DC-1000 VISUALISER OWNERS MANUAL
Contents
1. 1000 2 PLUG CAMERA IN Connect to PC with a USB cable Any cable up to 5m cable can be used If a longer cable is required use a Vision TC2 USBTP to extend USB over CAT5 cable NOTE Low quality USB cables may cause problems 3 LAUNCH SOFTWARE The software will not run unless camera is connected The laser pointer and LED light can be turned on and off on base of visualiser SOFTWARE OVERVIEW VIDEO TAB default For normal use as visualiser Video tab Video settings 400 00 PA sawado oema Select ea Capture She ecord Video Adusi Sze FitScreen Ful Screen Move Rotate COW Rotate Cy MirorVertical Mirror Horgontai Video controls Captured still and video files appear here 4 DC 1000_manual_en IMAGE TAB Used to view and edit captured stills Image tab Character reader settings Select image to view in Adjustment settings main window 5 DC 1000 manual en TROUBLESHOOTING If your system is not operating properly please refer to the following information If the problem persists disconnect from power and contact your AV reseller immediately Problem Correction PC not recognising camera Try a different USB port on your computer Reboot your computer Note Software does not work for Macs USB overload messages on PC Try an alternative USB port on your PC Insert a powered USB hub between the PC and DC 1000 These can re prioritise USB devices 6 DC 1000 manual en2. DC 1000 VISUALISER OWNERS MANUAL www visionaudiovisual com techcam dc 1000 1 DC 1000_manual_en DECLARATION OF CONFORMITY Where applicable Vision products are certified and comply with all known local regulations to a CB Certification standard Vision commits to ensure all products are fully compliant with all applicable certification standards for sale in the EU and other participating countries The product described in this owner manual is in compliance with RoHS EU directive 2002 95 EC and WEEE EU directive 2002 96 EC standards This product should be returned to the place of purchase at the end of its useful life for recycling WARNINGS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL user to the presence of uninsulated dangerous voltage within the product s enclosure that may be h The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the of sufficient magnitude to constitute a risk of electric shock to persons important operating and maintenance servicing instructions in the literature accompanying the 1 The exclamation point within an equilateral triangle is intended to alert the user to the presence of appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR M
3. OISTURE All products are designed and imported into the EU by Vision who is wholly owned by Azlan Logistics Ltd Registered in England Nr 04625566 at Lion House 4 Pioneer Business Park Clifton Moor York YO30 4GH WEEE Registration GD0046SY vous X OCE DECLARATION OF ORIGIN All Vision products are made in the People s Republic of China PRC 2 DC 1000 manual en LASER RADIATION Potentially harmful laser radiation Do not look into beam Class II laser product PLACE OF INSTALLATION Avoid installing this product under the following conditions e Moist or humid places e Places exposed to direct sunlight or close to heating equipment e Extremely cold locations e Places subject to excessive vibration or dust e Poorly ventilated places Do not expose this product to dripping or splashing DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS PRODUCT WARNING SIGNS If you detect an abnormal smell or smoke turn this product off immediately and unplug the cord Contact your reseller or Vision PACKAGING Save all packing material It is essential for shipping in the event the unit ever needs repair IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY 3 DC 1000_manual_en INSTALLATION INSTRUCTIONS 1 INSTALL SOFTWARE Load the software onto your PC and install A copy can be downloaded from www visionaudiovisual com techcam DC
4. SPECIFICATIONS PRODUCT DIMENSIONS 255 x 109 x 77 mm height x width x depth with boom folded down PACKAGED DIMENSIONS 315 x 170 x 130 mm PRODUCT WEIGHT 0 55 kg PACKAGED WEIGHT 0 67 kg TECHNICAL DETAILS Capture size 310 x 215mm Maximum Resolution 1600 x 1200 pixels DPI 100 300 Colour 24 bit Frame Rate 640 x 480 30fps 1280 x 1024 10fps 1600 x 1200 6fps Optical Zoom N A Digital Zoom maximum 500 CAMERA Sensor Type CMOS Size 1 4 inch Capture Angle 60 degrees Signal to Noise Ratio 42 3Db Dynamic Range 71dB F number 2 8 Effective Focal Length F 3 38mm SOFTWARE FUNCTIONS Optical Character Reader outputs to Microsoft Word Image Capture Formats BMP JPEG PNG TIF J2K JP2 JPC RAS TGA Video Capture Formats AVI WMA Image Adjustment Brightness Contrast Sharpness Saturation Gamma Noise control Cropping Rotating Mirroring Exposure adjustment Black line Grey scale Inverse COLOUR White CONTRUCTION MATERIAL Aluminium and Plastic ACCESSORIES INCLUDED USB cable Capture Software Windows only CONNECTIVITY USB POWER SUPPLY via USB POWER CONSUMPTION Maximum 150mW 3 3V lt 15mA at 30fps lt 5mA standby COMPLIANCES RoHS WEEE and CE compliant DC 1000 manual en WARRANTY This product comes with a 2 year return to base warranty effective from the date of purchase This warranty applies only to the original purchaser and is not transferable For the av
5. e committed to improving our products the details above may change without prior warning This User Manual is published without warranty and any improvements or changes to the User Manual necessitated by typographical errors inaccuracies of current information or improvements to programs and or equipment may be made at any time and without notice Such changes will be incorporated into new editions of the User Manual 8 DC 1000_manual_en
6. oidance of doubt this will be taken from the information held by the appointed national distributor at the point of sale If the product is DOA dead on arrival you have 21 days from purchase date to notify the national distributor via your AV reseller The liability of the manufacturer and its appointed service company is limited to the cost of repair and or replacement of the faulty unit under warranty except for death or injury EU85 374 EEC This warranty protects you against the following e Failure of any components including the power supply e Damage when the product is first removed from its packaging if reported within 24 hours of purchase If you find you do have a problem with this product you should contact the AV reseller you purchased this product from The original purchaser is responsible for shipment of the product to the manufacturer s appointed service centre for repair We will endeavour to return repaired units within 5 working days however this may not always be possible in which case it will be returned as soon as practicably possible In line with our WEEE commitments the manufacturer endeavours to replace the faulty parts of the product rather than replacing the whole unit This warranty does not protect this product against faults caused by abuse misuse incorrect installation unstable or faulty power input which might be caused by ignoring the guidelines set out in this manual LEGAL DISCLAIMER Because we ar
Download Pdf Manuals
Related Search