Home

FR1 and FR2 Video Card Frames

image

Contents

1. modules installed in the frame How the signal is distributed differs for the FR1 and FR2 frames Additionally individual modules can usually be strapped as to whether external reference is distributed from the frame or directly to BNCs on the module s corresponding cell group the 9 BNCs on the rear panel See the Note below for more information on looping reference inputs in the cell group FR1 Frame the external reference signal is distributed passively to all frame modules Cards installed in the frame should have FRAME reference selected and one and only one card in the frame should have TERMINATION set to ON All other cards in the frame should have TERMINATION set to OFF FR2 Frame the external reference signal is distributed by an in frame distribution amplifier to all frame modules This system terminates the Frame Reference input BNC and buffers the signal to all slots Cards installed in the FR2 frame should have FRAME set for reference select and all cards should have TERMINATION set to OFF EE VIDEO SYSTEMS Note Each cell group of 9 BNCs contain two BNCs that can be used for a looping reference connection for the corresponding card module If this method is used then the reference select setting on that module should be set to LOOP and the TERMINATION setting on the module should be set to OFF no termination Optionally if you re using only one of the looping reference BNCs then the TERMINATION setting
2. o utilizado durante longos per odos de tempo Avviso Utilizzare soltanto i collegamenti e gli accessori specificati e o venduti dal produttore quali il treppiedi e l esoscheletro Caution The FR1 FR2 front fan door is heavy and is not hinged Remove with Caution Attention La porte frontale du ventilateur de FR1 FR2 est lourde et ne repose pas sur des charni res Retirer avec pr caution Achtung Die vordere Gebl set r des FR1 FR2 ist schwer und l sst sich nicht klappen Bitte vorsichtig entfernen Precauci n La puerta del ventilador delantero del FR1 FR2 es pesada y no posee bisagras Extraer con precauci n Atenc o A porta frontal de acesso aos ventiladores do FR1 FR2 pesada e n o possui dobradicas Remova com cuidado Attenzione La porta anteriore della ventola FR1 FR2 pesante e non a cerniera Rimuovere con cautela
3. 55103 1 1996 EN61000 3 2 2006 EN61000 3 3 1995 A1 2001 A2 2005 Immunity EN 55103 2 1996 EN61000 4 2 1995 A1 1999 A2 2001 EN61000 4 3 2006 EN61000 4 4 2004 EN 61000 4 5 2005 EN 610004 6 2007 EN61000 4 11 2004 The product is also licensed for additional country specific standards as required for the International Marketplace Warning This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take appropriate measures Achtung Dieses ist ein Ger t der Funkst rgrenzwertklasse A In Wohnbereichen k nnen bei Betrieb dieses Ger tes Rundfunkst rungen auftreten in welchen F llen der Benutzer f r entsprechende Gegenma nahmen verantwortlich ist Attention Ceci est un produit de Classe A Dans un environnement domestique ce produit risque de cr er des interf rences radio lectriques il appartiendra alors l utilisateur de prendre les mesures sp cifiques appropri es E AJA VIDEO SYSTEMS Korea KCC Compliance Statement 1 Class A ITE 12 IE ATS A 170 219 Ana EE Sree e 3p 7 epe FA 9 9 x el opa AHEHE SA oe Ud 1 Class A device Class A Please note that this equipment has Broadcasting and obtained EMC registration for business Communication use Class A and it is intended to use in Equipment for Business Use other than home area Taiwan Compliance Statement AAA PRA NE gt SARA gt
4. ARE Ie TSA T3 gt HEBE F E REI IRSE S This is a Class A product based on the standard of the Bureau of Standards Metrology and Inspection BSMI CNS 13438 Class A Japanese Compliance Statement 1 Class A ITE COREL 7 7 AA Testis ole CT COR CE ER CEA d I CORDES t 5 amp itec d CENIDE CORA ciae DUIS TEES OKIE KEN amp cchb eUss VCCIl A This is a Class A product based on the standard of the VCCI Council VCCI V 3 2008 04 If this equipment is used in a domestic environment radio interference may occur in which case the user may be required to take corrective actions Translated caution statements warning conventions and warning messages The following caution statements warning conventions and warning messages apply to this product and manual Warning Symbol Hazard Warning Caution Symbol AJA FR1 and FR2 Video Card Frames User Manual Before operating your unit please read the instructions in this document Warning Read and follow all warning notices and instructions marked on the product or included in the documentation Avertissement Lisez et conformez vous tous les avis et instructions d avertissement indiqu s sur le produit ou dans la documentation Warnung Lesen und befolgen Sie die Warnhinweise und Anweisungen die auf dem Produkt angebracht oder in der Dokumentation enthalten sind iAdvertencia Lea y siga todas las instrucciones y advertencias marcadas en el producto o
5. incluidas en la documentaci n Aviso Leia e siga todos os avisos e instruc es assinalados no produto ou inclu dos na documentac o Avviso Leggere e seguire tutti gli avvisi e le istruzioni presenti sul prodotto o inclusi nella documentazione Warning Do not use this device near water and clean only with a dry cloth Avertissement N utilisez pas cet appareil pr s de l eau et nettoyez le seulement avec un tissu sec Warnung Das Ger t nicht in der N he von Wasser verwenden und nur mit einem trockenen Tuch s ubern Advertencia No utilice este dispositivo cerca del agua y l mpielo solamente con un pa o seco Aviso N o utilize este dispositivo perto da gua e limpe o somente com um pano seco Avviso Non utilizzare questo dispositivo vicino all acqua e pulirlo soltanto con un panno asciutto Warning Do not block any ventilation openings Install in accordance with the manufacturer s instructions Avertissement Ne bloquez aucune ouverture de ventilation Suivez les instructions du fabricant lors de l installation Warnung Die L ftungs ffnungen d rfen nicht blockiert werden Nur gem den Anweisungen des Herstellers installieren iAdvertencia No bloquee ninguna de las aberturas de la ventilaci n Instale de acuerdo con las instrucciones del fabricante Aviso N o obstrua nenhuma das aberturas de ventilac o Instale de acordo com as instruc es do fabricante Avviso Non ostruire le apertur
6. marche pas dessus ou qu on le pince en particulier au niveau des prises m les des r ceptacles de convenance et l endroit o il sort de l appareil Warnung Es muss verhindert werden auf das Netzanschlusskabel zu treten oder dieses zu knicken besonders an den Steckern den Steckerbuchsen und an dem Punkt an dem das Kabel aus dem Ger t heraustritt iAdvertencia Puesto que el enchufe de la red el ctrica se utiliza como dispositivo de desconexi n debe seguir siendo f cilmente accesible y operable AJA VIDEO SYSTEMS Aviso Proteja o cabo de alimentac o de ser pisado ou de ser comprimido particularmente nas fichas em tomadas de parede de conveni ncia e no ponto de onde sai do dispositivo Avviso Proteggere il cavo di alimentazione in modo che nessuno ci cammini sopra e che non venga schiacciato soprattutto in corrispondenza delle spine e del punto in cui esce dal dispositivo Warning Unplug this device during lightning storms or when unused for long periods of time Avertissement D branchez cet appareil pendant les orages avec clairsou s il est inutilis pendant de longues p riodes Warnung Das Ger t ist bei Gewitterst rmen oder wenn es ber lange Zeitr ume ungenutzt bleibt vom Netz zu trennen iAdvertencia Desenchufe este dispositivo durante tormentas el ctricas o cuando no se lo utilice por largos periodos del tiempo Aviso Desconecte este dispositivo da tomada durante trovoadas ou quando n
7. should be set to ON User Controls Power Supply Monitoring RJ45 Port Standard RJ45 10BaseT style connector offers access for monitoring power supply voltages see pinout at back of manual from the power supply or supplies in the case of the FR2 AC Power Connectors The FR1 FR2 have one AC power connection socket the FR1 D FR2 D have two one for each of their power supplies these models offer redundant power supplies vw Power LEDs 2 The PS1 and PS2 LEDs on the FR1 FR2 front door indicate which if any power supply is currently powered up and supplying 4 power to the frame modules You can tell at a 4 glance if a supply is powered up and functional by its associated LED Note Ifthe front door is removed while power is applied the fans in the front door and the power monitoring LEDs will not operate until the door is replaced Installation Typically installation consists of the following 1 remove the FR1 FR2 front panel aA uu bb Y N disconnect power from the frame remove line cord install AJA R series or other industry standard card modules apply external color black reference at the frame s External Reference BNC replace the FR1 FR2 front panel door apply power to the frame by connecting a north american style power cord from the frame to mains power 90 to 260 VAC Please follow all manufacturer s instructions for the video cards being installed notin
8. IN LIEU OF ANY OTHER WARRANTIES EXPRESS OR IMPLIED AJA VIDEO AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AJA VIDEO S RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE WHOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER AJA VIDEO OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES Important Safety Information See the Safety amp Regulatory information in Appendix A at the back of this manual AJA FR1 and FR2 Video Card Frames User Manual Introduction The AJA FR1 and FR2 are multiple card frames that support both AJA s R series video card modules and other industry standard modules They bring high density packaging high capacity power supplies and forced fan cooling to your rack so you don t need to reserve space above or below the frames Model FR1 The FR1 frame offers space for four modules in a 1 RU space AJA s own R5 and R20 modules fit into the frame as well as industry standard modules Color black reference can be connected at a rear panel BNC for distribution passively to all frame modules Model FR2 The FR2 frame provides greater space housing up to ten modules in a 2 RU space Like the FR1 the FR2 supports both AJA s own R series modules as well as industry standard modules Color black reference in the FR2 is also distributed to all module
9. alimentatore quando si sposta l unit Hazard Warning High Voltage This situation or condition can cause injury due to electric shock Avertissement Tension lev e Cette situation ou condition peut causer des blessures dues un choc lectrique Warnung Hochspannung Diese Situation oder Bedingung kann zu Verletzungen durch Stromschlag f hren iAdvertencia Alto voltaje Esta situaci n o condici n puede causar lesiones debidas a una descarga el ctrica Aviso Alta Tens o Esta situac o ou condic o pode causar danos devido a choques el tricos Avviso Alta tensione Questa situazione o condizione pu causare lesioni a causa di scosse elettriche Warning Only use attachments and accessories specified and or sold by the manufacturer Avertissement Utilisez seulement les attaches et accessoires sp cifi s et ou vendus par le fabricant Warnung Verwenden Sie nur Zusatzger te und Zubeh r angegeben und oder verkauft wurde durch den Hersteller iAdvertencia Utilice solamente los accesorios y conexiones especificados y o vendidos por el fabricante Aviso Utilize apenas equipamentos acess rios especificados e ou vendidos pelo fabricante Avviso Utilizzare soltanto i collegamenti e gli accessori specificati e o venduti dal produttore Warning Ensure Mains Power is disconnected before installing the FR1 or FR2 frame R series modules into the frame or installing and removing options If a Mai
10. contra danificado a quando foi derramado l quido ou ca ram objectos sobre o dispositivo quando o dispositivo foi exposto chuva ou humidade quando n o funciona normalmente ou quando foi deixado cair Avviso Fare riferimento al personale qualificato per tutti gli interventi di assistenza L assistenza necessaria quando il dispositivo stato danneggiato in qualche modo ad esempio se il cavo di alimentazione o la spina sono danneggiati stato rovesciato del liquido stato rovesciato o qualche oggetto caduto nel dispositivo il dispositivo stato esposto a pioggia o umidit non funziona correttamente o caduto Caution This device is a Class A product Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to take whatever measures may be necessary to correct the interference at their own expense Attention Le p riph rique est un produit de Classe A Le fonctionnement de cet quipement dans une zone r sidentielle risque de causer des interf rences nuisibles auquel cas l utilisateur devra y rem dier ses propres frais Achtung Dies ist ein Ger t der Klasse A Bei Einsatz des Ger ts in Wohngebieten kann es St rungen des Radio und Fernsehempfangs verursachen In diesem Fall muss der Benutzer alle notwendigen Ma nahmen ergreifen die m glicherweise n tig sind um die St rungen auf eigene Rechnung zu beheben Precauci n Est
11. e di ventilazione Installare in conformit con le istruzioni del fornitore Warning Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Avertissement N installez pas l appareil pr s d une source de chaleur telle que des radiateurs des bouches d air de chauffage des fourneaux ou d autres appareils amplificateurs compris qui produisent de la chaleur Warnung Nicht in der N he von W rmequellen wie Heizk rpern Heizregistern Ofen oder anderen W rme erzeugenden Ger ten einschlief3lich Verst rkern aufstellen AJA VIDEO SYSTEMS Advertencia No instale cerca de fuentes de calor tales como radiadores registros de calor estufas u otros aparatos incluidos amplificadores que generan calor Aviso N o instale perto de nenhuma fonte de calor tal como radiadores sa das de calor fog es ou outros aparelhos incluindo amplificadores que produzam calor Avviso Non installare vicino a fonti di calore come termosifoni diffusori di aria calda stufe o altri apparecchi amplificatori compresi che emettono calore Warning Refer all servicing to qualified service personnel Servicing is required when the device has been damaged in any wav such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the device the device has been exposed to rain or moisture does not operate normally or has bee
12. e es un producto clase A El uso de este equipo en reas residenciales puede causar interferencias nocivas en cuyo caso se requerir que los usuarios tomen cualquier medida necesaria para corregir la interferencia por cuenta propia AJA FR1 and FR2 Video Card Frames User Manual Cuidado Este dispositivo um produto Classe A Operar este equipamento em uma rea residencial provavelmente causar interfer ncia prejudicial neste caso espera se que os usu rios tomem as medidas necess rias para corrigir a interfer ncia por sua pr pria conta Attenzione Questo dispositivo un prodotto di Classe A II funzionamento di questo apparecchio in aree residenziali potrebbe causare interferenze dannose nel cui caso agli utenti verr richiesto di adottare tutte le misure necessarie per porre rimedio alle interferenze a proprie spese Warning Disconnect the external AC power supply line cord s from the mains power before moving the unit Avertissement Retirez le ou les cordons d alimentation en CA de la source d alimentation principale lorsque vous d placez l appareil Warnung Trennen Sie die Wechselstrom Versorgungskabel vom Netzstrom bevor Sie das Ger t verschieben iAdvertencia Cuando mueva la unidad desenchufe de la red el ctrica el los cable s de la fuente de alimentaci n CA tipo brick Advert ncia Remova os cabos CA de alimentac o brick da rede el trica ao mover a unidade Avvertenza Scollegare il cavo dell
13. ee that interference will not occur in a particular installation Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Canadian ICES Statement Canadian Department of Communications Radio Interference Regulations This digital apparatus does not exceed the Class A limits for radio noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This Class A digital apparatus complies with Canadian ICES 003 R glement sur le brouillage radio lectriq
14. fective product In order to obtain service under this warranty you the Customer must notify AJA Video of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service The Customer shall be responsible for packaging and shipping the defective product to a designated service center nominated by AJA Video with shipping charges prepaid AJA Video shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the AJA Video service center is located Customer shall be responsible for paying all shipping charges insurance duties taxes and any other charges for products returned to any other locations This warranty shall not apply to any defect failure or damage caused by improper use or improper or inadequate maintenance and care AJA Video shall not be obligated to furnish service under this warranty a to repair damage resulting from attempts by personnel other than AJA Video representatives to install repair or service the product b to repair damage resulting from improper use or connection to incompatible equipment c to repair any damage or malfunction caused by the use of non AJA Video parts or supplies or d to service a product that has been modified or integrated with other products when the effect of such a modification or integration increases the time or difficulty of servicing the product THIS WARRANTY IS GIVEN BY AJA VIDEO
15. g any cautions or special instructions Instructions for removing the front door for module installation and power supply exchange removal FR2 only are provided in the following discussions AJA FR1 and FR2 Video Card Frames User Manual Front Door To remove the front door firmly grasp both removal knobs and rotate them in opposite Removal directions Hang on to the knobs so that as the door releases you can hold on to the Installation door and remove it without it falling off Caution The FR1 FR2 front fan door is heavy and is not hinged Remove with Caution Power Supply To remove an FR2 power supply follow these steps Removal FR2 Warning Ensure Mains Power is disconnected before installing the FR1 or FR2 frame R series modules into the frame or installing and removing options If a Mains switch is not provided the power cord s of this equipment provide the means of disconnection The socket outlet must be installed near the equipment and must be easily accessible Warning FR2 Dual Power Cord Notice please read this To reduce the risk of electrical shock disconnect both power cords before servicing equipment 1 Remove the frame front panel door as explained earlier 2 Locate which of the two supplies you wish to remove On the rear panel remove the strain relief screw that secures the power supply to the frame saving the Screw 3 From the front of the frame grasp the two pull handles on the fro
16. l Power LEDs on front panel show power status e Compatible with common industry frames video cards only Leitch 6800 series Power Supply Sockets For Line Cords Frame N Reference 000 909 0000 o o O o mm A A AA AO ASA A ACC 0000 0000 0000 Cell 4 Cell 3 Cell 2 Cell 1 J31 to J21 to J11 to J1 to RJ45 J39 J29 J19 J9 FR1 Multiple Card Frame Rear Panel Connectors AJA FR1 and FR2 Video Card Frames User Manual E Power Supply Sockets For Line Cords Frame Reference o aam 5 DTL4 Y YA AR Cell 10 Cell9 Cell8 Cell7 Cell6 Cell5 Cell4 Cell3 Cell2 Cell 1 J91to J81to J71to J61to J51to J41to J31to J21to J11to Jito one J99 J89 J79 J69 J59 J49 J39 J23 J9 J9 Supply Relief Screws must remove to replace supply FR2 Multiple Card Frame Rear Panel Connectors Input Output BNCs groups of 9 per cell Each unique slot in the FR1 FR2 frames connect to a group of 9 BNCs on the frame rear panel The actual function of the BNC connectors is dependent on the video card installed Each group of 9 BNCs corresponds to the card installed in the same position for example the right most card connects to the right most group of connectors at the position on the rear panel Frame Reference BNC Both the FR1 and FR2 frames have this frame reference input BNC connector which feeds an external reference video signal to all
17. le el ctrico FR2 dual Por favor leer Para reducir el riesgo de electrocuci n desconecte ambos cables el ctricos antes de reparar el equipo Advert ncia Aviso do cabo duplo de alimenta o FR2 leia isto Para reduzir o risco de choque el trico desconecte ambos os cabos de alimentac o antes de qualquer manutenc o no equipamento Avvertenza Avviso cavo a doppia potenza FR2 Per ridurre il rischio di scosse elettriche scollegare entrambi i cavi di alimentazione prima di effettuare qualsiasi operazione di manutenzione Warning Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet AJA FR1 and FR2 Video Card Frames User Manual Avertissement La s curit de la prise polaris e ou de la prise de type mise la terre ne doit en aucun cas tre emp ch e de fonctionner Une prise polaris e a deux broches l une tant plus large que l autre Une prise de type mise la terre a deux broches et une troisi me broche pour la mise la terre La broche large ou la troisi me broche sont fournies pour votre s curit Si la prise fournie ne s ins re pas dans votre prise femelle consultez un lectricien p
18. n dropped Avertissement R f rez vous au personnel de service qualifi pour tout entretien L entretien est exig quand l appareil a t endommag de quelque mani re que ce soit par exemple lorsque le cordon d alimentation ou la prise sont endommag s que du liquide a t vers ou des objets sont tomb s dans l appareil que l appareil a t expos la pluie ou l humidit ne fonctionne pas normalement ou est tomb Warnung Das Ger t sollte nur von qualifizierten Fachkr ften gewartet werden Eine Wartung ist f llig wenn das Ger t in irgendeiner Weise besch digt wurde wie bei besch digtem Netzkabel oder Netzstecker falls Fl ssigkeiten oder Objekte in das Ger t gelangen das Ger t Regen oder Feuchtigkeit ausgesetzt wurde nicht ordnungsgem funktioniert oder fallen gelassen wurde iAdvertencia Consulte al personal calificado por cuestiones de reparaci n El servicio de reparaci n se requiere cuando el dispositivo ha recibido cualquier tipo de dario por ejemplo cable o espigas da adas se ha derramado l quido o se han ca do objetos dentro del dispositivo el dispositivo ha sido expuesto a la lluvia o humedad o no funciona de modo normal o se ha ca do Aviso Remeta todos os servicos de manutenc o para o pessoal de assist ncia qualificado A prestac o de servicos de manutenc o exigida quando o dispositivo foi danificado mediante qualquer forma como um cabo de alimentac o ou ficha que se en
19. ns switch is not provided the power cord s of this equipment provide the means of disconnection The socket outlet must be installed near the equipment and must be easily accessible AJA VIDEO SYSTEMS Avertissement S assurer que la source principale d alimentation est d branch e avant d installer les modules des cartes s rie R de bo tier FR1 ou FR2 sur l appareil ou avant d installer ou de supprimer des options Si aucun commutateur principal n est fourni le ou les cordons d alimentation de cet quipement fournissent le moyen n cessaire pour le d branchement La prise doit tre install e pr s de l quipement et doit tre facilement accessible Warnung Vor der Installation der FR1 oder FR2 Steckkartenmodule der R Serie in den Rahmen bzw vor der Installation oder dem Entfernen von Optionen muss sichergestellt werden dass der Netzstrom ausgeschaltet bzw abgetrennt ist Wenn kein Netzschalter verf gbar ist kann der Netzstrom mithilfe des der Netzkabel s am Ger t getrennt werden Die Steckdose muss in der Nahe des Ger ts installiert und leicht zug nglich sein iAdvertencia Aseg rese de que la energ a de la red de electricidad est desconectada antes de instalar el m dulo de tarjeta de cuadro FR1 o FR2 serie R dentro del cuadro o antes de instalar o desinstalar opciones Si el interruptor de la red el ctrica no se encuentra disponible desconecte el los cable s el ctrico s del equipo La toma de corriente debe se
20. nt of the desired power supply and gently pull it out of the frame Installation of a new supply is the reverse of this removal procedure m Rear of FR2 Panel Remove screw from desired supply Front of FR2 Panel Door Removed Grasp Supply By Its Handle and Pull Out FR2 Power Supply Removal BE AJA VIDEO SYSTEMS Note FR1 power supply replacement requires disassembly of the chassis frame It is not user serviceable power supply replacement should be referred to a qualified AJA service center Warning Disconnect the external AC power supply line cord s from the mains power before moving the unit Specifications FR1 Specifications Capacity 4 slots 1 Rack Unit Inputs Group of 9 BNCs I O for each module 4 groups Reference Input BNC Power 50 Watt Capacity Universal Input 90 240 VAC Power Supply Optional Redundant Power Supply Diode Isolated Physical Dimensions Width 19 Height 1 75 Depth 14 75 Rack Units 1 Compatibility Leitch 6800 series FR1 PS Power Supply Module for FR1 Frame Models FR1 FH1 frame with one power supply FR1 D FH1 frame with two redundant power supplies FR2 Specifications Capacity 10 slots 2 Rack Units Inputs Group of 9 BNCs I O for each module 10 groups Reference Input BC active DA to all slots Power 100 Watt Capacity Universal Input 90 240 VAC Power Supply Optional Redundant Power Supply Diode Isolated AJA FR1 and FR2 Video Ca
21. on compromettere la sicurezza della spina polarizzata o con messa a terra Una spina polarizzata ha due spinotti di cui uno pi largo Una spina con messa a terra ha due spinotti e un terzo polo per la messa a terra Lo spinotto largo o il terzo polo sono forniti per motivi di sicurezza Se la spina fornita non si inserisce nella presa di corrente contattare un elettricista per la sostituzione della presa obsoleta Warning Since the Mains plug is used as the disconnection for the device it must remain readily accessible and operable Avertissement Puisque la prise principale est utilis e pour d brancher l appareil elle doit rester ais ment accessible et fonctionnelle Warnung Da der Netzstecker als Trennvorrichtung dient muss er stets zug nglich und funktionsf hig sein iAdvertencia Puesto que el enchufe de la red el ctrica se utiliza como dispositivo de desconexi n debe seguir siendo f cilmente accesible y operable Aviso Dado que a ficha principal utilizada como a desconex o para o dispositivo esta deve manter se prontamente acess vel e funcional Avviso Poich il cavo di alimentazione viene usato come dispositivo di sconnessione deve rimane prontamente accessibile e operabile Warning Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the device Avertissement Prot gez le cordon d alimentation pour que l on ne
22. our le remplacement de la prise femelle obsol te Warnung Der Sicherheitszweck des gepolten bzw Schukosteckers ist zu ber cksichtigen Ein gepolter Stecker verf gt ber zwei Pole von denen einer breiter als der andere ist Ein Schukostecker verf gt neben den zwei Polen noch ber einen dritten Pol zur Erdung Der breite Pol bzw der Erdungspol dienen der Sicherheit Wenn der zur Verf gung gestellte Stecker nicht in Ihren Anschluss passt konsultieren Sie einen Elektriker um den veralteten Anschluss zu ersetzen iAdvertencia No eche por tierra la finalidad del tipo de enchufe polarizado con conexi n a tierra Un enchufe polarizado tiene dos espigas una m s ancha que la otra Un enchufe con conexi n a tierra tiene dos espigas iguales y una tercera espiga que sirve para la conexi n a tierra La expiga ancha o la tercera espiga sirven para su seguridad Si el enchufe suministrado no encaja en el tomacorriente consulte con un electricista para reemplazar el tomacorriente obsoleto Aviso N o anule a finalidade da seguranca da ficha polarizada ou do tipo ligac o terra Uma ficha polarizada tem duas l minas sendo uma mais larga do que a outra Uma ficha do tipo de ligac o a terra tem duas l minas e um terceiro terminal de ligac o terra A l mina larga ou o terceiro terminal sao fornecidos para sua seguranca Se a ficha fornecida nao couber na sua tomada consulte um electricista para a substituic o da tomada obsoleta Avviso N
23. r instalada cerca del equipo y debe estar f cilmente accesible Advert ncia Certifique se de que a alimentac o principal esteja desconectada antes de instalar os cart es R series FR1 ou FR2 no quadro ou ao instalar e desinstalar opcionais Se nao houver um interruptor de alimentac o principal o pr prio cabo de alimentac o do equipamento o meio de desconex o A tomada de alimenta o deve ser instalada pr xima ao equipamento e seu acesso deve ser f cil Avvertenza Verificare che la rete di alimentazione sia scollegata prima di installare i moduli FR1 o FR2 serie R nel telaio o installare o rimuovere le opzioni Se non disponibile un interruttore di alimentazione il i cavo i di alimentazione di questa apparecchiatura forniscono i mezzi di sconnessione La presa deve essere installata vicino all apparecchio e deve essere facilmente accessibile Warning FR2 Dual Power Cord Notice please read this To reduce the risk of electrical shock disconnect both power cords before servicing equipment Avertissement Notice relative aux doubles cordons d alimentation de FR2 veuillez lire Pour r duire le risque de choc lectrique d branchez les deux cordons d alimentation avec d effectuer tout entretien de l quipement Warnung Hinweis zum FR2 mit doppeltem Netzkabel bitte beachten Um das Risiko eines Elektroschocks zu verringern sind beide Netzkabel vor der Wartung des Ger ts abzutrennen iAdvertencia Aviso Cab
24. rd Frames User Manual EH Physical Dimensions Width 19 Height 3 5 Depth 13 Rack Units 2 Compatibility Leitch 6800 series FR2 PS Power Supply Module for FR2 Frame Models FR2 FR2 frame with one FR2 PS power supply FR2 D FR2 frame with dual power supplies FR2 PS FR2 Power supply FR1 FR2 Power The power supply outputs can be monitored via the RJ45 connector on the rear panel Monitoring The following diagram shows the pinouts where supply values can be measured Description RJ45 Connector on Rear Panel 6 5 Volts PS2 1 6 5 Volts PS1 2 ara Pin Numbers Serial Com Port Serial Com Port Ground 6 5 Volts PS2 6 5 Volts PS1 Pinout for RJ45 Connector On Rear Panel ON DOO KR CO AJA VIDEO SYSTEMS Appendix A Safety amp Compliance Federal Communications Commission FCC Compliance Notices Class A This equipment has been tested and found to comply with the limits for a Class A digital Interference device pursuant to Part 15 Subpart B of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a commercial installation This Statement equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarant
25. s but it s actively distributed rather than passively Optional redundant power supplies are available for the FR2 frame and all power supplies are easily hot swapped from the front of the unit one screw on the rear panel must be removed on each power supply prior to removal Features The FR1 and FR2 frames offer a variety of unique features for easy connectivity and ease of installation in any environment FR1 and FR2 Frames FR1 Features Dual fan forced air cooling e Optional redundant power supply diode isolated Universal power supply is auto ranging from 90 to 240 VAC with 50 Watts capacity 4 module slots cells e Each module cell is provided with 9 BNC inputs or outputs e Single frame reference BNC distributes passively to all cells e Remote power supply monitoring via RJ45 port on rear panel Power LEDs on front panel show power status e Compatible with common industry frames video cards only Leitch 6800 series E AJA FR2 Features e Triple fan forced air cooling inside removable access door e Hot swappable power supplies e Optional redundant power supplies diode isolated Universal power supply is auto ranging from 90 to 240 VAC with 100 Watts capacity e 10 module slots cells e Each module cell is provided with 9 BNC inputs or outputs e Single frame reference BNC distributes actively to all cells via an internal distribution amplifier e Remote power supply monitoring via RJ45 port on rear pane
26. ue du minist re des Communications Cet appareil num rique respecte les limites de bruits radio lectriques visant les appareils num riques de classe A prescrites dans le R glement sur le brouillage radio lectrique du minist re des Communications du Canada Cet appareil num rique de la Classe A est conforme la norme NMB 003 du Canada AJA FR1 and FR2 Video Card Frames User Manual European Union and European Free Trade Association EFTA Regulatory Compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the European Free Trade Association These countries listed in the following paragraph are referred to as The European Community throughout this document AUSTRIA BELGIUM BULGARIA CYPRUS CZECH REPUBLIC DENMARK ESTONIA FINLAND FRANCE GERMANY GREECE HUNGARY IRELAND ITALY LATVIA LITHUANIA LUXEMBOURG MALTA NETHERLANDS POLAND PORTUGAL ROMANIA SLOVAKIA SLOVENIA SPAIN SWEDEN UNITED KINGDOM ICELAND LICHTENSTEIN NORWAY SWITZERLAND Declaration of Marking by this symbol indicates compliance with the Essential Requirements of the EMC Conformity Directive of the European Union 2004 108 EC This equipment meets the following conformance standards Safety CB IEC 60065 2001 A1 2005 NRTL UL 60065 2003 R11 06 CSA C22 2 NO 60065 2003 A1 06 GS EN 60065 2002 A1 Additional licenses issued for specific countries available on request Emissions EN
27. www aja com FR1 and FR2 Video Card Frames Models FR1 FR1 D FR2 and FR2 D Published 7 13 10 Installation and Operation Guide Because it matters VIDEO SYSTEMS AJA VIDEO SYSTEMS AJA lo and Kona are trademarks of AJA Video Inc All other trademarks are the property of their respective holders Notice Copyright 2010 AJA Video Inc All rights reserved All information in this manual is subject to change without notice No part of the document may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying or recording without the express written permission of AJA Inc Contacting Support To contact AJA Video for sales or support use any of the following methods 180 Litton Drive Grass Valley CA 95945 USA Telephone 1 800 251 4224 or 1 530 274 2048 Fax 1 530 274 9442 Web http www aja com Support Email support aja com Sales Email sales aja com When calling for support have all information on the product serial number etc at hand prior to calling Limited Warranty AJA Video warrants that this product will be free from defects in materials and workmanship for a period of five years from the date of purchase If a product proves to be defective during this warranty period AJA Video at its option will either repair the defective product without charge for parts and labor or will provide a replacement in exchange for the de

Download Pdf Manuals

image

Related Search

Related Contents

高濃度ガス検知器コスモテクター XP-3140  Ghostscript User Manual - Directory has no index file.  Starlight 650TVL Bullet Camera  Operating Instructions Air Conditioner  

Copyright © All rights reserved.
Failed to retrieve file