Installation manual high hinged column
Contents
1. Picture 04 Unscrew the locking bolt using a too dimension across flats 24 mm so it lays free on the brace Picture 05 By pulling the pin down the hinge column will be unlocked Picture 07 By unscrewing the winch counter clockwise the arm will come out a little Picture 06 Install the lifting handle with hexagon extension piece on the axis of the winch Picture 08 lf the arm does not come out a little bring the arm just past the dead point with your hand Picture 09 Picture 10 Tilt the column by turning the winch to the left Note During operation it is prohibited to If the winch is operated there must be a visual stand in the area of the hinged arm motion of the arm If it does not stop turning and control Picture 11 Keep turning until the column is tilted to the buffer at the height of the hinge point Make sure that the column is lowered slowly Stop running at time so there will be a light tension at the cord Depending the column height the angle is variable lt a ama Dann nee 9 SS Z T n i tm If My hi i P l E VAI B i i F i Ii W gf i j gA 4 A i E t 4 Raising the column Picture 12 Picture 13 Turn the winch clockwise to see the column At the end note the cord isn t twisted and right If the winch is operated there must be a goes into the column without any knots visual motion of the arm If it does not stop turning2. Sapa Manual high hinged columns MEN 28 002 R01 6 8 10 12 meter The purpose of this manual is to provide the installer service technician sufficient information to install and operate the Sapa high hinged column in a responsible manner Therefore the quality of Sapa lighting columns will be guaranteed This user manual provides information about Sapa s high hinged columns and any accessories It is assumed that the installer service technician has sufficient knowledge and experience to work on building construction and electrical installations It is also assumed that the installer service technician has the basic knowledge of safety and competence necessary to operate machines and tools required for the operation of the column Attention Read this manual before using the hinged column Always wear personal protection equipment helmet gloves and safety glasses During operation it is prohibited to stand in the area of the hinged arm The cord of the winch must be moved in free space and should not come into contact with any sharpen objects When the winch is operated there must be a visual motion of the arm If there is not stop turning and control If visual damage to the cord is detected raise the column carefully and contact Sapa Lowering the column Picture 01 Unscrew the 2 bolts from the door Picture 03 Remove the padlock and turn on the safety pin to the left Picture 02 Remove the door
3. and control_Note During operation it is prohibited to stand in the area of the hinged arm Picture 14 Picture 15 Turning up the arm Stop running at time so Lock the column by pushing the pin up there will be a light tension at the cord Make Put the handle of the pin in the parking sure the cord is properly wound as well and position remove the lifting handle with hexagon extension piece Picture 16 Picture 17 Then tighten the locking bolt with the tool Turn the handle of the pin to the right so it dimension across flats 24 mm lays on the brace AN 4 re d N k 3 me i A DLANE t Picture 18 a Picture 19 Place the padlock so it blocks the handle Re fit the door Picture 20 Tighten the 2 bolts to the door Sapa Pole Products Alcoalaan 12 5151 RW Drunen Netherlands Telephone 31 416 386200 Fax 31 416 386230 www sapapoleproducts com
Download Pdf Manuals
Related Search