User Manual
Contents
1. D V 5 6 0 aA 3 lt lt Eo p 7 de a apa DIGITAL PEG NE24 IP amp PEG NE24 IP C Models Public Educational amp Governmental Access Encoder INSTRUCTION MANUAL PEG NE24 IP CONTROL RESET POWER INPUT ENCODING OUTPUT e 10 100 Item Description PEG NE24 IP 1002606 HD PEG Channel Encoder with HD SDI Input and IP Output PEG NE24 IP C 1002613 HD PEG Channel Encoder with HD SDI or Composite Video Input with L R Audio and IP Output 937 746 4556 www ridrake com 2015 R L Drake Holdings LLC Rev 091515 651237100C We recommend that you write the following information in the spaces provided below Purchase Location Name Purchase Location Telephone Number PEG NE24 Serial Number This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Reverse engineering or disassembly is prohibited Manual Revision This instruction manual was updated on 08 07 15 to be current for PEG encoders having firmware release Version 2 0 1 Some of the new features added on this F W release include Provision for licensing additional add on features Added ability to stream from Control Port with SFP off e Improved robustness towards SDI sources with invalid audio phase information Closed Captioning bug fixed e Status reporting for fiber SFP module2. 23 FIRMWARE UPDATE TAB au ee au ea E 24 SERVIC HR PR THYN YR FY FFF E E EE E 26 WARRANT fc cee HT AT I NR ER HWN HE ENI HR HE EE dn 27 937 746 4556 www rldrake com 3 Caution Statements WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE TO RAIN OR MOISTURE Caution Statements A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Thelightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL WARNING THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE 10 11 12 4 WARNING REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT RAIN MOISTURE DO NOT OPEN THE CABINET REFER SERVI
3. CALL THE CATV SYSTEM INSTALLER S ATTENTION TO ARTI CLE 820 40 OF THE NEC THAT PROVIDES GUIDE LINES FOR PROPER GROUNDING AND IN PAR TICULAR SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING AS CLOSE TO THE GROUND DHSCHARZGE UNIT REC SECTION 310 297 CONDUCTORS ELECTRIC SS SECTION 210 211 SERVICE ff EQUIPMENT A GROUND CLAMPS ROWER IN DING BTR OE SYSTEM IHEC ART 3550 PART HI NEC NATIONAL ELECTRIC CODE Exame of antenna grounding as per National Electrical Code 937 746 4556 www rldrake com Specifications PEG NE24 IP 1002606 HD PEG Encoder with HD SDI Input and IP Output INTERFACE VIDEO INPUTS SD HD SDI BNC Type Input Connection Closed Caption Support embedded only AUDIO INPUTS SD HD SDI with PCM Embedded Audio VIDEO OPTIONS INPUT VIDEO MODES 480i 640x480 720x480 Q 30FPS 720p 1280x720 60FPS 1080i 1920x1080 Q30FPS AUTO SCAN for Input Resolution VIDEO FORMAT MPEG 2 OR H 264 H 264 PROFILE SUPPORT Baseline Main High AUDIO OPTIONS ENCODER FORMAT Dolby Digital or MPEG1 Layer 2 OUTPUT BITRATE 128 192 320 or 384 Kbps NOTE 320kbps is an option for audio bitrate in MP2 and AAC only Manufactured under license from Dolby Laboratories OUTPUT VIDEO OUTPUT SFP Port IP SPTS SFP modu
4. 2 2 z J HD Video Bitrate Mbps 2 k aE LI Video Mode Flags Frame Only Aspect Ratio Audio Settings Audio Encoder Format Audio DialNorm 27 dB Audio Bitrate 128 kbps Transport Stream Settings SD TS Bitrate Mbps HD T5 Bitrate Mbps Stuffing Output IP Settings Destination IP 239 0 0 1 1234 IP Stream TTL Destination Port 937 746 4556 www rldrake com Matie Res SD Firmware Update COMPOSITIHG ADVANCED Global Settings SD Only Stream Settings video Settings Video Resolution Video Encoder Format MPEG wv SD Video Bitrate Mbps Field Matian Aspect Ratio 16 9 wv Video Mode Flags Audio Settings Audio Encoder Format Audio DialNorm 27 dB Audio Bitrate 128 kbps Transport Stream Settings SD T5 Bitrate Mbps 3750 Stuffing Output iP Settings Destination IP 42738 00 2 Destination Port SAFE IP Stream TTL 128 Apply Encoder Tab Allows the user to set Global Primary Steam SD only Stream Settings for their PEG encoder Global Settings Sets global settings that apply to both streams and the possible outputs Video Source Displays only on PEG NE24 IP C model Video input selection of SDI or Composite PEG NE24 IP is SDI input only Audio Source Displays only PEG NE24 IP C model Audio input selection of SDI or Analog L R PEG NE24 IP is SDI input only Audio Synchronization A V lip sync
5. Horizontai Orsat px Vertical oset o Overlay for 480i Select File PNG only Choose File No chosen No Image P a 16 937 746 4556 www rldrake com Compositing Screen 1 Compositing allows rendering static images over video frames before compression It supports PNG images including alpha channel transparency 2 Displays only when an image file has been uploaded PLEASE NOTE 1 It takes some time for the image to be uploaded via the web form pre processed making the thumbnail padding if necessary and then loaded by the encoder It takes about 8 10 seconds for a 720x480 image via gigabit LAN 2 In addition to uploading the image Enable Overlay under Overlay Placement on the right must be set to Enabled Overlay for No Input 480i the image resolution must be no larger than 720x480 Overlay for 720p image resolution must be no larger than 1280x720 and Overlay for 1080i image resolution must be no larger than 1920x1080 937 746 4556 www rldrake com 17 Advanced Settings Screen Status Encoder System Log Firmware Update BASIC COMPOSTING ADVANCED Encoder Configuration Advanced Settings Native Resolution Stream Advanced Settings l SD Only Stream Advanced Settings Transport Stream Settings Transport Stream Settings Transport Stream ID 1 0x1 Transport Stream ID 1 0x1 MPEG Program
6. Unicast or Multicast is defined by the IP address Provides Null Packet stuffing up to 25 Mbps Compositing allows rendering static images over video frames Supports PNG images including alpha channel transparency 8 937 746 4556 www rldrake com Front and Rear Panel Operation PEG NE24 IP CONTROL IP RESET POWER INPUT ENCODING OUTPUT 6 000 08 10 100 sp O6 ehwl DE W OO L AUDIO IN VIDEO IN FRONT PANEL 1 Ethernet Control 10 100 Ethernet wired connection for local and remote management 2 IP Reset Button When pressed for lt 2 seconds the IP address of the control port will enable to the default factory IP address 172 16 70 1 Subnet Mask 255 255 255 0 The login credentials will also be enabled to the default username admin and password pass Note The old IP address login and password will still be present in the encoder settings 3 Status LEDs Provides a status of tasks performed by the PEG encoder in real time 1 Power The LED is illuminated when the power is ON 2 Input The LED is illuminated when input video is being received from the HD SD SDI or Composite input 3 Encoding The LED is illuminated when the internal encoder is operational 4 Output The LED is illuminated when the copper or optical SFP is connected to a network REAR PANEL 5 HD SDI IN Digital video HD SD SDI input source 6 SFP Ethernet Output Optical or C
7. adjustment used to adjust your audio to video synchronization For example you may need to delay or lag your audio if your video input is SDI and your audio source is analog Stream Enable Stream combinations available Disable Encoder is not streaming Native Encoder is streaming HD or SD stream depending on the video input HD or SD source SD Only The encoder is streaming a SD stream no matter if the encoder input is HD or SD source Native SD Encoder is streaming a HD and SD stream or a SD stream and SD stream depending on your video input HD or SD source 2 Native Resolution The Primary stream settings sets parameters for streaming HD or SD stream depending on the video input HD or SD source Video Settings Video Encoder Format MPEG 2 or MPEG 4 H 264 SD Video Bitrate Mbps 2 to 8 incremented by 0 1 in MPEG2 and 1 to 4 in H 264 HD Video Bitrate Mbps Primary Stream Settings 8 5 to 19 0 incremented by 0 1 in MPEG2 and 3 5 to 13 0 in H 264 NOTE Once an input is applied only the detected resolution will be displayed Both SD amp HD video bitrates are displayed only when no input is detected Video Mode Flag Field Motion Frame only Field only adjusts video encoder modes for decoder compatibility Field Motion Field encoding mode with algorithm enhancements to improve video quality Use Field Motion encoding mode to improve video quality when video input is interlaced for example 480i or 10801 Some decoders may ha
8. customer s sole and exclusive remedy for breach of this warranty is at Seller s option to receive a suitably modified software or part thereof or b comparable replacement software or part thereof jii Seller retains all right title and interest in and to and ownership of all software including all Core Product Software and Non Core Software including any and all enhancements modifications and updates to the same and iv in some cases the warranty on certain proprietary sub assembly modules manufactured by third party vendors and contained in Seller s products third party software installed in certain of Seller s products and on certain private label products manufactured by third parties for resale by Seller will be of shorter duration or otherwise more limited than the standard Seller limited warranty In such cases Seller s warranty with respect to such third party proprietary sub assembly modules third party software and private label products will be limited to the duration and other terms of such third party vendor s warranty if any In addition certain products that are not manufactured by Seller but are resold by Seller may carry the original OEM warranty for such products if any The limited warranty set forth above does not apply to any product sold by Seller which at the time of sale constituted a Refurbished Closeout Product the limited warranty for which is provided in the following paragraph Seller will at its sole o
9. if Field Motion or Field Only modes are selected in the menu Aspect Ratio When native resolution is 720p or 1080i the SD only output can be set as the following 16 9 4 3 Squeeze 640 x 480 43 43 Letterbox 640x480 4 3 Letterbox 720 x 480 4 3 Center 640 x 480 14 937 746 4556 www rldrake com Encoder Tab Audio Settings Audio Encoder Format Select MP2 for MPEG 1 Audio Layer 2 AC 3 for Dolby Digital AC 3 AAC Advanced Audio Coding Audio DialNorm Adjustable from 1 to 31 dB Provides meta data for audio playback gain for Dolby AC 3 compression Audio Bitrate 128 192 320 or 384 Kbps NOTE 320kbps is an option for audio bitrate in MP2 and AAC only Transport Stream Settings SD TS Bitrate Mbps 2 to 25 incremented by 125 Stuffing Output Enable or Disable Enable will include transport stream null packet stuffing to produce a fixed bitrate TS IP Settings Destination IP Destination Port User defined unicast or muliticast address and port number determined by downstream network connectivity device IP Stream TTL 1 to 255 determined by application 937 746 4556 www rldrake com 15 Compositing Screen Status Encoder System Log Firmware Update BASIC COMPOSITING ADVANCED Encoder Configuration Compositing 1 Overlay for No Input 4801 Select File PNG only Overlay Placement Choose File No file chosen Upload _ Uplad _ pem _ Alignment Mode
10. plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Alternate Warnings If this product is equipped with a three wire grounding type plug a plug having a third grounding pin the plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug 937 746 4556 www rldrake com 13 14 15 16 17 18 19 20 21 22 23 Safety Instructions continued Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Power Cord Protection Power supply cords should be rou
11. the encoder s mib file 2 Max Lines to Display Sets the maximum number of lines to display starting at the most recent 22 937 746 4556 www rldrake com Admin Screen To change modify the IP network parameters as well as the Username and Password values for the unit you must be logged in to the unit as Admin to access a hidden screen shown in image below At the top right of the screen select Logged in as admin Status Encoder System Log Firmware Update User Settings Admin User Credentials Admin Username admin ak Current Password ak New Password Confirm Password Guest User Credentials Guest Username guest Ab Current Password New Password Confirm Password Apply System Controls Apply System Defaults Reboot Ue ELBE EL Reboot Licensed Features Enabled Add On Features None Update Key Update Key Admin Username is the Administrator s login 10 characters maximum This login allows the user to make changes to any area of the unit The factory default Login is admin Login is case sensitive Current Password is the Administrator s Current Password 10 characters maximum The factory default password is pass Password is case sensitive and will not be displayed New Password used only if the user wants to change the current Administrator s password Must enter a new password 10 characters maximum Password is case sensitive and will not be displayed Co
12. upload the file and start the Update firmware update For latest firmware information Contact Drake Technical Assistance at 937 746 6990 or by Email servicehelp rldrake com 24 937 746 4556 www rldrake com NOTES 937 746 4556 www rldrake com 25 Service A Return Material Authorization RMA Number is required on ALL PRODUCT RETURNS regardless of whether the product is being returned for repair or for credit Product that is received at the factory without an RMA Number will be returned to the sender unopened RMA Numbers must be used when returning product for credit or repair Use of RMA Numbers will ensure efficient processing When needing to return your product to R L Drake Holdings LLC please follow these simple steps listed below in the order that they appear SERVICE REPAIRS ONLY Contact R L Drake Holdings LLC s Service Department in one of three ways Phone 732 313 4256 Email drakerepair rldrake com Fax 732 679 4022 Request from Drake Service a copy of the Product Return Authorization Form Complete the Product Return Authorization Form fully Return the completed Product Return Authorization Form to the Drake Service Department using one of the contact methods listed in Step 1 After completing Steps 1 through 4 an RMA Number will be assigned to you Securely pack the product and mark the box with your RMA Number If shipping multiple boxes all boxes must be m
13. 3 1 0x1 MPEG Program 1 1 Number NN Number aum PMT PID 450 1 1 eU PMT PID 450 1 1 et s Wideo PID 481 Dx1 e1 Video PID 481 k Audio PID 482 0 1 2 Audio PID 482 0 1 2 Audio Language eng Audio Lanquage eng Descriptor Descriptor video GOP Settings GOP Settings N P Frames per GOP P Frames per GOP B Frames between B Frames between I P DWB Siy ATSC Pole Settings OVE SL Settings Service Info Type Disabled wv Service Info Type Disabled wv video Stream Qos Settings video Stream Qos Settings Diffserv DSCP Default Best Effort 0 gt Diffserv DSCP Default Best Effort 0 gt VLAN PCP QoS Default Best Effort 0 VLAN PCP 005 Default Best Effort 0 Apply 18 937 746 4556 www rldrake com Advanced Settings Screen User may configure the following previously fixed value parameters 1 Transport Stream ID Configures the transport stream ID number used Program Specific Information PSI tables in the stream 2 MPEG Program Number Configures the MPEG Program used in all PSI tables for this stream 3 PMT Video and Audio PIDs Configures the Packet Identifier PID used to transmit all Program Map Tables in the stream Configures the PID used to transmit Video and associated data Configures the PID used to transmit audio and associated data All PIDs are displayed in Hex format If you type a decimal format into the field the GUI will aut
14. CING TO QUALIFIED PERSONNEL ONLY CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE ATTENTION POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT Important Safety Instructions Read Instructions All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleansers Use a damp cloth for cleaning Attachments Do not use attachments that are not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this product near water for example near a bathtub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious inj
15. IES OR REPRESENTATIONS MADE OR IMPLIED BY SELLER OR BY ANY OF SELLER S EMPLOYEES OR REPRESENTATIVES OR IN ANY OF SELLER S BROCHURES MANUALS CATALOGS LITERATURE OR OTHER MATERIALS IN ALL CASES BUYER S SOLE AND EXCLUSIVE REMEDY AND SELLER S SOLE OBLIGATION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT F O B SHIPPING POINT AS SELLER IN ITS SOLE DISCRETION SHALL DETERMINE SELLER SHALL IN NO EVENT AND UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL INDIRECT INCIDENTAL PUNITIVE DIRECT OR SPECIAL DAMAGES BASED UPON BREACH OF WARRANTY BREACH OF CONTRACT NEGLIGENCE STRICT TORT LIABILITY OR OTHERWISE OR ANY OTHER LEGAL THEORY ARISING DIRECTLY OR INDIRECTLY FROM THE SALE USE INSTALLATION OR FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM SELLER claims for shortages defects and non conforming goods must be made by the customer in writing within five 5 days of receipt of merchandise which writing shall state with particularity all material facts concerning the claim then known to the customer Upon any such claim the customer shall hold the goods complained of intact and duly protected for a period of up to sixty 60 days Upon the request of Seller the customer shall ship such allegedly non conforming or defective 0005 freight prepaid to Seller for examination by Seller s inspection department and verification of the defect Seller at its option w
16. arked with the RMA Number Place the RMA Number near the return address in large bold print approx 2 in height CREDIT RETURNS ONLY Contact R L Drake Holdings LLC s Service Department in one of three ways Phone 937 746 6990 Email servicehelp rldrake com Fax 937 806 1510 Request from Drake Service a copy of the Product Return Authorization Form Complete the Product Return Authorization Form fully Return the completed Product Return Authorization Form to the Drake Service Department using one of the contact methods listed in Step 1 After completing Steps 1 through 4 an RMA Number will be assigned to you Securely pack the product in its original undamaged box returning the product without its original packaging in good new condition may cause the incursion of additional fees Pack this box within another shipping container or box Mark the shipping box or container with your RMA Number Place the RMA Number near the return address in large bold print approx 2 in height Ship your SERVICE REPAIR ONLY return to Ship your CREDIT RETURNS ONLY return to R L Drake Holdings LLC R L Drake Holdings LLC Attn Product Credit Returns One Jake Brown Road Old Bridge NJ 08857 Attn Product Service Returns One Jake Brown Road Old Bridge NJ 08857 NOTE All Credit Returns are subject to a 15 Restock Fee NOTE shipments are to be PRE PAID by the sender NO COD s will be accepte
17. ble will include transport stream null packet stuffing to produce a fixed bitrate TS IP Settings Destination IP Destination Port User defined unicast or muliticast IP address and port number determined by downstream network connectivity device IP Stream TTL 1 to 255 determined by application 3 SD only Stream Settings Provides a SD stream of the video input source Video Settings Video Encoder Format MPEG 2 or MPEG 4 H 264 SD Video Bitrate Mbps 2 to 8 incremented by 0 1 in MPEG 2 and 1 to 4 in H 264 Video Mode Flag Field Motion Frame only Field only adjusts video encoder modes for decoder compatibility Field Motion Field encoding mode with algorithm enhancements to improve video quality Use Field Motion encoding mode to improve video quality when video input is interlaced for example 480i or 10801 Some decoders may have compatibility issues when decoding field encoding Video quality test equipment readings may be inaccurate when using this mode Frame Only Frame encoding mode Use Frame Only mode when video input is progressive for example 720P Frame Only mode can be used to encode interlaced video for example 480i or 10801 Field Only Field encoding mode Use Field Only mode when video input is interlaced for example 480i or 1080i Some decoders may have compatibility issues when decoding field encoding NOTE If the video input is 720P the encoding mode will automatically default to Frame only mode even
18. d IF YOU NEED TECHNICAL HELP Call our Customer Service Technical Support line at 1 937 746 6990 weekdays between 8 00 A M and 4 00 Eastern Standard Time Please have the unit s serial number available We will also need to know the specifics of any other equipment connected to the unit When calling please have the unit up and running near the phone if possible Our technician s will likely ask certain questions tc aid in diagnosis of the problem Also have a voltmeter handy if at all possible DRAKE also provides technical assistance by Email servicehelp rldrake com Fax 937 806 1510 Many of the products that are sent to us for repair are in perfect working order when we receive them For these units there is a standard checkout fee that will be charged Please perform whatever steps are applicable from the product s Instruction Manual before calling or writing as this could save unnecessary phone charges Please do not return the product without calling Drake Service and following the steps above first it is preferred to help troubleshoot the problem over the phone or by Email first saving you both time and monev 26 937 746 4556 www rldrake com Limited Warranty Seller will at its sole option either repair or replace with a new or factory reconditioned product as Seller may determine any product manufactured or sold or in the case of software licensed by Seller which is defective in materials or workmanship
19. e warranty period for computer programs in machine readable form included in a hardware product which are essential for the functionality thereof as specifically stated in the published product specifications Core Product Software will be coincident with the warranty period of the applicable hardware product within which such Core Product Software is installed Software patches bug fixes updates or workarounds do not extend the original warranty period of any Core Product Software or Non Core Software Notwithstanding anything herein to the contrary 1 Seller s sole obligation for software that when properly installed and used does not substantially conform to the published specifications in effect when the software is first shipped by Seller is to use commercially reasonable efforts to correct any reproducible material non conformity as determined by Seller in its sole discretion by providing the customer with a telephone or e mail access to report non conformance so that Seller can verify reproducibility b a software patch or oug fix if available or a workaround to bypass the issue if available and c where applicable replacement or damaged or defective external media such as CD ROM disk on which the software was originally delivered di Seller does not warrant that the use of any software will be uninterrupted error free free of security vulnerabilities or that the software will meet the customer s particular requirements and the
20. g Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product C If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutes may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer ANTENNA LEAL 1 WIRE NOTE TO CABLE INSTALLER THIS REMINDER 1S PROVIDED
21. ill either repair replace or issue 3 credit for products determined to be defective Seller s liability and responsibility for defective products is specifically limited to the defective item or to credit towards the original billing All such replacements by Seller shall be made free of charge f o b the delivery point called for in the original order Products for which replacement has been made under the provisions of this clause shall become the property of Seller Under no circumstances are products to be returned to Seller without Seller s prior written authorization Seller reserves the right to scrap any unauthorized returns on a no credit basis Any actions for breach of a contract of sale between Seller and a customer must be commenced by the customer within thirteen 13 months after the cause of action has accrued A copy of Seller s standard terms and conditions of sale including the limited warranty is available from Seller upon request Copies of the limited warranties covering third party proprietary sub assembly modules and private label products manufactured by third parties may also be available from Seller on request Rev 0713 937 746 4556 www rldrake com 27 R L DRAKE HOLDINGS LLC Sales 937 746 4556 Support 937 746 6990 Fax 937 806 1510 www rldrake com
22. imately 7 5 DX 1 15 H X 3 5 W WEIGHT 1 15 Ibs POWER REQUIREMENTS 100 120 VAC 60 Hz for supplied AC adapter DESCRIPTION 10 100 1000BASE T SFP RJ 45 100M COPPER SFP MM 850 550M SFP SMF 1310 10KM 1002621 1002622 1000BASE SX SFP 850NM 550M MMF DDM 1000BASE LX SFP 1310NM 10KM SMF DDM 1002623 SFP SMF 1550 80KM 1000BASE ZX SFP 1550NM 80KM SMF DDM 1002624 SFP SMF CWDM 1470NM 80KM 1 25GBASE CWDM SFP 1470NM 80KM SMF DDM 1002625 SFP SMF CWDM 1490NM 80KM 1 25GBASE CWDM SFP 1490NM 80KM SMF 1002626 SFP SMF CWDM 1510NM 80KM 1 25GBASE CWDM SFP 1510NM 80KM SMF DDM 1002627 SFP SMF CWDM 1530NM 80KM 1 25GBASE CWDM SFP 1530NM 80KM SMF DDM 1002628 SFP SMF CWDM 1550NM 80KM 1 25GBASE CWDM SFP 1550NM 80KM SMF 1002629 SFP SMF CWDM 1570NM 80KM 1 25GBASE CWDM SFP 1570NM 80KM SMF DDM 1002630 SFP SMF CWDM 1590NM 80KM 1 25GBASE CWDM SFP 1590NM 80KM SMF DDM 1002631 SFP SMF CWDM 1610NM 80KM 1 25GBASE CWDM SFP 1610NM 80KM SMF DDM 1002632 XX SFP SMF DWDM CHXX 40KM 1 25GBASE DWDM SFP CH 20 59 40KM SMF 1002633 XX SFP SMF DWDM CHXX 80KM 1 25GBASE DWDM SFP CH 20 59 80KM SMF DDM Last 2 numbers indicate channel number 20 59 6 937 746 4556 www rldrake com Specifications price and availability are subject to change without notice or obligation Installation amp Power Up Un
23. le is required PACKET FORMAT UDP SPTS 1xHD 1xSD PHYSICAL SPECIFICATIONS TEMPERATURE RATING 0 50 C Ambient FORM FACTOR Desktop Modulator DIMENSIONS Approximately 7 5 D X 1 15 HX 3 5 W WEIGHT 1 15 Ibs POWER REQUIREMENTS 100 120 VAC 60 Hz for supplied AC adapter Optional SFP Plug ins 1000 BT copper MODEL SFP C 10 100 1000 TRANSCEIVER STOCK 1002620 PEG NE24 IP C Item 1002613 HD PEG Encoder with HD SDI or Composite Video with L R Audio Input and IP Output INTERFACE VIDEO INPUTS SD HD SDI BNC Type Input Connection Composite Video RCA Input Connector Closed Caption Support AUDIO INPUTS SD HD SDI with PCM Embedded Audio Analog Audio L 2xRCA Input Connectors VIDEO OPTIONS INPUT VIDEO MODES 480i 640x480 720x480 30FPS 720p 1280x720 60FPS 1080i 1920x1080 30FPS AUTO SCAN for Input Resolution MPEG 2 OR H 264 Brightness Contrast Hue Saturation Baseline Main High VIDEO FORMAT VIDEO ADJUSTMENTS H 264 PROFILE SUPPORT AUDIO OPTIONS ENCODER FORMAT Dolby Digital or MPEG1 Layer 2 OUTPUT BITRATE 128 192 320 or 384 Kbps NOTE 320kbps is an option for audio bitrate in MP2 and AAC only Manufactured under license from Dolby Laboratories OUTPUT VIDEO OUTPUT SFP Port IP SPTS SFP module is required PACKET FORMAT UDP SPTS 1xHD 1xSD PHYSICAL SPECIFICATIONS TEMPERATURE RATING 0 50 C Ambient FORM FACTOR Desktop Modulator DIMENSIONS Approx
24. level Priority Code Point in the IEEE802 1q VLAN tag as specified by IEEE 802 1p This setting only applies when the SFP video network has VLAN tagging enabled These values should be left at their default values unless the user has a specific reason to change them 937 746 4556 www rldrake com 19 20 System Configuration Tab Logged in as admin Release Status Encoder System Log Firmware Update System Configuration Network Configuration Mode Advanced Y Advanced mode enables the SFP output port and associated settings Simple mode allows steaming out the front panel control port and disables the SFP port SFP Video Network Settings MAC Address FO 3F F6 00 07 C3 IP Address 12 1 Default Gateway 0 0 0 0 HTTP Server Enable Disable Link Speed copper only Auto VLAN Disable v SFP Control Only VLAN Settings Enable Disable v Control Port Ethernet Settings Control Port MAC Address FU 3F F8 00 07 C4 IP Address 172 16 70 1 Subnet Mask Default Gateway 172 16 70 254 Unit Description SNMP Settings Trap Target IP 12 2 Trap Target Port M62 System Contact Web Settings User Timeout 30 Minutes 937 746 4556 www rldrake com System Configuration Tab The system configuration tab allows the user to set Ethernet and SNMP settings 1 SFP Video Network Settings Mac Address IP address Subnet Mask Defaul
25. lt Gateway Click OK to close the dialog box Now your computer is ready to communicate with the unit 2 The following steps explain how to do this for a computer with Windows 7 operating software a On your computer open the Control Panel b Click on Network and Internet c Click on the View network status and tasks d Click on Change Adapter Settings on left hand side of the window e Right click on the Local Area Connection and then click on the Properties f A dialog box entitled Local Area Connection Properties will appear In this box double click on the Internet Protocol Version 4 TCP IPv4 g Adialog box entitled Internet Protocol Version 4 TCP IPv4 Properties will appear Select the Use the following IP address option and enter the following addresses IP address 172 16 70 2 Subnet mask 255 255 255 0 No need to enter a value for the Default Gateway Click OK Open a web browser on your computer and enter the following URL address http 172 16 70 1 Once the PEG web server has been loaded from your browser you should see the login dialog Enter the username and password and click LOG IN The default username is admin in lower case letters and the default password is pass in lower case letters System Login Username Poo Password 10 937 746 4556 www rldrake com Status Tab The status tab provides the following information View only Stat
26. nfirm Password must enter the same password as entered in 3 above If password doesn t match an error will be displayed Guest Username is the Guest login 10 characters maximum This login allows the user to view the unit settings but does not allow any changes The factory default Guest Login is guest Login is case sensitive 6 Current Password is the Current Guest Password 10 characters maximum The factory default Guest password is pass Password is case sensitive and will not be displayed New Password used only if the user wants to change the current Guest password Must enter a new password 10 characters maximum Password is case sensitive and will not be displayed Confirm Password must enter the same password as entered in 7 above If password doesn t match an error will be displayed Licensed Features To enable optionally purchased add on features type in the License Key number provided by Drake and then click on the Update Key 937 746 4556 www rldrake com 23 Firmware Update Tab This tab uploads the newest available firmware for the PEG NE24 and deploys firmware to the unit While the firmware update tab is actively updating the logging information and instructions are provided When the update is completed the unit will automatically reboot Status Encoder System Log Firmware Update Firmware Update Upload Select firmware update file Choose File No file chosen Click Update to
27. omatically convert your decimal format to a Hex value PIDs are expressed in both decimal amp hex formats to the right of the entry field 4 Audio Language Descriptor Configures the ISO 639 audio language Use 3 character Alpha 3 code for this setting 5 P Frames per GOP Specifies total number of P frames in a Group of Pictures GOP 6 B Frames between Specifies number of B frames between each or P frame in 7 Service Info Type If Service Info Type is set to DVB NIT SDT it also enables the fields DVB Network Name Specifies the Network Name in the DVB NIT table DVB Service Name Specifies the Service Name in the DVB SDT table DVB Provider Name Specifies the Provider Name in the DVB SDT table If Service Info Type is set to ATSC MGT VCT e VCT Short Name 7 letter name for the channel Major Channel Number Minor Channel Number Specifies the two part channel number in the VCT typically displayed in the format major minor for example 2 1 DiffServ DSCP Configures the value of the differentiated services code point DSCP field in the IPv4 header for the video output stream The format of this field is specified by IETF RFC2474 but actual values are specified by several related RFCs The encoder does not support explicit congestion notification ECN which makes use of the lower 2 bits of this header field VLAN QoS Configures the value of the Ethernet frame
28. opper SFP IP video and audio output 7 5VDC Power Port Accepts five volt power to the device NTSC Composite Video Audio In Analog video with Left and Right Audio PEG NE 24 IP C model only 937 746 4556 www rldrake com 9 Login Screen First connect the appropriate input and output video cables and plug in the PEG NE24 power cable ETHERNET ACCESS Local or remote communication with the unit is only possible through a GUI based menu via any standard web browser Chrome or Firefox is recommended for IE use IE8 minimum Before you can communicate with the unit you must configure your computers Local Area Network connection to confirm with the PEG default IP of 172 16 70 1 To do so follow these steps Connect an Ethernet cable from your computer to the Control 10 100 port of the PEG 1 The following steps explain how to do this for a computer with Windows XP operating software a On your computer open the Control Panel b Double click on Network Connections Right click on the Local Area Connection and then click on the properties d A dialog box entitled Local Area Connection Properties will appear In this box double click on the Internet Protocol TCP IP e A dialog box entitled Internet Protocol TCP IP Properties will appear Select the Use the following IP address option and enter the following addresses IP address 172 16 70 2 Subnet mask 255 255 255 0 No need to enter a value for the Defau
29. or fails to meet the applicable specifications that are in effect on the date of shipment or such other specifications as may have been expressly agreed upon in writing i for a period of three 3 years from the date of original purchase for all stock hardware products other than those specifically referenced herein below having a shorter warranty period ii for a period of one 1 year from the date of original purchase with respect to all MegaPort IPTV products test equipment and fiber optics receivers transmitters couplers and integrated receiver distribution amplifiers iii for a period of one 1 year from the date of original purchase or such shorter period of time as may be set forth in the license agreement specific to the particular software being licensed from Seller with respect to all software products licensed from Seller other than Core Product Software that is a developed for a specific function or application b complimentary to and does not function without the Core Product Software and c listed with a specific model number and stock number in Seller s Price List Non Core Software iv for a period of ninety 90 days from the date of original purchase with respect to non serialized products and accessories such as parts sub assemblies splitters and all other products sold by Seller other than Core Product Software and Refurbished Closeout Products not otherwise referred to in clauses i through iii above Th
30. packing You will find the following items in the box PEG Encoder Unit QTY 1 Power Adapter QTY 1 Installation The PEG Encoder is designed to be mounted on a desk top or table top in the close proximity to a 120 VAC 60 HZ power plug For safe and reliable operation do not place objects within 1 inch of the unit that block airflow Power Up Plug the Power Adapter into a power plug 120 VAC 60 HZ Plug the power pin into the back of the PEG unit at the input marked DC Power For safe and reliable operation only use the power adapter supplied with the PEG encoder 937 746 4556 www rldrake com General Description amp Features The PEG NE24 IP PEG NE24 IP C is a High Definition HD Standard Definition SD video encoder with IP output The PEG encoder has two IP output streams available one HD or SD and one SD based on the Composite or HD SD SDI input source resolution For each output stream UDP is encapsulated SPTS single program transport stream The PEG NE24 is controlled through a web page interface The web page provides remote monitoring and updating capabilities and SNMP traps for status updates Encodes a HD amp SD stream of the same content in either MPEG 2 or H 264 formats Optional In band management with VLAN support on SFP output e GUI based menu for local amp remote configuration Password Protected e Configuration and shutdown control via HTTP server Ul and programmable
31. ption either repair or replace with a new or factory reconditioned product as Seller may determine any product sold by Seller which at the time of sale constituted a refurbished or closeout item Refurbished Closeout Product which is defective in materials or workmanship or fails to meet the applicable specifications that are in effect on the date of shipment of that product or fails to meet such other specifications as may have been expressly agreed upon in writing between the parties for a period of ninety 90 days from the date of original purchase Notwithstanding the foregoing in some cases the warranty on certain proprietary sub assembly modules manufactured by third party vendors and contained in Seller products third party software installed in certain of Seller s products and on certain private label products manufactured by third parties for resale by Seller will be of shorter duration or otherwise more limited than Seller limited warranty for Refurbished Closeout Products In such cases Seller s warranty for Refurbished Closeout Products constituting such third party proprietary sub assembly modules third party software and private label products will be limited to the duration and other terms of such third party vendor s warranty if any n addition notwithstanding the foregoing i certain Refurbished Closeout Products that are not manufactured but are resold by Seller may carry the original OEM warranty for such products if an
32. s fixed VLAN tag values now supported from 1 to 4095 upper limit was 255 Version 1 9 1 Added ability to change aspect ratio settings MPEG 2 video streams will now be closed GOP MPEG 4 h 264 streams will contain IDR frames The SNMP mib file can be downloaded from the Log page All PID and program numbers on advanced settings page are displayed in hexadecimal and decimal notation For more information regarding product firmware releases please visit our website at www rldrake com or contact Technical Assistance at 937 746 6990 2 937 746 4556 www rldrake com Table of Contents CAUTION STATEMENT S 4 IMPORTANT SAFETY INSTRUCTIONS ana ania EANAN E NANen 4 ADI GAFN FAE LY 6 INSTALEATION 7 GENERAL DESCRIPTION amp FEATURE S ERU 8 FRONT AND REAR 9 LOGIN SCREEN 10 E stds aman as ete E A A E E A A E T 11 E 12 COMPOSITING SC REEN 16 ADVANCED SETTINGS GAN 18 SYSTEM 20 BG IN EE EEE E E E NEF A E NT FNAN FRYN 22 ADMIN fe
33. t Gateway and HTTP Server Enable SFP Port HTTP Server Enable Enabled This will allow management capability on the same SFP port SFP port IP Address as the streaming video 2 SFP Control Only VLAN Settings Enable Tag IP address Subnet Mask and Default Gateway VLAN Enable Enable This will allow management capability on the same SFP port using VLAN IP address 3 Control Port Ethernet Settings Mac Address IP address Subnet Mask and Default Gateway 4 Unit Description Unit Name and User Location User logged values 5 SNMP Settings Trap IP address Trap Target Port System Contact 6 Web Settings User Timeout 5 minutes to 30 minutes 937 746 4556 www rldrake com 21 Log Screen NL RR You have chosen to open Syst e m Lo g PEG MIB mib which is Text Document from http 172 16 70 1 Download SNMP MIB What should Firefox do with this file Open with Notepad default SFP Module Information Name OEM COMPATIBLE P N SFP GE T OEM S N OEMCGETO000256 by IEEE OUI XEROX CORPORATION 000000 Date Lot Unspecified Identifier 0x3 SFP Transceiver 4 Log Messages Max Lines to Display 400 days 0 03 35 User logged in from 172 16 70 2 days 0 00 18 Video output link down days 0 00 18 Video source SDI unlocked or format unsupported switching to te da U 00 TA Crea I 7 5 M 1 Click on the link to save
34. ted so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines other electric light or power circuits where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requirin
35. ury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or similar surface This product should not be placed in a built in installation such as bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the product s operating instructions Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This
36. us Encoder System Log Firmware Update System Information and Status System Information Serial Number 5 8 Hardware version 1 Version v1 9 1 20150706 Unit Location Uptime 0 days 2 13 27 Encoder Status Video Lock Locked Resolution 1080130 Embedded Audio Yes The serial number indicates serial number of PEG encoder The hardware version indicates the hardware version of the PEG encoder Indicates the software version of the unit Indicates user defined unit constants Name and Location The Uptime of the unit days hours minutes and seconds which can be set on the System tab under Unit Description Primary Channel Status Box Video Lock Indicates if the video is present and locked Resolution Indicates the resolution of the source video The PEG encoder supports resolutions of 4801 640x480 720x480 30FPS 720p 1280x720 60FPS 1080i 1920x1080 30FPS Embedded Audio Indicates if there is embedded audio on the stream 937 746 4556 www rldrake com 11 12 Encoder Tab Status Encoder System Log BASIC Encoder Configuration Video Source v Audio Source oni wv Audio Synchronization Stream Enable Native Resolution Stream Settings Video Settings Video Resolution Unlocked unknown Video Encoder Format MPEG 4 H 2B4 SNNYS y Zwar 2 SD Video Bitrate MI Z Ideo ps 5 Beal 7 2 2 2 2 2 7 Z 2
37. ve compatibility issues when decoding field encoding Video quality test equipment readings may be inaccurate when using this mode Frame Only Frame encoding mode Use Frame Only mode when video input is progressive for example 720P Frame Only mode can be used to encode interlaced video for example 480i or 10801 Field Only Field encoding mode Use Field Only mode when video input is interlaced for example 480i or 1080i Some decoders may have compatibility issues when decoding field encoding NOTE If the video input is 720P the encoding mode will automatically default to Frame only mode even if Field Motion or Field Only modes are selected in the menu Aspect Ratio Affects only SD 480i inputs Video display can be set for 4 3 normal SD or 16 9 widescreen 937 746 4556 www rldrake com 13 Encoder Tab Audio Settings Audio Encoder Format Select MP2 for MPEG 1 Audio Layer 2 AC 3 for Dolby Digital AC 3 AAC Advanced Audio Coding Audio DialNorm Adjustable from 1 to 31 dB Provides meta data for audio playback gain for Dolby AC 3 compression Audio Bitrate 128 192 320 or 384 Kbps NOTE 320kbps is an option for audio bitrate in MP2 and AAC only Transport Stream Settings SD TS Bitrate Mbps 2 to 25 incremented by 125 HD TS Bitrate Mbps Primary Stream Settings 0 415 to 25 incremented by 0 125 TS bitrate must be greater than 0 400 Mbps audio bitrate video bitrate Stuffing Output Enable or Disable Ena
38. y which may be longer or shorter than Seller s limited warranty for Refurbished Closeout Products All sales of Refurbished Closeout Products are final Io obtain service under this warranty the defective product together with a copy of the sales receipt serial number if applicable or other satisfactory proof of purchase and a brief description of the defect must be shipped freight prepaid to Seller at the following address One Jake Brown Road Old Bridge New Jersey 28857 warranty does not cover failure of performance or damage resulting from i use or installation other than in strict accordance with manufacturer s written instructions ii disassembly or repair by someone other than the manufacturer or a manufacturer authorized repair center iii misuse misapplication or abuse iv alteration v exposure to unusual physical or electrical stress abuse or accident or forces or exposure beyond normal use within specified operational or environmental parameters set forth in applicable product specifications vi lack of reasonable care or vii wind ice snow rain lightning or any other weather conditions or acts of God OTHER THAN THE WARRANTIES SET FORTH ABOVE SELLER MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND EXPRESS OR IMPLIED AS TO THE CONDITION DESCRIPTION FITNESS FOR A PARTICULAR PURPOSE MERCHANTABILITY OR AS TO ANY OTHER MATTER AND SUCH WARRANTIES SET FORTH ABOVE SUPERSEDE ANY ORAL OR WRITTEN WARRANT
Download Pdf Manuals
Related Search