Operation Guide 5174
Contents
1. E 61 a Gq 5 After confirming that the 6 Right Dial Hands are in the correct home position press This will advance to Left Dial Hand home position adjustment e The 4 Left Dial Hand is in the correct home position if it is pointing at 12 o clock If it isn t use and to move it to 12 o clock 6 After confirming that the 4 Left Dial Hand is in the correct home position press This will advance to day home position adjustment e The 7 Day is in the correct home position if it shows 1 If it doesn t use and to change the day to 1 7 Press to return to the Timekeeping Mode e The 7 Day moves to the current day and then the 1 Hour Hand and the 3 Minute Hand move to the current time Wait until everything stops moving E 62 Troubleshooting Hand Movement and Position E lost track of what mode the watch is in Refer to To select a mode page E 32 To return directly to the Timekeeping Mode from any other mode hold down for about two seconds E The 2 Second Hand is moving at two second intervals E All the watch s hands are stopped at 12 o clock and none of the buttons work Power may be low Expose the watch to light until the 2 Second Hand starts moving normally at one second intervals page2. E 49 Operation Guide 5174 To stop the alarm Press any button Note e Pressing any button while the alarm is sounding simply stops the alarm sound It does not stop the elapsed time operation that started when the end of the countdown was reached To stop the elapsed time operation press E 50 Checking the Current Time in a Different Time Zone You can use the World Time Mode to view the current time in one of 29 time zones around the globe The city that is currently selected in the World Time Mode is called the World Time City 7 Hand Functions 2 Second Hand Indicates the currently selected World Time City 4 Left Dial Hand Indicates the current STD standard time or DST daylight saving time setting of the currently selected time zone 6 Right Dial Hands Indicate the current time in the selected World Time City in 24 hour format E 51 To view the time in another time zone 1 Use to move the 4 Left Dial Hand to STD or DST e The 2 Second Hand will move to the city code of the currently selected World Time City 2 Use to move the 2 Second Hand to the city code you want to select as the World Time City e The 6 Right Dial Hands will move to the current time in the time zone of the current city code At this time the 1 Hour Hand and 3 Minute Hand will continue to indicate the current time in the Home City e For full i
3. e The 6 Right Dial Hands will indicate the current time in your new World Time City Note e If your current World Time City supports time calibration signal reception making it your Home City enables calibration signal reception for that city E 56 Using the Alarm When the alarm is turned on an alarm will sound for about 10 seconds each day when the time in the Timekeeping Mode reaches the preset alarm time This is true even if the watch is not in the Timekeeping Mode A Hand Functions 2 Second Hand Indicates the current alarm ON OFF setting Left Dial Hand Points to AL Right Dial Hands Indicate the current alarm time setting in 24 hour format E E 57 To change the alarm time setting 1 Use to move the 4 Left Dial Hand to AL 2 Use and to change the alarm time setting e Each press of either button will move the 6 Right Dial Hands one minute e Holding down or will start high speed hand movement in the applicable direction To stop high speed hand movement press any button e The alarm always works based on the time kept in the Timekeeping Mode e The watch will return to the Timekeeping Mode automatically if you do not perform any operation in the Alarm Mode for about two or three minutes To turn the alarm on or off In the Alarm Mode press to toggle the alarm on and off The 2
4. The hand points to AL E 32 Timekeeping Use the Timekeeping Mode to view the current time and date To enter the Timekeeping Mode from any other mode hold down for about two seconds Hand Functions Hour Hand Second Hand Minute Hand Left Dial Hand Indicates the day of the week Lower Dial Hand Indicates the current hour in the Home City time in 24 hour format Right Dial Hands Indicate the current time in the World Time City page E 51 in 24 hour format 7 Day 3 fe gt 2 N o gt E 33 Configuring Home City Settings There are two Home City settings actually selecting the Home City and selecting either standard time or daylight saving time DST To configure Home City settings Note e This watch does not have a city code that corresponds to Newfoundland 1 In the Timekeeping Mode keep depressed for about five seconds as the 2 Second Hand goes through the following sequence e Moves to YES or Y for some models or NO N to indicate the last signal reception result then to READY R and then to the city code of the currently selected Home City e This indicates the city code setting mode E 34 e The watch will exit the setting mode automatically if you do not perform any operation for about two or three minutes e For details
5. Second Hand will indicate the current ON OFF setting To stop the alarm Press any button E 58 Adjusting Home Positions Manually Strong magnetism or impact can cause the hands and or date of the watch to be off even if the watch is able to perform the signal receive operation If this happens perform the applicable home position adjustment procedures in this section e Hand home position adjustment is not required if the time and day settings are correct Note Any time after you enter the home position adjustment mode in step 1 of the following procedure you can return to the Timekeeping Mode by pressing 4 The watch also will return to the Timekeeping Mode automatically if you do not perform any operation for about two or three minutes in home position adjustment mode In either case any adjustments you made before the watch returned to the Timekeeping Mode will be applied To adjust the home positions manually 1 Hold down for about two seconds until the watch beeps twice and enters the Timekeeping Mode E 59 CASIO Operation Guide 5174 2 Hold down for about three seconds until the watch beeps e The watch is now in the home position adjustment mode e The watch will exit the adjustment mode automatically if you do not perform any operation for about two or three minutes e First is 2 Second Hand home position adjustment e If the 2 Second Hand moves to 12 o clock it i
6. 9 5 LON London SYD Sydney 10 PAR Paris 1 NOU Noumea 11 ATH Athens 2 WLG Wellington 12 L 2 L 3
7. about city codes see the City Code able at the back of this manual 2 To change the Home City setting press to move the 2 Second Hand clockwise e Keep pressing until the Z Second Hand is pointing at the city code you want to select as your Home City e Each time you select a city code the 1 Hour Hand Minute Hand 5 Lower Dial Hand and 7 Day move to the current time and date for that city code Do not perform the next operation until these hands stop moving es 3 Press 8 to toggle the time for the currently selected city code between STD standard time DST daylight saving time E 35 e In the city code setting mode the 4 Left Dial Hand indicates the current daylight saving time setting as STD standard time or DST daylight saving time e Note that you cannot switch between STD standard time DST daylight saving time while UTC is selected as your Home City 4 After all the settings are the way you want press to return to the Timekeeping Mode To toggle the Home City time between standard time and daylight saving time 1 Perform the step 1 under To configure Home City settings on page E 34 e Each time you select a city code the 1 Hour Hand 3 Minute Hand and 5 Lower Dial Hand move to the current time for that city code Do not perform the n
8. at two second intervals power is at Level 2 which is quite low Expose the watch to light as soon as possible so it can charge Moves at two second Level Hand Movement Function Status 1 Normal All functions enabled 2 Second Hand moving at two second 2 intervals 7 Day changes to 1 home position 2 Second Hand stopped Hour Hand and 3 Minute Hand stopped All functions disabled at 12 o clock Beeper time calibration signal reception and countdown timer operation disabled w e When power drops to Level 3 all functions will be disabled but the watch will continue to keep time internally for about one week If you recharge the battery sufficiently during this period the analog hands will move automatically to the correct setting and regular timekeeping will resume After one week all settings including timekeeping will be cleared Recharging the battery will reset all settings intervals to their initial factory defaults E 12 E 13 Power Recovery Mode Charging Times The watch is designed to go into a power recovery mode that stops hand operation Level Chanae 2 temporarily whenever power suddenly drops below a certain level due to overuse i Daily g of the alarm tone over a short period Note that all operations are disabled while the Exposure Level Brightness O
9. daylight saving time setting manually Use the procedure under To toggle the Home City time between standard time and daylight saving time page E 36 to change the STD DST setting E The hands and or day indications are off This could indicate that the watch has been exposed to magnetism or strong impact which has caused problems with proper hand and day alignment Adjust the watch s hand and day home position alignment page E 59 E 65 World Time Mode E The World Time indicated by the 6 Right Dial Hands in the World Time Mode is one hour off from the actual time in the selected time zone The STD standard time DST daylight saving time setting of the selected World Time City may be wrong Select the correct STD standard time DST daylight saving time setting page E 53 E The World Time indicated by the 6 Right Dial Hands in the World Time Mode is off Your Home City setting may be wrong Check your Home City setting and correct it if necessary page E 34 Charging E The watch does not resume operation after expose it to light This can happen after the power level drops to Level 3 page E 12 Continue exposing the watch to light until the 2 Second Hand starts moving normally at one second intervals E 66 E The 2 Second Hand starts to move at one second intervals but then suddenly returns to moving at two second intervals The watch probably is not s
10. 18 Radio Controlled Atomic Timekeeping E 38 To change the current time setting manually E 23 To get ready for a receive operation E 41 To change the current date setting manually E 26 To perform manual receive E 44 Using the Stopwatch E 28 To check the result of the latest receive operation E 45 To perform elapsed time measurement E 30 Mode Reference Guide E 45 To perform an elapsed time operation E 31 To determine the watch s current mode E 45 To pause at a split time E 31 To return to the Timekeeping Mode from any other mode E 32 To select a mode E 6 E 7 E 47 Using the Countdown Timer E 63 Troubleshooting E 48 To specify the countdown start time E 72 E 49 To perform a countdown timer operation E 50 To stop the alarm E 51 Checking the Current Time in a Different Time Zone E 52 To view the time in another time zone E 53 To specify standard time or daylight saving time DST for a city E 55 To swap your Home City and World Time City E 57 Using the Alarm E 58 To change the alarm time setting E 58 To turn the alarm on or off E 58 To stop the alarm Specifications E 59 Adjusting Home Positions Manually E 59 To adjust the home positions manually Operation Guide 5174 HE Charging the Watch The face of the watch is a solar cell that generates power from light The generated power charges a built in rechargeable battery which powers watch operations The watch charges whenever it is exposed to light Charging Guide Whenever you ar
11. E 12 E 63 E The hands of the watch suddenly start moving at high speed even when do not perform any operation This could be due to any one of the following causes In all cases the hand movement does not indicate malfunction and should stop shortly e The watch is recovering from a sleep state page E 16 e The time setting is being adjusted following a successful auto time calibration signal receive operation page E 18 e The watch is returning to the Timekeeping Mode automatically from the Alarm Mode page E 58 E Hands suddenly stop moving Button operation also is disabled The watch may be in the power recovery mode page E 14 Do not perform any operation until the hands return to their normal positions in about 15 minutes The hands should return to their correct positions when normal operation returns To help power recover leave the watch in a location where it is exposed to light E 64 E The current time setting is off by hours Your Home City setting may be wrong Check your Home City setting and correct it if necessary page E 34 E The current time setting is off by one hour If you are using the watch in an area where time calibration signal reception is possible see To configure Home City settings page E 34 If you are using in the watch in an area where time calibration signal reception is not possible you may need to change your Home City s STD standard time DST
12. MA1012 EA Operation Guide 5174 CASIO ENGLISH Congratulations upon your selection of this CASIO watch This watch does not have a city code that corresponds to the UTC offset of 3 5 hours Because of this the radio controlled atomic timekeeping function will not display the correct time for Newfoundland Canada Note that CASIO COMPUTER CO LTD assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction E 1 B About This Manual Things to check before using the watch OO 7 2 Button operations are indicated using the letters through shown in the illustration Hand Functions 1 Hold down for about two seconds to enter the Timekeeping Mode and then observe the movement of the 2 Second Hand 1 Hour Hand m gt Is the 2 Second Hand moving smoothly in one second intervals 2 Second Hand 3 Minute Hand NO YES 4 Left Dial Hand Indicates the current mode Is the 2 Second Hand moving at The watch is charged sufficiently 5 Lower Dial Hand two second intervals or is it stopped For details about charging see 6 Right Dial Hands Indicate a time in 24 hour format completely Charging the Watch page E 10 depending on the current mode VYES WNE
13. XT 7 Day Power is low Charge the watch by placing Go to step 2 This User s Guide uses numbers shown above to identify watch hands and indicators it in a location where it is exposed to light For details see Charging the Watch page E 10 E 2 E 3 2 Check the Home City and the daylight saving time DST setting The watch is now ready for use e For details about the watch s radio controlled timekeeping feature see Radio Use the procedure under To configure Home City settings page E 34 to configure Controlled Atomic Timekeeping page E 18 your Home City and daylight saving time settings Important Proper time calibration signal reception and World Time settings depend on correct Home City time and date settings in the Timekeeping Mode Make sure you configure these settings correctly 3 Set the current time To set the time using a time calibration signal See To get ready for a receive operation page E 23 e To set the time manually See Configuring Current Time and Date Settings Manually page E 38 E 4 E 5 HE Contents E 33 Timekeeping E 34 Configuring Home City Settings E 2 About This Manual E 34 To configure Home City settings E 3 Things to check before using the watch E 36 To toggle the Home City time between standard time and daylight E 10 Charging the Watch saving time E 17 To recover from the sleep state E 38 Configuring Current Time and Date Settings Manually E
14. ant to change the time setting at this time press and then perform the procedure starting from step 3 under To change the current time setting manually page E 38 4 After the year setting is the way you want press e The watch will beep and change to the month setting mode 8 8 After the settings are the way you want press to Setting the year ones digit return to the Timekeeping Mode e This will cause the 2 Second Hand to move Ni Dee automatically to 12 o clock and resume movement Oct aA Bee Feb 5 Use to move the 2 Second Hand to the month from there aa Cyl N setting you want e The day of the week indicated by the 4 Left Dial M PORE Hand changes automatically in accordance with the Sep i iz Mar 6 After the month setting is the way you want press date year month and day c Mo e The watch will beep and change to the day setting Note Aug HN SA A mode n3 x E JU 2 May id e The watch s built in full automatic calendar makes allowances for different month Jun lengths and leap years Once you set the date there should be no reason to Setting the month change it except after you have the watch s rechargeable battery replaced or after power drops to Level 3 E 42 E 43 To perform elapsed time measurement 1 Use to move the 4 Left Dial Hand to 0 2 Now you can perform eit
15. between two locations in different time zones The following example shows what happens when the Home City and World Time City are swapped while the Home City originally is TYO Tokyo and the World Time City is NYC New York Home City World Time City Tokyo TYO New York NYC petore i 10 08 p m 9 08 a m pping Standard time Daylight saving time After New York NYC Tokyo TYO swop 9 08 a m 10 08 p m pping Daylight saving time Standard time E 54 To swap your Home City and World Time City 1 In the World Time Mode use O to select the World Time City you want e In this example you would move the 2 Second Hand to NYC in order to select New York as the World Time City e Wait until the 6 Right Dial Hands complete their move to the time in the currently selected World Time City You will not be able to perform step 2 of this procedure until the hands stop moving 2 Hold down for about three seconds until the watch beeps e This will make the World Time City NYC in this example your new Home City At the same time it will change the Home City you had selected prior to step 2 TYO in this example to your World Time City e After swapping the Home City and World Time City the watch will stay in the World Time Mode The 2 Second Hand will point to your new World Time City TYO in this example E 55
16. ccessful Manual receive City swapping Receivable Time Calibration Signals Mainflingen Germany Call Sign DCF77 Frequency 77 5 kHz Alarm Daily alarm Anthorn England Call Sign MSF Frequency 60 0 kHz Fukushima Other Power Saving Japan Call Sign JJY Frequency 40 0 kHz Fukuoka Saga Japan Power Supply Solar cell and one rechargeable battery Call Sign JJY Frequency 60 0 kHz Fort Collins Colorado the Approximate battery operating time 5 months no exposure to light after a full United States Call Sign WWVB Frequency 60 0 kHz Shangqiu City charge 10 seconds alarm beeper operation 6 hours of stopped second hand and Henan Province China Call Sign BPC Frequency 68 5 kHz one signal reception of approximately 4 minutes per day E 72 E 73 City Code Table L 1 City Code Table Based on data as of July 2010 z e The rules governing global times UTC offset and GMT differential and summer ey City Gun Gia A City Gae pisal i time are determined by each individual country PPG Pago Pago a JED Jeddah 3 HNL Honolulu 10 THR Tehran 3 5 ANC Anchorage 9 DXB Dubai 4 LAX Los Angeles 8 KBL Kabul 4 5 DEN Denver KHI Karachi 5 CHI Chicago DEL Delhi 5 5 NYC New York 5 DAC Dhaka 6 SCL Santiago 4 RGN Yangon 6 5 RIO Rio De Janeiro 3 BKK Bangkok 7 FEN _ Fernando de Noronha gt a HKG Hong Kong 8 RAI Praia 1 TYO Tokyo 9 UTC 0 ADL Adelaide
17. cessary E 34 Rend and day alignment prop pi Both Auto Receive and Manual Receive y are impossible while a countdown is in 7 countonn timer operation is in progress In the Countdown Timer Mode E 47 progi s stop the timer operation and then return to the Timekeeping Mode There is not enough power for signal P 7 reception Expose the watch to light to charge it E 10 E 70 E 71 Eai Spe ations Stopwatch Measuring capacity 23 59 59 95 EE EE OE E OET OAE EY A ST Measuring unit 1 20 second Accuracy at normal temperature 15 seconds a month with no signal calibration Measuring mode Elapsed time split time Timekeeping Hour minutes hand moves every 10 seconds seconds 24 hour Countdown Timer day day of the week Measuring unit 1 second Calendar system Full Auto calendar pre programmed from the year 2000 to 2099 Input range 1 minute to 24 hours 1 minute increments Other Home City code can be assigned one of 29 city codes and Coordinated Other Auto switching to elapsed time measurement 1 second units when the end Universal Time Daylight Saving Time summer time Standard Time of a countdown timer operation is reached Time Calibration Signal Reception Auto receive up to six times a day 5 times a World Time 29 cities 29 time zones and Coordinated Universal Time day for the Chinese calibration signal Remaining auto receives Other Standard Time Daylight Saving Time summer time Home City World Time cancelled as soon as one is su
18. depends on what you want to do To do this Enter this mode See e View the current time in your Home City and in one of 29 other cities around the globe e View the current date in the Home City e Configure Home City and daylight saving time Timekeeping Mode E 33 DST settings e Perform a time calibration receive operation e Configure time and date settings manually Use the stopwatch to measure elapsed time Stopwatch Mode E 44 Use the countdown timer Countdown Timer Mode E 47 View the current time in one of 29 cities time zones x around the globe World Time Mode E51 Set an alarm time Alarm Mode E 57 E 30 Selecting a Mode With this watch everything starts from the Timekeeping Mode To determine the watch s current mode Check the position of the 4 Left Dial Hand as shown under To select a mode page E 32 To return to the Timekeeping Mode from any other mode Hold down for about two seconds until the watch beeps twice E 31 To select a mode Press to cycle between the modes as shown below The 4 Left Dial Hand indicates the currently selected mode Timekeeping Mode gt Stopwatch Mode The hand points to 0 at The hand indicates 12 o clock the day of the week 1 Countdown Timer Mode SU MO TU WE TH The hand points to TR FR SA World Time Mode The hand points to STD or DST Alarm Mode
19. e not When wearing the watch gt wearing the watch be sure makes sure that its face is to leave it in a location O not blocked from light by the where it is exposed to light sleeve of your clothing e Best charging e The watch may enter a performance is achieved sleep state page E 16 if by exposing the watch to x its face is blocked by your light that is as strong as sleeve even only partially possible E 10 Warning Leaving the watch in bright light for charging can cause it to become quite hot Take care when handling the watch to avoid burn injury The watch can become particularly hot when exposed to the following conditions for long periods e On the dashboard of a car parked in direct sunlight e Too close to an incandescent lamp e Under direct sunlight Important e Keep the watch in an area normally exposed to bright light when storing it for long periods This helps to ensure that power does not run down Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is blocked from exposure to light can cause power to run down Make sure that the watch is exposed to bright light whenever possible Power Levels You can get an idea of the watch s power level by observing the movement of the 2 Second Hand in the Timekeeping Mode e If the 2 Second Hand is moving normally in one second intervals power is at Level 1 e If the 2 Second Hand is moving
20. ext operation until these hands stop moving 2 Press 8 to toggle the time for the city code of the currently selected Home City between STD standard time DST daylight saving time n the city code setting mode the 4 Left Dial Hand indicates the current daylight saving time setting as STD standard time or DST daylight saving time E 36 e Note that you cannot switch between STD standard time DST daylight saving time while UTC is selected as your Home City 3 After the setting is the way you want press to return to the Timekeeping Mode Note After you specify a city code the watch will use UTC offsets in the World Time Mode to calculate the current time for other time zones based on the current time in your Home City e Selecting some city codes makes it possible for the watch to receive the time calibration signal for the corresponding area automatically See page E 18 for details Coordinated Universal Time the world wide scientific standard of timekeeping The reference point for UTC is Greenwich England E 37 Configuring Current Time and Date Settings Manually You can configure current time and date settings manually when the watch is unable to receive a time calibration signal To change the current time setting manually 1 In the Timekeeping Mode keep depressed for about five seconds as the 2 Second Hand goes through the following sequence e Mo
21. gnal transmitters so certain conditions may cause reception problems e When HNL or HKG is selected as the Home City only the time and date are adjusted according to the time calibration signal You need to switch manually between standard time and daylight saving time DST if required See To toggle the Home City time between standard time and daylight saving time page E 36 for information about how to do this E 19 CASIO Operation Guide 5174 Approximate Reception Ranges UK and German Signals North American Signal N ae 2 000 miles 2 Sis A f CYST 8 000 kilometers Anthorn rare X 3 VT ont A 600 miles 500 kilometers Dee A J 1 000 kilometers 1 500 kilometers 5 Ke Fort Collins Mainflingen The Anthorn signal is receivable within this area E 20 Japanese Signals Chinese Signal Fukushima 500 kilometers Changchun ah Beijing C0 Shangqiu rA N shanghai Al Chengdu LYA Hong Kong a 1 500 kilometers 1 000 kilometers E 21 e Even when the watch is within range of a transmitter signal reception may be impossible due to the effects of geographic contours structures weather the time of year the time of day radio interference etc The signal becomes weaker at distances of approximately 500 kilometers which means that the influence of the conditions listed above becomes even greater Signal reception may not be possible at the distances noted below duri
22. her of following stopwatch operations Using the Stopwatch The stopwatch measures elapsed time and split times Hand Functions To perform an elapsed time operation 2 Second Hand Indicates the stopwatch seconds count 4 Left Dial Hand Indicates the stopwatch 1 20 second gt 3S 0 count Start Stop Restart Stop Reset 6 Right Dial Hands Indicate the stopwatch hours and minutes To pause at a split time gt Normal stopwatch hand movement will ea Start Split resume automatically after five seconds Stop Reset E 44 E 45 Note Using the Countdown Timer e The Stopwatch Mode can indicate elapsed time up to 23 hours 59 minutes 59 95 2 F seconds The countdown timer can be configured to start automatically at a preset time and button operation split reset is disabled while hands are moving at high speed sound an alarm when the end of the countdown is reached following a reset operation and when transitioning from a split time back to normal elapsed timekeeping e Once started stopwatch timing continues until you press to stop it even if you Hand Functions 2 Second Hand exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch Moves counter clockwise to countdown the seconds limit defined above e You can press 8 to start an elapsed time operation immediate Sto
23. his time e Signal reception may be difficult or even impossible under the conditions described below Inside or Inside a Near Near a Near Among among vehicle household construction high tension or behind buildings appliances site airport power lines mountains office or other equipment sources of or a mobile electrical phone noise E 24 3 What you should do next depends on whether you are using Auto Receive or Manual Receive e Auto Receive Leave the watch over night in the location you selected in step 2 See Auto Receive on page E 25 for details e Manual Receive Perform the operation under To perform manual receive on page E 26 Auto Receive e With Auto Receive the watch performs the receive operation each day automatically up to six times up to five times for the Chinese calibration signal between the hours of midnight and 5 a m according to the Timekeeping Mode time When any receive operation is successful none of the other receive operations for that day are performed e When a calibration time is reached the watch will perform the receive operation only if it is in the Timekeeping Mode or World Time Mode The receive operation is not performed if a calibration time is reached while you are configuring settings E 25 To perform manual receive 1 In the Timekeeping Mode keep depressed for about two seconds as the 2 Second Hand goes through the following sequence e Moves to YES o
24. n return to the Timekeeping Mode manually by pressing while the 2 Second Hand is pointing to YES Y or NO N Note e The 2 Second Hand will indicate NO N if you have adjusted the time or date setting manually since the latest receive operation E 28 Radio controlled Atomic Timekeeping Precautions Strong electrostatic charge can result in the wrong time setting e Even if a receive operation is successful certain conditions can cause the time setting to be off by up to one second e The watch is designed to update the date and day of the week automatically for the period January 1 2000 to December 31 2099 Updating of the date by signal reception will no longer be performed starting from January 1 2100 e If you are in an area where signal reception is not possible the watch keeps time with the precision noted in Specifications page E 72 The receive operation is disabled under any of the following conditions While power is at Level 2 or lower page E 12 While the watch is in the power recovery mode page E 14 When the watch is in the function sleep state power saving page E 16 While a countdown time operation is in progress page E 47 e A receive operation is cancelled if an alarm sounds while it is being performed E 29 CASIO Operation Guide 5174 HEM Mode Reference Guide Your watch has five modes The mode you should select
25. nformation on city codes see the City Code Table at the back of this manual e If you think that the time indicated for the selected time zone is not correct it probably means that there is something wrong with your Home City settings Use the procedure under To configure Home City settings page E 34 to correct the Home City settings E 52 To specify standard time or daylight saving time DST for a city 1 In the World Time Mode use O to select the city code whose setting you want to change Wait until the 6 Right Dial Hands complete their move to the time in the currently selected World Time City You will not be able to perform step 2 of this procedure until the hands stop moving 2 Hold down for about two seconds until the watch beeps This will cause the 4 Left Dial Hand to toggle between DST daylight saving time and STD standard time e Note that you cannot switch between STD standard time DST daylight saving time while UTC is selected as the World Time City e Note that the STD standard time DST daylight saving time setting affects only the currently selected time zone Other time zones are not affected E 53 Swapping your Home City and World Time City You can use the procedure below to swap your Home City and World Time City This capability can come in handy when you frequently travel
26. ng certain times of the year or day Radio interference may also cause problems with reception Mainflingen Germany or Anthorn England transmitters 500 kilometers 310 miles Fort Collins United States transmitter 600 miles 1 000 kilometers Fukushima or Fukuoka Saga Japan transmitters 500 kilometers 310 miles Shangqiu China transmitter 500 kilometers 310 miles e As of October 2010 China does not use Daylight Saving Time DST If China does go to the Daylight Saving Time system in the future some functions of this watch may no longer operate correctly E 22 e Using this watch in a country covered by a time calibration that is different from the countries it supports may result in incorrect time indication due to local application of summer time etc To get ready for a receive operation 1 Confirm that the watch is in the Timekeeping Mode If it isn t hold down for about two seconds to enter the Timekeeping Mode 2 Place the watch in a location where signal reception is good e Position the watch as shown in the nearby illustration with 12 o clock pointed towards a window Make sure there are no metal objects nearby e Signal reception normally is better at night ae or E 23 e The receive operation takes from two to seven minutes but in some cases it can take as long as 14 minutes Take care that you do not perform any button operation or move the watch during t
27. peration Level3 Level2 Level1 watch is in the power recovery mode 1 a a The hands will move to the correct positions and the watch will resume normal Outdoor sunlight 50 000 lux Sintes 2 hours 23 hours operation after power recovers in about 15 minutes Putting the watch in a location i where it is exposed to light will help power to recover sooner Window sunlight 10 000 lux 30 minutes 6 hours 85 hours eo on cloudy day 48 minutes 8 hours 138 hours Indoor fluorescent lighting 500 lux 8 hours 92 hours 1 Approximate exposure each day to generate power for normal daily operation 2 Approximate amount exposure time required to take power up one level e The above exposure times all are for reference only Actual exposure times depend on lighting conditions e For details about the operating time and daily operating conditions see the Power Supply section of the Specifications page E 73 E 14 E 15 Power Saving To recover from the sleep state Power Saving enters a sleep state automatically whenever the watch is left for a Move the watch to a well lit area or press any button certain period in an area where it is dark The table below shows how watch functions are affected by Power Saving e There actually are two sleep state levels second hand sleep and function sleep Elapsed Time in Dark Operation 60 to 70 minutes second hand 2 Second Hand only sto
28. pped at 12 o clock all other sleep functions enabled 6 or 7 days function sleep e All functions including analog timekeeping disabled e Internal timekeeping maintained e The watch will not enter a sleep state between 6 00 a m and 9 59 p m If the watch is already in a sleep state when 6 00 a m arrives however it will remain in the sleep state e The watch will not enter a sleep state while it is in the Stopwatch Mode or Countdown Timer Mode E 16 E 17 Radio Controlled Atomic Timekeeping This watch receives a time calibration signal and updates its time setting accordingly However when using the watch outside of areas covered by time calibration signals you will have to adjust the settings manually as required See Configuring Current Time and Date Settings Manually page E 38 for more information This section explains how the watch updates its time settings when the city code selected as the Home City is in Japan North America Europe or China and is one that supports time calibration signal reception If your Home City Code setting The watch can receive the signal from the is this transmitter located here LON PAR ATH Anthorn England Mainflingen Germany HKG Shangqiu City China TYO Fukushima Japan Fukuoka Saga Japan HNL ANC LAX DEN CHI NYC Fort Collins Colorado United States E 18 Important e The areas covered by HNL and ANC are quite far from the calibration si
29. pwatch Mode even if the watch s hands are still moving to tl Mode positions Note however that if the stopwatch was not re elapsed time operation timing will restart from where it was last from 0 e The 4 Left Dial Hand indicates the 1 20 second count for the fi y after entering the eir initial Stopwatch set after the last stopped and not rst 30 seconds of a stopwatch elapsed time operation After that the hand stops at 0 1 20 second timing continues internally after the first 30 seconds and the 4 Left Dial Hand will jump to the current value whenever Stop or Split is pressed E 46 Automatically switches to clockwise movement after the end of the countdown is reached to count up the seconds of the elapsed time operation 4 Left Dial Hand Points to TR Right Dial Hands Move counter clockwise to countdown the hours and minutes Automatically switch to clockwise movement after the end of the countdown is reached to count up the hours and minutes of the elapsed time operation E E 47 To specify the countdown start time 1 Use to move the 4 Left Dial Hand to TR 2 After confirming that the 2 Second Hand is stopped which indicates there is no ongoing countdown timer operation press e If the 2 Second Hand is moving press to stop it and then 3 Use and to specify the coun
30. r Y for some models or NO N to indicate the last signal reception result then to READY R 2 The 2 Second Hand indicates the operations the watch is currently performing When the 2 Second ies Hand is pointed here it means this READY R Watch is setting up for reception WORK W Reception is in progress Reception was completed YES Y successfully NO N Reception failed for some reason e If signal reception is unstable the 2 Second Hand may move between WORK W and READY R E 26 A 3 The receive operation is complete when the 2 Second Hand moves to YES Y or NO N for about five seconds and then resumes regular timekeeping e You can return to the Timekeeping Mode manually by pressing while the 2 Second Hand is pointing to YES Y or NO N e When the receive operation is successful the watch adjusts the time setting accordingly It does not adjust the setting if the operation failed Note e To interrupt a receive operation and return to the Timekeeping Mode press any button E 27 7 To check the result of the latest receive operation In the Timekeeping Mode press e The 2 Second Hand will move to YES Y for five seconds if the latest receive operation was successful or NO N if it was not After that regular timekeeping will resume e You ca
31. s in the correct home position If it doesn t use to move it to 12 o clock e Each press of in the home position adjustment mode will cycle through the adjustment settings as shown below i Z Second gt i Hour B Minute 5 24 hour gt B Right Dial Hands _5 7 Day Jt E 60 F Left Dial Hand p 5 3 After confirming that the 2 Second Hand is at the proper home position press This will switch to 1 Hour Hand and 3 Minute Hand home position adjustment e The O Hour Hand and 3 Minute Hand are at their proper home positions if they both move to 12 o clock The 5 Lower Dial Hand also will move along with 1 Hour Hand movement and cannot be adjusted individually If the hands are not positioned correctly use and to move them to their proper home positions 1 4 After confirming that the 1 Hour Hand and 3 Minute Hand are in their correct home positions press This will switch to 6 Right Dial Hands home position adjustment The 6 Right Dial Hands are at their proper home positions if they both move to 12 o clock If the hands are not positioned correctly use and to move them to 12 o clock
32. t the 5 Lower Dial Hand indicates the proper a m p m hour e If you want to change the date setting at this time press and perform the procedure starting from step 3 under To change the current date setting manually page E 41 To change the current date setting manually 1 In the Timekeeping Mode keep depressed for about five seconds as the 2 Second Hand goes through the following sequence e Moves to YES or Y for some models or NO N to indicate the last signal reception result then to READY R and then to the city code of the currently selected Home City 2 Press twice e The watch will beep and change to the year setting mode e The year can be set in the range of 2000 to 2099 3 Use and to change the year setting e Each press of will move the 4 Left Dial Hand and change the tens digit of the year setting Setting the year tens digit 5 After the time setting is the way you want press to return to the Timekeeping Mode e This will cause the 2 Second Hand to move automatically to 12 o clock and resume movement from there E 40 E 41 e Each press of will move the 2 Second Hand and A 7 Use and to change the 7 Day setting change the ones digit of the year setting e If you w
33. tdown start time e Each press of either button will move the 6 Right Dial Hands press one minute e Holding down or will start high speed hand movement in the applicable direction To stop high speed hand movement press any button e The maximum countdown start time setting is 24 hours To set a countdown start time of 24 hours move the 6 Right Dial Hands to 24 E 48 To perform a countdown timer operation o lt gt 0 gt 0 m Start Stop Restart 0 gt Stop Reset e Before starting a countdown timer operation check to make sure that the countdown timer is not already operating indicated by a moving 2 Second Hand If itis press to stop it and then to reset to the countdown start time e An alarm sounds for 10 seconds when the end of the countdown is reached This alarm will sound in all modes e While a countdown operation is in progress the 2 Second Hand and 6 Right Dial Hands move counterclockwise When the end of a countdown is reached the 2 Second Hand and 6 Right Dial Hands change direction and start moving clockwise to measure elapsed time after the end of the countdown The elapsed time operation continues until you press 8 to stop it e The maximum time measured by the elapsed time operation that starts after a countdown is complete is 23 hours 59 minutes 59 seconds
34. ting check your Home City setting and correct it if necessary page E 34 E The current time setting is off by one hour Possible Cause Remedy Page Perform the operation under To get ready for a receive operation The time setting E 23 Signal reception on a day for will be adjusted automatically as soon as switching between STD standard signal reception is successful time DST daylight saving time may If you are unable to receive the time have failed for some reason calibration signal change the STD E 36 standard time DST daylight saving time setting manually E 69 CASIO Operation Guide 5174 CASIO E Auto Receive is not performed or cannot perform Manual Receive E Signal reception is being performed successfully but the time and or day is wrong Possible Cause Remedy Page g Auto Receive is not performed while Possible Cause Remedy Page fei th tch is in the St tch Mod j i The watch is inthe Stopwatch Mode Countdown Timer Mode Hold down E 31 Your Home City setting is wrong rir osay Cy ano ana cored ea of Countdown Timer Mode for about two seconds to enter the Timekeeping Mode The watch may have been exposed Cheek H Cit w d 7 to magnetism or strong impact which Adjust the watch s hand and day home E59 i i eck your home City setting and correc z has caused problems with proper ositions Your Home City setting is wrong it if ne
35. ufficiently charged yet Continue keeping it exposed to light Time Calibration Signal The information in this section applies only when LON PAR ATH HNL ANC LAX DEN CHI NYC HKG or TYO is selected at the Home City You need to adjust the current time manually when any other city is selected as the Home City E 67 E The 2 Second Hand indicates NO N when I check the result of the latest receive operation Possible Cause Remedy Page e You are wearing or moving the watch or performing a button operation during the signal receive operation e The watch is in an area with poor reception conditions You are in an area where signal reception is not possible for some See Approximate Reception Ranges E 20 reason Keep the watch in an area where reception conditions are good while the signal receive E 23 operation is being performed e Check the website of the organization Th librati P li t bei that maintains the time calibration signal calibration signal is not being in your area for information about its transmitted for some reason down times e Try again later E 68 E The current time setting changes after set it manually You may have the watch configured for Auto Receive of the time calibration signal page E 25 which will cause the time to be adjusted automatically according to your currently selected Home City If this results in the wrong time set
36. ves to YES or Y for some models or NO N to indicate the last signal reception result then to READY R and then to the city code of the currently selected Home City e At this time the 4 Left Dial Hand will indicate the Home City s current daylight saving time setting STD or DST E 38 2 Change the Home City and daylight saving time DST settings if you want For details about these settings see steps 2 and 3 under To configure Home City settings page E 34 In the following steps each press of cycles between settings as shown below Home city DST 3 gt Hour Minute Year A Day lt Month 3 Press e The watch will beep and the 2 Second Hand and 4 Left Dial Hand will move to their 12 o clock positions This is the time setting mode E 39 CASIO CASIO Operation Guide 5174 4 Use and to change the time hour and minute setting e Each press of either button will move the hands 1 Hour Hand and 3 Minute Hand one minute e Holding down or will start high speed 1 Hour Hand and B Minute Hand movement in the applicable direction To stop high speed hand movement press any button e The 5 Lower Dial Hand and T Hour Hand move in sync with each other e When setting the time make sure tha
Download Pdf Manuals
Related Search