instruction manual l
Contents
1. 5 minutes Re install backup batteries and reconnect to AC power Trouble pairing device computer with iBN43 Bluetooth implementation varies depending on your device s hardware and operating system Please see our website for updates on pairing e When you power ON the unit it will automatically link with the last previously paired Bluetooth device if the device is still within range about 30 feet To pair with a different device you must turn off Bluetooth capability on the already paired device or take it out of range e Make sure your device is working properly Check your device s manual for details on Bluetooth pairing and linking For further information and to see the latest instructions visit www ihome com support Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement 2 Ventilation The unit should be situated so that its location or position2. 5 seconds You can adjust the duration of the gradual volume increase from 15 30 45 60 90 or 120 seconds or to OFF Setting the duration to OFF will turn off Gentle Wake the alarm will sound at the set alarm volume without a gradual volume increase 1 To set the Gentle Wake duration press and hold the Wakeup Alarm Skip Button for 2 seconds until the Gentle Wake duration time flashes on the display 2 Press the or Button to adjust the Gentle Wake time from 15 seconds up to 120 seconds or off 3 Press and release the Wakeup Alarm Skip Button 2 beeps will confirm Gentle Wake duration setting NOTE The Gentle Wake duration does not affect the overall alarm cycle which lasts for 1 hour 8 Using the iBN43 Snooze Dimmer Button 1 To program Snooze press and hold the Snooze Dimmer Button during normal operation when no alarm is sounding 2 Press the or Buttons to select the desired snooze time between 1 and 29 minutes Press and release the Snooze Dimmer Button to confirm Snooze setting Kw While the alarm is sounding press and release the Snooze Dimmer Button to temporarily silence the alarm for the set duration 9 minutes is the default Snooze can be used several times during alarm 5 To adjust the brightness of the display press and release the Snooze Dimmer Button during normal operation when no alarm is sounding to cycle through the display brightness settings Sleep and Nap Modes This unit all
3. IBN43 NFC Bluetooth Wireless FM Clock Radio with USB Charging instruction manual Questions Contact Customer Service at 1 800 288 2792 Introduction iBN43 Thank you for purchasing the iHome iBN43 This product is designed to provide high quality wireless sound for your iPad iPhone iPod computer or other Bluetooth audio device The dual alarms on this iHome clock radio can be set and used independently so you can program each alarm to wake you up to a paired Bluetooth device 4 separate alarm tones the FM stereo radio or a buzzer alarm You may set each alarm for weekday weekend or everyday operation and even adjust the alarm volume separately from your normal listening volume If the power is out at your selected wake up time the SureAlarm battery backup system will activate the electronic buzzer alarm to get you up on time even This instruction booklet explains the basic operation and care of the unit Please read them carefully and keep for future reference This unit features NFC near field communication technology which allows you to wirelessly connect your NFC enabled device to instantly pair and play See your device s user manual for details on how to interact with NFC devices If your Bluetooth device does not support NFC you can pair it manually with this unit Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat e Protect your furniture when p
4. cece cee e ete ee tete ee teeeeeteteeeetteeeees 5 Troubleshooting cist testachiduteciety clean E ied t Meal eae Oe eee 6 Consumer Product SatetyiGuidee 74 s2etisda eh etchant det A id e AAA Madinah 17 18 FEC lhtormidhionie Aste teh arta ek athe ted nit eed tA cnt at Natale A del cacermadedl laut 9 WV QUITO E crass aioe ays eal eh elon sanyo E luted vss omer ve E dogs 20 Included B N43 e iBN43 system e 100V 240V universal AC adaptor 100V 240V universal AC adaptor iIBN43 Meet Your iBN43 Top Wakeup Alarm Skip Landscape insert area Button Alarm 1 amp Alarm 2 Buttons Nap Pairing Button Sleep Button Bluetooth E pu peii NFC Antenna Area qualizer J j Time Set Button Microphone Volume Up Button Mode Button Volume Down Button Plus Setting Button Play Pause Presets Button Minus Setting Button Talk Button Snooze Dimmer End Button Button Meet Your iBN43 iIBN43 Back DC Jack USB Charging Port Aux in Jack A f FM Antenna Bottom Backup Battery Compartment Pu II Ta b 1 p battery backup unscrew to open door Remove the pull tab before initial use to activate the SureAlarm battery backup system The Display Using the iBN43 Time Display Alarm Active I
5. does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket 6 Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc 7 Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product 17 Attachments Do not use attachments not recommended by the product manufacturer Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of
6. ect one of four built in tones Tone 1 Tone 4 Wake to Buzzer You will wake to the buzzer alarm 7 Press the Alarm 1 Button to confirm the wake to source setting The alarm volume display will flash Continued on next page 7 Setting and Using the Alarms cont d Using the iIBN43 8 Press the or Buttons to adjust the alarm volume on the unit Note that the alarm volume setting is stored separately from other volume settings 9 Press the Alarm 1 Button to confirm the alarm settings and exit alarm setting mode 2 beeps will confirm alarm setting is complete The alarm icon will remain on the display indicating the alarm is armed Previewing the Alarm and Turning the Alarm On Off 1 Press and release the Alarm Button to view the current alarm time and wake o source 2 While preview is active within 5 seconds press and release the Alarm Button as needed to toggle the alarm ON and OFF indicated by the alarm icon and a beep Alarm Skip If Alarm 1 or Alarm 2 is active press and release the Wakeup Alarm Skip Button to skip the next pending alarm time The display will show ALM 1 SKIP or ALM 2 SKIP until the specified alarm time is passed then alarm skip is deactivated and the unit returns to normal alarm function Setting the Gentle Wake Timer The unit has an adjustable Gentle Wake feature that gradually increases the volume of the alarm from O5 up to the set wake volume over time the default duration is 1
7. hear the ring tone and PHONECALL appears on the display Press the gt Talk Button to answer the call or press the End Button to ignore it 2 When the call is completed press the s End Button to end the call and resume previous function Call waiting Press the s Talk Button to put the current call on hold and answer a new one Press again to return to the previous call toggle between calls Redial Press the ss Talk Button twice 2X to dial the last called number 12 Playing Audio via Aux In l neo N Using the iBN43 Connect one end of a standard stereo 3 5mm audio cable not included into the aux in jack on the back of the unit and the other end into the headphone or output jack of your audio device Press the Power Button on the unit fo turn it on Press and release the Mode Button as needed until AUXIN appears on the display Turn on your audio device and put it in play mode Press the or Buttons to adjust the volume on the unit You may need to adjust the volume on your device too When done listening press the Power Button to turn the unit off Remember to tun off your audio device too Charging Devices via USB Port 1 NOTE unit must be plugged into working outlet to charge devices Connect the standard size end of a USB cable not included to the USB Port on back of the unit and connect the other end to the charging port on your device Monitor the charg
8. ing on your device Some devices use a proprietary charging method and will not charge using the USB Port If this happens you must charge your devic using the charger that came with it 13 Using the iBN43 Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges By default this unit is set to USA frequency steps To use the radio outside the USA 1 Make sure unit is OFF Press and hold the Mode Button for 5 seconds until USA appears in the display Press and release or Buttons to cycle to your location Europe Japan Australia China or USA Press the Mode Button again to exit frequency setting mode Using the iIBN43 Note 2 AA batteries are included in the unit Please pull out the battery pull tab before you use the unit This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out The battery backup circuit requires two AA batteries included When the backup batteries are getting weak the Low Backup Battery Indicator will begin flashing in the sass When you see this flashing indicator you should replace the backup batteries as soon as possible Follow steps 1 3 below to install the replacement ba
9. it has 2 separate alarms each set the same way Below we explain how to set alarm 1 To set alarm 2 follow the same steps using the Alarm 2 Button 1 Press and hold the Alarm 1 Button for 2 seconds until the alarm time flashes at the bottom of the display 2 Press the or Buttons to adjust the display to the desired alarm time hold for rapid setting Make sure you set the correct AM PM alarm time The AM and PM indicators appear to the right of the alarm time display 3 Press the Alarm 1 Button to confirm the alarm time setting The alarm schedule display will flash 4 Press the or Buttons to select the desired wake schedule wake 7 days every day of the week wake weekdays Monday through Friday wake weekends Saturday and Sunday 5 Press the Alarm 1 Button to confirm the alarm schedule setting The wake o source display will flash 6 Press the or Buttons to select the desired wake to alarm source Bluetooth BT radio tone or Setting and Using the Alarms buzzer Wake to Bluetooth BT You will wake to the currently linked Bluetooth device If no device is detected the alarm will default to current Tone Wake to Radio Press the Alarm 1 Button to confirm radio mode selection Press the gt t Presets Button to select an FM preset to wake to or press the or Buttons to tune in a desired wake to station Wake to Tone Press the Alarm 1 Button to confirm tone mode selection Press the or Buttons to sel
10. lacing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit Table of Contents iBN43 Mest YOUPIBINA ics sadist E Meet dit E on ET atthe sewage AEN saint Susie ETA N T 1 3 The Display Setting Up he Uniti a0 ise het hue eae ate mae tae NEN 4 Selting the Clock ENM RII Osis rina e N acl tenn Peep ona Bees Covet ee aaan teats 5 S ttingvarid Wsing FM Presets seceserseacencenstshesentauaa sensed tan eta sates noiae 6 Setting and Using the Alarms tac vs ects Wis Nee geile cron a Ss he ae dt a tenia as 7 8 Previewing and Turning Alarm Off Setting Gentle Wake Timer ccccccceeecceeeseeeteettteetteeeteee 8 Snooze Dimmer Button Sleep and Nap Modes o 0c cccccccceseeececeeteteeeteseeeteteeetssteseneens 9 Using Bluetooth Pairing amp Playing Your Device Using NFC O Pairing Your Devices Manali eee atese aea E a a Beene 1 Playing Audio Via Bluetooth Using the Speakerphone ccccccceceseceetsceeseetseeeueeeteeetseenses 2 Playing Audio Via Auxin Charging Devices via USB Port 0 cccccceecceceeeeteeetseettseeteeeteenses 3 sings EM Radio in Other Counttiesy narenn enera tiara ist dn le ee een 4 Replacing and Installing Clock Backup Batteries 00 ccccc
11. n outofwarranty fee for service will be charged for units that are received without proof of purchase Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Call SDI Customer Service at 1 800 288 2792 for Return Authorization and for the address of the Factory Service Center 2 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box SDI is not responsible for damage that occurs during shipping to the Factory Service Center 3 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period Also include your name and address intormation a brief description for why the unit is being returned and the return authorization number No unit can be processed without a return authorization number 4 Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Service Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons
12. ndicator PM AM Indicators Bluetooth Indicator Low Backup Battery Indicator Date Alarm time Mode Indicator Radio Bluetooth Aux in Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet Using the iIBN43 Setting the Clock 1 Press and hold the Equalizer Time Set Button for 2 seconds until the clock display flashes and unit E ore Buttons to adjust the clock to the current time hold for rapid setting Make sure you set the correct AM PM time The AM and PM indicators appear to the left of the display To toggle the clock display between standard 12 hour time and 24 hour military time display press the Alarm 1 or Alarm 2 Button during time setting Press the Equalizer Time Set Button again to confirm the time The year will flash Press the or Buttons to adjust the display to the current year hold for rapid setting 4 Press the Equalizer Time Set Button to confirm the year The date wil flash Press the or Buttons to adjust the display to the current month and date hold for rapid setting 5 Press the Equalizer Time Set Button to confirm the time and exit clock setting mode 2 beeps will contirm clock setting is complete FM Radio 1 Press and release the Mode Button as needed until the current FM radio station appears on the display 2 Press the or Button
13. on the iBN43 display will stop flashing then the Bluetooth icon will remain N p 4 Press the Dil Play Pause Presets Button play or pause audio Press the or w Buttons to adjust the volume on the unit You can also adjust volume on your device 6 When done listening press the Power Button to turn the unit OFF Remember to turn off your audio device too NOTE To disconnect your device simply touch it again on the NFC antenna area on top of the unit n 10 Using the iBN43 1 Turn on your Bluetooth enabled device and turn on Bluetooth capability as described in the device s Pairing Your Device Manually user manual 2 Press the Power Button to turn the unit ON 3 Press and release the Mode Button as needed until BLUETOOTH appears on the display 4 Press and hold the Nap Pairing Button on the top of the unit for 2 seconds to begin pairing the unit with your device The Bluetooth icon will flash on the display indicating pairing attempt iHome iBN43 should appear on your device s menu If Not Paired Not Connected or similar message appears on your device select iHome iBN43 on the device to connect it If your device asks for a password enter 1234 on device s keypad lt Settings Bluetooth lt w mea Bluetooth Bivetooth Ta MANE preon visam E MANE PON 63 G3 Bluetooth mr Qo DECES towers MINED DEV MINED DEV r acea i iHome iBN43 SO Home ipnas F
14. or iPhone SC RVA ees For other TN sits a If no device is paired within 3 minute a tone will sound and the unit will revert to its previous mode To retry pairing turn the unit OFF then back ON then follow steps 2 4 again 5 Once paired with a device the Bluetooth indicator on the display will stop flashing but the Bluetooth icon will remain On some devices you must then select Use as Audio Device or similar on the device s Bluetooth menu Once paired your device should link to the iBN43 whenever within range 11 Playing Audio Via Bluetooth Using the iBN43 1 Press and release the Mode Button as needed until BLUETOOTH appears on the display 2 Press the Pll Play Pause Presets Button on the unit to play audio from your linked Bluetooth device 3 Press the or Buttons on the unit fo go to the previous or next track This function may be disabled on some devices 4 Press the or Buttons to adjust the volume on the unit To adjust the tone press and release the Equalizer Time Set Button as needed to cycle to Treble Bass Balance or 3D Sound then press the or Buttons to adjust for best sound 5 When done listening press the Power Button to turn the unit off Remember to turn off your audio device too Using the Speakerphone NOTE The unit does NOT have to be powered on to receive a call A Bluetooth phone must be linked 1 When a call is received playing music is muted to
15. ows you to sleep or nap to the current sound source 1 To set Sleep time press and release the Sleep Button as needed to cycle to the desired sleep duration 120 90 60 30 or 15 minutes or OFF turns the unit off 2 Press the or Buttons to adjust the sleep volume on the unit Note that the sleep volume setting is stored separately from other volume settings 3 To set Nap time press and release the Nap Button as needed to cycle to the desired nap duration 5 10 15 20 30 45 60 90 or 120 minutes or OFF turns the nap alarm off 9 Using the iBN43 Using Bluetooth Pairing and Playing Your Device Using NFC This unit features wireless NFC pairing which allows playing NFC enabled devices to pair and play instantly For pairing non NFC devices please see the following section Pairing Your Device Using Standard Bluetooth 1 Turn on your Bluetooth enabled NFC enabled device and turn on Bluetooth and NFC capability as described in the device s user manual 2 Place your NFC enabled device in play mode 3 Touch the NFC area of your playing device against the N NFC antenna area on top of the unit The unit will turn on and enter automatic pairing mode The Bluetooth icon will flash on the display indicating pairing attempt iHome ZE LAN iBN43 should appear on your device s menu If your device mode asks if you wish to pair accept select Yes or similar Once paired with a device the Bluetooth indicator
16. rrect the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAN ICES 3 B NMB 3 B The device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance QDID D024962 Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best fo first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI will repair or at its discretion replace this product without charge This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service The product must include proof of purchase including date of purchase A
17. s device complies with Industry Canada licenceexempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e NOTE This equipment has cee tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to co
18. s to tune the radio to the desired station hold for 2 seconds to search for the next clear station Extend the FM antenna for best reception Continued on next page FM Radio cont d Using the iBN43 3 Press the or Buttons to adjust the volume on the unit To adjust the tone press and release the Equalizer Time Set Button as needed to cycle to Treble Bass or Balance then press the or Buttons to adjust for best sound 4 When you are through listening press the Power Button to turn the unit off Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets 1 Press and release the Mode Button as needed until the current FM radio station appears on the display 2 Press and release the pil Presets Button as needed until the preset number P1 P6 you wish to sets is displayed then press and hold the gt it Presets Button to enter setting mode One beep will sound 3 Press the or Buttons to tune the radio to the desired station hold to scan for the next clear station 4 Press and release the gt t Presets Button to confirm 2 beeps will sound to confirm the preset has been assigned Repeat steps 2 4 until you have set up to 6 preset stations 5 To listen to a preset FM station at any time press and release the Mode Button as needed to turn on FM radio mode then press and release the pu Presets Button as needed to cycle to the desired preset Using the iBN43 This un
19. ti cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable M the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product 2015 SDI Technologies Inc All rights reserved Questions Visit www ihome com or call 1 800 288 2792 Toll Free iBN43 011915 A Printed in China
20. time This will prevent damage to the product due to lightning and powerline surges Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when the power supply cable or plug has been damaged objects have fallen into or liquid has been spilled into the enclosure the unit has been exposed to rain the unit has been dropped or the enclosure damaged he unit exhibits a marked change in performance or does not operate normally mUV S Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Questions Visit www ihome com or call 1 800 288 2792 Toll Free iBN43 FCC Information FCC ID EMOIBN43 aoe IC 986B IBN43 FCC Radiation Exposure Statement This pan complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter Thi
21. tteries To replace the backup batteries Replacing Backup Batteries IMPORTANT When replacing the backup batteries be sure to have the unit connected to the AC outlet to maintain all of your settings otherwise it will be necessary to reset the time and alarm time after the battery is replaced 1 Remove the battery cover located on the bottom of the unit and remove the exhausted AA batteries 2 Insert 2 fresh AA batteries in the backup battery compartment with the ends facing as shown 3 Replace the battery compartment cover Confirm that the backup battery indicator is not flashing in the display Note Make sure you dispose of all batteries properly see your local regulations Replacing and Installing Clock Backup Batteries For models that require more than one battery Do not mix with used or other battery types brands Do not heat above 75 C 167 F e Replace all batteries at the same time e Do not expose contents to water e Do not open batteries e Do not charge or recharge Do not dispose of in fire e Do not instal backwards Troubleshooting Unit doesn t respond no power e Check that all connections are correct and properly plugged in e Make sure your device is properly paired with the iBN43 e Make sure the Power is ON Unit doesn t respond locked up or frozen The unit may need to be reset To do so disconnect the unit from AC power and remove the backup batteries Let unit sit for 3
Download Pdf Manuals
Related Search