Philips 32PFL3406H Tv User Guide Manual Operating Instructions Pdf
Contents
1. English Remote control 7 Mute Mute or restore audio Volume e Adjust volume 0 9 Numeric buttons Select channels SUBTITLE Enable or disable subtitles 1 TEXT Enable or disable teletext 2 OPTIONS e Access options for the current activity or selection 3 Back e Return to the previous menu or exit a function OK Confirm an entry or selection A lt gt Navigation buttons e Navigate through menus and select items ttt ADJUST e Access the menu to adjust settings PHILIPS Colour buttons Select tasks or options 1 Standby On e Switch the TV on or to standby Play buttons Control video or music a FIND Access the menu to select a TV channel list 2 ft Home Access the home menu 5 I4 CH CH Previous Next Switch channels or navigate through menu pages tracks albums or folders 6 3 SOURCE Select connected devices Dowhlod amp hd From TV Manual com Manuals Remote control usage When you use the remote control hold it close the TV and point it at the remote control sensor Make sure that the line of sight between he remote control and TV is not blocked by furniture walls or other objects xxPFL5xx6 xxPFL4xx6 5m 30 xxPFL3xx6 DesignLine2. Automatically install channels You can search and store channels automatically Note f you have not set the child lock code you may be prompted to set the code see Set or change code on page 22 Step 1 Select your menu language 1 Press ft 2 Select Setup gt TV settings gt Preferences gt Menu language then press OK J selecta language then press OK Step 2 Search for channels When the TV was switched on for the first time a full installation of channels was performed You can run this full installation again to set your language country and install all available TV channels Note For selected models some options are different Downloaded From TV Manual com Manuals Press fft Select Setup gt Search for channels then press OK N Select Reinstall channels then press OK L gt The country menu is displayed 4 Selec your country then press OK L gt The network menu is displayed 5 Select the network then press OK e Antenna For free to air antenna or digital DVB T channels e Cable For cable or digital DVB C channels 6 Follow the onscreen instructions to select other options if any L gt The start menu for channel search is displayed 7 Select Start then press OK L gt All available channels are stored 8 To exit press OK Update the channel list You can enable automatic update of channels
3. Press OPTIONS L gt The channel options menu is displayed Select Rename channel then press OK To display the text input box press OK For each character select a character then press OK e To select uppercase letters lowercase letters or symbols In the row below the space key select the respective key then press OK When complete select Done then press OK L gt The text input box closes In the rename channel menu select Done then press OK Rearrange channels After you install channels you can rearrange the order in which they appear 1 2 A While you watch TV press FIND L gt The channel matrix menu is displayed Press OPTIONS L gt The channel options menu appears Select Reorder then press OK Select the channel to rearrange then press OK L gt The selected channel is highlighted Move the highlighted channel to its new location then press OK Press OPTIONS Select Done reordering then press OK Downloaded From TV Manual com Manuals Hide channels To prevent unauthorised access to channels hide them from the channel list 1 Wh Ly ile you watch TV press Q FIND The channel matrix menu is displayed Select the channel to hide Ly 2 3 Press OPTIONS 4 The channel options menu is displayed Select Hide channel then press OK Ly The channel is marked as hidden Unhide channels nt
4. Remote control e 11 e Batteries 2 x AAA LRO3 type Power Mains power 220 240V 50 60Hz Standby power For xxPFL5xx6 lt 0 15 W For xxPFL4xx6 xxPFL3xx6 and DesignLine Tilt lt 0 3 W e Ambient temperature 5 to 40 degrees Celsius For power consumption see the product specifications at www philips com support The power rating stated on the product typeplate is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 Supported TV mounts To mount the TV purchase a Philips TV mount or a compatible TV mount Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage Before you mount perform these steps 1 prevent damage to cables and connectors leave a clearance of at least 2 2 inches or 5 5cm from the back of the TV 2 For selected models remove the wall mount plugs from the back of the TV 3 Make sure that your mounting bolts follow these specifications TV screen Required Required mounting size pitch bolts inches 47 400 x 300 4x 8 10 mm 46 400 x 400 4xM6 11 12 mm 42 300 x 200 4 6 10 mm 40 400 x 400 4 M6 11 12 mm 37 30
5. Step 3 Update the TV software Connect your USB storage device to the TV L gt TheTV detects the USB flash drive and starts to scan for software version 2 message prompts you to update the software follow the on screen instructions to update the TV software If the message 15 not displayed continue with the following steps Press fft Select Setup gt Software settings gt Local updates OR UJ Select the file that you downloaded then press OK to update the TV software manually N Follow the on screen instructions to complete the update 8 To exit press d Update when prompted through digital broadcasts If you receive digital broadcasts DVB T your TV can automatically receive software updates When your TV receives a software update it will prompt you to update the TV software Press ff 2 Select Setup gt Software settings gt Announcement 3 f a message appears to prompt you o update your software follow the instructions to start the update L gt The TV restarts after the software update is complete 4 f you not want to update the software select Setup gt Software settings gt Clear announcement then press OK Note f you skip the update you can update it manually later see Check for updates through digital broadcasts on page 27 C Check for updates through digital broadcasts You can check if
6. To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never he cord Ensure that you have full access o the power plug power cord and outlet socket at all times of short circuit or fire ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times ever expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg or 55 Ibs When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall hat can support the combined weight of he TV and wall mount Koninklijke Philips El
7. aucun aper u n est disponible HR HU KK LV LT NL NO PL PT RO Dodatak Kada odaberete kanal s mreze kanala pretpregled se ne prikazuje F ggel k mikor kijel l egy csatorn t a csatorn k t bl zat ban nem jelenik meg el n zeti k p Integrazione Quando si seleziona un canale dalla relativa griglia l anteprima non viene visualizzata Pielikums Kad izv laties kanalu kanalu tikla priek skat jums netiek rad ts Priedas Renkantis kanal i kanal tinklelio per i ra nerodoma Addendum Wanneer u een zender selecteert in de zenderlijst krijgt u geen voorbeeld te zien Addendum N r du velger en kanal fra kanalnettet vil forh ndsvisning ikke bli vist Dodatek Podgl d nie wy wietla si po wybraniu kana u z siatki kana w Adenda Quando selecciona um canal na grelha de canais n o apresentada uma pr visualiza o Anex C nd selecta i un canal din grila de canale nu este afisata o imagine de examinare RU 1 SK Priloha ed vyberiete kanal z mrie ky kan lov uk ka sa nezobraz SL Dodatek o na seznamu kanal
8. on the TV xxPFL5xx6 xxPFL4xx6 a CH Downloaded From TV Manual com Manuals xxPFL3xx6 DesignLine Tilt Other ways to switch channels e Enter a channel number using the Numeric buttons Press lt BACK on the remote control to return to the previous channel When you use a favourite list you can only select those channels in the list see Create and use lists of favourite channels on page 19 View channel preview You can view a preview of all available channels with the channel grid e Press Q FIND L gt The channel grid appears preview a channel select it L gt watch a channel select it then press OK EN 11 English Watch connected devices Note Before you select a device as a source switch the device on Select a device from the source list 1 Press SOURCE SOURCE 1 L gt The source list appears Press W to select a device U N Press OK to confirm your choice L gt The switches to the selected device From TV Manual com Manuals Adjust TV volume Press on the remote control Press lt I on the TV xxPFL5xx6 xxPFL4xx6 L i 4 xxPFL3xx6 DesignLine Tilt N To mute or unmute so
9. 0E 021 081 5 sdq ok CSV VX80r 1 9CH suoisua1xo DVV AH DTOVV 2T2VV dd3g pue SL oE Sd EDV or sdqw OF pdur Sodur Sdur 080 0 6 dA pe 106 19945 sdqW Or A1 o W2d1 EDY EdW C Mee bd dH dW dd 9 0 AT dH dW dd 9 0801x0761 t93dl4 sdqw gy 0801061 2934 9 5 89 080 0 6 mee sewo Downloaded From TV Manual com Manuals Contact information Belgi Belgique 0800 80 190 Gratis Gratuit cHAT www philips com support 00800 11 544 24 Ceska republika 800 142 840 Bezplatny hovor Danmark 3525 8759 Lokalt opkald Www philips com support Deutschland 0800 000 7520 kostenfrei cHAT Www philips com support EM 8a 0 0800 3122 1280 KArjon xwpis Espana 900 800 655 Tel fono local gratuito solamente para clientes en Espa a cHAT www philips com support Estonia 8000100288 kohalik k ne tariifi France 0805 025 510 num ro sans frais cHAT Www philips com support Hrvatska 0800 222778 free Ireland South 1 800 7445477 North 0 800 331 6015 Italia 800 088774 Numero Verde 7 727
10. Tilt Downloaded From TV Manual com Manuals EN English 4 Use your TV This section helps you perform basic TV operations Switch your TV on e Press the power switch on the TV L gt There is a short delay before the TV DesignLine Tilt H responds xxPFL5xx6 hi OFF ON xxPFL5xx6 xxPFL4xx6 xxPFL3xx6 From TV Manual com Manuals If the TV is in standby e Press Standby On on the remote control Switch your TV to standby e Press Standby On on the remote control again L gt The remote control sensor on the TV switches to red Switch your TV off e Press the power switch on the TV again L gt The remote control sensor on the TV switches off L gt For xxPFL5xx6 the TV no longer consumes energy Ly For xxPFL4xx6 xxPFL3xx6 and DesignLine Tilt though the TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect he TV power cable from the power outlet or turn off the power switch Note e f you cannot locate your remote control and want to switch on the TV from standby press CH on the TV Switch channels Press CH or CH on the remote control Press CH
11. a picture but sound quality is poor Note f no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected Check that the volume is not set to 0 e Check that the sound is not muted There is a picture but the sound quality is poor Check that the sound settings are correctly set There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre From TV Manual com Manuals connection issues There are problems with devices Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device If the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again If there are intermittent sound disruptions check that output settings from the HDMI device are correct If you use an HDMI to DVI adapter HDMlI to DVI cable check that an additional audio cable is connected to AUDIO IN mini jack only Computer connection issues The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate Set the TV picture format to unscaled Contact us f you cannot resolve your problem
12. channels until you do 5 Select your country UK and press OK re tune You should re tune your TV every 6 Select Antenna DVB T and press OK few months to check for any new channels 7 Select Start and press OK If you choose to connect your TV to satellite or The installation can take several minutes cable with a digital box then it will not be affected by switchover and you won t need to When the installation is complete press OK re tune Your TV is now retuned If you have any questions please contact your If you are missing any channels it may be equipment supplier or call Digital UK that they are not available in your area or 0845 6 50 50 50 or visit www digitaluk co uk that your aerial needs upgrading When does switchover happen Nw 21 Copeland switches on October 17 2007 Re EF Shetland Islands STV North Y STV Central 2010 11 2008 09 Yorkshire 2011 Central Anglia 2011 11 Wales 20 Visit us at digitaluk co uk Call us 0845 6 50 50 501 ake 2012 West Country 2009 v Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends Rates may vary for calls from non BT lines From TV Manual com Manuals
13. codes Lock or unlock one or more channels 1 Press 2 Select Setup gt Channel settings gt Child lock gt Channel lock Ly A list of channels is displayed J Select the channel that you want to lock or unlock then press OK L gt The first time you lock or unlock a channel you are prompted to enter your PIN code 4 Enter your code and press OK L lf the channel is locked a lock icon is displayed 5 Repeat the process to lock or unlock more channels From TV Manual com Manuals 6 To activate the locks switch the TV on and off L gt When you switch channels with CH or CH the locked channels are skipped L gt When you access the locked channels from the channel grid you are prompted to enter your PIN code Set parental ratings Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings lower than your child s age 1 Press ff 2 Select Setup gt Channel settings gt Child lock gt Parental rating L gt A code setup screen appears J Enter your code using Numeric buttons L gt The rating menu appears Select an age rating then press OK Press fft to exit View Scenea You can display a default picture as the wallpaper on your TV You can also load another picture as the wallpaper If the sleeptimer is off the wallpaper is displayed for 240 minutes Other
14. connections Digital audio and video input from high definition digital devices such as Blu ray 1 AUDIO L R players Audio input from analogue devices connected to VIDEO L AUDIO R VHS G f Headphone Stereo audio output to headphones or VIDEO earphones Composite video input from analogue devices such as VCRs COMMON INTERFACE Slot for a Conditional Access Module CAM 4 COMMON INTERFACE 3 USB Data input from USB storage devices USB Sp amp From TV Manual com Manuals e HDMI cable and HDMI DVI adaptor Connect a computer AUDIO IN Before you connect a computer to the TV Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer Connect a computer with one of the following English connectors Connections via or VGA require an additional HDMI I audio cable VGA cable HDMI cable AUDIO IN LEFT RIGHT VGA DVI DVI HDMI cable AUDIO IN LEFT RIGHT VGA DVI Downloaded From TV Manual com Manuals 35 Use a Conditional Access Module A Conditional Access Module CAM is provided by digital TV service operators to decode digital TV channels Note Refer to the documentation from your service operator on how
15. of the TV backlight to match lighting conditions MPEG artifact reduction Smooth out transitions on digital pictures You can switch this feature on or off From TV Manual com Manuals Colour enhancement Make colours more vivid and improve the details in bright colours You can switch this feature on or off Gamma For selected models Adjust the midtone intensity in the picture Black and white are not affected PC mode Adjust the picture when a PC is connected to the TV via HDMI or DVI Light sensor Adjust settings dynamically based on the current lighting conditions Picture format Change the picture format Screen edges Adjust the viewing area when set to maximum you may see noise or the rough edge of an image Picture shift If available adjust the picture position for all picture formats except for Auto zoom and Wide screen Change picture format Press tt ADJUST 2 Select Picture format then press OK 3 Selecta picture format then press OK Summary of picture formats The following picture settings can be configured Note Depending on the format of the picture source some picture settings are not available Auto format For selected models Not for PC mode Automatically display the suitable picture format If not widescreen is applied Auto fill For selected models Adjust the picture to fi
16. of the following options then press OK e Hearing impaired Enable or disable hearing impaired subtitles e Visually impaired Some digital TV channels broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary Use the colour buttons to select the options Red Turn off visually impaired audio e Green Speakers Hear visually impaired audio from speakers only Yellow Headphone Hear visually impaired audio from headphones only Blue Speaker headphone Hear visually impaired audio from both speakers and headphone e Mixed volume Adjust the volume of visually impaired audio beep Switch on audio feedback when buttons are pressed on the remote control or TV Tip Press the colour buttons on the remote control to enter the options From TV Manual com Manuals Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu 1 Press TEXT L gt The teletext screen appears 2 Press OPTIONS L gt The teletext options menu appears 3 select one ofthe following options then press OK Freeze page Unfreeze page Freeze unfreeze the current page e Dual screen Full screen Switch between full screen and dual screen eletext overview Switch on Table of Page
17. remote control or TV e Audio out delay Automatically sync he image on your TV to the audio from a connected home theatre e TV position Apply the best settings for your TV based on how it is mounted Teletext 2 5 Enable or disable Teletext 2 5 For digital TV e Clock Display or remove the time from the TV and set clock options EN 27 English Start demo You use demonstrations to better understand the features of your T V Some demos are not available on certain models Available demos are displayed in the menu list While you watch TV press fft Select Setup gt Watch demo OK Select a demo and press OK to view it To exit press D Reset the TV to factory settings You can restore the default picture and sound se se 1 2 3 4 ings of your TV The channel installation ings remain the same Press ff Select Setup gt TV settings gt Factory settings then press OK f you are prompted to enter a code enter he child lock code see Set or change code on page 22 L gt A confirmation message is displayed Press OK to confirm From TV Manual com Manuals 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available Afterwards you can re install and fine tune channels
18. there are updates available through digital broadcasts 1 Press 2 Select Setup gt Software settings gt Check on major updates 3 If an update is available follow the on screen instructions to start the update L gt restarts after the software update is complete Downloaded From TV Manual com Manuals Change TV preferences Use the preferences menu to customise your TV settings 1 Press fft 2 Select Setup gt TV settings gt Preferences 3 Select one ofthe following then press OK e Menu language Select a menu language e Sleep timer Switch the TV to standby after a pre defined duration e Location Optimise TV settings for your location home or shop E sticker For shop mode only Switch the e sticker on or off e Volume bar Display the volume bar when you change the volume e Auto switch off conserve energy set the TV to switch to standby automatically after a period of inactivity This TV is also designed with other energy efficiency settings If there is no user interaction such as pressing a remote control button or a control on the front panel for four hours he TV will automatically switch to standby e Channel information size Change he type of information that is displayed when you switch channels Universal access Enable or disable he universal access menu e Key beep Enable audio feedback when you press buttons on the
19. to insert a smart card into the Conditional Access Module Insert and activate a CAM Caution Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your TV 1 Switch off the TV and disconnect it from the power outlet 2 Following the directions printed on the CAM gently insert the CAM into the COMMON INTERFACE at the side of the TV J Push the CAM in as far as it will go 4 Reconnect the TV to the power outlet 5 Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use this action deactivates digital services COMMON INTERFACE From TV Manual com Manuals Access CAM services 1 Insert and activate the CAM see Insert and activate a on page 36 2 Press OPTIONS 3 Select Common interface L gt Applications provided by the digital TV service operator are displayed Note This menu option is available only if the CAM is inserted and activated correctly Use Philips EasyLink Get the most out of your HDMI Consumer Electronic Control CEC compliant devices with Philips EasyLink enhanced control features If your HDMI CEC compliant devices are connected through HDMI you can control them at the same time with your TV remote control To enable Philips EasyLink you need to Connect at l
20. unauthorised access to channels hide them from the channel list To preve 1 Wh Ly ile you watch TV press Q FIND The channel matrix menu is displayed 2 Press OPTIONS Ly 3 Sele OK T 4 Sele The channel options menu is displayed ct Show hidden channels then press he hidden channels are displayed ct the channel to unhide then press OPTIONS 5 Sele ct Unhide channel then press OK L gt The channel is no longer marked as Ly hidden You can access the hidden channel 6 To exit press D Access CAM services 1 Insert and activate the CAM see Insert and 2 Pres 3 Sele activate a CAM on page 36 s OPTIONS ct Common interface L gt Applications provided by the digital TV service operator are displayed inserte This menu option is available only if the CAM is d and activated correctly EN 31 English 7 Connect devices This section describes how to connect devices with different connectors For the location of these connectors on your TV see the quick start guide More examples of connections with other devices are provided in the Quick Start Guide Note You can use different types of connectors to connect a device to your TV Tip After connection for easy access to your device add it to the home menu press fft then select Add new device Back connections 1 TVAN
21. when your TV is in standby mode The channels stored in your TV are updated every morning according to the channel information in the broadcast 1 Press 2 Select Setup gt Channel settings gt Channel installation gt Automatic channel update 3 Select On to enable the automatic update or select Off to disable it 4 To return press D EN 29 English Manually install analogue channels You can search and store analogue TV channels one at atime Note Ifyou have not set the child lock code you may be prompted to set the code see Set or change code on page 22 Step 1 Select your system Note f your system settings are correct skip this step 1 Pes 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt System then press OK 3 Select the correct system for your country or region then press OK Step 2 Search and store channels 1 Press ft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt Find channel then press OK e If you know the three digit frequency of the channel enter it e To search select Search then press OK 3 When the channel is found select Done then press OK e To store the channel as a new number select Store as new channel then press OK e store the c
22. x 39 9 mm e Weight 7 2 kg With TV stand Dimension WxHxD 761 x 525 5 x 221 mm e Weight 8 9 kg 32PFL4606H e Without TV stand Dimension WxHxD 795 6 x 510 6 x 93 1 mm e Weight 8 2 kg With TV stand Dimension WxHxD 795 6 x 557 6 x 221 4 mm e Weight 9 8 kg 32PFL3606H 32PFL3506H e Without TV stand Dimension WxHxD 795 6 x 508 4 x 93 1 mm e Weight 8 2 kg With TV stand Dimension WxHxD 795 6 x 557 6 x 221 4 mm Weight 9 8 kg From TV Manual com Manuals 32PFL3406H e Without TV stand Dimension WxHxD 787 5 x 505 1 x 80 5 mm e Weight 7 8 kg e With TV stand Dimension WxHxD 787 5 x 547 26 x 221 43 mm Weight 9 4 kg 26PDL49x6H e WithoutTV stand Dimension WxHxD 641 5 x 428 3 38 7 mm Weight 8 30 kg With TV stand Dimension WxHxD 641 5 x 428 3 x 166 4 mm e Weight 8 98 kg 22PDL49x6H e WithoutTV stand Dimension WxHxD 5325 x 357 x 36 6 mm e Weight 5 6 kg With TV stand Dimension WxHxD 5325 x 357 x 127 mm Weight 59 kg 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it Check that the power cable is securely connected The remote control is not working properly Check that the r
23. 0 x 200 4xM6 10 mm 32 200 x 200 4 6 10 mm 26 00 100 4x 10 mm 22 00x100 4x 0 mm Downloaded From TV Manual com Manuals Product specification Design and specifications are subject to change without notice 47PFL4606H e Without TV stand Dimension WxHxD 1129 8 x 697 8 x 83 mm e Weight 17 5 kg With TV stand Dimension WxHxD 1129 8 x 745 6 x 268 mm e Weight 209 kg 46PFL5606H e Without TV stand Dimension WxHxD 1080 8 x 652 9 x 39 9 mm e Weight 169 kg With TV stand Dimension WxHxD 1080 8 x 705 2 x 294 9 mm e Weight 20 52 kg 42PFL4606H e Without TV stand Dimension WxHxD 1018 5 x 635 1 x 83 mm e Weight 11 7 kg With TV stand Dimension WxHxD 1018 5 x 683 x 2364 mm e Weight 142 kg 42PFL3606H 42PFL3506H e WithoutTV stand Dimension WxHxD 1018 5 x 635 8 x 83 mm e Weight 11 7 kg With TV stand Dimension WxHxD 1018 5 x 683 x 2364 mm e Weight 142 kg EN 41 English 40PFL5xx6H e Without TV stand Dimension WxHxD 946 x 577 5 x 40 mm e Weight 12 3 kg With TV stand Dimension WxHxD 946 x 631 x 243 6 mm e Weight 15 kg 37PFL4606H e Without TV stand Dimension WxHxD 912 3 x 577 1 x 84 1 mm e Weight 10 3 kg e With TV stand Dimension WxHxD 912 3 x 625 2 x 236 4 mm e Weight 12 8 kg 32PFL5x06H e Without TV stand Dimension WxHxD 761 x 473
24. 250 66 17 local Latvia 80002794 local Lithuania 880030483 local Luxemburg Luxembourg 080026550 Ortsgesprach Appel local Magyarorszag 06 80 018 189 Ingyenes hivas Nederland 0800 023 0076 Gratis nummer Norge 22 70 81 11 Lokalsamtale Osterreich 0800 180 016 Polska 00800 3111 318 Portugal 0800 780 902 Chamada Gratis 495 961 1111 8800 200 0880 No Romania 0800 894910 Apel gratuit 0318107125 Apel local 381 114 440 841 Lokalni poziv Slovensko 0800 004537 Bezplatny hovor Slovenija 600 744 5477 lokalni klic Sverige 08 5792 9100 Lokalsamtal Suisse Schweiz Svizzera 0800 002 050 Schweizer Festnetztarif Tarif r seau fixe France Suomi 09 2311 3415 paikallispuhelu T rkiye 444 7 445 United Kingdom 0800 331 6015 Toll Free 0 800 500 697 This information is correct at the time of print For updated information see www philips com support updated 20110912 Downloaded From TV Manual com Manuals Contents 1 Notice 2 2 Important 4 3 YourTV 7 TV controls 7 Remote control 8 Remote control usage 9 4 Use your TV 10 Switch yourTV on 10 Switch your TV to standby 10 Switch your TV off 11 Switch channels 11 Watch connected devices 12 Adjust TV volume 12 Use teletext 13 5 Use more of your TV 14 Access TV menus 4 Add device to the home menu 4 Rename devices fro
25. Play once or repeatedly _ Full screen Small Screen View the video stretched to fill the screen or view in its native picture format Shuffle on Shuffle off Play in sequence or at random Show info Display the file name Downloaded From TV Manual com Manuals View a slideshow with music You can view a picture slide show with background music Select an album of songs Press OK Press gt to return to the USB content browser Select an album of pictures Press OK Ly The slideshow begins OR WN To exit press d Disconnect a USB storage device Caution Follow this procedure to avoid damage to your USB storage device 1 Press gt to exit the USB browser 2 Wait for five seconds then disconnect the USB storage device Listen to digital radio channels 1 Press a FIND L gt The channel matrix menu is displayed 2 Press OPTIONS then select Select list gt Radio L gt The radio channel grid appears 3 Selecta radio channel and press OK to listen EN 25 English Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available Ways to update the TV software You can update the TV software in one of the following ways A with a USB storage device B when prompted through digital broadcasts or after being pro
26. Register your product and get support at www philips com welcome PFL4606 PFL5606 06 3 06 PFL5xx6 37PFL4606 32PFL5x06 32PFL4606 32PFL3x06 26PDL49x6 22PDL49x6 DesignLine Til DN Lr TI r EN User manual PHILIPS Downloaded From TV Manual com Manuals BG CS DA DE EL ES ET FI FR Downloaded From TV Manual com Manuals Addendum When you select a channel from the channel grid a preview is not displayed Dodatek v b ru kan lu z mifZky nen n hled zobrazen Till g N r du v lger en kanal fra kanaloversigten er der ikke nogen eksempelvisning Nachtrag Wenn Sie einen Sender aus der Senderliste ausw hlen wird keine Vorschau angezeigt va 6gv Cuando se selecciona un canal la parrilla no se muestra una vista previa Lisa Kui valite kanali kanalite tabelist siis eelvaadet ei kuvata Lis ys Kun valitset kanavan kanavaruudukosta esikatselua ei n ytet Addenda Lorsque vous s lectionnez une cha ne dans la grille des cha nes
27. Starting in late 2007 and ending in 2012 television services in the UK will go completely digital TV region by TV region Please see the next page to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides im partial information on what people need to do to prepare for the move to digital and when they need to do it Downloaded From TV Manual com Manuals How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover at www digitaluk co uk When the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing TV channels and also to pick up new ones get set for digital V EN 47 English Digital UK the body leading the digital TV How to re tune switchover will advise you when you need to 1 Press fft on the remote control re tune during the switchover 2 Select Setup and press OK If you do not re tune your channels when 3 Select Search for channels and press OK advised to do so by Digital UK you may lose 4 Select Reinstall channels and press OK some or all of your
28. TENNA Signal input from an antenna cable or satellite 70 r TV ANTENNA From TV Manual com Manuals 2 EXT 1 RGB and CVBS Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT RGB CVBS CULL CLE 3 DIGITAL AUDIO OUT Digital audio output to home theatres and other digital audio systems ISPDIF OUT 4 SERV U For use by service personnel only 5 PC IN and AUDIO IN Audio and video input from a computer LEFT RIGHT VGA DVI 6 HDMI 1 ARC Digital audio and video input from high definition digital devices such as Blu ray players Also outputs TV audio to other EasyLink compliant devices such as home theatre systems HDMI Connections via DVI or VGA require an additional audio cable see Connect a computer on page 35 Downloaded From TV Manual com Manuals T HDMI 2 For selected models Digital audio and video input from high definition digital devices such as Blu ray players Connections DVI or VGA require an additional audio cable see Connect a computer on page 35 EXT 2 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EN 33 English 2 HDMI Side
29. V During installation make sure that you select the country where you are installing the TV Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV EN 43 English If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small ry using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is
30. andom e Rotate image Rotate photo e Show info Display the picture name date size and next picture in the slide show Setas Scenea Set the selected picture as the TV wallpaper see View Scenea on page 22 To return press D Note Rotate image and Show info appear only when the slideshow is paused Listen to music 1 2 In the USB browser select Music then press OK Select a music track or album then press OK to play To control play press the play buttons bto play e Mto pause 4or PI to play the previous or next track or PP to search forward or backward Mito stop Change music settings e While you play music press OPTIONS to access one of the following settings then press OK Stop playback Stop music play e Repeat Play a song once or repeatedly Shuffle on Shuffle off Play songs in sequence or at random Show info Display the file name Watch video 1 In the USB browser select Video then press OK 2 Press OK to play 3 To control play press the play buttons gt to play e Ito pause PI to play the previous or next video 4 lt or PP to search forward or backward e Mito stop Change video settings e While you play video press OPTIONS to access one of the following settings then press OK e Stop playback Stop video play e Repeat
31. device If you connect an EasyLink compliant device that has speakers you can get the most out of those speakers if you listen to TV audio through them If the connected device is HDMI ARC compliant and you connect the device through an HDMI ARC connector you can output T V audio through the cable You will not need an additional ardia cable 1 Make sure that the EasyLink compliant device is connected through an HDMI ARC connector see Back connections on page 32 Press fft Select Setup gt TV settings gt EasyLink gt HDMI1 audio out then press OK WN 4 Select one of the following then press OK On Hear the TV audio through the connected EasyLink device You cannot hear the TV audio through the TV speakers or through devices connected through the digital audio out connector Off Hear the TV audio through the TV speakers or through a device connected through the digital audio out connector 3 5 Control playback with the TV remote control play buttons Switch all EasyLink devices to standby To save electricity you can switch all unused EasyLink compliant devices to standby 1 Press the green button 2 Select Switch off unused sources then press OK L gt All connected EasyLink devices switched to standby Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington ock between the
32. east two HDMI CEC compliant devices through e Configure each HDMI CEC compliant device properly Switch on EasyLink Note The EasyLink compliant device must be switched on and selected as the source Philips does not guarantee 100 interoperability with all HDMI CEC devices Switch on or off EasyLink When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source Note f you do not intend to use Philips EasyLink switch it off 1 Press ft elect Setup gt settings gt 2 Select Setup gt TV setting EasyLink gt EasyLink elect n or then press 3 Select On or Off then press OK Use one touch play 1 After you switch on EasyLink press play on your device L gt The TV automatically switches to the correct source Use one touch play control If you connect multiple HDMI CEC devices that support this setting all such devices respond to the play control buttons on this TV remote control Caution This is an advanced setting Devices that do not support this setting will not respond to the TV remote control 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt EasyLink remote control 3 Select On or Off then press OK Downloaded From TV Manual com Manuals Use one touch standby When you press on the TV remote control the TV and all HDMI CEC compl
33. ectronics N V bears no responsibility for improper wall mounting that result in accident injury or damage f you need to store the TV disassemble he stand from the TV Never lay the TV on its back with the stand installed Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the T V Never connect the TV to the power outlet if the voltage is different Parts of this product may be made of glass Handle with care to avoid injury and damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over he edge of the surface ever place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating ever install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk o
34. emote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if hey are flat or weak e Clean the remote control and sensor ens The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your preferred anguage When turning the TV on off to standby you hear a creaking sound from the TV chassis o action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance Downloaded From TV Manual com Manuals Cannot remove e sticker banner displayed on theTV To remove the logos and images set the location of your TV to home 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Location 3 Select Home and press OK TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T DVB T Lite or DVB C in your country Some channels are not automatically installed on myT
35. erred TV channels so that you can find those channels easily View only the list of favourite channels 1 while you watch TV press FIND L gt The channel matrix menu is displayed 2 Press OPTIONS Downloaded From TV Manual com Manuals 3 Select Select list gt Favourites then press OK L gt Only channels in the favourites list appear in the channel grid Note The favourites channel grid is empty until you add channels into the favourites list View all channels You can exit the favourites list and view all installed channels 1 while you watch TV press Q FIND L gt The channel matrix menu is displayed 2 Press OPTIONS 3 Select Select list gt All then press OK L gt All channels are displayed in the channel grid Note All favourite channels are marked by an asterisk when you view the channel grid Manage the favourites list 1 while you watch TV press Q FIND L gt The channel matrix menu appears Press OPTIONS Select Select list gt then press OK Press OPTIONS Select Mark as favourite or Unmark as favourite then press OK L gt The channel is added or removed from the favourite list Un BK WN Note All favourite channels are marked by an asterisk in the channel grid EN 19 English Use the Electronic Programme Guide The programme guide is an on screen guide available for digital chan
36. f injury fire or power cord damage ever place the TV or any objects on the power cord Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV Risk of damage to the TV screen Never touch push rub or strike the screen with any object e o avoid deformations and colour fading wipe off water drops as soon as possible Downloaded From TV Manual com Manuals Temperature and humidity On rare occasions depending on temperature and humidity minor condensation can occur on the inside of the glass front
37. ge or loss of data from the device Connect a USB storage device to play photos music or videos stored on it 1 Switch on theTV 2 Connect the USB device to the USB port on the side of your TV 3 Press f 4 Select Browse USB then press OK L gt The USB browser appears View photos 1 In the USB browser select Picture then press OK 2 Select a photo or a photo album then press OK to view the photo enlarged to fill the TV screen e view the next or previous photo press 4 3 To return press lt View a slide show of your photos 1 When a full screen image of a photo is displayed press OK L gt slide show begins from the selected photo Press the following buttons to control play e bto play e Mto pause e IMor PI to play the previous or next photo e Mito stop e return press D From TV Manual com Manuals Change slide show settings While you view a slide show press OPTIONS L gt The slide show options menu is displayed Select one of the following then press OK Start Stop slideshow Start or stop slideshow Slideshow transitions Set the transition from one picture to the next e Slideshow frequency Select the display time for each photo e Repeat Play once View the pictures in the folder once only or repeatedly Shuffle off Shuffle on View the pictures in sequential order or at r
38. ghts reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Terms of warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs E WP CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty From TV Manual com Manuals Pixel character
39. hannel as the previously selected channel select Store current channel then press OK From TV Manual com Manuals Step 3 Fine tune channels 1 Press ff 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt Fine tune then press OK 3 Press V to fine tune the channel Manually install digital channels You can search and store digital channels one at a time Note f you have not set the child lock code you may be prompted to set the code see Set or change code on page 22 Press fft Select Setup gt Channel settings gt Channel installation gt Digital Reception test gt Find channel then press OK NA Press the Numeric buttons to enter the channel frequency Select Search then press OK When the correct channel is located select Store then press OK 3 4 5 6 To exit press D Note Ifthe reception is poor reposition your antenna and repeat the procedure f you receive the channel with DVB C select Symbol rate mode gt Automatic unless your cable provider supplies you with a specific symbol rate value Rename channels You can rename channels The name appears when you select the channel 1 2 3 Ui 4 While you watch TV press Q FIND L gt The channel matrix menu is displayed Select the channel to rename
40. he home menu After you connect a device add it to the home menu 1 Press fft 2 Select Add new device 3 Follow the onscreen instructions to add the device to the home menu L gt The device is displayed in the home menu 4 watch the device switch it on then select it in the home meni 5 You also select the device with the source button see Select a device from the source list on page 12 Rename devices from the home menu After you add a new device to the home menu you can rename it to your preference The device name can be up to 16 characters long Press ff Select a device to rename Press z OPTIONS L gt The options menu appears Select Rename device then press OK To display the text input box press OK Un 4 For each character select a character then press OK e select uppercase letters lowercase letters or symbols In the row below the space key select the respective key then press OK 7 When complete select Done then press OK L gt The text input box closes 8 In the rename device menu select Done then press OK Remove devices from the home menu If a device is no longer connected to the TV remove it from the home menu Press ft Select a device to remove Press OPTIONS Select Remove device then press OK MmBRWN Select Remove then press OK L gt The selected device is re
41. iant devices switch to standby mode 1 Press Standby On on the TV s or device s remote control The TV and all connected HDMI devices switch to standby Set TV speakers to EasyLink mode If you connect an HDMI CEC compliant device that includes speakers you can choose to hear the TV from those speakers instead of the TV speakers When you play content from an EasyLink compliant home theatre if you want to mute the TV speakers automatically turn on EasyLink mode If the connected device is HDMI Audio Return Channel ARC compliant and you connect the device through an HDMI ARC connector you can output TV audio through the HDMI cable You do not need an additional aiidio cahle 1 Make sure that the EasyLink complian device is connected through an HDM ARC connector see Back connections on page 32 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select one of the fol owing then press OK Off Switch off TV speakers On Switch on TV speakers EasyLink Stream TV audio through the connected HDMI CEC device Switch the TV audio to the connected HDMI CEC audio device through the adjust menu EasyLink autostart urn off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device To mute the TV speakers select TV speakers gt Off EN 37 English Select speaker output with Adjust
42. ile you watch TV 6 EPG menu 20 F factory settings 28 favourites list add 19 H HDMI 32 34 HDMI ARC 32 hearing impaired 18 high definition HD content 32 34 home menu 14 home mode 27 install install channels install channels automatic 29 K kensington lock 39 EN 45 English L language audio 23 menu 23 subtitles 23 location home or shop 27 M multimedia 24 multimedia play files 24 mute TV speakers 38 P PC display resolutions 40 picture format 16 picture settings 16 Pixel Plus link 38 position the TV 27 power 40 R recycle 5 reinstall TV 29 remote control onscreen 37 overview 8 rename channels 31 reorder channels 31 S Scenea see screen saver 22 Scenea switch on 22 screen care 5 screen saver 22 settings assistant 15 picture 16 sound 17 shop mode 27 sleeptimer 21 smart picture 15 smart sound 17 From TV Manual com Manuals software digital broadcast update 27 version 26 sound settings 7 specifications 40 standby 0 subtitle language 23 subtitles 23 switch 0 switch TV on or off 1 T teletext dual screen 8 enlarge 8 subpages 8 Table Of Pages 9 teletext 2 5 9 troubleshoot 43 U universal access 8 V visually impaired 18 volume 12 W wall mount 41 Information about how to re tune your TV during the TV switchover _ _ Television in the UK is going digital bringing us all more choice and new services
43. istics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value a
44. ll the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC Auto zoom For selected models Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC Super zoom Not for HD and PC mode Remove the black bars on he side of 4 3 broadcasts There is minimal distortion e News deal settings for spoken audio such as news e Cinema Ideal settings for movies Game Ideal settings for games e DRAMA Ideal settings for drama programmes e Sports Ideal settings for sports programmes Movie expand 16 9 Not for HD and PC mode Scale 4 3 format to 16 9 4 3 Show the classic 4 3 format EF NW Wide screen Scale 4 3 format to 16 9 Unscaled For HD and PC mode only and in selected models only Allow maximum sharpness Some distortion may be present due to the broadcaster s systems Set your PC resolution to wide screen mode for best results Use smart sound Use smart sound to apply pre defined sound settings 1 Press tit ADJUST 2 Select Smart sound then press OK 3 select one of the following settings then press OK e Personal Apply the settings that were customised in the sound menu Standard Settings that suit most environments and types of audio Downl
45. m the home menu 4 Remove devices from the home menu 15 Change picture and sound settings 5 Use the universal access menu 8 Use advanced teletext features 8 Create and use lists of favourite channels 9 Use the Electronic Programme Guide 20 Display the TV clock 20 Use timers 21 Lock unsuitable content 22 View Scenea p Change language 23 Play photos music and videos on USB storage devices 24 Listen to digital radio channels 25 Update the TV software 26 Change TV preferences 27 Start a demo 28 Reset the TV to factory settings 28 Downloaded From TV Manual com Manuals 6 Install channels 29 Automatically install channels 29 Manually install analogue channels 30 Manually install digital channels 30 Rename channels 31 Rearrange channels 31 Hide channels 31 Unhide channels 31 Access CAM services 31 7 Connect devices 32 Back connections 32 Side connections 34 Connect a computer 35 Use a Conditional Access Module 36 Use Philips EasyLink 36 Use a Kensington lock 39 8 Product information 40 Supported display resolutions 40 Multimedia 40 Tuner Reception Transmission 40 Remote control 40 Power 40 Supported TV mounts 41 Product specification 4 9 Troubleshooting 43 General TV issues 43 TV channel issues 43 Picture issues 43 Sound issues 44 HDMI connection issues 44 Computer connection issues 44 Contact us 44 10 Index 45 EN 1 English 1 Notice 2011 Koninklijke Philips Electronics ri
46. menu If EasyLink or EasyLink autostart are selected access the adjust menu to switch the TV audio 1 while you watch TV press tff ADJUST 2 Select Speaker then press OK J Select one ofthe fo owing then press OK TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device e Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continue to stream from the TV speakers If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode Maximise display for subtitled video Some subtitles can create a separate subtitle bar under the video which limits the video display area After you switch on auto subtitle shift the subtitles display over the video image which maximises the video display area 1 Press 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift gt On then press OK Retain picture quality If your TV picture quality is affected by the picture processing features of other devices switch on Pixel Plus Link 1 Pres 2 Selec Setup gt TV settings gt EasyLink gt Pixel Plus Link gt On hen press OK From TV Manual com Manuals Hear TV audio through another
47. moved from the home menu Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Note While you watch TV or external devices press ttt ADJUST then select Smart picture or Smart sound for quick access to picture and sound settings Downloaded From TV Manual com Manuals Use settings assistant Use the settings assistant to guide you through the picture and sound settings 1 Press A 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Continue then press OK L gt The Settings assistant menu appears 4 Follow the onscreen instructions to choose your preferred picture settings Use smart picture Use smart picture to apply pre defined picture settings 1 Press tit ADJUST 2 Select Smart picture then press OK 3 Select one of the following settings then press OK e Personal Apply your customised picture settings e Vivid Rich and dynamic settings ideal for daytime e Natural Natural picture settings e Cinema deal settings for movies Game Ideal settings for games e Energy saving Settings that conserve the most energy Standard Defau most environmen video Photo Ideal setti t settings that suit s and types of ngs for photos e Custom Customise and store your personal pict Pe
48. mpted through digital broadcasts A Update with a USB device To update with a USB storage device you need An empty USB flash drive The USB flash drive must be FAT or DOS formatted Do not use a USB hard drive A computer with Internet access e Anarchive utility that supports the ZIP file format for example WinZip for Microsoft Windows or Stufflt for Macintosh Step 1 Check the current software version 1 Press fft 2 Select Setup gt Software settings gt Current software inf The current software information is displayed Write down the software version number To return press OK Un w To exit press 4 From TV Manual com Manuals Step 2 Download and update the latest software version 1 Connect a USB storage device Press ff Select Setup gt Update software 2 3 4 Follow the instructions to load a file onto your USB storage device 5 Connect the USB storage device to your computer then double click the file L gt AWeb page is launched 6 Follow the instructions in the Web page e fthe current software version matches the latest software update file you do not need to update your TV software e fthe current software version is smaller than the latest software update file download the latest software update file to the root directory of your USB device 7 Disconnect the USB storage device from the computer
49. nels It allows you to View a list of digital programmes being broadcast View upcoming programmes e Group programmes by genre Set reminders when programmes start e Setup preferred programme guide channels Switch on EPG 1 Pes 2 Select Programme guide then pressOK L gt The programme guide appears displaying information about the scheduled programmes Note Programme guide data is available only in selected countries and can take some time to load Change programme guide options You can set or clear reminders change the day and access other useful options in the programme guide options menu Press fft 2 Select Programme guide then press OK J Press OPTIONS L gt The programme guide menu appears 4 select one of the following options then press OK Set reminder Clear reminders Set or clear programme reminders Change day Set the programme guide day e info Display programme information Search by genre Search T V programmes by genre From TV Manual com Manuals Scheduled reminders List programme reminders Only available for upcoming programmes e Acquire EPG data Update the latest programme guide information Display the TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Set the TV clock ma
50. nual com Manuals Change audio language You can choose an audio language if it is available from your broadcaster For digital channels multiple languages may be available For analogue channels two languages may be available 1 while you watch TV press OPTIONS 2 For digital channels select Audio language select the language then press OK 3 For analogue channels select Dual I II select either language then press OK Show or hide subtitles 1 while you watch TV press SUBTITLE 2 Select one of the following then press OK Subtitles on Always display subtitles Subtitles off Never display subtitles during mute When audio is muted display subtitles Note Repeat this procedure to enable subtitles on each analogue channel Select Subtitles gt Subtitles off to disable subtitles Select a subtitle language in digital channels Note When you select a subtitle language in a digital TV channel as described below the preferred subtitle language set in the installation menu is temporarily overruled While you watch TV press OPTIONS Select Subtitle language then press OK Select a subtitle language Press OK to confirm EN 23 English Play photos music and videos on USB storage devices Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for dama
51. nually In some countries you need to set TV clock manually Press fft Select Setup gt TV settings gt Preferences gt Clock Select Auto clock then press OK Select Manual then press OK Select Time or Date then press OK Press the Navigation buttons to set the time or date Select Done then press OK CON N Press to exit Note f your selected country supports digital broadcast the clock displays the time data from your TV service operator as priority Display the TV clock 1 while you watch TV press OPTIONS L gt The options menu is displayed 2 Select Clock L gt The clock is displayed To disable the clock repeat the procedure Change the clock mode 1 Press elect Setup gt settings gt 2 Select Setup gt TV setting Preferences gt Clock gt Auto clock 3 Select Automatic or Manual then press OK Change the time zone Note This option is only available if you select Auto clock gt Automatic in countries with clock transmission data Press fft Select Setup gt TV settings gt Preferences gt Clock gt Time zone 1 2 3 Select your time zone 4 Press OK to confirm Use daylight saving Note This option is only available if you select Auto clock mode gt Manual Press fft Select Setup gt TV settings g
52. oaded From TV Manual com Manuals Manually adjust sound settings 1 2 Press fft Select Setup gt TV settings gt Sound then press OK L gt The Sound menu appears Select one of the following settings then press OK Smart sound Access predefined smart sound settings Reset Reset to factory default settings Clear sound Enhance the sound clarity Bass Adjust the bass level Treble Adjust the treble level Surround Switch on spatial sound Incredible Surround For selected models Enhanced spatial sound for increased surround effect Headphone volume For models with headphones Adjust headphone volume Auto volume levelling Automatically reduce sudden volume changes for example when switching channels Balance Adjust the balance of the right and left speakers Digital output format Select the type of digital audio output through digital audio output connector Convert non PCM audio type to PCM format e Multichannel Output audio to the home theatre EN 17 English Use the universal access menu You can activate the universal access menu during the first installation Once enabled you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices 1 While you watch TV press OPTIONS L gt The TV options menu appears 2 Select Universal access then press OK 3 select one
53. ov izberete kanal ni prikazan predogled SR Dodatak ada izaberete kanal iz mre e kanala pregled se ne prikazuje Downloaded From TV Manual com Manuals Till gg N r du markerar en kanal i kanal versikten visas ingen f rhandsgranskning Ek Kanal izgarasindan bir kanal se ti inizde bir nizleme g r nt lenmez 5 14 AR e Sl lt 84 Lic DVWV AH DTDDV 5 5191 9LS 9L ueipue 3 a Wod en ueipuo 31q WOd IWDd usipus VN VN 11 819 1 991 ssi OZE 9ST MOS VN VN 196 08 9 95 8 OF Al d DWV SHIDTOV dHidWidd 9 EdW Z L42427 LDAdW 1HOdsv sd X OF oE 0801X076 10 1945 0 080061 Preteen 49427 LDAdW MEEN WId el V ADdQV IOd e 0801x0764 sdqw 8 oE 9 5 89 vor x wwws ox 1HOdsv x 2T2VV 08010861 10 1945 EdW Z 142427 LO3dM WOd 5 x MPI W WOddV WOd 0801 0 6 F9CH AAW __ sd x Ajuo qW
54. prevent this do not expose the TV to direct sunlight heat or extreme humidity If condensation occurs it will disappear spontaneously after the TV has played for a few hours The condensation moisture will not harm the TV or cause malfunction Disposal of your old product and batteries 5 Your product is designed and manufactured with high quality materials and components which can be recycled and reused A When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health EN 5 English Environmental efforts Philips continuously focuses on lowering the environmental impact of its innovative consumer products We aim our efforts towards environmental improvement
55. refer to the FAQs for this product at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as listed in the Addendum VN Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 10 Index A age rating 22 analogue channels language change 23 audio language 23 enable 36 Insert 36 care 5 channels channel list 11 favourites 19 hide or unhide 19 install automatic 29 rearrange 31 rename 31 reorder 31 switch 11 update 29 child lock 22 clock 20 common interface 36 computer see PC 35 Conditional Access Module 36 connect connect device 32 connect PC 35 connect USB 24 connectors 32 34 controls 7 D demo 28 devices add 14 watch 12 digital channels digital radio 25 language change 23 subtitles 23 Downloaded From TV Manual com Manuals dimensions 41 display wallpaper 22 E EasyLink control devices from TV remote 37 enable 37 hear from other speakers automatically 37 manually 38 picture quality retain 38 subtitled video maximise view 38 switch to standby all devices 38 Electronic Programme Guide 20 environmental care end of use 5 5 wh
56. rsonal to app ure settings Select these settings EN 15 English Manually adjust picture settings 1 Press ft 2 Select Setup gt TV settings gt Picture then press OK 3 select one of the following settings then press OK Smart picture Access predefined smart picture settings Reset Reset to factory default settings e Contrast Adjust the intensity of backlight areas while the video contents are kept unchanged e Brightness Adjust the intensity and details of dark areas e Colour Adjust colour saturation Compensate for colour variations Sharpness Adjust sharpness in the image Noise reduction Filter and reduce noise in an image Tint Adjust the colour balance in an image e Custom tint Customise tint setting Only available if Tint gt Custom is selected e Digital Crystal Clear Pixel Plus Pixel Plus HD Fine tune each pixel to match surrounding pixels This setting produces a brilliant high definition image HD Natural Motion For selected models Minimise juddering effects and enhance picture smoothness 100Hz Clear LCD 120Hz Clear LCD For selected models Reduce motion blurring and make picture clearer Advance sharpness Enable superior picture sharpness Dynamic contrast Enhance contrast Medium setting is recommended Dynamic backlight Adjust brightness
57. s during manufacturing reduction of harmful substances energy efficient use end of life instructions and product recycling To access energy efficient settings 1 while you watch TV press the green button on the remote control 2 Select one of the fol owing settings Energy saving Picture settings that conserve the most energy Mute screen If you only want to isten to audio from the TV you can urn off the TV display Other functions continue to operate normally Light sensor The built in ambient ight sensor lowers the brightness of he TV screen when the surrounding ight darkens e Switch off unused sources If you connect EasyLink compliant devices you can switch them off Download From TV Manual com Manuals 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome TV controls D 22 Adjust volume ft Home Access the home menu 3 CH Switch channels 2 Power Switch the TV on or off xxPFL5xx6 cH xxPFL4xx6 Downloaded From TV Manual com Manuals xxPFL3xx6 O O amp O81 2c DesignLine Tilt ec gt G gt
58. s indicated on the plug example 10 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover Copyright K Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world I DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories FACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries All other registered and unregistered trademarks are the property of their respective owners Downloaded From TV Manual com Manuals EN English 2 Read and understand all instructions before you If damage is caused by failure to follow instructions the warranty does not apply use your Important Safety Risk Risk From TV Manual com Manuals of electric shock or fire before use Never insert objects into the ventilation slots or other openings on the TV When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing
59. s teletext broadcasts e Enlarge Normal view Switch between enlarged and normal view of eletext pages Reveal Hide or reveal hidden information on a page such as solutions to riddles or puzzles e Cycle subpage If subpages are available automatically display each subpage in sequence e Languages Select a language for teletext Select teletext subpages A teletext page can contain several subpages Subpages are displayed next to the main page number 1 Press L gt The teletext screen appears 2 Press I or Pl to select a teletext page 3 Press or to enter a subpage Select T O P teletext broadcasts Jump from one subject to another without entering page numbers with Table Of Pages teletext broadcasts teletext broadcasts are available on selected TV channels 1 Press TEXT L gt The teletext screen appears 2 Press OPTIONS 3 Select T O P overview then press OK L gt The overview appears 4 Selecta subject D Press OK to view the page Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 is broadcast by a channel it is switched on by default 1 Press 2 Select Setup gt TV settings gt Preferences gt Teletext 2 5 3 Select On or Off then press OK to confirm Create and use lists of favourite channels You can create a list of your pref
60. slot and a permanent object such as a heavy table aye Downloaded From TV Manual com Manuals EN 39 English 8 Product information Product information is subject to change without notice For detailed product information to www philips com support Supported display resolutions Computer formats Resolution refresh rate 640x480 60 Hz 800 x 600 60 Hz 1024 x 768 60Hz 1280 x 720 60Hz e 1280 x 768 60Hz 1280 x 1024 60 Hz 1360 x 768 60Hz e 1680 x 1050 60Hz For Full HD only e 1920 x 1080 60 Hz For Full HD only Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50Hz 576p 50 Hz e 720p 50 Hz 60 Hz e 1080 50 Hz 60 Hz e 1080p 24Hz 25Hz 30Hz 50Hz 60Hz Multimedia Supported storage device USB Only FAT or FAT 32 USB storage devices are supported Supported multimedia file formats Images JPEG e Audio Video MPEG 2 MPEG 4 264 From TV Manual com Manuals Tuner Reception Transmission e Antenna input 5 coaxial IEC75 DVB DVB Terrestrial DVB C DVB T MPEG4 TV system DVB COFDM 2K 8K PAL B G D K SECAM B G D K VL Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel VHF For selected models
61. t Preferences gt Clock gt Daylight saving then press OK Nea Select Standard time or Daylight saving time then press OK Downloaded From TV Manual com Manuals Use timers You can set timers to switch the TV to standby at a specified time Tip Set the TV clock before you use timers Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined duration Tip You can switch off yourTV earlier or reset the sleep timer during the countdown Press fft Select Setup gt TV settings gt Preferences gt Sleep timer L gt The Sleep timer menu appears NA 3 Select a value between zero and 180 minutes L gt f you select zero the sleep timer switches off 4 Press OK to switch on the sleep timer L gt The TV switches to standby after the specified time EN 21 English Lock unsuitable content You can prevent your children from watching certain programmes or channels by locking the TV controls Set or change code 1 Press fft 2 Select Setup gt Channel settings gt Child lock J Select Set code or Change code L gt The Set code Change code menu appears 4 Enter your code using the Numeric buttons L gt Follow the on screen instructions to create or change your PIN code Tip f you forget your code enter 8888 to override existing
62. und e Press mute the sound e Press amp again to restore the sound Use teletext 1 Press TEXT L gt The main index page appears 2 Select a page with one of the following e Press the Numeric buttons to enter a page number e Press IM or BI to view the next or previous page e Press the Colour buttons to select a colour coded item e Press lt BACK to return to a previously viewed page 3 Press TEXT to exit teletext Note For UK users only Some digital TV channels offer dedicated digital text services for example 1 Downloaded From TV Manual com Manuals EN 13 English 5 Use more of your Access TV menus Menus help you to install channels change picture and sound settings and access other features 1 The menu screen appears as 2 2 Select one of the following then press OK Watch TV If a source other than antenna is selected switch back to the antenna source e Programme guide Access the electronic programme guide Browse USB If a USB device is connected access the content browser Scenea Switch on Scenea wallpaper e new device Add new devices to the home menu Setup Access menus to change picture sound and other settings Help Access the TV tour 3 Press ft to exit From TV Manual com Manuals Add device to t
63. wise it is displayed for the duration of the sleeptimer Switch on Scenea 1 Press fft 2 Select Scenea then press OK L gt f no picture has been set the default picture is displayed L gt If a customised Scenea picture 15 loaded that picture is displayed see Customise the Scenea picture on page 23 Customise the Scenea picture You can load another picture as the wallpaper Note When you load a new Scenea picture it overrides the current Scenea picture To use another picture as the wallpaper you need a USB storage device that contains a picture that is less than 1 MB in size Load a picture smaller than 1MB in size into a USB storage device Connect the USB storage device to the TV Press fft Select Browse USB then press OK Select a picture then press z OPTIONS Select Set as Scenea then press OK NO WB WN Press any button to exit Scenea Change language Depending on your broadcaster you can change he audio language subtitle language or both for a TV channel ultiple audio languages subtitles or both are broadcast through teletext or DVB T digital broadcasts Dual sound broadcasts With digital broadcasts you can select a subtitle language Change menu language 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Menu language then press OK J selecta language then press OK Downloaded From TV Ma
Download Pdf Manuals
Related Search