Cineo Maverick User Guide.indd
Contents
1. Maverick User Guide Revision 1 1 November 2014 Information and specifications in this document are subject to change without notice www cineolighting com Maverick Welcome to Cineo Maverick Cineo Lighting has developed the versatile Cineo Maverick Remote Phosphor light source Maverick operates from many power options including AC DC and battery power The power connection uses an industry standard XLR4 connector with an input voltage range of 10 8 to 28 VDC Like all Cineo soft lights Maverick allows the user to change the Remote Phosphor panels supporting CCT of 2700K 3200K 4300K 5600K 6500K Chroma Blue and Green Their color quality perfectly matches all other Cineo soft lights with CRI ratings of 90 98 depending on color temperature Maverick fixtures feature a versatile mounting system that supports industry standard hardware for virtually limitless mounting options Rather than traditional diffusion to soften the light source the light actually emits from the Remote Phosphor panels on the front of the fixture providing a light characteristic that radiates equally in a 160 radius providing Maverick the ability to wrap your subject with soft light with edgeless shadows The phosphor panels are excited by blue LEDs which are automatically turned off when the phosphor panels are removed The color temperature of Maverick is extremely consistent fixture to fixture and will not change over2. The Maverick lamphead represents the next generation of Remote Phosphor professional lighting Incorporating simple operation advanced passive cooling and versatile configuration options Local 0 100 dimming is facilitated with a simple rotary control while adding the DMX module provides remote control of the fixture Maverick can be configured to run on battery DC or AC power sources Maverick typically includes a mounting yoke that can be easily removed from the industry standard 80 20 profile mounting slot The 80 20 slot also accommodates additional mounting options from both Cineo Lighting and others The fixture can be operated in inclement weather conditions and although not completely waterproof it can withstand moderately wet conditions Depending on input power and CCT Maverick can output up to 8 000 lumens from a very compact form factor er ee hag ae sods 12 24 VDC AUX LINK Maverick Power Sources The Maverick fixture features SmartPower power control allowing operation with any 12 24VDC power source capable of delivering 75 150 watts This provides compatibility with a wide range of battery and AC options Configuration of SmartPower is covered in detail in the Advanced Power Setting section of this guide Cineo offers the following power accessories for mounting on the either the Maverick yoke or BackPak accessory bracket Maverick can be used with virtually any nominal 12 24VDC power source including c
3. mounting tool for one or two battery plates or a battery plate and a 120 watt portable AC adapter To remove install the yoke 1 Position the yoke 90 to the body of the fixture 2 With a 2 Phillips screwdriver loosen the 4 mounting screws approximately one revolution 3 Slide yoke out of 80 20 slot 4 Installation is in reverse order To install remove the BackPak 1 Align the attached oval shaped nuts at the top of the BackPak to the top of the 80 20 slot 2 Slide the top of the BackPak down so the oval nuts on the bottom can be inserted Into the bottom of the 80 20 slot 3 Position the BackPak in the desired location 4 Tighten the 2 Phillips screws to secure the BackPak bracket Specifications Lamphead Input voltage 10 5 28 VDC Power consumption 75 watts 120 watts 135 watts user configurable 4 pin XLR power input EtherCon DMX port Completely silent flicker free operation Fixture dimensions 9 4 x 7 3 x 3 240mm x 186mm x 78mm Weight 2 2 kg 4 9 Ibs Maximum output 8 000 lumens Beam Angle gt 160 Max temperature rise 45 C above ambient Environmental temperature range 20 50 C 35 000 hr L70 rated 2 year parts and labor warranty ETL and cETL pending CE Compliant Zero UV light emitted Made in USA Maverick Power Sources 120w AC Adapter Part 900 0095 Input Voltage 100 240VAC Output Voltage 24VDC Max output current bA Output connector XLR4 Dimen
4. to lock the setting If the setting is not saved it will revert to its previous setting in a few seconds When the arrow Is pointing to the Address mode the and buttons will increase or decrease the DMX address setting to the desired address When the desired address is displayed touch the Save button to lock the setting If the setting is not saved it will revert to its previous setting in a few seconds Disconnecting the DMX module from the Maverick fixture will place the fixture back into local control Remote Phosphor Panels Color temperature CCT for the Maverick is changed by replacing the Remote Phosphor panel on the front of the fixture The CCT is clearly labeled on each panel To change RP panels 1 Loosen the two thumbscrews at the top of the fixture and remove the top plate The top plate is tethered to the body of the fixture to avoid loss or damage JUALIN r r I 13 2400 Rk _ 2 Remove the RP panel by sliding it up and out of the fixture If the lamp is on the output will be cut when the panel is removed 3 Insert a new panel into the slots and firmly seat it into the bottom of the slot If power is applied the lamp will turn on 4 Replace the top plate tightening the two thumbscrews finger tight Although no harmful UV emanates from the fixture Maverick should only be used with the remote phosphor panels in place Although the panels are extremel
5. N OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE CINEO LIGHTING EXPRESSLY DISCLAIMS ANY WARRANTIES NOT STATED HEREIN NO LIABILITY FOR CONSEQUENTIAL DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL ELEMENT AND ITS LICENSORS DISTRIBUTORS AND SUPPLIERS INCLUDING ITS AND THEIR DIRECTORS OFFICERS EMPLOYEES AND AGENTS BE LIABLE FOR ANY DAMAGES INCLUDING BUT NOT LIMITED TO ANY SPECIAL DIRECT INDIRECT INCIDENTAL EXEMPLARY OR CONSEQUENTIAL DAMAGES EXPENSES LOST PROFITS INSTALLATION COSTS LOST SAVINGS BUSINESS INTERRUPTION LOST BUSINESS INFORMATION OR ANY OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCTS EVEN IF ELEMENT OR ITS LICENSORS DISTRIBUTORS AND SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES CINEO LIGHTING S TOTAL LIABILITY ON ALL CLAIMS WHETHER IN CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR BREACH OF STATUTORY DUTY STRICT LIABILITY OR OTHERWISE SHALL NOT EXCEED THE AMOUNTS PAID BY CUSTOMER FOR THE PRODUCTS Customer acknowledges that the applicable purchase price or license fee for the Products reflects this allocation of risk Because some states jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages the above limitation may not apply The above limitations shall apply notwithstanding the failure of any limited remedy to fulfill its essential purpose Maverick Specifications are sub
6. ak accessory and connects to the Maverick fixture s AUX port via an included RJ45 cable The module includes both DMX IN and DMX THRU via standard 5 pin XLR connections The DMX pin out wiring is as follows e Pin 1 Signal Common e Pin 2 Data e Pin 3 Data e Pin 4 Spare e Pin 5 Spare y The DMX control line is automatically self terminating and does not require external DMX termination when no cable is inserted into the DMX THRU connector Note that when the DMX control is in use and DMX control signal is lost the fixture will hold its last level When the Maverick loses power it retains all of its DMX settings when power is resumed DMX Module Operation When the DMX module is connected to the Maverick fixture control of the fixture is automatically switched to the module The DMX module has a multi line display screen that indicates the firmware level control mode local remote and DMX address The module is programmed by the use of four capacitive touch buttons below the screen Mode Save There are two control modes one for determining local or DMX control and one for setting the DMX address 0 255 Touching the Mode button toggles the arrow on the right of the screen between these modes When the arrow is pointing to the Control setting the and buttons will switch between local and DMX control When the desired control method is displayed touch the Save button
7. amera batteries car lighter sockets etc Adapters and accessory cables are sold for connection to various power sources including the following 900 0095 120w portable AC Adapter 900 0195 150w studio power supply 900 0086 V Lock Battery Plate 900 0094 Gold Mount Plate 903 0003 Maverick Cigar Lighter Cable Inout power from other sources is also possible using an XLR4 connector with the following pin configuration e Pind GND e Pin2 NC e Ping NC e Pin4d VDC Advanced Power Settings SmartPower settings are configured on a set of DIP switches located inside the lamphead By placing these switches inside the fixture misuse of various power configurations is minimized as the fixture should be set up with the power sources intended for use In mind To access the switches you must remove the lower panel from the lamphead Two large screws must be removed plus two smaller screws as shown in the following photo The two small switches are located as shown and can be depressed or lifted using a small pin The simplest way to think about the SmartPower settings Is to consider the maximum power capability of your DC source below 18 VDC Low Voltage setting and the option of limiting of power draw at a nominal 24VDC High Voltage setting Low Voltage setting LV A standard capacity V Lock or Gold Mount camera battery will draw 70 95 watts with an output voltage ranging from 10 5 to 16 VDC A high capaci
8. ject to change without notice Cineo Lighting Cineo Maverick and Maverick are registered trademarks of Cineo Lighting Inc 2014 Cineo Lighting Inc v11 06 14 Cineo Lighting P O Box 808 El Granada CA 94018 CIN E O L G H T N G Silicon Valley Los Angeles London info cineolighting com 1 310 425 3425 www cineolighting com
9. o Lighting before returning any Products under warranty to Cineo Lighting Customer shall pay expenses for shipment of repaired or replacement Products to Cineo Lighting s repair facility Any repaired or replaced Products will be warranted for the remainder of the original warranty period or thirty 80 days whichever is longer Cineo Lighting will pay shipping of repaired goods back to the customer After examining and testing a returned product if Cineo Lighting concludes that a returned product is not detective Customer will be notified the product returned at Customer s expense This Limited Warranty is void if failure of the Products has resulted from accident abuse misapplication or use outside of normal operating conditions Warranty is void if serial number has been defaced or removed NO OTHER WARRANTIES EXCEPT AS EXPRESSLY SET FORTH ABOVE THE PRODUCTS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND AND NO OTHER WARRANTIES EITHER EXPRESSED OR IMPLIED ARE MADE WITH RESPECT TO THE PRODUCTS INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE TITLE OR NON INFRINGEMENT OR ANY OTHER WARRANTIES THAT MAY ARISE FROM USAGE OF TRADE OR COURSE OF DEALING ELEMENT DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF OR THE RESULTS OF THE USE OF THE PRODUCTS IN TERMS OF CORRECTNESS ACCURACY RELIABILITY OR OTHERWISE AND DOES NOT WARRANT THAT THE OPERATIO
10. pter capable of operating from 90 240 VAC with a 24VDC output of 120 watts The mounting bracket for this AC adapter is designed for quick removal of the adapter from the fi xture when minimum weight is a factor Note the location of switch closest to the bottom of the fixture which controls the HV setting labeled Option B To set the fixture for 120 watt operation at 24 VDC the switch position should be DOWN The Yellow LED on the back of the fixture will illuminate indicating the 120 watt mode is selected This is the default mode when the fixture is shipped from the factory When the position of this switch is UP the fixture is running at 135 watts In this mode the fixture MUST be powered with a 150 watt or greater power source or damage to the power source may occur Local and Remote Dimming When correct DC power is applied to the unit the green LED illuminates on the back between the cooling fins The output of the Maverick is controlled with the local control knob on the back of the fixture The fixture does not employ an on off switch when the knob position is at O the fixture is virtually off as it draws only 10 ma of power The dimming curve is logarithmic in nature providing a very analog characteristic to its control Remote Dimming via DMX Cineo offers a DMX interface module for control of the fixture via standard DMX lighting protocol The interface module 900 0087 attaches to either the yoke or the BackP
11. roper ventilation must be provided ESD and LED s LED components used in Maverick are ESD Electro Static Discharge sensitive To prevent the possibility of destroying LED components do not touch either while the fixture Is in operation or while it is switched off Blue Light Output Do not bypass the lamphead safety switches that turn off the blue LEDs when phosphor panels are removed The light output intensity may be harmful to human eyes No UV or IR is emitted at any time from this fixture AC Power Supplies and DC Cables Use only a rated AC power supply The user is responsible for ensuring DC power cables are of adequate condition for each application If the cables are damaged replace them with new ones Environmental Disposal of Old Electrical amp Electronic Equipment This product shall not be treated as household waste CINEO LIGHTING LIMITED WARRANTY Products trom Cineo Lighting are warranted against defects in materials and workmanship for two years from the date the Product is shipped to Customer Products are guaranteed to perform substantially in accordance with the accompanying written materials within the warranty period under normal use If the Product fails to work as warranted Cineo Lighting will in its sole discretion repair or replace the Product with a new or remanufactured Product that is at least equivalent to the original Product Customer must obtain a Return Material Authorization number from Cine
12. sions 6 61 x 2 8 x 1 48 168mm x 71mm x 37 2MM Weight 1 5 lb 680 39 2 year parts and labor warranty UL cULus and CE listed 150w AC Adapter Part 900 0195 Input Voltage 100 240VAC Output Voltage 24VDC Max output current 6 25A Output connector XLR4 Dimensions 6 5 x 3 25 x 1 58 165 1mm x 82 8mm x 40 1mm Weight 2 25 Ib 1 0 kg 2 year parts and labor warranty UL cULus and CE listed Input Voltage 100 240VAC Output Voltage 24VDC 6 25A 900 0086 V Lock Battery Plate Max output current 10A Output connector XLR4 Dimensions 5 6 x 3 2 x 1 142 1mm x 82 3mm x 26 3MM Weight 13 oz 368 5 g 900 0094 Gold Mount Plate Max output current 10A Output connector XLR4 Dimensions 4 7 x 3 9 x 1 7 119 6mm x 76 5mm x 17 8mm Weight 9 2 oz 260 8 g 903 0003 Car Lighter Cable Length 10 ft Max output current 10A Output connector XLR4 DMX Interface Module Interface connector Ethercon F DMX connectors XLR5 IN THRU self terminating Dimensions 3 0 x 3 9 x 1 7 77 2mm x 99mm x 43 7mm Weight 7 3 oz 207 g Warnings Disclaimers and Warranty Burning Injuries Be aware of high temperatures in excess of 50 C inside the lamphead during and after fixture use To avoid burning injuries do not touch the LEDs Flammable Materials Keep tlammable materials away from the installation Ensure that the amount of air flow required for sate operation of the equipment is not compromised P
13. time like other lighting technologies Cineo Maverick fixtures are extremely durable built to last with anodized alloy construction flexible polycarbonate panels and field serviceable components Dimming options include both local and DMX control Cineo Maverick is perfect for any film or television project in the studio or on location or anywhere flicker free color accurate soft light is required General Notes 1 Please read through this manual carefully before operating Cineo Maverick and keep this manual for future reference 2 There are numerous safety instructions and warnings that must be adhered to for your own safety Maverick is not intended for residential use It is intended for use in a professional studio Maverick service must be performed by a qualified technician Although Maverick is weather resistant the fixture is intended primarily for indoor use Cineo products are not certified for use in hazardous locations NY O OF A O Maverick has a typical operating temperature of 120 F 50 C Fixture Set Up 1 Read these safety instructions carefully to ensure fixture and accessories are used safely 2 It is suggested that the fixture is correctly mounted onto the supporting surface before use 3 Ensure the Maverick and power sources are operated within an ambient temperature range of 4 to 122 F 20 to 50 C System Components Connections and Controls Maverick Lamphead
14. ty camera battery typically has a 120 150 watt output with a similar output voltage range If the Maverick is being used with standard capacity batteries the LV setting should be set to 75 watts if the fixture will only be used with high capacity batteries the LV setting can be set to 120 watts Note that if the LV setting is 75 watts virtually any capacity camera battery will work well with Maverick without damage to the battery Note the location of the switch labeled Option A which controls the LV setting When depressed the LV mode is set to 75 watts This is indicated on the back of the fixture by illuminating the Red LED This is the default setting when the fixture is shipped from the factory When in the UP position the LV mode Is set to 120 watts and the Red LED on the back of the fixture Is OFF Use of the 120 watt LV setting should ONLY be used with batteries whose output equals or 12V Status on 75W exceeds 120 watts A standard capacity battery off 120W will exhibit very little run time and risk battery 24V Status on 120W damage if operating a Maverick with the LV off 135W setting at 120 watts Power High Voltage setting HV The Maverick fi xture is designed for use with a 24VDC AC adapter when used on house power The HV switch allows the fi xture to be confi gured for use at 120 watts or up to 135 watts depending on the application For portable use Cineo provides a small lightweight AC ada
15. y durable avoid exposing them to abrasive surfaces Please reference the Cineo Maverick catalogue for available color temperature options Mounting and Accessory Attachment Maverick has an integrated slot in front of the RP panel for attachment of light control accessories including the following 900 0088 90 Louver 900 0089 4 leaf Barndoor set 902 0100 Snapbag softbox 902 0101 Chimera softbox To install a light control accessory in the slot 1 Rotate the accessory lock to the open position 2 Slide the accessory frame into the slot 3 Rotate the accessory lock to the closed position Maverick also features two industry standard 80 20 profile slots running vertically along the sides of the fixture Not only do these provide an easy way to attach detach and vertically position the yoke to the lamphead It provides a universal mounting solution for other accessories including handles frames and Cineo s BackPak accessory bracket Additionally all Cineo Maverick accessories battery plates AC adapters DMX adapters etc conform to a standard mounting hole pattern that Is repeated on the BackPak and several locations on the yoke This allows your Maverick unit to be configured optimally for the application For example a studio lighting installation is best configured with the 150 watt power supply and DMX adapter attached to opposite sides of the yoke For portable applications the BackPak Is an ideal
Download Pdf Manuals
Related Search