Wanda EP Primer Fast - iss coaching lucknow uttar pradesh lucknow
Contents
1. Description Mixing ratio Equipment Application Flash off Clearcoat Application Protection Technical Data Sheet Wanda Waterbase Plus MM D1 04 06 MAR 2015 Wanda Basecoat WB Plus MM is designed to produce solid pearl and metallic colors It has excellent drying properties and can be used for small repairs and total resprays 100 Wanda Basecoat WB Plus MM 5 10 Wanda WB Plus Activator 10 20 for Metallic Colors Spray gun set up Application pressure 1 2 1 3 mm 1 7 2 2 bar at the air inlet Please refer to spray gun user manual 2x 1coat Recommended to apply 1 Full coat 1 Medium coat and 1 drop coat for better metallic orientation for metallic shades Between coats Before clearcoat Until matt 15 minutes at 20 C Overcoat with Wanda Clear 9000 See clearcoat T D S D1 05 19 Use suitable respiratory protection AkzoNobel Car Refinishes recommends the use of afresh air supply respirator Akzo Nobel Car Refinishes Australia Pty Ltd Address 269 Williamstown Road Port Melbourne VIC 3207 Tel 61 03 9644 1711 AkzoNobel Technical Data Sheet Wanda Waterbase Plus MM D1 04 06 MAR 2015 Description Wanda Basecoat WB Plus MM is designed to produce solid pearl and metallic colors It has excellent drying properties and can be used for small repairs and total resprays Product and Wanda Basecoat WB Plus MM Additives Wanda Activator WB Plus Wanda WB Plus Additive Long Pot Life2. Basic Raw Basecoat Physical drying binder Materials Suitable Sound original finishes and old painted surfaces Substrates Wanda 2K Multi primer WOW Sanding Wanda Multi Plastic Primer Mixing 5 20 Wanda WB plus MM Note Addition of Activator WB Plus 20 is possible for adjusting the viscosity of light metallics and for correction in case of dry conditions Mixed colors must be stirred thoroughly after mixing For optimum straining use WB Plus suitable paint strainers size 125 um Viscosity 20 30 seconds DC4 at 20 C Akzo Nobel Car Refinishes Australia Pty Ltd Address 269 Williamstown Road Port Melbourne VIC 3207 Tel 61 03 9644 1711 AkzoNobel Technical Data Sheet Wanda Waterbase Plus MM D1 04 06 MAR 2015 Spray Gun Gravity feed 1 2 1 3 mm 1 7 2 2 bar at the spray gun air inlet Set up and Application HVLP max 0 6 0 7 bar at the air cap Pressure Please refer to spray gun user manual Application Metallic and Pearl Colors Apply one single coat Allow flash off until the coat is completely dried mat Apply a following lighter coat repeat till covering is achieved If necessary finish with a mist coat layer by reducing the working pressure with 0 5 to 1 bar at the air inlet and increase the distance between spray gun and object Solid Colors Apply one full single coat Allow flash off until the coat is completely matt Apply another single coat and again allow this coat to flash
3. 160 W1322 W1565 W1653 W1801 W1802 W1804 W1805 W1806 W1841 W1459 W1803 48 months at 20 C W1459 W1900 7 W1943 W1969 W 1942 W1953 W1901 W1914 W1923 W1982 W1933 W1954 W1955 W1956 W1957 W1966 W1977 W1927 6 months at 20 C W1432 VOC 2004 42 Ilb D 420 386 The EU limit value for this product product category Illb D in ready to use form is max 420 g L VOC The VOC content of this product in ready to use form is max 386 g L AkzoNobel Car Refinish bv Address Rijksstraatweg 31 PO Box 3 2170 BA Sassenheim Tel 31 0 71308 6944 FOR PROFESSIONAL USE ONLY IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our Knowledge and on current laws any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation Always read the Material Data Sheet and the Technical Data Sheet for this product if available All advice we give or any statement made about the product by us whether in this data sheet or otherwise is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors a
4. er a minimum drying time of 15 minutes but within 24 hours Working time can be reduced by acceleration of the air soeed by using dry jets Pot life Solid and pearl colors 3 months at 20 C Metallic colors which do not contain tinter 7001 1 week at 20 C Metallic colors which do contain tinter 7001 1 day at 20 C Note Adding Additive Long Potlife increases pot life of metallics to 3 months Film Per coat 10 20 um Thickness Recommended application 2 coats 20 30 um Theoretical Ready for use mixture at recommended layer thickness per coat 7 5 m L Coverage The practical coverage depends on many factors i e shape of the object roughness of the surface application method and application circumstances Cleaning of Use WB Plus Gun Cleaner Equipment Product Product shelf life is determined when products are stored unopened at 20 C Storage Avoid extreme temperature fluctuation Shelf life 12 months at 20 C W1101 W1144 W1727 W7236 W1451 W1236 18 months at 20 C W1002 W1676 W1102 W1234 W1434 W1452 24 months at 20 C W1000 W1001 W1100 W1221 W1725 W1435 W1622 W1651 W1766 W1233 W1235 W1239 W1346 W1436 W1903 W1545 W1903 W1920 W1924 W1947 W1968 W1723 Akzo Nobel Car Refinishes Australia Pty Ltd Address 269 Williamstown Road Port Melbourne VIC 3207 Tel 61 03 9644 1711 AkzoNobel Technical Data Sheet Wanda Waterbase Plus MM D1 04 06 MAR 2015 36 months at 20 C W1145 W1
5. ffecting the use and application of the product Therefore unless we specifically agree in writing otherwise we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product All products supplied and technical advices given are subject to our standard terms and conditions of sale You should request a copy of this document and review it carefully The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development It is the user s responsibility to verify that this data sheet is current prior to using the product Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel Head Office AkzoNobel Car Refinishes B V PO Box 3 2170 BA Sassenheim The Netherlands Akzo Nobel Car Refinishes Australia Pty Ltd Address 269 Williamstown Road Port Melbourne VIC 3207 Tel 61 03 9644 1711 AkzoNobel
6. off until matt repeat until covering is achieved a mist coat is not needed with solid colors Spot and Fade Out Repair Apply the basecoat in thin overlapping coats with the spray gun fully triggered at a spraying pressure of 1 5 2 bar until opacity is achieved Allow to flash off until matt between coats than fade out twice into remaining area only metallic colors again using a spraying pressure of 1 5 2 bar Notes e While making a spot repair it s not necessary to tag rag between coats e Apply a full coat of pure W1000 as a first coat for a better orientation of the metallic e With metallic 50 of pure W1000 can be added to the final drop coat e Do not apply to heavy coats while making a spot repair e Addition of Activator WB plus 5 20 is possible for o adjusting the viscosity of light metallics o avoiding overspray while painting larger objects o painting in warm and or dry conditions low RH Akzo Nobel Car Refinishes Australia Pty Ltd Address 269 Williamstown Road Port Melbourne VIC 3207 Tel 61 03 9644 1711 AkzoNobel Technical Data Sheet Wanda Waterbase Plus MM D1 04 06 MAR 2015 Mixed colors must be stirred thoroughly directly after mixing prior adding Activator e lf apure Basecoat WB Plus metallic mixing color will be applied always add Basecoat WB Plus tinter W1000 in a mixing ratio 1 4 e Clean spray gun with WB Plus Guncleaner directly after use Wanda Clear 9000 can be applied aft
Download Pdf Manuals
Related Search