such as the System log Dynamic DNS and SNMP options Click on any of the menu items on the left to configure the access the respective setting page WS sasic serrmcs lt 2 FORWARDING RULES SECURITY SETTINGS Cf ADVANCED SETTINGS Ey TooLBox B System Time Modify Item Status System Time Thu 31 Dec 2009 19 38 50 0500 B Dynamic DNS Modify DDNS Disabled P
34. ed filtering at the scheduled time as per the screenshot below gt Name of Rule 1 This example would prevent any access to the IP address 66 102 11 104 from any device connected to the router 7 days a week only between the hours of 08 00 and 17 30 Outbound Packet Filtering gt Outbound Packet Filtering M Enabled Allow all packets to pass except those matching the following rules Stop all packets from passing except those matching the following rules m emnon ra re CC TESS TEES TESS Di m mm TESS TEES TESS TES TESS TEE Save Undo Inbound Filter MAC Level Click Save to save the settings or Undo to cancel HSPA WIFI ROUTER User Guide YML25WVR 42 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Tool Box The Tool Box page consists of various tools for the unit Click on any of the menu items on the left to access the respective page ADMINISTRATOR S MA M Status d Wizard A Advanced ogo IW Bas c sernmcs lt 2 FORWARDING RULES SECURITY SETTINGS HI ADVANCED SETTINGS 13 TOOLBO H u TOOLBOX System Info View the system logs PIN Control Allows modification of SIM card s PIN settings Restore Setting Load the settings of this device from a file Firmware Upgrade This page allows the administrator to perform a software upgrade ofthe device Backup Setting Save the settings ofthis device to a
35. el HSPA WIFI ROUTER User Guide YML25WVR 28 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES WDS Wireless Distribution System gd TOOLBOX PC WDS allows you to connect to other Wireless Access Points and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement Enter the MAC address of the other wireless Access Points taking part in the WDS network and then click Save WPS Setup ADMINISTRATOR s MAIN MEN M Status Ka Wizard AN Advanced gt Logout z pe IRC Basic sernmes lt FORWARDING RULES SECURITY SETTINGS H ADVANCED SETTINGS gay TOOLBOX B Wi Fi Protected Setup mene manana ere iw gt Config Method Wi Fi Protected Setup WPS offers safe and easy way to connect wirelessly Simply push the WPS button on the router and then press the WPS on your wireless device within 2 minutes and the WLAN connection should be completed automatically OPTION DESCRIPTION AP PIN The current PIN used to connect e Click Generate New PIN to force the router to create a new PIN Config Mode Set the router to be either the Registrar or Enrollee Config Status You can discard the current WPS configuration by clicking Release Config Method Set the WPS configuration method to either Push Button or PIN code These settings should not need to be changed YML25WVR HSPA WIFI ROUTER User
36. et Port 4 mode Actas LAN port z 9 Internet Setup gt Combo WAN status Disable Setting gt WAN Interface Wireless WAN gt WAN Type 3c gt APN Fuedem apn optional gt PIN Code optional gt Retype PIN CODE optional gt Dialed Number W Account optional Password optional gt Authentication auto pap CHAP gt Primary DNS optional gt Secondary DNS optional gt Preferred Service Mode alr Bands gt Connection Control Auto Reconnect always on gt Roaming I Enable Half Bridging I Enable The computers on your network must use this IP address as their Default Gateway You can change it if necessary Subnet Mask Enter 255 255 255 0 in the subnet field Ethernet Port Mode If using the WAN failover feature set this to Act as WAN port otherwise leave this set to Act as LAN port Note When utilising the WAN failover feature ensure the Ethernet Port Mode is set to Act as WAN port failure to do so may result in the router being uncontactable and a power cycle will be required to restore normal functionality Combo WAN status Configure the WAN failover feature By default your primary connection is 3G Please select the appropriate secondary connection method from this page WAN Interface
37. formation Assigned IP address Enter the IP address assigned to your service This is usually left blank Maximum Transmission Unit MTU The default MTU value is 0 auto It is set automatically when you connect NAT disable This option disables Network Address Translation for this connection type YML25WVR www netcommlimited com Half Bridging This option enables Half Bridging for this connection type Half bridging is utilised to enable a single computer to be Live on the internet This means any services such as internet gaming which would usually require port forwarding for are able to be connected to directly HSPA WIFI ROUTER User Guide 23 NEILL PPTP TOR s MA WW Basic sertmes lt 2 rorwaroic RULES SECURITY SETTINGS ADVANCED serres 4 TOOLBOX Network Setup DHCP Server Wireless LAN Change Password M statu Ve i A Logo LAN Setup Rem Setting AC Eeszeezeen Actas LAN port zl gt LAN IP Address gt Subnet Mask Ethernet Port 4 mode Li Internet Setup Disable Setting Ethernet WAN i gt Combo WAN status WAN Interface gt WAN Type IP Mode gt My IP Address gt My Subnet Mask Gateway IP Server IP Address Name PPTP Account gt PPTP Password E ee BEER Connection ID optional seconds gt Max
38. g Data going via the wireless network LAN 4 WAN On A Device is connected Flashing Data going via Ethernet port 4 On A Device is connected Flashing Data going via Ethernet port 3 On A Device is connected Flashing Data going via Ethernet port 2 On A Device is connected Flashing Data going via Ethernet port 1 On Power is being supplied to the router Some SIM cards are locked and require a code to be entered before the router is able to use the SIM This can mean the SIM is PIN locked to prevent its use in another device PUK locked after entering an incorrect PIN number or alternatively the router itself can be Network MEP locked In the event your SIM is PIN PUK or the router is network locked the following lights LEDs will illuminate on your router in the following orders PIN Locked The 3G Mode INTERNET and 3G Signal Strength LEDs will illuminate in an ascending order to indicate a SIM PIN lock PUK Locked The 3G Signal Strength and 3G Mode INTERNET LEDs will illuminate in an alternating pattern to indicate a PUK lock Network Locked The 3G Mode INTERNET and 3G Signal Strength LEDs will flash on and off to indicate a network lock Please refer to the information you received with your SIM to obtain your PIN and PUK codes You will need to contact Rogers Customer Care to obtain the Network unlock code HSPA WIFI ROUTER User Guide YML25WVR 6 www netcommlimited com HSPA WIF
39. hat you changed the files and the date of any change You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each a
40. he clients current IP address is always assigned to it DHCP Fixed Mapping DHCP Fixed Mapping allows you to reserve a specific IP address for a specific device The DHCP Server will reserve a specific IP for a device based on that devices unique MAC address You can enter a new Fixed Mapping by entering the MAC address of the device and the IP address you wish to allocate to it Click on the Enable checkbox to activate the DHCP fixed mapping entry YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 27 NEILL Wireless B Wireless LAN Settings Wireless LAN gt Wireless LAN Access Paint Enabled Disabled Change Password gt WLAN Network Name SSID ROGERS6D85 gt SSID Broadcast Enabled Disabled WLAN Channel fo gt Wireless Mode BIG N mixed D gt Authentication WPA PSK WPA2 PSK DI gt Encryption TKIP AES D gt Preshare Key 1 2cfefeea Save Undo WDS Setting WPS Setup Wireless Client List The Wireless LAN settings page allows you to configure the wireless network features of the router OPTION DESCRIPTION WLAN Network Name SSID Network ID is used for identifying the Wireless LAN WLAN Client stations can roam freely over this product and other Access Points that have the same Network ID Please refer to the included Wireless security card insert for your default SSID SSID Broadcast The router will broadcast the SSID so
41. ick Connect 5 Enter the network key as shown on your Wireless Security card 6 You may then see a window that asks you to Select a location for the wireless network Please select the Home location 7 You may then see a window prompting you to setup a HomeGroup Click Cancel on this 8 You can verify your wireless connection by clicking the Wireless Signal indicator in your system tray 9 After clicking on this you should see an entry matching the SSID of your 3G25W R with Connected next to it Mac OSX 10 6 1 Click on the Airport icon on the top right menu 2 Select the wireless network as shown on your Wireless Security card 3 On the new window select Show Password type in the network key in the Password field and then click on OK 4 Tocheck the connection click on the Airport icon and there should be a tick on the wireless network name Notes For other operating system Windows 98SE Windows ME Windows 2000 etc or if you use a wireless adaptor utility to configure your wireless connection please consult the wireless adapter documentation for additional information YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 49 NEILOMM 7 Appendix C Troubleshooting Using the indicator lights LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes Power LED The Power LED does not light up Correct Action Make sure that the 3G25W
42. ifferent subnets to communicate with each other Routing Table tem Disabled RIPv1 RIPv2 Disabled Enabled OR pop 1 za p rm Sea Cno Save Undo These settings are used to setup the static and dynamic routing features of the 3G25W Description Dynamic Routing Routing Information Protocol RIP will exchange information about different host destinations for working out routes throughout the network Please only select RIPv2 if you have a different subnet in your network Otherwise please select RIPv1 Static Routing For static routing you can specify up to 8 routing rules You need to enter the destination IP address subnet mask gateway hop for each routing rule and then enable the rule by clicking the Enabled checkbox Click on Save to store your setting or Undo to discard your changes System Time This page allows you to change the System time setting on the 3G25W R gt Time Zone GMT 05 00 Eastern Time US amp Canada gt Auto Synchronization M Enabled Time Server RFC 868 O netcomm pool ntp org DI Save Undo Sync Result E 2 a DO Sync with Time Server Syne with my PC Tuesday February 01 2011 12 30 23 Time Zone Select the time zone where this device is located Description Auto Synchronization Select the Enable checkbox to enable this function Time Server
43. imum Idle Time 600 Auto Reconnect always on gt MTU fo O is auto I Enable Save Undo gt Connection Control gt Half Bridging This utilises the Ethernet WAN port to provide a PPTP Virtual Private Network VPN connection to a PPTP server Please verify your connection type and select the appropriate IP Mode Static IP Address or Dynamic IP Address OPTION Static IP Address DESCRIPTION Enter the IP address information provided to you by your service provider My IP Address My Subnet Mask and WAN Gateway IP PPTP provider The IP address subnet mask and Gateway IP address supplied to you by your Static IP and Dynamic IP Address connection types Server IP Address Name the IP address or URL of the PPTP server PPTP Account and Password don t want to change the password leave it empty The username and password supplied to you by your PPTP provider If you Connection ID Enter your connection ID if required Maximum Idle Time The amount of inactivity on the internet connection before it is disconnected Set it to zero or enable Auto reconnect to disable this feature Connection Control There are 3 modes to select from Connect on demand packets The 3G25W R will connect to the internet when a client sends outgoing Auto Reconnect Always on The 3G25W R will automatically reconnect to the internet until the con
44. ing for Microsoft Networks M JE QoS Packet Scheduler IR e Check Obtain an IP address automatically and Obtain DNS server address automatically then click on OK to continue e Click Show icon in notification area when connected then click on OK to complete the setup procedure HSPA WIFI ROUTER User Guide YML25WVR 10 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES For Windows Vista 32 64 e Click on Start gt Control Panel gt Network and Sharing Center SIE rei ire f om i E d je i ng fer HS 5 jie fim fies 10 i e Inthe Manage network connections on the left hand side of the window click on Manage network connections to continue Single RIGHT click on Local Area connection then click Properties gt Local Area Connection e Network Disable Marvell Yukon 88E8072 Status Diagnose Bridge Connections Create Shortcut Delete e The screen will display the information User Account Control Click Continue to continue e Double click on Internet Protocol Version 4 TCP IPv4 I Local Area Connection Properties WN Connect using CA Marvell Yukon 88E8072 PCI E Gigabit Ethemet Controller This connection uses the following items OK Client for Microsoft Networks M 3005 Packet Scheduler M Bt and Printer Sharing for Microsoft Networks M A Intemet Prot
45. ion Wizard Having setup your computer the next step is to establish a connection to the internet Please follow the steps below to configure your 3G25W R Wireless router via the web configuration wizard Open your web browser e g Internet Explorer Firefox Safari and type http 192 168 1 1 into the address bar at the top of the window At the login screen type admin without quotes in the System Password field Then click on Login System Password I default admin Login Note admin is the default login password for the unit e Click on Wizard and then on Enter msn arte sae ma me Etre Please select to follow the easy setup wizard or to skip to the advanced setup Wizard C Advanced Setup This page shows you the steps needed to configure your 3G25W R unit e The Setup Wizard will guide you step by step through basic device configuration gt Step 1 Setup Login Password gt Step 2 Setup Time Zone Step 3 WAN Setup gt Step 4 Wireless Setup gt Step 5 Summary Step 6 Finish Si gt Password gt Time gt LAN WAN gt WLAN gt Summary gt Finish e Click Next to continue Ifyou want to change the system password enter the current system password into the Old Password field and then enter the new password into both the New Password and Reconfirm fields and then click Next If you d
46. ions then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who place
47. lf Bridging I Enable _save _undo This utilises the Ethernet WAN port to provide a L2TP Virtual Private Network VPN connection to a L2TP server Please verify your connection type and select the appropriate IP Mode Static IP Address or Dynamic IP Address Static IP Address Enter the IP address information provided to you by your service provider OPTION DESCRIPTION IP Address Subnet Mask and WAN Gateway IP The IP address subnet mask and Gateway IP address supplied to you by your L2TP provider Static IP and Dynamic IP Address connection types Server IP Address Name the IP address or URL of the L2TP server L2TP Account and Password The username and password supplied to you by your L2TP provider If you don t want to change the password leave it empty Maximum Idle Time The amount of inactivity on the internet connection before it is disconnected Set it to zero or enable Auto reconnect to disable this feature Connection Control There are 3 modes to select from Connect on demand The 3G25W R will connect to the internet when a client sends outgoing packets Auto Reconnect Always on The 3G25W R will automatically reconnect to the internet until the connection is manually disconnected Manually The 3G25W R will not connect to the internet until someone clicks the connect button in the Status page Maximum Transmission Unit MTU The defa
48. mplies all ports are matched The Packet Filter also works with Scheduling Rules and gives you more flexibility on Access control For further instructions on scheduling rules please refer to the Scheduling section later in this guide Click Save to save the settings or Undo to cancel Inbound Filter To access the Inbound Packet Filter page click on the Inbound Filter button on the bottom of the Outbound Filter page All the settings on this page are the same as those for the Outbound Filter allow all packets to pass except thase matching the following rules Le Stop all packets from passing exceptthose matching the following rules Save Undo Outbound Filter MAC Level Click Save to save the settings or Undo to cancel HSPA WIFI ROUTER User Guide YML25WVR 34 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Domain Filters Domain Filters enable you to prevent users from accessing specific domain addresses URL Blocking gt Log DNS Query nal MAC Control gt Privileged IP Addresses Range i Miscellaneous abled 1 Il im Drop D Log m 2 ln I Drop I Log mj 3 TH T Drop Log m 4 L F Drop F Log mi 5 Me F Drop Log D 6 TI T Drop I Log O 7 LO T Drop Log m 8 IT T Drop F Log m 9 ln I Drop C Log D 10 all others F Drop Log _Save undo T
49. nd every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if yo
50. nection is manually disconnected Manually The 3G25W R will not connect to the internet until someone clicks the connect button in the Status page Maximum Transmission Unit MTU The default MTU value is O auto It is set automatically when you connect Half Bridging This option enables Half Bridging for this connection type Half bridging is utilised to enable a single computer to be Live on the internet This means any services such as internet gaming which would usually require port forwarding for are able to be connected to directly HSPA WIFI ROUTER User Guide YML25WVR 24 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES L2TP WS Basic seTTNGS lt 2 FORWARDING RULES SECURITY SETTINGS fi ADVANCED SETTIIGS e TOOLBOX Network Setup DHCP Server Wireless LAN gt LAN IP Address fi 92 168 1 1 Subnet Mask 255 255 255 0 gt Ethernet Port 4 mode act as LAN port z Internet Setup Change Password Disable setting Ethernet WAN L2TP H Dynamic IP Address zl gt Combo WAN status gt WAN Interface gt WAN Type gt IP Mode gt IP Address gt Subnet Mask gt WAN Gateway IP Server IP Address Name gt L2TP Account IT My gt L2TP Password IT M gt Maximum Idle Time 600 seconds Connection Control Auto Reconnect always on x MTU 0 is auto Ha
51. next step is to configure the router to establish a broadband connection Depending on your computers current settings you may first need to reconfigure the TCP IP Network Settings to access your Wireless Router Follow the appropriate instructions for your operating system For Windows 2000 XP e Click on Start gt Control Panel in Classic View In the Control Panel double click on Network Connections to continue Control Panel CEE Kaze m Ea a ge E Favorites e D BEER me IL gt X Wl O ae Address D Control Panel S Bio D D Accessibility Add Hardware Add or Administrative Automatic Date and Time Display Folder Options Fonts Game Options Remov Tools Updates Controllers Ge aa W RM e L Internet Java Keyboard Mail Mouse N TE Network Setup NVIDIA NVIDIA nview Phone and Co IMS Wizard Control Panel Desktop M Modem o ode 22 9 e Power Options Printers and QuickTime RealtekHD Regional and Scanners and Scheduled Security Sounds and Speech Faxes Sound Eff Language Cameras Tasks Center Audio Devices Mie i ES We e Symantec System Taskbar and User Accounts Windows indows Wireless LiveUpdate Start Menu CardSpace Firewall Network Set Local Area Connection Wizard New Connection Wizard e Double click on Internet Protocol TCP IP J Local Area Connection Properties File and Printer Shar
52. ns not expressly approved by the grqantee of this device could void the user s authority to operate the device Toute modification non approuv e explicitement par le fournisseur de license de l appareil peut entainer l annulation du droit de l utilisateur Utiliser l appareil YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 53 NEILL This product includes copyrighted third party software licensed under the terms of the GNU General Public License Please refer to the GNU General Public License below to check the detailed terms of this license The following parts of this product are subject to the GNU GPL and those software packages are copyright by their respective authors Linux 2 6 21 system kernel busybox_1_00_rc2 bridge utils 0 9 5 dhcpcd 1 3 ISC DHCP V2 P5 syslogd spread from busybox wireless tools ntpclient of NTP client implementation GNU Wget Availability of source code Please visit our web site or contact us to obtain more information GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to
53. nunnnnunnnnnn nun nnnnnnnnnnnnnunnnnunnnnnnnnunnnnnnnnnunannunnnnnnnnnnn nun 9 Seung UP your GEES ban E Air a E a 10 d Wep GONT ee WZA E 15 LAGINE CG a O E 19 GIG NO EE 19 ZEA C ERRE E EE 30 KEE EE 31 Ne Viele 10 0 11 E 38 H eh EE 43 Ee el D D a on A te 48 6 Appendix B Establishing your Wireless Connection u22 2u0000200000nn00nnnnnnnnnnnunnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnen 49 Ts ei TOU SOONG re ea Re ne eee eee nn ns casa ein een 50 Bi Lega and Regulatory Moma D ei ae ne 52 YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 3 OVERVIEW HSPA WIFI ROUTER NETCOMM LIBERTY SERIES 1 Overview The NetComm 3G25W R integrates a Wireless LAN and 3G WAN into one unit Connection to the Internet is achieved through either a 3G service or via a fixed line xDSL Cable Satellite connection to the 3G25W R s WAN port providing you with the flexibility to choose how you access the Internet The 3G25W R s automatic failover ensures you are always connected by activating the xDSL Cable Satellite connection should the 3G connection drop out Users are able to share a single 3G connection via both a wired and wireless connection to the 3G25W R With a built in 2 transmit 2 receive 2T2R 802 11n wireless access point this router provides wireless speeds of up to 300Mbps 6 times faster than 11g technology On top of this the 3G25W R has four LAN ports for wired connections to multiple
54. o enable the Domain Filter tick the Enable tick box at the top of the page Description Log DNS Query Enable this if you want to log when someone accesses filtered URLs Privilege Host Netmask Set a group of computers that has unrestricted access to the internet To set a Domain Filter you need to specify the following Wu Domain Suffix Please type the suffix of the URL that needs to be restricted For example com xxx com Action The router action that you want when someone is accessing a URL that matches the specified domain suffix Select Drop to block the access and or select Log to log this access Enable Tick to enable the rule Click Save to save the settings or Undo to cancel URL Blocking URL Blocking will block LAN computers from connecting to a pre defined website The major difference between the Domain Filter and URL Blocking is that Domain Filtering require users to input a suffix e g xxx com yyy net while URL Blocking only requires you to input a keyword e el IW Basic sernmcs 2 FoRwaRDING RULES SECURITY SETTINGS ADVANCED SETTINGS SC TOOLBOX URL Blocking ID URL Enabled ee Q21919 919919 79 7 Save Undo To enable URL Blocking tick the Enable tick box at the top of the page To set a URL Blocking rule you need to specify the following Descri
55. o not wish to change the password leave the fields blank and click Next Setup Wizard Customize login password if required EXIT gt Old Password I New Password gt Reconfirm Back Start gt Password gt Time gt LAN WAN gt WLAN gt Summary gt Finish Next gt e The time zone should be set correctly by default if it is not please select your Time zone from the pull down menu and click Next Lam J wan gt w gs YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 15 NEICOMM e Enter the following APN to configure your connection fixed isp apn and then click Next EE B Setup Wizard Customise 3G connection settings if required EXIT APN fixed isp apn optional PIN Code optional Retype PIN CODE optional Dialed Number WE Account it optional Passwort d optional _ lt Back Start gt Password gt Time gt WLAN gt Sum Finish I Net If you want to change the wireless network name or channel settings you can do so on this page Change the settings as needed and click Next If you wish to use the default settings click Next sess ee Az _ eet eet e B Setup Wizard Customise Wireless LAN settings if required EXIT gt Wireless LAN Access Point Enabled Disabled gt WLAN Network Name SSID JROGERSED8B gt
56. ocol Version 6 TCP IPv6 Pers Protocol veson TCP IP Link Layer Topology Discovery Mapper I O Driver M Link Layer Topology Discovery Responder instal Uninsta Properties Descripti Transmission Control Protocol Intemet Protocol The default across diverse interconnected networks e Check Obtain an IP address automatically and Obtain DNS server address automatically then click on OK to continue Internet Protocol Version 4 TCP IPv4 Properties 2 25 You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings IP address Subnet mask Default gateway Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server Validate settings upon exit e Click on OK to complete the setup procedure YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 11 NEICOMM For Windows 7 32 64 e Click on Start gt Control Panel in Category View gt View network status and tasks L i System and Security User Accounts and Family Safety Review your computer s statu Add or remove user accounts Find and fin problems Appearance and Personalization Connect to the internet Change deritop background 4 Clock Language and Region Change keyboard ce o
57. ol This Item enables QoS function or not Bandwidth of Upstream Set the limit on the upstream speed Local IP Ports Define the Local IP address and port to apply QoS to Remote IP Ports Define the Remote IP address and port to apply QoS to QoS Priority This defines the priority level of the current Policy Configuration Packets associated with this policy will be serviced based upon the priority level set For critical applications High or Normal levels are recommended For non critical applications select a Low level User Rule The QoS rules can work in conjunction with Scheduling Rules For further instructions on scheduling rules please refer to the Scheduling section later in this guide Click on Save to store your setting or Undo to discard your changes SNMP SNMP Simple Network Management Protocol is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events ADMINISTRATOR s MAIN MENU M Status Wizard Advanced gt Logout a _ IW Basic sertmcs lt 22 FORWARDING RULES SECURITY SETTINGS ff ADVANCED SETTINGS 40 TOOLBOX S ie Status D SNMP Setting System Log Rem Setting Dynamic DNS gt Enable SNMP I Local F Remote oncom cme aan ee Routing IP1 Ir System Time IP2 IT Scheduling IP3 D en JI gt SNM
58. ons Inc or PO Box 1200 Lane Cove NSW 2066 Australia an affiliate NetComm and the NetComm logo are trademarks of Netcomm Limited 2010 W www netcommlimited com MCRogers le ruban de Mobius Parlez la carte et C montour sont des marques de commerce ou utilis es sous licence de Rogers Communications inc ou d une soci t de son groupe NetComm et le logo NetComm sont des marques de commerce de NetComm Limit 2010 Trademarks and registered trademarks are the property of NetComm Limited or their respective owners Specifications are subject to change without notice Images shown may vary slightly from the actual product
59. opriate authentication type for your 3G service Primary DNS Manually assign a Primary DNS Server Secondary DNS Manually assign a Secondary DNS Server Connection Control There are 3 modes to select from Connect on demand The 3G25W R will connect to the internet when a client sends outgoing packets Auto Reconnect Always on The 3G25W R will automatically reconnect to the internet until the connection is manually disconnected Manually The 3G25W R will not connect to the internet until someone clicks the connect button in the Status page Roaming Enable 3G roaming on the connection Half Bridging YML25WVR www netcommlimited com This option enables Half Bridging for this connection type Half bridging is utilised to enable a single computer to be Live on the internet This means any services such as internet gaming which would usually require port forwarding for are able to be connected to directly HSPA WIFI ROUTER User Guide 21 NEILCOMM Static IP Address Network Setup LAN Setup DHCP Server ss ee EURE gt LAN IP Address 132 188 1 1 eee Bean Subnet Mask 255 255 255 0 Ethernet Port 4 mode act as WAN port D B Internet Setup gt Combo WAN status Disable Setting gt WAN Interface Ethemetwan gt WAN Type Static IP Address WAN IP Address l 007 gt
60. or deny clients with MAC addresses that are not in the list to connect to this device Association control Check Association Control to control which wireless client can associate with the unit If a client is denied access to associate with the unit it means the client cannot send or receive any data via this device Choose to allow or deny the clients with MAC addresses that are not in the list to associate to the wireless LAN Click the Next Page or the Previous Page buttons to see the entire list Click Save to save the settings or Undo to cancel HSPA WIFI ROUTER User Guide YML25WVR 36 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Miscellaneous This page allows you to change various miscellaneous security settings on the unit Miscellaneous tems Rem Setting Enabled gt Administrator Time out bon seconds 0 to disable gt Remote Administrator Host Port d gt Discard PING from WAN side m DoS Attack Detection mi Description Administrator Time out The period of time with no activity in the web configuration page to logout automatically set this to zero to disable this feature Remote Administrator Normally only Intranet users can browse the built in web pages to perform administration tasks Host Port This feature enables you to perform administration tasks from a remote host If this feature is enabled only the specifi
61. ou can also check the DHCP client list by clicking the Client List button See the section DHCP Client List below for more information The Fixed Mapping button allows you to map a specific IP address to a specific MAC address See the section DHCP Fixed Mapping below for more information Click the More button for the following extended options Lease Time gt Domain Name gt Primary DNS gt Secondary DNS gt Primary WINS gt Secondary WINS Save Undo Clients List Fixed Mapping OPTION DESCRIPTION Primary DNS Optional this information will be passed to the client Secondary DNS Optional this information will be passed to the client Primary WINS Optional this information will be passed to the client Secondary WINS Optional this information will be passed to the client Gateway Optional this information will be passed to the client HSPA WIFI ROUTER User Guide YML25WVR 26 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES DHCP Clients List DHCP Clients List Lease IP Address MAC Address Time lete Back Refresh This is the list of currently connected devices utilising DHCP If you wish to set a permanent IP address for a particular DHCP client or device select the appropriate DHCP client by clicking in the Select box This will ensure t
62. our current settings by clicking the Backup Setting button then and save it as a bin file D RATOR N MEI M Stat Wizard Tal Advanced ogouf IW Basic sernmcs FORWARDING RULES SECURITY SETTINGS A ADVANCED SETTINGS u TOOLBOX Resetthis device to factory defaults Reboot Rebootthis device Miscellaneous Allows configuration of Wake on LAN When you want to restore these settings click the Restore Setting link and use the bin file you saved Reset to Default You can reset your 3G25W R to the factory default settings by clicking on this link TOOLBOX System Info View the system logs PIN Control Allows modification of SIM card s PIN settings Restore Setting Load the settings ofthis device from a file parade ofthe device Reset to Default Reset this device to factory defaults Reboot Reboot this device Miscellaneous Allows configuration of Wake on LAN After clicking OK the router will reset and start up with the default settings loaded YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 45 MEILOM Reboot You can reboot your router by clicking on the Reboot link This can be useful to ensure restore settings are loaded BASIC SETTINGS KA FORWARDING RULES SECURITY SETTINGS ff ADVANCED SETTINGS G TOOLBOX u TOOLBOX System Info View the system logs PIN Control
63. ovider DynDNS org Dynamic 7 Host Name gt Username E mail Password Key Before you can use Dynamic DNS service you need to register an account on one of the many supported Dynamic DNS providers such as DynDNS org TZO com or dhs org After registering the account the Dynamic DNS provider will provide you with the following details Host Name e Username Email Password Key To enable the Dynamic DNS feature on the unit click the Enable check box choose the appropriate Dynamic DNS Provider and enter the details supplied by your Dynamic DNS provider Click Save to save the settings or Undo to cancel YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 39 NEILL QOS Quality of Service QoS provides different priority to different users or data flows It can also guarantee a certain level of performance ADMINISTRATOR S MAIN MENU A s A a SH Advanced gt Logout e pen we BASIC SETTINGS A FORWARDING RULES e SECURITY SETTINGS Ke ADVANCED SETTINGS G TOOLBOX amp QoS Rules a er Dynamic DNS gt QoS Control T Enabled QoS gt Upstream Bandwidth IT kbps Kilobits per second ar os tn System Time D To Awars x Scheduling o o aways TC fo always x TC toy always x D 0 Aways x TC To always x High li FT Tu Always zl Save Undo Description QoS Contr
64. ption URL If any part of the Website s URL matches the pre defined word then the connection will be blocked For example you can use pre defined word sex to block all websites if their URLs contain the pre defined word sex Enable Tick to enable the rule Click Save to save the settings or Undo to cancel YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 35 NEICOMM MAC Control MAC Control allows you to assign different access rights for different users and to assign a specific IP address to a specific MAC address MAC Address Control gt MAC Address Control 7 Enabled F Connection control Wireless and wired clients with C checked can connectto this device and allow gt unspecified MAC addresses to connect Setting I association control Wireless clients with A checked can associate to the wireless LAN and allow 7 unspecified MAC addresses to associate DHCP clients select one _Copyto 10 e MAC Address c A rp Is 3 D E E 5 D D To enable MAC Address Control tick the Enable tick box at the top of the page Two types of MAC Control are available Description Connection control Use this to control which clients wired and wireless can connect to the unit If a client is denied access to connect to this device it means the client cannot access the Internet either Choose to allow
65. r converts IP addresses to human readable format Connection Time The time the current connection to the internet has been active Link Status Signal Strength The current connection status disconnected connecting and connected The current signal strength of your 3G service Network Name The current network carrier providing your 3G connection SIM Status The current status of the inserted SIM Wireless mode The current status of the wireless network enabled or disabled SSID The current wireless network name is use by the router Channel The current wireless channel in use on your wireless network Security The currently selected wireless security in use on your wireless network Octets The number of data packets which have passed into and out of the router Unicast Packets The number of unicast packets which have passed into and out of the router Multicast packets The number of multicast packets which have passed into and out of the router YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 17 ADVANCED HSPA WIFI ROUTER NETCOMM LIBERTY SERIES 4 Advanced Configuration To access the advanced configuration options of your 3G25W R you need to login to the web configuration and click on the Advanced menu at the top of the page Open your web browser e g Internet Explorer Firefox Safari and type http 192 168 1 1 into the address bar at
66. rol For further instructions on scheduling rules please refer to the Scheduling section later in this guide For example if you have an FTP server the default port is 21 at 192 168 1 10 a Web server the default port is 80 at 192 168 1 20 and a VPN server the default port is 1723 at 192 168 1 60 then you would need to specify the following virtual server mappings Note At any given time only one IP address can bind to a particular Service Port Service Port Server IP Enable Use Rule 192 168 1 10 0 Always 192 168 1 20 0 Always 192 168 1 60 0 Always Click Save to save the settings or Undo to cancel YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 31 NEICOMM Special Applications Enabled m Save Undo Some applications like On line games Video conferencing and Internet telephony require multiple connections to the internet As such these applications cannot work with a pure NAT router such as the 3G25W The Special Applications feature allows some of these applications to work with this router Note If this fails to make the application work try to set up that computer as the DMZ host instead For further instructions on setting up a DMZ host please refer to the Miscellaneous section below OPTION DESCRIPTION Trigger The outbound port number that will be triggered by the application
67. rovider D Routing Modify CS awe Dynamic Routing Disabled Static Routing Disabled Destination Subnet Mask Gateway Hop QoS Control Disabled Local Client Remote Host Service Priority Working Time The status page shows the currently configured System Time and if there are any configured e Dynamic DNS Services e Dynamic or Static Routing rules e QoS control rules System Log This enables you to set up the system log features of the router You can also choose to send the system log to a remote syslog server via a UDP connection IP Address for remote System Logs syslog The IP address of the syslog server where the system log data will be sent Click the Enabled checkbox to enable this function View Log View the current system log HSPA WIFI ROUTER User Guide YML25WVR 38 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Dynamic DNS The Dynamic DNS feature enables users to set a static domain name for their internet connection even when the ISP only provides a dynamic IP address By mapping the host name to the current public IP address of the router users who want to connect to the router or any services behind the router from the internet can just use the Dynamic DNS hostname instead of the IP Address which might change every time the router connects to the Internet DDNS Disabled Enabled gt Pr
68. s the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally
69. share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distrib
70. t to the LAN unless a specific port mapping exists in the NAT translation table Because of this NAT provides a level of protection for computers that are connected to your LAN However this also creates a connectivity problem when you want to make LAN resources available to Internet clients For example to play network games or host network applications There are three ways to work around NAT and to enable certain LAN resources available from the Internet e _ Port Forwarding available in the Virtual Server page e Port Triggering available in the Special AP page e DMZ Host available in the Miscellaneous page HSPA WIFI ROUTER User Guide YML25WVR 30 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES Virtual Server En _ oO Le Te T 4 Bl EL o O Aways x 5 LI T O Aways x E C o O Aways ee ES ton _ oOo Le fae IT C ei To aways Cd a o O Aways 12 IR LI T O Aways x C7 J m 0 Always DI TH D 0 Always gt P TP ET seg 1 C E o O Aways x 18 D 0 Always z 9 see gege o O Aways x LS r foe ges Und A virtual server is defined as a Service Port and all requests to this port will be redirected to the computer specified by the Server IP Virtual Servers can also work with Scheduling Rules and give you more flexibility on Access cont
71. that wireless clients can find the wireless network WLAN Channel The wireless radio channel in use by your network Wireless Mode Choose B G Mixed B only G only and N only G N Mixed or B G N mixed The factory default setting is B G N mixed Authentication You may select from the following authentication types to secure your wireless network e Open Shared Auto WPA WPA PSK WPA2 WPA2 PSK WPA WPA2 WPA PSK WPA2 PSK WPA PSK WPA2 PSK is a newer type of security This type of security gives a more secure network compared to WEP Use TKIP Encryption Type for WPA PSK and AES for WPA2 PSK Please enter the key in the Preshare Key The key needs to be more than 8 characters and less than 63 characters It can be any combination of letters and numbers Refer to the included Wireless Security Card for the default WPA PSK2 key in use on your router Note The configuration for WPA PSK and WPA2 PSK is identical After configuring wireless security you also need to configure your wireless adapter to use the same security settings before you can connect wirelessly Not all wireless adapter supports WPA PSK WPA2 PSK WPA WPA2 security Please refer to your wireless adapter user guide for more information It is strongly recommended to set up wireless security such as WPA PSK when the wireless client supports WPA in order to secure your network Click Save to save these settings or click Undo to canc
72. ther mput method age hange display langu e Ease of Access Let Wingows suggest retbngs giereg wegl display Choe and shanng options i Hardware and Sound e Inthe Control Panel Home click on Change adapter settings on the left hand side of the window to continue Single RIGHT click on Local Area Connection then click Properties Local Area Connectior A _ Identifying ee Marvell Yukon 88E Bridge Connections Create Shortcut Delete Rename Properties e Double click on Internet Protocol Version 4 TCP IPv4 r Local Area Connection Properties Connect using E Marvell Yukon 88E8058 PCI E Gigabit Ethemet Controller This connection uses the following items Client for Microsoft Networks M 41005 Packet Scheduler B File and Printer Sharing for Microsoft Networks Intemet Protocol Version 6 TCP IPv6 el Intemet Protocol Version 4 TCP IPv4 4 Link Layer Topology Discovery Mapper 1 0 Driver Link Layer Topology Discovery Responder ern e Check Obtain an IP address automatically and Obtain DNS server address automatically then click on OK to continue S Internet Protocol Version 4 TCP IPv4 Properties 2 You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings IP address
73. u received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 55 NEILL who have received copies or rights from you
74. ult MTU value is O auto It is set automatically when you connect Half Bridging This option enables Half Bridging for this connection type Half bridging is utilised to enable a single computer to be Live on the internet This means any services such as internet gaming which would usually require port forwarding for are able to be connected to directly YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 25 NEILL DHCP Server This Page allows you to change the Dynamic Host Configuration Protocol DHCP server settings on the 3G25W R The DHCP Server enables computers or devices connecting to the 3G25W R to automatically obtain their network configuration settings By default the DHCP server is enabled IP Pool Starting Address gt IP Pool Ending Address a Lease Time eg Seconds gt Domain Name sr Save Undo More Clients List Fixed Mapping OPTION DESCRIPTION DHCP Server Enable or disable the DHCP server IP Pool Starting Ending Address Whenever there is a request the DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer You must specify the starting ending address of the IP address pool Lease Time Length of the DHCP lease time Domain Name Optional this information will be passed to the client Click Save to save these settings or Undo to cancel Y
75. ute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow HSPA WIFI ROUTER User Guide YML25WVR 54 www netcommlimited com HSPA WIFI ROUTER NETCOMM LIBERTY SERIES GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim
76. word etc please contact Rogers Customer Care Internet connection disconnects The internet connection drops out periodically Correct Action Check for available 3G coverage Check for appropriate signal strength Check for a schedule rules to prevent internet access from the Scheduling configuration page Contact your 3G SIM provider to verify your 3G service is active YML25WVR HSPA WIFI ROUTER User Guide www netcommlimited com 51 NEILCOMM 8 Legal and Regulatory Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modific

HSPA+ WIFI ROUTER

Contents

Download Pdf Manuals

Related Search

Related Contents