Wireless Table Radio - PDi Communication Systems
Contents
1. 2 Press and hold down the Scan button on the back of the radio until the front frequency display be gins to scan The Memory indicator will index as the radio discovers active stations and reads them FM into memory Q 3 J MHz 3 Advance through the stored memory channels us ing the Tuning knob and check for stored stations 1 15 M01 Note If the radio does not discover expected sta tions try to reorient the antenna for better recep tion and Scan again Memory Indicator 4 Alternately press the Scan button until the Memory Indicator disappears and tune the radio manually PDI TR100 Table Radio User Manual Document PD196 191R2 doc Programming continued Wireless Pairing to a Television PDI Television models that offer wireless capability can be linked to the table radio Both remote control of the TV and TV sound are available through the table radio Verify the PDI television model offers wireless connectivity by turning the TV On and then press and hold down the TV AV button on the TV for 6 seconds a Wireless Audio menu will appear on compatible models 1 Use a PDI programming remote control F and enter the TV s Setup menu and select A Power On Caption Mode Last Features Inactive Power Off h mm Disabled Bed A B A 2 Inthe Features menu set Standby Power Caption Text Modes Digable Digital Captions gt to Normal Digital Mode Time Setup gt2. Communication a Systems Inc Wireless Table Radio AM and FM Radio plus Wireless TV Control PO 12 00 MODEL PDI TR100 PDI TR100 Table Radio A AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT RE MOVE COVER OR BACK THERE ARE NO USER SERVICE ABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE FCC INFORMATION This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interfer ence to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation bet
3. or cable system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code ANSI NFPA 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure A NEC NATIONAL ELECTRICAL CODE a sa ANTENNA __ _ LEAD IN WIRE GROUND ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H FIG A NOTE This reminder is provided to call the CATV system installer s attention to article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the build ing as close to the point of cable entry as practical 16 WARNING To Reduce The Risk Of Fire Or Electrical Shock Do Not Expose This Apparatus to Rain or Moisture The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the ap paratus PDI TR100 Table Radio User Manual Document PD196 19
4. Position A V Exit SETUP 9 Inthe Wireless Device Listing menu select Wireless Device Listing the appropriate table radio device recently Found the following nearby devices located keeping in mind that more than one 1R100 01 2AAA52 C80NO8 ae TR100 02 944452C80F09 device may appear NOTE Listing of wireless devices may differ from those illustrated Position AW Exit SETUP Next lt gt Wireless Device Passkey 10 Enter the Passkey code 0 0 0 0 for the table a Passkey 0 0 0 0 radio Press the next arrow Volume Up but ton to continue Exit TV AV Next lt gt 10 PDI TR100 Table Radio User Manual Document PD196 191R2 doc Programming continued Wireless Pairing to a Television continued 11 A success message will appear when the radio is paired with the TV Press Volume Wireless Device Paired Successfully Press P tocontinue up to continue 12 Check for TV sound from the radio 13 Adjust the Tuning knob on the radio The TV displays Channel Numbers as the knob is rotated Select the desired Channel The TV should then change to the displayed channel 14 Turn the Mode knob to Standby AM or FM The TV should turn Off for all modes except when set to TV Turn the Knob to TV the TV should turn On Wireless Audio Clearing a Wireless Paired Device ea a Wireless Audio Status Wireless PDi A device that is linked to the radio can be dis Pair Wireles
5. Watt Operating Temperature For moderate climates Storage Temperature 4 F to 113 F Dimensions 4 7H x 5 5D x 7 1W Inch Weight 2 75 lbs Specifications are believed accurate but are not warranted and are subject to change without notice or obligation 14 PDI TR100 Table Radio User Manual Document PD196 191R2 doc PDI Limited Warranty PDI Communication Systems PDI warrants this product except as set forth below ONLY TO THE ORIGINAL PURCHASER to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original purchase fora period of2 years for parts and 2 years for labor The Warranty Period THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 50 UNITED STATES THE DISTRICT OF COLUMBIA AND CANADA If this product is found to be defective PDI will repair or replace defective parts at no charge to the original owner during the warranty period Such repair and replacement services shall be rendered by PDI or a PDI Authorized Servicer during normal business hours Parts used for replacement or repair are warranted only for the remainder of the Warranty Period To return a product for service please obtain a Return Material Authorization RMA from PDI Products returned without a RMA will not be serviced WHAT IS NOT COVERED This limited warranty provided by PDI does NOT cover 1 Product which has been subject to abuse accident alteration modification tampering negligence misuse faulty installation la
6. 1R2 doc Package Contents Carefully unpack your Table Radio and verify that the following items are included lita N FM Antenna oome 4 aio eo able Ra am ae s contr N AAA Batteries TR gi PL wo a E User Manual AM Antenna Installing Location The PDI TR100 table radio is designed to provide both AM FM radio reception and also wire less Pairing Digital Interface control of PDI wall mounted hospital televisions Please keep these guidelines in mind when selecting a location e Place the radio on a flat surface e Do not use the radio in a damp location e Locate the table radio in the same room as the TV if wireless connectivity is desired e A location near the patient s bed or chair side is preferred for easy operation c A iireless gt D gt p gt Pairing Digital Interface Note PDI wall mounted television model must offer wireless connectivity to function Installing continued PDI TR100 Table Radio User Manual Document PD196 191R2 doc Battery Installation Two AAA batteries are provided to keep the table radio s clock running and backup the internal memory should power be inter rupted The batteries do not power the table radio or light the display AYALIWE 49019 1 Locate the CLOCK BATTERY cover on the back of the table radio 2 Press the tab on the cover and remove 3 In
7. Diagnostics gt Channel Up Power Off Disabled 3 Inthe Features menu also set Wireless Channel to other soaks Enabled Audio to Enabled Power on ARC Mode Last a Standby Power Normal Wireless Audio Enabled 4 On the TV press and hold down the TV AV button for 6 seconds until the Wireless Audio menu appears 5 Inthe Wireless Audio menu setthe waew Wireless Audio Status item to Wireless Position AV Exit SETUP Next lt gt PDi Wireless Audio Status Wireless PDi a Pair Wireless Audio a Clear Wireless Audio Device gt Position AV 6 Now set the Radio to TV mode Exit SETUP Next lt gt 7 Press and hold down the Pair HEADPHONES gt button on the back of the O O O radio for 5 seconds until the word PAIR appears on the radio s display XAYMALLVE MOOTO The radio will remain in Pairing Mode for 180 seconds If necessary re enable C ro O Oo O Pairing Mode by depressing the Pair Fo Z G Mey button for 5 seconds a S Pair Button PDI TR100 Table Radio User Manual Document PD196 191R2 doc Programming continued Wireless Pairing to a Television continued 8 Inthe Wireless Audio menu select Pair Wire less Audio The TV will now search for avail able nearby wireless devices a Wireless Audio Status Wireless PDi Pair Wireless Audio gt Clear Wireless Audio Device gt
8. V button for 6 seconds a Wireless Audio menu will appear on compatible models Verify the Table Radio is within 30 feet of the TV Verify the external AM Antenna is connected Re scan for channels If the radio does not discover expected stations try to reorient the antenna for better reception and Scan again Move the radio farther away form sources of interference such as fluorescent lights or other electronic equipment which generate electrical noise The radio s location may be in an area of weak AM signal coverage Verify the external FM Wire Antenna is connected Re scan for channels If the radio does not discover expected stations try to reorient the antenna for better reception and Scan again The radio s location may be in an area of weak FM signal coverage For additional help in resolving problems contact PDI Customer Service PDI Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 PH 800 628 9870 FX 937 743 5664 13 PDI TR100 Table Radio User Manual Document PD196 191R2 doc SPECIFICATIONS MODEL PDI TR100 FM AM Tuner Yes FM Frequency Range 87 5 108 Mhz AM Frequency Range 530 1700 Khz Wireless Audio Output Yes Backlit Display Yes TV Channel Selection Yes with compatible TV Models Only Alarm Clock Yes Speaker Size 3 inch Full Range Power Adaptor Rating 15 Vdc 1 6 A Input 15 Vdc 1 6 A Power Maximum 8 Watts Power Standby less than 1
9. a soft damp cloth to clean Do not use harsh chemicals such as solvents Wipe off water droplets from the cabinet as soon as possible as they may leave spots DISCLAIMER The author and publisher have used their best efforts in preparing these instruc tions PDI Communication Systems Inc make no representation or warranties with respect to the accuracy or completeness of the contents of this guide and specifically disclaim any implied warranties or merchantability or fitness for any particular purpose and shall in no event be liable for any loss of profit or any other damages The information contained herein is believed accurate but is not war ranted and is subject to change without notice or obligation COPYRIGHT PDI communication Systems Inc claims proprietary right to the material dis closed in these instructions and issues them for user information only and may not be used to manufacture anything shown herein Copyright 2011 by PDI Com munication System Inc PDI TR100 Table Radio User Manual Document PD196 191R2 doc IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or
10. ck of reasonable care or if affixed to any attachment not specified for the product Product that has either the model number or serial number altered tampered with defaced or removed Initial installation and removal for repair Operational adjustments covered in the Owner s Manual normal maintenance and cleaning Damage that occurs in shipment due to act of God and cosmetic damage Signal reception problems and failures due to line power surge The cost for shipping the product to PDI s service center Accessories Batteries None ON Gh Ge BS There are no expressed warranties except as listed above THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO THE DURATION OF THE EXPRESSED WARRANTY HEREIN PDI SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT INCONVENIENCE LOSS OR ANY OTHER DAMAGES WHETHER DIRECT INCIDENTAL OR CONSEQUENTIAL RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY ALL EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts so these limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from
11. io User Manual Document PD196 191R2 doc Programming continued Setting the Clock The clock is set using the CLOCK SET button and the Tuning knob Push in on the Tuning knob to advance through the clock settings HEADPHONES oS Q 1 Place the radio in STANDBY mode 2 Press and hold down the CLOCK SET button on the back of the radio until the Time Display Hours begins to blink Release the button AYALLVE Y90770 IAI AZ Salk Va ANrenwa PAIR CLOCK SET SCAN Deiva o OO OIG ANTENNA 3 Turn the Tuning knob clockwise or counter clock Cy or wise to set the current hour KO Q ie ay CLOCK SET Button 4 Push in and release the Tuning knob until the minute display begins to blink 5 Turn the Tuning knob clockwise or counter clockwise to set the current minutes 6 Push in and release the Tuning knob turn it clockwise or counter clockwise to select 12 or 24 hour display format 7 Push in and release the Tuning knob to exit Searching for Radio Stations ke ron O ON AM or FM radio stations can be manually tuned or scanned and stored into the radios channel memory The radios channel memory is then tuned during normal listening AdaLLVd 490709 1 Turn the radio to the desired mode either FM or P N ien par CLOSET somn pouroa 7N o 00 O80 C AM o O iO lt J C lt CCY
12. mportant operating and maintenance servicing instructions in the literature accompanying the unit Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation If the product has been dropped or damaged in any way When the product exhibits a distinct change in performance which indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in safe operating conditions CLEANING amp DISINFECTING Unplug the radio before cleaning Use
13. ng knob until the minute display begins to blink 9 Turn the Tuning knob clockwise or counter clockwise to set the current minutes 10 Push in on the Tuning knob to exit 11 Turn either the Volume or Tuning knob to silence the Alarm Bass and Treble Adjustment 1 Place the radio in AM or FM mode BASS 0 2 Push the Tuning Knob in for 3 seconds until the display changes to BASS TREBLE TREBLE 1 3 Turn the Tuning Knob clockwise or counter clockwise to set the Bass level 3 3 4 Push the Tuning Knob in to advance the selection to Treble 5 Turn the Tuning Knob clockwise or counter clockwise to set the Treble level 3 3 6 Push in on the Tuning knob to exit PDI TR100 Table Radio Troubleshooting User Manual Document PD196 191R2 doc SYMPTOM RESOLUTION Radio does not function No Sound Table radio does not link or control TV AM radio reception is weak FM radio reception is weak Customer Service Make certain the Power Adapter wired connector is in serted securely into the radio Verify the Power Adapter is plugged fully into a powered AC wall outlet Increase the Volume Push in and release the Volume button and verify the radio sound is not muted Disconnect Headphones if connected and recheck for sound Verify that the TV is a PDI brand with wireless option Verify the PDI television model offers wireless connec tivity by turning the TV On and then press and hold down the TV A
14. nto an AC wall outlet Headphone Connection fe TIE N For private listening the radio comes equipped with a l rear mounted Headphone Jack XYALLVE Y90710 1 Connect the headphones not supplied to the Headphone Jack The Radios internal speakers will be muted Radio sound should now play through Ot the connected headphones SS 2 Disconnect the headphones to restore sound to the Radios internal speakers PDI TR100 Table Radio User Manual Document PD196 191R2 doc Programming Controls Three knobs control the functions of Volume Mode and Tuning 1 VOLUME Adjust volume Push in and release to Mute sound Push in again and release or rotate knob to un Mute 2 MODE Place the radio in STANDBY TV FM or AM mode 3 TUNING Tune AM FM and TV channels In TV mode Push in and release for Closed Captions DISPLAY The front display provides a considerable amount of information A MODE Display active TV FM or AM mode B ALARM Icon visible when Alarm is enabled C LINK Icon visible when radio is linked to a TV D VOLUME Volume level 0 30 E BATTERY Replace batteries when icon is visible E MEMORY Active memory channel 0 20 G TIME FREQUENCY Displays current AM FM frequency or time PDI TR100 Table Rad
15. other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A ground ing type plug has two blades and a third grounding prong The wide blade or the third prong are pro vided for your safety If the provided plug does not fit into your outlet consult an electrician for replace ment of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience recep tacles and the point where they exit from the appara tus 11 Only use attachments accessories specified by the manufacturer 12 User only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 If an outside antenna or cable system is connected to this apparatus be sure the antenna NWO SPW ND e ry
16. s Audio gt connected To disconnect the TV from the radio Clear Wireless Audio Device gt use the following procedure 1 Turn the radio to TV mode 2 On the TV press and hold down the TV Position AW AV button for 6 seconds until the Wireless Exit SETUP Nero Audio menu appears 3 Inthe Wireless Audio menu highlight Clear j j i Wireless Device Cleari Wireless Audio Device Press Volume up to select Are you sure you would like to disconnect and unpair wireless device 4 A confirmation screen will appear Select No Yes to disconnect the device 5 Verify the radio is no longer linked to the TV Exit TV AV Next lt gt 11 PDI TR100 Table Radio User Manual Document PD196 191R2 doc Additional Settings 12 Display Brightness Adjustment 1 Place the radio in STANDBY mode 2 Push the Tuning Knob in for 3 seconds until the D IMME R HI display changes to DIMMER ALARM ALARM OFF 3 Turn the Tuning Knob clockwise or counter clockwise to set the display brightness to either HI high MI medium or LO low 4 Push the Tuning knob in to advance the selection to ALARM 5 Turn the Tuning knob clockwise or counter clockwise to turn the ALARM On or Off Setting the Alarm 6 To set the Alarm Time turn the ALARM On and then press the Tuning Knob once to display the Alarm s time 7 Turn the Tuning knob clockwise or counter clockwise to set the current hour 8 Push in on the Tuni
17. sert each of the AAA batteries provided into the bat tery compartment making certain to match the battery and polarities as shown 4 Reinstall the CLOCK BATTERY cover making certain the tab snaps in place to secure the cover WARNING Do not expose the batteries to l excessive heat such as sunshine fire or the like Antenna Installation 2 2 The table radio relies upon 2 externally connected anten he D O O ON J WY nas for signal D FM ANTENNA 1 Connect the supplied FM antenna to the FM Antenna p e jack on the back of the radio F Se OOS a N Gg 2 ee 2 Alternatively an FM signal available on a CATV O Q O O system cable can be connected Contact your cable provider for assistance AM ANTENNA 1 Connect the supplied AM antenna to the AM Antenna jack on the back of the radio ZF FM Antenna AM Antenna PDI TR100 Table Radio User Manual Document PD196 191R2 doc Installing continued Anti Theft Lock J RaRS 7 A laptop cable lock not supplied can be attached to the O 0 O back of the radio to deter theft CA LY AdaLIVa 49010 a A ER N Power Adapter Installation The radio is powered from an external power adapter 1 Connect the Power Adapter plug into the DC power jack on the back cabinet 2 Connect the body of the Power Adapter i
18. state to state Refurbished products carry a separate warranty This warranty does not apply For details of refurbished product warranty please refer to the refurbished product warranty information packaged with each refurbished product PDI Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 PH 800 628 9870 FX 937 743 5664 15 Ee Communication I Systems Inc r La 40 Greenwood Lane Springboro Ohio 45066 USA MODEL PDI TR100 User Manual Document Number PD196 191R2 doc
19. ween the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced Radio TV technician for help This equipment complies with Part 15 of the FCC Rules Opera tion is subject to the following conditions e This equipment may not cause harmful interference e This equipment must accept any interference received in cluding interference that may cause undesired operation MODIFICATIONS Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment SERVICING User Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel User Manual Document PD196 191R2 doc Thelightning flash with arrow headsymbol withinan equilateral triangleisintendedtoalertthe user to the presence ofuninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of i
Download Pdf Manuals
Related Search