User Manual for
Contents
1. 00 For Windows 2000 Click on Start point to Settings and then click Control Panel Double click on Power Options On the UPS Tab click Select In the UPS Selection Dialog Box under Manufacturers click None Exit to the desktop and shutdown the computer Turn the UPS off and unplug it Connect the serial interface cable to the UPS and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit 8 Plug the UPS into an AC outlet turn the UPS on and then start your computer 9 Windows will find new hardware 10 Insert the software disk into the floppy drive and follow the on screen instructions 11 When the installation is completed remove the floppy disk ae odie a ade ae For Windows XP Home and Professional 1 Click on Start and then click on Control Panel 2 Double click on Power Options then click on the UPS tab 3 Set the manufacturer to None 4 Exit to the desktop and shutdown your computer Guaranteed Uninterruptible Power System 5 Turn the UPS off and unplug it CPS1100AVR 6 Connect the serial interface cable to serial port on the UPS and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit 7 Plug the UPS into an AC outlet turn the UPS on and start your computer 8 Windows will find new hardware 9 Insert the PowerPanel Plus disk into the floppy drive 10 Follow t2. exhausts the protection capacity of the CyberPower Product or y 2 damages the CyberPower Product This provision sets out the only liability of any character of CyberPower for direct indirect special consequential and or incidental damages under our Limited Warranty applies only to Connected Equipment and all such Liability is limited to the Agreed Damage Amount To make a Warranty claim for damage to Connected Equipment under the Power Control Guarantee you must do the following 1 Complete and return the CyberPower Warranty Registration Card or provide reasonable proof for example a sales receipt that establishes you as the Initial Customer the original consumer purchaser of the Product within ten 10 days of the event for which you want to make a claim for warranty service 2 Call CyberPower at 952 403 9500 or 877 297 6937 toll free or write to CyberPower at 5555 12 Avenue East Suite 110 Shakopee MN 55379 or E Mail CyberPower at tech cyberpowersystems com within ten 10 days of the event for which you want to make a claim for warranty service 3 When you call write or E Mail identify the Product the Purchase Date and the item s of Connected Equipment Have information on all applicable insurance or other resources of recovery payment that are available to the Initial Customer for the Connected Equipment and the name of the power utility supplier for the location of the Connected Equipment and request Return Material A
3. interface or USB adapter cable to the serial port on the UPS and an ESN agg open serial or USB port on the computer If you are not going to Urphig H use the software you do not need to connect a cable 3 With the UPS unit off and unplugged connect your computer monitor and any externally powered data storage device Zip drive Jazz drive Tape drive etc into the battery power supplied outlets Plug your peripheral equipment printer scanner speakers into the full time surge protection outlets DO NOT plug a Dut laser printer copier space heater vacuum or other large electrical device into the UPS The power demands of these devices will overload and possibly damage the unit 4 To protect a fax telephone or modem line connect a telephone cable from the wall jack outlet to the in jack of the UPS Connect a at telephone cable from the out jack on the UPS to the modem port ts l i computer telephone or fax machine a k 5 Plug the UPS into a properly grounded wall outlet Make sure the wall outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical demands e g refrigerator copier etc Avoid using extension cords If used the extension cord must be rated for 15 amps DO NOT plug an extension cord surge suppressor or other multiple outlet device into the battery supplied outlets of the product This will cause an overload and will also VOID the war
4. 6 temperature 7 Closed Application Information Option Button When this option is selected the log will display the names and locations of any files that were auto saved by the software CPS1100AVR Guaranteed Uninterruptible Power System TESTING YOUR UPS SYSTEM Once you have set up your UPS system you may wish to test it Make sure that the UPS has been charged for at least 4 hours before performing this test If you are using PowerPanel Plus 1 With your UPS and computer on open an application such as notepad 2 Enter some data into the application 3 Unplug the UPS from the AC outlet When a power failure occurs PowerPanel Plus will appear on the screen The outlet and battery symbols will change to indicate a power failure The countdown timer will move towards zero When the timer reaches zero the software will begin to save and close any open applications The software will auto assign names to any files that have not been previously saved and then save the file to the PCTemp folder which is located in the root directory of your C drive where C is the name of your main hard drive Once all open files have been saved and closed PowerPanel Plus will shut down the operating system Once the operating system is shutdown the UPS will turn off within 90 seconds Wait until the UPS has turned off before plugging the UPS back into the outlet Once the test has been completed plug the UPS back into the AC outlet and
5. to equipment button and then turn the UPS on Battery not fully charged Recharge the battery by leaving the UPS plugged in The UPS does not perform expected Se Sa Contact CyberPower Systems about replacement batteries at l Battery is slightly worn out tech cyberpowersystems com The on off switch is designed to prevent damage by rapidly Turn the UPS off Wait 10 seconds and then turn the UPS on turning it off and on The UPS will not turn on E ee 0 The unit must be connected to a 110 120v 60Hz outlet Contact CyberPower Systems about replacement batteries at The battery 1s worniout tech cyberpowersystems com Contact CyberPower Systems about at Mechanical problem tech cyberpowersystems com Connect the serial cable to the UPS unit and an open serial port The alae core IS Not on the back of the computer You must use the cable that came i with the unit The serial cable is connected Check the back of the computer for an additional serial port to the wrong port Move the cable to this port _ PowerPanel Plus is inactive all icons are gray The unit is not Shutdown your computer and turn the UPS off Wait 10 seconds providing battery power and turn the UPS back on This should reset the unit The serial cable is not the cable that was provided with the unit You must use the cable that was included with the unit for the software and the unit to be able to communicate SPECIFICATIONS CPS1100AVR Capacity 1100V
6. 1 serial to USB adapter cable 1 telephone communication cable 1 user manual 1 warranty registration card 1 UPS unit DESCRIPTION 7 Electrical Wiring Fault Indicator This LED indicator will illuminate to warn the user that a wiring problem exists with the AC outlet If this LED is illuminated user is advised to unplug all electrical equipment from the outlet and have an electrician check the outlet to insure proper wiring 1 Battery Backup and Surge Protection Outlets 8 AVR Indicator Provides three battery supplied outlets with This LED indicates that the UPS is operating in Automatic Voltage Regulation for consistent output automatic voltage regulation mode power to connected equipment 9 Using Battery Indicator 2 Always On Surge Protection Outlets This illuminates during a utility failure indicating Provides three surge protected outlets to protect that the battery is supplying power to the battery connected equipment against surges and spikes power supplied outlets 3 All outlets Designed for AC Adapters 10 Check Battery Allows six AC power adapter blocks to be plugged This illuminates indicating a weak battery If the into the UPS without making adjacent outlets indicator is still illuminated after allowing the unit inaccessible to charge for 12 hours replace the battery 4 Resettable Circuit Breaker according to the instructions in the Replacing the Located on the side of the UPS the circuit breake
7. 9 Weekly Setting Allow you to schedule a 3 Turn On Select the day date and time that you want shutdown startup based on the day of the week the computer system to restart Can only be used in conjunction with a scheduled shutdown 4 Delete Delete the selected item from the schedule pree 5 Add Adds an item to the sch edul e te E ate mo 6 Cancel This button is used to exit the log window 4 without saving any changes 7 OK This button is used to exit the shutdown window and save any changes Please note You must click Add to add the item to the schedule 3 Figure 5 PowerPanel Plus Log Menu See Figure 6 1 Event Option Button When this option is selected the log will display different PowerPanel Plus events such as power failure program start and program end 2 Log Display This area displays the information as 7 6 selected by the Event Closed Application he Information or Data Record option button 1 Event Closed Application Information Data Record a 5 3 Clear Clears the selected log in es 4 Cancel Exits the screen without saving any pele oc pa 3 changes 2 5220 UPS communication cant establish 5 OK Exits the screen and saves any changes 5252 UPS commumeaton cart each 6 Data Record Option Button When selected the Sia LPS cammunicaiion cant establish log will display a record of the items that are shown in E A ea a e e the main window such as input output voltage and Figure
8. A 660W input Frequenc 57Hz to 63Hz RM Voltage Range 90v 145v AVR Max boost 12 of input voltage for output regulation while input voltage is from 10 to 30 under nominal Line Conditioning Regulation AVR buck 12 of input voltage for output regulation while input voltage is from 10 to 26 over nominal UPS Output On a Me Voltage 120 Vac 5 user adjustable Transfer Time 4ms typical including detection time On Battery Output Wave Form Simulated Sine Wave Form Max Load 1100VA 660W Full time Surge Protection Output Max Load 12 Amps dee ah RS 232 with Plug and Play interface USB Adapter Soman ton Win 98 Win NT Win 2000 Win ME Win XP s Power On Electrical Wiring Fault AVR Using Battery Check ee oe LED Indicators Battery Output Receptacles 3 Battery powered and full time surge protection 6 full time surge protection 10 CPS1100AVR Guaranteed Uninterruptible Power System LIMITED WARRANTY AND POWER CONTROL GUARANTEE In purchasing a CPS1100AVR in the United States or Canada the original end user receives a Limited Warranty and CyberPower s Power Control Guarantee from Cyber Power Systems USA Inc for ease of reading referred to as CyberPower The Limited Warranty and the Power Control Guarantee are intended to be the initial end user s exclusive rights and remedies The Limited Warranty and the Power Control Guarantee are separate all though they are related Limited Warranty The original
9. CyberPower y t Pa EN per PONS il EES Cy PEI Fe F errata si Pa ae a amp 1 gt e User Manual for CPS1100AVR with USB Serial Interface and PowerPanel Plus Software ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT www cyberpowersystems com faqs htm CPS1100AVR Guaranteed Uninterruptible Power System TABLE OF CONTENTS Determining Power Requirements 1 Battery Replacement 6 Description 1 LED Indicators 7 Hardware Installation Guide 2 Trouble Shooting Guide 8 Software Installation Guide 2 Specifications 8 Software User Manual 4 Warranty 9 Thank you for purchasing a CyberPower Systems Product To enjoy all the features and benefits of this Uninterruptible Power System UPS please read and follow all installation and operation instructions completely This UPS is designed to provide guaranteed power protection for connected electronic equipment The accompanying PowerPanel Plus software saves data closes open applications and automatically shuts down your computer system in an intelligent and orderly manner IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important safety instructions Please read and follow all instructions carefully during inst
10. allation and operation of unit Read this manual thoroughly before attempting to install or operate CAUTION To prevent the risk of fire or electric shock install in a temperature and humidity controlled indoor area free of conductive contaminants Please see specifications for acceptable temperature and humidity range CAUTION To reduce the risk of electric shock do not remove the cover secured by star shaped screws No user serviceable parts are inside except for the battery Refer servicing to qualified personnel CAUTION The battery can energize hazardous live parts inside even when the AC input power is disconnected CAUTION UPS must be connected to an AC power outlet with fuse or circuit breaker protection Do not plug into an outlet that is not grounded If you need to de energize this equipment turn off and unplug the unit CAUTION To avoid electrical shock turn off the unit and unplug it from the AC power source before servicing the battery or installing a computer component DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT CyberPower Systems does not sell products for life support or medical applications or for use in any circumstance that would affect operation or safety of any medical for life support or medical applications or patient care DO NOT USE WITH OR NEAR AQUARIUMS To reduce the risk of fire do not use with or near aquariums Condensation from the aquarium can cause the unit to short out CPS1100AVR Gu
11. aranteed Uninterruptible Power System HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT 1 Make sure that the total Volt Amp VA requirements of your computer monitor and peripheral equipment does not exceed 1100VA 2 Insure that the equipment plugged into the three battery power supplied outlets does not exceed the UPS unit s rated capacity 1100VA 660W for CPS1100AVR _ If rated unit capacities are exceeded an overload condition may occur and cause the UPS unit to shut down or the circuit breaker to trip 3 If the power requirements of your equipment are listed in units other than Volt Amps VA convert Watts W or Amps A into VA by doing the calculations below Note The below equation only calculates the maximum amount of VA that the equipment can use not what is typically used by the equipment at any one time Users should expect usage requirements to be approximately 60 of below value TO ESTIMATE POWER REQUIREMENTS Watts W x 2 0 VA or Amps A x 120 VA Add the totals up for all pieces of equipment and multiply this total by 6 to calculate actual requirements There are many factors that can affect the amount of power that your computer system will require The total load that you will be placing on the battery powered outlets should not exceed 80 of the unit s capacity INSPECTION The box should contain the following 1 PowerPanel Plus software floppy disk 1 serial interface cable DB 9
12. ctly to death personal injury or severe physical or property damage or that would affect operation or safety of any medical or life support device collectively High Risk Activities CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities CyberPower does not authorize use of any of its products use in any High Risk Activities ANY SUCH USE IS IMPROPER AND IS A MISUSE OF CYBERPOWER PRODUCTS The Limited Warranty and the Power Control Guarantee are governed by the laws of the United States and the State of Minnesota without reference to conflict of law principles The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded Contact Information CyberPower s address is 5555 12th Ave East Suite 110 Shakopee MN 55379 and its phone number is 952 403 9500 CyberPower is the warrantor under this Limited Warranty You may also contact CyberPower on the Internet at www cyberpowersystems com 13 FCC Notice This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communicatio
13. duct and return it to you at CyberPower s expense or if CyberPower is unable to or decides not to repair or replace the Product if defective within a reasonable time CyberPower will refund to you the full purchase price you paid for the Product purchase receipt showing price paid is required 11 CPS1100AVR Guaranteed Uninterruptible Power System POWER CONTROL GUARANTEE If you are the Initial Purchaser and the Product is still covered by the Limited Warranty the Power Control Guarantee provides protection for damage to certain equipment connected to the Product Connected Equipment subject to certain terms and limitations The Power Control Guarantee is not first dollar coverage CyberPower s obligation is reduced by any amounts that Initial Customer is entitled to recover from other sources regarding the Connected Equipment including insurance other warranty or extended warranty coverage whether or not the Initial Customer makes a claim for recovery including but not limited to a claim under any applicable insurance other warranty or extended warranty The Power Control Guarantee is separate from the Limited Warranty but they are related The Limited Warranty does not cover Connected Equipment but as is explained below to be covered under the Power Control Guarantee the Connected Equipment must have been damaged due to a failure of the Product that is covered by the Limited Warranty The Connected Equipment must
14. ed electrolyte is harmful to skin and eyes and may be toxic CAUTION A battery can present a high risk of short circuit current and electrical shock Take the following precautions before replacing the battery Remove all watches rings or other metal objects Only use tools with insulated handles Do not lay tools or metal parts on top of battery or any terminals Wear rubber gloves and boots Determine if the battery is inadvertently grounded If inadvertently grounded remove source of ground CONTACT WITH GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK The likelihood of such shock will be reduced if such grounds are removed during installation and maintenance applicable to a UPS and a remote battery supply not having a grounded circuit OS A CPS1100AVR Guaranteed Uninterru ptible Power System TO REPLACE THE BATTERY Turn off and unplug all connected equipment Turn the UPS off and unplug it from the AC power source Turn the UPS upside down Remove the 6 retaining screws Turn the UPS right side up and remove the outlet cover Remove the battery from the compartment Disconnect the battery wires from the battery Install the replacement battery by connecting the red wire to the positive terminal of the battery and connecting the black wire to the negative terminal of the battery 9 Slide the battery back into the compartment 10 Replace the outlet cover and the 6 retaining screws 11 Recharge the unit for 4 8 hou
15. end user referred to as the Initial Customer receives an express limited warranty for the CPS1100AVR referred to as the Limited Warranty purchased from CyberPower referred to as the Product The Limited Warranty is for the Product itself The terms of the Limited Warranty are explained below Power Control Guarantee CyberPower also provides the Initial Customer with protection in the event that the Product is not free from defects in materials and workmanship and certain equipment connected to the Product is damaged the Power Control Guarantee The Power Control Guarantee protects the Initial Customer for damage to equipment plugged into the Product The terms of the Power Control Guarantee are explained below The Limited Warranty and the Power Control Guarantee are subject to the terms set forth below Additionally State or Provincial law may adjust the terms of the Limited Warranty or the Power Control Guarantee or the State or Province may impose additional obligations or additional implied warranties To the extent necessary to comply with those laws the terms of the Limited Warranty and the Power Control Guarantee should be read to adjust to those requirements only to the extent necessary to comply with such local law If you are an Initial Customer you are asked to read the following terms and conditions carefully before using the Product By using the Product you consent to be bound by and become a party t
16. ete the installation For Windows 95 98 ME 1 Turn the UPS off and unplug it 2 Connect the serial interface cable to serial port on the UPS and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit Plug the UPS into an AC outlet turn the UPS on and then start your computer Windows will find new hardware Insert the PowerPanel Plus disk into the floppy drive then follow the on screen instructions When the installation is completed remove the floppy disk oe pa For Windows NT Click on Start point to Settings and then click Control Panel Double click on the UPS Icon Remove the check mark from the box labeled UPS is installed on and Click OK Acknowledge the message that the UPS is in an unknown state Exit to the desktop then shutdown your computer Turn the UPS off and unplug it Connect the serial interface cable to serial port on the UPS and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit Plug the UPS into an AC outlet turn the UPS on and then start your computer Click on Start point to Settings and then click Control Panel 10 Double click on Add Remove Programs 11 Insert the PowerPanel Plus disk into the floppy drive and then click Install 12 Follow the on screen instructions 13 When the installation is completed remove the floppy disk NOaARWONS gt
17. have been damaged due to a defect in materials or workmanship of the Product and the Product must still be covered by the Limited Warranty and the Initial Customer has made a valid claim for the Product under the Limited Warranty In the event of damage to the Connected Equipment your exclusive remedy and CyberPower s sole obligations are as follows for Connected Equipment If a the Product purchased and owned by you is defective in material or workmanship under the Limited Warranty or any applicable Implied Warranty b the Limited Warranty requirements have been met and c none of the limitations or exclusions on warranty coverage apply CyberPower will as CyberPower elects as permitted by law repair replace or pay the Agreed Damage Amount defined below for the item s of your electronic equipment directly and properly connected to the product the Connected Equipment if that Connected Equipment is x damaged by AC power line transients spikes or surges on properly installed grounded and code compliant 120 volt power lines in the United States and Canada or by transients surges or spikes on standard telephone equipment lines or Base 10 100T Ethernet lines that are properly installed and connected a Power Disturbance and y is directly plugged into and properly connected to a CyberPower Product in its original condition which is properly operated when a Power Disturbance passes through the CyberPower Product and y 1
18. he Limited Warranty and the Power Control Guarantee Do Not Apply Unless The Initial Customer 1 Has properly connected the Product and the Connected Equipment to properly wired and grounded outlets power supplies including compliance with electrical and safety codes of most current National Electrical Code ANSI NFPA 70 without the use of any adaptors extension cords or other connectors 2 Has provided a suitable and proper environment for use and installation of the Product and Connected Equipment 3 Has properly installed and operated the CyberPower Product and Connected Equipment CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following Loss of or damage to data records or software restoration of data or records or reinstallation of software 2 Damage from causes other than AC Power Line Transients spikes or surges on properly installed grounded and code compliant 120 volt power lines in the United States and Canada transients surges or spikes on standard telephone land lines PBX telephone equipment lines or Base 10 100T Ethernet lines when properly installed and connected This exclusion applies for example to fluctuations in data transmission or reception by CATV or RF transmission or fluctuations or by transients in such transmission 3 Damage from any circumstance described as excluded above with respect to the Product 4 Damages from fire flood wind rain rising water o
19. he on screen instructions 11 When the installation is completed remove the floppy disk PowerPanel Plus Icon PT start ERA My Computer 1 2 43 aM When the installation is completed the PowerPanel Plus software will appear on your screen for a few seconds and then minimize Operating Instructions PowerPanel Plus Main Menu See Figure 1 1 Log Click on the log button to open the Log Window 2 Power Click on the power button will exit the software window 3 Minimize Button software 4 Setup Click the setup button to open the Setup Window 5 Model This shows the model of the CyberPower UPS that is being used 6 Version This shows the hardware version Click this button to minimize the PowerPanel Plus Main Window Description 1 Battery Level This indicator displays the current charge on the battery The indicator will display a red color when a power failure occurs 2 Input Voltage This reading shows the current input voltage of the utility power The input normally appears in green but will turn red if the input voltage is not operating normally 3 Frequency This indicator displays the frequency of the utility power 4 Scheduled On PowerPanel Plus can be scheduled to turn your computer system on This indicator displays scheduled on settings that will occur in the next seven days 5 Final Countdown When PowerPanel Plus detects that the utility voltage is not operating n
20. he window and saves changes PS commences ueso NEETER May Sound zd Gutter On Zd Tete between power lature and ridan sec Ed Tete between power lature ad riia warring E sec ec v betey between war a 2 aj s Setup z zd hr A A A PowerPanel Plus Advanced Setup See Figure 4 1 Low Battery Voltage This sets the low battery 7 OK Exits the windows and saves changes cut off level The user can slightly extend the UPS 8 Cold Start When enabled the UPS can start in the run time by adjusting this setting absence of AC power To maximize battery life it is 2 High Voltage Failure Sets the upper level where recommended to keep this disabled the UPS will switch to battery 3 Low Voltage Failure Sets the lower level where the Figure 4 UPS will switch to battery 4 Battery Mode Output Voltage Sets the voltage that the unit will output when running on battery 5 Default Restores the settings to the factory defaults 6 Cancel Exits the window without saving changes PowerPanel Plus Schedule Menu See Figure 5 1 Special Setting This setting allows you to schedule 8 Turn Off Select the day date and time that you want a one time startup shutdown the system to shutdown This is optional to use and 2 Schedule Display This area displays the has no effect on whether your computer will shut down days dates and times of any scheduled startups and during a power failure shutdowns
21. ion to the period of ownership by the Initial Customer This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not Otherwise apply to the Product NOTE Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you 12 CPS1100AVR Guaranteed Uninterruptible Power System LIMITATION THE LIMITED WARRANTY AND THE POWER CONTROL GUARANTEE DO NOT COVER The Limited Warranty and the Power Control Guarantee are intended to exclusive rights and remedies and replace any other rights to the extent allowed by law 1 As to CyberPower products the Limited Warranty does not cover or apply to Misuse modification operation or storage outside environmental limits for the Products in transit in shipment or in storage damage or deterioration improper operation or maintenance use with items or equipment not designed or intended for use with the Product 2 As to Connected Equipment the Power Control Guarantee covers only damage within the specific terms of the Power Control Guarantee to Connected Equipment and only up to the applicable aggregate ceiling amount The Power Control Guarantee does not cover damage to Connected Equipment or apply if the product has been operated in a failure mode or not in compliance with CyberPower operating instructions and manuals and or with the instruction and manuals of its manufacturer vendor T
22. mited Warranty requirements have been met CyberPower will repair or replace the Product if it proves to be defective in material or workmanship during the Warranty Period To make a Limited Warranty claim on a Product you must do the following 1 Complete and return the CyberPower Warranty Registration Card or provide reasonable proof of purchase for example a sales receipt that establishes you as the Initial Customer the original end user consumer purchaser of the Product and prove that the Product was purchased within three y or 877 297 6937ears of the event for which you want to make a claim for warranty service 2 Call CYBERPOWER at 952 403 9500 write to CYBERPOWER at 5555 12 Avenue East Suite 110 Shakopee MN 55379 or E Mail CYBERPOWER at tech cyberpowersystems com within ten 10 days of the event for which you want to make a claim for warranty service 3 When you call write or E Mail identify the Product the Purchase Date and request Return Material Authorization information from CyberPower 4 Pack and ship the Product to CyberPower as instructed in your Return Material Authorization Show the Return Material Authorization code on the shipping label or include it with the Product You must prepay all shipping costs and you are responsible for packaging and shipment CyberPower will inspect and examine the Product within ten 10 days of receipt If the Product is not as warranted CyberPower will repair or replace the Pro
23. ns However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help Any special accessories needed for compliance must be specified in the instruction CAUTION A shielded type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception Itis essential that only the supplied power cord be used Use only shielded cables to connect 1 O devices to this equipment CAUTION Any changes or modifications not expressly approved by the guarantee of this device could void the user s authority to operate the CyberPower equipment For more information contact us at CyberPower systems USA Inc 5555 12 Avenue East Suite 110 Shakopee MN 55379 Toll Free 877 297 6937 Tel 952 403 9500 Fax 952 403 0009 Email information cyberpowersystems com Web www cyberpowersystems com Entire content copyrigh
24. o the Limited Warranty and Power Control Guarantee If you do not agree to the terms and conditions of the Limited Warranty and Power Control Guarantee you should return the Product for a full refund prior to using it REGISTRATION CyberPower requests that you complete and return the Warranty Registration Card enclosed with the Product or register the Product at its website www cyberpowersystems com prodreg to establish that you are the original end user consumer purchaser of the Product and therefore entitled coverage under the Limited Warranty and the Power Control Guarantee Registration is not required for Limited Warranty coverage but note if you do not complete a registration card you will be required to provide proof of purchase as described below to have the benefits of this Limited Warranty LIMITED WARRANTY CyberPower warrants to you the Initial Purchaser that the Product will be free from defects in material and workmanship for three years from the date of original purchase subject to the terms of this Limited Warranty To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty Your exclusive remedy and CyberPowers sole obligations are as follows for the Product If a the CyberPower Product you purchased and still own is defective in material or workmanship under this Limited Warranty or any applicable warranty imposed by law and b all Li
25. ormally the final countdown will begin When the countdown reaches zero PowerPanel Plus will save and close any open files and then shut down the operating system in an intelligent and orderly manner 6 Approximate Backup Time This indicator shows the approximate amount of backup time that is available based upon the battery capacity and the load on the system This indicator can appear in red yellow or PowerPanel Plus Setup Window See Figure 3 1 UPS is Installed On This shows the current port that the UPS is using The port assigned to the UPS needs to be used exclusively for the PowerPanel software 2 Buzzer On This toggles the audible alarm on and off 3 Play Sound Voice is being played when the UPS is turning on or facing a power outage 5 Time between Power Failure and Initial Warning This setting determines the delay between when the power fails and the first audible alarm 6 Delay between Warning Messages User adjustable setting for the delay between the audible alarms that occur during a power failure It will appear as a blue and white battery icon located in the system tray near the clock 7 Status Bar The area display messages about the status of the software 8 Schedule Click this button to open the Schedule Window 1 Figure 1 See Figure 2 green depending upon the number of minutes available 7 Scheduled Off PowerPanel Plus can be set to automatically shutdown
26. r Battery section of this manual provides circuit overload and fault protection 11 Serial Port to PC Under normal operating conditions the circuit This port allows connection and breaker is depressed communication from the DB 9 serial or USB port 5 Power Switch on the computer to the UPS unit The UPS Can be used as the master on off switch for communicates its status to the PowerPanel computer equipment connected to the battery power Plus software This interface is also supplied outlets compatible with the UPS service provided by 6 Power On Indicator Windows NT Windows 2000 and Windows XP This LED is illuminated when the utility condition is 12 Communication Protection Ports normal and the UPS outlets are providing clean Communication protection ports will protect any power free of surges and spikes standard modem fax or telephone line CPS1100AVR Guaranteed Uninterruptible Power System HARDWARE INSTALLATION GUIDE 1 Your new UPS may be used immediately upon receipt However recharging the battery for at least four hours is recommended to i PH In insure that the battery s maximum charge capacity is achieved rot 7 Charge loss may occur during shipping and storage To recharge ei the battery simply leave the unit plugged into an AC outlet The unit will charge in both the on as well as the off position Circuit Breaker 2 If you wish to use the software connect either the enclosed serial
27. r leakage or breakage of plumbing from abuse misuse or alteration of either the Product or the Connected Equipment Exclusion of Consequential and Other Damages The sole and exclusive remedies of the Initial Customer are those provided by the Limited Warranty and Power Control Guarantee CyberPower excludes any liability for personal injury under the Limited Warranty and Power Control Guarantee CyberPower excludes any liability for direct indirect special incidental or consequential damages whether for damage to or loss of property loss of profits business interruption loss of information or data EXCEPT FOR AND ONLY FOR the specific limited agreement of CYBERPOWER to provide certain warranty benefits regarding Connected Equipment under the CYBERPOWER Power Control Guarantee NOTE Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you DO NOT USE FOR MEDICAL OR LIFE SUPPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES CyberPower does not sell the Products for use in high risk activities The Product is not designed or intended for use in hazardous environments requiring fail safe performance including the operation of nuclear facilities aircraft navigation or communication systems air traffic control weapons systems life support or medical applications or for use in any circumstance in which the failure of the Product could lead dire
28. ranty Circuit Breaker 6 Depress the power switch to turn the unit on The power on indicator light will illuminate T If an overload is detected an audible alarm will sound and the unit will emit one long beep To correct this turn the UPS off and unplug at least one piece of equipment from the battery power supplied outlets Wait 10 seconds Make sure the circuit breaker is depressed and then turn the UPS on 8 Your UPS is equipped with an auto charge feature When the UPS is plugged into an AC outlet the battery will automatically recharge 9 To maintain optimal battery charge leave the UPS plugged into an AC outlet at all times 10 To store your UPS for an extended period cover it and store with the battery fully charged Recharge the battery every three months to insure battery life POWERPANEL PLUS SOFTWARE INSTALLATION GUIDE Overview PowerPanel Plus version 2 1 4 or greater is designed for use with Windows 95 Windows 98 Windows Me Windows NT Windows 2000 and Windows XP The latest version can be downloaded from www cyberpowersystems com downloads htm It works in conjunction with the UPS to provide full protection of valuable computer systems applications and data In the event of a power failure PowerPanel Plus automatically saves and closes open files under auto assigned file names or existing files names after software controlled delay The computer and UPS are automatically shutdown to conserve bat
29. rs to ensure the UPS performs expected runtime REMINDER Batteries are consider HAZARDOUS WASTE and must be disposed properly Contact your local government for more information about proper disposal and recycling of batteries Co Cho CPS1100AVR Guaranteed Uninterruptible Power System DEFINITIONS FOR ILLUMINATED LED INDICATORS Power Wiring i Circuit Condition On Fault Breaker ff AVR AVR is maintaining a consistent 120v level 5 a a a a during a power sag ON Of Of Of Set Off AVR AVR is ee a consistent 120v o during a power surge On Off Off Off Set oe Utility Failure The UPS is providing battery p power to the Battery Power Supplied outlets Rapid Utility Failure The UPS is providing battery omen ot Sel Beeps power The rapid beeps indicate the battery will run out of charge within a few minutes Two Off Off Overload Occurs in the Full time Surge Of Of off Protection Outlets l Turn the UPS off and unplug at least one piece of equipment from the UPS Wait 5 seconds reset the circuit Off Off breaker and tum the UPS on Overload Occurs in the Battery power off Supplied Outlets Turn the UPS off and unplug at least one piece of equipment from the UPS Wait 5 seconds reset the circuit breaker and tum the UPS on beeps or rapid beeps Ea On Off On Off Overload Occurs in the Battery power Supplied Outlets Turn the UPS off and unplug at least one piece of equipment from the UPS Wai
30. t 2003 CyberPower Systems Inc All rights reserved Reproduction in whole or in part without permission is prohibited PowerPanel Plus is a trademark of CyberPower Systems USA Inc KO1 1100A0A
31. t 5 seconds reset the circuit breaker and tum the UPS on Weak Battery Recharge the battery for at least 8 hours If Check Battery is illuminated contact CyberPower Systems for battery replacement information Surge Protection Malfunction Lightning induced power line surge has damaged the surge protect function Please contact CyberPower Systems Scheduled Turn on If the two battery indicators are flashing in rotation the UPS is waiting to tum on as configured in the schedule Cold Start Disabled If the two battery indicators are flashing at the same time the cae mest cold start has been disabled The UPS will not start in the absence of AC power Electrical Wiring Fault This indicates a wiring a problem such as a bad ground missed ground or reversed wiring within the AC omer ee SEVUp outlet User is advised to disconnect all electrical equipment from the outlet and have the outlet checked by an electrician Sample Systems Desktop PC with LCD Monitor 62 82 Desktop PC with 15 Monitor 57 70 E Q afaa ea ee gt Desktop PC with 17 Monitor 50 58 Desktop PC with 21 Monitor 40 48 CPS1100AVR Guaranteed Uninterruptible Power System TROUBLESHOOTING Problem Possible Cause Full time surge protection Circuit breaker has tripped Turn the UPS off and unplug at least one piece of equipment outlets stop providing power due to an overload Wait 10 seconds reset the circuit breaker by depressing the
32. tery power Files with auto assigned names will be saved under C PCTemp where C is the name of your main hard drive Files that have previously been saved will be saved in their original location CPS1100AVR Guaranteed Uninterruptible Power System PowerPanel Plus is equipped with a Scheduled Shutdown feature that can automatically save and close open files and then shutdown the computer and UPS at a user specified date and time as well as start the computer at a user specified date and time Use of this feature is optional and is not required for the power failure shutdown to occur The use of the PowerPanel Plus software is optional The UPS unit will provide full surge suppression and battery backup without the software You must use the software if you wish to have the automatic shutdown feature Installation Guide Cyber Power UPS can provide surge suppression and battery backup without the software However if you need to schedule for UPS Auto shutdown then it is necessary to install the software USB Function Optional 1 Turn off your UPS 2 Connect the serial interface cable to your UPS and the open serial port on the rear panel of the computer If you would like to use USB interface please connect the USB adapter with the Serial Cable then connect the USB to your computer See the figure 3 Plug the UPS into an AC outlet turn the UPS on and start your computer 4 Follow the instructions on the User s Manual to compl
33. the computer system at a user specified time scheduled off settings that are set to occur within seven days will be displayed 8 Temperature This indicator displays the internal operating temperature of the unit If the temperature exceeds 158 F 70 C the indicator will change from green to red 9 Load Level This indicator shows the of capacity of the battery outlets that is currently being used This indicator appears in green or gray but will turn red if the load exceed 90 10 Output Voltage This indicator shows the voltage of the UPS output 4 Time between Power Failure and Shutdown This is the user controllable delay between when the power fails and the software starts the shutdown process If unchecked the unit will run on battery until the low battery signal is received 2 minutes of backup time remaining and then start the shutdown process 7 UPS Self Test Allows the user to test the UPS without having to unplug the unit from the wall When Run is clicked the unit will switch to battery power and the unit will beep CPS1100AVR Guaranteed Uninterruptible Power System 8 About This button will display information about the software as well as contact information 9 Advance This button opens the Advanced Setup Window 10 Default Click this button to return the software to original factory settings 11 Cancel This button exits the window without saving changes 12 OK This button exits t
34. turn it back on You may then restart your computer Please allow 4 hours for the UPS to recharge before attempting another self test If you are not using PowerPanel Plus Have your computer and UPS turned on Unplug the UPS from the wall to simulate a power failure The UPS will begin beeping indicating a power failure Save and close any open files Shut down the operating system Once the computer system is shutdown turn the UPS off As the battery discharges the unit will beep more rapidly indicating that the battery is nearing discharge Once the test is complete plug the UPS back in to the AC outlet and start your computer Please allow 4 hours for the UPS to recharge before attempting another self test OO oN REPLACING THE BATTERY Contact your dealer or call the number in this manual for information on battery replacement The order numbers for the battery are as follows BA CPS1100AVR for CPS1100AVR CAUTION Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery Service the battery under the supervision of personnel knowledgeable of batteries and their precautions CAUTION Use only the specified type of battery See your dealer for replacement batteries CAUTION The battery may present risk of electrical shock Do not dispose of battery in a fire as it may explode Follow all local ordinances regarding proper disposal of batteries CAUTION Do not open or mutilate the batteries Releas
35. uthorization information from CyberPower 4 Pack and ship the Product to CyberPower and if requested by CyberPower the item s of Connected Equipment a repair cost estimate for the damage to the Connected Equipment and or a written statement of how the damage occurred as instructed in your Return Material Authorization Show the Return Material Authorization code on the shipping label or include it with the Product Initial Customer shall prepay all shipping costs and is responsible for packaging and shipment CyberPower will inspect and examine the Product and the item s of Connected Equipment or at CyberPower s election your written statement and repair cost estimate for those item s You must return the product for inspection If the Product is warranted under the Limited Warranty and the damage to Connected Equipment is covered by the Power Control Guarantee CyberPower will in addition to Limited Warranty remedies for the CyberPower Product itself repair or pay the costs of repair or replace the Connected Equipment or at the option of CyberPower as permitted by law pay to the Initial Customer the Agreed Damage Amount up to the aggregate limits stated below for all item s of Initial Customer s Connected Equipment The Agreed Damage Amount for all items of Initial Customer s Connected Equipment shall be the lesser of the amount determined under Clause 1 or 2 below reduced by any amounts described in Clause 3 belo
36. w 1 The fair market value of the Connected Equipment as established by the lower of a the price list of Orion Bluebook or if such price list is no longer published a published or announced price list reasonably selected by CyberPower or b the lowest price the Connected Equipment can be purchased for in the United States or 2 The aggregate ceiling amount for all Connected Equipment as set forth below minus 3 The amount s of all payment s you have or are entitled to receive from insurance other warranties extended warranties or from other sources or persons for the Connected Equipment or damage to such equipment so that CyberPower s maximum liability shall be reduced to reflect all such other payments or sources of recovery CyberPower CPS1100AVR 350 000 00 4 If CyberPower replaces the Connected Equipment or pays to the Initial Customer the Agreed Damage Amount the Initial Customer shall transfer such item s to CyberPower without warranty by the Initial Customer but free of lien or other interest CONDITIONS COMMON TO THE LIMITED WARRANTY AND THE POWER CONTROL GUARANTEE The Limited Warranty and the Power Control Guarantee are the only and the exclusive express warranty of CyberPower with respect to the Product This exclusion of other express warranties applies to written and oral express warranties Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose if applicable to the Product is limited in durat
Download Pdf Manuals
Related Search