user and maintenance manual
Contents
1. diagrams at the end of this manual SAFETY RULES At the time of use maintenance or scrapping of the appliance always ensure that the following elementary precautions are adhered to Read the explanatory instructions in full INSTALLATION AND HANDLING It is prohibited to hold the appliance by the rod 1 or locking lever 2 The appliance can be installed by one person alone For ease of use you are advised to place the appliance on a table or work surface to easily add the ingredients or to monitor the progress recommended height 90 cm to be adapted as required for the user DO NOT Plunge the base in water or any other liquid for reasons of protection against risks of electrocution Use this applicable to blend grind or emulsify anything other than foodstuffs The appliance is not designed for processing frozen foods Do not insert solid ingredients into the mixer before switching it on Do not operate the appliance with the jar empty Do not remove the jar until the blades have stopped completely Never leave water permanently in the jar Neither a water spray or a pressure spray should be used for cleaning Use of spare parts other than certified original SANTOS parts is prohibited 10 Never use the appliance if the power cord is damaged 11 Never use the appliance if the blades are broken or damaged 12 Never attempt to change the blades with the jar on the base 13 Be careful not to get bu2. the appliance unplug the cord from the mains socket and call in the maintenance service or contact a SANTOS approved dealer The machine will not start e Check the mains supply the condition of the power cord e Torun the motor of the mixer the jar 6 with its lid 7 closed must be placed on the base 4 and locked using the clamping rod 1 e Check that there is no food that is too hard or big jamming the blades 10 The appliance stops following an overload e f the motor stalls during operation reduce the load allow the appliance to cool down for several tens of minutes e Check that there is no food that is too hard or big jamming the blades 10 The motor runs but the blades do not rotate e Check the condition of the coupling system If required change the 2 parts at the same time note warning the screwing direction of the fixing screws are not the same see maintenance section 98137 EN 2 2 12 2010 ay www santos fr APPLIANCE TECHNICAL SPECIFICATIONS accuracy K pa 2 5dB Model n 37 Power supply voltage V 220 240 110 120 Frequency Hz 50 60 50 60 Motor Input power W 750 750 Max current A 9 14 Speed rpm 0 to 15000 2L jar capacity L 2 4L jar capacity L 4 Dimensions Height mm 615 Width mm 215 Depth mm 230 Weight Net weight kg 12 Packaged weight kg 14 Noise 2 Lpa dBA 66 1 These ratings are give
3. to materials and articles intended to come into contact with foodstuffs O O O O Harmonised European standards used to give presumption of conformity with the essential requirements of the above mentioned directives e NF EN 12852 A1 2010 Food processing machinery Food preparation equipment and blenders Safety and hygiene requirements This European standard is a type C standard as defined in EN ISO 12100 When the provisions of this type C standard differ from those stated in the type A or B standards the provisions of the type C standard override the provisions of the other standards This standard provides the means to comply with the requirements of the Machines directive n 2006 42 CE see appendix ZA e NEEN ISO 12100 1 and 2 2004 Safety of machinery General principles for design e NF EN 60204 1 2006 Safety of machinery Electrical equipment of machines General requirements e NF EN 1672 2 2005 Food processing machinery Basic concepts Hygiene requirements e NF EN 60335 1 2003 Household and similar electrical appliances Safety e NF EN 60335 2 64 2004 Particular requirements for commercial electric kitchen machines Drawn up in VAULX EN VELIN on 01 01 2010 Signatory s position CHIEF EXECUTIVE OFFICER Signatory s name Aurelien FOUQUET paya SCH Signature 9 98137 EN 2 2 12 2010 AA www santos fr Note you will find it easier to understand the next few paragraphs if you refer to the
4. 12 2010 ay www santos fr Loosening direction of screw motor end clockwise 98137 EN 2 2 12 2010 BING O1 CH RM Loosening direction of screw jar end counter clockwise www santos fr e Y sanos J WARRANTY CERTIFICATE WARRANTY Since the 01 01 95 all our appliances comply with CE and possess the CE label Our guarantee is of 24 months from the manufacturing date mentioned on the descriptive plate except concerning the asynchronous motors consisting of a rotor and a stator which are warranted for 5 years from their manufacturing date Warranty is strictly limited to the free replacement of any part of origin recognized by us as defective due to a defect or building default and identified as belonging to the concerned appliance Warranty does not apply to damages resulting from installation or use non complying with our appliance data sheet users manual or in case of an evident lack of maintenance or disrespect of elementary security electric rules It does not apply in case of regular wear and tear Any replacement of parts under warranty will be realized after return of the defective part in our workshops postage paid supported by a copy of a conformity statement on which appears the serial number of the appliance Every appliance is equipped with a descriptive plate conforming to the EC recommendations and of which a duplicate exists in the conformity statement serial number manufacturing date electrical c
5. Ratan ped VE 7 lie E ele Kieler 7 EEE EEE 7 Making EENEG 7 CLEANING ossaa eee oo no AEE EEEE EEEE ob non 8 MAINTENANCE E 9 Changing the coupling system EEN 9 Sore 1 oe LES eae nee nee oe aa nee en eee ee een eee 10 FAULT FINDING saga AA NAN NAAN AA AO HAAN 10 The machine ele EE 10 The appliance stops following an overload 10 The motor runs but the blades do not rotate 10 APPLIANCE TECHNICAL SPECIFICATIONS iii 11 Electrical wiring diagram un 12 110 120V 50 60HZ wiring diagram ss 12 220 240V 50 60Hz wiring diagram cceecceeeeeeeee eee eeeeeeeeeaeeeeeeeeeeeeeeeenaeeeeeeeeeeeneeee 13 ek AA O a aaO aa a A a E G 14 WARRANTY CER IFICATE eeneg 15 APPLIANCE IDENTIFICATION PLATE nes 15 98137 EN 2 2 12 2010 AA www santos fr CE COMPLIANCE DECLARATION THE MANUFACTURER SANTOS sas 140 150 Av Roger SALENGRO 69120 VAULX EN VELIN LYON FRANCE declares that the appliance intended for the professional market described below Description MIXER Type number 37 37C complies with e the statutory provisions defined in appendix 1 of the European machines directive n 2006 42 CE and the national legislation transposing it e the statutory provisions of the following European directives and regulations o N 2006 95 CE low voltage directive N 2004 108 CE EMC directive No 2002 95 CE RoHS directive No 2002 96 CE WEEE directive N 1935 2004 CE regulation relating
6. SANTOS SAS 140 150 AVENUE ROGER SALENGRO 69120 VAULX EN VELIN LYON FRANCE PHONE 33 0 472 37 35 29 FAX 33 0 478 26 58 21 SANTOS E Mail santos santos fr www santos fr 2 amp 4 LITER MIXER N 37 USER AND MAINTENANCE MANUAL IMPORTANT documents included in this manual to be kept e CE COMPLIANCE DECLARATION e WARRANTY CERTIFICATE Bol 2 liters Bol 4 liters Read the instructions for use before unpacking the appliance Coffee grinders Fruit juicers Mixers Blenders Drinks dispensers Planetary mixers Cheese graters Ice crushers Mincers Vegetable slicers Dough mixer Moulins a caf Presse fruits Mixers Blenders Distributeurs de boissons Batteurs m langeurs P trin Rapes fromage Broyeurs gla ons Hache viande Coupe l gumes MODELES DEPOSES FRANCE ET INTERNATIONAL INTERNATIONALLY PATENTED MODELS 98137 EN 2 2 12 2010 A www santos fr CONTENTS CE COMPLIANCE DECLARATION E 3 SAFETY RULES ann nn oo uno ion ions 4 INSTALLATION AND HANDLING ns san ae EE NGANGA 4 PO NOT aaa ba ane din oo ANAND 4 ELECTRICAL CONNECTIONS sssssssminenennssnneerrsenmnnnennisnenemenenneniseneneeses 4 ERT 5 RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE eee 5 DESCRIPTION GE APPLIANCE E 6 USING THE APPLIANCE aasa AAO AAP AAP AA AA 6 USING FOR THE fst TIME aaa E E 6 Locking the jar clamping Onda dede ein 6 le SES E EA A E E ade cietencalae caer 7 Stopping hee Ee 7
7. e waste sorting system relating to waste electrical and electronic equipment This means that this product is covered by a selective sorting system in compliance with the 2002 96 CE Directive WEEE part relating to appliances for professional use so as to be either recycled or dismantled with a view to reducing any impact on the environment For further information you can contact SANTOS or your local dealer For the disposal or recycling of the appliance components please refer to a specialist company or contact SANTOS Electronic products not covered by a selective sorting system are potentially dangerous for the environment The packaging material should be disposed of or recycled in accordance with regulations in force 98137 EN 2 2 12 2010 AA www santos fr Q santos d DESCRIPTION OF APPLIANCE Mixer N 37 is an electrical appliance designed to blend grind and mix different foodstuffs in the form of liquids doughs batters or solids The most common applications relate to the following preparations e COOKING soups cream soups sauces creams mousses pur es p t s souffles e DESSERTS creams stewed fruit batters milk shakes flans mousses e DRINKS fruit vegetable cocktails punches syrups sangria USING THE APPLIANCE Do not operate the appliance with the jar empty USING FOR THE 1st TIME Locking the jar clamping rod For your safety the appliance ca
8. haracteristics In case of serious damage judged repairable only in our workshops and after prior consent from our departments any appliance under guarantee is sent by the Distributor carriage paid In case of repairs or reconditioning of appliances not under guarantee the round trip transport is payable by the distributor The parts and workforce are invoiced at the current rate A preliminary estimate can be supplied Coffee grinder not using SANTOS original burrs are not taken under guarantee The warranty conditions repairs reconditioning of the espresso coffee grinder are the object of a specific note Our guarantee does not extend to the payment of penalties the repair of direct or indirect damages and notably to any loss of income resulting from the nonconformity or the defectiveness of products SANTOS s global responsibility being limited to the sale price of the delivered product and to the possible repair of the defective products In case of revelation of an imperfection during the warranty period the Distributor has to unless a different written agreement of SANTOS indicate to his customer to stop any use of the defective product Such a use would release SANTOS of any responsibility APPLIANCE IDENTIFICATION PLATE SPECIMEN For all documents not supplied with appliance l l Printed Faxed Downloaded 98137 EN 2 2 12 2010 ay www santos fr
9. lready mixed or pur ed in the jar Ice Do not use the blades to crush blocks of ice Small ice cubes like those produced by the majority of automatic ice makers can be crushed at low speed Making a mayonnaise Put all the ingredients in the jar except for the oil During operation remove the cap 8 from the lid and add the oil a little at a time pouring it in evenly 98137 EN 2 2 12 2010 AA www santos fr CLEANING Q santos d Be careful not to get cut when handling the blades or cleaning inside the jar IMPORTANT You are advised to clean the appliance as soon as you have finished using it It will be easier to clean if you do not allow the remaining scraps of food to dry For thorough cleaning take apart the parts of the jar unscrew the jar 6 from the handle base 5 and wash them with hot soapy water rinse and dry The base can be cleaned using a soft wet sponge 98137 EN 2 2 12 2010 Stop the appliance and unplug the power cord from the appliance The appliance should neither be cleaned in a water spray nor with a pressure spray The motor unit 4 must not be immersed in water Do not use an abrasive sponge to clean the plastic jar 6 Do not hermetically close the jar when the appliance is stored away remove the cap 8 from the lid ABA www santos fr SS santos d MAINTENANCE Prior to carrying out any intervention on the appliance it must be disconnected from the mai
10. n for your guidance The exact electrical specifications of your appliance can be found on the rating plate 2 Noise level measured in acoustic pressure of appliance loaded as per the standard ISO 11201 1995 and ISO 4871 1996 Appliance placed on a work surface at 75cm from the floor Microphone turned towards the appliance at 1 6 m from the floor and 1 m from the appliance ITEM Description 1 Clamping rod 2 Locking lever 3 Switch speed adjustment 4 Motor unit 5 Jar handle 6 Jar 7 Lid 8 Cap of lid 9 Lid seal 10 Blade assembly 11 Flexible motor coupling 12 Rigid jar coupling 13 Motor coupling screw 14 Blade coupling screw 98137 EN 2 2 12 2010 Ah www santos fr Electrical wiring diagram 110 120V 50 60Hz wiring diagram Knob Speed regulation 100 120 Volts Handle switch Black INTERFERENCE FILTER Brown gt Orange R Black Purple rey ka White White Resistor 1 5 KQ E KE White Grey L Orange ELECTRONIC CONTROL UNIT Grey 98137 EN 2 2 12 2010 AA www santos fr 220 240V 50 60Hz wiring diagram Knob Speed adjustment 220 240 Volts Handle switch Brown Oranae N Grey Grey White Black A labas j White Orange Purple VA Black INTERFERENCE FILTER Brown Orange UN Grey Black White NO Purple A White d White 8 1 m Orange Grey ELECTRONIC CONTROL UNIT 98137 EN 2 2
11. n only operate when the jar 6 is closed by its lid 7 and correctly positioned on the base 4 Push the lever 2 to the Left to lock or to the Right to unlock the jar clamping rod 1 When in the unlocked position rod in top position place the jar closed by its lid on the base 4 Turn the lever 2 to the Left to lock the jar 6 rod in lower position Turn the rotary switch 3 to start up the motor and set the desired speed Lever in Lever in Locked position Unlocked position 98137 EN 2 2 12 2010 ABA www santos fr Operation The mixer must always operate with a minimum of liquid in the jar in order to drive solid foods towards the blades Stopping the appliance There are two ways to stop the appliance 1 Tum the rotary switch 3 to O to stop the motor completely then operate the rod locking lever 2 to release the jar Wait until the blades have stopped completely before removing the jar from the base 2 During operation at a set speed turn the lever 2 to the Right to unlock the clamping rod 1 This operation will stop the appliance without altering the speed adjustment Rotation speed The rotation speed of the blade must be adapted to the results desired and the type of foodstuffs to be processed Mixing solid foods Dice up dry ingredients and insert them through the opening in the lid 7 when the appliance is in operation Increase the size of the cubes according to the quantity of food a
12. ns without fail Changing the coupling system When changing the couplings make sure you adhere to the position of each component e flexible coupling 11 on the motor unit e rigid coupling 12 on the blade holder IMPORTANT Motor end The fixing screw 13 for the Flexible coupling 11 is changed over Turn it clockwise to loosen it Blade end Turn it counter clockwise to loosen the fixing screw 14 of the rigid coupling 12 Note identify the screws well so as not to mix them up when reassembling Loosening direction of fixing Loosening direction of fixing screw motor end clockwise screw jar end counter clockwise 98137 EN 2 2 12 2010 Aa www santos fr Spare parts IMPORTANT use of spare parts other than certified original SANTOS parts is prohibited This machine requires no specific maintenance The bearings are lubricated for life If any intervention is necessary to replace parts subject to wear such as the couplings blades jar seals electrical or other components please refer to the parts lists see the exploded view at the end of this manual For all spare part orders see references in the exploded view at the end of the manual state gt the type gt the appliance serial number and gt the electrical specifications given under the appliance FAULT FINDING Identifying the cause of appliance stoppage with precision If the problem persists switch off the power supply to
13. rnt when preparing hot products The surfaces of the jar and lid may be very hot ND UE DN ELECTRICAL CONNECTION e The appliance s power supply is available in two single phase voltages 110 120 V 50 60 Hz 220 240 V 50 60 Hz 98137 EN 2 2 12 2010 AA www santos fr Line protection the appliance must be connected to a standard 2 pole earth socket The set up must be fitted with a differential circuit breaker and a 16A fuse Earthing of the appliance is compulsory TAKE CARE e Before connecting the appliance check that the mains electrical voltage is the same as the voltage for your appliance Its value is shown gt either on the identification plate under the appliance gt or on the identification plate on the last page of this manual e f the power cord is damaged it should be replaced with a special unit available from SANTOS or a SANTOS approved dealer TAKE CARE Check that the on off switch 3 is in position 0 Off before plugging the power cord in to the mains power socket B 1st TIME USE Be careful not to get cut when handling the blades or cleaning inside the jar gt Thoroughly clean all parts in contact with the food Wash the following with a standard dish washing product jars 6 lids 7 caps 8 You are not advised to wash the lid seals 9 in a dishwasher RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE This appliance is marked with the symbol of the selectiv
Download Pdf Manuals
Related Search