User manual
Contents
1. is the warrantor in relation to this product Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used under license from Koninklijke Philips N V UM_SHB3060_3080_27_EN_V1 0 wk15192. EN 9 7 Frequently asked questions My Bluetooth headphones do not switch on The battery level is low Charge the headphones cannot pair my Bluetooth headphones with a mobile phone The Bluetooth is disabled Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones Pairing does not work Make sure the headphones are in pairing mode e Follow the steps described in this user manual see Pair the headphones with your mobile phone on page 4 ake sure that the LED light flashes blue and white alternately before you release Do not stop holding the button if you see he blue LED only The mobile phone cannot find the headphones e The headphones may be connected to a previously paired device Turn off the connected device or move it out of range e Pairing may have been reset or the headphones have been previously paired with another device Pair the headphones with the mobile phone again as described in the user manual see Pair the headphones with your mobile phone on page 4 Voice dialing or redialing does not work on my mobile phone Your mobile phone may not support this feature The other side cannot hear me on the mobile phone 10 EN The microphone is muted Press once to enable the microphone My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone but music only plays on the mobile phone speak
3. Always there to help you Register your product a T upport at www philips com suppor Gum SHB3060 en SHB3080 Philips User manual PHILIPS Contents 1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Bluetooth wireless headphones 3 What s in the box 3 Other devices 3 Overview of your Bluetooth wireless headphones 3 3 Get started 4 Charge your headphones 4 Pair the headphones with your mobile phone 4 4 Use your headphones 5 Connect the headphones to a Bluetooth device E Manage your calls and music 5 Wear your headset 6 5 Technical data 7 6 Notice 8 Notice of compliance 8 Disposal of your old product and battery 8 Trademarks 9 7 Frequently asked questions 10 EN 1 Important safety instructions Hearing Safety Danger e To avoid hearing damage limit the time you use headphones at high volume and set the volume to a safe level The louder the volume the shorter the safe listening time is Be sure to observe the following guidelines when using your headset e Listen at reasonable volumes for reasonable periods of time e Be careful not to adjust the volume continuously upwards as your hearing adapts Do not turn up the volume so high that you can t hear what s around you You should use caution or temporarily discontinue use in potentially hazardous situations Excessive sound pressure from earphones and headphones can c
4. ause hearing loss e Using headphones with both ears covered while driving is not recommended and may be illegal in some areas while driving e For your safety avoid distractions from music or phone calls while in traffic or other potentially dangerous environments General information To avoid damage or malfunction 2 EN EE Caution Do not expose headphones to excessive heat Do not drop your headphones Headphones shall not be exposed to dripping or splashing Do not allow your headphones to be submerged in water Do not use any cleaning agents containing alcohol ammonia benzene or abrasives If cleaning is required use a soft cloth if necessary dampened with a minimum amount of water or diluted mild soap to clean the product The integrated battery shall not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type About operating and storage temperatures and humidity e Operate or store in a place where temperature is between 15 C 5 F and 55 C 131 F up to 90 relative humidity e Battery life may be shorter in high or low temperature conditions 2 Your Bluetooth wireless headphones Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome With this P
5. er Refer to the user manual of your mobile phone Select to listen to music through the headphones The audio quality is poor and crackling noise can be heard The Bluetooth device is out of range Reduce the distance between your headphones and Bluetooth device or remove obstacles between them The audio quality is poor when streaming from the mobile phone is very slow or audio streaming does not work at all Make sure your mobile phone not only supports mono HSP HFP but also supports A2DP see Technical data on page 7 hear but cannot control music on my Bluetooth device e g play pause skip forward backward Make sure the Bluetooth audio source supports AVRCP see Technical data on page 7 After using Google Now music starts playing through the mobile phone speaker instead of headphones but Bluetooth is still connected what can do Press the Siri Google now button again music will resume playing from the headphones How can restore all original headphones settings When the headphones are powered off press and hold for 10 seconds The headphones are powered on entered the pairing mode and then powered off The factory setting is reset For further support visit www philips com support PHILIPS 2015 Gibson Innovations Limited All rights reserved This product has been manufactured by and is sold under the responsibility of Gibson Innovations Ltd and Gibson Innovations Ltd
6. hilips wireless on ear headphones you can e enjoy convenient wireless handsfree calls e enjoy and control wireless music e switch between calls and music What s in the box Philips Bluetooth wireless headphones SHB3060 SHB3080 Quick start guide Other devices A mobile phone or device e g notebook PDA Bluetooth adapters MP3 players etc which supports Bluetooth and is compatible to the headphones Overview of your Bluetooth wireless headphones C Pil Music Call control button LED indicator 0 Power button Microphone O Pairing Mute button Micro USB charging slot se Go UE Volume Track control 3 Get started Charge your headphones E e Before you use your headphones for the first time charge the battery for 5 hours for optimum battery capacity and lifetime Use only the original USB charging cable to avoid any damage Finish your call before charging the headphones as connecting the headphones for charging will power the headphones off Connect the supplied USB charging cable to e the USB connector of the headphones and e USB power source gt LED turns white during charging and turns off when the headphones are fully charged Tip Normally a full charge takes 3 hours Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the first time pair it with a mobile
7. ng two conditions O This device may not cause harmful interference and O This device must accept any interference received including interference that may cause undesired operation FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 8 EN environment This equipment
8. on Headphones status Indicator EN 5 The headphones are connected to a Bluetooth device while the headphones in standby mode or while you are listening to music The blue LED flashes for every 8 seconds The headphones are ready for pairing The LED flashes blue and white alternately The headphones are on but not connected to a Bluetooth device The blue LED flashes quickly Low battery Battery is fully charged The white LED flashes 3 times for every 150 seconds until it is out of power White LED is off Wear your headset Adjust the headband to fit your head Tip e After use twist the headphones for easy storage 5 Technical data e 11 hours of music time or talk time e 200 hours of standby time Normal time for a full charge 3 hours e Rechargeable Lithium Polymer battery 230 mAh e Bluetooth 3 0 Bluetooth mono support Headphones Profile HSP Hands Free Profile HFP Bluetooth stereo supported Advanced Audio Distribution Profile A2DP Audio Video Remote Control Profile AVRCP e Operating range Up to 10 meters 33 feet e Digital echo amp noise reduction Auto power off Note e Specifications are subject to change without notice 6 Notice Notice of compliance Notice for US This set complies with the FCC rules Part 15 and with 21 CFR 1040 10 Operation is subject to the followi
9. phone A successful pairing establishes a unique encrypted link between the headphones and mobile phone The headphones store the last 4 devices in the memory If you try to pair more than 4 devices the earliest paired device is replaced by the new one 1 Make sure that the headphones are fully charged 4 EN 2 Press and hold Q to turn the headphones on 3 Press and hold until the blue and white LED flashes alternately 4 Tum on the Bluetooth function of your mobile phone t The headphones are in pairing mode for 2 minutes 5 Pair the headphones with the mobile phone For detailed information refer to the user manual of your mobile phone The following example shows you how to pair the headphones with your mobile phone 1 Activate the Bluetooth feature of your mobile phone select Philips SHB3060 SHB3080 2 Enter the headset password 0000 4 zeros if prompted For those mobile phones featuring Bluetooth 3 0 or higher no need to enter a password Philips SHB3060 Add Enter Password Bluetooth device Philips SHB3080 Add Philips SHB3080 Enter Password Bluetooth device 0000 4 Use your headphones Connect the headphones to a Bluetooth device 1 Tumon your mobile phone Bluetooth device 2 Press and hold for 2 seconds to turn the headphones on L gt The blue LED flashes L gt The headphones are reconnected to the last connected mobile phone Bluetooth device automatically If
10. should be installed and operated with a minimum distance of 20cm between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter Caution Changes or modifications made to this equipment not expressly approved by Philips may void the FCC authorization to operate this equipment Model number SHB3060 SHB3080 Trade Name Philips Responsible party P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 1 866 310 0744 Notice for Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Canadian ICES 003 IC Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Disposal of your old product and battery as Your product is designed and manufactured with high quality materials and components which can be recycled and reused This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or rec
11. the last one is not available the headphones will try to reconnect to the second last connected device Fir e Ifyou turn on the mobile phone Bluetooth device or activate the Bluetooth feature after turning on the headset you have to reconnect the headset and mobile phone Bluetooth device manually E e Ifthe headset fails to connect to any Bluetooth device within range in 5 minutes it will switch off automatically to save the battery life Manage your calls and music Turn the 0 Press and hold for 4 headphones seconds off L gt The white LED is on and fades out Music control Task Button Operation Play or G Press once pause music Adjust Volume track Press once volume control or press and VOL hold Skip Volume track Press once forward control gt Skip Volume track Press twice backward control Call control Task Button Operation Pick up hang up C Press once a call s gt esp Reject an C Press and hold Pil incoming call for 2 seconds gt 1 long beep Switch caller Volume Press once during a call track gt 1 beep control Mute unmute the J Press once microphone in L gt 1 beep a call Voice control On off Task Button Operation Task Button Operation Siri Google Now Press once Turn the Y Press and hold for 2 headphones seconds Other headphones indicator status
12. ycling information please contact your local authorities or visit www recycle philips com This product contains non removable batteries Do not incinerate Batteries may explode if overheated e For disposal or recycling information please contact your local authorities or visit www recycle philips com Remove the integrated battery Make sure the headset is disconnected from the USB charging cable before removing the battery fthere is no collection recycling system for electronic products in your country you can protect the environment by removing and recycling the battery before disposing the headset Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Gibson Innovations is under license Siri is a trademark of Apple Inc registered in the U S and other countries Google Google and the Google Logo are registered trademarks of Google Inc
Download Pdf Manuals
Related Search