GM10-50B
Contents
1. in this manual without prior notice UMGM10 50B 12 7 20102. tw 60ns d c Minimum Menn f a 5V 50V 0V gt 200V UMGM10 50B Issue o 2 12 7 2010 f GM10 50B P HOTEK pio No ENVISAGE THE FUTURE GM10 50 Connectors 53 25mm Input Power SMB Socket pT Sereen OV SMA Socket TTL Pulse ee Gate Output Off 50V On 200V GM10 50B8 35 0mm Cathode Gating Module i Min Pulse 50ns into 100pf Max Repetition Rate 10kHz C Serial Number E08048 Input Signal OV Output Signal SMA Socket HT Pulse Screen OV Items Supplied 1 off GM 10 50B Gating Module l off Signal Cable Im BNC to SMA l off Power Cable 1m SMB to Bare Ends 1 off UMGM10 50 GM10 50 Operating Notes Electrical Specifications Inputs Electrical Specifications Outputs Supply Voltage 5V D C 10 Negative O P Voltage Max 200V Supply Voltage Absolute Max 5 5V D C Positive O P Voltage Max 50V Input Drive Pulse SV TTL Output Pulse Min 50ns FWHM Supply Current Maximum 200mA Output Current Max Operating Frequency 10kHz Input Impedance 4 7kQ Output Load Max 100pF Jitter Input to Output Operating Frequency Max LOkHz 5325mm D C Wom D S S 35 0mm 38 5mm STe Photek Ltd July 2010 Any unauthorised adjustment or modification to this unit will void all warranties and will only be supported at Photeks discretion Photek reserves the right to amend general information contained
3. GM10 50B PH TEK inmo ENVISAGE THE FUTURE GM10 50B Power Input 5V GM10 50B 10kHz 50ns Gating Module me Trigger Cathode Gating Module The GM10 50 module is a 5V d c powered 250V e e a pulse amplifier for periodic operation of MCP devices by biasing the Cathode on and off for specific lengths of time This unit requires an external 5 V 200mA power supply and 5V TTL input trigger pulse The GM10 50 is designed to gate 25mm and 40mm Image Intensifier devices with approximate capacitance between Cathode and MCPIN of 40 100pf The output pulse is directly related to the input pulse but will be delayed by approximately 120ns There is a pulse width loss across the GM10 50 between 10 and 30ns Operating Characteristics The gate module is intended to connect directly to the cathode and MCP input of the device being gated by a short length of wire The cathode is biased at 50V nominal with respect to the first MCP and the detector is normally off MCP In potential OV Activation of the gate module will drive the cathode 200V nominal w r t MCP In and thus turn the detector on The gate pulse drive required is 5V TTL The GM 10 50 has an input impedance of 4k7 The propogation delay across the GM10 50 can be as much as 120ns this is specific to each unit and if precise figures are required the unit must be measured The input pulse to output pulse relationship of the GM10 50 is illustrated below
Download Pdf Manuals
Related Search
GM10 50B gm1040b gm1050dscabk gm10500ietc gm10500xit gm10500ietc specs gm10500ietc tri-fuel inverter generator gm10500ietc manual gm10500ietc reviews gm10500ietc 10500-watt weight gm10500ietc generator gm 1050017 power steering fluid equivalent gm 1050017 power steering fluid