LBO--SVI-AD-T User Manual.pmd - Broadata Communications, Inc.
Contents
1. lint free cloth dampened with alcohol to thoroughly wipe the side and end of the ferrule Connect the fiber from one unit to the other connecting the near end LBO SV DH T unit s optical port to the far end of the LBO DVI R unit s optical RX port as illustrated in Figure 2 5 LBO SV DH T is compatible with any LBO receivers Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System LBO SV AD T 05 LBO DVI R LBO SV AD T WP 720 GND CHASSIS e T 5 5 LBO DVI R Figure 2 5 Fiber Optic Connection Broadata Technical Support CustomerService Broadatacom com 13 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 2 3 DC Power Connection Congratulations You are now ready to power up the LBO SV AD T and set up your network connection In order to make sure that you have a proper installation please observe the following 1 Your AC jack has power 2 The 12VDC power supply is working Your electrical system has proper grounding this ensures that your power supply does not suffer from voltage variations 4 Power Surge Protection This is optional but highly recommended A UPS system provides voltage regularity as well as prevents spikes2. Product model number Serial Number Complete description of problem Hardware installation description Broadata Communications Inc 2545 West 237th Street Suite K Torrance CA 90505 1 800 214 0222 810 530 1416 310 530 5958 Facsimile e mail CustomerService Broadatacom com Website www broadatacom com Broadata Technical Support CustomerService Broadatacom com 23 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 7 0 LIMITED WARRANTY Broadata Communications Inc warrants for a period of one year from date of shipment each product sold shall be free from defects in material and workmanship BCI will correct either by repair or at BCI s election by replacement any said products that in our sole discretion prove to be defective and are returned to the manufacturing location within 30 days after such defect is ascertained All warranties are limited to defects arising under normal use and do not include malfunctions or failure resulting from misuse abuse neglect alterations electrical power problems usage not in accordance with product instructions improper installation or damage determined by to have been caused by the Buyer or repair made by a third party Limited warranties granted on products are to the initial customer end user and are not transferable OUR LIABILITY UNDER THIS WARRANTY SHALL IN ANY CASE BE LIMITED TO THE INVOICE VA
3. 4 2 Troubleshooting If the LBO SV AD T units do not operate properly after installation check for possible cable breaks loose connections and incorrect cable connections If a problem exists on the fiber link please check your fiber connectors for improperly cleaned fiber cables and connectors If problems persist that may be fiber related contact BCI at 1 800 214 0222 for further assistance For electrical problems perform the following troubleshooting procedures 1 Ifthe POWER indicator is OFF check for the following a The line cord is plugged into the unit and your outlet has power 2 If the POWER indicator is ON but the Optical Link indicator is OFF check for the following a Make sure the appropriate Multimode fibers are being used b Fiberand fiber connectors are not broken Foreach unit the transmit TX fiber is connected to the other unit s receiver RX 3 Ifthe POWER indicator and Optical Link indicator are ON but the audio video channels are not operating then Broadata Technical Support CustomerService Broadatacom com 19 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System a Checktoseethatthe attached user equipment is turned on b Both ends of the link are connected to the corresponding equipment and to the same corresponding channel port c Cable connections at both the video audio channels are securely fastened to
4. and Negative GND or 12V return and chassis ground CHASSIS to earth ground tip of the power wire as shown in Figure 2 7 to be directly plugged into the captive screw 12VDC connector of the LBO SV AD T WP units see Figure 2 6 Make sure the polarity of the connection is correct Insulate any exposed wire shields to prevent short circuits Broadata Technical Support CustomerService Broadatacom com 15 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System Wall Clamp 4 Junction LBO VGA AD WP 4 i Unit Figure 2 6 In wall fiber power cable installation Captive Screw lt 12V GND CHASSIS Figure 2 7 Power Connection 16 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System Note 1 Note 2 Note 3 Note 4 Note 5 During installation the installer may need to connect the power supply output to an appropriate Listed NEC type cable before it is routed behind a wall Simply routing the power supply output cable behind a wall will most likely not comply with applicable installation requirements Unit should only be powered by a power source that is Listed NEC Class 2 or a Listed ITE Power Supply marked rated as LPS or Limited Power Source The installation shall be in accordance with the applicable provisi
5. enough space to pull and connect both the electrical and optical cables without stressing them beyond the manufacturer s limitations also known as the minimum bend radius 2 2 Cabling and Connectors In order to setup the LBO SV AD T properly make sure to observe the following instructions when installing the proper cables The LBO SV AD T requires two parts to the cabling setup the electrical and the optical 8 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 2 2 1 Electrical Cable Connection The three available cable connections on the electrical side are for SV video audio and data connections Follow the proceeding instructions in order to properly install your electrical connections 2 2 1 1 SV Video Interface Use the following instructions to properly connect your intput S Video or Composite video as illustrated in Figure 2 2 1 Connectthe LBO SV AD T Transmitter unit s S Video or Composite input port to the corresponding user s S Video or Composite video source with the appropriate video cables 2 Notethatthe LBO SV AD T has an auto sensing feature which will select the connected input video interface S Video or Composite video If both S Video and Composite video input are connected S Video will be the default input DATAQ QOUT 2 1 Y 2 1 IN QAUDIO o LB S C Tx 9 MO User s Composite Video E
6. each connector Turn the power off then back on to reset the link 20 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 5 0 SPECIFICATIONS Video Input Format Output Format Resolution Connector Audio Channel Capacity Operating Mode Input Output Impedance Max Input Output Level Magnitude Freq Response THD N Connector Serial Data Channel Capacity Signal Format Data Rate Connector Optical Fiber Type Number of Fibers Connector S Video or Composite Video DVI HDMI AVGA Compatible Up to 1920x1200 60Hz Up to 1080p 60Hz BNC for composite video or S video jack for S video 2 Unbalanced Stereo Audio Bi directional 10k 50 Ohms Stereo Audio 5 dBu 4Vpp Stereo Audio 20Hz to 20kHz 3dB gt 70 1k Hz Stereo Audio 3 5mm Stereo Jack 2 RS 232 Up to 57 6kbaud Terminal Block Multimode 1 SC Broadata Technical Support CustomerService Broadatacom com 21 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System Physical Dimension Standalone 4 17 W x 4 1 D x 1 1 H Wallplate 1 75 W x 2 70 D x 2 81 H Power Level max 12VDC 1 5 Operating Temperature 0 to 50 C Humidity 0 to 95 RH non condensing Resolution Vertical Refresh Rate Hz NTSC 480i 720x480 59 94 NTSC 0 IRE 480i 720x48
7. 0 59 94 PAL I 575i 720x575 50 PAL B GH 575i 720x575 50 PAL N 575i 720x575 50 Ordering Information LBO SV AD T M SC Fiber Transmitter SV CV Multimode 1 Fiber LBO DVI AD R M SC Fiber Receiver DVI Multimode 1 Fiber DVI SV ___ HDMI CV LBO HDMI AD R M SC Fiber Receiver HDMI Multimode 1 Fiber VGA LBO VGA AD R M SC Fiber Receiver RGB Multimode 1 Fiber With Audio RS 232 Add WP for Wallplate configuration Add CH for LBO CH Chassis mounting kit Add UPS for International Universal Power Supply LBO SV DH CV SV to DVI Converter SV CV DVI Add CH for LBO CH Chassis mounting kit Add UPS for International Universal Power Supply 22 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 6 0 SERVICE PROCEDURE 6 1 Replacement Policy Standard products found defective on arrival DOA will be replaced based on availability within 24 to 48 hours anywhere in the U S Please call Customer Service at 800 214 0222 for information 6 2 Return Repair Service The LBO SV AD T System contains no user serviceable components If you have a problem with your unit please contact the Customer Service Department To facilitate our return repair processing please contact Broadata Communications Inc to obtain a Return Material Authorization RMA Please include the following information
8. Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System FRONT PANEL WALL PLATE Link LED S Video Input Connector Audio Out Composite Video Audio In Input Connector Data Out Data In Figure 1 3 LBO SV AD T WP Front Panel REAR PANEL WALL PLATE q Q Q I Power L 12V Connector gt mo CHASSIS Fiber Optic LINK PORT Connector 5 Figure 1 4 LBO SV AD T WP Rear Panel Broadata Technical Support CustomerService Broadatacom com 7 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 2 0 SETUP LBO SV AD T is a transmitter and it can be paired with any DVI HDMI centric LBO receiver such as LBO DVI R One LBO SV AD T transmitter unit is located at the near end and connected through one optical fiber to the LBO DVI R receiver located at the far end of the link Figure 2 1 depicts a typical installation for the LBO SV AD T LBO SV AD T LBO HOMUDVLVGA AD R CompasteS Video HOMOR GB Stereo Audo lt 3 33 Sime Audio RE 232 2 c 1 Watmode Fiber RS 232 2 Figure 2 1 Mini SV AD T Setup 2 1 Mounting Before installing the units into your housing make sure there is
9. LBO SV AD T LINK BRIDGE OPTIC S VipEo CowPosriTE VIDEO SCALING TRANSMITTER SYSTEM BCI reserves the right to make changes to the products described herein without prior notice or consent No liability is assumed as a result of their use or application All rights reserved 2012 Broadata Communications Inc SSeroapara COMMUMITATIONS LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System SAFETY INSTRUCTIONS AND COMPLIANCE DECLARATIONS PLEASE OBSERVE THE FOLLOWING SAFETY PRECAUTIONS AS OUR PRODUCTS CONTAIN CLASS I LASER PRODUCTS WARNING Do not disconnect the fiber optic connector while the unit is powered up Exposure to laser radiation is possible when the laser fiber optic connector is disconnected while the unit is powered up Although the fiber optic connectors in this product emit only Class 1 energy that is below the levels considered to be hazardous one should never stare directly into a fiber optic connector or an unconnected fiber end unless one can be certain that no exposure to laser energy could CAUTION This manual is intended for use by trained service personnel The use of controls making adjustments or performing operations other than those specified may result in hazardous radiation exposure Thefollowing label or equivalent is located on the surface of laser products This label indicates that the product
10. LUE OF THE PRODUCT SOLD AND BCI SHALL NOT BE LIABLE TO ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE USE OF ITS PRODUCTS OR THE SALE THEREOF We make NO WARRANTY AS TO THE MERCHANTABILITY OF ANY GOODS OR THAT THEY ARE FIT FOR ANY PARTICULAR PURPOSE OR END APPLICATION NOR DO WE MAKE ANY WARRANTY EXPRESSED OR IMPLIED OTHER THAN AS STATED ABOVE 24 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System Broadata Technical Support CustomerService Broadatacom com 25 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 26 Broadata Technical Support 800 214 0222 Broadata Communications Inc 2545 West 237th Street Suite K Torrance CA 90505 1 800 214 0222 810 530 1416 810 530 5958 Facsimile e mail CustomerService Broadatacom com Website www broadatacom com MBRDADATA CON MUNICATION 60000 LBOSV AD T
11. UBLESHOOTING J nuin 19 50 SPECIFICATIONS 21 6 0 SERVICE PROCEDURE 23 6 1 REPLACEMENT POLICY 23 6 2 RETURN AND REPAIR SERVICE 23 7 0 LIMITED WARRANTY 24 4 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 1 0 PRODUCT DESCRIPTION The LBO SV AD T is a high performance low cost miniature Link Bridge Fiber Optic Video Scaling Transmitter System with Audio Data It carries one 1 unidirectional S video SV or one 1 unidirectional composite video CV through one multimode fiber for being displayed with DVI HDMI VGA video panel This unique fiber optic transmission system lets your SV CV video source displayed in DVI HDMI VGA digital flat panel display extending up to 400m In addition to unidirectional video transmission the LBO SV AD T also carries one bi directional stereo audio and two 2 RS 232 data over the same fiber cable as well as features auto SV CV input video detection The LBO SV AD T supports video resolution up to WUXGA 1920 x 1200 60 Hz or 720p 1080i 1080p HDTV video resolution In addition this product model has an option for video only configuration which allows either f
12. V AD T unit Audio output to LBO SV AD T unit Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 2 2 1 3 Serial Data Interface Each LBO SV AD T unit can be used for RS 232 interface RS 232 data The LBO SV AD T transmits two channels of data signals Follow the procedures for installing data terminal devices 1 Label and connect one serial computer data cable to the user s RS 232 device 2 Connectthe other end of this cable to the front panel data terminal block connector on the LBO SV AD T see Figure 2 4 Ch2 Chi GND Ch2 Ch Figure 2 4 RS 232 Terminal block pinout Broadata Technical Support CustomerService Broadatacom com 11 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 2 2 2 Optical Fiber Connection Most cable manufacturers identify individual fibers in the fiber cable Select an appropriate terminated fiber Each unit s optical ports in the system are specified for use with Multimode 62 5 125 or 50 125 micron fiber Follow the ensuing instructions on installing and connecting the fiber optic links 1 Ensure the power is off before proceeding with the fiber optic cable installation Prior to connecting the fiber optic cables remove and save the dust caps from the optical port of the LBO SV AD T units Clean the fiber optic connector and use
13. from occurring thus protecting your LBO SV AD T from sensitive voltage conditions The LBO SV AD T derives power from an external 12VDC power supply This power supply is a wall mounted AC DC adapter 100 240 VAC 50 60 Hz at 1 5A This power supply comes standard for the LBO SV AD T unless otherwise specified If you have any problems or concerns regarding the installation make sure that you have taken the proper steps to ensure a proper power connection Otherwise feel free to contact us for any questions you may have 14 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 2 4 In Wall Power Fiber Wiring Instruction The in wall power fiber installation for the LBO SV AD T WP wall plate version must confirm national and local electrical codes e g UL junction boxes shall be used and DC power source shall not exceed product rated range 12VDC 1 54 Follow the following steps for power fiber installation 1 As shown in Figure 2 6 feed both fiber and power cables through the opening of the wall box and secure the cables with cable clamps to provide strain relief Terminated fiber with SC optical connector to be directly plugged into the SC connector port of the LBO SV AD T WP units see Figure 2 5 Before connecting power wire to the LBO SV AD T WP unit make sure power supply is off Prepare the Positive 12V
14. iber or electrical transmission No user adjustment is required for the LBO SV AD T due to the use of advanced digital fiber optic transmission system technology This allows for a quick and easy setup offering trouble free operation for many years to come In addition the LBO SV AD T transmitter is compatible with our LBO Series receiver This makes both fiber transmission and HDMI DVIA GA YPbPr SV CV SDI conversion in one single system setup The LBO SV AD T comes with either a standalone miniature enclosure or a Decora wall plate packaging The units are easily monitored by power and link LED indicators Option LBO SV DH is also available for converting SV CV video to DVI video without fiber optical transmission This option is perfect for short distance copper transmission applications Figures 1 1 1 2 1 3 and 1 4 illustrate the front and rear panels of the LBO SV AD T model Broadata Technical Support CustomerService Broadatacom com 5 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System FRONT PANEL STANDALONE Power Optical Link LED Audio Out PWR DATAQ QOUT 2 1 2 1 IN LINK O OAUDIO S 8 Composite Video Audio In Input Connector S Video Input Connector Figure 1 1 LBO SV AD T Front Panel REAR PANEL STANDALONE 12VDC gt 1 5 LINK Fiber Optic Output Connector Power Connector Figure 1 2 LBO SV AD T Rear Panel 6
15. is classified as a CLASS 1 LASER PRODUCT Class Laser Product dud D SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes surges electric shock lightning strikes etc Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment Broadata Technical Support CustomerService Broadatacom com 3 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System TABLE OF CONTENTS 1 0 PRODUCT DESCRIPTION 5 2 0 SETUP qc 8 21 MOUNTING aaa aaa aaa usss as ssssassuusasuassssaasasaquasasunaasa 8 2 2 CABLING AND CONNECTORS 8 2 2 1 ELECTRICAL CABLE CONNECTIONS 9 2 2 1 1 SV VIDEO INTERFACE 9 2 2 1 2 AUDIO INTERFACE rana uiis 10 2 2 1 3 SERIAL DATA INTERFACE 11 2 2 2 OPTICAL FIBER CONNECTION 12 2 3 DC POWER CONNECTION 14 2 4 IN WALL POWER FIBER WIRING INSTRUCTION 15 3 0 OPERATION m 18 4 0 MAINTENANCE AND TROUBLESHOOTING 19 MAINTENANCE nis sera ape 19 4 22 TRO
16. ons of the National Electrical Code ANSI NFPA 70 Article 725 and the Canadian Electrical Code Part 1 Section 16 The power supply shall not be permanently fixed to the building structure or similar structures The power supply shall not be located within environmental air handling spaces or within the wall cavity The power supply is to be located within the same vicinity as the A V processing equipment in an ordinary location Pollution Degree 2 secured to the equipment rack within the dedicated closet podium or desk Broadata Technical Support CustomerService Broadatacom com 17 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 3 0 OPERATION After the installation procedure is completed the units are ready for operation To operate the LBO SV AD T units simply apply power as indicated in the previous sections The following describes the LED activity When power is connected this LED turns RED PWR LINK When power and optical link are on this LED turns GREEN Table 1 LED Indicator 18 Broadata Technical Support 800 214 0222 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 4 0 MAINTENANCE AND TROUBLESHOOTING 4 1 Maintenance There is no operator maintenance other then keeping the units clean However observe the following light indicators to make sure that the unit is working properly
17. quipment User s S Video Equipment User s S Video ER User s Composite e LS I Video Equipment Figure 2 2 Input Video Connection Broadata Technical Support CustomerService Broadatacom com 9 LBO SV AD T User s Manual Link Bridge Fiber Optic S Video Composite Video Scaling Transmitter System 9 PW LINK O 2 2 1 2 Audio Interface The audio interface supports two channel high fidelity transmissions Two separate mono channels or one stereo channel is transmitted in each direction Line level audio signals are connected to the LBO SV AD T units The following steps illustrate the installation procedures for audio devices To send audio signals label and connect one stereo audio jack cable to the AUDIO OUTPUT connector of the line level audio source On the LBO SV AD T unit connect the other end of the cables to the front panel stereo jack connector labeled AUDIO IN see Figure 2 3a To receive audio signals at the far end location label and connect one stereo audio jack cable to the AUDIO INPUT connector of the line level audio receiver On the LBO SV AD T unit connect the other end of the cables to the front panel stereo jack connector labeled AUDIO OUT see Figure 2 3b DATAQQOUT 2 1 v 2 1 IN PARI DATAQ QOUT 2 AUDIO 8 AUDIO q Figure 2 3a Figure 2 3b Audio input to LBO S
Download Pdf Manuals
Related Search