VEHICLE ALARM SYSTEM `GN6I` User manual.
Contents
1. indicates the engine immobilization by a long system s LED flashes Engine immobilization should be cancelled by pressing the override button Then the system s LED will go OFF 6 2 PROTECTION AGAINST ROBBERY ANTI CARJACK It is allowed to use this feature if the vehicle is operated outside the EU or in countries which do not apply the UNECE Regulation No 97 Four different modes of anti carjack feature are available 6 2 1 Anti carjack activated by turning the ignition ON or by opening any door with ignition ON The alarm system will stop a car After turning the ignition ON or opening any door with ignition ON it is necessary to press the override button cancel the anti carjack The cancelling of the anti carjack is confirmed by a LED flash lasting 1 second If the anti carjack is not cancelled until pre set time default is 40 seconds is elapsed the siren will start to sound and direction indicators will start to flash After the next 10seconds the engine will be immobilized and the alarm system will rearm automatically If the system was rearmed in order to disarm it press the remote s UNLOCK button turn ON the ignition and press the override button 6 2 2 Anti carjack activated by turning the ignition ON The alarm system will stop a car Anti carjack action is the same as described in 6 2 1 except After turning the ignition ON it is necessary to press the override button cancel the anti carjack 62. 2 2 Also available 2 anti carjack modes when the alarm system will not stop a car The modes are permitted for use in EU The modes is the same as described in 6 2 1 6 2 2 accordingly except the siren will start to sound and direction indicators will start to flash The engine will be immobilized only after the ignition is turned OFF and the alarm system will rearm automatically 6 3 AUTOMATIC REARMING The alarm system is automatically armed if the vehicle door bonnet or luggage compartment is not opened and the ignition is not turned ON within 45 seconds after the system is disarmed However it will not lock the doors of the vehicle It 1s possible to turn OFF the auto rearming feature during the installation of the alarm system 6 4 ARM DELAY TIME After the LOCK button is pressed the system will wait the pre set time limit default setting is 5 seconds installer is able to set it up to 45 seconds to avoid false alarms due windows or sunroof closing If the door luggage compartment or bonnet are not closed the alarm system siren will make three short beeps after the pre set time has elapsed The system will be armed anyway but the open entry for example door will not be protected until it is closed The system will confirm the closing of a door or compartment by a short siren beep and a single flash of direction indicators 6 5 WHILE DISARMING THE SIREN WILL BEEP 4 TIMES While disarming the siren will beep 4times if the alarm was
3. or immobilizer features are activated the system will respond to the first press of the override button as to the control of the anti carjack or the immobilizer functions To the next presses of the override button the system will respond as the PIN code is being entered 5 3 TURNING OFF EXIT THE OVERRIDE MODE Enter the PIN code and enter the code 11 in a way as described in 5 1 or 5 2 within 8 minutes of the previous step 5 4 CHANGING THE PIN CODE The user has a possibility to change the PIN code In order to do that do the following steps a enter the current PIN code the system s LED will emit single flashes frequently b in the same way as the PIN was entered before enter the code 88 The entry will be confirmed by a short flash of direction indicators c within 8 minutes of the previous step enter the new PIN twice one after another In a case the same code was entered twice the system will record this as the new PIN code and confirm it by a short siren sound If a mistake was made while entering the PIN code follow the steps from 5 4c all over again 6 EXTRA FEATURES The extra features allows you to have an increased level of security for the car and for the driver if it is required The installer will comment which extra feature is turned ON 6 1 INNER IMMOBILIZER With the inner immobilizer feature of the alarm system turned ON the engine immobilization will start each time the alarm system is disarmed The GN6I
4. triggered before the system was disarmed if this feature is set by installer 6 6 PAGER CONTROL It is possible to connect GN6I to a pager It sends alarm message in case of opening the vehicle doors bonnet or luggage compartment turning ignition ON or triggering sensor when system is armed It is possible to set up the system send no message in case the outer zone of sensor is triggered 6 7 ALARMING THROUGH GSM NETWORK It is possible to connect GN6I to GSM communicator GSWI1G It can call to 3 pre programmed phone numbers and report by the voice about the danger and it s cause or send SMS message to first number in case of opening the vehicle doors bonnet or luggage compartment turning ignition ON or triggering sensor when system is armed GSM communicator GSW1GP also features the car location place determination For more information refer to user manual 7 WARRANTY STATEMENT 7 1 MANUFACTURER AND DISTRIBUTOR OF THE ALARM SYSTEM GN6I takes no responsibility for the possible theft of the vehicle or any belongings from the vehicle 7 2 WARRANTY TERM FOR VEHICLE ALARM SYSTEM GN6I IS 24 MONTHS The warranty term is calculated from the day of the purchase If no original receipt is available the term starts from the week that the alarm system was manufactured this date is indicated on the information sticker for example 023 means year 2010 and week 23 The warranty does not cover the bonnet and door switches The warranty b
5. OVERRIDE BUTTON WHEN THE IMMOBILIZER IS ACTIVE When the inner immobilizer feature of the car alarm system is turned ON and the engine is immobilized the system s LED will emit long flashes The first press of the override button will turn the immobilization OFF The next press of the override button will start the bypassing procedure as described in chapter 3 2 1 3 3 ALARM INTERRUPTION The system will trigger the alarm if the vehicle s doors bonnet or luggage compartment are opened the ignition is turned ON or the sensor is triggered To interrupt the alarming of the system disarm and re arm it 3 4 CLOSING POWER WINDOWS AND SUNROOF ON ARMING It is possible to set GN6I in a way to have a 40 second electrical pulse in optional output for closing of windows and sunroof 4 DISARMING THE SYSTEM Press the remote control UNLOCK button once shortly The vehicle direction indicators will flash and the siren if it was set by installer will make two short 0 1 second confirmation sounds to inform you that the system is disarmed The Central Lock will be unlocked and the system s LED will turn OFF 5 THE OVERRIDE MODE Alarm system override mode is used for cases such as the loss of the remote control unit the remote s battery becoming completely discharged or in the case of the car being repaired With this mode ON the alarm system does not respond to the sensor s does not immobilize the engine and does not alarm N B the system s LED fla
6. VEHICLE ALARM SYSTEM GN6I User manual The GN6I is an advanced vehicle alarm system designed for cars with the original remote control central lock GN6I provides a reliable engine immobilization for the prevention of the vehicle s theft It also features a 4 digit PIN code that overrides the alarm system in the case of an emergency Model GN6Ib features built in ultrasonic or shock sensor 1 THE SET a system unit with wire harness b engine bonnet switch c user and installation manual d siren optional 2 SYSTEM UNIT The system unit performs the essential guarding functions thus it is extremely important to hide it well in the vehicle s passenger compartment The manufacturer supplies the alarm system with a default 4 digit PIN code which is written on the alarm system information sticker see Fig 1 Fig 2 The user should change it into another more memorable 4 digit number It is recommended to write down the new PIN code however do not keep this information inside the vehicle In addition do not use your birthday date or home address numbers for the PIN for security Sticker Sticker PIN code Fig 1 GN6lI a external view 3 ARMING THE SYSTEM Fig 2 GN6Ib external view 3 1 REGULAR ARMING For arming press the remote control LOCK button shortly The vehicle direction indicators will flash and the siren will make a short 0 1 second confirmation sound if this feature is set by the installe
7. ecomes void in the case of any modifications incorrect installation misuse mechanical chemical or electrical damage in other cases having no relation to manufacturing faults of the alarm system In the case of the alarm system becoming out of order or operating incorrectly please contact the installer or distributor of your alarm system for all warranty and post warranty services Statistics show that in most cases alarm system operate incorrectly because of the improper installation or due to vehicle defects For more details related to the product and FAQ visit the distributor s website or the manufacturer s website www kodinis It 8 END OF USE collection system for electrical and electronic product Please act according to your local rules and not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential ps THE PRODUCT is covered by the European Directive 2002 96 EC Please inform yourself about the local separate negative consequences for the environment and human health
8. r to inform you that the system is armed The system LED will go ON making constant short flashes When the system is armed opening the vehicle s door bonnet or luggage compartment impact to the vehicle s body or a movement inside the vehicle will trigger the alarm system 3 2 ARMING WITH SENSOR BYPASS 3 2 1 SENSOR BYPASS WITH THE HELP OF THE OVERRIDE BUTTON With the ignition turned OFF press the override button Watch the system s LED its flash will mean that the press has been confirmed Get out of the car close the doors and lock the Central Lock with the remote s LOCK button within 20seconds The siren will make a long 0 5second confirmation sound if this feature is set by installer to inform you that the system is armed with a bypassed ultrasonic or shock sensor and the movement inside the car or impact to car s body will not trigger the alarm 3 2 2 SENSOR BYPASS WITH THE HELP OF THE IGNITION KEY Turn the ignition ON and OFF three times Watch the system LED its flash will mean that the third ON OFF procedure is confirmed Get out of the car close the doors and lock the Central Lock with the remote s LOCK button within 20 seconds The siren will make a long 0 5second confirmation sound if this feature is set by installer to inform you that the system is armed with a bypassed ultrasonic or shock sensor and that movement inside the car or impact to car s body will not trigger the alarm 3 2 3 SENSOR BYPASS WITH THE HELP OF THE
9. shes frequently The override mode can be turned ON in two ways with the PIN code 5 1 TURNING ON THE OVERRIDE MODE WITH THE IGNITION KEY If the override button is not installed open the vehicle s door and turn the ignition ON After a short pause the system LED starts flashing double flashes count until the number of double flashes 1 double flash 1 unit corresponds with the first digit of the PIN code Turn the ignition OFF for a short time and turn it ON again Count the double flashes until the number corresponds with the second digit of the PIN code Turn the ignition key OFF and ON again Enter the remaining two digits of the PIN code in the same way Upon correct entry of all four digits of the PIN code the LED emits frequent flashes If you make a mistake while entering the PIN code turn OFF the ignition close the doors and follow 5 1 all over again 5 2 TURNING ON THE OVERRIDE MODE WITH THE HELP OF THE OVERRIDE BUTTON The most convenient way to turn ON the override mode is to enter the PIN code with the override button If the override button is installed check your notes with the alarm system s PIN on press the override button as many times as the value of the first digit of the PIN the time between the presses should not exceed 1 second and wait for a 1 second lasting LED flash which will mean that the first digit is entered successfully In the same way enter the second third and fourth digits of the PIN If the anti carjack
Download Pdf Manuals
Related Search