Manual - S2Konnect
Contents
1. ok EO oND S2Konnect S 8180T Sa NECT The S2Konnect Unmanaged Switch must not be exposed to direct sunlight or be installed near Make sure that the wall is capable of supporting the S2Konnect Unmanaged Switch heating vents The location should be ventilated to prevent overheating Installation in a Rack To install the S2Konnect Unmanaged Switch in a rack proceed as follows 1 2 3 Attach the brackets at each side of the S2Konnect Unmanaged Switch using the supplied screws Insert cage nuts into the mounting rail of the rack Hold the S2Konnect Unmanaged Switch against the rack ensuring that the bracket holes align with the holes of the rack Screw the S2Konnect Unmanaged Switch on the rack using the supplied screws m l _ e oaa LA bp a uuug f JLS a Figure 2 Rack Installation Tighten the screws Plug in the power cord Turn on the S2Konnect Unmanaged Switch The green Power LED should light up indicating that the power supply is ok ches deep The S2Konnect Unmanaged Switch can be installed in racks which are at least 48 3cm 19 in S2Konnect S 8180T 10 Connection of the S2Konnect Unmanaged Switch This chapter describes the physical connection of the S2Konnect S 8180T Unmanaged Switches to other Switches as well as to a network system Transmission Distances All ports of the switch are supporting 10 100 1000BaseT connections on Copper Category 5 unshie2. or disassemble the SOFTWARE Any transfer must include the most recent update and all prior versions Hardware S2Konnect GmbH warrants that the hardware will be delivered free from defect and in working condition S2Konnect GmbH does not assume liability for nor warrant damage to the hardware after delivery S2Konnect also does not warrant total applicability for specific applications or customer network environments Limited Warranty for Hardware and Software Limited Warranty S2Konnect warrants that the SOFTWARE will perform substantially in accordance with the accompanying Product Manual s for a period of 90 days from the date of receipt S2Konnect warrants that NETWORK INTERFACE CARDS will be free from defects in materials and workmanship under normal use and service for a period of 2 years from the date of receipt that NETWORK INFRASTRUCTURE COMPONENTS e g hubs Switches concentrators will be free from defects in materials and workmanship under normal use and service for a period of 2 years from the date of receipt and other HARDWARE for a period of 6 months from the date of receipt respectively This warranty is given by S2Konnect as producer of the PRODUCT possible legal warranty or liability claims against the dealer whom you have acquired your SOFTWARE or HARDWARE product from shall neither replaced by nor limited through this warranty Customer Remedies S2Konnect s entire liability and your exclusive remedy shall be at S2K
3. 3 Features The S2Konnect S 8180T Unmanaged Switches are designed for easy installation and high per formance in environments with varying traffic loads and multiple users Front Panel The front panel of the S2Konnect Unmanaged Switches consists of the power LED link and status LEDs and RJ 45 ports Se RS ee re a Bu a u EL u Figure 5 Front Panel of the S 8180T All 8 ports with RJ 45 connectors can negotiate full and half duplex modes automatically They may be connected to 10Base T 100Base T and 1000Base T devices i For the operation at 1000 Mbit s Gigabit Ethernet speed Category 5 cables must be used LEDs indicate the status of the S2Konnect Unmanaged Switches and the speed of transmission of each port SPO sro 1 2 3 t 5 6 7 g I EI 1 Fos HOX Figure 6 Location of the LEDs S2Konnect S 8180T KERN 13 The LEDs of the S2Konnect S 8180T Unmanaged Switches have the following meaning Marking on Color Description panel Power Off Power off Green On Power on Off SPD LNK No link established ACT Green 1000 MBit s link established no data is transferred Green Blinking 1000 MBit s link established and data is transferred Yellow On 10 MBit s link or 100 MBit s link established no data is transferred Yellow Blinking 10 MBit s link or 100 MBit s link established and data is transferred FD HDX Off Operation in half duplex mode On Operation in full duplex mod
4. In any case S2Konnect s entire liability shall be limited to the amount actually paid by you for the product Other This agreement is governed by the procedural and substantive laws of the State California U S A UN Trade Laws shall not be applicable in any case Should individual stipulations of this Agreement be or become invalid this invalid stipulation shall be replaced by a stipulation which is as close as possible to the invalid stipulation Should you have any questions concerning this Agreement or if you desire to contact S2Konnect GmbH for any reason please use the address information enclosed in this product or write to S2Konnect GmbH Siemensstrasse 23 76275 Ettlingen Germany U S Government Use Use duplication or disclosure by the United States Government is subject to restrictions as set forth in FAR 8 52 227 14 June 1987 Alternate III g 3 June 1987 FAR 52 227 19 June 1987 or DFARS 52 227 7013 1 June 1988 as applicable Contractor Manufacturer is S2Konnect S2Konnect S 8180T S2KONNECT 17 Europe Dear Customer if you acquired your S2Konnect product in EUROPE the following license and purchase agreement applies to you This is a legal agreement between you the end user and S2Konnect GmbH in Ettlingen Federal Republic of Germany S2Konnect License and Purchase Agreement By opening the sealed disk package and taking possession of the hardware you are agreeing to be bound by the
5. P Port LED Displays 4 Important Information Technical Support Returning an S2Konnect Unmanaged Switch of Repair Technical Specifications Appendix A License and Warranty Information The Americas Asia Australia New Zealand Pacific Europe Deutschland Schweiz Osterreich Lichtenstein NNNA A oO 10 10 11 12 12 12 13 13 13 13 13 13 13 14 16 16 17 18 S2Konnect S 8180T Table of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Wall Installation Rack Installation Connection of the RJ 45 cable plug Connection of Switches Front Panel of the S 8180T Rear Panel of the S2Konnect Unmanaged Switches Location of the LEDs S2Konnect S 8180T Safety Precautions To protect yourself from injuries and avoid damage to the S2Konnect S 8180T Unmanaged Switches always observe the following safety instructions Avoiding injuries Electrical current Electrical current from power phone and communications cables can be hazardous Never touch any electrical elements with bare hands To avoid potential shock hazards Do not carry out any installation maintenance or re configuration work during a thunderstorm e Do not connect or disconnect any power cables during a thunderstorm Unplug this device from its power source before cleaning Use only a slightly dampened label If you are not sure of the type of your local power supply c
6. SIKONNECT S2Konnect S 8180T Unmanaged Gigabit Ethernet Switch User Manual S2Konnect S 8180T SZDI lt ONNECT Copyright S2Konnect GmbH 2009 All rights reserved This manual refers to the S2Konnect S 8180T Unmanaged Switches Contents are subject to change without notice Product and brand names are registered trademarks of their appropriate owners If you have comments on this documentation please send to S2Konnect GmbH Siemensstrasse 23 76275 Ettlingen Germany http www s2konnect com S2Konnect S 8180T Sax NECT Conventions The following conventions apply to this manual Warning and Notes Used to indicate a potentially hazardous situation which if not avoided could result in death or serious injury Example dangerous voltage Used to indicate a potentially hazardous situation which if not avoided may result in minor or moderate injury Example electrostatic discharge Used for additional information and advice Ob D S2Konnect S 8180T Sa NECT Table of Contents Conventions Warning Notes Safety Precautions Avoiding injuries Avoiding damage 1 Installation of the S2Konnect Unmanaged Switch Installation on a Level Surface Installation on a Wall Installation in a Rack 2 Connection of the S2Konnect Unmanaged Switch Transmission Distances Connection to the Network Connection to other Switches 3 Features Type of Switch Front Panel Rear Panel RJ 45 Switch Ports SF
7. WORK INTERFACE CARDS will be free from defects in materials and workmanship under normal use and service for a period of 5 years from the date of receipt that NETWORK INFRASTRUCTURE COMPONENTS e g hubs Switches concentrators will be free from defects in materials and workmanship under normal use and service for a period of 2 years from the date of receipt and other HARDWARE for a period of 6 months from the date of receipt respectively Any implied warranties on the SOFTWARE are limited to 90 days to 5 years on the NETWORK INTERFACE CARDS to 2 years on the NETWORK INFRASTRUCTURE COMPONENTS and to 6 months on all other hardware This warranty is given by S2Konnect as producer of the PRODUCT possible legal warranty or liability claims against the dealer whom you have acquired your SOFTWARE or HARDWARE product from shall neither replaced by nor limited through this warranty Customer Remedies S2Konnect s entire liability and your exclusive remedy shall be at S2Konnect s option either return of the price paid or repair or replacement of the SOFTWARE or HARD WARE that does not meet S2Konnect s Limited Warranty and which is returned to S2Konnect with a copy of your receipt This Limited Warranty is void if failure of the SOFTWARE or HARDWARE has resulted from accident abuse or misapplication Any replacement SOFTWARE will be warranted by S2Konnect only for the remainder of the original warranty period or 30 days whichever is longer Any rep
8. age to the device S2Konnect S 8180T SA NECT 1 Installation of the S2Konnect Unmanaged Switch The installation of the S2Konnect S 8180T Unmanaged Switches is easy The unit may be used for rack wall or on table installation Installation on a Level Surface To install the S2Konnect Unmanaged Switch on a table or similar attach rubber feet on each marked location on the bottom of the device to avoid slipping of the device and scratches on the surface After putting in the power cord the green Power LED should light up gt please place the S2Konnect Unmanaged Switch on a robust level surface that can support at least 2 5kg 5 51b of weight Installation on a Wall To install the S2Konnect Unmanaged Switch on the wall proceed as follows 1 Attach the brackets at each side of the S2Konnect Unmanaged Switch using the supplied screws Figure 1 Wall Installation 2 Hold the S2Konnect Unmanaged Switch against the wall and mark the wall trough the holes of the brackets Drill holes in the wall for the brackets Hold the S2Konnect Unmanaged Switch against the wall ensuring that the drilled holes align with the holes of the brackets Insert a dowel not supplied to provide better support Screw the S2Konnect Unmanaged Switch on the wall using the supplied screws Tighten all screws Plug in the power cord Turn on the S2Konnect Unmanaged Switch The green Power LED should light up indicating that the power supply is
9. ble to the invalid stipulation Should you have any questions concerning this Agreement or if you desire to contact S2Konnect for any reason please use the address information enclosed in this product or write to S2Konnect GmbH Siemensstrasse 23 D 76275 Ettlingen Germany S2Konnect S 8180T S2KONNECT 18 Deutschland Schweiz Osterreich Liechtenstein Verehrte Kundin verehrter Kunde wenn Sie Ihr S2Konnect Produkt in DEUTSCHLAND in der SCHWEIZ in STERREICH oder in LIECHTENSTEIN erworben haben gilt f r Sie der folgende Lizenz und Kaufvertrag Dies ist ein rechtsg ltiger Vertrag zwischen Ihnen dem Endanwender und der S2Konnect GmbH mit Sitz in Ettlingen Bundesrepublik Deutschland S2Konnect Lizenz und Kaufvertrag Durch ffnen der versiegelten Diskettenpackung und durch die Inbesitznahme der Hardware erkl ren Sie sich an die Bestimmungen der nachfolgenden Vereinbarung gebunden Wenn Sie mit den Bestimmungen dieses Vertrages nicht einverstanden sind geben Sie bitte die Diskettenpackung und die Hardware unge ffnet und unbenutzt mit den Begleitgegenst nden einschlie lich aller schriftlichen Unterlagen und dem sonstigen Zubeh r unverz glich gegen volle R ckerstattung des Preises an die Stelle zur ck von der Sie sie bezogen haben Einr umung einer Software Lizenz Diese S2Konnect Lizenzvereinbarung Lizenz gibt Ihnen die Berechtigung eine Kopie des S2Konnect Software Produktes das mit dieser Lizenz Software e
10. e Blinking Collision detected at the port Rear Panel The rear panel accommodates the plug socket for connection of a standard three pin power plug The S2Konnect Unmanaged Switches automatically adjust their power setting to any supply voltage in the range of 100 to 240 VAC at 50 60 Hz Figure 7 Rear Panel of the S2Konnect S 8180T Power consumption 0 75A 100V Important Information Technical Support If you encounter any problems read the relevant section of the manual If you cannot solve your problems consult our technical support If you contact our technical support engineers have the following information ready e switch type e configuration of your network e type of cabling e system documentation Our support team can be reached following the instructions on our website Please go to www s2konnect com support section You will also find the procedure for returning a switch for repair on that section S2Konnect cannot accept any returned product without an RMA number on the outer packaging The warranty does not apply to products that have been damaged by electrostatic discharge or inadequate packaging S2Konnect S 8180T SA NECT Product Highlights e 1 9 Million packets second forwarding rate e Up to 16 Gbit s switching capacity Up to 4 000 MAC Addresses SysKonnect SK 8T08 compatible Features gt 8 Ports 10 100 1000Base T Auto MDI MDI X Auto negotiation 128 KB pack
11. e internationale Vertr ge und andere nationale Rechtsvorschriften gegen Kopieren gesch tzt Wenn die Software nicht mit einem technischen Schutz gegen Kopieren ausgestattet ist d rfen Sie entweder eine einzige Kopie der Software ausschlie lich f r Sicherungs oder Archivierungszwecken machen die Software auf eine einzige Festplatte bertragen sofern Sie das Original ausschlie lich zu Sicherungs und Archivierungszwecken aufbewahren Sie d rfen weder die Handb cher des Produktes noch anderes schriftliches Begleitmaterial zur Software oder Hardware kopieren Weitere Beschr nkungen Sie d rfen die Software oder Hardware weder vermieten noch verleihen aber Sie d rfen die Rechte aus diesem S2Konnect Lizenzund Kaufvertrag auf Dauer auf einen an deren bertragen vorausgesetzt dass Sie alle Kopien der Software und das gesamte schriftliche Begleitmaterial bertragen und der Empf nger sich mit den Bestimmungen dieses Vertrages einverstanden erkl rt Zur ckentwickeln Reverse Engineering Dekompilieren und Entassemblieren der Software sind nicht gestattet Eine bertragung mu die letzte aktuelle Version Update und alle fr heren Versionen umfassen Hardware Mit der Inbesitznahme bergabe dieser Hardware geht die Gefahr auf Sie den Endanwender ber Eigenschaften wurden nicht zugesichert Beschr nkte Garantie f r Hardware und Software S2Konnect garantiert f r einen Zeitraum von 90 Tagen ab Empfangsdatum dass die Software
12. et buffer memory 2 priority queues per port gt Honors 802 1p values and honor IP DSCP values Weighted Round Robin WRR scheduling across queues 1U desktop Wall or rack mounting Standard Compliances IEEE 802 3 10 100 1000Base T IEEE 802 3x mit Flow control Auto negotiation IEEE 802 1p Quality of Service IEEE 802 3ab Gigabit Ethernet standards Safety Standards e CSA CB CE UL gt CE Class A FCC Class B Environmental Specifications Storage 20 to 70 C 4 to 158 F 10 to 95 Relative Humidity non condensing Operating 0 to 40 C 32 to 104 F 10 to 90 Relative Humidity non condensing S2Konnect S 8180T 2 lt IN NEET S 8180T 8 Port Gigabit Ethernet Switch RoHS other e RoHS compliant Dimension e 44x266x162 mm 1 7x10 5x6 4 High Width Deep Weight e Unit 1 45 kg packet 2 35 kg Warranty e 2 Years Order numbers e 100 001 001 008 Copyright 2009 S2Konnect Germany All rights reserved All brand and product names are trademarks S2Konnect GmbH or registered trademarks of their respective holders Siemensstrasse 23 Specifications are subject to change without notice D 76275 Ettlingen Phone 49 7243 3435725 Fax 49 7243 3435723 E mail sales s2konnect de www s2konnect com S2Konnect S 8180T S2 lt ONNECT 16 Appendix A License and Warranty Information The Americas Asia Au
13. lacement HARDWARE will be warranted for the remainder of the original warranty period or 6 months whichever is longer No other Warranties S2Konnect disclaims all other warranties or liabilities with respect to the SOFTWARE the HARDWARE the accompanying Product Manual s and other written materials and any other accessories No Liability for Consequential Damages S2Konnect does not warrant the software and Hardware for a specific application nor does S2Konnect accept any consequential damages due to the use of the hardware or software S2Konnect and its suppliers shall not be liable for any other damages whatsoever including without limitation damages for loss of business profits business interruption loss of business information or data property loss or other pecuniary loss arising out of the use of or the inability to use this S2Konnect product even if S2Konnect has been advised of the possibility of such damages In any case S2Konnect s entire liability shall be limited to the amount actually paid by you for the product Other This agreement is governed by the procedural and substantive laws of the Federal Republic of Germany UN Trade Laws shall not be applicable in any case Place of litiga tion is Karlsruhe FRG as far as this can be agreed upon operatively in this way Should individual stipulations of this Agreement be or become invalid this invalid stipulation shall be replaced by a stipulation which is as close as possi
14. lded twisted pair cable with a maximum distance of 100m Connection to the Network You can connect the S2Konnect S 8180T Unmanaged Switches to a network station or even uplink them to a network server Thus by connecting smaller network segments through a switch you can expand the transmission range of your overall network In order to connect the S2Konnect Unmanaged Switch to a network proceed as follows 1 If possible disconnect the S2Konnect Unmanaged Switch from the power supply 2 At one end of the cable connect the RJ 45 connector to the port on the S2Konnect Unmanaged Switch see figure 3 K T 1 o E I FDX i 00 8s o vo ry e 8 oop 1 2 Figure 3 Connection of the RJ 45 plug 3 At the other end of the cable connect the connector to the port on the network device The port type e g 1000Base T on the network device and that in the S2Konnect Unmanaged Switch must be identical Reconnect the S2Konnect Unmanaged Switch to the power supply Turn on the network device and the S2Konnect Unmanaged Switch Check the SPD LNK ACT LED belonging to the port you plugged in the plug to find out if the cable is connected correctly If the LED is on the connection is established and active Otherwise you have to check the S2Konnect Unmanaged Switch more closely for details refer to section LED Displays on page 13 Ouse S2Konnect S 8180T SA NECT 11 Connection to other Swi
15. onnect s option either return of the price paid or repair or replacement of the SOFTWARE or HARD WARE that does not meet S2Konnect s Limited Warranty and which is returned to S2Konnect GmbH with a copy of your receipt This Limited Warranty is void if failure of the SOFTWARE or HARDWARE has resulted from accident abuse or misapplication Any replacement SOFTWARE will be warranted by S2Konnect GmbH only for the remainder of the original warranty period or 30 days whichever is longer Any replacement HARDWARE will be warranted for the remainder of the original warranty period or 6 months whichever is longer No other Warranties S2Konnect GmbH disclaims all other warranties or liabilities with respect to the SOFTWARE the HARDWARE the accompanying Product Manual s and other written materials and any other accessories No Liability for Consequential Damages S2Konnect GmbH does not warrant the software and hardware for a specific application nor does S2Konnect GmbH accept any consequential damages due to the use of the hardware or software S2Konnect GmbH and its suppliers shall not be liable for any other damages whatsoever including without limitation damages for loss of bu siness profits business interruption loss of business information or data property loss or other financial loss arising out of the use of or the inability to use this S2Konnect GmbH product even if S2Konnect GmbH has been advised of the possibility of such damages
16. onsult your dealer or the local power company s Do not pinch crimp or otherwise damage the power cord If exposed to foot traffic en sure that the cable is properly shielded and does not pose a tripped hazard If using an extension cord make sure the total ampere rating of the products using the cord does not exceed the extension cord s ampere rating Do not attempt to service this device as opening or removing casing may expose you to dangerous voltage points or other risks Refer all servicing to qualified service personnel e The S2Konnect S 8180T Unmanaged Switches should be serviced by qualified service personnel under the following conditions e The power cord is damaged or frayed e Liquid has been spilled onto the product e The product has been exposed to rain or water e The product does not operate normally in accordance with the operating instructions operated Avoiding damage e The device has been dropped or the casing had been damaged Electrical installations must comply with the safety regulations of the country in which they are AN Electrostatic discharge Electrostatic discharge may damage or destroy the S2Konnect S 8180T Unmanaged Switches To avoid damaging the S2Konnect S 8180T Unmanaged Switches observe the following 7 Never use force when working with the S2Konnect Unmanaged Switches e Do not place the S2Konnect Unmanaged Switches on an unstable surface The device may fall causing serious dam
17. rworben wurde auf einem Einzelcomputer unter der Voraussetzung benutzen dass die Software zu jeder beliebigen Zeit auf nur einem einzigen Computer verwendet wird Wenn Sie Mehrfachlizenzen f r die Software erworben haben d rfen Sie immer nur h chstens so viele Kopien in Benutzung haben wie Sie Lizenzen besitzen Die Software ist auf einem Computer in Benutzung wenn Sie in den Zwischenspeicher d h RAM geladen oder in einem Permanentspeicher z B einer Festplatte oder einer anderen Speichervorrichtung dieses Computers gespeichert ist mit der Ausnahme dass eine Kopie die auf einem Netzserver zu dem alleinigen Zweck der Verteilung an andere Computer installiert ist nicht in Benutzung ist Wenn die voraussichtliche Zahl der Benutzer der Software die Zahl der erworbenen Lizenzen bersteigt m ssen Sie an gemessene Mechanismen oder Verfahren bereithalten um sicherzustellen dass die Zahl der Personen die die Software gleichzeitig benutzen nicht die Zahl der Lizenzen bersteigt Wenn die Software permanent auf einer Festplatte oder einer anderen Speichervorrichtung eines Computers der kein Netzserver ist installiert wird und eine einzige Person diesen Computer zu mehr als 80 der Zeit benutzt die er in Benutzung ist darf diese eine Person die Software auch auf einem tragbaren Computer oder einem Heimcomputer benutzen Urheberrecht Die Software ist Eigentum von S2Konnect oder deren Lieferanten und ist durch Urheberrechtsgesetz
18. soweit die technischen Voraussetzungen hierf r von Ihnen geschaffen wurden im wesentlichen gem der begleitenden Dokumentation arbeitet S2Konnect garantiert f r Netzwerkadapterkarten f r einen Zeitraum von 5 Jahren Infrastruk turkomponenten z B Konzentratoren Hubs Switches f r einen Zeitraum von 2 Jahren und die sonstige Hardware f r einen Zeitraum von 6 Monaten ab Empfangsdatum dass die gelieferte Hardware bei normaler Benutzung und Wartung frei von Material oder Verarbeitungsfehlern ist Die Garantie ist bez glich der Software auf 90 Tage bez glich der Netzwerkadapter auf 5 Jahre f r Infrastrukturkomponenten auf 2 Jahre und bez glich der sonstigen Hardware auf 6 Monate beschr nkt Diese Garantie wird von S2Konnect als Hersteller des Produktes bernommen etwaige gesetzliche Gew hrleistungs oder Haftungsanspr che gegen den H ndler von dem Sie Ihr Exemplar der Software oder Hardware bezogen haben werden hierdurch weder ersetzt noch beschr nkt S2Konnect S 8180T S2KONNECT
19. stralia New Zealand Pacific Dear Customer if you acquired your S2Konnect product in the UNITED STATES CANADA or any other country in the AMERICAS ASIA AUSTRALIA NEW ZEALAND PACIFIC the following license and purchase agreement applies to you This is a legal agreement between you the end user and S2Konnect Incorporated in Ettlingen Federal Republic of Germany S2Konnect GmbH License and Purchase Agreement By opening the sealed disk package and taking possession of the hardware you are agreeing to be bound by the terms of this Agreement If you do not agree to the terms of this Agreement promptly return the unopened and unused disk package and hardware with the accompanying items including all written materials and other accessories to the place of purchase for a full refund Grant of Software License This S2Konnect GmbH License Agreement License permits you to use one copy of the S2Konnect GmbH software product acquired with this License SOFTWARE on any single computer provided the SOFTWARE is in use on only one computer at any time If you have multiple Licenses for the SOFTWARE then at any time you may have as many copies of the SOFTWARE in use as you have Licenses The SOFTWARE is in use on a computer when it is loaded into the temporary memory i e RAM or installed into the permanent memory e g hard disk or other storage device of that computer except that a copy installed on a network server for the sole p
20. tches The S2Konnect Unmanaged Switch can be connected directly to the port of another switch or hub as each port of the S2Konnect Unmanaged Switch supports Auto MDI and MDIX functiona lities In order to connect two Switches with one another proceed as follows 1 If possible disconnect the Switches from the power supply 2 At one end of the cable connect the RJ 45 connector to the port on the S2Konnect Unmanaged Switch see figure 4 SPD eeeeeece Wy 223648 amp 7 e ee oe ee ee oe FOX Figure 4 Connection Switches 3 At the other end of the cable connect the connector to the port of the other switch The port type e g 1000Base T of both Switches must be identical Reconnect both Switches to the power supply Turn on the Switches At the S2Konnect Unmanaged Switch check the SPD LNK ACT LED belonging to the port you plugged in the plug to find out if the cable is connected correctly If the LED is on the connection is established and active Otherwise you have to check the S2Konnect Unmanaged Switch more closely for details refer to section LED Displays on page 13 If possible check the LED on the other switch in the same manner If the LED should not light up refer to the appropriate switch manual to find the error Qasr Keep attention to use only one cable to connect two Switches The use of multiple cables can create a loop and cause collisions S2Konnect S 8180T SA NECT 12
21. terms of this Agreement If you do not agree to the terms of this Agreement promptly return the unopened and unused disk package and hardware with the accompanying items including all written materials and other accessories to the place of purchase for a full refund Grant of Software License This S2Konnect License Agreement License permits you to use one copy of the S2Konnect software product acquired with this License SOFTWARE on any single computer provided the SOFTWARE is in use on only one computer at any time If you have multiple Licenses for the SOFTWARE then at any time you may have as many copies of the SOFTWARE in use as you have Licenses The SOFTWARE is in use on a computer when it is loaded into the temporary memory i e RAM or installed into the permanent memory e g hard disk or other storage device of that computer except that a copy installed on a network server for the sole purpose of distribution to other computers is not in use If the anticipated number of users of the SOFTWARE will exceed the number of applicable Licenses then you must have a reasonable mechanism or process in place to assure that the number of persons using the SOFTWARE concurrently does not exceed the number of Licenses If the SOFTWARE is permanently installed on the hard disk or other storage device of a computer other than a network server and one person uses that computer more than 80 of the time it is in use then that person ma
22. urpose of distribution to other computers is not in use If the anticipated number of users of the SOFTWARE will exceed the number of applicable Licenses then you must have a reasonable mechanism or process in place to assure that the number of persons using the SOFTWARE concurrently does not exceed the number of Licenses If the SOFTWARE is permanently installed on the hard disk or other storage device of a computer other than a network server and one person uses that computer more than 80 of the time it is in use then that person may also use the SOFTWARE on a portable or home computer Copyright The SOFTWARE is owned by S2Konnect GmbH or its suppliers and is protected against copying by copyright laws international treaty provisions and other national laws If the SOFTWARE is not copy protected you may either make one copy of the SOFTWARE solely for backup or archival purposes or transfer the SOFTWARE to a single hard disk provided you keep the original solely for backup or archival purposes You may not copy the Product Manual s or written materials accompanying the SOFTWARE or HARDWARE Other Restrictions You may not rent or lease the SOFTWARE or HARDWARE but you may transfer your rights under this S2Konnect GmbH License and Purchase Agreement on a permanent basis provided you transfer all copies of the SOFTWARE and all written materials and the recipient agrees to the terms of this Agreement You may not reverse engineer decompile
23. y also use the SOFTWARE on a portable or home computer Copyright The SOFTWARE is owned by S2Konnect or its suppliers and is protected against copying by copyright laws international treaty provisions and other national laws If the SOFTWARE is not copy protected you may either make one copy of the SOFTWARE solely for backup or archival purposes or transfer the SOFTWARE to a single hard disk provided you keep the original solely for backup or archival purposes You may not copy the Product Manual s or written materials accompanying the SOFTWARE or HARDWARE Other Restrictions You may not rent or lease the SOFTWARE or HARDWARE but you may transfer your rights under this S2Konnect License and Purchase Agreement on a permanent basis provided you transfer all copies of the SOFTWARE and all written materials and the recipient agrees to the terms of this Agreement You may not reverse engineer decompile or disassemble the SOFTWARE Any transfer must include the most recent update and all prior versions Hardware The risk passes to you the end user upon taking possession hand over of the HARDWARE Total qualities were not warranted Limited Warranty for Hardware and Software Limited Warranty S2Konnect warrants that the SOFTWARE will perform substantially in accordance with the accompanying Product Manual s for a period of 90 days from the date of receipt if you have created the required technical preconditions S2Konnect warrants that NET
Download Pdf Manuals
Related Search