Home

Intuos4 User`s Manual for Windows & Macintosh

1. CUSTOMIZING TILT SENSITIVITY Select the PEN tab Tilt sensitivity determines how far you must tilt the tool to produce the maximum tilt effect you need to tilt the pen less at high sensitivity than at low sensitivity Pen Tilt Sensitivity Double Clickee Drag the slider to increase or 7 ESADE IEE oa decrease TILT SENSITIVITY Then test F i the new setting in an application Normal High ERN m that supports tilt The tilt setting gt Right Click applies to both the tip and eraser of Tip Feel your tool Note Tilt is direction sensitive and eoo a a a fip Double Click Distance can be used in some Soft Firm f applications to control brush orientation or other Details E 8 amp characteristics 3 Le Off Large Current Pressure Click Full Click Default Visit Wacom s web site for a list of applications that currently support tilt See product information CUSTOMIZING THE OPTIONAL MOUSE Use the Intuos4 Mouse to open the Wacom Tablet control panel The MOUSE tool will be selected in the TOOL list and the appropriate tabs will be displayed If the mouse is not automatically selected choose it from TOOL list Select a tab and choose from the available options The mouse is an optional accessory and product configurations may vary Mouse mode settings AA Photoshop A Customizing the mouse buttons lication specific settings Contents Index int Uos Contents professional pen table
2. Your index finger should operate the wheel independently of the pressure you apply to the tip DD Replaceable nib The optional Intuos4 Art Pen responds to the pressure tilt and rotation you apply to the pen Eraser Does not support rotation Side switches The default settings are The Art Pen supports 360 degrees of rotation around the pen axis As you draw within an application that supports rotation sensitivity simply twist the Art Pen to create lines that narrow or broaden For example while painting you can vary the rotation of a non circular brush to change the stroke thickness Depending on the brush shape characteristics you have selected in your application you can simulate calligraphy pens broad felt tip markers and any other non circular brushes or tools Upper DOUBLE CLICK Lower RIGHT CLICK Replaceable nib Important When the Airbrush or Art Pen is not in use lay it flat on your desk To maintain the sensitivity of your tool do not store it in a container where it will rest on its tip or eraser Leaving an Intuos4 tool on the tablet may interfere with screen cursor positioning when using other pointing devices See product information to learn more about which applications currently support the Airbrush fingerwheel or Art Pen rotation See ordering parts and accessories for information on where to purchase an Intuos4 Airbrush or Art Pen Content Ind ne w 2 Intuos cont
3. Contents Index a le lt D 37 int Uos Contents professional pen tablet ADJUSTING TIP FEEL AND DOUBLE CLICK Select the PEN tab Pen Tilt Sensitivity Ss Double Click Customizes the amount of pressure ae Ta needed to click draw or ink Normal High Right Click z Tip Feel Displays the tip FEEL DETAILS dialog co it an i Tip Double Click Distance box where you can further azi a A customize the tip sensitivity Details eg ee Current Pressure sole Click Full Click Default Press the pen tip on the tablet to Adjusts the size of the double click test the TIP FEEL setting Adjust the area Drag the slider to OFF to TIP FEEL so that you can disable double click assist comfortably reach full pressure Tips Use a soft TIP FEEL to reach the full pressure range with a lighter touch In some applications a soft pressure setting can make the pen overreact any small press on the pen is magnified on the screen If you experience this try a firmer TIP FEEL setting To make double clicking easier expand the tap area that accepts a double click the double click distance A large double click distance may cause a delay at the beginning of brush strokes in some drawing applications This may also cause a delay at the beginning of a drag action or inking stroke If you notice such effects try setting a smaller double click distance or using the side switch to double click see using the side switc
4. professional pen tablet UNINSTALLING THE SOFTWARE Follow the appropriate procedure below to remove the Wacom tablet driver software from your system Important When you remove the Wacom tablet software from your system your Wacom tablet will no longer operate with full tablet functionality but will continue to function as a mouse device Windows 7 and Vista Click on the Windows START button and choose CONTROL PANEL In the CONTROL PANEL window click on UNINSTALL A PROGRAM In the dialog box that appears choose WACOM TABLET Click UNINSTALL and follow the prompts to remove the tablet driver If prompted enter your administrator login name and password Be sure to restart your computer after uninstalling the software Windows XP or XP x64 Click START In the start menu select CONTROL PANEL Then select ADD OR REMOVE PROGRAMS In the ADD OR REMOVE PROGRAMS window choose WACOM TABLET and click on the REMOVE button Follow the prompts to remove the tablet driver Be sure to restart your computer after uninstalling the software Macintosh From the GO menu choose APPLICATIONS and open the WACOM TABLET folder Double click on the WACOM TABLET UTILITY icon and select the TABLET SOFTWARE REMOVE button Enter your administrator login name and password After the removal is completed click OK Be sure to restart your computer after uninstalling the software Note To fully remove the Intuos4 Wireless tablet from your computer you wi
5. e Driver version number See the Intuos installation CD or click on the Wacom Tablet control panel ABOUT button e The make and model of your computer and operating system version number e A list of peripheral devices attached to your computer e The software application and version you were using when the problem occurred e The exact wording of any error message that appeared on your screen e What happened and what you were doing when the problem occurred e How you tried to solve the problem You can also contact the Wacom Customer Care Center using our Email Inquiry form at http www wacom com productsupport email cfm Contents Index int Uos Contents professional pen tablet OBTAINING DRIVER DOWNLOADS Wacom periodically updates the tablet software driver to maintain compatibility with new products If you are having a compatibility problem between Intuos4 and a new hardware or software product it may be helpful to download a new Wacom tablet software driver when available from the Internet USA Canada Central and South America Worldwide Web http www wacom com productsupport Software updates Europe Middle East and Africa Worldwide Web http www wacom eu downloads Software updates Japan Worldwide Web http tablet wacom co jp download Software updates Japanese Asia Pacific English Worldwide Web http www wacom asia com Software updates English China Worldwide Web http www waco
6. Tap Press the side switch and tap the pen tip to the tablet to E S do a right click or other click function This is the default setting for Tablet PCs Mouse Handedness Right Changes the button orientation on mouse and Hover click Left cursor devices CLICK amp TAP to enable the Precis placement of click Sets the brightness of the status light and ExpressKey displays on Intuos4 functions When selected tablets you must first press the side 5 switch then touch the pen l l tip to the tablet surface in NXN off Dim Bright order to perform the click Pressure Compatibility function g Adjusts the pen pressure for compatibility with older applications that only support 1024 pressure levels ExpressKey Display Brightness 4 Click tap J Show wireless tablet battery status in system tray Default Cancel MOUSE HANDEDNESS options change the button orientation on the Intuos4 Mouse for right or left handed use Use the EXPRESSKEY DISPLAY BRIGHTNESS options to set the brightness of the Touch Ring status LEDs and ExpressKeys display on all connected Intuos4 tablets When the slider is in the left most position the Touch Ring status LED brightness is set to low and the ExpressKeys display is off See also optimizing the ExpressKeys display The pen tablet power saving mode will automatically change the brightness of the Touch Ring status LEDs and ExpressKeys display as follows 1 minute no user input Low brig
7. or less Pressure levels 2048 levels Eraser tip travel 2 0 mm 0 08 in approximately Physical size L x D 156 5 x 14 9 mm 6 17 x 0 59 in Weight 17 g 0 60 oz approximately INTUOS4 MOUSE MODEL KC 100 Physical size L x D x H 102 9 x 61 8 x 38 6 mm 4 05 x 2 43 x 1 52 in Weight 83 g 2 9 oz approximately Button stroke Less than 1 3 mm 0 05 in approximately Fingerwheel type Rotation 24 steps per revolution The mouse is an optional accessory and product configurations may vary INTUOS4 AIRBRUSH MODEL KP 400E 01 Pen tip travel 0 2 mm 0 008 in or less Fingerwheel travel 10 mm 0 39 in Fingerwheel resolution 1024 levels approximately Pressure levels 2048 levels Eraser tip travel 1 5 mm 0 06 in approximately Physical size L x W x D 162 5 x 17 5 x 32 5 mm 6 40 x 0 69 x 1 28 in Weight 23 0 g 0 81 oz approximately The Airbrush is an optional accessory Content Ind ne w A int Uos Contents professional pen tablet taap INTUOS4 INKING PEN MODEL KP 130 01 Pen tip travel 0 2 mm 0 008 in or less Pressure levels 2048 levels Physical size L x D 151 5 x 12 5 mm 5 97 x 0 49 in Weight 12 g 0 42 oz approximately The Inking Pen is an optional accessory INTUOS4 ART PEN MODEL KP 701E 01 Pen tip travel 1 0 mm 0 04 in or less Pressure levels 2048 levels Eraser tip travel 2 0 mm 0 08 in approximately Barrel rotation 360 degrees Physical size L x D 156 3 x 15 9 mm 6 16 x 0
8. s eraser to the tablet the SWITCHES state and PRESSURE value should change Pressure should change from approximately 0 with no pressure applied to approximately 100 when full pressure is applied e For the Airbrush move the fingerwheel forward the WHEEL value should decrease to a value of approximately O when the fingerwheel is all the way forward Move the fingerwheel backward the WHEEL value should increase to approximately 1000 when the fingerwheel is all the way back 4 Test tilt for the x axis by moving the pen from a vertical position toward the right the X TILT value should change from approximately 0 to 60 Now move the tool to the left of vertical the X TILT value should change from approximately O to 60 5 Test tilt for the y axis by moving the pen from a vertical position toward the bottom of the tablet the Y TILT value should change from approximately 0 to 60 Now move the tool toward the top of the tablet the Y TILT value should change from approximately O to 60 6 If you are testing an Art Pen test pen rotation by holding the pen vertically and twisting it around its axis The displayed ROTATION value should change 7 When you are done click on the CLOSE button to exit the dialog box Content Ind ee a int Uos Contents professional pen tablet TESTING THE TOUCH RING 1 With the DIAGNOSTICS dialog box open observe the TABLET INFO column as you test the tablet Touch Ring If you have
9. two pens Touch Ring The customizable control ring located on your professional pen tablet Transceiver A radio device capable of both transmitting and receiving information USB Universal Serial Bus A hardware interface standard for connecting computer peripheral devices USB ports support hot plugging which allows you to disconnect a USB device without turning off your computer Wintab An interface standard used by Windows applications for receiving tablet information Intuos4 supports all Wintab compatible applications under Windows Contents Index int Uos Contents professional pen tablet About the manual Accessories and parts available ordering Active area understanding Adding a new tool Airbrush holding replacing the tip using applications using integrated Application specific settings changing creating removing Art Pen using Battery activation charging life information management replacing status light warnings Bluetooth connection optimizing Button functions Care for tools and tablet Cautions CE declaration Clicking how to Connecting wirelessly Connection optimizing problems troubleshooting USB Connection light Contents INDEX 97 96 21 60 90 84 90 88 61 62 62 62 90 11 11 82 10 83 14 102 18 51 83 103 100 26 15 18 70 18 14 Index Control panel features lists opening tabs Customizing double click eraser feel advanced ExpressKeys mo
10. with multiple monitors MONITOR Maps the entire area of a single monitor that you choose If more than one monitor is connected to your system an option will be available for each detected monitor PORTION Selecting PORTION brings up the PORTION OF SCREEN dialog box Portion of Scree Choose one of the following three ways to define Portion of Choose a method for defining a Screen portion of the display L Drag Handies Position Rectangle For Screen e Drag corners of the foreground graphic to select the screen area e Select the CLICK TO DEFINE SCREEN AREA button and move the screen cursor to select the screen area Be sure to follow any MESSAGE 2 Select Area with Screen Cursor prompts Click to Define Screen Area d Enter coordinate values 3 Enter Coordinates in Pixels After defining a portion of the screen Top 0 Bottom 1199 you may need to use a different input Lene 0 Right 1919 device to access other portions of the screen area Message Cancel Content Ind ne m a int Uos Contents professional pen tablet FORCE PROPORTIONS In the MAPPING tab check or uncheck the FORCE PROPORTIONS box to determine the tablet to screen mapping relationship When FORCE PROPORTIONS is unchecked the correct scale or proportions are not maintained The selected tablet area is mapped to the selected display area Drawing a circle on the tablet may create an ellipse on the display screen This
11. your computer or to a powered USB hub Be sure to turn on the tablet power switch The tablet is fully functional when connected to your computer The tablet battery charges through the cable Note Whenever the tablet is connected using the USB cable the Bluetooth antenna and any Bluetooth connection to the tablet will be automatically switched off Always be sure to use the USB cable that came with your Intuos4 Wireless tablet Sa Ss SSS a a ar CT Ss a 72S a ar OSES LIO o LI KA Contents Index int Uos Contents professional pen tablet BEFORE YOU GET STARTED This section provides information that will help you work more comfortably with the tablet and to better understand how you and the tablet interact with your computer Ergonomics Configuring the tablet orientation Understanding the tablet active area Working with multiple monitors ERGONOMICS To minimize fatigue comfortably organize your work area Position your tablet input tools and keyboard for easy access without unnecessary reaching Adjust your monitor so you can view it comfortably with a minimum of eyestrain For best results position the tablet so the screen cursor follows the same direction as your hand movements on the tablet e Take short breaks between tasks to stretch and relax your muscles e Use a gentle grip when working with your tools e Alternate tasks and tools throughout the day e Maintai
12. 63 in Weight 20 g 0 7 oz approximately The Art Pen is an optional accessory INTUOS4 CLASSIC PEN MODEL KP 300E 01 Pen tip travel 1 0 mm 0 04 in or less Pressure levels 2048 levels Eraser tip travel 2 0 mm 0 08 in approximately Physical size L x D 150 7 x 12 2 mm 5 94 x 0 48 in Weight 12 g 0 42 oz approximately The Classic Pen is an optional accessory Contents Index aap INEUOS oenen TEET PRODUCT INFORMATION To learn more about Intuos4 and about which software applications are currently tablet enhanced to support the pressure sensitivity tilt sensitivity eraser and other special functionality of your professional pen tablet and tools visit the Wacom web site for your region USA Canada Central and South America http www wacom com productinfo Europe Middle East and Africa http www wacom eu Japan http tablet wacom co jp Asia Pacific English http www wacom asia com China Simplified Chinese http www wacom com cn Korea http www wacomkorea com Taiwan http www wacom com tw Thailand http www wacom thai com ORDERING PARTS AND ACCESSORIES Your Intuos4 professional pen tablet is the ultimate master tool for creative professionals The tablet combined with your Intuos4 Grip Pen and other available Intuos4 tools enables you to paint more intuitively illustrate better and edit imagery faster than ever before To expand the feature set of your Intuos4 product look over
13. ADVICE GIVEN BY WACOM ITS DEALERS DISTRIBUTORS AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE WACOM LIMITS THE DURATION OF ANY LEGALLY IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE TO THE DURATION OF WACOM S EXPRESS WARRANTY SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU NEITHER WACOM NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT CONSEQUENTIAL OR INCIDENTAL DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION AND THE LIKE ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT EVEN IF WACOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU In the event that any of the above limitations are held unenforceable Wacom s liability for any damages to you or any party shall not exceed the purchase price you paid regardless of the form of any claim This Limited Warranty is governed by the laws of the United S
14. ExpressKeys display pen Shows the current ExpressKey settings D Contents Index int Uos Contents professional pen tablet USB charging cable To charge Intuos4 first plug the USB charging cable into the tablet Connect the other cable end to a USB port located directly on your computer or to a powered USB hub See charging the battery You can work while charging See USB data connection Power switch and indicator Slide switch to turn tablet on and off Indicator shows red when the switch is in the on position Switch must be in the on USB port position to use tablet Power input and data connection Battery compartment Pairing button With your fingernail press inward on the See establishing a Bluetooth connection latch bar and flip cover outward to open Anchor point The Intuos4 pen tether sold separately or aftermarket security cables can be connected to the anchor point N P Pen holder location Rechargeable Lithium ion Li lon battery Cover unsnaps for easy removal Pre installed To activate see battery and attachment of the optional activation See also charging the battery pen holder Pen holder attachable Contents Index int Uos Contents professional pen tablet INTUOS4 PEN All Intuos4 input tools are cordless and battery free Pen stand Unscrew the base to access a nib extraction tool and assorted replacement nibs Eraser Gr
15. Intuos4 pen There are different ways to launch the Input Panel e Click on the Input Panel icon which appears when you move the screen cursor into a text entry area e Click on the Input Panel tab located by default on the left edge of the display screen e Click on the Tablet PC Input Panel icon located on the Windows task bar If the icon is not visible right click on the task bar select TOOLBARS and TABLET PC INPUT PANEL To customize the Input Panel 1 First open the Input Panel and then click on TOOLS in the menu bar 2 Select OPTIONS to open the Input Panel Options dialog box 3 Customize the Input Panel settings for the way you like to work To learn more about using your Intuos4 pen in Microsoft Windows and Office 2007 or later study the documentation that came with your system and Microsoft Office applications Be sure to take advantage of the Windows training tools including the Tablet PC tutorial available from Microsoft You can also visit our web site at www wacom com vista for more information on working with your Intuos4 pen in Windows Content Ind ee a INTUOS professional pen tablet Contents taap PRODUCT SPECIFICATIONS INTUOS4 WIRELESS TABLET MODEL PTK 540WL Technology Function display Active area W x D Physical size W x D x H Weight Aspect ratio Coordinate resolution Accuracy pen Accuracy mouse Tilt range all pens Reading height Maximum report rate ExpressKeys strok
16. Norway Jersey Switzerland Russia Ukraine Croatia Serbia Tunisia Turkey Syria Lebanon Jordan Israel Egypt United Arab Emirates Iran or South Africa The granting of this limited warranty is subject to the laws of the Federal Republic of Germany However the applicability of the United Nations Convention on Contracts for the International Sale of Goods is explicitly excluded Krefeld is the sole place of jurisdiction for all claims arising from this contractual relationship and all disputes between the parties resulting from the formation handling or termination of the contractual relationship provided that the customer is a trader a legal entity under public law or a special fund under public law The jurisdiction agreement shall also apply for customers who do not have a general place of jurisdiction in Germany The jurisdiction agreement shall not apply if due to legal provisions a different sole place of jurisdiction must be established for the case Furthermore WACOM is authorised to file a lawsuit against the headquarters of the customer Should one of the provisions of these limited warranty conditions be or become void the validity of the other provisions shall not be affected in full or in part Should a provision be invalid the legally permissible regulation most closely resembling the invalid regulation shall apply in its place If you have any questions about this agreement or would like to contact WACOM for another
17. Replacement nibs e 5 standard nibs black 1 flex nib white and black e 1 stroke nib white e 3 hard felt nibs gray 2 Clasp the old nib with the nib extraction tool pair of tweezers needle nosed pliers or similar instrument and pull it straight out of the pen 3 Slide the end of the new nib straight into the barrel of the pen Firmly push the nib until it stops 4 Pen nib 1 mm 0 04 inch or less Note Stroke nibs are spring loaded providing additional tactile feedback when you are working with the Intuos4 pen or Airbrush They are installed in the same manner as a standard pen nib A Warning Choking hazard Prevent children from swallowing the pen nib or side switch The pen nib or side switch may accidentally be pulled out if children are biting on them To order replacement parts see available parts and accessories Important When the pen is not in use place it in the pen stand or lay it flat on your desk When the optional Airbrush is not in use lay it flat on your desk Leaving the pen on the tablet can prevent the tablet from switching off and cause the battery to discharge To maintain the sensitivity of your input tools do not store them in a container where they will rest on their tip or eraser If you find it inconvenient to use the desktop pen stand you can also attach the pen holder to the tablet and place the pen in the holder loop for safe keeping Content Ind ne w d int Uos Contents
18. Switching users Fast User Switching Placing the system in sleep mode Changing the MAPPING or DISPLAY TOGGLE tab settings Changing the resolution or number of displays on your system Using the MODE TOGGLE function Selecting PEN MODE or MOUSE MODE from the Radial Menu Tip To toggle between monitors without including the full display option disable the first display on the DISPLAY TOGGLE tab Then go to the MAPPING tab and set the current SCREEN AREA to the first display Contents Index a D int Uos Contents professional pen tablet WORKING WITH MULTIPLE TOOLS The Wacom Tablet control panel is designed to help you customize and keep track of the settings for your Intuos4 tools The tool you use to open the control panel is automatically selected and the appropriate tabs for that tool are displayed Select a tool to change its settings The TOOL list displays an icon for the tablet Tablet pa FUNCTIONS and the different Intuos4 WL tools that have been used a a on the tablet Tool lt Functions Grp Pen Mouse lia Removes the ee D ra selected tool If ee Application A gt The button is se pie ere ae Al inactive when there displayed and the tool Pen Eraser Mapping oe one item in settings apply to all l applications Tab settings apply only to the The FUNCTIONS selected tool and application ae be To add a different tool to the co
19. a le lt D 56 int Uos Contents professional pen tablet USING AND CUSTOMIZING THE RADIAL MENU The Radial Menu is a circular pop up menu that provides quick access to editing navigation media control functions and more e To display the Radial Menu set a tool button or ExpressKey to the RADIAL MENU function Whenever you press that button the Radial Menu is displayed centered at the screen cursor position Top menu e The hierarchical Radial Menu appears in circular format extending over the entire desktop Each level of the menu consists of eight control slices which may contain various features and options to choose from e Select an option by clicking on it within the Radial Menu Some selections may display a submenu where you can then choose from the available options Holding down the button that opens the Radial Menu allows you to click on a menu item without closing the Radial Menu oe T Ax e T e The menu closes after you make a selection ENEEEE ENNEN To close the Radial Menu without making a selection click on the X located at the center of the menu or on a control slice that has no function assigned to it You can also again press the button used to display the menu Submenu Use the RADIAL MENU tab to customize the available functions on the Radial Menu 1 Select a menu or submenu to Radial Menu customize SRT Op Cm d Function Media Submenu 2 Select a contro
20. battery status light glows green the battery is charged if it glows red the battery charge is low If your battery charge is low plug in the USB cable With the USB cable properly connected the battery status light will glow yellow when charging and a steady green when fully charged e lf the tablet wireless connection light glows a steady blue your Bluetooth connection is working Otherwise it is not Open the Bluetooth control panel and make sure the tablet was not disconnected If not disconnected see step 3 following e Switch the tablet power off then back on e Reset the tablet by disconnecting both the battery and the USB cable if in use for at least 10 seconds Then reconnect the tablet battery and try again D Content Ind ne w d 3 2 oS oS p Int professional pen tablet UOS Contents If necessary troubleshoot the Bluetooth connection as follows Move the tablet closer to the antenna Make sure there are no metal or other high density obstructions in the line of sight between the tablet and Bluetooth antenna If you are using a computer with a built in Bluetooth module ensure it is enabled and working If using a USB to Bluetooth adapter dongle be sure it is plugged into an active USB port on your computer and working Verify your Bluetooth support is working properly Test the functionality with a different Bluetooth enabled device or check the documentation that came with your Bluetooth s
21. in connection with this product and for the correct operation of the product This licence may only be assigned to a third party in connection with this product Use of this software includes the creation of permanent or temporary copies of the software by means of loading displaying exporting transferring or saving for the purposes of exporting the commands and the data they contain or for observing researching or testing the software functions The customer may not license the software to a third party lease lend or in any other way provide access to the software The customer may not copy change transfer or edit the software without prior written agreement from WACOM The only exceptions to this are necessary procedures for creating a back up copy and the scenarios outlined in section 2 The customer may not carry out any reverse engineering decompile or depacketise the software or try by any other means to discover the source code of the software This restriction shall continue to apply after the termination of this agreement If the software contains interfaces to other programs that are not supported by WACOM WACOM shall provide the customer with the necessary information on request as long as the customer can prove his right to use the software and agrees to bear the copying and postage costs WACOM AND ITS SUPPLIERS CANNOT OFFER ANY GUARANTEE FOR THE PERFORMANCE OF THE SOFTWARE OR FOR THE RESULTS PRODUCED THERE FROM WACOM AND
22. is the default setting for all tools When FORCE PROPORTIONS is checked the correct vertical and horizontal proportions are maintained Drawing a circle on the tablet results in a circle on the display screen Depending on your settings some portions of the tablet active area may no longer be usable when this option is selected T Note Although Intuos4 is optimized for use with 16 10 aspect ratio displays the default settings automatically adjust for use with other aspect ratio displays TABLET AREA In the MAPPING tab use the TABLET AREA options to define the tablet area that will be mapped to the screen area FULL The entire active area of the tablet is mapped This is the default setting PORTION Selecting PORTION brings up the PORTION OF TABLET dialog box Choose one of the following three ways to define Portion of Tablet o 1 Drag Handles Choose a method for defining a portion of Position Rectangle For Tablet the tablet e Drag corners of the foreground graphic to select the tablet area that will be mapped to your selected screen area e Select the CLICK TO DEFINE TABLET AREA button and use your tool on the tablet 2 Select Area with Tool to select the tablet area Be sure to Click to Define Tablet Area follow any MESSAGE prompts 3 Enter Coordinates in Counts e Enter coordinate values Top 0 Bottom 25399 Left 0 Right 40639 Message Cancel Contents Index I
23. keystroke combination in the KEYS entry box Keystroke combinations can include letters numbers function keys Such as F3 and modifier keys Such as SHIFT ALT or CTRL for Windows or SHIFT OPTION COMMAND and CONTROL for Macintosh You can also select special keystrokes or keystroke combinations from the ADD SPECIAL drop down menu After defining a keystroke sequence click OK Important Because the ENTER Windows and RETURN Macintosh keys can be selected as a defined keystroke they cannot be used to select OK You must use your Intuos4 tool to click on the OK button If prompted enter a name for the keystroke definition The name will be displayed with the respective control or in the Radial Menu as applicable You can create different keystroke functions for different applications See application specific settings Keys Use your pointing device to click OK to accept or Cancel to exit Deletes only the last entry in the keystroke entry box Add Special Clears the keystroke entry box e Cancels When defining keystrokes for the Touch Ring or mouse fingerwheel Use your pointing device to move between the boxes and the dialog box provides two KEYS entry boxes Assign keystroke functions as described above for clockwise and counter clockwise movement on the ring or front and back movement of t Add Special v the mouse fingerwheel Keys Cancel Enter a NAME for the def
24. more than one tablet connected to your system be sure you have selected the tablet you are testing from the TABLET INFO column 2 Slide your finger around the entire circumference of the Touch Ring As you touch and move your finger along the Touch Ring a LEFT TOUCH number will indicate your current finger position on the Touch Ring 3 Press the Touch Ring toggle button to toggle between the four customizable states As you cycle between settings a corresponding LED should illuminate Within the DIAGNOSTICS dialog box the button state is also shown as LEFT BUTTONS If any of the functions are set to SKIP the corresponding LED will be skipped in the toggle sequence 4 When you are done click on the CLOSE button to exit the dialog box Important Remember that some applications can override and control the Touch Ring functions Consider closing any open applications except the Wacom Tablet control panel when testing the Touch Ring For details see using applications integrated for tablet control TESTING THE EXPRESSKEYS 1 With the DIAGNOSTICS dialog box open observe the TABLET INFO column as you test each ExpressKey If more than one tablet is connected to your system be sure you have selected the tablet you are testing from the TABLET INFO column 2 Test the keys on your tablet by clicking them one at a time Each time you press a key its number will be displayed next to the LEFT KEYS category 3 On the tablet itself verify a
25. professional pen tablet HOLDING THE PEN Hold the Grip Pen like you would a normal pen or pencil Adjust your grip so the side switch is in a convenient location where you can toggle it with your thumb or forefinger but not accidently press the switch while drawing or navigating with the pen Tilt the pen in any way that feels most comfortable Position for drawing and navigating Position for erasing Place the pen stand within easy reach of your tablet The stand allows for vertical or horizontal placement of the pen Important When not in use place the pen in the pen stand or lay it flat on your desk To maintain the sensitivity of your pen do not store the pen in a container where it will rest on its tip or eraser Leaving an Intuos4 tool on the tablet may interfere with screen cursor positioning when using other pointing devices or may prevent your computer from going to sleep Also leaving the pen on the tablet when can prevent the tablet from switching off and cause the battery to discharge O gt a N Your tablet also comes with an attachable pen holder The pen holder is a handy feature for those times when it is inconvenient to use the desktop pen stand The pen holder is optimized to securely hold the Grip Pen and optional Airbrush To attach the optional pen holder e Unsnap the pen holder cover and remove it from the tablet e Attach the pen holder in place of the cover part by snapping the pen
26. properties Customizing the pen Adjusting tip feel and double click Adjusting eraser feel Advanced tip and eraser pressure settings Customizing tool buttons Customizing tilt sensitivity Customizing the optional mouse Customizing the mouse buttons Customizing the tablet functions Customizing the ExpressKeys Customizing the Touch Ring Tablet to screen mapping Orientation Screen area Force proportions Tablet area Button functions Using and customizing the Radial Menu Working with Display Toggle Working with multiple tools Application specific settings Creating an application specific setting Changing application specific settings Removing application specific settings TROUBLESHOOTING Testing your tablet Testing your tools Testing a pen Testing the Touch Ring Testing the ExpressKeys Testing the optional mouse Troubleshooting tables Connection problems General problems Windows specific problems Mac specific problems 36 37 38 39 39 40 41 41 42 43 44 45 46 48 49 50 50 51 57 58 60 61 62 62 62 63 64 66 67 68 68 69 70 70 72 76 11 Contents INTUOS professional pen tablet Technical support options Obtaining driver downloads APPENDIX Tablet installation Battery life information Replacing the tablet battery Caring for your tablet and tools Replacing the pen tip Uninstalling the software Managing your tablet preferences Changing the tablet mode options Installing multiple tab
27. such marks by Wacom Co Ltd is under license Adobe Photoshop and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries Microsoft Windows and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries Apple the Apple logo and Macintosh are registered trademarks of Apple Computer Inc registered in the U S and other countries Any additional company and product names mentioned in this documentation may be trademarked and or registered as trademarks Mention of third party products is for information purposes only and constitutes neither an endorsement nor a recommendation Wacom assumes no responsibility with regard to the performance or use of these products ExpressKey is a registered trademark of Ginsan Industries Inc and is used with permission Contents Index a le lt D D int Uos Contents professional pen tablet MM Reuse recycling and recovery You are urged to recycle this product when replacing it with a newer product or when it has outlived its useful life by bringing it to an appropriate collection point for recyclable materials in your community or region By doing this you can help improve the environment of your community as well as minimize the potential negative effects created should any hazardous substance that may possibly be present within waste material reach the env
28. tag to remove it from between the battery and contact terminals Discard the tag 3 Close the battery cover Move on to charging the battery BS CHARGING THE BATTERY aS A Warning See the safety precautions for Lithium lon batteries Before using Intuos4 for the first time in wireless mode you should fully charge the tablet battery Do this by connecting the USB cable between Intuos4 and a primary USB port located directly on your computer or to a powered USB hub USB port The USB cable is used for charging the battery and to operate Intuos4 as a wired USB tablet The battery will charge whenever the USB cable is connected and the battery is not fully charged Note Whenever the tablet is connected using the USB cable the Bluetooth antenna and any Bluetooth connection to the tablet will be automatically switched off Contents Index Tips You can continue with the tablet software installation process and use Intuos4 through the USB connection while the battery is charging It will take about 5 hours to fully charge an empty battery when the tablet is off and about 6 hours to fully charge it when the tablet is on Actual charge time depends upon battery level and tablet use while charging Turning off the ExpressKeys display will reduce the charging time when using the tablet while it is charging See advanced options for information on turning the ExpressKeys display on or off The battery status li
29. that the battery status light is on and that the Bluetooth wireless connection is active If your tablet is connected using the provided USB data cable verify that the USB cable is properly connected to the tablet and to an active USB port Be sure the tablet USB cable is plugged into a primary USB port directly into your computer or into a powered USB hub If connecting to a powered USB hub device make sure the hub is connected to an active USB port and that the hub is active Try also connecting to another USB port or using another USB cable Make sure the tablet is plugged into a primary USB port on your computer or into a powered USB hub attached to your computer D Index INTUOS professional pen tablet Contents The tablet charging process seems to stop whenever the computer enters sleep mode When using the pen to operate the Touch Ring the Touch Ring does not work well The pen works only in MOUSE MODE and does not draw or ink with pressure sensitivity The pen does not draw or ink with pressure sensitivity Clicking is difficult Double clicking is difficult The pen selects everything will not stop selecting The eraser selects everything or will not stop erasing Contents As required adjust your system power or energy saver settings so that the computer does not enter sleep mode while the tablet is charging The Touch Ring is designed to be used with your finger and does not
30. the available parts and accessories described on the following pages Please note that not all parts and accessories are available in all regions To purchase parts and accessories refer to the tablet Read Me file and see who to call for your region You can also do the following e To purchase parts and accessories in the USA or Canada call 1 888 884 1870 toll free or visit Wacom s web site at http www WacomDirect com USA only e To purchase parts and accessories in Europe call 49 0 180 500 03 75 or send an email to Spareparts wacom eu Or visit http shop wacom eu You can also contact your local dealer distributor or technical support using the appropriate number for your region e To purchase parts and accessories in Australia Singapore Taiwan and Korea please visit www BuyWacom com au www BuyWacom com sg www BuyWacom com tw and www BuyWacom co kr respectively e Jo purchase parts and accessories in other countries please contact your local dealer or distributor Content Ind me m a INTUOS Contents f l lt 97 professional pen tablet AVAILABLE PARTS AND ACCESSORIES Intuos4 Grip Pen KP 501E 01 Sensitive to pressure and tilt the Grip Pen is an all purpose tool for drawing erasing and mouse operations The easy to use DuoSwitch gives you two programmable switch functions The pressure sensitive pen has an ergonomically waisted grip area optimum weight and balance and superior tip sensi
31. to SHOW SETTINGS and press the key at any time Contents Index int Uos Contents professional pen tablet CREATING AN APPLICATION SPECIFIC SETTING First choose the tablet and tool for which you want to create an application specific setting Then click on the APPLICATION list s button to display the ADD APPLICATION FOR CUSTOM SETTINGS dialog box Add Application for Cus Choose from one of two methods to select an application Select Application e Open the application for which you want to create Sere pen Appications custom settings and then select that application from the CURRENTLY OPEN APPLICATIONS box e BROWSE to select the executable file of any application installed on your computer Photoshop Painter X Your selection is added to the SELECTED APPLICATION box where the name of the selected application is displayed Click OK to complete the process Note If two programs have the same executable file name they will share the same customized settings After adding an application its icon appears in the APPLICATION list whenever the respective tool is selected in the TOOL list Select the application and then customize the control panel tab settings for your tool and the selected application Once you have created application specific settings applications that have not been customized in this manner will use the tool settings for ALL OTHER Tip First customize settings for one application Whe
32. when the USB cable is plugged in While using the tablet the tablet battery status light flashes red You want to connect the tablet using the provided USB data cable but the computer does not have an available USB port The tablet status LEDs are off An LED does not illuminate when using the pen mouse or Touch Ring toggle button After plugging in the tablet with a USB connection a message appears indicating that the USB device needs more power than is available Contents e Review Using the Grip Pen to be sure you are using the tool correctly e Switch the tablet power off then back on e lf your battery charge is low plug in the USB cable to a primary USB port located directly on your computer or to a powered USB hub e Reset the tablet by disconnecting both the battery and the USB cable for at least 10 seconds Then reconnect the tablet battery and try again Check that the cable is properly plugged into the tablet and that it is plugged directly into a powered USB port on your computer or a powered USB hub Try connecting the tablet to a different powered USB port The battery may need replacement The battery is nearly empty Plug in the USB cable to continue working or power down the tablet Check if there is an available USB port on a powered USB hub If not available you will need to add a powered USB hub or USB card Be sure the tablet is turned on If your connection is wireless verify
33. with pen 25 Linking to computer 16 Positioning with pen 25 Macintosh specific problems troubleshooting 77 power management 10 Mapping to multiple monitors 22 Precautions 101 Mouse battery warnings 102 buttons customizing 42 Cautions 103 customizing 41 Warnings 101 fingerwheel Preferences managing tablet 85 customizing 42 Pressure sensitivity drawing with 28 using 89 Product information 96 testing 69 Proximity 25 using 89 Radial Menu Mouse Mode 47 customizing 57 Multiple using 597 monitors working with 22 Removing application specific settings 62 tablets installing 86 Screen area 49 New tool adding 60 Settings Nib replacing 84 changing application specific 62 Options advanced 87 creating application specific 62 removing application specific 62 Contents Index a le lt D 114 int Uos Contents professional pen tablet Side switch using 27 pen 67 Software tablets 64 driver downloads 80 tools 66 uninstalling 85 Touch Ring 68 Specifications product 93 Tilt Airbrush 94 drawing with 28 Art Pen 95 sensitivity customizing 41 Classic Pen 95 Tip feel Grip Pen 94 advanced 39 Inking Pen 95 customizing 38 Intuos4 Wireless tablet 93 Tool buttons customizing 40 mouse 94 Tools Tablet testing 66 area 50 working with multiple 60 battery activation 11 Touch Ring battery and power management 10 customizing 45 battery status light 14 testing 68 charging the battery 11 using 32 connecting to your computer 16 Troubleshooting cus
34. with the enhanced digital mark up and inking tools available in Microsoft Office 2007 or later applications running on Windows 7 or Vista Found on the Review tab within applicable applications these tools provide a consistent set of inking options For quick access you can add specific inking tools to the Quick Access Toolbar located at the top of each application To make the most of the pen in Microsoft Windows be sure to study the documentation that came with your system including the Windows training tools and Tablet PC tutorial You can access the Tablet PC Pen Training from the START menu by choosing ALL PROGRAMS TABLET PC and TABLET PC PEN TRAINING Note The following workarounds in the Wacom tablet driver improve drawing performance in Windows 7 and Vista e The Pen Flicks and press and hold to right click features are disabled in graphics applications using the Wintab API e There is no pressure sensitivity in Journal and other Ink features when both the Flicks and press and hold to right click features are disabled in the Vista PEN AND INPUT DEVICES control panel Pen features supported in all versions of Windows 7 and Vista except Windows 7 Starter and Home Basic and Windows Vista Home Basic Contents Index INtTUOS _ a l q D 92 ABOUT THE WINDOWS TABLET PC INPUT PANEL The Windows 7 or Vista Input Panel enables you to use handwriting or an on screen keyboard to directly enter text with your
35. 3 minutes and the wireless connection light will flash blue e Verify that your Bluetooth configuration supports Bluetooth with Human Interface Device HID profile e Make sure the tablet is not too far away from the antenna and that there are no metal obstructions between the Bluetooth antenna and the tablet Check for possible interference from other wireless devices such as from a cordless telephone or microwave oven If you suspect interference turn off the interfering device or move it farther away from your computer Try again linking the wireless tablet to the computer Be sure that you have correctly installed the Wacom tablet driver software See also optimizing the Bluetooth connection e Open the battery compartment and verify that the battery is properly installed e Check the battery appearance to ensure there is no leakage or other indication of damage e Charge the battery overnight and try again If the problem persists the battery may be completely discharged or damaged and can no longer hold a charge You will have to purchase a replacement battery from Wacom See ordering parts and accessories e Confirm the tablet is paired to your system D Index a INTUOS professional pen tablet Contents After switching on the tablet the battery status light remains on but the screen cursor cannot be moved with the pen GENERAL PROBLEMS The battery status light does not illuminate
36. ACOM must have determined at the conclusion of the contract based on the known risks and circumstances at that time Claims for reduced profits or expenses saved indemnity claims from third parties or claims for any other direct or consequential damages still cannot be asserted in this case The laws of the Federal Republic of Germany shall apply to this agreement However the applicability of the United Nations Convention on Contracts for the International Sale of Goods is explicitly excluded Krefeld is the sole place of jurisdiction for all claims arising from this contractual relationship and all disputes between the parties resulting from the formation handling or termination of the contractual relationship provided that the customer is a trader a legal entity under public law or a special fund under public law The jurisdiction agreement shall also apply for customers who do not have a general place of jurisdiction in Germany The jurisdiction agreement shall not apply if due to legal provisions a different sole place of jurisdiction must be established for the case Furthermore WACOM is authorised to file a lawsuit against the headquarters of the customer This licence constitutes the entire contractual agreement between the parties It overrides all other verbal and written contracts and agreements and may only be altered by means of a written and signed contract Should one of the provisions of these licence conditions be or become void t
37. Contents IntuOoS A professional pen tablet wireless User s manual for Windows amp Macintosh Intuos4 Wireless model PTK 540WL Before you start Wireless connection Using the pen Customizing your pen Using the tablet Customizing your tablet Using the Radial Menu Application specific settings Troubleshooting LUA COM Contents Index int Uos Contents professional pen tablet Intuos 4 Wireless User s Manual for Windows amp Macintosh Version 1 0 Rev L1709 Copyright Wacom Co Ltd 2009 All rights reserved No part of this manual may be reproduced except for your express personal use Wacom reserves the right to revise this publication without obligation to provide notification of such changes Wacom does its best to provide current and accurate information in this manual However Wacom reserves the right to change any specifications and product configurations at its discretion without prior notice and without obligation to include such changes in this manual The above year indicates when this manual was prepared However the date of release to the users of the manual is simultaneous with the introduction into the market of the applicable Wacom product Tool ID and DuoSwitch are trademarks and Intuos and Wacom are registered trademarks of Wacom Co Ltd The Bluetooth word mark and logo are registered trademarks and are wholly owned by the Bluetooth SIG Inc Any use of
38. DISPLAY TOGGLE and if it may have been activated accidentally See working with Display Toggle Verify that the SCREEN AREA in the MAPPING tab is set to FULL You can also use your pen to control the other monitors in MOUSE MobE To use MOUSE MODE first set a pen button to MODE TOGGLE Then use the button to toggle between PEN MODE and MOUSE MODE D Index e D INTUOS professional pen tablet Contents When working in some applications the ExpressKeys or Touch Ring perform a different function than what is set in the Wacom Tablet control panel The tablet is set to EXPRESSKEYS RIGHT or EXPRESSKEYS LEFT but at the log in screen the tablet seems to work upside down Some applications can override and control the ExpressKey and Touch Ring functions e When an ExpressKey is overridden by an application the ExpressKeys display will automatically update to show either the new function name or Application Defined e See using applications integrated for tablet control If you use application specific settings be sure you have updated the settings for the correct application Begin by uninstalling the software for the existing tablet driver Restart your computer Then reinstall the tablet driver from the Intuos installation CD and change the default orientation of the tablet See configuring the tablet orientation for details WINDOWS SPECIFIC PROBLEMS You suspect the tabl
39. ED does not glow then e Verify that the tablet power switch is in the on position e Make sure the USB cable is securely connected to the tablet and to an active USB port on your computer Intuos4 requires that you connect to a primary USB port located directly on your computer or to a powered USB hub e If you are connecting the tablet to a powered USB hub be sure the USB hub is properly connected to your computer and is active e Connect the tablet to a different powered USB port or try connecting to the powered USB port on another computer e fa status LED does not illuminate after your computer is on and has finished booting up your USB port may be disabled Verify that you have connected the tablet to an active USB port e For best results when troubleshooting no power to the tablet a status LED does not light plug the tablet directly into the system USB port located on your computer Temporarily eliminate any external hubs in use until you determine that the system recognizes the tablet and that it is functional When the tablet is working properly it is usually okay to then move the tablet to a powered USB hub 2 Check the tablet connection in wireless mode A tablet status LED will light whenever the tablet is properly connected and your computer has registered it as a Bluetooth enabled device If an LED does not glow then e Verify that the tablet power switch is in the on position e Check the battery power If the
40. ITS SUPPLIERS OFFER NO GUARANTEES OR ASSURANCES EITHER EXPRESSLY OR IMPLICITLY INCLUDING THOSE THAT MAY BE DERIVED FROM A BUSINESS RELATIONSHIP OR FROM TRADE PRACTICE OR FROM LEGAL PROVISIONS OR CUSTOMARY LAW WITH REGARD TO THE MARKETABILITY FREEDOM FROM DEFECTS OF TITLE OR USEFULNESS OF THE SOFTWARE WACOM AND ITS SUPPLIERS ACCEPT NO LIABILITY FOR DAMAGES CLAIMS OR COSTS OF ANY KIND NOR FOR CONSEQUENTIAL DAMAGES SECONDARY ACCIDENTAL INDIRECT OR PENAL DAMAGES PARTICULAR OR MISCELLANEOUS DAMAGES OR FOR DEMANDS OR INDEMNITY CLAIMS FOR REDUCED PROFITS OR LOSSES THIS SHALL ALSO APPLY IN THE CASE OF A REPRESENTATIVE OF WACOM BEING PREVIOUSLY AWARE OF THE POSSIBILITY OF SUCH LOSSES DAMAGES CLAIMS OR COSTS OR DEMANDS FROM THIRD PARTIES Contents Index A a D int Uos Contents professional pen tablet The existing limitations on liability shall not apply in the case of the assumption of explicit guarantees or in case of fraudulent behaviour on the part of WACOM nor for damages arising from wilful or grossly negligent behaviour on the part of WACOM from damages leading to loss of life personal injury or sickness or in the case of binding legal provisions For slight negligence WACOM and its suppliers shall only be liable in the event of a breach of essential contractual obligations Liability when such an essential contractual obligation is breached is however limited to damages typical to this type of contract which W
41. NTUOS professional pen tablet Contents BUTTON FUNCTIONS Clicks Keystroke Modifier Radial Menu Back Forward Pan Scroll Show Desktop Switch Application Open Run Pressure Hold Precision Mode Mode Toggle Erase Show Settings Tablet PC Application Defined Disabled Default FUNCTION NAME CLICKS CLICK RIGHT CLICK MIDDLE CLICK DOUBLE CLICK CLICK LOCK 4TH CLICK 5TH CLICK Contents Index a The following options are available for tool and tablet settings Not all options are available for all controls DESCRIPTION Simulates a primary mouse button click Be sure at least one button performs this function so you can always navigate and click Simulates a right mouse button click which displays a context menu Simulates a middle mouse button click Simulates a double click For easier double clicking use this function instead of tapping twice with the pen tip Simulates holding down the primary mouse button Press the tool button once to initiate click lock Press the button again to release click lock Click lock is useful for dragging objects or selecting blocks of text Simulates a 4th mouse button click Simulates a 5th mouse button click D leap int Uos Contents professional pen tablet FUNCTION NAME DESCRIPTION KEYSTROKE Enables you to simulate keystrokes Select this option to display the DEFINE KEYSTROKE dialog box Enter a keystroke or
42. RING tab the currently set Touch Ring functions are displayed You can customize the Touch Ring to issue zooming scrolling or custom keystroke actions Touch Ring functions can be defined for use with specific applications Any changes you make on this tab apply to the currently selected icon in the control panel s APPLICATION list The below control panel tab depicts a tablet configured for right handed EXPRESSKEYS LEFT use The SPEED setting can be customized for each function This controls the rate at which zooming and scrolling occurs or Toggle eae Speed the speed at which keystroke events are sent to an application Auto Scroll Zoom j Touch Ring Slow Fast l l Tip To zoom images around the current position of the screen iii m Keystroke eo s ao ooa oaoa cursor when working in Adobe Cycle Layers slow Fast Photoshop CS3 or later open the mna 2 Adobe Photoshop general Keystroke m hd a 2 a preferences pane check the ZOOM BrushSize oo Fasi WITH SCROLL WHEEL option and E click OK Keystroke m oo 2 a Canvas Rotation Slow Fast Defaut Choose a function to perform when the ring is in use Default settings are AUTO SCROLL ZOOM Sets the Touch Ring to zoom in most graphics applications and scroll in most other applications Page scrolling is not supported Move your finger clockwise along the ring to zoom in or scroll down Move your finger counter clockwise to zoom out or scr
43. TTINGS Displays a diagram on your display screen of the tablet ExpressKeys and Touch D Ring showing the current function settings for each control Contents Index a le lt D 55 int Uos Contents professional pen tablet FUNCTION NAME TABLET PC e TABLET PC INPUT PANEL e JOURNAL e TABLET PC DEFINED DISABLED APPLICATION DEFINED SKIP DEFAULT DESCRIPTION Tablet PCs and Windows 7 and Vista systems that support the Tablet PC Input Panel Opens the Tablet PC Input Panel when you press a tool button set to this function Windows 7 Vista and Tablet PC systems that include Microsoft Journal Opens Microsoft Journal Tablet PCs and Windows 7 and Vista systems that support the Tablet PC Input Panel Sets the button function according to settings found in the e Windows 7 and Vista TABLET PC SETTINGS and PEN AND INPUT DEVICES control panels e Windows XP Tablet Edition TABLET AND PEN SETTINGS control panel Disables the control function Reports only the button number to the application This is for applications such as CAD programs that have built in support for the Intuos4 Mouse This function may also be used by some highly integrated applications for direct control of the pen tablet ExpressKeys and Touch Ring Sets the Touch Ring toggle button to skip a function state that has been assigned this option in the toggle sequence Returns a control to its default setting Contents Index
44. XPRESSKEYS TOP Tablet is rotated 90 degrees clockwise with Touch Ring and ExpressKeys oriented toward the top EXPRESSKEYS RIGHT Tablet orientation is horizontal with Touch Ring and ExpressKeys located to the right When this option is selected the tablet operation and the Wacom Tablet control panel options are automatically configured for correct left handed use If you have an Intuos4 Mouse click the control panel OPTIONS button to set the device for right or left handed use See advanced options EXPRESSKEYS BOTTOM Tablet is rotated 90 degrees counter clockwise with Touch Ring and ExpressKeys oriented toward the bottom After making changes verify you have correctly set the orientation by moving your pen up on the tablet the screen cursor should move up as well The selected orientation is a global tablet setting and applies to all applications Note At the log in and user switching screens the tablet orientation will use the default orientation that was selected when the driver was installed If you want to change the default orientation you must reinstall the driver using the Intuos installation CD See configuring the tablet orientation Contents Index int Uos Contents professional pen tablet SCREEN AREA Use the MAPPING tab SCREEN AREA options to define the portion of the display screen to which your tablet will map FULL Maps the entire monitor s area This is the default setting See also working
45. ab select SINGLE CLICK TO OPEN AN ITEM POINT TO SELECT Double clicking Quickly tap the tablet twice in the same place with the pen tip This is like clicking twice with a mouse button Try double clicking on a folder icon to open it Tip Press the upper side switch to double click This is easier than tapping twice with the pen tip and is the preferred method of double clicking with a pen DRAGGING Dragging is used to select and move objects on the monitor screen First point to an object Then press the pen tip to the tablet and slide it across the tablet surface The selected object will move across the display screen To select text within a document move the screen cursor to the beginning of a text line then drag the pen across the tablet to highlight the text Content Ind ne w ad int Uos Contents professional pen tablet USING THE SIDE SWITCH The side switch on the Intuos4 Grip Pen has two programmable functions that can be selected by rocking the switch in either direction You can use the switch whenever the pen tip is within 10 mm 0 39 inch of the tablet active area You do not have to touch the pen tip to the tablet in order to use the switch The default switch positions are Upper DOUBLE CLICK Lower RIGHT CLICK Tip Press the upper side switch to double click This is easier than tapping twice with the pen tip Press the lower pen switch to right click and bring up applica
46. ape to insulate them from possible contact with metal objects e If the battery should leak do not get the fluid in your eye If battery fluid does enter the eye do not rub the eye Immediately rinse the affected eye with water and seek medical attention See also warnings and cautions Contents Index int Uos Contents professional pen tablet CAUTIONS Do not place or use this product on an unstable surface or workspace Do not place this product on a shaky inclined or vibrating surface It may drop or fall off causing damage to the product or human injury e When cleaning your pen tablet power off the unit by moving the power switch to the off position and unplugging the USB connector from between the pen tablet and your computer Electrical shock may occur if you attempt to clean this product when it is connected to your computer or to an after market power adapter e Do not apply heavy stress to the pen tip eraser or side switch It may shorten pen tip life or may cause the pen to malfunction e fa distorted or bent pen nib is used the pen tool may operate improperly Therefore do not apply excessive force when using the pen e Using a pen nib other than one specifically designed by Wacom for your pen input tool may cause product malfunction e Do not place metal objects on this product when it is in use Metal objects placed on the pen tablet during use may cause interference improper operation or product mal
47. ase refer to your product Quick Start Guide and to the automated software installer located on the Intuos installation CD for details If you are new to electronic documentation read navigating the manual e SMALL CAPITAL LETTERS are used to identify the names of keyboard keys dialog boxes and control panel options e You can use your viewer zoom in tool to increase the size of the manual on your display screen e The following information is not included with this product information about your specific computer hardware or operating system information about another manufacturer s Bluetooth hardware or software or information about your application software Your best source for this information is the set of manuals and discs that came with your hardware operating system or application e Many applications have built in support for Intuos4 features such as pressure sensitivity tilt and the pen eraser You can find a listing of applications that support these features on Wacom s web site see product information e For information on how best to use Intuos4 features within a specific application see the instructions in that application s manuals Wacom s philosophy is to continually improve all of its products As a result engineering changes and improvements are made from time to time Therefore some changes modifications and improvements may not be covered in this manual Contents Index int UOS Contents
48. ch to the on position The tablet and your computer will remember each other and the Bluetooth connection will automatically be reestablished e Ifthe link is broken for more than 5 seconds e g you shut down your computer unplug your USB to Bluetooth adapter dongle or otherwise switch off your Bluetooth support or move the tablet too far away from the computer the tablet will switch to sleep mode To reestablish the connection press the Touch Ring toggle button or turn the tablet power switch off and then on You can break the pairing between tablet and computer from either the tablet or from the computer to which it is linked When the pairing is broken the tablet will once again become discoverable by any Bluetooth enabled computer To disconnect the wireless tablet from a computer e From the tablet simply press the pairing button located on the side of the tablet A disconnect message will be sent to the computer e From the computer open the Bluetooth devices control panel and delete the pairing for the tablet Important The use of wireless devices is regulated in most countries If you will be traveling with your wireless tablet be sure to check with the appropriate regulatory authority for any restrictions that may apply to your product in the country of your destination Products using wireless signals can interfere with the equipment on commercial aircraft and regulations require that all wireless devices be turned off whe
49. control how the screen cursor moves Select PEN MODE to set the cursor so that its movement corresponds with the position of your Intuos4 tool on the tablet Wherever you place your tool on the tablet the cursor will appear at a corresponding point on the screen This is known as absolute positing and is the default setting for the pen Select the ORIENTATION of your tablet This setting is tablet specific and applies to all tools Mapping and applications Other MAPPING tab settings can be customized for a specific tool and application Orientation ExpressKeys Left Mode Pen Mouse Select a monitor SCREEN AREA for tablet to screen mapping B Force Proportions When FORCE PROPORTIONS is S checked forces a proportional Tablet Area Full Y tablet to screen mapping T B relationship Select a TABLET AREA for tablet to Default screen mapping Screen Area Full b The tablet to screen image dynamically updates to illustrate the selected mapping relationship D Content Ind _ fi le D 46 int Uos Contents professional pen tablet When Mouse MODE is selected you can decide how you would like the mouse to track MOUSE TRACKING options apply only to the Intuos4 Mouse e When USE TABLET ORIENTATION is selected moving the mouse toward the top of the tablet moves the screen cursor up In this mode the entire active area of the tablet is available for mouse tracking e Whe
50. creen The screen cursor indicates pen position and follows the movement of the pen across the tablet surface This is the default setting for the pen Learn about using the Grip Pen The active area is a mapped representation of your computer screen s By default it uses the entire screen or all screens if you have multiple displays You can customize the mapping relationship by setting the tablet to screen Mapping Tablet active area The area of the tablet that senses pen movement Your Intuos4 input tools work only on the active area of the tablet Contents Index int Uos Contents professional pen tablet WORKING WITH MULTIPLE MONITORS If your computer is equipped with more than one monitor Intuos4 will map to the monitors based upon how they are configured in the display properties control panel e f more than one monitor is in use and you are in extended monitor mode the tablet maps to all monitors as if they were one large display The below image illustrates a tablet mapping to the entire system desktop which is displayed on two monitors Monitor 1 Monitor 2 B B e f your monitors are in mirror mode both monitors display the same content the tablet maps to the entire space on each monitor and the screen cursor is displayed on each monitor simultaneously See your hardware and operating system documentation for details on configuring your computer and operating system f
51. d and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation You can determine whether the equipment is causing interference by disconnecting it from your computer If the interference stops it was probably caused by the equipment If the equipment does cause interference to radio or television reception you may be able to correct the interference by using one or more of the following measures e Rotate the television or radio antenna until the interference stops e Move the equipment farther away from the television or radio e Plug the equipment and computer into an outlet that is on a different circuit from the television or radio If necessary consult your Wacom dealer or an experienced radio television technician for help Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate your authority to operate the product FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance This equipment must not be co located or operating in conjunction with any other antenna or transmitter See also Industry Canada Canada only and CE declaration Content Ind en a int Uos Cont
52. e Communication interfaces Connector USB cable length Power requirements Battery Connectivity Operating temperature Battery charging temperature Storage temperature Operating relative humidity Storage relative humidity Certification and compliance Contents Electro magnetic resonance 128 x 64 dot x2 white 203 2 x 127 mm 8 0 x 5 0 in 363 x 253 x 15 mm 14 3 x 10 0 x 0 6 in approximately 900 g 2 Ib approximately with battery 16 10 200 Ipmm 5080 Ipi 0 25 mm 0 010 in 0 5 mm 0 020 in 60 degrees 10 mm 0 39 in 200 points per second supported only on Bluetooth Specification v2 0 or later connections that support the EDR Enhanced Data Rate protocol 0 25 mm 0 01 in approximately Bluetooth wireless technology Bluetooth 2 1 EDR USB USB Type A to USB mini B 2 5 m 8 2 ft DC 5V less than 500 mA from primary USB port or powered USB hub Li lon battery pack 3 7V 1800 mAh Bluetooth wireless technology using HID protocol 5 to 40 degrees C 41 to 104 degrees F 5 to 35 degrees C 41 to 140 degrees F 20 to 60 degrees C 4 to 140 degrees F 30 to 80 non condensing 30 to 85 non condensing FCC15B Class B FCC 15C CE VCCI Class B ICES 003 RSS 210 NCC BSMI C Tick SRRC KCC FAC GOST R Japan Radio Law RoHS Chinese RoHS Korean RoHS Index a e pD INtTUOS _ a l q D 94 INTUOS4 GRIP PEN MODEL KP 501E 01 Pen tip travel 1 0 mm 0 04 in
53. eb site at http www wacom com productsupport Connection problems General problems Windows specific problems Mac specific problems CONNECTION PROBLEMS The computer does not have You will need to install a USB to Bluetooth adapter dongle in order to built in Bluetooth support add wireless connectivity to your computer The adapter should support Bluetooth with Human Interface Device HID profile After moving the power switch If the tablet was previously working on your computer but works no to the on position the wireless longer check the configuration of your Bluetooth connection connection light glows steadily for 2 to 5 seconds and then turns off e lf you are using a computer with a built in Bluetooth module ensure that it is enabled and working If you are using a USB to Bluetooth adapter dongle make sure it is plugged in and working e Test your computer s Bluetooth support with another Bluetooth enabled device such as a mouse or keyboard e Open the Bluetooth control panel and make sure the tablet was not disconnected e Move the tablet closer to the antenna and make sure there are no metal or other high density obstructions in the line of sight between the tablet and Bluetooth antenna Repeat the process of establishing a Bluetooth connection with your computer After moving the power switch The tablet has not been paired to a computer or the connection has to the on position the wireless been broken eit
54. ecification v2 0 enter 0000 Otherwise select don t use or no e When successfully paired to your computer Intuos4 will appear as a connected device in the Bluetooth devices control panel showing in the device list as PTK 540WL and the tablet wireless connection light will glow blue e lf the tablet is not listed in the control panel refresh the assistant and again press the tablet pairing button 4 Close the Bluetooth devices control panel Check the connection by using the pen on the tablet to move the screen cursor Contents Index leap Int Uos Contents professional pen tablet If you have not already done so install the Wacom tablet driver software Insert the Intuos installation CD into your computer s CD ROM drive click on the INSTALL TABLET link and follow the prompts to install the driver software Important Remember that the Intuos4 Wireless tablet driver software must be installed before you can work with full tablet functionality and features such as pressure sensitivity with the pen After you have paired your wireless tablet and computer they will remember the connection as if you had connected a virtual cable between them The tablet will remember which computer it is connected to and will reject all attempts by other computers to connect to it e When starting up your computer wait until your operating system has completely loaded and then move the tablet power swit
55. ed service location accompanied by the return authorization number your name address and telephone number proof of purchase date and a description of the defect Wacom will pay for return shipping by United Parcel Service or by an equivalent service as chosen by Wacom Wacom s sole obligation and entire liability under this warranty shall be at Wacom s option either the repair or replacement of the defective product or parts thereof of which Wacom is notified during the Warranty Period provided however that you are responsible for i the cost of transportation of the product to the designated service location and ii any loss or damage to the product resulting from such transportation D Contents Index int Uos Contents professional pen tablet Wacom shall have no responsibility to repair or replace the product if the failure of the product has resulted from accident abuse misuse negligence or unauthorized modification or repair or if it has been handled or stored other than in accordance with Wacom s storage instructions Any descriptions drawings specifications samples models bulletins or similar material used in connection with the sale of the product shall not be construed as an express warranty that the product will conform or comply with your requirements EXCEPT FOR THE LIMITED WARRANTY DESCRIBED ABOVE THERE ARE NO OTHER WARRANTIES MADE BY WACOM ON THIS PRODUCT NO ORAL OR WRITTEN INFORMATION OR
56. eem to lag or skip in some applications When using Intuos4 on a multiple monitor system you cannot use the pen tip to control the other monitor s Contents Do not place an Intuos4 tool on the tablet when it is not in use or when you are using another pointing device Leaving your tool on the tablet may interfere with screen cursor positioning when using other input devices Open the Wacom Tablet control panel and go to the MAPPING tab Verify that PEN MODE is selected and that the SCREEN AREA is set to FULL for the selected tool and application If this does not help click on the DEFAULT button to reestablish tablet to screen mapping If you are still having difficulty remove the tablet preferences Confirm whether the pen does or does not function See testing your tools When you are not using your Intuos4 input tool s remove them from the tablet surface or the tablet will continue to send data keeping the computer awake On rare occasions the tablet may receive interfering radio frequencies from a computer monitor or nearby AM radio station If you notice interference from a monitor try moving the tablet at least 6 inches away from the monitor or change the monitor refresh rate or monitor resolution If the screen cursor lags or jumps try optimizing the Bluetooth connection See optimizing the Bluetooth connection for tips on improving the Bluetooth connection Determine if an ExpressKey has been set to
57. el and go to the ERASER tab Move the ERASER FEEL slider toward FIRM or select DETAILS and increase the CLICK THRESHOLD setting If this does not help see testing your tools D Index INTUOS professional pen tablet Contents You notice a screen delay at the beginning of pen or inking strokes You have to press hard with the pen when clicking drawing or writing The pen tip does not function Changing the function settings of an input tool has no effect The pen side switch does not work Contents Open the Wacom Tablet control panel and go to the PEN tab Try decreasing the TIP DOUBLE CLICK DISTANCE see adjusting tip feel and double click If that does not work try dragging the TIP DOUBLE CLICK DISTANCE slider to the OFF position in order to turn off double click assist Try turning off the operating system inking features Open the Wacom Tablet control panel and go to the PEN tab Move the TIP FEEL slider toward SOFT or select DETAILS and decrease the SENSITIVITY and CLICK THRESHOLD settings Be sure you are using the pen that originally came with Intuos4 Other pens may not function properly on the tablet Check the control panel s PEN tab and verify that a CLICK function is assigned to the tip Try the pen eraser to see if that portion of the pen is functional A tablet status LED should brighten when the tip or eraser is pressed If not you may have defective hardware See
58. en text you make with digital ink can be converted on the fly or at another time Discoverable mode An operational state in which a Bluetooth enabled device is available for discovery by another Bluetooth enabled device Display Toggle An Intuos4 feature that allows you to work with your tablet on all displays or on one display at a time Available only on multiple monitor systems See working with Display Toggle for more information Double click assist A function of the Wacom Tablet control panel that makes it easier to double click by setting the size of the double click distance Double click distance The maximum distance in screen pixels that the cursor can move between clicks and still be accepted as a double click Increasing the double click distance makes double clicking easier but may cause a delay in brush strokes in some graphics applications Double click speed The maximum time that can pass between clicks and still be accepted as a double click Eraser aware application A software application that has built in support for the Intuos4 eraser These applications take advantage of the eraser in different ways depending on what makes sense for the application ExpressKeys The customizable control keys located on your professional pen tablet ExpressKeys Left A tablet ORIENTATION setting where the Touch Ring and ExpressKeys are oriented to the left of the tablet ExpressKeys Right A tablet ORIENTATION setting where t
59. ent Ind ne w a int Uos Contents professional pen tablet FUNCTION NAME DESCRIPTION DISPLAY TOGGLE For multiple monitor systems Enables you to toggle the current tablet mapping and screen cursor between different displays when you press an ExpressKey that has been assigned this function See working with Display Toggle MODE TOGGLE Toggles between PEN MODE and Mouse MODE When first setting a tool button to MODE TOGGLE the MOUSE MODE dialog box is displayed where you can adjust the mouse acceleration and speed Sets the screen cursor tracking speed when in MOUSE MODE Sets the screen cursor acceleration when in MOUSE MODE Mouse Acceleration Mouse Speed Off High Slow Fast Note You can only set one Mouse Speed and one Mouse Acceleration for each device C Defaut Cane COK MousE MODE settings can be accessed from a number of different locations within the control panel However for each input tool and application that you are customizing only one MOUSE ACCELERATION and SPEED setting can be made The Mouse MODE acceleration and speed settings are independent of system settings Changes you make to these settings in the Wacom Tablet control panel do not affect similar system settings However changes made to similar system settings may affect your Intuos4 tablet settings ERASE Default setting for the eraser See erasing for information on using the eraser SHOW SE
60. ents professional pen tablet INDUSTRY CANADA CANADA ONLY Industry Canada Class B This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada CE DECLARATION The Intuos 4 Wireless digitizing tablet model PTK 540WL has been tested and found to comply with the following harmonized European Norms e EN 55022 2006 A1 2007 e EN61000 3 2 2006 e EN61000 3 3 1995 A1 2001 A2 2005 e EN55024 1998 A1 2001 A2 2003 EN 61000 4 2 1995 A1 1998 A2 2001 EN61000 4 3 2006 EN61000 4 4 2004 EN61000 4 5 2006 EN61000 4 6 2007 EN61000 4 8 1993 A1 2001 EN61000 4 11 2004 e EN 60950 1 2006 e EN 300 328 V1 7 1 e EN 301 489 1 V1 8 1 17 V2 1 1 Based on the results of these tests Wacom declares that the above mentioned devices conform to Article 10 1 of the European Council EMC Directive 2004 108 EC LVD Directive 2006 95 EC and to the R amp TTE Directive 1999 5 EC and indicates this conformity by the CE sign on each device The device must be installed and operated always in strict accordance with the instructions given in this handbook Any changes or modifications to this product that were not specifically authorized by Wacom will invalidate this declaration Contents Index int Uos Contents professional pen tablet PRECAUTIONS Warnings Safety precautions for Lithium lon batteries Cautions WARNINGS D
61. ents a EE S ee PEN AND DIGITAL INK CAPABILITIES IN WINDOWS Microsoft Windows 7 and Vista provide extensive support for pen and touch input When using the professional pen tablet with a computer running Windows 7 or Vista your experience is enhanced by powerful note taking handwriting recognition fast navigation and other digital inking options designed to give you quick intuitive results with the Intuos4 pen e Note taking Use your Intuos4 pen to jot notes and capture quick sketches in Microsoft Journal Journal simulates a physical notebook but with the advantages of digital note taking you can choose from a variety of pen marker and highlighter tools plus an eraser that is easily activated by the eraser of your Intuos4 pen Journal also includes a powerful search engine that can even locate your handwritten content e Handwriting recognition Because Windows 7 and Vista include powerful handwriting recognition capabilities you can use your Intuos4 pen to quickly enter handwritten information anywhere the computer accepts typed input You can convert your handwritten content to typed text at any time e Gestures Use your Intuos4 pen to make simple gestural movements on the tablet to trigger customizable actions for navigation editing and other functions To customize your gestures select the FLICKS tab in the PEN AND INPUT DEVICES control panel e Digital Ink in Microsoft Office 2007 Use your Intuos4 pen to full advantage
62. er No 6 Jia Jianguomenwai Avenue Beijing 100022 China Internet http www wacom com cn WACOM AUSTRALIA PTY LTD Unit 8 Stage 1 Cumberland Green 2 8 South Street Rydalmere NSW 2116 Australia Telephone 61 2 9422 6700 Fax 61 2 9420 2272 WACOM TAIWAN INFORMATION CO LTD Suite 605 6th floor No 205 Tun Hwa North Road Taipei 105 Taiwan Telephone 886 2 2712 2675 Fax 886 2 2712 9789 Contents Index WdICOM WACOM EUROPE GMBH Europark Fichtenhain A9 47807 Krefeld Germany Telephone 49 0 2151 3614 0 Fax 49 0 2151 3614 111 WACOM CO LTD ASIA PACIFIC MARKETING AND SALES DIVISION Harmony Tower 18F 1 32 2 Hon Cho Nakano Ku Tokyo 164 0012 Japan Telephone 81 3 5309 1513 Fax 81 3 5309 1514 WACOM KOREA CO LTD 25th Floor DMC iaan Sangam 2nd Complex 1653 Sangam dong Mapo gu Seoul Korea 121 270 Korea Telephone 82 2 557 3894 Fax 82 2 557 3895 WACOM SINGAPORE PTE LTD 3 Bishan Place CPF Bishan Building 06 08 Singapore 579838 Telephone 65 6258 8640 Fax 65 6258 8697 116
63. et preferences may be corrupted or want to make certain that all settings are at their factory defaults After changing right and left handed settings in the computer s mouse control panel the pen tip no longer functions properly and the Intuos4 Mouse tool button functions are reversed Contents Use the Wacom Tablet Preference File Utility to work with your preferences Close any open applications Click the START icon and select ALL PROGRAMS Then select WACOM TABLET and WACOM TABLET PREFERENCE FILE UTILITY e tis a good idea to first back up your tablet preferences In the TABLET PREFERENCE FILE UTILITY dialog box click BACKUP and follow the prompts e Then delete the tablet preferences as follows Single user In the TABLET PREFERENCE FILE UTILITY dialog box click the REMOVE button under MY PREFERENCES to delete the preferences for the current user Multiple users Click the REMOVE button under ALL USER PREFERENCES to delete preferences for multiple users Note that administrator rights are required to delete preferences for all users Relaunch any currently open tablet aware applications that you may be running You can quickly restore tablet preferences that have been backed up by clicking RESTORE under MY PREFERENCES Restart Windows for your Wacom tool settings to be correctly recognized Index int Uos Contents professional pen tablet MAC SPECIFIC PROBLEMS At startup a dialog box T
64. f the Touch Ring status LEDs and ExpressKeys display select the OPTIONS button located at the bottom of the control panel In the OPTIONS dialog box adjust the EXPRESSKEY DISPLAY BRIGHTNESS slider as needed Use the pull down menus to choose a function that will be performed when the key is pressed Your choice is displayed either within the pull ExpressKeys down menu or beneath the menu Modifier ST The default settings are described in using the ExpressKeys Modifier ExpressKey functions can be defined Ctrl for use with specific applications Modifier Alt Pan Scroll The ExpressKeys will be rotated 180 degrees when the tablet orientation is set to EXPRESSKEYS RIGHT ExpressKeys Modifier Shift Modifier Ctrl Alt Pan Scroll ExpressKeys tab shown for right handed use Show Settings T Radial Menu v Precision Mode v Display Toggle hd For multiple displays Default ExpressKeys tab shown for left handed use Show Settings Radial Menu Precision Mode Display Toggle hd For multiple displays Default Important Some applications can override and control the ExpressKey functions For details see using applications integrated for tablet control Contents Index int Uos Contents professional pen tablet CUSTOMIZING THE TOUCH RING When you select the tablet TOUCH
65. figuration see the documentation that came with your operating system or Bluetooth support 1 Turn on your computer and wait until the system has fully loaded 2 Be sure the tablet power switch is in the on position and that the USB cable is not attached to an active USB port Place the tablet in discoverable mode by pressing the pairing button located on the side of the tablet The tablet wireless connection light will flash blue e The tablet will remain in discoverable mode for 3 minutes or until a pairing with your computer has been established If pairing is not established within 3 minutes the tablet will turn itself off e The tablet can only be paired linked to your computer while the tablet is in discoverable mode e The tablet can only be paired to a single computer at a time Pairing button 3 With the tablet in discoverable mode open the Bluetooth devices control panel or select the Bluetooth icon from the menu bar or system tray Turn on your Bluetooth support if necessary and choose to add anew device Common options are ADD WIRELESS DEVICE or SET UP BLUETOOTH DEVICE In the control panel on a Mac click the icon to set up a new device Carefully follow all directions in the setup assistant e f prompted for the device type to set up choose tablet if available otherwise choose mouse e f prompted for an authentication code or passkey and your Bluetooth support complies with Bluetooth Sp
66. for 2 5 minutes USING APPLICATIONS INTEGRATED FOR TABLET CONTROL Some software applications may be designed to directly control the pen tablet ExpressKeys or Touch Ring function s When working in an application that has been integrated in this manner the ExpressKeys or Touch Ring may perform a different function than what is currently set in the Wacom Tablet control panel e When an ExpressKey is overridden by an application the ExpressKeys display will automatically update to show either the new function name or Application Defined Some or all of the ExpressKeys may be overridden depending on the application e When an application overrides the Touch Ring all Touch Ring functions are affected If an application overrides only one two or three of the available Touch Ring functions the remaining function s are set to SKIP e An integrated application will control the ExpressKeys or Touch Ring only when that application is active and in the foreground When you close that application or select a new application pane to work in your Wacom Tablet control panel settings are returned to their previous state e To review the ExpressKeys or Touch Ring function settings for the current front most application set an ExpressKey to SHOW SETTINGS and press the key at any time Applications that have been integrated in this manner will typically provide you with the opportunity to opt out or disable this functionality when first using y
67. friction feel qty 5 Felt nib chisel tip qty 5 ACK 20005 Nib set for Art Pen ACK 20006 a Pen grip standard for pen use without side switch ACK 30003 ae Pen grip thick bodied grip for pen use without side switch ACK 30002 Intuos4 Grip Pen accessory kit ACK 40001 Tablet battery Li lon ACK 40203 Personalization rings for Grip Pen FUZ A15 7 Tablet surface sheet replacements Medium standard ACK 10221 Medium clear ACK 10222 For order information see ordering parts and accessories Content Ind ee a INEUOS om EEF RADIO AND TELEVISION INTERFERENCE The equipment described in this manual generates uses and can radiate radio frequency energy If it is not installed and used properly that is in strict accordance with Wacom instructions it may cause interference with radio and television reception FCC NOTICE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installe
68. function See also warnings and safety precautions for Lithium lon batteries Contents Index int Uos Contents professional pen tablet LICENSE AND WARRANTIES WORLDWIDE EXCEPT FOR EUROPE AFRICA AND MIDDLE EAST SOFTWARE LICENSE This legal document is an agreement between you the end user and Wacom Technology Corporation Wacom 1 Grant of License The enclosed product includes computer programs embedded in firmware and accompanying diskette or CD ROM the Software The Software is licensed not sold to you for use only with Wacom products upon the terms of this license and Wacom reserves any rights not expressly granted to you Wacom grants to you a non exclusive right to use this copy of the Software in conjunction with a Wacom product at a single location 2 Ownership of Software Although you may own the product in which the Software is originally recorded Wacom retains ownership of the Software itself You acknowledge that the Software is Wacom s property and contains valuable confidential unpublished information developed or acquired by Wacom at great expense including data processing algorithms innovations and concepts The Software is protected by copyright and other federal and state laws You agree to use your reasonable best efforts to protect the Software from unauthorized reproduction distribution disclosure use or publication 3 Copy Restrictions Unauthorized copying of the Software is exp
69. ght glows yellow when charging and glows green when fully charged See battery status and wireless connection lights int Uos Contents professional pen tablet To check the current battery charge status open the Wacom Tablet control panel and look at the tablet icon in the TABLET list of the control panel See working with tablet properties e To maximize battery operation time consider turning off the ExpressKeys display see advanced options e When you are done working turn off the tablet using the tablet power switch in order to conserve battery power e The tablet will draw current from the battery whenever the power switch is in the on position A small Current is drawn even in auto sleep and tablet auto shut down modes and will slowly discharge the battery It is a good idea to charge the battery and move the tablet power switch to the off position before leaving the tablet unused for a number of days e lf the battery charge is low and the battery remains in the tablet for a long period of time a week or longer with the power switch in the on position the small trickle of current used by the tablet is likely to discharge the battery so far that an internal protection circuit within the battery is activated If this occurs you will no longer be able to charge the battery To preserve your battery move the tablet power switch to the off position before leaving the tablet unused for a week or longer e For e
70. gnition 4 Test the Ink function using your Wacom tablet and pen 5 If this procedure does not resolve your problem with Ink contact Apple Support for further assistance Wacom is not the software manufacturer for Ink and we are limited in our abilities to support a third party software application Contents Index int Uos Contents professional pen tablet TECHNICAL SUPPORT OPTIONS If you have a problem with your Wacom tablet first check the tablet installation guide to be sure the unit is installed correctly Then review the troubleshooting procedures If you cannot find the answer in this manual you may find updated information about your problem in the appropriate Read Me file for your platform located on the Intuos installation CD You can also check the product FAQs Frequently Asked Questions on the Wacom web site for your region If you have an Internet connection you can download the latest software drivers from the Wacom web site for your region See obtaining driver downloads If you cannot solve the problem and you think your Wacom tablet is not working properly contact the Wacom support staff for the area where your product was purchased See the Wacom tablet Read Me file located on the Intuos installation CD for contact information When you call you should be at your computer with the following information available e his manual e Tablet serial and model number Look on the bottom of the tablet
71. gs Tool Tips are available for most control panel items Position the screen cursor over an item and let it rest there in a few moments the Tool Tip will pop up Your keyboard tab and arrow keys can be used to navigate the control panel Content Ind ne w a INEUOS oenen TEEF Control panel lists and tabs The control panel TABLET TOOL and APPLICATION lists allow you to select the tablet tool or application for which to change settings To change tool settings open the control panel using the tool you wish to customize The tool will be automatically selected in the TOOL list and the appropriate tabs will be displayed If the tool is not automatically selected choose it from TOOL list To customize settings for a different tool click on its icon within the TOOL list the appropriate tabs will be displayed See customizing the pen customizing the optional mouse and customizing the tablet functions for more information The TABLET list displays an icon for any supported tablet that has been installed on 5 oe your system and is currently connected acon able ae All settings shown below this list apply to Tablet r Intuos4 WL the selected tablet e The control panel will not launch SS OO unless a supported tablet is connected Too m 4 m to the computer elW idhs afn Pen E es e Settings can only be viewed or Ps ale changed for an attached tablet Application A A
72. h You can also set an ExpressKey to double click Content Ind ee a INTUOS contents n a oe oe ADJUSTING ERASER FEEL Select the ERASER tab Select the function to perform when using the eraser Eraser Customizes the amount of pressure Eraser Feel iii i needed to erase J st Soft Firm Displays the eraser FEEL DETAILS Details dialog box where you can further customize the eraser sensitivity Current Pressure Full With your screen cursor positioned over an empty area of your desktop press the pen s eraser on the tablet to test the ERASER FEEL setting Adjust the ERASER FEEL so that you can comfortably reach full pressure Default ADVANCED TIP AND ERASER PRESSURE SETTINGS To further customize tip or eraser pressure settings from the PEN or ERASER tab click on the DETAILS button The options within the FEEL DETAILS dialog box enable you to change the tip or eraser pressure sensitivity and click threshold settings independently Important In the PEN and ERASER tabs these settings are adjusted simultaneously with the TIP FEEL or ERASER FEEL slider which override the detailed pressure settings Drag the slider to select a Graphically displays the pressure sensitivity setting Profile selected pressure SENSITIVITY If you have a soft touch choose Sensitivity 3 curve and CLICK THRESHOLD a softer setting settings A curve that increases quickly makes the pen feel more sensi
73. he Touch Ring and ExpressKeys are oriented to the right of the tablet Contents Index A a Di int Uos Contents professional pen tablet Fingerwheel The control wheel on the Intuos4 Mouse and optional Airbrush Journal A Microsoft Windows application that electronically simulates a physical journal pad but with the advantages of digital note taking For example you can create quick sketches and jot handwritten notes that can be converted to text and sent on to colleagues for digital mark up Journal includes a variety of pen marker and highlighter tools plus an eraser that is easily activated by the eraser of your Intuos4 pen Additionally your handwritten content is searchable within Journal Mapping The relationship between your Intuos4 tool position on the tablet and the cursor position on the monitor screen Modifier Modifier keys include SHIFT ALT and CTRL for Windows or SHIFT CONTROL COMMAND and OPTION for Macintosh You can customize your Intuos4 tool to simulate a modifier key Mouse acceleration A setting that allows you to adjust the screen cursor acceleration when your Intuos4 tool is in MOUSE MODE Mouse mode A method for positioning the screen cursor When you place an Intuos4 tool on the tablet you can move the screen cursor with a pick up and slide motion similar to using a traditional mouse This is known as relative positioning and is the default setting for the Intuos4 Mouse See als
74. he battery and move the tablet power switch to the off position before leaving the tablet unused for a number of days e lf the battery charge is low and the battery remains in the tablet for a long period of time a week or longer with the power switch in the on position the small trickle of current used by the tablet is likely to discharge the battery so far that an internal protection circuit within the battery is activated If this occurs you will no longer be able to charge the battery To preserve your battery be sure to move the tablet power switch to the off position before leaving the tablet unused for a week or longer e For extended storage a month or longer Wacom recommends that the battery be at least half full before you move the power switch to the off position You do not need to remove the battery because the power switch disconnects the battery from the tablet circuit when in the off position e An internal protection circuit within the battery prevents any charging once the voltage has fallen below a minimum safety level Once a Li lon battery has been over discharged it cannot be recharged A Warning See the safety precautions for Lithium lon batteries Content Ind ne w Aa int Uos Contents professional pen tablet REPLACING THE TABLET BATTERY If your tablet battery has exceeded its life span and can no longer be charged or no longer holds a charge it will need to be replaced Be sure to use only the recha
75. he tablet was not detected at startup appears telling you that either the driver failed to load or the tablet preferences have not yet been created If you are using a wireless connection make sure the Bluetooth wireless connection to your tablet is active Check also that the tablet wireless connection light and a tablet status LED are illuminated From the GO menu select the UTILITIES folder and launch the SYSTEM PROFILER Select BLUETOOTH from the HARDWARE section of the CONTENTS list A Wacom Bluetooth tablet model should be listed Ifa tablet model is not listed check the Bluetooth wireless connection If you have connected the tablet with the provided USB data cable make sure the USB interface cable is securely connected to the tablet and to an active USB port on your computer Check also that a tablet status LED is illuminated If your tablet is plugged into a powered USB hub make sure the hub is connected and active From the Go menu select the UTILITIES folder and launch the SYSTEM PROFILER Select USB from the HARDWARE section of the CONTENTS list A Wacom USB tablet model should be listed If a tablet model is not listed check the USB cable connection or try plugging the tablet into a different USB port If you are still having difficulties uninstall then reinstall the tablet driver software If this does not help contact Wacom for Technical Support See technical support options Cannot switch off Intuos4 after Swi
76. he validity of the other provisions shall not be affected in full or in part Should a provision be invalid the legally permissible regulation most closely resembling the invalid regulation shall apply in its place LIMITED WARRANTY WACOM guarantees to you as the initial purchaser that the product hardware when used as intended will remain free from material defects and processing errors for a warranty period of TWO 2 YEARS and Cintiq products shall be guaranteed for a warranty period of THREE 3 YEARS commencing from the purchase date and provided that the product was unused at the time of purchase Defects in wear parts e g pen tips resulting from normal wear and tear are exempt from the warranty Furthermore WACOM guarantees that the data carriers delivered with the product are free from material defects and processing errors for a period of SIX 6 MONTHS from the date of purchase If the product excluding any software is discovered to be faulty it must be returned immediately to the place of purchase in its original packaging within the warranty period together with your name address and telephone number a description of the problem and a copy of the original receipt The customer shall be liable for any possible damage or loss of the product during transit for this purpose Under the provisions of this warranty WACOM only undertakes to repair or replace the faulty product or parts at its own discretion in cases where defects are pro
77. her by pressing the tablet s pairing button or by deleting connection light flashes blue the pairing from the Bluetooth control panel Pair the tablet to your computer as described in establishing a Bluetooth connection D Contents Index INTUOS professional pen tablet Contents The battery status light does not come on after moving the power switch to the on position When pairing the tablet the tablet does not appear in the list of available devices to pair A pairing unsuccessful message is displayed when attempting to link the tablet to the computer Pairing was successful but the wireless tablet does not seem to work correctly The tablet works fine when the USB cable is connected to a primary USB port located directly on your computer or to a powered USB hub but switches off as soon as the cable is disconnected Contents Try again If the light does not come on after repeated attempts your battery charge may be too low Connect the USB cable directly to a powered USB port on your computer or powered USB hub If the battery status light does not glow when the power switch is in the on position the battery may be defective e he tablet should appear in the pairing list with a mouse icon named Wacom TABLET e Ifthe wireless connection light is not flashing press the pairing button on the side of the tablet to make the tablet discoverable The tablet will be in discoverable mode for
78. holder into the tablet opening Once attached you can place the pen in the holder loop for safe keeping The pen holder can be removed by unsnapping it from the tablet To protect your tablet always replace the pen holder cover when the pen holder is not attached Contents Index int Uos Contents professional pen tablet POSITIONING The pen is used to position the cursor or pointer on your screen Lift the pen and place the pen tip on the tablet active area The cursor will appear at the new location Move the screen cursor by hovering the pen over the tablet surface Do this without touching the tablet surface but while still keeping the pen tip within proximity of the tablet To select an icon or folder use your pen to position the screen cursor over the object Press down to select Tips If you find that using a pen is somewhat difficult try the eye hand coordination exercise Pointing is easier when you orient the tablet square to the computer monitor so the screen cursor follows the same direction as your hand movements on the tablet You can set the pen to position the screen cursor two different ways See tablet to screen mapping e In PEN MODE wherever you place the pen on the tablet the screen cursor will appear at a corresponding point on the display screen The screen cursor indicates pen position and follows the movement of the pen across the tablet surface This is the default
79. htness 2 5 minutes no user input No illumination ExpressKeys display Low brightness Touch Ring status LEDs Active user input Returns brightness to set level The PRESSURE COMPATIBILITY check box should be checked if you are using graphics applications that only support a maximum of 1024 levels of pressure such as Adobe CS3 Corel Painter 9 and other older applications If not checked the pen will feel overly sensitive when using these older applications By default the SHOW WIRELESS TABLET BATTERY STATUS check box is set to display the Wacom icon in your system task bar Windows or menu bar Macintosh Uncheck this box to remove the icon Contents Index a le lt D 87 int Uos Contents professional pen tablet OPTIMIZING THE EXPRESSKEYS DISPLAY The pen tablet ExpressKeys display uses Organic Light Emitting Diodes OLEDs Although the display has been designed to provide reliable performance for many years you may eventually notice a decrease in luminosity for pixels that are lit over extended periods of time To minimize the appearance of different pixel brightnesses due to this effect adjust the EXPRESSKEY DISPLAY BRIGHTNESS option to the lowest comfortable light level See advanced options for details Note The power saving feature of the pen tablet will automatically dim the ExpressKeys display if there has been no user input for 1 minute and it will turn off the ExpressKeys display if the pen tablet has been idle
80. ined keystrokes pair and click OK To learn which keystroke shortcuts are supported by a particular application see D the documentation that came with the application Content Ind ne m Ead int Uos Contents professional pen tablet FUNCTION NAME DESCRIPTION MODIFIER Enables you to simulate modifier key s Such as SHIFT ALT or CTRL for Windows or SHIFT OPTION COMMAND and CONTROL for Macintosh Many applications use modifier keys to constrain the size or placement of objects Define Modifi Shift Alt Choose one or more modifier key options Select the CLICK box if you want a mouse Ctri click to occur whenever you press the tool Click button RADIAL MENU Displays a Radial Menu on your screen Each level of the hierarchical menu consists of eight menu slices which may contain various features and options to choose from BACK Simulates the BACK command in browser applications FORWARD Simulates the FORWARD command in browser applications PAN SCROLL Enables you to position a document or image in any direction within the active pane by pressing a tablet or pen button set for PAN SCROLL and then dragging with the pen tip across the tablet s active area When you select PAN SCROLL the PEN SCROLL SPEED dialog box prompts you to set a scrolling speed for use in Pen Scroll Speed applications that do not support grabber hand pixel level panning within a a document or image Slow Fast A
81. ing IN NORTH AND SOUTH AMERICA CONTACT IN JAPAN CONTACT Wacom Technology Corporation Wacom Co Ltd 1311 SE Cardinal Court 2 510 1 Toyonodai Vancouver Washington 98683 Otone Machi Kitasaitama Gun U S A Saitama 349 1148 Japan IN MAINLAND CHINA AATAS T ONAE EXCEPT HONG KONG CONTACT Wacom Co Ltd Wacom China Corporation Harmony Tower 18F 1 32 2 Hon Cho Unit 2807 28th Floor SK Tower Nakano Ku Tokyo 164 0012 No 6 Jia Jianguomenwai Avenue Japan Beijing 100022 China E mail support wacom com cn Contents Index int Uos Contents professional pen tablet LICENCE WARRANTY CONDITIONS EUROPE AFRICA AND MIDDLE EAST SOFTWARE LICENCE AGREEMENT Important customer information The scope of delivery of this product covers copyright protected computer programs software which are the inalienable intellectual property of WACOM Europe GmbH WACOM This software is an integral component of the product and is also held on the associated data carrier The software of WACOM and the associated rights of use are not included with the purchase of this product from your retailer WACOM grants you the user the right to use the software exclusively in accordance with the conditions stipulated in this licence agreement By purchasing this product you agree to the following licence conditions Conditions for using the software WACOM issues the user with a personal non exclusive licence to use the software solely
82. ip area Nib extractor Replacement nibs e 5 standard nibs black eT e 1 flex nib white side switch Intuos4 Grio Pen sani INtUOS4 Ip Fen e 1 stroke nib white To personalize your pen e 3hard felt nibs unscrew the tip cone and O Replaceable nib replace the colored ring with QF gray pen tip one of another color included Also available is a See available parts and accessories for information on additional input tools and accessories travel sleeve that can be used to protect your tablet when traveling or for storing the unit BATTERY AND POWER MANAGEMENT This section contains important information about the battery and power management features of your Intuos4 pen tablet Be sure to review the following items Battery activation Charging the battery Power saving features Battery status and wireless connection lights See also working with the tablet for more information about tablet features Contents Index int Uos Contents professional pen tablet BATTERY ACTIVATION Your wireless pen tablet uses a rechargeable Lithium lon Li lon battery Before you can charge or work with Intuos4 you must first remove the insulating safety tag from between the battery and tablet contacts 1 Turn the wireless tablet upside down and open the battery cover Use your fingernail to press inward on the latch bar and flip the cover outward to open 2 Making sure the battery stays in place gently pull on the safety
83. ironment during the disposal process Within the European Union users are required not to dispose of Waste Electrical and Electronic Equipment WEEE as unsorted municipal waste according to the Directive 2002 96 EC of the European Parliament and of the Council of 27 January 2003 or the corresponding local laws of the Member States Products for which this is applicable will be marked with the WEEE symbol shown at the beginning of this note unless this is not feasible because of the size or the function of the product Wacom products are subject to the Directive 2002 96 EC and therefore you should always collect them separately and bring them to the appropriate collection point in your community or region Wacom professional pen tablet products comply with the European Union RoHS Directive 2002 95 EC ROHS Directive You are urged to properly dispose of any waste battery or accumulator by bringing it to an appropriate collection point for recyclable materials in your community or region By doing this you can help improve the environment of your community as well as minimise the potential negative effects created for the environment and human health should any of the substances used in batteries and accumulators reach the environment during the disposal process Within the European Union items identified by the above symbol shall not be treated as unsorted municipal waste according the Directive 2006 66 EC of the European Parliament and of the Cou
84. l slice for which Label to customize settings secs Cmd 3 Choose the FUNCTION S to perform Please make sure you have a button set to Radial Menu Default Note Press the ENTER RETURN key to add multiple lines of text Returns the currently displayed Radial Menu layout to its default values Contents Index a le lt D 57 int Uos Contents professional pen tablet WORKING WITH DISPLAY TOGGLE DISPLAY TOGGLE is available only on multiple monitor systems This feature allows you to work with your tablet on all displays or on one display at a time See working with multiple monitors After setting an ExpressKey to DISPLAY TOGGLE you can then press that button to sequentially toggle the current tablet mapping between a base mapping the current setting from the MAPPING tab and other monitors For example 1 The entire display area of a multi monitor system is set up for extended mode and assigned to the active area of the Intuos4 tablet 2 Pressing a tool button to which the DISPLAY TOGGLE function has been assigned toggles the tablet mapping to the next display in sequence Contents Index INTUOS professional pen tablet Contents In the Wacom Tablet control panel the DISPLAY TOGGLE tab is automatically available when the Intuos4 tablet is installed on a multi monitor system This tab lets you set which monitor s will be included in the toggle sequence O
85. lays the ALL icon which contains tool settings that apply to all of your applications In the example below no application specific settings have been added for the GRIP PEN The ALL icon is displayed and the GRIP PEN will have the same settings in all applications Funeti ns 4 Pen Tool Application All e When application specific settings are added to the APPLICATION list the ALL icon changes to ALL OTHER and an application icon is displayed for the newly added application s ons Pen E Application ae All Other Photoshop L ka L_ In the above example application specific settings have been added for the GRIP PEN If you select the ALL OTHER icon and make changes to the tab settings your changes will apply to the GRIP PEN in all applications except those which you have added to the APPLICATION list If you select an application icon and make changes to the tab settings your changes will apply to the GRIP PEN only while you are using that application Tool When you create application specific settings you are creating a separate group of settings for the selected tool and application See the following sections for more details Creating an application specific setting Changing application specific settings Removing application specific settings Tip To review the ExpressKeys or Touch Ring function settings for the current front most application set an ExpressKey
86. lete the tablet preferences as follows Single user When the utility starts select CURRENT USER and click on the REMOVE button Log out then log back in When the tablet driver loads it will create a new preferences file with the factory defaults Multiple users When the utility starts select ALL USERS and click on the REMOVE button Log out then log back in When the tablet driver loads it will create new preferences files with the factory defaults You can quickly restore tablet preferences that have been backed up for the CURRENT USER or ALL USERS by clicking on the RESTORE button within the utility Note Do not manually remove the WACOM TABLET PREFPANE file from the main LIBRARY PREFERENCEPANES folder This file is only to be removed when uninstalling the tablet software driver and then only when using the WACOM TABLET UTILITY Ink does not work correctly There may be a problem with the Ink preferences Remove the with Intuos4 damaged preference files as follows They will be re created when you enable handwriting recognition 1 Open the SYSTEM PREFERENCES pane choose SHOW ALL and select INK Then turn off handwriting recognition 2 From the Go menu choose your HOME Open the LIBRARY and PREFERENCES folders Remove the following preferences e COM APPLE INK FRAMEWORK PLIST e COM APPLE INK INKPAD PLIST e COM APPLE INK INKPAD SKETCH 3 Go back to SYSTEM PREFERENCES and INK and then enable handwriting reco
87. lets Advanced options Optimizing the ExpressKeys display Using applications integrated for tablet control Using the optional Intuos4 Mouse Using the optional Airbrush and Art Pen Pen and digital ink capabilities in Windows About the Windows Tablet PC Input Panel Product specifications Intuos4 Wireless tablet model PTK 540WL Intuos4 Grip Pen model KP 501E 01 Intuos4 Mouse model KC 100 Intuos4 Airbrush model KP 400E 01 Intuos4 Inking Pen model KP 130 01 Intuos4 Art Pen model KP 701E 01 Intuos4 Classic Pen model KP 300E 01 Product information Contents 19 80 81 81 82 83 83 84 85 85 86 86 87 88 88 89 90 91 92 93 93 94 94 94 95 95 95 96 Index Ordering parts and accessories Available parts and accessories Radio and television interference FCC notice Industry Canada Canada only CE declaration Precautions Warnings Safety precautions for Lithium lon batteries Cautions License and Warranties Worldwide Except for Europe Africa and Middle East Software License Limited Warranty Warranty Service in the U S A and Canada Warranty on Sales Outside of the U S A and Canada Licence warranty conditions Europe Africa and Middle East Software Licence Agreement Limited Warranty GLOSSARY INDEX 96 97 99 99 100 100 101 101 102 103 104 104 104 105 106 107 107 108 110 113 int Uos Contents professional pen tablet ABOUT THE MANUAL Thi
88. ll Other Photoshop JL e A tablet cannot be deleted from the control panel list unless it is attached to the computer Your current selections are highlighted See also working with tablet properties gong The TOOL list displays an icon for the tablet FUNCTIONS and for the different tools that have been used on the tablet See also working with multiple tools The APPLICATION list lets you define tool settings that apply only to a specific application See application specific settings See also installing multiple tablets and changing the tablet mode options Note The APPLICATION list is for advanced users it is not necessary to select or add applications in order to customize your Intuos4 tool s Contents Index a le lt D 35 INEUOS oenen TEEF WORKING WITH TABLET PROPERTIES The Wacom Tablet control panel provides you with direct feedback about the power status of your tablet percentage of battery charge remaining for the ASSURE E ae connected tablet e A status bar indicates tablet is in use and pa shows an approximation of the remaining Each icon within the TABLET list shows the battery charge Tool E m ol e Awarning symbol within the status bar Functions Grp Pen E a indicates tablet is in use and the battery Sop mir charge is nearly empty Application A a All Other Photoshop se e A lightning bolt within the status bar which now resembles a bat
89. ll need to delete the paired connection from the Bluetooth devices control panel for your operating system MANAGING YOUR TABLET PREFERENCES Use the Wacom tablet preferences utility to manage your tablet preferences for a single or multiple users For Windows first close any open applications Then open the utility by clicking the START icon and selecting ALL PROGRAMS Select WACOM TABLET and WACOM TABLET PREFERENCE FILE UTILITY e To remove preferences for the current user click on the REMOVE button under My PREFERENCES e To delete preferences for multiple users click on the REMOVE button under ALL USER PREFERENCES Administrator rights are required to delete preferences for all users Relaunch any currently open tablet aware applications that you may be running e To back up your preferences click on the BACKUP button under My PREFERENCES e To restore preferences that you had previously backed up click on the RESTORE button under My PREFERENCES Be sure to carefully follow any prompts that may appear For Macintosh open the main APPLICATIONS folder Then open the WACOM TABLET folder and run the WACOM TABLET UTILITY e To remove preferences select CURRENT USER or ALL USERS Then click on the REMOVE button Log out then log back in When the tablet driver loads it will create a new preferences file with the factory defaults e To back up your preferences select CURRENT USER or ALL USERS Then click on the BACKUP but
90. lso that a tablet ExpressKeys icon is visible for each corresponding ExpressKey 4 When you are done click on the CLOSE button to exit the dialog box Important Remember that some applications can override and control the ExpressKey functions Consider closing any open applications except the Wacom Tablet control panel when testing the ExpressKeys For details see using applications integrated for tablet control Content Ind en 2 int Uos Contents professional pen tablet TESTING THE OPTIONAL MOUSE 1 With the DIAGNOSTICS dialog box open place the Intuos4 Mouse on the tablet s active area and test by clicking each mouse button A tablet status LED should brighten and the SWITCHES state should change for each button you click Wacom When the DIAGNOSTICS dialog box is first opened the WHEEL status should be 0 Move the fingerwheel backward The WHEEL status should change from 0 to 1 Move the fingerwheel forward The WHEEL status should change to 1 When you are done click on the CLOSE button to exit the dialog box Content Ind piii fi le gt 69 int Uos Contents professional pen tablet TROUBLESHOOTING TABLES If you encounter problems with your Intuos4 tools or tablet refer to the following tables Your problem may be described here and you can try the solution offered Be sure to check the Read Me file for the latest information updates For additional information visit Wacom s w
91. luetooth is a radio frequency technology so it is not necessary for Intuos4 to be in sight of the Bluetooth antenna on your computer The radio frequency can pass through non metallic objects like desks Important Intuos4 is a Class 2 Bluetooth enabled device and can operate for up to 10 meters 33 feet from the Bluetooth antenna of your computer Interference from other networks operating in the 2 4 GHz band other Bluetooth enabled devices connected to your computer especially audio devices or metallic objects located in or along the line of sight can negatively impact the tablet performance and operating distance If you experience connection problems see optimizing the Bluetooth connection for related tips and suggestions Establishing a Bluetooth connection Optimizing the Bluetooth connection Contents Index int Uos Contents professional pen tablet ESTABLISHING A BLUETOOTH CONNECTION Before connecting the tablet ensure your computer has a working Bluetooth configuration that supports the Human Interface Device HID profile If your computer does not have built in Bluetooth support obtain and install a commercially available USB to Bluetooth adapter dongle The process whereby Intuos4 and the computer discover one another for the first time is called pairing The following is an overview For detailed instructions on pairing a Bluetooth enabled device to your computer and specific Bluetooth con
92. ly recycle old batteries CARING FOR YOUR TABLET AND TOOLS Keep your Intuos4 tools and tablet surface clean Dust and dirt particles can stick to your tools and cause excessive wear to the tablet surface Regular cleaning with a soft damp cloth will help to prolong the life of your tablet surface and tools you can also dampen the cloth using a very mild soap diluted with water Do not use volatile liquids such as paint thinner or benzene because they may damage the plastic case Warning See the safety precautions for Lithium lon batteries Keep your tablet and tools in a clean dry place and avoid extremes in temperature Room temperature is best Also your tools and tablet are not made to come apart Twisting the pen case can break the pen Taking apart the product will void your warranty Important Take care to never spill liquids onto the tablet or input tools Be especially careful of getting the tablet or tool buttons including the pen tip and eraser wet they contain sensitive electronic parts that will fail if liquids enter them Content Ind en 2 int Uos Contents professional pen tablet REPLACING THE PEN TIP The pen tip nib will wear with normal use Excessive pressure will cause it to wear sooner Replace the nib when it gets too short less than 1 mm 0 04 inch or develops a flat point 1 Unscrew the pen stand base to access the nib extraction tool and replacement nibs Nib extractor
93. m com cn Software updates Simplified Chinese Korea Worldwide Web http www wacomkorea com Software updates Korean Taiwan Worldwide Web http www wacom com tw Software updates Traditional Chinese Content Ind ee a int Uos Contents professional pen tablet APPENDIX This section contains a variety of information tips on caring for your tablet and tools instructions on how to uninstall the tablet software your license and warranty and more Tablet installation Battery life information Replacing the tablet battery Caring for your tablet and tools Replacing the pen tip Uninstalling the software Managing your tablet preferences Changing the tablet mode options Installing multiple tablets Advanced options Optimizing the ExpressKeys display Using applications integrated for tablet control Using the optional Intuos4 Mouse Using the optional Airbrush and Art Pen Pen and digital ink capabilities in Windows About the Windows Tablet PC Input Panel Product specifications Product information Ordering parts and accessories Available parts and accessories Radio and television interference Precautions License and Warranties Worldwide Except for Europe Africa and Middle East Licence warranty conditions Europe Africa and Middle East TABLET INSTALLATION For detailed instructions please review the Quick Start Guide that came with your tablet See also establishing a Bluetooth connecti
94. n USE MOUSE ORIENTATION is selected moving the mouse forward moves the screen cursor up In this mode a reduced inset portion of the active area is available for mouse tracking This is the default setting for all Intuos4 tablets Select MOUSE MODE to move the screen cursor with a pick up and slide motion similar to using a traditional mouse Mapping Mouse Tracking Orientation ExpressKeys Lett Use Tablet Orientation Mode Pen Mouse Use Mouse Orientation Mouse Acceleration Mouse Speed Sets the screen cursor acceleration al a Off High Slow Fast Default Select a slower or faster screen cursor tracking speed Notes You can switch between PEN MODE and MOUSE MODE by using the screen Radial Menu If you frequently switch between PEN MODE and MOUSE MODE you also can assign the MODE TOGGLE function to one of your tool buttons Contents Index a le lt D 47 int Uos Contents professional pen tablet ORIENTATION From the MAPPING tab you can choose a different tablet ORIENTATION and then physically rotate your tablet to match the selection you have made This feature allows you to set up the tablet controls for left or right handed use or to configure your tablet to work with a tall monitor See configuring the tablet orientation EXPRESSKEYS LEFT Tablet orientation is horizontal with Touch Ring and ExpressKeys located to the left This is the orientation for right handed users E
95. n a good posture at all times Minimize awkward postures and repetitive movements that cause discomfort e Change your position if you feel any discomfort due to your work position e For right handed use position the tablet so the drawing active area is located to the right of the ExpressKeys If using the tablet as a primary pointing device and mouse replacement consider placing it to the right of your keyboard e For left handed use position the tablet with the drawing area to the left of the ExpressKeys See configuring the tablet orientation for details If using the tablet as a primary pointing device and mouse replacement consider placing it to the left of your keyboard e lf using the tablet primarily as a creative tool consider placing the tablet below the keyboard centered with respect to your monitor Note regarding RSI Wacom makes no representation promise or guarantee that Wacom products will cure or prevent in whole or in part mouse induced repetitive stress symptoms injuries or conditions Individual results may vary Always obtain competent medical advice to determine the most appropriate treatment for your specific situation Contents Index int Uos Contents professional pen tablet CONFIGURING THE TABLET ORIENTATION You are prompted to choose a default tablet orientation when installing the tablet using the Intuos installation CD At the log in and user switching screens the tablet orien
96. n the DISPLAY TOGGLE tab all monitors are selected in the toggle sequence by default Uncheck any monitor you want removed from the toggle sequence The base mapping is the tablet and display mapping that is defined in the MAPPING tab By default this would include all monitors unless you have defined a specific monitor as your primary monitor in the MAPPING tab As you toggle to the next monitor each tool s active tablet area is mapped to that monitor in PEN MODE Toggling one more time after the last checked monitor returns the system to the base mapping Display Toggle Check one or more displays to toggle v Monitor 1 Generic PnP Monitor w Monitor 2 Generic PnP Monitor Current Setting from Mapping Tab Please make sure you have a button set to Display Toggle When toggling all input tools use Pen Mode and map to one of the checked _disnlavs Default Important When using application specific settings with DISPLAY TOGGLE be sure that each customized application in the APPLICATION list including ALL OTHER has a tool button assigned to DISPLAY TOGGLE The easiest way to do this is to assign DISPLAY TOGGLE to an ExpressKey prior to creating any application specific settings Note that any of the following actions will return the toggle sequence to the base mapping Launching a graphics application that supports pressure sensitivity Logging out of or rebooting the system
97. n traveling in an airplane Turn off the Intuos4 tablet wireless signal by placing the power switch in the off position the battery status light will be off and do not move the power switch to the on position during takeoff transit or landing A Do not use Intuos4 in a facility control system or any other environment that requires extremely high reliability or where the use of a wireless device may cause interference the wireless tablet may interfere with or cause other electronic devices to malfunction or other wireless devices may interfere with or cause the tablet to malfunction Where use is prohibited power off the tablet ensuring the wireless signal has been turned off to prevent the possibility of it interfering with or causing other electronic devices to malfunction Wacom does not accept any liability for direct or consequential damages For details please refer to your Warranty located at the end of this manual Contents Index int Uos Contents professional pen tablet OPTIMIZING THE BLUETOOTH CONNECTION If your screen cursor lags behind the pen movement on the tablet or frequently jumps about or if you see excessive straight line segments when drawing in graphics applications then your Bluetooth connection may not be able to transmit all of the data from the tablet with the necessary speed This may be caused by interference from other radio sources obstructions in the radio wave path excessive distance fr
98. n you feel comfortable with the process you can create more application specific settings CHANGING APPLICATION SPECIFIC SETTINGS To change tool settings for a specific application select the tool and the application and then customize the control panel tab settings REMOVING APPLICATION SPECIFIC SETTINGS To remove an application specific setting 1 Inthe TOOL list select the tool from which you want to remove the application specific setting Then in the APPLICATION list select the application you want to remove 2 Click on the APPLICATION list s button In the dialog box that appears click DELETE to confirm your selection The selected application is removed from the list along with any custom tool settings that you may have created for it Tip To quickly remove all application specific settings from a tool remove the tool from the TOOL list Then place the tool back on the tablet The tool will be added back to the TOOL list using the default settings Content Ind ee d int Uos Contents professional pen tablet TROUBLESHOOTING Most of the time your tablet will work flawlessly But if you are having trouble Wacom recommends you do the following 1 If the Wacom tablet driver failed to load properly first perform the recommended action in any error message that may appear on your screen If that does not solve the problem review the troubleshooting procedures in this chapter Look in the tr
99. ncil of the 6 September 2006 or the corresponding local laws of the Member States Batteries and accumulators for which this is applicable will be marked with the symbol shown at the beginning of this note unless this is not feasible because of the size or the function of the product Batteries used in the Wacom products are subject to the Directive 2006 66 EC and therefore you should always collect them separately and bring them to the appropriate collection point in your community or region Contents Index Contents INTUOS professional pen tablet CONTENTS About the manual Navigating the manual YOUR INTUOS4 WIRELESS TABLET Tablet features Intuos4 pen Battery and power management Battery activation Charging the battery Power saving features Battery status and wireless connection lights Wireless connection Establishing a Bluetooth connection Optimizing the Bluetooth connection USB data connection BEFORE YOU GET STARTED Ergonomics Configuring the tablet orientation Understanding the tablet active area Working with multiple monitors WORKING WITH INTUOS4 Using the Grip Pen Holding the pen Positioning Clicking Dragging Using the side switch Drawing with pressure sensitivity Drawing with tilt Erasing Eye hand coordination exercise Working with the tablet Using the ExpressKeys Using the Touch Ring CUSTOMIZING INTUOS4 Opening the control panel Control panel overview Contents Index Working with tablet
100. ng the ring to zoom in or scroll down in most applications Example of zooming out Move your finger counter clockwise to zoom out or scroll up Touch Ring default settings Setting 1 AUTO SCROLL ZOOM Sets the ring to zoom in most graphics applications and scroll in most other applications Page scrolling is not supported Some applications may interpret zoom events as scroll events or may completely ignore zooming Likewise scroll events may be interpreted as zoom events or ignored i completely Press the toggle button to switch 7 Setting 2 KEYSTROKE CYCLE LAYERS between four customizable states o Enables you to cycle up or down through a As you toggle between settings a 5 stack of layers when working in Adobe corresponding status LED Photoshop Move your finger clockwise along illuminates Any disabled settings the ring to cycle up through layers are skipped in the toggle sequence Setting 3 KEYSTROKE BRUSH SIZE Sets the To resume operations after the ring to increase or decrease the brush size of tablet has entered auto sleep your drawing tool when working in Adobe mode press the toggle button Photoshop Setting 4 KEYSTROKE CANVAS ROTATION Enables you to rotate or flip an entire image when working in Adobe Photoshop Requires Adobe Photoshop CS4 or later Important Some applications can override and control See customizing the Touch Ring to modify the way the Touch Ring functions For details
101. not pair with a computer within 3 minutes e No user input for more than 30 minutes Tablet enters sleep mode e No wireless connection for more than 5 seconds e Battery charge drops below operational level and no external power supply is connected to tablet Connect the USB cable between Intuos4 and a primary USB port located directly on your computer or to a powered USB hub If the LED still does not light the battery should be replaced See replacing the tablet battery If the tablet has automatically turned itself off and there is adequate battery or external power available move the power switch off and then back on or press the Touch Ring toggle button Indicates that the USB cable is attached and the battery is charging Light will change to green when battery is fully charged Note If the light does not go on try turning on the tablet power switch Some USB hubs will not supply power if the tablet is turned off TABLET STATUS No Bluetooth connection between tablet and computer Discoverable mode after pressing the pairing button or turning the tablet power on Tablet is searching for a connection or pairing with your computer See establishing a Bluetooth connection Tablet is connected to computer using a Bluetooth wireless connection Index int Uos Contents professional pen tablet WIRELESS CONNECTION The Intuos4 pen tablet connects to your computer via a wireless Bluetooth connection B
102. ntrol panel s TOOL list simply use the tool on your Intuos4 tablet e When you select a tool that has been added to the TOOL list the appropriate tab settings for that tool are displayed Any changes you make to the tab settings will then apply to that tool Your changes take effect immediately e Identical tools will use the same settings To remove a selected tool from the TOOL list click on the TOOL list s button In the dialog box that appears click DELETE to confirm your selection The selected tool is removed from the list along with any custom settings you may have created for it A removed tool can be added back to the TOOL list by placing it back onto the tablet All Intuos4 pens have a unique Tool ID In supporting applications such as Corel Painter you can assign different tools to different pens and then change between them by switching the pen in your hand Content Ind ne m a int Uos Contents professional pen tablet APPLICATION SPECIFIC SETTINGS You can customize your Intuos4 tools for use with a particular application For example you may prefer a firm pen tip pressure setting in one application and a soft pressure setting in another The APPLICATION list enables you to add an individual application to the list and then customize your tool settings for that application e When no application specific settings have been created and a tool is selected from the TOOL list the APPLICATION list disp
103. o not place or leave the pen tablet or input tool s within reach of children If your product is used improperly there is a potential for accident or human injury Prevent children from swallowing the pen nib or side switch The pen nib side switch or other movable parts may accidentally be pulled out if children are biting on them Small parts such as the pen nib or nib refills pen side switch or tablet pen stand can be removed and accidentally swallowed by children Do not use the pen tablet in a facility control system that requires extremely high reliability It may cause other electronic devices to malfunction or other devices may cause the pen tablet to malfunction Power off your pen tablet in locations where when electronic devices are not allowed Because the pen tablet may cause other electronic devices to malfunction in some locations where when the use of electronic devices is not allowed such as within an airplane be sure to turn off the pen tablet by moving the power switch to the off position For added security turn off Bluetooth Do not disassemble the pen tablet or input tool s Do not disassemble or otherwise modify the pen tablet or input tool s Such action may cause heat generation ignition electrical shock or other damage including human injury Disassembly of the product will void your warranty Take note of damaged cabling If you notice that your pen tablet cabling is torn or otherwise damaged there is a poten
104. o pen mode Mouse speed A setting that allows you to adjust the speed at which your screen cursor moves when your Intuos4 tool is in MOUSE MODE Nib The replaceable pen tip OLED Organic Light Emitting Diodes OLEDs are made up of semi conductor polymers OLEDs do not need a background lighting to function and thus have a lower power consumption and can be much thinner than LCD panels Pairing A method of creating a virtual cable link between two Bluetooth enabled devices Pairing is the process whereby Intuos4 and the computer discover one another for the first time Pen mode A method of positioning the screen cursor Wherever you place your Intuos4 tool on the tablet the screen cursor will appear at the corresponding point on the screen This is known as absolute positioning and is the default setting for all Intuos4 pen tools Also PEN MODE allows you to quickly position the screen cursor without having to first find it and then move it across the desktop See also mouse mode Pixel The smallest unit of measure on your monitor screen Pressure sensitive A quality of the Intuos4 pen tip and eraser that senses the amount of pressure being applied This is used to create natural looking pen brush and eraser strokes in applications that are pressure sensitive Pressure sensitive application Any application that supports pressure sensitive input Proximity The height above the tablet s active area where the Intuos4 to
105. ol in your application and use the pen to draw a dot at each grid intersection 3 Draw an X at each grid intersection 4 Clear your screen and make a simple drawing of your own The more you use your pen the easier drawing writing and navigation will become Contents Index INEUOS oenen TEEF WORKING WITH THE TABLET The middle section of the tablet is the working or active area for the pen or mouse Wherever you place your pen on the tablet active area the screen cursor will appear at a corresponding point on the screen See using the Grip Pen and using the Intuos4 Mouse for more information Active area ExpressKeys Press the customizable ExpressKeys to perform frequently used functions or keystrokes or to emulate button clicks or modifier keys n Touch Ring Slide your finger around the ring to zoom scroll or perform other custom actions Press the toggle center button to toggle between four customizable states As you toggle between settings a corresponding status LED illuminates ExpressKeys display Shows the current ExpressKey settings See optimizing the ExpressKeys display See battery and power management for detailed information about tablet power management Content Ind ne w a INTUOS es a l q D 31 USING THE EXPRESSKEYS Press individual keys to perform frequently used functions or keystrokes ExpressKeys can also be used to modify your pen or other input tool
106. oll up Some applications may interpret zoom events as scroll events or may completely ignore zooming Likewise scroll events may be interpreted as zoom events or ignored completely KEYSTROKE CYCLE LAYERS Sets the ring to cycle up or down through a stack of layers KEYSTROKE BRUSH SIZE Sets the ring to increase or decrease the brush size of your drawing tool KEYSTROKE CANVAS ROTATION Enables you to rotate or flip an entire image in Adobe Photoshop CS4 or later To customize the ring for other actions select the KEYSTROKE option You can then define a custom keystroke function To learn which keystroke shortcuts are supported by a particular application see the documentation that came with the application Choose SKIP to set the Touch Ring toggle button to skip a function state in the toggle sequence See using the Touch Ring for more information Important Some applications can override and control the Touch Ring functions For details see using applications integrated for tablet control Content Ind ne w aM Int Uos Contents professional pen tablet TABLET TO SCREEN MAPPING Select the MAPPING tab to define the relationship between tool movement on the tablet surface and cursor movement on the monitor screen By default the entire active area of the tablet maps to the entire monitor If more than one monitor is in use the tablet will map to all monitors See working with multiple monitors MODE options
107. ols are detected See also positioning D Contents Index int Uos Contents professional pen tablet Radial Menu A hierarchical menu in radial format Each level of the menu consists of eight menu slices which may contain various features and options to choose from You can customize the buttons of your Intuos4 tools or tablet to display this menu Screen cursor The pointer on the display screen Screen cursors come in different shapes such as an l beam arrow or box depending on which application you are running Tablet PC Input Panel TIP The Microsoft Windows Tablet PC Input Panel enables you to use your Intuos4 pen to create handwritten notes or work with an on screen keyboard The Input Panel dynamically converts your handwriting to text Information you create can then be inserted into other documents spreadsheets or illustrations See pen and digital ink capabilities in Windows Tilt sensitive A quality of the Intuos4 pen tip and eraser that senses the amount of tilt between the tool and tablet This is used to create natural looking pen brush and eraser strokes in applications that are tilt sensitive Tool ID A unique serial number in each Intuos4 tool Some graphics applications such as Corel Painter recognize Tool IDs and allow you to assign different settings and brushes to every Intuos4 tool e g two Grip Pens Switching between the settings and brushes then becomes as easy as switching between the
108. om the computer or a combination of the above Try the following actions to improve your Bluetooth connection and optimize tablet performance e Remove any metallic objects that may be in the line of sight between Intuos4 and your Bluetooth antenna or adapter e f you are using a USB to Bluetooth adapter dongle use a USB extension cable and place the adapter on your desktop or somewhere in sight of Intuos4 e Use Bluetooth support that complies with Bluetooth Specification v2 1 and supports the EDR Enhanced Data Rate protocol Contact the manufacturer of your Bluetooth support for details e Usea Class 1 Bluetooth adapter dongle on your computer e fyou are using a computer with a built in Bluetooth antenna try reorienting the computer until you get a better data rate e Move the tablet closer to your computer s Bluetooth antenna e Disconnect any Bluetooth audio devices such as headsets that may be connected to your computer e Switch off any other devices operating in the 2 4 GHz radio spectrum such as WiFi networks mobile telephones etc or move their antennas further away from your computer USB DATA CONNECTION When using the tablet with a computer that is not Bluetooth enabled or in a situation where a wireless network is prohibited Such as on an airplane you can use Intuos4 Wireless as a wired USB tablet Attach the USB cable to the tablet Then connect the other end to a primary USB port located directly on
109. on Contents Index int Uos Contents professional pen tablet BATTERY LIFE INFORMATION All batteries age over time and gradually lose their ability to hold a charge The typical life span of a Li lon battery is two to three years whether it is used or not You will need to purchase a new tablet battery when it is no longer capable of holding an adequate charge For information on ordering a replacement battery see ordering parts and accessories Batteries can also be purchased at various retail outlets e The life and performance of Li lon batteries is not improved by cycling discharging and recharging the batteries e Cool storage and keeping the battery in a partially not fully charged state when not in use can slow the aging process e Always charge your tablet battery whenever the low battery warning appears on your display screen or at the latest when the tablet battery status light begins to flash red To reduce the power consumption of an empty battery the tablet will enter an auto shut down state whenever the battery level is very low In this state the tablet will continue to draw a small amount of power The power switch must be turned off and the battery must be recharged e The tablet will draw current from the battery whenever the power switch is in the on position A small Current is drawn even in auto sleep and tablet auto shut down modes and will slowly discharge the battery It is a good idea to charge t
110. or use with multiple monitors After you have correctly configured your computer for use with multiple monitors you can then adjust the tablet to screen mapping by opening the Wacom Tablet control panel and changing the appropriate options For example you can map to a single monitor or to a portion of the monitor area Tip When your system is configured with multiple monitors you can assign the DISPLAY TOGGLE function to an ExpressKey This enables you to toggle the current tablet mapping and screen cursor between the system desktop or primary display and your other monitors See working with Display Toggle Content Ind ee 2 int Uos Contents professional pen tablet WORKING WITH INTUOS4 This section describes how to use your tablet and input tools and includes exercises for new users If you are new to using a pen tablet and tablet input tools read the following sections Using the Grip Pen Working with the tablet USING THE GRIP PEN The pen is cordless battery free and pressure sensitive There are four basic techniques for using the pen on the active area of the tablet pointing clicking double clicking and dragging If you are unfamiliar with using the pen try the exercises on the following pages Holding the pen Positioning Clicking Dragging Using the side switch Drawing with pressure sensitivity Drawing with tilt Erasing Eye hand coordination exercise Contents Index int Uos Contents
111. ou program one button to simulate the CTRL key and another to simulate an ALT keystroke when you press both buttons a CTRL ALT is simulated Note To configure the Intuos4 Mouse for left handed use simply reassign the button functions as needed You can also open the Wacom Tablet control panel click on OPTIONS and select LEFT in the MOUSE HANDEDNESS group Content Ind ne w 2 int Uos Contents professional pen tablet CUSTOMIZING THE TABLET FUNCTIONS To customize the ExpressKeys Touch Ring and other tablet features open the Wacom Tablet control panel and select the FUNCTIONS icon in the TOOL list Select a tab to customize and change settings using the available options Customizing the ExpressKeys Customizing the Touch Ring All A N lication specific settings PTT PTTL PaCS CPT SEEEEE Using and customizing the Radial Menu Contents Index Contents INTUOS professional pen tablet CUSTOMIZING THE EXPRESSKEYS When you open the EXPRESSKEYS tab the current functions are shown in the corresponding pull down menus As an additional reference the tablet ExpressKeys display provides a visual indication of the ExpressKey settings When using Intuos4 the ExpressKeys display automatically updates to show the key settings for the application that is currently in the foreground If an ExpressKey has been disabled there will be no display for that key Note To set the brightness o
112. oubleshooting tables Your problem may be described there and you can try the solution offered Open the Wacom tablet Read Me file for any information updates Test your tablet and input tools See testing your tablet and testing your tools If you are having a compatibility conflict between Intuos4 and a new hardware or software product see obtaining driver downloads for information on downloading an updated software driver Wacom periodically updates the software driver to maintain compatibility with new products Check the FAQs Frequently Asked Questions on the Wacom web site for your region If you have tried the suggestions in this manual and still cannot resolve the problem then contact Wacom for Technical Support See technical support options and the Read Me file for information on where to obtain support for your region Testing your tablet Testing your tools Troubleshooting tables Technical support options Obtaining driver downloads Content Ind ee a int Uos Contents professional pen tablet TESTING YOUR TABLET Turn on your computer and wait until the system has fully loaded Ensure that your computer has a working Bluetooth connection either through built in Bluetooth support or a USB to Bluetooth adapter dongle 1 Check the tablet connection in USB mode A tablet status LED will light whenever the tablet is properly connected via the USB cable and your computer has registered it as a USB device If an L
113. our Wacom tablet with the application See the documentation provided with your application for any specific details on functionality and how to customize or disable this feature If an automatic prompt or the application s documentation does not describe how to disable this behavior you can use the Wacom Tablet control panel to create application specific settings which will override the behavior of the integrated application Important If an application specific setting has been created for an integrated application setting an ExpressKey or Touch Ring function to APPLICATION DEFINED will allow the integrated application to control the function Content Ind ee 2 int Uos Contents professional pen tablet USING THE OPTIONAL INTUOS4 MOUSE The Intuos4 Mouse is cordless battery free and works on any Intuos4 tablet The mouse is an optional accessory and product configurations may vary Fingerwheel Can be rolled or pressed for an additional button function e Roll the fingerwheel to scroll in most windows and applications Move the wheel forward to scroll up and back to scroll down e Press down on the wheel to perform a MIDDLE CLICK Tip For Microsoft Office applications that support a wheel mouse press the CTRL key and move the fingerwheel to zoom in and out Right button Displays a context menu when pressed Left button This is the primary button used to CLICK and select The programmable mo
114. professional pen tablet NAVIGATING THE MANUAL Use the navigation controls to move through the manual a Go to front page Contents Go to table of contents Index Go to index le Go back to previous view lt D Page back or page forward topic Go to topic D Topic continued Adobe Reader provides additional tools for using and printing the manual See the Adobe Reader help for more information Contents Index int Uos Contents professional pen tablet YOUR INTUOS4 WIRELESS TABLET This section introduces you to the Intuos4 Wireless professional pen tablet Intuos4 consists of two basic elements a wireless tablet that serves as your work area and the input tools you use on the tablet The quickest way to learn about Intuos4 is to become familiar with its appearance and features Tablet features Intuos4 pen Battery and power management Wireless connection USB data connection TABLET FEATURES Status LEDs Wireless connection light e An LED will glow dimly when the tablet See establishing a Bluetooth is on and brighten when a tool button connection is pressed e LEDs also indicate which of the four Battery status light Touch Ring functions are active Touch Ring Includes toggle button at center of ring Press to e Toggle between Touch Ring functions e Wake tablet from auto sleep mode ExpressKeys Active area This is the active area for pen input Learn about your Intuos4
115. properties as you work The ExpressKeys can also be operated in combination with one another For example if you program one key to simulate the CTRL key and another to simulate an ALT keystroke when you press both keys at the same time a CTRL ALT is simulated ExpressKeys configuration when ExpressKeys configuration when positioned on the left side of the positioned on the right side of the tablet EXPRESSKEYS LEFT tablet EXPRESSKEYS RIGHT ExpressKey default settings SHOW SETTINGS RADIAL MENU PRECISION MODE DISPLAY TOGGLE PAN SCROLL The ExpressKeys display automatically updates to show the current ExpressKey settings for the active application If an ExpressKey has been disabled there will be no display for that key See optimizing the ExpressKeys display and customizing the ExpressKeys Important Some applications can override and control the ExpressKey functions For details see using applications integrated for tablet control Tip In Adobe Photoshop and many other graphics applications the ALT CTRL and SHIFT keys can be used to modify a tool or switch to an alternative tool while the key is pressed Content Ind ne w EM INtTUOS Contents lt professional pen tablet 32 USING THE TOUCH RING Slide your finger around the ring to zoom in or out scroll up or down or to issue the assigned keystroke functions Example of zooming in Move your finger clockwise alo
116. r ink with pressure sensitivity move the pen along the surface of the tablet while applying various amounts of pressure downward on the tip of the pen Press hard for thick lines or dense color Press gently for thin lines or softer color Note that some applications require you first select a pressure sensitive tool from the application s tool palette To adjust the tip feel see adjusting tip feel and double click Visit our web site for a list of applications that support pressure See product information DRAWING WITH TILT The tablet recognizes when you tilt the pen from vertical to inclined positions In some drawing applications tilt can be used to control line shape and thickness This is like working with an airbrush where tilt can be used to make a line thin when the tool is vertical or wide when the tool is tilted In other applications you can adjust tilt to define brush characteristics such as width color and opacity To test tilt draw a curve in a graphics Q application such as Corel Painter that supports tilt Be sure the tilt function in your application is active then change the tilt of the pen as you draw to vary the shape and thickness of the brush stroke You can adjust the brush characteristics within your application to create different effects To adjust the amount of pen tilt required to produce a desired tilt effect in your application see customizing tilt sensitivity Visit our web
117. r logging in each user can customize their personal settings in the Wacom Tablet control panel Switching to another user will automatically load the settings for that user Content Ind ee a INTUOS Contents lt professional pen tablet 34 CONTROL PANEL OVERVIEW Use the Wacom Tablet control panel to customize your Intuos4 tablet or input tools The upper portion of the control panel displays icons representing your TABLET TOOL and APPLICATION settings TOOL settings Choose FUNCTIONS to customize your ExpressKeys Touch Application lt A dia Ring and Radial Menu settings Tabs display i Pen Eraser Mapping customizable settings Mapping Choose PEN to for the selected TOOL Tilt Sensitivity A customize your 5 Double Click 7 Intuos4 pen settings i j B If you have an optional Normal Pigh Right Click Intuos4 Mouse Tip Feel choose MOUSE to J customize the mouse ee E E Tip Double Click Distance settings Soft Firm Details a E Displays tablet and et eee Off Large Returns the selected software information o tab to its default including an option to Click Full Click eT settings access the DIAGNOSTICS Ss dialog box About Options Help Displays advanced options Displays help options Experiment with different settings to find what works best for you Any changes you make will take effect immediately Click DEFAULT to return a tab to the factory settin
118. rations ensure that your computer s Bluetooth support is working and that your tablet is within range Then press the Touch Ring toggle button or move the power switch off and back on e Tablet auto shut down When the battery level is low the tablet will automatically shut down When in tablet auto shut down mode the tablet will not function Recharge the battery immediately or move the power switch to the off position Important If the power switch is left on even in tablet auto shut down mode a small trickle of current will continue to flow leading to eventual battery failure See also working with tablet properties Contents Index int Uos Contents professional pen tablet BATTERY STATUS AND WIRELESS CONNECTION LIGHTS Observe the battery status and wireless connection lights to check the operational status of the tablet BATTERY STATUS LIGHT Green Red Red flashing Off Yellow WIRELESS CONNECTION LIGHT Off Blue flashing Blue Contents TABLET AND BATTERY STATUS High battery charge 35 to 100 remaining Low battery charge 15 34 remaining Very low battery charge less than 15 remaining You need to recharge the battery now Tablet has been turned off either manually or automatically or no battery charge Any of the following conditions can prompt the tablet to power off e You move the power switch to the off position e After you press the pairing button the tablet does
119. reason please contact us by post at this address WACOM Europe GmbH Europark Fichtenhain A9 47807 Krefeld GERMANY Contents Index int Uos Contents professional pen tablet GLOSSARY Active area The drawing area of the tablet where your Intuos4 tools are detected Application specific settings Intuos4 tool and tablet settings that have been customized for individual applications The Wacom Tablet control panel enables you to customize a tool to behave uniquely in different applications Application specific settings are in effect whenever you use the application Aspect The ratio between the vertical and horizontal dimension of the tablet or display Bluetooth A standardized wireless technology and Specification Manufacturers build Bluetooth wireless technology into their products in order to create Bluetooth enabled devices providing seamless voice and data connections between a variety of wireless devices operating at short range to one another Click force The amount of force you must apply to the pen tip for a click to occur Digital Ink A broad category that typically describes handwritten content which as been created using pen based input on a computer This handwritten content takes the form of sketches ink mark up or handwriting The handwriting can optionally be converted to typewritten text or simply left alone for use in its original format Depending on your system and applications settings the handwritt
120. ressly forbidden 4 Use Restrictions You may not decompile reverse assemble disassemble or reverse engineer the Software 5 Termination This License is effective until terminated This License will terminate automatically without notice from Wacom if you fail to comply with any provisions of the License 6 Miscellaneous This License is governed by the laws of the United States of America and the state of Washington except in Asia Pacific and by the laws of Japan for Asia Pacific LIMITED WARRANTY Wacom warrants the product to the original consumer purchaser except for the Software and consumable items such as the battery and pen nibs to be free from defects in materials and workmanship under normal use and service for a period of two 2 years from the date of original retail purchase as evidenced by a copy of the receipt and registration with Wacom within 30 days of purchase The Software is licensed as is Wacom makes no warranty with respect to its quality or performance Wacom cannot guarantee you uninterrupted service or the correction of any errors Upon discovery of a defect in the product except in the Software within the Warranty Period you should contact Wacom Technical Support via telephone email or fax to obtain an RMA Return Merchandise Authorization number and instructions for shipping the product to a service location designated by Wacom You should send the product shipping charges prepaid to the designat
121. rgeable Lithium lon Li lon battery designed for your tablet For information on ordering a replacement battery see ordering parts and accessories Batteries can also be purchased at various retail outlets Important Only use a Wacom battery specified for your tablet To replace the tablet battery 1 Turn the wireless tablet upside down and open the battery cover Use your fingernail to press inward on the latch bar and flip the cover outward to open 2 Carefully remove the old tablet battery 4 Close the battery cover Important When replacing the tablet battery 3 Align the battery terminals of the new battery with the spring loaded tablet contacts and press the be careful not to drop it on hard surfaces The battery can be damaged internally when battery into the compartment as shown To avoid damaging your tablet first insert the terminal end of dropped and should be replaced even if the battery Q gt a there is no obvious damage This will help XI YH prevent any future damage that could occur o to the tablet if the battery has been dropped Is installed in the tablet and then later Many communities offer voluntary or mandatory recycling programs for batteries Properly recycle the old develops a short or leak while in the tablet battery by following all applicable laws and in accordance with the safety precautions for Lithium lon batteries Keep batteries out of the reach of children and prompt
122. ry in any manner Puncturing crushing heating exposure to water or fire disassembly shorting the terminals or other types of abuse may cause the battery to explode or ignite and potentially cause a fire or personal injury e Use only the correct battery provided by Wacom and be careful not to drop it on hard surfaces The battery can be damaged internally when dropped and should be replaced even if there is no obvious damage This will help prevent any future damage that could occur to the tablet if the battery has been dropped is installed in the tablet and then later develops a short or leak while in the tablet e Do not use a battery that is visibly deformed in any manner A deformed battery has the potential to rupture or generate heat smoke or fire e Do not attempt to install the battery backwards or reverse the polarity If you do so you may damage the tablet cause a fire or personal injury may result e Only use a Wacom battery specified for your tablet NEVER attempt to use or charge other battery types in your tablet Doing so may damage the tablet cause a fire or personal injury may result Doing so will also void your warranty e Do NOT attempt to charge the tablet battery with any power adapter that does not meet the specifications required for your Intuos4 tablet Doing so may damage the tablet cause a fire or personal injury may result Doing so will also void your warranty You can charge the tablet by connecting i
123. s manual provides quick access to information about Intuos4 The information is common to Windows and Macintosh computers and Windows screen captures are shown unless otherwise noted e Go directly to contents or index topics by clicking on them e Your Intuos4 Wireless tablet introduces you to the various features of your wireless pen tablet and input tools Information is also included for battery and power management and details on making a wireless connection e Before you get started provides knowledge points that will help you work more comfortably with the tablet and to better understand how you and the tablet interact with your computer e Working with Intuos4 is the learning chapter It describes how to use your tablet and input tools and includes exercises for new users e Customizing Intuos4 describes how to optimize your Intuos4 tablet and tools for the way you like to work e Want to test your tablet and tools Need troubleshooting guidelines Troubleshooting is where you will find the answers to most common questions e The appendix includes more information related to your tablet Included are tips about getting the most from your tablet battery tips on product care a how to on uninstalling the software your license and warranty and more Also included is an overview of the pen and digital inking capabilities found in Microsoft Windows 7 and Vista Note This manual does not describe how to install your Wacom tablet Ple
124. se and the OPEN RUN option you have selected will be assigned as your tool button option Simply press the tool button to launch the assigned option If your selection is for the Radial Menu it will be displayed in the Radial Menu Macintosh Toggles the ink in any application function of Ink on and off EXPOSE Ink automatically recognizes and converts your handwriting into text and inserts it into a document Handwriting recognition must be turned on for this function to work See your Macintosh help for information on working with Ink Macintosh Tiles all open windows To access this option first choose KEYSTROKE and then click on the ADD SPECIAL menu within the dialog box PRESSURE HOLD PRECISION MODE Locks the pressure at the current pressure level until the button is released For example you can paint with pressure sensitivity until you reach the brush size that you like You can then press the button and continue painting with the same size brush until the button is released Changes the mapping around the current pen tip position such that you must move the pen twice as far for the screen cursor to cover the same distance on the display screen To activate press and hold the tool button to which this function is assigned Releasing the button returns to normal mapping When your tool is in MOUSE MODE screen cursor movement is adjusted to act as if acceleration were off and speed set to slow Cont
125. see using your tablet Touch Ring works applications integrated for tablet control Content Ind ne m ad INEUOS ones TEEF CUSTOMIZING INTUOS4 After you master the basics of using Intuos4 you may want to customize the way the tablet or input tools work This chapter describes how to adjust your tablet and tool settings Included is information about each control panel tab and some of the more difficult concepts Many of the sections also contain useful customizing tips Advanced users can learn how to further optimize Intuos4 by creating application specific settings Opening the control panel Control panel overview Working with tablet properties Customizing the pen Customizing the optional mouse Customizing the tablet functions Tablet to screen mapping Button functions Using and customizing the Radial Menu Working with Display Toggle Working with multiple tools Application specific settings OPENING THE CONTROL PANEL To open the Wacom Tablet control panel use the Intuos4 tool you wish to customize on the tablet e Windows Click on the Windows START button and choose ALL PROGRAMS Then select WACOM TABLET and choose the WACOM TABLET PROPERTIES option e Macintosh Open SYSTEM PREFERENCES from either the Dock the Apple menu or from the APPLICATIONS folder Then click on the WACOM TABLET icon After opening the control panel you can begin customizing Intuos4 Note User specific preferences are supported Afte
126. set the tool to its default condition To quickly return a tool to the default settings remove it from the TOOL list by clicking on the control panel list s button After the tool has been removed place it back onto the tablet The tool will be added back to the TOOL list with its default settings To test your input tools e Inthe Wacom Tablet control panel click on the ABOUT button In the dialog box that appears click on the DIAGNOSE button The DIAGNOSTICS dialog box displays to show dynamic information about the tablet hardware and pointing devices including the battery status of the currently selected tablet e If you have more than one tablet connected to your system in the TABLET INFO column select the tablet for which you are testing your tool e Use the information presented in the DIAGNOSTICS dialog box when testing your tablet and tools Note When testing your tool buttons if a button is set to RADIAL MENU or OPEN RUN that function will occur when the button is pressed In this case you may want to change that button function before testing Diagnostics Driver Info Version 6 1 3b1 Tablet Info Tablet Intuos4 WL Model Intuos4 WL Version 1 20 Left Buttons All Switches Open Right Buttons All Switches Open Left Touch 0 OEM Code 0 Battery Status EDR Supported Contents Pointing Device Info Proximity Out X Data 111 0 mm Y Data 64 7 mm Switches All Switches Open Pre
127. setting for the pen When positioning the screen cursor and operating a pen button the pen tip needs to be within 10 mm 0 39 inch of the tablet surface The pen tip does not need to touch the tablet in order to move the screen cursor or use the side switch All Intuos4 tools including the Intuos4 Mouse work only over the active area of the tablet 10 mm 0 39 inch a e e In Mouse MODE the default setting for the Intuos4 Mouse you move the cursor with a pick up and slide motion similar to using a regular mouse Contents Index a le lt D 25 int Uos Contents professional pen tablet CLICKING Click to highlight or select something on the screen Double click to open it Clicking Tap the pen tip once on the tablet or press the pen tip on the tablet with enough force to register a click There is no audible pen tip click sound Try clicking on a folder icon by moving the screen cursor over the icon and pressing down on the pen tip The folder should highlight when you press Tip You can configure Windows to select when the pen is over an icon and to launch the icon with a single click To turn on this feature first open a folder e For Windows 7 and Vista from the ORGANIZE pull down menu choose FOLDER AND SEARCH OPTIONS From the GENERAL tab select SINGLE CLICK TO OPEN AN ITEM POINT TO SELECT e For Windows XP From the TOOLS pull down menu choose FOLDER OPTIONS From the GENERAL t
128. site for a list of applications that support tilt See product information Contents Index int Uos Contents professional pen tablet ERASING The Intuos4 pen eraser works like the eraser on a pencil You can erase intuitively and naturally in graphics applications that support the pen eraser When you use the pen eraser the application will automatically switch to the eraser tool In applications that support pressure sensitivity you can select pressure sensitive tools in the application s tool palette to vary the width and depth of your erasures as you change the amount of pressure you exert upon the pen See adjusting eraser feel for more information Use the pen eraser in Microsoft Windows 7 Vista and Office 2007 or later to erase notes or sketches made with digital ink and to select and delete text or spreadsheet cells within an application ABCDEFGH IJXI gt Visit our web site for a list of applications that support the eraser See product information If the eraser is not supported in an application you can still use the eraser for positioning drawing or annotation EYE HAND COORDINATION EXERCISE This exercise is designed to retrain your eye hand coordination for using the pen 1 Open any graphics application Use the line tool to draw a rectangular grid with line spacings of about 20 25 mm 3 4 to 1 inch You can use your standard mouse to do this 2 Choose a free hand to
129. slower setting reduces the scroll rate and is useful for close up and detail work where you need precise control of the image Default Cancel OK Pen Scroll Speed Note The Pen Scroll Speed does not affect applications that pan with a grabber hand As you move the pen tip the document or image is repositioned to follow the direction of pen movement on the tablet Release the button or lift the pen tip from the tablet surface when you are done Content Ind ee 2 INTUOS professional pen tablet Contents FUNCTION NAME AUTO SCROLL ZOOM DESCRIPTION Sets the Touch Ring to zoom in most graphics applications and scroll in most SCROLL other applications Sets the Touch Ring for scrolling only action ZOOM SHOW DESKTOP Sets the Touch Ring for zooming only action Minimizes all open windows to display a clean desktop SWITCH APPLICATION Brings up the application switching dialog with focus on the next open application OPEN RUN On Windows 7 and Vista systems running Aero Flip 3D will be activated with focus on the next open applications Opens a dialog box where you can select a specific application file or script to INK TOGGLE launch Click BROWSE to locate an application file or script to launch The selection you make appears in the APPLICATION TO RUN box Click OK to accept the selection Run Applicati Application to run The dialog box will clo
130. ssure 0 Wheel 0 Rotation 0 0 Index Testing a pen Testing the Touch Ring Testing the ExpressKeys Testing the optional mouse D int Uos Contents professional pen tablet TESTING A PEN 1 While observing the POINTING DEVICE INFO column bring your Intuos4 tool within 10 mm 0 39 inch of the tablet active area A value for PROXIMITY the DEVICE NAME DEVICE TYPE and a DEVICE S N serial number should be displayed If you have more than one tablet connected to your system be sure you have selected the TABLET for which you are testing your tools from the TABLET INFO column 2 Move your tool along the tablet surface The X and Y DATA values should change to reflect the tool position 3 Test your Intuos4 pen switches A tablet status LED should brighten each time you click with the tool tip press the side switch or press the tool s eraser to the tablet e Click on the tablet surface with the tool tip the SWITCHES state and PRESSURE value should change PRESSURE should change from approximately 0 with no pressure applied to approximately 100 when full pressure is applied e Press the side switch without pressing the tip to the tablet the SWITCHES state should change For the Intuos4 pen do this for both positions of the side switch Pen Tip 1 Side switch lower position 2 Side switch upper position 3 Eraser 1 Airbrush Tip 1 Side Switch 2 Eraser 1 e Press the tool
131. t CUSTOMIZING THE MOUSE BUTTONS Use your Intuos4 Mouse to open the Wacom Tablet control panel Select the MOUSE tab Mouse Select the function to perform Click Til Right Click z when pressing a button p Ain e een Forward a Back m Middle Click Wheel a Iiii Function Scroll Scrolling Speed Medium Combine With Ctrl Alt __ Shift Default WHEEL options SCROLL KEYSTROKE or DISABLED control the fingerwheel function The default setting is SCROLL SCROLL When selecting SCROLL the tab displays custom scroll options Choose a SCROLLING SPEED to use for each notch of wheel movement When you select one or more COMBINE WITH modifier key options the selected option s will be sent to the application along with each scroll event For example you can create custom zooming or other actions within an application Macintosh The available options are OPTION COMMAND Apple key CONTROL and SHIFT KEYSTROKE Select the KEYSTROKE option to assign custom functions to the fingerwheel This is useful when working with repetitive functions Keystroke s that you define are sent once for each notch of wheel movement Tip To double the speed of a keystroke action enter the keystroke sequence twice within the DEFINE KEYSTROKE dialog box DISABLED Disables the wheel function The mouse buttons are chordable you can press two or more buttons simultaneously For example if y
132. t using the provided USB cable to any powered USB port e Do not overcharge the tablet battery Doing so may damage the tablet cause a fire or personal injury may result e If you will be traveling with your wireless tablet be sure to check with the appropriate regulatory authority for any air or travel restrictions that may apply to Lithium lon batteries e 6 If the tablet becomes excessively warm or emits an unusual smell while the battery is charging immediately disconnect the USB cable if in use and shut down the tablet The same applies if the tablet is connected to an after market power adapter Contact Wacom Technical Support for assistance see technical support options e lf aLi lon battery is discharged below a certain minimum charge it cannot be recharged An internal protection circuit within the battery prevents any charging once the voltage has fallen below a minimum safety level e Properly recycle the old battery in accordance with the battery manufacturer recommendations and follow any applicable warnings e Keep batteries out of the reach of children and promptly recycle old batteries e When recycling the Li lon battery do not carry it loosely in your pocket or in any container that may contain metal objects If transported improperly and metal objects come in contact with the battery terminals the battery could short causing personal injury or fire It is recommended that you cover the terminals with adhesive t
133. t it to your computer The system will automatically find the tablet and initialize it An icon for the tablet will then appear in the control panel Important When installing additional tablets on Windows systems please note that the eraser function may not work in some applications when using the additional tablet s The eraser function will continue to work correctly using the first tablet that was added to the control panel To remove one of multiple tablets from the driver in the Wacom Tablet control panel select the tablet to be removed and click on the button next to the TABLET list e A tablet cannot be deleted from the control panel list unless it is attached to the computer e Note that you will need to restart your computer before you can again add the tablet to the driver Content Ind _ fi le D 86 int Uos Contents professional pen tablet ADVANCED OPTIONS Click on the Wacom Tablet control panel OPTIONS button to access the advanced OPTIONS dialog box SIDE SWITCH MODE changes the way you use the pen when making right clicks or other click Note These settings apply to all tablets mice pens and functions Select applications Side Switch Mode e HOVER CLICK to perform click Hover Click functions without touching To do a right click or other click function hold the pen the pen tip to the tablet Ww tip close to the tablet and press the side switch surface 4i n Click amp
134. tates of America and the state of Washington This Limited Warranty is valid for and only applies to products purchased and used inside the United States and its territories or possessions and Canada WARRANTY SERVICE IN THE U S A AND CANADA To obtain Warranty service within the U S or Canada contact Wacom Customer Care Center Phone 1 360 896 9833 Email Inquiry form http www wacom com productsupport email cfm Contents Index int Uos Contents professional pen tablet WARRANTY ON SALES OUTSIDE OF THE U S A AND CANADA For products purchased or used outside of the United States and Canada the warranty period is one 1 year from the date of original retail purchase Upon discovery of a defect in the product except in the Software within the Warranty Period you should contact your local dealer or distributor In all other respects the terms of the warranty as set forth above apply to such sales Wacom Technical Support in Asia Pacific except Japan and China Detailed Asia Pacific Limited Warranty policy and product registration may be found online at http www wacom asia com To obtain technical support or Warranty service within Southeast Asia Oceania and Taiwan please contact the Wacom Customer Support Service Phone numbers can be found here http www wacom asia com support contact Should you have any questions about this Agreement or if you desire to contact Wacom for any reason please contact in writ
135. tation will use the default setting selected when the driver was installed To change the default orientation you must re install the driver from the Intuos installation CD You can also change how your tablet is oriented using the following procedure However the default orientation used at the log in screen will not be affected To set up Intuos4 for right handed operation e Open the Wacom Tablet control panel and select the MAPPING tab Choose the EXPRESSKEYS LEFT orientation option The tablet driver automatically configures all aspects of the tablet including the Wacom Tablet control panel options for correct right handed use e Next physically rotate your tablet so the tablet ExpressKeys are positioned to the left To set up Intuos4 for left handed operation e Open the Wacom Tablet control panel and select the MAPPING tab Choose the EXPRESSKEYS RIGHT orientation option The tablet driver automatically configures all aspects of the tablet including the Wacom Tablet control panel options for correct left handed use e Next physically rotate your tablet so the tablet ExpressKeys are positioned to the right Contents Index int Uos Contents professional pen tablet UNDERSTANDING THE TABLET ACTIVE AREA Your Intous4 pen and other input tools work only on the active area of the tablet Wherever you place the pen on the tablet the screen cursor pointer will appear at the corresponding point on the s
136. tch off the tablet before closing the lid on your Apple laptop closing the lid on an Apple Do not worry The tablet will automatically switch off 5 minutes after laptop computer you close the lid on your Apple laptop Alternatively if you prevent Bluetooth enabled devices from waking your computer the tablet will immediately switch off when your computer goes to sleep or when you close the lid of your Apple laptop To prevent Bluetooth enabled devices from waking your computer 1 From the Apple menu choose SYSTEM PREFERENCES 2 Click on the BLUETOOTH icon located in the HARDWARE section of the System Preferences pane 3 In the BLUETOOTH control panel click on the ADVANCED button 4 Make sure that the ALLOW BLUETOOTH DEVICES TO WAKE THIS COMPUTER option is unchecked Exit the Bluetooth control panel and quit System Preferences D Contents Index D int Uos Contents professional pen tablet You suspect the tablet Use the Wacom Tablet Utility to work with your preferences Close any preferences may be open applications Open the main APPLICATIONS folder Then open the corrupted or want to make WACOM TABLET folder and run the WACOM TABLET UTILITY certain that all settings are at their factory defaults e tis a good idea to first back up your tablet preferences In the WACOM TABLET UTILITY dialog box select CURRENT USER or ALL USERS Then click BACKUP and follow the prompts e Then de
137. tery indicates the tablet is running on external power via the USB cable or an external power adapter and the tablet battery is charging e A power plug within the status bar which resembles a battery indicates battery is fully charged and the tablet is running on external power The above points describe only the basic feedback elements of the TABLET icon You may see variations of these descriptions depending on the actual status of your tablet and operating system A Wacom icon is also displayed in the system task bar Windows or menu bar Macintosh e Hover the screen cursor over the icon to learn specific details e Click on the icon to access various options for working with your tablet For Windows the icon is located in the notification area of the task bar e For Macintosh the icon is located on the menu bar See also power saving features and changing the tablet mode options Content Ind ne m i INTUIOS cor ea CUSTOMIZING THE PEN Use the pen to open the Wacom Tablet control panel The pen will be selected in the TOOL list and the appropriate tabs will be displayed If the pen is not automatically selected choose it from TOOL list Select a tab and choose from the available options Adjusting eraser feel Customizing tilt sensitivity Tablet to screen mappin Customizing tool buttons Adjusting tip feel and double click A Ps All Other Photoshop Application specific settings
138. testing your tools Make sure you are changing the settings for the tool and application that you are using See working with multiple tools and application specific settings Be sure you are using the pen that originally came with Intuos4 or an Intuos4 accessory pen Other pens may not function properly on the tablet Be sure to press the side switch when the pen tip is within 10 mm 0 39 inch of the tablet s active area Do this without pressing down on the pen tip In the Wacom Tablet control panel verify that the side switch is set to the function you are expecting to occur for the application and tool you are using Check also the SIDE SWITCH MODE If CLICK amp TAP is selected you will need to first press the side switch while touching the pen tip to the tablet surface in order to perform a click function See customizing tool buttons A tablet status LED should brighten when you press the side switch D If not you may have defective hardware See testing your tools Index INTUOS professional pen tablet Contents The screen cursor jumps back Cannot move the cursor pointer where you want to on the screen or the line you are drawing does not line up with the location of the cursor in paint applications The computer does not go to sleep When using the tablet the screen cursor is very erratic or jumps around When using the tablet the screen cursor or pen strokes s
139. tial for product malfunction electrical shock or fire Stop using the product and contact your local distributor or the Wacom customer support center for your region Do not expose this product to water or other liquids Take care to never spill liquids onto the pen tablet or input tool s Exposing this product to water or other liquids may cause product malfunction or electrical shock If the product is exposed to water or other liquids turn tablet off by moving the power switch to the off position If your product is equipped with a power cord unplug the cord from the wall outlet When the tablet is connected using the supplied USB data cable unplug the USB connector Power down your computer Then disconnect any other cables that may remain between the pen tablet and your computer Remove the tablet battery Stop using the product and contact your local distributor or the Wacom customer support center for your region Do not insert foreign material into the USB port or any other opening of this product If a metal object or foreign material is inserted into a port or other opening of this product it may cause the product to malfunction or burn out or cause electrical shock See also safety precautions for Lithium lon batteries and cautions Contents Index int Uos Contents professional pen tablet SAFETY PRECAUTIONS FOR LITHIUM ION BATTERIES Always follow proper use and handling of the tablet battery e Do not abuse the batte
140. tion specific or icon specific menus Setting a switch function to PAN SCROLL lets you position a document or image in any direction within the active window simply by pressing the pen button and moving the pen tip across the tablet s active area As you move the pen tip the document or image is repositioned to follow the direction of pen movement on the tablet Release the pen button or lift the pen tip from the tablet surface when you are done In some application windows the document will precisely follow the screen cursor as you move the pen tip while in others it will simply move in the same general direction as the screen cursor To assign new switch functions see customizing tool buttons Contents Index int Uos Contents professional pen tablet DRAWING WITH PRESSURE SENSITIVITY The pen responds to your hand movements enabling you to create natural looking pen and brush strokes Many graphics applications have drawing tools that respond to the pressure you place on the pen For example sliders are used in some applications to vary line characteristics width color and opacity These characteristics can be controlled much better by the pen s pressure sensitivity You can vary line width blend colors and change opacity with the pressure you exert upon the pen The digital ink tools in Microsoft Windows 7 Vista and Office 2007 or later also respond to the pressure you place on the pen To draw write o
141. tive Soft Firm Click Threshold Drag the slider to adjust the Using your pen tip or eraser click threshold level ct a ad i make several strokes within the This setting determines the box to test the results of your amount of force required to changes generate a tip click High Default Cancel Content Ind ne m aM int Uos Contents professional pen tablet CUSTOMIZING TOOL BUTTONS Select the PEN tab Pen Tilt Sensitivity emails y Select the function to perform CE ae when pressing the upper or lower normal High Right Click side Sach jj Tip Feel When you bring the pen tip within a 10 mm 0 39 inch of the tablet s R ae EEE E surface without touching the tablet Soft Firm Hp Goule Click Uistance and press the upper or lower side switch the selected function Details 7 7 7 7 z occurs Current Pressure Off Large Tip To make double clicking easier set the side switch to Click Full Click P double click automatically by selecting DOUBLE CLICK Double click here to change the function assigned to the pen tip e Atleast one tool button should be set to the CLICK function e The tip must be set to CLICK in order to draw in most graphics applications Note You can change how the side switch operates for right clicks or other click functions See advanced options for details Content Ind E fi le D 40 int Uos Contents professional pen tablet
142. tivity making it the most natural freehand tool Includes the following accessories Pen stand standard nib qty 1 stroke nib qty 1 hard felt nib qty 1 and flex nib qty 1 Intuos4 Mouse KC 100 Cordless and battery free the five button mouse is an ideal tool for performing any task you may have done previously with a standard mouse It includes an integrated middle button and rolling fingerwheel that can be used for up and down scrolling or the button can be programmed for a variety of other actions Intuos4 Airbrush KP 400E 01 A true digital airbrush the pressure sensitive Intuos4 Airbrush incorporates a pressure sensitive tip and eraser tilt sensitivity and a fingerwheel that provides an additional degree of control over the application of digital paint Includes the following accessories Pen stand standard nib qty 1 stroke nib qty 1 hard felt nib aty 1 and flex nib qty 1 Intuos4 Inking Pen KP 130 01 This pressure and tilt sensitive drawing pen was created to provide immediate feedback at your pen tip on the drawing as well as on your computer screen The pressure sensitive Inking Pen comes with inking cartridges and two polyacetal tips for inkless drawing It has a pressure sensitive tip but no eraser and no side switches Includes the following accessories Pen stand standard nibs qty 2 inking nibs qty 3 Note When you purchase an Inking Pen it comes with a polyacetal nib in the pen Use the nib ex
143. tomizing 43 connection problems 70 ExpressKeys general problems 72 customizing 44 Macintosh specific problems Tf testing 68 tables 70 using 31 Windows specific problems 76 features 8 Uninstalling software 85 installation 81 USB connection 18 mode options changing 86 Using orientation 48 Airbrush 90 physical configuration 20 applications integrated for tablet control 88 power saving features 13 Art Pen 90 preferences managing 85 ExpressKeys 31 properties working with 36 mouse 89 replacing battery 83 pen 23 storing 83 Radial Menu 57 testing 64 Touch Ring 32 Touch Ring Wacom international offices 116 customizing 45 Warnings 101 testing 68 Warnings battery 102 using 32 Windows specific problems troubleshooting 76 wireless connection light 14 Wireless connection 15 working with 30 establishing 16 Tablet to screen mapping customizing 46 Wireless connection light 14 Technical Suppor contacting 79 Work area setting up 19 Testing Working with Intuos4 23 ExpressKeys 68 mouse 69 Contents Index a le lt D 115 Contents INTUOS professional pen tablet WACOM INTERNATIONAL OFFICES WACOM TECHNOLOGY CORPORATION 1311 SE Cardinal Court Vancouver WA 98683 U S A Telephone 1 360 896 9833 Fax 1 360 896 9724 WACOM CO LTD JAPAN MARKETING AND SALES DIVISION Harmony Tower 21F 1 32 2 Hon Cho Nakano Ku Tokyo 164 0012 Japan Internet http tablet wacom co jp WACOM CHINA CORPORATION Unit 2807 28th Floor SK Tow
144. ton e To restore preferences that you had previously backed up select CURRENT USER or ALL USERS Then click on the RESTORE button Be sure to carefully follow any prompts that may appear Contents Index a le lt D 85 Int Uos Contents professional pen tablet CHANGING THE TABLET MODE OPTIONS Within the control panel s TABLET list double click on the tablet icon to display the TABLET dialog box The TABLET mode settings apply to all tools and applications If desired enter a new name to be used for the tablet icon Name Intuos4 WL STANDARD MODE is recommended for graphics Tablet Mode Standard Mode applications and is the default condition Choose RECOGNITION MODE for the maximum data rate Required by some handwriting recognition software Supported only on Bluetooth Specification v2 0 or later connections that support a the EDR Enhanced Data Rate protocol Default Cancel E INSTALLING MULTIPLE TABLETS The TABLET list displays an icon for any supported tablet that has been detected on your system and allows you to select the tablet for which your changes will apply Select a tablet icon for which to customize tool and application settings e The control panel will not launch unless a supported tablet is Tool connected to the computer PREZ 3 e Settings can only be viewed or Application lt A E changed for an attached tablet All Other Photoshop To add a new tablet connec
145. tractor silver ring to gently remove the polyacetal nib from the pen Then insert one of the silver colored cartridges that come with the Inking Pen The cartridge tip has a waxy coating that you will need to rub off before you can begin inking Intuos4 Art Pen KP 701E 01 This specialty pen provides 360 degrees of barrel rotation and like the Intuos4 Grip Pen is pressure and tilt sensitive Combining these features with a unique chisel shaped nib makes the Intuos4 Art Pen the most realistic tool for emulating brushes markers and calligraphic pens Includes the following accessories Pen stand chisel tipped nibs qty 2 chisel tipped felt nibs qty 2 bullet tipped nibs qty 3 and bullet tipped felt nibs qty 3 Intuos4 Classic Pen KP 300E 01 This pen has the same feature set as the Intuos4 Grip Pen but with a slimmer profile that does not include a rubberized grip Includes the following accessories Pen stand standard nib qty 1 stroke nib qty 1 hard felt nib qty 1 and flex nib qty 1 D Content Ind ne w Aa ICUS om a EKET DESCRIPTION PART NUMBER Replacement nibs for Grip Pen Airbrush or Classic Pen Standard nib firm plastic nib black qty 5 ACK 20001 Stroke nib spring loaded nib more of a brush like feel qty 5 ACK 20002 Felt nib softer nib for a pencil or marker on paper feel qty 5 ACK 20003 Flex nib a flexible elastomeric nib that provides a higher ACK 20004
146. upport to be sure it is working correctly Be sure that your Bluetooth configuration supports Bluetooth and the HID profile Make another attempt to pair the tablet to your system See establishing a Bluetooth connection Check the Grip Pen Move your pen across the tablet active area the screen cursor should move in the corresponding direction on your monitor or display screen Press the pen tip against the surface of the tablet A status LED should brighten Next without applying pressure to the pen tip hold the pen tip within approximately 10 mm 0 39 inch of the tablet surface and press the side switch The LED should again brighten Turn the pen over and press the eraser against the surface of the tablet the LED should brighten See testing your tools for detailed information Check the Touch Ring See testing your tools Check the ExpressKeys See testing your tools Check any other tool s such as the optional Intuos4 Mouse See testing your tools If these tests fail you may have a defective input tool or tablet See technical support options After testing use the Wacom Tablet control panel to reconfigure your tablet and tools for any custom settings you may originally have been using Contents Index a le lt D 65 int Uos Contents professional pen tablet TESTING YOUR TOOLS If an input tool does not work as you expect first open the Wacom Tablet control panel and check the assigned functions or re
147. use buttons fingerwheel pen Radial Menu tablet ExpressKeys Touch Ring tablet to screen mapping tilt sensitivity tip feel advanced tool buttons Touch Ring Diagnostics Display Toggle working with Double click customizing Double clicking how to Dragging with pen Drawing with pressure sensitivity with tilt Driver downloads obtaining Environmental conditions Eraser feel advanced customizing 34 35 33 35 38 39 39 44 41 42 42 37 57 43 44 45 46 41 38 39 40 45 66 58 38 26 26 28 28 80 83 39 39 int Uos Contents professional pen tablet Erasing 29 Ordering parts and accessories 96 Ergonomics 19 Orientation tablet 48 ExpressKeys physical configuration 20 customizing 44 Parts and accessories display optimization 88 available 97 testing 68 ordering 96 using 31 Pen Eye hand coordination exercise 29 clicking with 26 FCC notice 99 customizing 37 Features double clicking with 26 control panel 34 dragging with 26 pen 10 drawing power saving 13 with pressure sensitivity 28 tablet 8 with tilt 28 Fingerwheel mouse using 89 erasing with 29 Force proportions 50 features 10 Functions button 51 holding 24 General problems troubleshooting 72 pointing with 25 Holding positioning with 25 Airbrush 90 replacing the tip 84 pen 24 side switch 27 Industry Canada notice 100 testing 67 Information product 96 tip replacing 84 Installing using 23 multiple tablets 86 Pen Mode 46 tablet 81 Pointing
148. use buttons can be customized The default button options are Front and rear buttons These are set for FORWARD and Left Click BACK functionality within your Right RIGHT CLICK Internet browser Middle MIDDLE CLICK Front FORWARD Rear BACK Important When the Intuos4 Mouse is not in use place it on your desk Leaving an Intuos4 tool on the tablet may interfere with screen cursor positioning when using other pointing devices or may prevent your computer from going to sleep See also customizing the mouse Content Ind ee a INEUOS oenen TEEF USING THE OPTIONAL AIRBRUSH AND ART PEN The optional Intuos4 Airbrush works like the Grip Pen but also includes a fingerwheel for an additional degree of control With proper software support you can simulate realistic airbrushing For example tilting the Airbrush can cause the spray pattern to elongate and feather out Rolling the fingerwheel adjusts the spray intensity and pressure on the tip controls the brush size Hold the Airbrush with your thumb and middle finger The fingerwheel should be in a convenient location for you to roll it with your index finger Tilt the Airbrush to find a comfortable position that allows you to paint and draw with pressure sensitivity Eraser Side switch Y The default settings are Windows RIGHT CLICK Macintosh DOUBLE CLICK Fingerwheel Roll the fingerwheel backwards to increase ink flow or brush size and forward to reduce it
149. ven and the product is sent within the warranty period WACOM is not obligated to repair or replace the product if a the damage to the product results from any accident misuse improper use negligence or unauthorised alteration or repair b the product was not handled or stored according to the instructions provided by WACOM c the damage resulted from normal wear and tear or d the serial number affixed by WACOM has been removed or rendered unintelligible If when a claim made under this warranty is checked it emerges that it is outside the permitted time period or is not covered by the warranty or that the product is not faulty the costs of any checks or repairs must be borne by the customer D Contents Index int Uos Contents professional pen tablet Any descriptions drawings specifications samples models notifications or similar material provided in connection with the purchase of the product cannot be taken as an explicit guarantee that the product corresponds to or fulfils the customer s requirements If this product is faulty the purchaser shall be entitled to assert legal claims against the vendor for liability due to defects These legal rights against the vendor are not limited by the existing warranty The warranty grants the customer many additional rights under the conditions stipulated in this text This limited warranty shall apply if the registered office of the vendor is in the EU or in Iceland
150. work with the pen tip The tablet driver software was not installed or did not load properly e Make sure the tablet driver software is installed and functioning e Insert the Intuos installation CD into your computer and install the driver software for the tablet Some applications require that you turn on the pressure capabilities within the application or the selected tool before the pen will respond aS a pressure sensitive tool Some applications do not support pressure If you are unsure whether pressure is supported see the documentation that came with your application s Try using a lighter TIP FEEL See adjusting tip feel and double click e Use the side switch to double click Review the technique in clicking e Be sure you are quickly tapping the tablet twice in the same place on the tablet s active area e Try increasing the TIP DOUBLE CLICK DISTANCE See adjusting tip feel and double click e Try using a lighter TIP FEEL See adjusting tip feel and double click e Set an ExpressKey to DOUBLE CLICK and use it to issue double clicks e Windows Try setting your system to launch programs with a single click See clicking Open the Wacom Tablet control panel and go to the PEN tab Move the TIP FEEL slider toward FIRM or select DETAILS and increase the CLICK THRESHOLD setting If this does not help see testing your tools The pen nib may be worn See replacing the pen tip Open the Wacom Tablet control pan
151. xtended storage a month or longer Wacom recommends that the battery be at least half full before you move the power switch to the off position You do not need to remove the battery because the power switch disconnects the battery from the tablet circuit when in the off position e If your battery can no longer be charged or no longer holds a charge the battery should be replaced See replacing the tablet battery A Warning See the safety precautions for Lithium lon batteries Contents Index int Uos Contents professional pen tablet POWER SAVING FEATURES Intuos4 uses a number of power saving features designed to conserve the tablet battery charge and improve performance e Auto power save mode Automatically reduces power to the Touch Ring status LEDs and ExpressKeys display as follows 1 minute no user input Low LED and ExpressKeys display brightness 2 5 minutes no user input ExpressKeys display turns off Low LED brightness Active user input Returns brightness to set level e Auto sleep mode To conserve battery power when the tablet is not in use the tablet will automatically enter sleep mode after 30 minutes without user input To resume operations press the Touch Ring toggle button or move the power switch off and back on When there is no wireless connection for more than 5 seconds such as when the computer is switched off or the tablet is moved out of range Intuos4 also switches to sleep mode To resume ope

Intuos4 User`s Manual for Windows & Macintosh

Contents

Download Pdf Manuals

Related Search

Related Contents

Intuos4 User`s Manual for Windows &amp; Macintosh

Contents

Download Pdf Manuals

Related Search

Related Contents

Intuos4 User`s Manual for Windows & Macintosh