Home

Manual - LevelOne

1. 3 LOG_ERR 4 LOG_WARNING 5 LOG_NOTICE 6 LOG_INFO 7 LOG_DEBUG Group privacymask_c lt 0 n 1 gt for n channel product NAME VALUE SECURITY DESCRIPTION get set enable lt boolean gt 4 4 Enable the privacy mask win_i lt 0 4 gt _ enable lt boolean gt 4 4 Enable the privacy mask window win_i lt 0 4 gt _name string 14 4 4 The name of privacy mask window win_i lt 0 4 gt _left 0 320 352 4 4 Left coordinate of window position win_i lt 0 4 gt _top 0 240 288 4 4 Top coordinate of window position win_i lt O0 4 gt _width 0 320 352 4 4 Width of privacy mask window win_i lt 0 4 gt _height 0 240 288 4 4 Height of privacy mask window Group capability NAME VALUE SECURITY DESCRIPTION get set api_http_version 0200a 0 7 The HTTP API version bootuptime lt positive 0 7 The server bootup time integer gt nir 0 0 7 number of IR interface lt positive integer gt ndi 0 0 7 number of digital input lt positive integer gt ndo O 0 7 number of digital output lt positive integer gt naudioin 0 0 7 number of audio input lt positive integer gt naudioout 0 0 7 number of audio output lt positive integer gt nvideoin lt positive 0 7 number of video input integer gt nmediastream lt positive 0 7 number of media stream per integer gt channel
2. options 6 admin anonymous viewer Administrator s access right can fully control the dido camctrl operator camera s operation admin 7 N A Internal parameters Unable to be changed by any external interface Get server parameter values Note The access right depends on the URL directory Method GET POST Syntax http lt servername gt cgi bin anonymous getparam cgi lt parameter gt amp lt parameter gt http lt servername gt cgi bin viewer getparam cgi lt parameter gt amp lt parameter gt http lt servername gt cgi bin operator getparam cgi lt parameter gt amp lt parameter gt http lt servername gt cgi bin admin getparam cgi lt parameter gt amp lt parameter gt where the lt parameter gt should be lt group gt _ lt name gt or lt group gt lt name gt If you do not specify the any parameters all the parameters on the server will be returned If you specify only lt group gt the parameters of related group will be returned When query parameter values the current parameter value are returned Successful control request returns paramter pairs as follows Return HTTP 1 0 200 OK r n Content Type text html r n Context Length lt length gt r n r n lt parameter pair gt where lt parameter pair gt is lt parameter gt lt value gt r in lt parameter pair gt lt length gt is the actual len
3. Multicast RTCP video port The video channel port for multicast RTCP It must be the port number of multicast video port plus 1 Multicast audio port The audio channel port for multicast It must be an even number Multicast RTCP audio port The audio channel port for multicast RTCP It must be the port number of multicast audio port plus 1 Multicast TTL It specifies the number of routers hops that multicast traffic is permitted to pass through before expiring on the network IP Filtering FCS 5030 IP Network Camera w IR Live View Local Settings Allowed list System Configuration Basic Starting iP address Network Ending IP address Video Audio Add i System User Management Delete allowed list E Advanced r T Allowed list 1 0 0 0 255 255 255 255 IP Fifterin oo Delete Motion detection j i Event Setup Denied list Recording i Peripherals Starting IP address amp System log Ending iP address Maintenance linias Add Version 01000 Delete denied list Denied list X Delete The access list is to control the access permission of clients by checking the client IP address There are two lists for permission control Allow List and Deny List Only those clients whose IP address is in the Allow List and not in the Deny List can connect to the Video Server or Network Camera for receiving the audio video streaming Both Allow List and Deny List consist of a lis
4. System RAM 64MB SDRAM ROM 8MB FLASH ROM Networking Protocol TCP IP HTTP SMTP FTP DDNS UPnP Telnet NTP DNS DHCP and RTSP Physical 10 baseT or 100 baseT Fast Ethernet auto negotiation Video Algorithm supported MPEGA simple profile for streaming video JPEG for still image Features Adjustable image size quality and bit rate Time stamp and text overlay 3 motion detection windows Resolution 704x480 pixels NTSC 704x576 pixels PAL Camera Specification 1 3 inch colour CCD 176x120 30 25fps 352x240 30 25fps 704x480 30 25fps OLux F2 0 when IR on Lens 8mm F2 0 IR LEDs 12 crystal IR LEDs for night view up to 30 meters Audio AAC GSM AMR Dimension 158mm L x 105mm W x 108mm H Weight NET 1010g Power 12V 1 5A Operating Environment Temperature 0 50 C 32 122 F Humidity 95 RH EMI amp Safety CE FCC Viewing system requirement Operating system Microsoft Windows 2000 XP VISTA Browser Internet Explorer 6 x or above Firefox 1 5 0 x or above Technology License Notice MPEG 4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG 4 AAC AUDIO PATENT LICENSE THIS PRODUCT MAY NOT BE DECOMPILED REVERSE ENGINEERED OR COPIED EXCEPT REGARD TO PC SOFTWARE YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES FOR MORE INFORMATION PLEASE REFER TO HTTP WWW VIALICENSING COM MPEG 4 Visual Technology THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT POR
5. 6 6 Indicate which weekday is scheduled One bit represents one weekday The bit0 LSB indicates Saturday The bit1 indicates Friday The bit2 indicates Thursday The bit3 indicates Wednesday The bit4 indicates Tuesday The bit5 indicates Monday The bit6 indicates Sunday For example to detect events on Friday and Sunday set weekday as 66 begintime hh mm 6 6 Begin time of weekly schedule endtime hh mm 6 6 End time of weekly schedule 00 00 24 00 means always prefix string 16 6 6 Indicate the prefix of the filename cyclesize lt integer gt 6 6 The maximum size for cycle recording in Kbytes maxfilesize 200 6000 6 6 The max size for one file in Kbytes dest 0 4 6 6 The destination to store the recording data 0 4 means the index of network storage Drive the digital output Note This request requires the privilege of viewer Method GET POST Syntax http lt servername gt cgi bin dido setdo cgi do1 lt state gt amp do2 lt state gt amp do3 lt state gt amp do4 lt state gt amp return lt return page gt Where state is 0 1 O means inactive or normal state while 1 means active or triggered state PARAMETER VALUE DESCRIPTION do lt num gt 0 1 0 inactive normal state 1 active triggered state return lt return pag
6. LevelOne FCS 5030 IP Network Camera w Infrared LEDs User Manual Ver 1 2 0 1106 Before You Use This Product The use of surveillance devices may be prohibited by law in your country The Network Camera is not only a high performance web ready camera but also can be part of a flexible surveillance system It is the user s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use It is important to first verify that all contents received are complete according to the list in the Package Contents chapter Take notice of the warnings before the Network Camera is installed then carefully read and follow the instructions in the Installation chapter to avoid damages due to faulty assembly and installation This also ensures the product is used properly as intended The Network Camera is a network device and its use should be straightforward for those who have basic network knowledge The Troubleshooting chapter in the Appendix provides remedies to the most common errors in set up and configuration You should consult this chapter first if you run into a system error The Network Camera is designed for various applications including video sharing general security surveillance etc The How to Use chapter suggests ways to best utilize the Network Camera and ensure proper operations For the creative and professional developers the URL Commands of The Netwo
7. 7 6 User s password user_i0_privilege admin 6 7 Root s privilege user_i lt 1 20 gt _ viewer 6 6 User s privilege privilege operator admin Group network NAME VALUE SECURITY DESCRIPTION get set type lan 6 6 Network connection type pppoe resetip lt boolean gt 6 6 1 gt get ipaddress subnet router dnsi dns2 from DHCP server at next reboot 0 gt use preset ipaddress subnet rounter dns1 and dns2 ipaddress lt ip address gt 6 6 IP address of server subnet lt ip address gt 6 6 subnet mask router lt ip address gt 6 6 default gateway dns1 lt ip address gt 6 6 primary DNS server dns2 lt ip address gt 6 6 secondary DNS server wins1 lt ip address gt 6 6 primary WINS server wins2 lt ip address gt 6 6 secondary WINS server Subgroup of network ftp NAME VALUE SECURITY DESCRIPTION get set port 21 6 6 local ftp server port 1025 65535 Subgroup of network http NAME VALUE SECURITY DESCRIPTION get set port 80 1025 6 6 HTTP port 65535 alternateport 1025 65535 6 6 Alternative HTTP port authmode basic 1 6 HTTP authentication mode digest sO_accessname string 32 1 6 Http server push access name for stream 1 s1_accessname string 32 1 6 Http server push access name for stream 2 Subgroup of network rtsp NAME VALUE SECURITY D
8. nvideosetting lt positive 0 7 number of video settings per integer gt channel naudiosetting lt positive 0 7 number of audio settings per integer gt channel nuart O 0 7 number of UART interface lt positive integer gt ptzenabled lt boolean gt 0 7 indicate whether to support PTZ control protocol_https lt boolean gt 0 7 indicate whether to support http over SSL protocol_rtsp lt boolean gt 0 7 indicate whether to support rtsp protocol_sip lt boolean gt 0 7 indicate whether to support sip protocol_maxconnection lt positive 0 7 The maximum allowed integer gt simultaneous connections protocol _rtp_multicast_ lt boolean gt 0 7 indicate whether to support scalable scalable multicast protocol _rtp_multicast_ lt boolean gt 0 7 indicate whether to support backchannel backchannel multicast protocol_rtp_tcp lt boolean gt 0 7 indicate whether to support rtp over tcp protocol_rtp_http lt boolean gt 0 7 indicate whether to support rtp over http protocol_spush_mjpeg lt boolean gt 0 7 indicate whether to support server push motion jpeg protocol_snmp lt boolean gt 0 7 indicate whether to support snmp videoin_type 0 1 2 0 7 0 gt Interlaced CCD 1 gt Progressive CCD 2 gt CMOS videoin_resolution lt a list of the 0 7 available resolutions list available resolution separates by comma videoin_codec lt a list of the 0 7 available codec list available
9. slower connection The delay will also increase with added number of users Somewhere Between Real time and Clear Images If you have a broadband network set Fixed quality at Good or better rather than setting Constant bit rate You can also fix the bandwidth according to your actual network speed and adjust the frame rate Start from 30 fps down for best results but not below 15 fps If the image qualities are not improved select a lower bandwidth setting Opening accounts for new use System User Management B Advanced Maintenance Version 0100 FCS 5030 IP Network Camera w IR fr User Management Root Password Root Password Save Add User User name User password User type Manage User User name User passwerd User type Confirm root password Note Leaving the root password field empty means the camera will not be protected by pass eeeseseesososs Administrator gt Operator 5 Viewer 5 Administrator 5 Operator Viewer Protect Network Camera by passwords The Network Camera is shipped without any password by default That means everyone can access the Network Camera including the configuration as long as the IP address is known It is necessary to assign a password if the Network Camera is intended not to be accessed by others Type a new word twice in to enable protection This password is used to identify the administrator Then add an
10. Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and condi tions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS
11. Lumpur Singapore Taipei v i Audio Keep current date and time i System Sync with computer tme User Management Computer date Didaci e Computer tme gt Manual ee Dateilyyyy mm dd 2008 03 10 Version 0100 Time nh mm ss 13 13 28 Automatic NIP server E Updating interval Onehour Save Host name The text displays the title at the top of the main page Time zone Adjust the time with that of the time servers for local settings Keep current date and time Click on this to reserve the current date and time of the Network Camera An internal real time clock maintains the date and time even when the power of the system is turned off Sync with computer time Synchronize the date and time of the Network Camera with the local computer The read only date and time of the PC is displayed as updated Manual Adjust the date and time according to what is entered by the Administrator Notice the format in the related fields while doing the entry Network Camera starts up It will fail if the assigned time server cannot be reached Automatic NTP server Assign the IP address or domain name of the time server Leaving the text box blank connects the Network Camera to the default time servers Update interval Select hourly daily weekly or monthly update with the time on the NTP server User Management FCS 5030 IP Network Camera w IR re gt User Management Live View Local Settings Root Pa
12. To audio input 4 Ti bh To speaker input fo sensor amp alarm Reset Button Power Activity Red LED Green LED a Waterproof Process To completely avoid the camera from water sock apply waterproof process if necessary Utilize silicone clay or similar waterproof material applied to the screws screw holes and other necessary portions Tape the junction points of the connecters on the cable a D so i i S77 Mes Software installation At the end of the hardware installation users can use Installation Wizard program included in the product CDROM to find the location of the Network Camera There may be many Network Cameras in the local network Users can differentiate the Network Cameras with the MAC address The MAC address is printed on the label which is on the bottom of the Network Camera body Please refer to the Quick installation guide of Installation Wizard for details Once installation is complete the Administrator should proceed to the next section Initial Access to the Network Camera for necessary checks and configurations How to Use Installation Wizard Installation The following are steps for the software installation STEP 1 Put the Installation disk into the CD ROM drive and the installation should start automatically If the installation does not start click on Start on the lower left corner of your screen open My Computer and double click on the CD R
13. Wizard Setup Installation Options JE Check the components you want to install and uncheck the components joy you don t want to install Click Next to continue Select components to install Space required 6 1MB Select components to install for the Installation Wizard STEP 3 Select the installation directory for this application software and click on Install button You can also change the installation directory by clicking on Browse button After the proper directory chose please click on the Install button to continue ie Installation Wizard Setup Installation Folder Setup will install Installation Wizard in the following Folder To install in a different folder click Browse and select another folder Click Install to start the installation Destination Folder KC Program Files LevelOne Installation Wizard Browse Space required 6 1MB Space available 11 9GB Destination Location for Installation STEP 4 After clicking Install button the install system will install the Installation Wizard to your computer and a progress bar will display on the dialog After completed the installation please click on the Close button ie Installation Wizard Setup Completed 5 Completed Completed Using Installation Wizard User Interface Once you run the Installation Wizard after a short searching time you will see the user interface as below Manual Setup bu
14. account with user name password and authentication for your friends in You can edit or delete users from 8 Build a security application The Administrator can use the built in motion detection to monitor any movement to perform many useful security applications To upload the snapshots users can choose either email FTP HTTP or Network storage according to user s needs All servers setting are in Server section on Application page Refer to the definition section for detail configuration Be Or aN 9 Click on Configuration on homepage Click on Motion detection at the left column Check Enable motion detection Click on new to have a new window to monitor video Type in a name to identify the new window Use the mouse to click hold and drag the window corner to resize or the title bar to move Fine tune using the Sensitivity and Percentage fields to best suit the camera s environment Higher Sensitivity detects the slighter motion Higher Percentage discriminates smaller objects Clicking on Save enables the activity display Green means the motion in the window is under the watermark set by Administrator and red means it is over the watermark Click on Application at the left column 10 Add a server in server section 11 Add a media with snapshot type in media section And Set the number of pre event and post event images to be uploaded 12 Add a eve
15. be damaged 1 Choose the location on the wall to place the camera Use the bracket as a guide and drill four holes into the wall Hammer the supplied plastic anchors into the holes 2 Place the Network Camera on the bracket and use two screws to secure it to the bracket 3 The user needs the four screws which are included in the product package and a screwdriver Mount the bracket on the wall and position the four screw slots over the plastic anchors Insert the screws into the holes and use the screwdriver to tighten the screws clockwise until they are secure 4 Adjust the angle of the bracket so that the camera is facing the desired surveillance area To install in Ethernet Make sure the Ethernet is firmly connected to a switch hub After attaching the Ethernet cable plug in the power adapter If the LED turns out to blink orange color go to next paragraph Software installation This Network Camera provides a general I O terminal block with one digital input and one digital output device control The pin definition is as below A Consult with the dealer of the peripherals for correct installation 43934 1 SW_NOPEN OUTPUT Max 400mA 12VDC 5 2 SW_COMMON OUTPUT open from SW_OPEN at initial state close with SW_OPEN when set DO to ON 3 Di INPUT Max 50mA 12VDC 4 DI INPUT Initial state of DI is low Make connections Power DC12V A_I To power adapter a a To network HEIT video in See Ss I_D
16. between m and n domain name lt n gt A string limited to contain a domain name shorter than n characters eg www ibm com email address lt n gt A string limited to contain a email address shorter than n characters eg joe www ibm com ip address A string limited to contain an ip address eg 192 168 1 1 mac address A string limited to contain mac address without hyphen or colon connected boolean A boolean value 1 or O represents Yes or No True or False Enable or Disable lt value1 gt Enumeration Only given values are valid lt value2 gt lt value3 gt blank A blank string everything inside lt gt As description NOTE The camera should prevent to restart when parameter changed Group system NAME VALUE SECURITY DESCRIPTION get set hostname string 40 1 6 host name of server ledoff lt boolean gt 6 6 turn on 0 or turn off 1 all led indicators lowlight lt boolean gt 6 6 0 Turn on white light LED in all condition 1 Only turn on white light LED in low light condition date lt yyyy mm dd gt 6 6 Current date of system Set to keep keep keeping date unchanged auto Set to auto to use NTP to synchronize date time lt hh mm ss gt 6 6 Current time of system Set to keep keep keeping time unchanged auto Set to auto to use NTP to synchronize time ntp lt domain name
17. check the MAC and model name in the Mn Restore product label of your device first EM Default Then you can start to link to your device and ji show the main screen by double clicking the About item in the above selection list Iw If you are not able to find your device in the above selection list please make sure all cables are properly connected to your device and then click on the Refresh Devices button You can find the product label in the rear bottom part of your device Click on the Firmware Upgrade Device Information After connected to the selected device s it would display as below If you select more than one device then the device information will show all the selected devices You can switch to the server info by click on the tab control Firmware Upgrade Selected medek ECS 021 Setected deve nioemation Seected froewere nfematon Firmware versieec unipectiad Please soloct a Geiiwase t tipyt ede De selectail devices L Device information Selected medek FCS 071 Selected devices formation ETE rasa 7 44 372 46 728 172 16 E 172 6 7 29 MAC address 00 1148 60 28 00 Famwate version 01000 Selected firmware rftemator Firmware versiee uncpectiad Please solect a Gerace to tipytede the sebectail devices tet poate Multiple devices information Firmware Information The selected firmware information will show the information about the file that
18. event recording The interval of pre event recording in seconds There are two limitations for video clip file Maximum duration The maximal recording file duration in seconds Maximum file size The maximal file size would be generated File name prefix The prefix name will be added on the file name of the video clip Recording The Network camera supports recording on network storage The operation of editing recording item is the same as the one in application page User can know the recording name status weekly and time schedule stream source and destination of recording There can be at most two recording entries To do recording on network storage please add network storage server in application page first FCS 5030 IP Network Camera w IR PE Recording Live View Local Settings j Recording Settings System Configuration Name Status Sun Mon Tue Wed Thu Fri Sat Time Source Destination Add Delete Network ada De Video System User Management E Advanced i Network IP Filtering Motion detection Event Setup i Recording peripherals Leia tag Maintenance Nh Version 91090 Recordieg nama Enable thes recorctng Priory Normal Soue Streami Recordmg Srhetow T Sun Mon F Tue M Wed mau M Fn Y Sat Time Always From to Mh mm Destination Server Settings ad Max recording Capacity Old file wil be overwritten after rescteng macenum recora
19. it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the soft ware or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by
20. level siiin a E A cose rE 94 Get server parameter values ssu sssssssrrrrsnrrnrnnnnnnnnnnnnnnnnsnnnnnnnnnnnnnnnnnn 94 Set server parameter values ssu ssssssssrrrssrrrrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 96 Available parameters on the server sssssssssssrrnnsrnrnnrrnnnnnnnnnnnnnnnnrrrnssnn 97 Drive the digital o tp t s sssrin aa Ee n ALEE E EED eia 117 Query status of the digital input sssssssssssrnrrrnnsnurrrnrrnnrununnnnrnnrnrennuns 118 Query status of the digital output s sssessssssnsrrrrrnrnrnrnrrnnnrnnnnnnnnrsnnne 119 Capture single snapshot sssssssssssrssussrrrrnsrnrrnnnnrrnnnnnrnnnnnnnnnnuunnnrnnnni 120 Account management err eiri e can e e a a e ai 120 System OOS sca vicetstacuesapuitos tea chinn th wedvedea atin oben ees teeseinet aeveaee mies 121 Upgrade firMWware isis ccterececaivassveedeaneneanv ae ar dena Aana DAVANE ENNEN ne denen 122 IP TRC TING es reen sa E a EEA aad hordes teeta aaaedioa in 122 RISP SDP ee aE E ETEO A bee E EEEE 123 D Specifications niii e E r a O a 125 Package Content FCS 5030 Power Adapter Camera Stand CD Manual Utility Quick Installation Guide Oe ee I a Installation In this manual User refers to whoever has access to the Network Camera and Administrator refers to the person who can configure the Network Camera and grant user access to the camera Hardware installation WARNING Do not mount the camera on a soft material The camera may fall and
21. the selection list the Manual Setup button will be enabled Click on it to modify the settings of the selected device After clicked on the Manual Setup button Installation Wizard would try to connect to the selected device The default Administrator s password is blank and the Network Camera initially will not ask for any password If the authentication is failed there would be a pop up dialog window to ask for correct password If you failed three times the Installation Wizard would show you a warning dialog window and abort the connecting to the selected device Connecting to the device 00 11 6B 80 8B X Please enter the administrator password User name 00 l f Password 1 Li _ Authentication Dialog Window Authentication error You have entered wrong password three times Abort the connection to the device If you forget your root password you could reset the device to factory default setting Authentication error System Setting After connected to the selected device the Installation Wizard will switch to system setting page as below Seiten BOD Hostname FCS 3021 Pot IP Dome Camera Tw ets ate User narra Paasword Contin password Data Time win Oste 2007 0515 Time 150847 Qin ss keep arront date and tine Syechroome with comprar time O Sat che and tine mamai Syechronie to retwork tine server automaticaly Fer secentty considerasen you Ca
22. 0Kbps or set Fixed quality at the highest quality The maximum frame rate is 30 If your network bandwidth is more than 512Kbps you can adjust the bit rate according to your bandwidth and set the maximum frame rate to 30 fps If the images vary dramatically in your environment you may want to slow the maximum frame rate down to 20 fps in order to lower the rate of data transmission This allows for better video quality and the human eyes cannot readily detect the differences between those of 20 25 or 30 frames per second If your network bandwidth is below 512 Kbps set the Constant bit rate according to your bandwidth and try to get the best performance by fine tuning with the Maximum frame rate In a slow network greater frame rate results in blur images Video quality performance will vary somewhat due to the number of users viewing on the network even when the parameters have initially been finely tuned Performance will also suffer due to poor connectivity because of the network s burst constraint Only Quality Images Will Do To have the best video quality you should set Fixed quality at Detailed or Excellent and adjust the Maximum frame rate to match your network s bandwidth If your network is slow and you receive broken pictures go to the TCP or HTTP protocol in MPEG 4 Protocol Options and choose a more appropriate mode of transmission The images may suffer a time delay due to a
23. 4 41 NET Subnet Mask 255 255 255 0 System log ar 6 14 34 41 NET Gateway 192 168 10 1 Maintenance ar 6 14 34 41 NET Primary DNS 168 95 1 1 Version 9102c jar 6 14 34 41 NET Secondary DNS 192 168 10 4 ar 6 14 34 42 SYS Recording entry O stop ar 6 14 34 42 SYS Recording entry 1 stop ar 6 14 34 42 EVENT MGR reload config file ar 6 14 34 50 SYS Sync with NTP server failed ar 6 14 34 48 SYS Sync with NTP server lt 2008 03 06 14 34 48 gt ar 6 15 34 07 SYS Sync with NTP server failed ar 6 15 34 08 SYS Sync with NTP server lt 2008 03 06 15 34 08 gt ar 16 03 24 RTSP SERVER Start one session IP 197 158 10 140 jar 6 16 29 12 RESP SERVER Start one session IP 192 168 10 106 ar 6 16 34 09 SYS Sync with NTP server failed Maintenance Five actions can be selected Reboot system Click the reboot button to restart system Restore Click it to restore all setting to factory default except setting in Network type in network page Factory default Click on Factory default button on the configuration page to restore the factory default settings Any changes made so far will be lost and the system will be reset to the initial factory settings The system will restart and require the installer program to set up the network again Upgrade firmware Select the firmware file and click upgrade button FCS 5030 IP Network Camera w IR Maintenance Reboot System Configurat
24. 60 90 120 s lt 0 m 1 gt _resolution 176x144 4 4 Video resolution in pixel 320x240 640x480 800x600 1280x1024 s lt 0 m 1 gt _ratecontr cbr vbr 4 4 cbr constant bitrate olmode vbr fix quality s lt 0 m 1 gt _quant 1 2 3 4 5 4 4 quality of video when choosing vbr in ratecontrolmode 1 is worst quality and 5 is the best quality s lt 0 m 1 gt _bitrate 20000 4 4 set bit rate in bps when choose cbr 30000 in ratecontrolmode 40000 50000 64000 128000 256000 384000 512000 768000 1000000 1200000 1500000 2000000 3000000 4000000 s lt 0 m 1 gt _maxfram 1 2 3 5 10 4 4 set maximum frame rate in fps e 15 20 25 30 only for NTSC or 60Hz CMOS s lt 0 m 1 gt _forcei 1 7 6 Force frame Group audioin_c lt 0 n 1 gt for n channel products NAME VALUE SECURITY get set DESCRIPTION mute 0 1 4 4 Enable audio mute gain 0 31 4 4 Gain of input boostmic 0 1 4 4 Enable microphone boost s lt 0 m 1 gt _codectype aac4 gamr 4 4 set audio codec type for input s lt 0 m 1 gt _aac4_bitrate 16000 32000 48000 64000 96000 128000 4 4 set AAC4 bitrate in bps s lt 0 m 1 gt _gamr_bitrate 4750 5150 5900 6700 7400 7950 10200 12200 4 4 set AMR bitrate in bps Group image_c lt 0 n 1 gt for n channel products N
25. AME VALUE SECURITY DESCRIPTION get set brightness 5 5 4 4 Adjust brightness of image according to mode settings saturation 5 5 4 4 Adjust saturation of image according to mode settings contrast 5 5 4 4 Adjust contrast of image according to mode settings hue 5 5 4 4 Adjust hue of image according to mode settings Group motion_c lt 0 n 1 gt for n channel product NAME VALUE SECURITY DESCRIPTION get set enable lt boolean gt 4 4 enable motion detection win_i lt O0 2 gt _enable lt boolean gt 4 4 enable motion window 1 3 win_i lt O 2 gt _name string 14 4 4 name of motion window 1 3 win_i lt O 2 gt _left 0 320 4 4 Left coordinate of window position win_i lt O 2 gt _top 0 240 4 4 Top coordinate of window position win_i lt O 2 gt _width 0 320 4 4 Width of motion detection window win_i lt 0 2 gt _height 0 240 4 4 Height of motion detection window win_i lt O0 2 gt _objsize 0 100 4 4 Percent of motion detection window win_i lt O 2 gt _ sensitivity 0 100 4 4 Sensitivity of motion detection window Group ddns NAME VALUE SECURITY DESCRIPTION get set enable lt boolean gt 6 6 Enable or disable the dynamic dns provider Safe100 6 6 Safe100 gt safe100 net DyndnsDynamic DyndnsDynamic gt dyndns org DyndnsCustom dynamic TZO DyndnsCustom gt dyndns org DHS custom Dyninterfree TZO gt tzo c
26. ED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES This product incorporates open source code into the software and therefore falls under the guidelines governed by the General Public License GPL agreement Adhering to the GPL requirements the open source code and open source license for the source code are available for free download at http global level1 com If you would like a copy of the GPL or other open source code in this software on a physical CD medium LevelOne Digital Data Communications offers to mail this CD to you upon request for a price of US 9 99 plus the cost
27. ESCRIPTION get set port 554 1025 6 6 RTSP port 65535 authmode disable 1 6 RTSP authentication mode basic digest sOQ_accessname string 32 1 6 RTSP access name for stream 1 s1_accessname string 32 1 6 RTSP access name for stream2 Subgroup of rtsp_s lt 0 n 1 gt multicast n is stream count NAME VALUE SECURITY DESCRIPTION get set alwaysmulticast lt boolean gt 4 4 Enable always multicast ipaddress lt ip address gt 4 4 Multicast IP address videoport 1025 65535 4 4 Multicast video port audioport 1025 65535 4 4 Multicast audio port ttl 1 255 4 4 Multlicast time to live value Subgroup of network rtp NAME VALUE SECURITY DESCRIPTION get set videoport 1025 65535 6 6 video channel port for RTP audioport 1025 65535 6 6 audio channel port for RTP Subgroup of network pppoe NAME VALUE SECURITY DESCRIPTION get set user string 128 6 6 PPPoE account user name pass password 64 6 6 PPPoE account password Group ipfilter NAME VALUE SECURITY DESCRIPTION get set allow_i lt O 9 gt _ start 1 0 0 0 6 6 Allowed starting IP address for 255 255 255 25 RTSP connection 5 allow_i lt 0 9 gt _end 1 0 0 0 6 6 Allowed ending IP address for 255 255 255 25 RTSP connection 5 deny_i lt 0 9 gt _start 1 0 0 0 6 6 Denied starting IP address for 255 255 255 25 RTSP c
28. L PAT 819303 SE PAT 819303 US PAT 5664053 THELIST MAY BE UPDATED FROM TIME TO TIME BY LICENSORS AND A CURRENT VERSION OF WHICH IS AVAILABLE ON LICENSOR S WEBSITE AT HTTP WWW VOICEAGE COM Electromagnetic Compatibility EMC This device compiles with FCC Rules Part 15 Operation is subject to the following two conditions This device may not cause harmful interference and This device must accept any interference received including interference that may cause undesired operation USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a partial installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the seperation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that t
29. OM gt Installation_Wizard exe The Installation Wizard Installation Window will appear ie Installation Wizard Setup License Agreement Please review the license agreement before installing Installation Wizard IF you accept all terms of the agreement click I Agree End User License Agreement IMPORTANT READ CAREFULLY This End User License Agweerrent the Azveerrent is a legal ageement between you either an individual of an entity and Digital Data Communications Asia Co Lid C Dizital Dats Communications Asis ganding the use of the Digital Data Communications Asia s softwaxe entitled Installation Wizand version 2 0 which may include usex documentation puovided in online ox electuonic form the Softwaxe By clicking the button rreuked I AGREE or YES below you agree to be bound by the tene of this Agreement If you do not aguee to the terme of this Agreement please do 4 Installation Wizard Installation Window STEP 2 Please read the license agreement first and then click on I Agree to continue the installation process The install process will go on and then the below window will appear This page is for you to select the additional component you want to install The component Create shortcut on desktop will create a shortcut on the desktop It is more convenient for you to launch Install Wizard 2 After selecting the components please click on the Next Button to continue i Installation
30. TFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER FOR i ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR ii DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA LLC SEE HTTP WWW MPEGLA COM AMR NB Standard THIS PRODUCT IS LICENSED UNDER THE AMR NB STANDARD PATENT LICENSE AGREEMENT WITH RESPECT TO THE USE OF THIS PRODUCT THE FOLLOWING LICENSORS PATENTS MAY APPLY TELEFONAKIEBOLAGET ERICSSON AB US PAT 6192335 6275798 6029125 6424938 6058359 NOKIA CORPORATION US PAT 5946651 6199035 VOICEAGE CORPORATION AT PAT 0516621 BE PAT 0516621 CA PAT 2010830 CH PAT 0516621 DE PAT 0516621 DK PAT 0516621 ES PAT 0516621 FR PAT 0516621 GB PAT 0516621 GR PAT 0516621 IT PAT 0516621 LI PAT 0516621 LU PAT 0516621 NL PAT 0516621 SE PAT 0516621 US PAT 5444816 AT PAT 819303 AT E 198805T1 AU PAT 697256 BE PAT 819303 BR PAT 9604838 7 CA PAT 2216315 CH PAT 819303 CN PAT ZL96193827 7 DE PAT 819303 DE69611607T2 DK PAT 819303 ES PAT 819303 EP PAT 819303 FR PAT 819303 GB PAT 819303 IT PAT 819303 JP PAT APP 8 529817 N
31. ach category in the left column will be explained in the following pages The bold texts are the specific phrases on the Option pages The Administrator may type the URL below the figure to directly enter the frame page of configuration If the Administrator also wants to set certain options through the URL read the reference appendix for details Basic Network Any changes made on the Network type section will restart the system in order to validate the changes Make sure every field is entered correctly before clicking onle FCS 5030 IP Network Camera w IR Live View Local Settings Network Type System Configuration Basic LAN Network Get IP address automatically ivideo Use fixed IP address iAudio IP address 192 168 10 248 System Subnet mask 255 255 255 0 User Management DAE TRET 192 166 10 1 Pomary ONS 168 95 1 1 Boyes Secondary DNS 192 168 10 4 Maintenance Primary WINS server i Secondary WINS server Version 0100c F Enable UPnP bat i nabile nP presentation L Enable UPnP port forwarding PPPoE User name Password Confirm password Save Network type LAN amp PPPoE The default type is LAN Select PPPoE if using ADSL Get IP address automatically amp Use fixed IP address The default status is Get IP address automatically This can be tedious having to perform software installation whenever the Network Camera starts Therefore once the network settings
32. am normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition m
33. at the same time The TCP protocol allows for less packet loss and produces a more accurate video display The downside with this protocol is that the real time effect is worse than that with the UDP protocol The HTTP protocol allows the same quality as TCP protocol and the user don t need to open specific port to streaming under some network environment If no special need is required UDP unicast protocol is recommended Generally speaking the client s choice will be in the order of UDP multicast UDP unicast TCP HTTP After the Network Camera is connected successfully Protocol Option will indicate the selected protocol The selected protocol will be recorded in the user s PC and will be used for the next connection If the network environment is changed or the user wants to let the web browser to detect again manually select the UDP protocol save and return HOME to re connect 4 The fourth one is MP4 Save Options User can specify the recording folder file name prefix and suffix here There is only one setting Stream Options for the client setting side in Firefox User can choose to view stream1 and stream2 lt url gt http lt Network Camera gt clientset html lt Network Camera gt is the domain name or the original IP address of the Network Camera Digital output Click on ON the digital output of the Network Camera will be triggered Or clicking on OFF can let the digita
34. ata Communications Asia Co Ltd to make that assertion CO Always trust content from Digital Data Communications Asia Co Ltd Primary user s capability Main Screen with Camera View The main page layout has two parts Configuration functions The camera can be configured using these user interfaces Camera View What the camera sees Click on the configuration link to the left of the image window to enter the configuration page Here is the layout in IE when it is MPEG 4 streaming S seeueve Do The function in JPEG will be a little different when it is JPEG streaming Only digital zoom and record button are supported FCS 5030 IF Network Gamera wi IR Trareterring data freer 192 168 10 108 _ Here is the layout in Firefox when it is JPEG streaming FS ets 2 S File Ede View Hitery Boctonarte Teck Hdp BB BIG pne heni iSl iig Gening stres EJ Latest Hesdtoes i FCS 5030 IP Network Camera w IR Traraterng tate free 192 168 10 405 Digital Zoom Click on the magnifier icon under the camera view then the digital zoom control panel will be shown Uncheck Disable digital zoom and use the slider control to change the zoom factors ba Disable digital zoom MP4 Recording Click on the red circle button Y on the plugin to start MP4 recording You can set the related options in client setting page Snapshot Click on Snapshot web browser will pop up a new windo
35. ce synchronized with your computer time 2 Set date and time manually Set the date and time manually by entering new values Notice the format in the related field while typing 3 Synchronize to network time server automatically Make device automatically synchronize with timeservers over the Internet every hour If you want to keep the current date and time please choose Keep current date and time Network Setting The Installation Wizard can help you to setup the network connection with LAN or PPPoE After you clicked on the Next button on the System page the Installation Wizard would lead you to the PPPoE setting page If you want to connect your server to Internet via PPPoE please click on Yes to start the PPPoE setting process or click on No to invoke the LAN setting Network Type 2 Do you want to setup PPPoE for the device Internet Account Settings aR a eras corer teat iy Shep iss Seno A PFPE inane PPPCE pasaveard Plans eidi tet wanine ind pisa preide by youi ESP Saianial Samica Pisike te Connac ta btariiol hy PPPoE Network setting for PPPoE If you click on Yes in the Network Type dialog window you will be led to the PPPoE setting page In this page you can input the PPPoE username and PPPoE password provided by your ISP and then the server will be set to PPPoE mode rather than LAN mode when the setup is completed If you don t know the accoun
36. cibsdu daw EE and pe nadu nae A E ane 54 TWO WAY AUICIO ssaaweiiaseceaeii4 dan diandeande te EAEE nina desis Aetna tias aah 56 EP wastachncaniiand sseecanduussanatosteucatisanenedsricesiwan E tatuasn lined maataeuwan 56 RTSP Streaming iss cerroensis cir aa saaee inns EEEE edaee eis 56 IP FIREN oiean naar ae a ta E ATENE EA EE 58 Motion detection wicenicaddrceecvicsieilendd e dawtied laid eewsadtildeddsteteecauitdeulegede oe era s 59 Event Set P es a ri A a AAA a a A TAAA I AAAA aa E 60 Event srie ste navy ee Anan ANA AAAA AEE ANNO NEEE a 61 eR EEE T E E E E tees oaltaley seaieebeeda oneaalevae 62 Media Setting siron e e SEVERA NEARE EDER AAEE AEA E 64 RECOrdING igon e E A agenda O N AE cede TEON 66 Peripherals psr aaa A aAA a aa a Na aa aain 68 SV SUS UM lOG ean aid as nes ata at bon od EEEE TTO EE T EEUE OEE AE TEAD iuue E ala 69 Maintenance sienn e a e A a a a a foaklerea s 70 Appendini aa a AA E E a A NE A A AVE EESE aa 7i A TrOUDIESNOOUING siieaiv ac cenend cormnnavaddeneneansp wenn dnenay dontan iaa ECUN WN aaea aAa 71 Reset ANd restoren sniene cece tenner e nnn n AES AAE eee eens 71 B URL commands of the Network Camera ccccee cece ee ee eens teen eeeeee ee neaeeeeee 93 OW ETVICWiinctiinciiner savascelnansannladswenten EEEE ETE OEE 93 Style CONVENUON sesiceietar sade deevande eat tri seed dwar dees dea vavau Saron we niNe ia de annia 93 General CGI URL syntax and parameters ccccteeeee eee eee eee ee neeenneeee eee 94 Security
37. cking on the Refresh Devices button will refresh the device list and search all devices on the LAN again Refreshing the device list will take several seconds If you want to link to your device double clicking it on your device list will lead you to the browser for operating your device Function buttons Installation Wizard Device Selection MAC IP Address Model 00 11 6B 80 8B 0C 192 168 50 156 FCS 3021 Model No FCS 3021 A Then you can start to link to your device and n r i show the main screen by double clicking the item in the above selection list Please check the MAC and model name in the product label of your device first If you are not able to find your device in the above selection list please make sure all cables are properly connected to your device and then click on the Refresh Devices button You can find the product label in the rear bottom part of your device Function buttons Manual Setup Click on this button to modify the setting of the selected devices For more detail please refer to 0 Manual Setup Firmware Upgrade Click on this button to upgrade the firmware of the selected devices For more detail please refer to 0 Upgrade Restore Default Click on this button to restore the selected device to factory default About a Click on this button to get version information of the Installation Wizard Manual Setup When you select one device in
38. codec types separaters by comma videoout_codec lt a list of the 0 7 available codec list available codec types separaters by comma audio_aec lt boolean gt 0 7 indicate whether to support acoustic echo cancellation audio_extmic lt boolean gt 0 7 indicate whether to support external microphone input audio_linein lt boolean gt 0 7 indicate whether to support external line input audio_lineout lt boolean gt 0 7 indicate whether to support line output audio_headphoneout lt boolean gt 0 7 indicate whether to support headphone output audioin_codec lt a list of the 0 7 available codec list available codec types separaters by comma audioout_codec lt a list of the 0 7 available codec list available codec types separaters by comma camctrl_httptunnel lt boolean gt 0 7 Indicate whether to support the http tunnel for camera control uart_httptunnel lt boolean gt 0 7 Indicate whether to support the http tunnel for uart transfer transmission_mode TX 0 7 Indicate what kind of transmission Rx mode the machine used TX Both server Rx receiver box Both DVR network_wire lt boolean gt 0 7 Indicate whether to support the Ethernet network_wireless lt boolean gt 0 7 Indicate whether to support the wireless wireless 802dot11b lt boolean gt 0 7 Indicate whether to support the wireless 802 11b wireless _802dot11g lt boolean gt 0 7 Indicate whet
39. connected firmwareversion string 40 0 7 The version of firmware including model company and version number in the format lt MODEL BRAND VERSION gt language_default string 16 0 7 Default webpage language language_count lt integer gt 0 7 number of webpage language available on the server language_i lt 0 count string 16 0 7 Available language lists 1 gt Group status NAME VALUE SECURITY DESCRIPTION get set di_i lt O ndi 1 gt lt boolean gt 1 7 0 gt Inactive normal 1 gt Active triggered do_i lt 0 ndi 1 gt lt boolean gt 1 1 0 gt Inactive normal 1 gt Active triggered onlinenum_rtsp integer 6 7 current RTSP connection numbers onlinenum_httppush integer 6 7 current HTTP push server connection numbers Group di_i lt 0 ndi 1 gt NAME VALUE SECURITY DESCRIPTION get set normalstate high 1 1 indicate whether open circuit or low closed circuit represents inactive status Group do_i lt 0 ndo 1 gt NAME VALUE SECURITY DESCRIPTION get set normalstate open 1 1 indicate whether open circuit or grounded closed circuit represents inactive status Group security NAME VALUE SECURITY DESCRIPTION get set user_i0 name string 64 6 7 User s name of root user_i lt 1 20 gt _name string 64 6 7 User s name user_i0_pass string 64 6 6 Root s password user_i lt 1 20 gt _pass string 64
40. dex position start end parameters have higher priority then the index parameter deletedeny Remove a set of deny IP address range from server If start and end parameters are specified it will try to remove the matched IP address If index is specified it will try to remove the address from given index position start end parameters have higher priority then the index parameter start lt ip address gt The start IP address to add or to delete end lt ip address gt The end IP address to add or to delete index lt value gt The start position to add or to delete return lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according the the current path If you omit this parameter it will redirect to an empty page RTSP SDP Note This request requires viewer access privilege Method GET POST Syntax http lt servername gt viewer lt 0O n 1 gt lt network_accessname_ lt 0 m 1 gt gt rtsp lt servername gt lt 0 n 1 gt lt network_accessname_ lt 0 m 1 gt gt n is the channel number and m is the stream number You can get the SDP by HTTP or just describe by RTSP protocol directly For detailed streaming protocol please refer to control signaling and data format documents D Specifications
41. dify them Recommend that using different media in different event to make use all media be produced and received correctly If using the same media in different events and the events trigger almost simultaneously the servers in the second triggered event will not receive any media there would be only notifications FCS 5030 IP Network Camera w IR Live View Local Settings Event Settings Systers Conligeration Name Status Sun Mon Tue Wed Thu Fri Sat Time Trigger vasic ca a Network 1 Server Settings Video Name Type Address Location Audio aaa sees System Add Delete User Management Media Settings advanced Name Type Network Add Delete IP Filtering Motion detection Event Setup Recording a Peripherals System log Maintenance Verson 01900c Event Event Settings Event name E Enable this event Priority Normal Detect next event after 10 second s Trigger J Video motion detection Detect motion in window Note Please configure Motion detection first 5 Periodically Trigger every other 1 minutes D Digital input System boot Event Schedule W Sun V Mon V Tue Wed F Thu X Fri V Sat Time Always gt From 00 00 to 24 00 hh mm Action E D O Trigger digital output for 1 seconds Event name The unique name for event Enable this event Check it to enable this event Priority The event with higher priority will be e
42. du 240 GMT 06 00 Almaty Novosibirsk Astana Dhaka Sri Jayawardenepura 260 GMT 06 30 Rangoon 280 GMT 07 00 Bangkok Hanoi Jakarta Krasnoyarsk 320 GMT 08 00 Beijing Chongging Hong Kong Kuala Lumpur Singapore Taipei 360 GMT 09 00 Osaka Sapporo Tokyo Seoul Yakutsk 380 GMT 09 30 Adelaide Darwin 400 GMT 10 00 Brisbane Canberra Melbourne Sydney Guam Vladivostok 440 GMT 11 00 Magadan Solomon Is New Caledonia 480 GMT 12 00 Aucklan Wellington Fiji Kamchatka Marshall Is 520 GMT 13 00 Nuku Alofa updateinterval 0 6 6 O to Disable automatic time 3600 adjustment otherwise it means 86400 the seconds between NTP 604800 automatic update interval 2592000 restore 0 7 6 Restore the system parameters to lt positive integer gt default value Restart the server after lt value gt seconds reset O 7 6 Restart the server after lt value gt lt positive integer gt seconds restoreexceptnet 0 7 6 Restore the system parameters to lt positive integer gt default value except ipaddress subnet router dnsi dns2 ddns settings Restart the server after lt value gt seconds SubGroup of system info The fields in this group are unchangeable NAME VALUE SECURITY DESCRIPTION get set modelname string 40 0 7 model name of server serialnumber lt mac address gt 0 7 12 characters mac address without hyphen
43. e for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not acc
44. e gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according the the current path If you omit this parameter it will redirect to an empty page Example Drive the digital output 1 to triggered state and redirect to an empty page http myserver cgi bin dido setdo cgi do1 1 Query status of the digital input Note This request requires the privilege of viewer Method GET POST Syntax http lt servername gt cgi bin dido getdi cgi di0 amp di1 amp di2 amp di3 If no parameter is specified all the status of digital input will be returned Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt ength gt r n r n diO lt state gt r n di1 lt state gt r n di2 lt state gt r n di3 lt state gt r n where lt state gt can be O or 1 Example Query the status of digital input 1 Request http myserver cgi bin dido getdi cgi di1 Query status of the digital output Note This request requires the privilege of viewer Method GET POST Syntax http lt servername gt cgi bin dido getdo cgi do0 amp do 1 amp do2 amp do3 If no parameter is specified all the status of digital output will be returned Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt ength gt r n r n do0 lt state gt r n do1 l
45. e network storage is supported Network storage location The path to upload the media Workgroup The workgroup for network storage User name This granted user name on the network storage Password This granted password on the network storage After input the setting of server user can click on to test whether the setting is correct The testing result will be shown in a pop up window Media Setting PMedia Media name Media type Snapshot Source Stream1 Send a pre event image s 0 7 Send 1 post event image s 0 7 File Name Prefix Snapshot Add date and time suffix to file name Video Clip Source Stream1 Y Pre event recording o seconds 0 9 Maximum duration 5 seconds 1 10 Maximum file size 500 Kbytes 50 800 File Name Prefix System log Media name The unique name for media There are three kinds of media They are snapshot video clip and system log Here is setting for snapshot Source The source of stream stream1 or stream2 Send pre event images The number of pre event images Send post event images The number of post event images File Name Prefix The prefix name will be added on the file name of the snapshot images Add date and time suffix to file name Check it to add timing information as file name suffix Here is setting for video clip Source The source of stream stream1 or stream2 Pre
46. ecessary for logging in the DDNS server or notify the User of the new IP address Note when this field is input as Username the following field must be input as Password Password Key Please input the password or key to get the DDNS service Save Click on this button to save current settings for the DDNS service and UPnP function HTTP Authentication It supports basic and digest modes HTTP port This can be other than the default Port 80 Once the port is changed the users must be notified the change for the connection to be successful For instance when the Administrator changes the HTTP port of the Network Camera whose IP address is 192 168 0 100 from 80 to 8888 the users must type in the web browser http 192 168 0 100 8888 instead of http 192 168 0 100 Secondary HTTP port It support alternate port to access HTTP server Access name for stream 1 This is the access URL of stream 1 for making connection from client software when its codec type is JPEG Access name for stream 2 This is the access URL of stream 2 for making connection from client software when its codec type is JPEG Using http lt ip address gt lt http port gt lt access name gt to make connection Two way audio Two way audio port This can be other than the default port 5060 The user can change this value from 1025 to 65535 After the changed the external Two Way audio client program mus
47. ed with a Carriage Return and Line Feed CRLF printed as r n Return HTTP 1 0 lt HTTP code gt lt HTTP text gt r n URL syntax examples are written with Example in bold face followed by a short description and a light grey box with the example Example request a single snapshot image http mywebserver cgi bin viewer video jpg General CGI URL syntax and parameters CGI parameters are written in lower case and as one word without any underscores or other separators When the CGI request includes internal camera parameters the internal parameters must be written exactly as they are named in the camera or video server The CGls are organized in function related directories under the cgi bin directory The file extension of the CGI is required Syntax http lt servername gt cgi bin lt subdir gt lt subdir gt lt cgi gt lt ext gt lt parameter gt lt value gt amp lt parameter gt lt value gt Example Setting digital output 1 to active http mywebserver cqgi bin dido setdo cgi do1 1 Security level SECURITY SUB DIRECTORY DESCRIPTION LEVEL 0 anonymous Unprotected 1 view anonymous viewer 1 Can view listen talk to camera dido camctrl 2 Can control dido ptz of camera 4 operator anonymous viewer dido camctrl operator Operator s access right can modify most of camera s parameters except some privilege and network
48. ength gt r n r n lt system log information gt r n Upgrade firmware Note This request requires administrator privilege Method POST Syntax http lt servername gt cgi bin admin upgrade cqi Post data fimage lt file name gt amp return lt return page gt r n r n lt multipart encoded form data gt Server will accept the upload file named lt file name gt to be upgraded the firmware and return with lt return page gt if indicated IP filtering Note This request requires administrator access privilege Method GET POST Syntax http lt servername gt cgi bin admin ipfilter cgi method lt value gt 8 amp start lt paddress gt amp end lt ipaddress gt amp index lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION Method addallow Add a set of allow IP address range to server Start and end parameters must be specified If the index parameter is specified it will try to add starting from index position adddeny Add a set of deny IP address range to server Start and end parameters must be specified If the index parameter is specified it will try to add starting from index position deleteallow Remove a set of allow IP address range from server If start and end parameters are specified it will try to remove the matched IP address If index is specified it will try to remove the address from given in
49. ept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and condi tions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distributi
50. er motion detection The following figure shows the screen when is clicked FCS 5030 IP Network Camera w IR GP Motion detection Live view Local Settings T Enable motion detection System Configuration Basic i Network Window Name video Os iAudio Sensitivity i System 0 User Management E Advanced Percentage i Network 0 IP Filtering Motion detection i Event Setup i Recording peripherals 5 System log Maintenance Version 9100c Event Setup There are three sections in application page They are event server and media Click to pop a window to add a new item of event server or media Click to delete the selected item from event server or media Click on the item name to pop a window to edit it There can be at most three events There can be at most five server and five media configurations User can know the event name status weekly and time schedule and trigger type in event section The server name type and address location are shown in server section The current media free space media name and type are shown in media section After adding a new media the value of free space will be updated User cannot add media which size is larger than media free space It is suggested to set server and media first before setting event The servers and medias selected in event list are not modified or deleted Please remove them first from the event if you want to delete or mo
51. ere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party fora charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source cod
52. es are moving rapidly Consequently to ensure detailed video quality quantization rate regardless of the network it will utilize more bandwidth to send the maximal frames when images change drastically In JPEG mode user can set Maximum frame rate and Video quality to adjust the video performance Audio settings Mute Turn off audio Input gain Modify the gain of the internal audio input Audio type Select audio codec AAC or GSM AMR and the bit rate FCS 5030 IP Network Camera w IR Audio Settings System Configuration Basic Li Mute Network Input gain 10 5dB video Audio type Si AAC GSM AMR 1 a feted AAC bit rate 128 Kbps Syekern GSM AMR bit rate 12 2 Kbps User Management AA Advanced usava Maintenance Version 0100c Image Settings 3 hittp 192 168 365 Image Settings Microsoft Internet Explorer gt Iimage Settings Brightness Saturation 0 Contrast 0 Hue 0 EER n E Ee i Image Settings Click on this button to pop up another window to tune Brightness Contrast Hue and Saturation for video compensation Each field has eleven levels ranging from 5 to 5 In Brightness and Contrast fields the value O indicates auto tuning The user may press to fine tune the image When the image is O K press to set the image settings Click on to recall the original setti
53. esolution will be set to 176x144 pixels 2 Audio The audio codec will be set to AAC Mobile Access Setup Do you want to access the device by mobile phone If you click on the Yes button the video resolution of the device will be set to 176x144 Mobile Access Apply to selected device After configuring all the settings the apply page will show up Click on Apply button to apply the changes to the selected device or click on Back button to go back to the previous page and modify the setting again pee 3 gt gt Wirekes ty Sto 4 gt gt Apply Please check the following settings k System Daia Time es Network ve If you would Eke to change the above settings please click on the Back button Click on the Apply button to apply the settings to the device Apply page When you click on the Apply it will start to update your settings to server Upgrade When you select one device or multiple devices of the same model the Firmware Upgrade button will be enabled Click on it to upgrade the firmware of the selected device s After click on the Firmware Upgrade button Installation Wizard will try to connect the selected device s and lead you to the firmware upgrade page Installation Wizard Device Selection IP Address Model 00 11 6B 80 8B 0C 192 168 50 156 FcS 3021 ee Refresh Devices Firmware Upgrade Model No FCS 3021 2 Please
54. especially the IP address have been entered correctly select Use fixed IP address then the Network Camera will skip installation at the next boot The Network Camera can automatically restart and operate normally after a power outage Users can run IP installer to check the IP address assigned to the Network Camera if the IP address is forgotten or using the UPnP function provided by the Network Camera MS Windows XP provides UPnP function at My Network Place IP address This is necessary for network identification Subnet mask This is used to determine if the destination is in the same subnet The default value is 255 255 255 0 Default router This is the gateway used to forward frames to destinations in a different subnet Invalid router setting will fail the transmission to destinations in different subnet Primary DNS The primary domain name server that translates hostnames into IP addresses Secondary DNS Secondary domain name server that backups the Primary DNS Primary WINS server The primary WINS server that maintains the database of computer name and IP address Secondary WINS server The secondary WINS server that maintains the database of computer name and IP address Enable UPnP presentation Enable the UPnP camera short cut Enable UPnP port forwarding Enable UPnP port forwarding PPPoE If using the PPPoE interface fill the following settings from ISP User na
55. ey are email server FTP server HTTP server and network storage Here is setting for email server Sender email address The email address of the sender Recipient email address The email address of the recipient Server address The domain name or IP address of the external email server User name This granted user name on the external email server Password This granted password on the external email server Here is setting for FTP server Server address The domain name or IP address of the external FTP server Server port This can be other than the default port 21 The user can change this value from 1025 to 65535 User name This granted user name on the external FTP server Password This granted password on the external FTP server Remote folder name Granted folder on the external FTP server The string must conform to that of the external FTP server Some FTP servers cannot accept preceding slash symbol before the path without virtual path mapping Refer to the instructions for the external FTP server for details The folder privilege must be open for upload Passive Mode Check it to enable passive mode in transmission Here is setting for HTTP server URL The URL to upload the media User name This granted user name on the external HTTP server Password This granted password on the external HTTP server Here is setting for network storage Only on
56. ge gt PARAMETER VALUE DESCRIPTION method add Add an account to server When using this method username field is necessary It will use default value of other fields if not specified delete Remove an account from server When using this method username field is necessary and others are ignored edit Modify the account password and privilege When using this method username field is necessary and other fields are optional If not specified it will keep original settings username lt name gt The name of user to add delete or edit userpass lt value gt The password of new user to add or that of old user to modify The default value is an empty string privilege lt value gt The privilege of user to add or to modify viewer viewer s privilege operator operator s privilege admin administrator s privilege return lt return page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according the the current path If you omit this parameter it will redirect to an empty page System logs Note This request require administrator privilege Method GET POST Syntax http lt servername gt cgi bin admin syslog cgi Server will return the up to date system log Return HTTP 1 0 200 OK r n Content Type text plain r n Content Length lt syslog l
57. gt 6 6 NTP server lt ip address gt lt blank gt timezoneindex 489 529 6 6 Indicate timezone and area 480 GMT 12 00 Eniwetok Kwajalein 440 GMT 11 00 Midway Island Samoa 400 GMT 10 00 Hawaii 360 GMT 09 00 Alaska 320 GMT 08 00 Las Vegas San_Francisco Vancouver 280 GMT 07 00 Mountain Time Denver 281 GMT 07 00 Arizona 240 GMT 06 00 Central America Central Time Mexico City Saskatchewan 200 GMT 05 00 Eastern Time New York Toronto 201 GMT 05 00 Bogota Lima Quito Indiana 160 GMT 04 00 Atlantic Time Canada Caracas La Paz Santiago 140 GMT 03 30 Newfoundland 120 GMT 03 00 Brasilia Buenos Aires Georgetown Greenland 80 GMT 02 00 Mid Atlantic 40 GMT 01 00 Azores Cape_Verde_IS 0 GMT Casablanca Greenwich Mean Time Dublin Edinburgh Lisbon London 40 GMT 01 00 Amsterdam Berlin Rome Stockholm Vienna Madrid Paris 41 GMT 01 00 Warsaw Budapest Bern 80 GMT 02 00 Athens Helsinki Istanbul Riga 81 GMT 02 00 Cairo 82 GMT 02 00 Lebanon Minsk 83 GMT 02 00 Israel 120 GMT 03 00 Baghdad Kuwait Riyadh Moscow St Petersburg Nairobi 121 GMT 03 00 Iraq 140 GMT 03 30 Tehran 160 GMT 04 00 Abu Dhabi Muscat Baku Tbilisi Yerevan 180 GMT 04 30 Kabul 200 GMT 05 00 Ekaterinburg Islamabad Karachi Tashkent 220 GMT 05 30 Calcutta Chennai Mumbai New Delhi 230 GMT 05 45 Kathman
58. gth of content Example request IP address and it s response Request http 192 168 0 123 cgi bin admin getparam cgi network_ipaddress Response HTTP 1 0 200 OK r n Content Type text html r n Context Length 33 r n r n network ipaddress 192 168 0 123 r n Set server parameter values Note The access right depends on the URL directory Method GET POST Syntax http lt servername gt cgi bin anonymous setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt http lt servername gt cgi bin viewer setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt http lt servername gt cgi bin operator setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt http lt servername gt cgi bin admin setparam cgi lt parameter gt lt value gt amp lt parameter gt lt value gt amp update lt value gt amp return lt return page gt PARAMETER VALUE DESCRIPTION lt group gt _ lt name gt value to assigned Assign lt value gt to the parameter lt group gt _ lt name gt update lt boolean gt set to 1 to actually update all fields no need to use update parameter in each group return lt retu
59. h convenient URLs This section specifies the external HTTP based application programming interface The HTTP based camera interface provides the functionality to request a single image to control camera functions PTZ output relay etc and to get and set internal parameter values The image and CGl requests are handled by the built in Web server Style convention In URL syntax and in descriptions of CGI parameters a text within angle brackets denotes a content that is to be replaced with either a value or a string When replacing the text string also the angle brackets shall be replaced An example of this is the description of the name for the server denoted with lt servername gt in the URL syntax description below that is replaced with the string myserver in the URL syntax example also below URL syntax are written with the Syntax word written in bold face followed by a box with the referred syntax as seen below The name of the server is written as lt servername gt This is intended to be replaced with the name of the actual server This can either be a name e g mywebcam or thecam adomain net or the associated IP number for the server e g 192 168 0 220 Syntax http lt servername gt cgi bin viewer video jpg Description of returned data is written with Return in bold face followed by the returned data in a box All data returned as HTTP formatted i e starting with the string HTTP is line separat
60. her to support the wireless 802 11g wireless_encrypt_wep lt boolean gt 0 7 Indicate whether to support the wireless WEP wireless_encrypt_wpa lt boolean gt 0 7 Indicate whether to support the wireless WPA wireless_encrypt_wpa2_ lt boolean gt 0 7 Indicate whether to support the wireless WPA2 Group event_i lt 0 2 gt PARAMETER VALUE SECURITY DESCRIPTION get set name string 40 6 6 The identification of this entry enable 0 1 6 6 To enable or disable this event priority 0 1 2 6 6 Indicate the priority of this event 0 indicates low priority 1 indicates normal priority 2 indicates high priority delay 1 999 6 6 Delay seconds before detect next event trigger boot 6 6 Indicate the trigger condition di boot indicates system boot motion di indicates digital input seq motion indicates video motion detection seq indicates periodic condition di lt integer gt 6 6 Indicate which di detected This field is required when trigger condition is di One bit represents one digital input The LSB indicates DI 0 mdwin lt integer gt 6 6 Indicate which motion detection windows detected This field is required when trigger condition is md One bit represents one window The LSB indicates the 1 window For example to detect the 1 and 3 windows set mdwin as 5 inter 1 999 6 6 Interval of period snapshot in m
61. inainen san ENET Oaa EE ETERN EAI I EEDE EEO TANOAN 34 MP4 Recording israe iernii ni ani ene iE ED EENE 35 Snapshot sinio an LOA EE ATENEA EA 35 Local SettiNgS iivssivecatave vate do dvee dived enana aa aa Eear ereaecadeuen 36 Digitak tp ts reae tacawisedousss E NeT EEE A 38 Administrator scapability serissrsicesioreiieisuereseus rieordi o eens 39 Fine tuning for Best Performance s sssssssssssusssrnrrrrrrnnnnurrnrrrnrrnurrnnrrene 39 Opening accounts for NEW USC iv ssiciesiecccnwe eens teveeenseaveeveuce vane seeveeeeieenuaeee 41 Build a security application cccceeeeee cece eee eee eee eee enna enee 42 Software revision upgrade sisis err ansni seinan eA eaiies EErEE Eaa 43 Definitions iN Configuration sasssa aaa AAAS A aa iae Eaa a 44 Ba ic NetWOrK viciscisvierstecveveecestvaveeecusbeecrrievees aaa aa ANNAN raa iN aeaiia 44 NGIWONK TY DG wisn svsnambeeda na urusweusasvedanwipa aden nveed EEEE EN A EEO URT 44 AUG ANG Vide waisted cea ecer saa n sear iden aa a a E a 46 VIDEO S CUINGS sateen N AE a ANE AA Media ein AA E AAR veal 46 Audio Settings essersi doveeacnrmrnteaddeven vane swans se ceee denn nates denied eNEAN Aaa rai S 47 IMAGE SCUING Si sirere ys exenenasiecves acai Aaided easiest E E DEAS O 48 PRVvaCy MaSkwcissxauseaacuievniea dan AEEA EE E EAE 50 System ian a a a a a a a a a a 52 User Management wisiacieeciteniiniddaavastanee denne saviessndeuenieedarvasdeasinene een E 53 AdVvanCed NGIWOMk sissors i aurreen wisn
62. inute This field is used when trigger condition is seq weekday lt interger gt 6 6 Indicate which weekday is scheduled One bit represents one weekday The bitO LSB indicates Saturday The bit1 indicates Friday The bit2 indicates Thursday The bit3 indicates Wednesday The bit4 indicates Tuesday The bit5 indicates Monday The bit6 indicates Sunday For example to detect events on Friday and Sunday set weekday as 66 begintime hh mm 6 6 Begin time of weekly schedule endtime hh mm 6 6 End time of weekly schedule 00 00 24 00 means always action_do_i lt 0 ndo 1 gt _enable 6 6 To enable or disable trigger digital output action_do_i lt 0 ndo 1 gt _ duration 1 999 6 6 The duration of digital output is triggered in seconds action_server_i lt 0 4 gt _ enable 0 1 6 6 To enable or disable this server action The default value is 0 action_server_i lt 0 4 gt _ media NULL 0 4 6 6 The index of attached media Group server_i lt 0 4 gt PARAMETER VALUE SECURITY DESCRIPTION get set name string 40 6 6 The identification of this entry type email 6 6 Indicate the server type ftp email is email server http ftp is ftp server ns http is http server ns is network storage http_url stri
63. ion E Basic Reboot the device Network ivideo Reboot Audio E P RGN Restore User Management g gt Ehina Restore all settings to factory default values except settings in the Network page i Network ce SIP Filtering Restore Bs HRT Factory default Event Setup Recording Restore all settings to factory default i Peripherals System log Defauit Maintenance Upgrade firmware Version 4103c Select firmware file Browse Upgrade Appendix A Troubleshooting Reset and restore Power DC12V lt th To power adapter To network Ee T To video in I_D To audio input I ID To speaker input To sensor amp alarm Reset Button Power Activity Red LED Green LED a There is a button in the cable of the Network Camera It is used to reset the system or restore the factory default settings Sometimes resetting the system sets the system back to normal state If the system problems remain after reset restore the factory settings and install again RESET Click on the button RESTORE Press on the reset button continuously for 30 seconds A Restoring the factory defaults will erase any previous settings Reset or restore the system after power on B URL commands of the Network Camera Overview For some customers who already have their own web site or web control application Network Camera Video server can be easily integrated throug
64. isabled Installation Wizard Device Selection Please check the MAC and model name in the product label of your device first Then you can start to link to your device and show the main screen by double clicking the E item in the above selection list wye So am cE Fe ae Pr 18 tk ts pm em ee SE Si ea resene at If you are not able to find your device in the eae n twaa above selection list please make sure all cables are properly connected to your device and then click on the Refresh Devices button You can find the product label in the rear bottom part of your device User interface of Installation Wizard after clicking on the arrow button Action buttons Installation Wizard Device Selection IP Address Model 00 11 6B 80 8B 0C 192 168 50 156 FCS 3021 y 3 Refresh Devices a Firmware Upgrade f Model No FCS 3021 2 Please check the MAC and model name in the mn Hit Ii Restore product label of your device first EM Default Then you can start to link to your device and tiles I show the main screen by double clicking the T About item in the above selection list IW i If you are not able to find your device in the above selection list please make sure all cables are properly connected to your device and then click on the Refresh Devices button You can find the product label in the rear bottom part of your device Refresh devices Cli
65. l output turn into normal state S esueve De Administrator s capability Fine tuning for Best Performance Best performance generally equates to the fastest image refresh rate with the best video quality and at the lowest network bandwidth as possible The three factors Maximum frame rate Constant bit rate and Fixed quality for MPEG 4 mode and Maximum frame rate and Fixed quality for JPEG mode on the Audio and Video Configuration page are correlative to allow for achieving the best performance possible oe eal FCS 5020 IP Network Camera wi IR faecal Cola sie u vedas Vides rior Eip D hira ki Hydra bti gt 5 Dmir ie gd ea ces pees eed mapt Hien r my a mpa knari Belle Payara Papi Erme PPr irre pe berey Fira Hareg yarr Tuki pH poet bet rpi fomi maty aie PEF Bgn bew riy kibra pari For Viewing by Mobile Phone Most 3GPP cell phone supports media streaming with MPEG4 video and GSM AMR audio Due to the limitation of the bandwidth for 3GPP only 176x144 video solution will be supported for cell phone viewing Please set related video settings first as mentioned when viewing by mobile phone For Best Real time Video Images To achieve good real time visual effect the network bandwidth should be large enough to allow a transmission rate of greater than 20 image frames per second If the broadband network is over 1 Mbps set the Constant bit rate to 1000Kbps or 120
66. m r pa the hecteseer sed p niti password tee year ilovico Aayone whe Gere met havo cocrect passed cannot access the device Il yew teeget your adininietrere pasewerd yess device mad be restored te detent somm y System setting page Cancel Click on this button to cancel the setup progress Click on this button to keep the present setting and go to the next page Change Host Name The Hostname is used for the homepage title of main page and is displayed as the title in the video window of the main page The maximum string length is 40 characters or 20 characters in double byte character systems like Chinese or Japanese But for some models supported Unicode the maximum string length depends on the characters you input and it may less than 20 characters Change root password To change the administrator s password type the new password in both Password and Confirm Password text boxes identically What is typed will be displayed as asterisks for security purposes The maximum password depends on the server you connected Adjust date and time Date Time setup Date 2007 4 20 Time 09 20 54 hh mm ss O keep current date and time O Synchronize with computer time OSet date and time manually Synchronize to network time server automatically Date Time setup There are three ways to adjust system date and time 1 Synchronize with computer time The easiest way is to make devi
67. me The login name of PPPoE account Password The password of PPPoE account Confirm password Input password again for confirmation Audio and Video This product supports dual stream It provides two setting for video streams but only one setting for audio Video Settings FCS 5030 IP Network Camera w IR ca Video Live View Local Settings Video settings System Configuration Basic Video title Network Color Color Video Video orientation E Flip Mirror Audio Modulation Auto System Overlay title and time stamp on video and snapshot Enable cutting noise User Management Advanced Image Settings Privacy Mask Maintenance Video quality settings for stream t E Frame mode Mode le Frame size Maximum frame rate intra frame period Video quatity O Constant bit rate Fixed quality Video quality settings for stream 2 F Frame mode Mode Frame size Maximum frame rate intra frame period Video quality Constant bit rate Fixed quality Version GtG MPEG 4 v 703 480 704x575 30 fps v igs 512 Kbps Good X REG A 276x120 176x144 Sips v EE w 40 Kbps v Good X Video title The text string can be displayed on video Color Select either for color or monochrome video display Video orientation Flip Vertically rotate the video Mirror Horizontally rotate the video Check options both if the Network Camera is i
68. ng 128 6 6 The url of http server to upload http_username string 64 6 6 The username to login in the server http_ passwd string 64 6 6 The password of the user ftp_address string 128 6 6 The ftp server address ftp_username string 64 6 6 The username to login in the server ftp_ passwd string 64 6 6 The password of the user ftp_port 0 65535 6 6 The port to connect the server ftp_location string 128 6 6 The location to upload or store the media ftp_passive 0 1 6 6 To enable or disable the passive mode 0 is to disable the passive mode 1 is to enable the passive mode email_address string 128 6 6 The email server address email_ username string 64 6 6 The username to login in the server email_ passwd string 64 6 6 The password of the user email_senderemail string 128 6 6 The email address of sender email_recipientemail string 128 6 6 The email address of recipient ns_location string 128 6 6 The location to upload or store the media ns_username string 64 6 6 The username to login in the server ns_passwd string 64 6 6 The password of the user ns_workgroup string 64 6 6 The workgroup for network storage Group media_i lt 0 4 gt PARAMETER VALUE SECURITY DESCRIPTION get set name string 40 6 6 The identification of this entry type snapshot 6 6 The media type to send to the server or systemlog store by the server videoclip snapshot_s
69. ng capacty 1000 Kbytes 1000 200000000 Fie sze for each recording 200 Kbytes 200 0000 Fide name corel Save Care Recording name The unique name for recording entry Enable this recording Check it to enable this event Priority The recording with higher priority will be executed first Source The source of stream stream1 or stream2 The weekly and time schedules are provided Sun Sat Select the days of the week to perform the event Time shows Always or input the time interval Destination Network storage server user added Max recording capacity The total size for cycle recording in Kbytes File size for each recording The single file size in Kbytes File Name Prefix The prefix name will be added on the file name of the recording Peripherals FCS 5030 IP Network Camera w IR 5 RG fe Peripherals Live View Local Settings DI and DO System Configuration Digital input Basic The active state is Low The current state detected is High Network i video Digital output F Auiceo The active state is Grounded v The current state detected is Open i System User Management Save E Advanced Network IP Filtering Motion detection Event Setup Recording Peripherals System log Maintenance Mh Version 9109c Digital input Select High or Low to define normal status of the digital input The current sta
70. ngs without incorporating the changes Privacy Mask 3 hittp 192 168_3 65 Privacy Mask Microsoft Internet Explorer gt Privacy Mask Enable privacy mask Window Name x40 Width96 Height 2 Save D ARAR Click on the button to pop up another window to set privacy mask window All users can not view the block under privacy mask window Enable privacy mask Check this option to turn on privacy mask _New Click on this button to add a new window At most five windows can exist simultaneously Use the mouse to click hold and drag the window frame to resize or the title bar to move Clicking on the x at the upper right hand corner of the window deletes the window Remember to click save in order to validate the changes The base of window axis is eight You can see the X Y width and height of the window ESE Click on this button to save the related window settings Window Name The text will show at the top of the window The following figure shows the screen when ESE is clicked and the privacy mask is enabled 23 hitp 192 168_3 65 Privacy Mask Microsoft Internet Explorer gt Privacy Mask Enable privacy mask Window Name mask x96 Width96 Height 2 System FCS 5030 IP Network Camera w IR Live View Local Settings Host name FCS 5030 IP Network Camera w IR System Configuration Basic System Time i Network ivideo Time zone GMT 08 00 Beijing Chongging Hong Kong Kuala
71. nstalled upside down Modulation Select the video input modulation types NTSC PAL and Auto After Change the modulation type please reboot the video server to make the change take effect Overlay title and time stamp on video and snapshot Check it the title is shown on video and snapshot Enable cutting noise Check it for PAL camera The resolution will be compromised to 688 576 or 688 480 once this setting is checked There are different video quality settings for stream1 and stream2 Mode It can be MPEG 4 or JPEG If MPEG 4 is selected it is streamed in RTSP protocol If JPEG is selected it is streamed in server push mode Frame size Both MPEG 4 and JPEG have three options including QCIF 176x120 NTSC and 176x144 PAL CIF 352x240 NTSC and 352x288 PAL and 4CIF 704x480 NTSC and 704x576 PAL There are three dependent parameters provided in MPEG 4 mode for video performance adjustment Intra frame period The interval of intra frame Maximum frame rate This limits the maximal refresh frame rate which can be combined with the Video quality to optimize bandwidth utilization and video quality Choose Constant bit rate If the user wants to fix the bandwidth utilization regardless of the video quality choose Fixed quality and select the desired bandwidth The video quality may be poor due to the sending of maximal frame rate within the limited bandwidth when imag
72. nt in event section Enter one event name and enable this event Check the weekdays as you need and give the time interval to monitor the motion detection every day Select the Trigger on Motion detection and Check the window name set in step 5 Set the appropriate delay time to avoid continuous false alarms following the original event Check the server name set in Step 10 and select the media name set in Step 11 13 Click on save to validate Software revision upgrade Customers can obtain the up to date software from the web site of LevelOne An easy to use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks The upgrade function is opened to the Administrator only To upgrade the system follow the procedures below 1 Download the firmware file named xxx pkg from the appropriate product folder 2 Run the Installation Wizard and proceed following the prompts Refer to the instructions of the Installation Wizard on CD ROM for details 3 Or upgrade firmware from HTTP web page directly 4 The whole process will finish in a few minutes and it will automatically restart the system If power fails during the writing process of Flash memory the program in the memory of the Network Camera may be destroyed permanently If the Network Camera cannot restart properly ask your dealer for technical service Definitions in Configuration Only the Administrator can access system configuration E
73. o which the receiver is connected Consult the dealer or an experienced radio TV technician for help Shielded interface cables must be used in order to comply with emission limits Europe CE This digital equipment fulfills the requirement for radiated emission according to limit B of EN55022 1998 and the requirement for immunity according to EN50082 1 1992 Liability LevelOne Inc cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice LevelOne Inc makes no warranty of any kind with regard to the material contained within this document including but not limited to the implied warranties of merchantability and fitness for any particular purpose GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using
74. of shipping ICE FE ME83
75. om PeanutHull DHS gt dhs org CustomSafe100 DynInterfree gt dyn interfree it PeanutHull gt peanut hull CustomSafe100 gt Custom server using safe100 method lt provider gt _hostna string 128 6 6 Your dynamic hostname me lt provider gt _usernam string 64 6 6 Your user or email to login ddns eemail service provider lt provider gt _passwor string 64 6 6 Your password or key to login ddns dkey service provider lt provider gt _serverna string 128 6 6 The server name for safe100 me This field only exists for provider is customsafe100 Group upnppresentation NAME VALUE SECURITY DESCRIPTION get set enable lt boolean gt 6 6 Enable or disable the UPNP presentation service Group upnpportforwarding NAME VALUE SECURITY DESCRIPTION get set enable lt boolean gt 6 6 Enable or disable the UPNP port forwarding service upnpnatstatus 0 3 6 7 The status of UpnP port forwarding used internally 0 is OK 1 is FAIL 2 is no IGD router 3 is no need to do port forwarding Group syslog NAME VALUE SECURITY DESCRIPTION get set enableremotelog lt boolean gt 6 6 enable remote log serverip lt IP address gt 6 6 Log server IP address serverport 514 6 6 Server port used for log 1025 65535 level 0 7 6 6 The levels to distinguish the importance of information 0 LOG_EMERG 1 LOG_ALERT 2 LOG_CRIT
76. on of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consis tent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software
77. on your server model and network bandwidth We recommend you do the upgrade process in wired LAN environment rather than PPPoE or wireless environment Upgrade Firmware Firmware upgrade is in progress O 1 upgrade is completed Elapsed time 0 00 06 Update progress After the upgrade process had been done you could see the dialog window as below Please click on the button OK to finish it Firmware Upgrade a 1 Firmware upgrade for all selected devices succeeded Cx Upgrade Done Initial Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately after software installation onto the Local Area Network The Administrator should complete the network settings on the configuration page including the correct subnet mask and IP address of gateway and DNS Ask your network administrator or Internet service provider for the detail information By default the Network Camera requires the Administrator to run installation every time it reboots If the network settings are to remain unchanged disable the Install option Refer to Network settings on the System Configuration page for details If any setting is entered incorrectly and cannot proceed to setting up the Network Camera restore the factory settings following the steps in the Troubleshooting chapter of the Appendix Add Password to prevent Unauthorized Access The default Administrator s
78. onnection 5 deny_i lt 0 9 gt _end 1 0 0 0 6 6 Denied ending IP address for 255 255 255 25 RTSP connection 5 Group videoin NAME VALUE SECURITY DESCRIPTION get set cmosfreq 50 60 4 4 CMOS frequency whitebalance auto 4 4 auto auto white balance indoor indoor 3200K fluorescent outdoor fluorescent 5500K outdoor gt 5500K Group videoin_c lt 0 n 1 gt for n channel products m is stream number NAME VALUE SECURITY DESCRIPTION get set color 0 1 4 4 0 gt monochrome 1 gt color flip lt boolean gt 4 4 flip the image mirror lt boolean gt 4 4 mirror the image ptzstatus lt integer gt 1 7 An 32 bits integer each bit can be set separately as follows Bit 0 gt Support camera control function O not support 1 support Bit 1 gt camera O external 1 build in Build in or external Bit 2 gt Support pan operation O not support 1 support Bit3 gt Support tilt operation O not support 1 support Bit 4 gt Support zoom operation O not support 1 support Bit 5 gt Support focus operation O not support 1 support text string 16 1 4 enclosed caption imprinttimestamp lt boolean gt 4 4 Overlay time stamp on video maxexposure 1 120 4 4 Maximum exposure time s lt 0 m 1 gt _codectyp mpeg4 mjpeg 4 4 video codec type e s lt 0 m 1 gt _keyinterv 1 3 5 10 30 4 4 Key frame interval al
79. ource lt integer gt 6 6 Indicate the source of media stream 0 means the first stream 1 means the second stream and etc snapshot_prefix string 16 6 6 Indicate the prefix of the filename snapshot_datesuffix 0 1 6 6 To add date and time suffix to filename or not 1 means to add date and time suffix 0 means not to add it snapshot_preevent 0 7 6 6 It indicates the number of pre event images snapshot_postevent 0 7 6 6 The number of post event images videoclip _source lt integer gt 6 6 Indicate the source of media stream 0 means the first stream 1 means the second stream and etc videoclip_prefix string 16 6 6 Indicate the prefix of the filename videoclip_preevent 0 9 6 6 It indicates the time of pre event recording in seconds videoclip maxduration 1 10 6 6 The time of maximum duration of one video clip in seconds videoclip_maxsize 50 1500 6 6 The maximum size of one video clip file in Kbytes Group record_i lt 0 1 gt PARAMETER VALUE SECURITY DESCRIPTION get set name string 40 6 6 The identification of this entry enable 0 1 6 6 To enable or disable this recoding priority 0 1 2 6 6 Indicate the priority of this recoding 0 indicates low priority 1 indicates normal priority 2 indicates high priority source lt integer gt 6 6 Indicate the source of media stream O means the first stream 1 means the second stream and etc weekday lt interger gt
80. password is blank and the Network Camera initially will not ask for any password The Administrator should immediately implement a new password as a matter of prudent security practice Once the Administrator s password is saved the Network Camera will ask for the user s name and password before each access The Administrator can set up a maximum of twenty 20 user accounts Each user can access the Network Camera except to perform system configuration Some critical functions are exclusive for the Administrator such as system configuration user administration and software upgrades The user name for the Administrator is permanently assigned as root Once the password is changed the browser will display an authentication window to ask for the new password Once the password is set there is no provision to recover the Administrator s password The only option is to restore to the original factory default settings How to Use A PC with Windows operating system can use the Internet Explorer to connect to the Network Camera A plug in will be installed into the IE when it is connected for the first time A PC with Linux operating system can connect to the camera using a browser like Firefox It needs to install QuickTime first to view streaming Authentication After opening the Web browser and typing in the URL of the Network Camera a dialogue window pops up to request a username and password Upon successful authentication the follo
81. password or authentication of the selected user and press to take effect Advanced Network FCS 5030 IP Network Camera w IR PEES nticat a t Cag HTTP port B0 i Secondary HTTP port 8080 E Access name for stream 1 video mipg ___ System loo access name for stream 2 video2 mipg Version 0100 Two way audio Two way audio port 5060 RTSP Streaming Authentication disable Access name for stream t kve sdp Access name for stream 2 five2 sdp RTSP port 554 RTP port for video 5556 RTCP port for video RTP port for audio 5558 RTCP port for audio Multicast settings for stream 1 Always multicast Multicast group address 339 178 1 99 Multicast video port 5560 Multicast RTCP video port Multicast audio port 5562 Multicast RTCP audio port Multicast TTL 1 255 15 Multicast settings for stream 2 L Always multicast Multicast group address 239 128 1 100 Multicast video port 5564 Multicast RTCP video port Multicast audio port 5565 Mulbcast RTCP audio port Multicast TTL 1 2553 Save DDNS Enable DDNS This option turns on the DDNS function Provider The provider list contains seven hosts that provide DDNS services Please connect to the service provider s website to make sure the service charges Host Name If the User wants to use DDNS service this field must be filled Please input the hostname that is registered in the DDNS server Username E mail The Username or E mail field is n
82. rk Camera chapter serves to be a helpful reference to customize existing homepages or integrating with the current web server For paragraphs preceded by A the reader should use caution to understand completely the warnings Ignoring the warnings may result in serious hazards or injuries Table of Contents Package COMleNL iahcasanricnnceaniadmanndanes A T tae cnnann niece iia 5 INStAlALON i sinirini sat dee ed ceaeein ceva nev e ed aAa a ees sees urevet readers 6 Hardware installation nssr eeni aea Ea EET anes AEA RTA 6 Software installation sssiceoerse eiie reide a iaeo e i awe 9 How to Use Installation Wizard s s ssssssssssrrssssnssrnrrnrrrnnnnurnnnrrrnnnurnnnerene 10 Using Installation Wizard ssssssssssusrrnrrnnrnnrsnunrnnrrnrununrnnnrnrrnnnnunnrene 12 Initial Access to the Network Camera ssssssssssrssssusernnrrrnrrnrunurnnnrrnrrnunrnurrene 29 Check Network Settings icceiveswuntestaccenivaleneia Ga advair nneieaavensuinetnneea dae 29 Add Password to prevent Unauthorized ACCESS cccceeeeeecseeeeeeeeeeeeneeenees 29 How to USC wc iieiieuatsievesedneatdune Davee aaraa a ENEN EAEE 29 FRULNONMCAUO Meats icin rennin oani Eie Eai rE pe anarau abled anus nolan sane ed ate 30 Installing plug annie Reuse tadedlnedulenner awendlenn staan r lean 31 Primary USer s Capability issena a a A NAAA E tena AATE EGAR 32 Main Screen with Camera VIEW sssssssssssssssrurrnnrrnnununrnnrrnnrnunnnnrnrnrrnns 32 Digital ZOOM ares a
83. rn page gt Redirect to the page lt return page gt after the parameter is assigned The lt return page gt can be a full URL path or relative path according the the current path If you omit this parameter it will redirect to an empty page note The return page can be a general HTML file htm html or a LevelOne server script executable vspx file It can not be a CGI command It can not have any extra parameters This parameter must be put at end of parameter list Return HTTP 1 0 200 OK r n Content Type text html r n Context Length lt length gt r n r n lt parameter pair gt where lt parameter pair gt is lt parameter gt lt value gt r n lt parameter pair gt Only the parameters that you set and readable will be returned Example Set the IP address of server to 192 168 0 123 Request http myserver cgi bin admin setparam cgi network _ipaddress 192 168 0 123 Response HTTP 1 0 200 OK r n Content Type text html r n Context Length 33 r n r n network ipaddress 192 168 0 123 r n Available parameters on the server Valid values VALID VALUES DESCRIPTION string lt n gt Text string shorter than n characters password lt n gt The same as string but display instead integer Any number between 2 1 and 2 1 positive integer Any number between 0 and 2 1 lt m gt lt n gt Any number
84. someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow GNU GENERAL PUBLIC LICENSE Terms And Conditions For Copying Distribution And Modification 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of r
85. ssword System Configuration E Basic Note Leaving the root password field empty means the camera will not be protected by password Network Root Password Coeeesoesooors Video Confirm root password seececcooesces Audio System Save User Management a si Add User Manikanancg User name Version 01000 User password User type Administrator zj Operator 5 Viewer Add Manage User user name User password User type Administrator Operator 3 Viewer Save Delete Root password Change the Administrators password by typing in the new password identically in both text boxes The typed entries will be displayed as asterisks for security purposes After pressing Save the web browser will ask the Administrator for the new password for access Add user Type the new user s name and password and press to insert the new entry The new user will be displayed in the user name list There is a maximum of twenty user accounts There are three kinds of authentication Administrator Operator and Viewer Administrator can fully control the camera operation Operator s access right can modify most of camera s parameters except some privilege and network options Viewer can view listen to camera control DIDO of camera Network Camera can provide twenty accounts for your valuable customers or friends Manage user Pull down the user list to find the user s name and press to delete the selected user Or edit the
86. t change the server port of connection accordingly FTP FTP port This can be other than the default port 21 The user can change this value from 1025 to 65535 After the changed the external FTP client program must change the server port of connection accordingly RTSP Streaming Authentication It supports disable basic and digest modes Access name for stream 1 This is the access URL of stream 1 for making connection from client software when the codec type is MPEG 4 Access name for stream 2 This is the access URL of stream 2 for making connection from client software when the codec type is MPEG 4 Using rtsp lt ip address gt lt access name gt to make connection RTSP port This can be other than the default Port 554 RTP port for video The video channel port for RTP It must be an even number RTCP port for video The video channel port for RTCP It must be the port number of video RTP plus 1 RTP port for audio The audio channel port for RTP It must be an even number RTCP port for audio The audio channel port for RTCP It must be the port number of audio RTP plus 1 User can modify Multicast setting for stream1 and stream2 Always multicast Select it to enable multicast always Multicast group address It is used by sources and the receivers to send and receive content Multicast video port The video channel port for multicast It must be an even number
87. t information please contact your ISP After inputting the account information please click on the Next button to continue your next step LAN Setting If you click on No in the Network Type dialog window you will be led to the Network setting page In this page you can change the server s IP address subnet mask default gateway primary DNS server secondary DNS and DHCP server Please refer to the below page Hatwork Settings Res Fait Vem 2 A i E Steg iss Sete Step Qo Mebwcrk Setting Bicep by DHP Bamer suboriaticaly IP aches Bahrert meak Debut giera Network Setting for LAN You could set up the network with DHCP or fixed IP 1 DHCP Check the Get IP by DHCP Server automatically will force the device to renew its IP address whenever it reboots and the related network configuration is provided by the DHCP server 2 Fixed IP If you want the device to use a fixed IP please uncheck the Get IP by DHCP Server automatically checkbox and assign a valid IP address subnet mask default gateway and DNS server for the device Mobile Access After finished the DDNS setting and click on the Next button If your device supports mobile viewer and you want to access the device by mobile phone you can enable the Mobile Access by clicking on the Yes button The Installation Wizard will do some setting for mobile viewing toward the device 1 Video The video codec will be set to MPEG 4 and the r
88. t of IP ranges If you want to add a new IP address range type the Start IP Address and End IP Address in the text boxes and click on the Add button If you want to remove an existing IP address range just select from the pull down menu and click on the Delete button Both the Allow List and Deny List can have 10 entries Motion detection Enable motion detection Check this option to turn on motion detection _New Click on this button to add a new window At most three windows can exist simultaneously Use the mouse to click hold and drag the window frame to resize or the title bar to move Clicking on the x at the upper right hand corner of the window deletes the window Remember to save in order to validate the changes Click on this button to save the related window settings A graphic bar will rise or fall depending on the image variation A green bar means the image variation is under monitoring level and a red bar means the image variation is over monitoring level When the bar goes red the detected window will also be outlined in red Going back to the homepage the monitored window is hidden but the red frame shows when motion is detected Window Name The text will show at the top of the window Sensitivity This sets the endurable difference between two sequential images Percentage This sets the space ratio of moving objects in the monitoring window Higher sensitivity and small percentage will allow easi
89. t state gt r n do2 lt state gt r n do3 lt state gt r n where lt state gt can be 0 or 1 Example Query the status of digital output 1 http myserver cgi bin dido getd do1 1 r n Capture single snapshot Note This request require normal user privilege Method GET POST Syntax http lt servername gt cgi bin viewer video jpg channel lt value gt amp resolution lt value gt amp quality lt value gt If the user requests the size larger than all stream setting on the server this request will failed PARAMETER VALUE DEFAULT DESCRIPTION channel 0 n 1 0 the channel number of video source resolution _ lt available 0 The resolution of image resolution gt quality 1 5 3 The quality of image Server will return the most up to date snapshot of selected channel and stream in JPEG format The size and quality of image will be set according to the video settings on the server Return HTTP 1 0 200 OK r n Content Type image jpeg r n Content Length lt image size gt r n lt binary JPEG image data gt Account management Note This request requires administrator privilege Method GET POST Syntax http lt servername gt cgi bin admin editaccount cgi method lt value gt amp username lt name gt amp userpass lt value gt amp privilege lt value gt amp privilege lt value gt amp return lt return pa
90. tton a Refresh Devices button and an arrow button on the left panel of your user interface When you click on the arrow button you will see more advanced functional buttons Firmware Upgrade Restore Default and About IW You can select your device by double clicking it in the device list The left three buttons Manual Setup Firmware Upgrade and Restore Default won t be enabled until you select at least one device Installation Wizard Device Selection ation Wizard Selecta device to setup or upgrade 4 E REDE B RA as my re z level MAC IP Address Model 00 11 6B 80 88 0C 192 168 50 156 FcS 3021 Model No FCS 3021 Please check the MAC and model name in the Mae Restore product label of your device first MAs 1 16BS XXXX Default Then you can start to link to your device and N n show the main screen by double clicking the About item in the above selection list I If you are not able to find your device in the above selection list please make sure all cables are properly connected to your device and then click on the Refresh Devices button You can find the product label in the rear bottom part of your device User interface of Installation Wizard Installation Wizard allows you to setup one device at one time and upgrade multiple devices of the same model at the same time If you selected different models then the Firmware Upgrade button would be d
91. tus is shown too Digital output Select Grounded or Open to define normal status of the digital output The current status is shown too System log The Network camera support log the system messages on remote server The protocol is compliant to RFC 3164 If you have external Linux server with syslogd service use r option to turn on the facility for receiving log from remote machine Or you can use some software on Windows which is compliant to RFC 3164 Check Enable remote log and input the IP address and port number of the log server to enable the remote log facility In the Current log it displays the current system log file The content of the log provides useful information about configuration and connection after system boot up FCS 5030 IP Network Camera w IR Ee System log Live view Local Settings Remote Log System Configuration Basic Enable remote log Network Log server settings Video IP address Audio port 514 i System r User Management Save E Advanced f Current Log i ar 6 14 34 26 syslogd 1 4 1 restart iP Fitenng Mar 6 14 34 30 DRM Service Starting DRM service E j Motion detection ar 6 14 34 41 SYS Serial number 000201067F00 Event Setup ar 6 14 34 41 SYS System starts at Thu Mar 6 14 34 41 UTC 2008 i Recording IE Mar 6 14 34 41 NET NET INFO peripherals ar 6 14 34 41 NET Host IP 192 168 10 248 E ar 6 14 3
92. unning the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified progr
93. w to show the snapshot Users can point at the snapshot and click the right button of mouse to save it Coagit at Chet pret Print Picture on Oi Go to My Pictures j Set as Background d Set as Desktop Item Copy hortcut Add to Favorites Properties Local Settings FS 5030 IF Network Camera wi IR 1 g jei eer Berge i bye ie Speen eR Iram Dp F m l arem T 2 APL Gd medi Cylons L B jeo med iha Hdmi Ini kiic nk Oia Darans E RPR p les UDF LPC ET LOP Plier arr agi 4 HP fared Cele roe Pres Fhe oe CLP H imi dria aed bea es ji Ea raea aha There are four settings for the client side in IE 1 The first one is Stream Options for users to determine which stream to be streaming This product supports dual stream Therefore there are two streams to choose 2 The second one is MPEG 4 Media Options for users to determine which media to be streaming under MPEG 4 mode 3 The third one is MPEG 4 Protocol Options which allows choices on connection protocol between client and server There are four protocols choices to optimize your usage UDP unicast UDP multicast TCP and HTTP The UDP unicast protocol allows for more real time audio and video streams However some packets may be lost due to network burst traffic and images may be obscured The UDP multicast protocol allows to save the bandwidth of server while serving multiple clients
94. wing figure is displayed The foreground is the login window and the background shows the message if authentication fails The user may check the option box to save the password for future convenience This option is not available to the Administrator for obvious reason HS 192 168 3 65 streaming_server ZERO G EE CP B Litters RB Installing plug in For the initial access to the Network Camera in Windows the web browser may prompt for permission to install a new plug in for the Network Camera on the Internet Explorer Permission request depends on the Internet security settings of the user s PC or notebook If the highest security level is set the computer may prohibit any installation and execution attempt This plug in has been registered for certificate and is used to display the video in the browser Users may click on to proceed If the web browser does not allow the user to continue to install check the Internet security option and lower the security levels or contact your IT or networking supervisor for help Security Warning Do you want to install and run MPEG4 SHM Audio Control signed on 4 12 2005 2 13 PM and distributed by Digital Data Communications Asia Co Ltd Publisher authenticity verified by VeriSign Class 3 Code Signing 2004 CA Caution Digital Data Communications Asia Co Ltd asserts that this content is safe You should only install view this content if you trust Digital D
95. xecuted first Delay second s before detecting next event The delay to check next event It is used in motion detection and digital input trigger type There are four kinds of trigger supported Video motion detection Select the windows which need to be monitored Periodic The event is triggered in specified intervals The unit of trigger interval is minute Digital input To monitor digital input System boot The event is triggered when the system boots up The weekly and time schedules are provided Sun Sat Select the days of the week to perform the event Time show Always or input the time interval The default action is triggering DO If there are servers configured the user can select them from Server name too D O Check it to trigger digital output for specific seconds when event is triggered Server Server name Server type Email Sender email address winson ddcasia com tw Recipient email address winson ddcasia com tw Server address ms32 hinet net User name Password FTP Server address Server port 21 User name Password Remote folder name Passive mode HTTP URL http f User name Password Network storage Network storage location for example my_nas disk folder Workgroup User name _ Password Server name The unique name for server There are four kinds of servers supported Th
96. you selected Firmware version The version number of the selected firmware Select Firmware You can use the Select firmware button to browse the file that you want upgrade onto the selected device s After selected the file Installation Wizard will check whether the file you selected is correct If it s the correct version then the package information will display the information about the file and enable the Start Upgrade button Therefore you can click on the button to upgrade the firmware If not then it will be a pop up warning message ra ast LAL Ow pike a 4E i hates g TEME REHNE epg PC T he phr EFAN pia niei pkgi Select firmware Installation Wizard Firmware Upgrade Firmware Upgrade Selected model FCS 3021 Selected devices information MAC address 00 11 68 80 8B 0C Firmware version 0100d Selected firmware information Firmware version unspecified Please select a firmware to upgrade the selected devices Select firmware uments and Settings fw FCS 3021 0100d fw pkg Start upgrade Invalid Firmware D The model is unmatched n Warning message for unmatched firmware Start Upgrade Clicking on the Start Upgrade button to upgrade the firmware of the selected device s and it will be a pop up dialog window to show the progress of the upgrading process Usually it will take about 5 to 10 minutes to finish the firmware upgrading It depends

Manual - LevelOne

Contents

Download Pdf Manuals

Related Search

Related Contents