Instruction Manual
Contents
1. Service 28 29 30 Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained Follow instruction for changing accessories Keep handles dry clean and free from oil and grease lubricating and GEB048 2 CORDLESS RECIPRO SAW SAFETY WARNINGS 1 Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring Cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock 11 12 13 14 15 Use clamps or another practical way to secure and support the workpiece to a stable platform Holding the work by hand or against your body leaves it unstable and may lead to loss of control Always use safety glasses or goggles Ordinary eye or sun glasses are NOT safety glasses Avoid cutting nails Inspect workpiece for any nails and remove them before operation Do not cut oversize workpiece Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor workbench etc Hold the tool firmly Make sure the blade is not contacting the workpiece before the switch is turned on Keep hands away from moving parts Do not leave the tool running Operate the tool only when hand held Always switch off and wait fo2. ro Saw 012163 ENGLISH Original instructions SPECIFICATIONS Model JR100D JR102D Length of stroke 13 mm Strokes per minute min 0 3 300 Max cutting capacities Fipe SE mm Wood 50 mm Overall length with battery 355 mm Net weight 1 2kg 1 1 kg Rated voltage D C 10 8V Due to our continuing program of research and development the specifications herein are subject to change without notice Specifications and battery cartridge may differ from country to country Weight with battery cartridge according to EPTA Procedure 01 2003 END004 4 Symbols The following show the symbols used for the equipment Be sure that you understand their meaning before use OT Read instruction manual E Cum Only for EU countries Li ion Do not dispose of electric equipment or battery pack together with household waste material In observance of European Directive 2002 96 EC on waste electric and electronic equipment 2006 66 EC on batteries and accumulators and waste batteries and accumulators and their implementation in accordance with national laws electric equipment and battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility ENE020 1 Intended use The tool is intended for sawing wood plastic and ferrous materials GEA006 2 General Power Tool Safety Warnings A WARNING
3. insufficient tightening of the blade resulting in a serious injury For Model JR100D 1 Recipro saw blade 2 Blade clamp sleeve Insert the recipro saw blade into the blade clamp as far as it will go The blade clamp sleeve rotates and the saw blade is fixed Make sure that the saw blade cannot be extracted even though you try to pull it out A CAUTION If you do not insert the saw blade deep enough the saw blade may be ejected unexpectedly during operation This can be extremely dangerous NOTE You can not use the jig saw blade with JR100D 1 Blade clamp sleeve 2 Saw blade To remove the saw blade rotate the blade clamp sleeve in the direction of the arrow fully The saw blade is removed and the blade clamp sleeve is fixed at the released position NOTE If you remove the saw blade without rotating the blade clamp sleeve fully the sleeve may not be fixed In this case rotate the blade clamp sleeve fully then make the sleeve fixed at the released position For Model JR102D 1 Hex wrench 2 Bolt 3 Loosen 4 Tighten 1 Recipro saw blade 2 Hex wrench 3 Hole for recipro saw blade 4 Blade clamp To install the saw blade loosen the bolt by hex wrench When installing a recipro saw blade press the bolt with the hex wrench to open the slot during inserting the blade 1 Saw blade 2 Blade clamp 3 Hole for recipro saw blade 4 Hole for jig saw blade You can use both jig
4. saw blades B type and recipro saw blades according to your work Insert the saw blade straight into the blade clamp and tighten it by hex wrench Pull the saw blade lightly to make sure that the saw blade does not fall off during operation To remove the saw blade follow the installation procedure in reverse Hex wrench storage 1 Hex wrench 2 Projections When not in use store the hex wrench It is fixed by two projections as shown in the figure to keep it from being lost OPERATION ACAUTION Always press the shoe firmly against the workpiece during operation If the shoe is held away from the workpiece during operation strong vibration and or twisting will be produced causing the blade to snap dangerously Always wear gloves to protect your hands from hot flying chips when cutting metal Be sure to always wear suitable eye protection which conforms with current national standards Always use a suitable coolant cutting oil when cutting metal Failure to do so will cause premature blade wear Press the shoe firmly against the workpiece Do not allow the tool to bounce Bring the saw blade into light contact with the workpiece First make a pilot groove using a slower speed Then use a faster speed to continue cutting You can use the switch lever or trigger according to your work NOTE If the tool is operated continuously until the battery cartridge has discharged allow the tool to rest for 15 minut
5. Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool Work area safety 1 Keep work area clean and well lit Cluttered or dark areas invite accidents 2 Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes 3 Keep children and bystanders away while operating a power tool Distractions can cause you to lose control Electrical safety 4 Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock 5 Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded 6 Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock 7 Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or enta
6. al 2 Avoid storing battery cartridge in a container with other metal objects such as nails coins etc 3 Do not expose battery cartridge to water or rain A battery short can cause a large current flow overheating possible burns and even a breakdown Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 C 122 F Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out The battery cartridge can explode in a fire Be careful not to drop or strike battery Do not use a damaged battery SAVE THESE INSTRUCTIONS Tips for maintaining maximum battery life 1 Charge the battery before completely discharged Always stop tool operation and charge the battery cartridge when you notice less tool power Never recharge a fully charged battery cartridge Overcharging shortens the battery service life Charge the battery cartridge with room temperature at 10 C 40 C 50 F 104 F Let a hot battery cartridge cool down before charging it Charge the battery cartridge once in every six months if you do not use it for a long period of time cartridge FUNCTIONAL DESCRIPTION ACAUTION Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool Installing or removing battery cartridge 1 Buttons 2 Battery Always switch off the tool b
7. at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used Use of dust collection can reduce dust related hazards Power tool use and care 17 18 19 20 Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users 21 22 23 Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition th
8. at may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control Use the power tool accessories and tool bits etc in accordance with these instructions taking into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation Battery tool use and care 24 25 26 27 Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause burns or a fire Under abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns
9. efore installing or removing of the battery cartridge To remove the battery cartridge withdraw it from the tool while pressing the buttons on both sides of the cartridge To install the battery cartridge hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place Always insert it all the way until it locks in place with a little click If not it may accidentally fall out of the tool causing injury to you or someone around you Do not use force when installing the battery cartridge If the cartridge does not slide in easily it is not being inserted correctly Battery protection system The tool is equipped with a battery protection system This system automatically cuts off power to the motor to extend battery life The tool will automatically stop during operation if the tool and or battery are placed under one of the following conditions Overloaded The tool is operated in a manner that causes it to draw an abnormally high current In this situation release the trigger switch on the tool and stop the application that caused the tool to become overloaded Then pull the trigger switch again to restart Low battery voltage The remaining battery capacity is too low and the tool will not operate If you pull the switch trigger the motor runs again but stops soon In this situation remove and recharge the battery Switch action 1 Lock off button 2 Lock off leve
10. es before proceeding with a fresh battery MAINTENANCE ACAUTION Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance Never use gasoline benzine thinner alcohol or the like Discoloration deformation or cracks may result To maintain product SAFETY and RELIABILITY repairs any other maintenance or adjustment should be performed by Makita Authorized Service Centers always using Makita replacement parts OPTIONAL ACCESSORIES NCAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons Only use accessory or attachment for its stated purpose If you need any assistance for more details regarding these accessories ask your local Makita Service Center Recipro saw blades Jig saw blades only for Model JR102D Various type of Makita genuine batteries and chargers Plastic carrying case NOTE Some items in the list may be included in the tool package as standard accessories They may differ from country to country 11 Makita Corporation 885069B3 www makita com
11. ngled cords increase the risk of electric shock 8 When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock 9 If operating a power tool in a damp location is unavoidable use a ground fault circuit interrupter GFCI protected supply Use of an GFCI reduces the risk of electric shock Personal safety 10 11 12 13 14 15 16 Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance
12. r 3 Switch lever 4 Switch trigger ANCAUTION Before installing the battery cartridge into the tool always check to see that the switch lever trigger actuates properly and returns to the OFF position when released To prevent the switch lever trigger from accidentally pulled the lock off lever button are provided To start the tool pull either switch lever or trigger For the switch lever pull the lock off lever and then pull the switch lever to start the tool For the switch trigger depress the lock off button and then pull the switch trigger to start to the tool The lock off button can be pressed from either right or left The tool speed is increased by increasing pressure on the switch lever trigger Release the switch lever trigger to stop NOTICE Do not pull the switch lever trigger hard without pulling the lock off lever button This can cause switch breakage Lighting up the front lamp 1 Lamp ACAUTION Do not look in the light or see the source of light directly Pull the switch lever trigger to light up the lamp The lamp keeps on lighting while the switch lever trigger is being pulled ASSEMBLY ACAUTION Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool Installing or removing the saw blade NCAUTION Always clean out all chips or foreign matter adhering to the blade blade clamp and or slider Failure to do so may cause
13. r the blade to come to a complete stop before removing the blade from the workpiece Do not touch the blade or the workpiece immediately after operation they may be extremely hot and could burn your skin Do not operate the tool at no load unnecessarily Always use the correct dust mask respirator for the material and application you are working with Some material contains chemicals which may be toxic Take caution to prevent dust inhalation and skin contact Follow material supplier safety data SAVE THESE INSTRUCTIONS WARNING DO NOT let comfort or familiarity with product gained from repeated use replace strict adherence to safety rules for the subject product MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1 Before using battery cartridge read all instructions and cautionary markings on 1 battery charger 2 battery and 3 product using battery 8 9 Do not disassemble battery cartridge If operating time has become excessively shorter stop operating immediately lt may result in a risk of overheating possible burns and even an explosion If electrolyte gets into your eyes rinse them out with clear water and seek medical attention right away lt may result in loss of your eyesight Do not short the battery cartridge 1 Do not touch the terminals with any conductive materi
Download Pdf Manuals
Related Search